Series IPT (26482 Type) Bayonet Coupler
|
|
|
- Cordelia Chambers
- 5 years ago
- Views:
Transcription
1 IPT330 eedthrough with Jack-to-Jack RJ45 Sample Part Number IPT330 02PP G 18 5E 1 7 RJ45 Category 2 IPT330 Material/inish 02PP = ront Panel Mount Square lange receptacle G = Insert grounded to shell; Omit for none (Use only with G3, 11 or 7 finish) or Cat 6A applications consult factory 6 = Aluminum/Black Polymer Electrocoat 7 = Aluminum/Conductive Black Zinc Nickel 11 = Aluminum/Electroless Nickel 1. See Section A for recommended panel cut out dimensions 2. eedthrough is jack/jack layout Code RONT PANEL SQUARE LANGE MOUNT RECEPTACLE.618(15.7) +.004(+.1) -.0(-.0) (34.89) Max 1.311±.004 (33.3 ±.1) (28.57) (28.57) Ø1.125 Ø ±.004 (1.6±.1).122±.005 (3.1 ±.12) 1.063±.004 (27.0 ±.1) Rear Connector View with RJ45 Jack Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog
2 IPT303 with Jack to Solder Cup Termination Sample Part Number IPT G 18 5E 1 7 RJ45 Orientation Options (Plug Shown) CODE 1 CODE 3 IPT = ront Panel Square lange Mount 07 = Rear Panel Mount Jam Nut G = Insert grounded to shell Omit for none (Use only with G3, 11 or 7 finish) Code RJ45 1 Category 2 or Cat 6A applications consult factory Material/inish 02 - RONT PANEL MOUNT SQUARE LANGE RECEPTACLE 6 = Aluminum/Black Polymer Electrocoat 7 = Aluminum/Conductive Black Zinc Nickel 11 = Aluminum/Electroless Nickel 07 - REAR PANEL MOUNTING JAM NUT RECEPTACLE 1.311±.004 (33.3 ±.1) 1.626±.016 (41.3 ±.4) CODE 2 CODE 4 Ø (3.1) Solder cup layout ( Orientation Shown) See Section A for recommended panel cut out dimensions and solder cup layout (15.7) Ø (28.57) ±.004 (1.6 ±.1) 1.063±.004 (27.0 ±.1) (36.67) Max.15±.02 (3.69 ±.50) Ø.980 (24.9) (28.57) (3.2) Max 1.417±.016 (36.0 ±.4) (36.1) Max.878±.016 (22.3 ±.4) Ø.980 (24.9).15±.02 (3.69 ±.50).118±.004 (3.0 ±.1) 2016 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog -7
3 IPT302 with Jack to PC Tail Termination Sample Part Number IPT G 18 5E 1 7 RJ45 Orientation Options (Plug Shown) CODE 1 CODE 3 IPT = ront panel Mount Square lange 07 = Rear Panel Mount Jam Nut G = Insert grounded to shell Omit for none (Use only with G3, 11 or 7 finish) Code RJ45 1 Category 2 or Cat 6A applications consult factory Material/inish 02 - RONT PANEL MOUNT SQUARE LANGE RECEPTACLE 6 = Aluminum/Black Polymer Electrocoat 7 = Aluminum/Conductive Black Zinc Nickel 11 = Aluminum/Electroless Nickel 1.311±.004 (33.3±.1) 07 - REAR PANEL MOUNTING JAM NUT RECEPTACLE 1.626±.016 (41.3 ±.4) CODE 2 CODE 4 PC tail layout ( Orientation Shown) See Section A for recommended panel cut out dimensions.ø 122±.005 (3.1 ±.12) (15.7) ±.004 (1.6 ±.1) Ø (28.57) ±.004 (27.0 ±.1) (34.2) Max.020±.002 (.50)±.05 Ø1.051 (26.7).133±.001 (3.37 ±.03).0175±.003 (.44 ±.06) +.0 Ø ±.016 (36.0 ±.4) 34.2 Max (1.346).878±.016 (22.3 ±.4).118±.004 (3.0 ±.1).126 (3.2) Max.020±.002 (.50 ±.05).0175±.0025 (.445 ±.0635).133±.001 (3.37 ±.03) Ø1.051(26.7) Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog
4 IPT301 Connector with Accessory Threads and RJ45 Plug (Plug) or Jack () to Crimp Removable Contacts Sample Part Number IPT G 18 5E 1 7 Connector Style RJ45 Category IPT301 Material/inish 00 = ront Panel Mount Square lange 01 = In-Line 02 = ront Panel Square lange Mount 07 = Rear Panel Mount Jam Nut 070 = Rear Panel Mounting Jam Nut 06 = Straight Plug G = Insert grounded to shell Omit for none (Use only with G3, 11 or 7 finish) or Cat 6A applications consult factory 6 = Aluminum/Black Polymer Electrocoat 7 = Aluminum/Conductive Black Zinc Nickel 11 = Aluminum/Electroless Nickel 1. See Section A for recommended panel cut out dimensions Code PLUG WITH ACCESSORY THREADS Ø1.378±.008 (35.0 ±.2) (59.4) Max Crimp Layout ( Orientation Shown) UNE-2A Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog
5 IPT301 Connector with Accessory Threads and RJ45 Plug (Plug) or Jack () to Crimp Removable Contacts 01 - INLINE RECEPTACLE WITH ACCESSORY THREADS Ø1.307 ±.004 (33.2 ±.1).618(15.7) +.004(+.1) -.0(-.0) (54.47) Max Ø1.125(28.57) +.0(+.00) -.004(-.10).063±.004 (1.6±.1) UNE-2A REAR PANEL MOUNTING JAM NUT RECEPTACLE WITH ACCESSORY THREADS 1.626±.016 (41.3 ±.4).878±.016 (22.3 ±.4) (54.47) Max Ø1.125 (28.57) +.0(+.00) -.004(-.10) 1.417±.016 (36.0 ±.4).126 (3.2) Max UNE-2A.118±.004 (3.0 ±.1 ) 00 - RONT PANEL MOUNT SQUARE LANGE RECEPTACLE WITH ACCESSORY THREADS 1.311±.016 (33.3 ±.4) 1.063±.004 (27.0 ±.1).618(15.7) +.004(+.1) -.0(-.0) (54.47) Max Ø.122±.005 (3.1 ±.12) +.0(+.00) Ø1.125(28.57) -.004(-.10).063±.004 (1.6 ±.1) UNE-2A 2016 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog -5
6 IPT300H Connector and Backshell with Banding Porch and Boot Groove Sample Part Number IPT300H 00 G 18 5E 1 ZL 7 IPT300H 00 = ront Panel Mount Square lange 01 = In-Line 070 = Rear Panel Mount Jam Nut 06 = Straight Plug G = Insert grounded to shell Omit for none (for use with shielded cable and G3, 11 or 7 finish) RJ45 Category (or Cat 6A applications consult factory) Backshell Material/inish ZL = Backshell with Banding Porch and Boot Groove 6 = Aluminum/Black Polymer Electrocoat 7 = Aluminum/Conductive Black Zinc Nickel 11 = Aluminum/Electroless Nickel HEAT SHRINK BOOT CODE 1 CODE 3 CODE 2 CODE 4 Must be ordered separately Type 9 flexible polyolefin short profile boots have an operating temperature range of -40 C to 100 C and provide very good resistance to fuels, oils and solvents. These boots fit most standard boot adapters for circular connectors and are specifically designed for low temperature rated CAT5e and USB cables. 1. See Section A for recommended panel cut out dimensions CONNECTOR AND BACKSHELL WITH INTEGRAL BANDING PORCH AND BOOT GROOVE ~3.66 (93) ~3.07 (78) Glenair P/N : S903W2 Ø.62 (15.8) Ø Ø.44 (11.1) Ø Ø Ø.62 (15.8) 2016 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog -9
7 ITS340H Connector and Backshell with Pigtail Sample Part Number IPT300H 00 G 18 5E 1 T ZL 1 7 RJ45 Category IPT300H 00 = ront Panel Mount Square lange with Accessory Threads 01 = In-Line 070 = Rear Panel Mount Jam Nut with Accessory Threads 06 = Straight Plug G = Insert grounded to shell (use only with 11 or 7 finish and shielded cable) Omit for none or Cat 6A applications consult factory Shrink Boot T = Shrink Boot Omit for none Backshell Cable Length Material/inish ZL = Backshell with Banding Porch and Boot Groove.5 meter; order in.5 meter increments (approximately 20 inches) 7 = Aluminum/Conductive Black Zinc Nickel 6 = Aluminum/Black Polymer Electrocoat 11 = Aluminum/Electroless Nickel 1. See Section A recommended panel cut out dimensions 06 - PLUG X.XX Meters ~5.16 (131) Code2 X.XX Meters ~4.57 (116) Cable to be ordered in 0.5 meter increments Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog
8 IPT300H Connector and Backshell with Internal Metric Thread Sample Part Number IPT300H 00 G 18 5E 1 M 7 RJ45 Category IPT300H 00 = ront Panel Mount Square lange with Accessory Threads 01 = In-Line 070 = Rear Panel Mount Jam Nut with Accessory Threads 06 = Straight Plug G = Insert grounded to shell (Use only with G3, 11 or 7 finish) Omit for none or Cat 6A applications consult factory Backshell M = M16 x 1.5 Internal Thread PG9 = PG9 Internal Thread Material/inish 6 = Aluminum/Black Polymer Electrocoat 7 = Aluminum/Conductive Black Zinc Nickel 11 = Aluminum/Electroless Nickel 1. See Section A for recommended panel cut out dimensions Code2 CONNECTOR AND BACKSHELL WITH M16 X 1.5 OR PG9 INTERNAL THREAD ~5.08 (129) 3.86 (98) M16 x 1.5 or PG9 M16 x 1.5 or PG Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog -11
9 IPT300H Connector and Backshell with Cable Gland and Optional Pigtail Sample Part Number IPT300H 00 G 18 5E 1 M RJ45 Category IPT300H RJ45 Orientation 1, 2, 3 or 4 00 = ront Panel Mount Square lange with Accessory Threads 01 = In-Line 070 = Rear Panel Mounting Jam Nut 06 = Straight Plug G = Insert grounded to shell (Use only with G3, 11 or 7 finish) Omit for none or Cat 6A applications consult factory Metallic Cable Gland Cable Length Material/inish M1, M2, MS1, MS2 (see metallic cable gland table) 0.5 = 0.5 meter increments; I.E. 1.5 = 1.5 meters 6 = Aluminum/Black Polymer Electrocoat 7 = Aluminum/Conductive Black Zinc Nickel 11 = Aluminum/Electroless Nickel Code2 Metallic Cable Gland Type Cable Range Shield M (6-8 mm) No M (8-10) No MS (6-8 mm) Yes MS (8-10) Yes 1. See Section A for recommended panel cut out dimensions Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog
10 IPT300H Connector and Backshell with Cable Gland and Optional Pigtail PLUG AND RECEPTACLE WITHOUT PIGTAIL 3.19 (81) 2.56 (65) See Metallic Cable Gland Table See Metallic Cable Gland Table PLUG AND RECEPTACLE WITH PIGTAIL X.XX Meters X.XX Meters Cable to be ordered in 0.5 meter increments 2016 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog -13
11 IPT300 Coupler with Accessory Threads and RJ45 Plug-to-Jack (Plug) or Jack-to-Jack () Sample Part Number IPT G 18 5E 1 7 RJ45 Category 2 IPT300 Material/inish 00 = ront Panel Mount Square lange 01 = In-Line 070 = Rear Panel Mounting Jam Nut 06 = Straight Plug G = Insert grounded to shell Omit for none (Use only with G3, 11 or 7 finish) or Cat 6A applications consult factory 6 = Aluminum/Black Polymer Electrocoat 7 = Aluminum/Conductive Black Zinc Nickel 11 = Aluminum/Electroless Nickel Code RONT PANEL MOUNT SQUARE LANGE RECEPTACLE WITH ACCESSORY THREADS 1.063±.004 (27.0 ±.1) 1.311±.016 (33.3 ±.4).618((15.7)) +.004(+.1) -.0(-.0) (37.7) Max UNE-2A Ø1.125(28.57) +.0(+.00) -.004(-.10) Ø.122±.005 (3.1 ±.12).063±.004 (1.6±.1) Rear Connector View with RJ45 Jack 1. See Section A for recommended panel cut out dimensions 2. Plugs are plug/jack and receptacles are jack/jack Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog
12 IPT300 Coupler with Accessory Threads and RJ45 Plug-to-Jack (Plug) or Jack-to-Jack () 01 - INLINE RECEPTACLE WITH ACCESSORY THREADS (37.4) Max Ø1.307±.004 (33.2 ±.1).618(15.7) +.004(+.1) -.0(-.0) +.0(+.00) Ø1.125(28.57) -.004(-.10).063±.004 (1.6±.1) Rear Connector View with RJ45 Jack UNE-2A REAR PANEL MOUNT JAM NUT RECEPTACLE WITH ACCESSORY THREADS 1.626±.016 (41.3 ±.4).878±.016 (22.3)± (37.66) Max +.0(+.00) Ø1.125(28.57) -.004(-.10) 1.417±.016 (36.0 ±.4).126 (3.2) Max UNE-2A.118 ±.004 (3.0 ±.1) Rear Connector View with RJ45 Jack 06 - PLUG WITH ACCESSORY THREADS Ø1.378 ±.008 (35.0 ±.2) (53.0) Max UNE-2A Rear Connector View with RJ45 Jack 2016 Glenair, Inc 1211 Air Way, Glendale, CA U.S. CAGE code SuperSeal Catalog -3
SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION
RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL
P and P Receptacle PCB Hole Patterns
Series 79 790-028P and 790-043P 790-028P and 790-043P This section contains printed circuit board footprints for vertical mounted Series 79 receptacles. The contact identification numbers are shown for
Topside / Shipboard Environmental Connectors
eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its-mb reverse-bayonet mil-c-5015 type / VG95234 EQUIVAEN arine Bronze eries I-B connectors are compliant with VG95234, using
Topside / Shipboard Environmental Connectors
Seacrow Marine Bronze IPT-MB marine bronze connectors ipt-mb mil-c-26482 bayonet type / V95328 Compliant Marine Bronze Series IPT-MB connectors are the choice for reliability when 20-16 AW signal cables
8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail
FR ITS RJ45-1 W PHM F6
CODE SCALE SERIES SHEET WEIGHT CODE SCALE SERIES DESCRIPTION SHEET.2x45 R.2 Max. Max. specific indicationweight DATE File:RECEPTACLE_FEMM--PCB_3 - Copia DESCRIPTION.2x45 R.2 Max. Max. DATE File:RECEPTACLE_FEMM--PCB_3
8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
MIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
MIL-DTL-38999Series III Composite Series
MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors
2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
PCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
WEIGHT / COST-SAVING Dummy Contact Sealing Plugs (DCSP) For reliable sealing of unused contact cavities without the use of electrical contacts
Sealing Plugs (DCSP) For reliable sealing of unused contact cavities without the use of electrical contacts The use of color-coded M27488 type plastic sealing plugs in unused contact cavities is a requirement
Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example
Coupling nut Plugshell O-Ring O-Ring Cable clamp 2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example Shell ring Plugshell O-ring: Shell: The Plugshell O-Ring is designed to help to maintain
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
Cannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation
How to order VG Order reference Series Shell style Dash Shell size Contact arrangement Contact type Contact termination Insulator position Explanation Series Shell style VG95234 A 32 6 S 1 N VG95234 J1,
SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS
SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS JUNE 2014 SEACROW CONNECTORS Marine Bronze Connectors for Harsh Environmental Applications Shipboard Application Glenair
Amphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS
CA-COM Industrial Connectors
CA-COM Industrial Connectors ITT Corporation ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial
Band Tool Kits M81306/1-01 and M81306/1-02 Operating Instructions
Band Tool Kits M81306/1-01 and M81306/1-02 1 M81306/1 Standard and Micro Tool Overview 4 3 1 6 2 7 5 1 Calibration Access Plug (See Note 3) 2 Tensioning Lever: Squeeze with short gentle strokes to tighten
38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies
8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07
WIRING INSTRUCTIONS FOR IT-FRIT (MIL-DTL-C-5015G) AND ITB-ITS-FRITS (VG95234) CONNECTORS
WIRING INSTRUCTIONS FOR IT-FRIT (MIL-DTL-C-5015G) AND ITB-ITS-FRITS (VG95234) CONNECTORS JUNE 2016 for IT - FRIT (MIL-C-5015G) and ITB - ITS - FRITS (VG 95234) Connectors The aim of this book is to show
Series 801 Hermetic Receptacles feature 304L stainless steel shells, fused vitreous glass insulators and Alloy 52 iron alloy contacts.
801-012 Series 801 Hermetic Receptacle Double-Start AM Threads How to Order Information Series 801 Hermetic Receptacles feature 304L stainless steel shells, fused vitreous glass insulators and Alloy 52
HT STRAIGHT ADAPTER, WRENCH FLATS ( )
HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS
SCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
QwikConnect INTERCONNECT SOLUTIONS INDUSTRIAL STRENGTH GLENAIR JANUARY 2014 VOLUME 18 NUMBER 1
QwikConnect GLENAIR JANUARY 2014 VOLUME 18 NUMBER 1 INDUSTRIAL STRENGTH INTERCONNECT SOLUTIONS INNOVATION Performance Durability Ease of Use Geo-Marine QwikConnect GLENAIR JANUARY 2014 VOLUME 18 NUMBER
QwikConnect INTERCONNECT SOLUTIONS INDUSTRIAL STRENGTH GLENAIR JANUARY 2014 VOLUME 18 NUMBER 1
QwikConnect GLENAIR JANUARY 2014 VOLUME 18 NUMBER 1 INDUSTRIAL STRENGTH INTERCONNECT SOLUTIONS INNOVATION Performance Durability Ease of Use NO GAPS Industrial/Rail Interconnect Solutions Series ITS Reverse-Bayonet
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
BAND-IT Tie-Dex II Banding Tools Operating Instructions
BAND-IT Tie-Dex II Banding Tools 600-058 600-061 1 Band-It Standard, Micro and Nano Overview 1 Calibration Access Plug 2 Tensioning Lever: Squeeze with short gentle strokes to tighten band to the proper
Band-Master ATS Banding Tools and Operating Instructions
Band-Master ATS Banding Tools 601-100 and 601-101 Step 1 Prepare Cable Braid for termination process NOTE: banding must occur on an unfixtured cable assembly. Attaching a band to a firmly clamped cable
Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
High-Speed DataLink Transmission Connectors
Photo: izban Train, Central Data Bank at English Wikipedia DataLink Transmission USB, RJ45 and Quadrax Interconnects in Sealed, Ruggedized M515 and M26482 Type Packaging U n i t e d S t a t e s U n i t
Miniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
VG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications.
AMPHENOL PCD SHENZHEN ASGTC Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications 1 www.amphenolpcd.com.cn CONTENT CONTENT ASGTC Series Connector structure.........
about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
MIL-DTL Micro-D Connector
Specication MIL-TL-83513 Micro- onnector MIL-TL-83513 Micro- onnector R04J Series rimp ontact Type nvironment temperature: ~ Vibration: 10z~2000z, 196m/s Random vibration: Power spectrum density 0.4 z
MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE
MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE ABOUT US VGL Impex Pty Ltd, trading as Allied Connectors, is an Australian based distributor of industrial electrical components and complementary products.
MIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
Cover headline Cannon Cover headline Nemesis Series
Cover Cannon headline Cover Nemesis headline Series 2 Nemesis Series By choosing the Nemesis range you will be reassured you are working with a partner who has more than 90 years of experience of connector
VG95351 and VG96934 Qualified Connectors VG96934 TEN PIN CONNECTORS AND ACCESSORIES
V95351 and V96934 Qualified onnectors Series onnectors V96934 TN PIN ONNTORS N SSORIS V96934 STYL ONIURTION SRIPTION P STYL able plug with two piece shielded backshell Page 30 STYL lange mount receptacle
Features and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling Ordering Guide for 2M805 Plug & Receptacle 2M805 Series Connector - Alternate Series Style Service Class Insert Arrg. Contact Type Position 2M805-00X -16 C 15-37 S A SERIES
HERMETIC. Hermetic Connectors. High Performance Sealing Solutions
HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover
97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
RJF TV. Amphenol ROHS. Ethernet Connection System for Harsh Environment. Part Number Code RJF TV
RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
38999 All In One! Series III Integrated Backshell
38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell
NFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013
NF F 61030 Qualified C onn ec to r s ith series Easy-to-AssemblY, Power and Signal Reliable Reverse Bayonet Coupling June 2013 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High
VG95351E7. O-Ring for use with Style B flange mount connector Glenair, Inc. CAGE Code Printed in U.S.A.
Series onnectors V95351 and V96934 Qualified onnectors V95351 and V96934 Qualified Products bout The V Specifications The erman ederal Office of efense Technology and Procurement (W) establishes procurement
Electrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
REVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS
RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical
Electrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
PART NUMBER BREAKDOWN
SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options
PART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools
2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...
Shell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
Series 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
8T Series. MIL-DTL Series II
Contents Overview 8T Series - Presentation... 06 8T Series - Applications... 06 A universal product platform... 07 Space saving... 08 ox solutions... 08 Shell types... 08 Features by shell types... 09
Miniature Rugged Connector Series
Miniature Rugged Connector Series Miniature Rugged Connector Series Intended for harsh environment applications and used extensively in soldier communications, Amphenol Terrapin is a miniature series of
CL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V
CL-3/1297 INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V Contents Introduction... 2 Features... 3 How to Order... 4 Part Number Explanation... 5 Technical Data... 6 250 / 500 Volt Contact Arrangements...
Dielectric withstanding voltage Contact resistance
Modular Connectors MOD series Modular Connectors Outline MOD series connectors comply with FCC and NTT standards, allowing them to be used for international products. Features Because these connectors
VG95234 Qualified Bayonet-Lock Connectors
Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
MIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
Proven Quality, Reliability & Expertise
CA Threaded Catalog Proven Quality, Reliability & Expertise ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy,
8LT SERIES. Aerospace & Military Bayonet Connectors. MIL-DTL Series I
8LT SERIES Aerospace & Military Bayonet Connectors Contents Overview 8LT Series Presentation... 06 8LT Series Applications... 06 A universal product platform... 07 Contact layouts... 08 Contact layouts
Features and Application
ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release
Cannon Trident Connector System
is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs for
Series 77 Full Nelson Environmental Shrink Boots. For Tough, Dependable Sealing of Interconnect Cable Assemblies
Series 77 Full Nelson Environmental Shrink s For Tough, Dependable Sealing of Interconnect Cable Assemblies United States United Kingdom Germany France Nordic Italy Spain Japan Think he ll ever break that
Micro-D TwistPin Connectors and Accessories Product Selection Guide
Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and
µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the
WILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
Waterproof Circular Connectors Conforming to European Safety Standards
Waterproof Circular Connectors Conforming to European Safety Standards CE05 Series Conforming Standard MIL-DTL-5015 Wa t e r p r o o f IP 67 OUTLINE The industrial machinery including the machine tools
Series 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
D X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
IPT SE and IPT Series
IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs
MIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
HBB power connector. Product description
HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and
HV HV Series Connector and cable assembly
Amphenol Amphenol PCD Shenzhen HV HV Series Connector and cable assembly www.amphenolpcd.com.cn CONTENT HV Series connector and cable assembly PRODUCT INTRODUCTION............ 2 HOW TO ORDER: RECEPTACLE.........
8N45S NC Series Non-safety classified connectors for EPR reactors
Description Quick-connect ¼ turn bayonet coupling mechanism Straight backshell with sealing gland and cable clamp Integrated 60 ground termination mechanism compliant with EPR reactors wiring specifications
ITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
45 YEARS OF EXPERIENCE
ENGINE CONNECTORS 45 YEARS OF EXPERIENCE High Performance Connectors for Critical Environment Temperature Up to 350ºC / 662ºF Vibrations Fire Corrosion 45 YEARS OF EXPERIENCE OLD PRODUCTS DBA 3x NEW GENERATION
THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
HyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
Temposonics. R-Series Analog. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Measuring length mm
R-Series Analog Temposonics Absolute, Non-Contact Position Sensors R-Series Analog Temposonics RP and RH Measuring length 50-7600 mm 100% field adjustable Null and Span Rugged Industrial Sensor Linear
Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
POLAMCO HIGH POWER CONNECTORS STYLE
POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded