PART NUMBER BREAKDOWN

Size: px
Start display at page:

Download "PART NUMBER BREAKDOWN"

Transcription

1 SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options are available. Notes: 1. ll dimensions are in Inches 2. See Section G for torque information 3. O-Ring not supplied with interface (does not affect environmental capability) 4. Lanyard, if specified, attached with a stainless steel band COMPERO IDENTIFIER INTERFCE SEE SECTION TLE 1 SERIES IDENTIFIER PRT NUMER REKDOWN CP 34 1 W D S EYELET OR SECURITY RING OPTION OMIT FOR NONE SEE TLE 3 & TLE 4 LNYRD LENGTH (OMIT FOR NONE) IN INCHES, INCREMENTS (4.5 = 4 1/2 INCHES) NGLE STRIGHT- 1 MTERIL & FINISH SEE SECTION LNYRD STYLE (OMIT FOR NONE) SEE TLE 2 SHORTING CP LENGTH OPTION (L) OMIT FOR INCREMENTS (10 = 2.50 ) SHELL SIZE SEE SECTION TLE 2 COUPLING RING OPTION OMIT FOR STNDRD ROTTLE D -DIRECT COUPLING E -SET-LOCK S -SELF LOCKING T - SFETY WIRE HOLES W -WRENCH FLTS SEE SECTION H FOR MORE DETILS 28

2 O-Ring Sealed Shorting Cap SERIES 34 See Section for Thread,, C and D Dimensions LNYRDS #8 Sash Chain Wire Rope with choice of Jacket Material ead Chain Nylon Rope, lack SOLID RING DI ORDERING CODE X R S G Y T U TLE 3 EYELET SPECIFICTIONS Dash Number EYELET DI DI 00 No Eyelet (3.6) (4.2) (5.0) (3.2) (4.0) (4.6) (4.9) (5.5) TLE 2 - LNYRD OPTIONS No ccessory DESCRIPTION Wire Rope, PVC Jacket ead Chain Sash Chain Nylon Rope, lack Wire Rope, Nylon Jacket Wire Rope, Teflon Jacket Wire Rope, Polyurethane Jacket TLE 4 SOLID RING SPECIFICTIONS Dash Number DI (13.0) (14.8) (18.0) (20.0) (23.0) (26.0) (30.0) (32.2) (36.3) (39.0) (42.6) (44.7) (48.0) (54.4) (61.1) (67.5) 29

3 SECTION Section - Connector Interface Compaero manufacturers connector accessories for most circular connector series. This section provides information on the more common interfaces. If the desired interface is not shown please contact Compaero. Table 2 contains Threads and dimensions of commonly used connector series. If the required dimensions are not shown please contact Compaero. TLE 1 - CONNECTOR INTERFCE SPECIFICTION Interface Code Connector Class MIL-DTL-5015 Crimp (MS3400,MS3406; MS3450, MS3456,MS3459) MIL-DTL Series II (MS3470,MS3476) MIL-DTL Series I & III MIL-DTL-5015 Solder (MS3100,MS3106) See Table 3 K MIL-DTL Series II C MIL-DTL Left Hand Thread DK MIL-DTL Series I Solder (MS3110, MS3116) E MIL-DTL F MIL-DTL Series I & II G MIL-DTL H MIL-DTL Series III & IV J MIL-DTL Series 1, 2, 3 & 4 V ITT VEM Reverse ayonet S9522, F0017 Patt.105 V S9522, N0001 Patt.603 TLE 3 - CONNECTOR INTERFCE When selecting an accessory with Interface use the chart below to specify the connector manufacturer being used. If the connector manufacturer is not known please contact Compaero. When generating a part number place the manufacturer letter found below directly after the Interface. Shell size of the connector accessory should match the connector shell size. Example: CP491W-1404 The indicates the connector is MIL-DTL-5015 Solder. The indicates the Connector Manufacturer is mphenol Class. The 14 indicates the mphenol Connector is a shell size 14. Manufacturer Letter C R Connector Manufacturer and/or Connector Class mphenol - Class (lue Insert) endix - Class, E & R Cannon - Class, E & R mphenol - Class R (Resilient Insert) 8 Catalog Compaero, Inc. - Supporting The erospace & Defense Industry Since 1989

4 Section - Connector Interface SECTION TLE 2 - CONNECTOR INTERFCE TLE INTERFCE (FROM TLE 1) DIMENSIONS FROM SERIES SPECIFICTION D E F G H THRED REF C REF D REF (INT) D REF (INT) /16-28 UNEF (F) 09 () M12 X 1-6H (H) 08 1/2-20 UNF () /16-24 UNEF ().188 (F) 11 () M15 X 1-6H (H) 10 5/8-24 UNEF () /16-24 UNEF (F) 13 (C) M18 X 1-6H (H) () 3/4-20 UNEF () /16-20 UNEF (F) 15 (D) M22 X 1-6H (H) () 7/8-20 UNEF () /16-20 UNEF (F) 17 (E) M25 X 1-6H (H) (C) 1-20 UNEF () /16-18 UNEF ().188 (F) 19 (F) M28 X 1-6H (H) 17 (D) 1 1/8-18 UNEF /16-18 UNEF ().188 (F) 21 (G) M31 X 1-6H (H) 19 (E) 1 1/4-18 UNEF /16-18 UNEF ().188 (F) 23 (H) M34 X 1-6H (H) (F) 1 7/16-18 UNEF ().188 (F) 25 (J) M37 X 1-6H (H) /2-18 UNEF () 25 (G) 1 9/16 - UNEF /4-18 UNS () 29 (H) 1 7/8-16 UN UNS () 33 (J) 2 1/16-16 UNS /4-16 UN () /2-16 UN () /4-16 UN () UN () 5

5 SECTION Section - Material and Finish Compaero employs traceable methods when sourcing and using material. ll manufacturer certifications are kept on file and are available upon request. For more information please contact Compaero. Component arrels arrel Castings raid / Shield Clamp odies Clamp Grommets, ushings Clamp Nuts Clamp Saddles Clamp Hardware Coupling Rings E-Nuts Ferrules Followers O-Rings Retaining Rings Self Locking Clips Material luminum lloy 380 Tinned Copper per QQ-575 Neoprene, Silicone or Fluorosilicone 300 Series 300 Series Silicone 300 Series Non Corrosive material 6

6 Section - Material and Finish SECTION Compaero Ordering Code Table 1 shows common Compaero finishes and their Mil-Spec equivalents (where applicable). dditional finishes are available upon request. TLE 1 - Common Material and Finish Codes S85049 Material Finish C luminum F N luminum H N/ luminum W W luminum P X luminum D Y luminum T Z luminum Y N/ luminum Z N/ luminum K K KP KD KT KN S XS YS ZS N/ lack anodize - In accordance with Class 2 of MS--8625, Type II. -65 to +175 C Electroless nickel - In accordance with MS-C or MS to +200 C Clear Cadmium - SE-MS-QQ-P-416 Type II Class 2 over electroless nickel, 1000 Hour Salt Spray, Conductive -65 to +175 C Cadmium, Olive drab over suitable underplate, 1000 hour salt spray -65 to +175 C Nickel fluorocarbon polymer. Nickel with fluorocarbon polymer additives over a suitable underplate to withstand Pure dense electrodeposited aluminum in accordance with MIL-DTL-83488, Type II, to withstand 500 hours of salt Zinc nickel, lack, in accordance with STM 841 over suitable underplate to withstand 1000 hours of salt spray testing. Zinc-Cobalt, Olive Drab, STM 840 Grade 6 Type D over electroless nickel, 350 Hour Salt Spray, Conductive -65 to +175 C Zinc-Cobalt, lack, STM 840 Grade 6 Type D over electroless nickel 350 Hour Salt Spray, Conductive -65 to +175 C lack cadmium - In accordance with MS-QQ-P-416, Type II, Class to +175 C Passivate - In accordance with MS-QQ-P-35, MS 2700, or STM to C Nickel fluorocarbon polymer. Nickel with fluorocarbon polymer additives over a suitable underplate to withstand Pure dense electrodeposited aluminum in accordance with MIL-DTL-83488, Type II Zinc nickel in accordance with STM 841 over suitable underplate to withstand 1000 hours of salt spray testing Electrodeposited Nickel per SE-MS-QQ-N-290 Class 1 Grade F M T Composite Composite material without plating MJ J Composite Olive drab cadmium plate in accordance with MS-QQ-P-416. To withstand 2000 hour salt spray. Fnish shall be electrically conductive. -65 to C ML L Composite Cadmium (olive drab) over electroless nickel, selective plating -65 to +175 C MM M Composite Electrically conductive electroless nickel plating. Finish shall withstand 2000 hour salt spray. -65 to +200 C 7

7 Section G - Recommended Torque Information SECTION G Connector ccessories onto Connector Threads Torque Values are in Inch-Pounds Shell Size MIL-DTL-5015 (MS3100) MIL-DTL MIL-DTL MIL-DTL S1 MIL-DTL S1 & S2 MIL-DTL-5015 (MS3400) MIL-DTL S2 MIL-DTL MIL-DTL S3 & S4 MIL-DTL MIL-DTL , , , , , , , , , Cable Clamps onto ackshells Torque Values are in Inch-Pounds Clamp Entry Size Torque Value in Inch-Pounds Cable Clamp Hardware (Screws) Thread Torque Value in Inch-Pounds /

8 SECTION H Section H - Coupling Ring Options Style 2 Coupling Rings When the specified cable entry exceeds dimension C on the connector interface side, Style 2 will be used. Style 2 adapters will maintain environmental sealing and EMI/RFI shielding (if specified in the series). The specified overall length on a Style 2 adapter will be increased by 1.25 maximum, however, will be kept as minimal as possible. To specify a one piece adapter (Style 1 when Style 2 should be used) place a modification code -014 at the end of the part number when ordering. Modification Code Example: CP461W-1410-VG0-014 Direct Coupling Rings (Option D) Direct coupling rings can be specified on most Compaero adapters and backshells. elow is a diagram of a direct coupling ring when called out on a straight adapter or backshell. When specifying direct coupling on 45 and 90 degree parts a screw in adapter will be supplied. Safety Wire Holes (Option T) Safety wire holes can be specified on standard rotatable coupling rings to use with safety wire after installation. Safety wire ensures the coupling ring will not un-couple during shock and/or vibration. These are common on S85049 accessories. When this option is specified the coupling ring will have 3 equally spaced wire holes (120 degrees apart). Safety Wire Holes are sufficient to accommodate inch wire. 16

9 Section H - Coupling Ring Options SECTION H Wrench Flat Coupling Rings (Option W) Common on most TCOM adapters, wrench flats are an available option on most Compaero adapters and backshells. Wrench flats allow for an easier way of screwing on the coupling ring (with a wrench) when working in tight spaces. For specifications on specific wrench flat dimensions (based on shell size and connector series) please contact Compaero. Self-Locking Coupling Rings, Detent (Option S) Detent style self locking feature a ratcheting coupling ring using non corrosive clips located within the coupling ring. Many S85049 specifications specify this detent style self locking coupling ring making this one of the most popular ways of achieving a self locking adapter or backshell. Seat-Lock Coupling Rings, Non-Detent Self-Locking (Option E) Using a spring loaded retaining ring, Compaero Seat-Lock coupling rings are a non detent way to achieve self locking. This option also ensures that the accessory teeth of the connector mate properly with the teeth on the adapter or backshell by applying constant force between the two. The Compaero Seat-Lock option is an excellent choice if an easy, economical self locking solution is required. How To Order: CP461WD VG0-8 COUPLING RING OPTION OMIT FOR STNDRD ROTTLE D -DIRECT COUPLING E -SET-LOCK S -SELF LOCKING T - SFETY WIRE HOLES W -WRENCH FLTS 17

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10 SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental

More information

06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING

06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS

More information

HT STRAIGHT ADAPTER, WRENCH FLATS ( )

HT STRAIGHT ADAPTER, WRENCH FLATS ( ) HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS

More information

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.

More information

8D Series D38999 Aluminum Series

8D Series D38999 Aluminum Series onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle

More information

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL

More information

2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools

2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools 2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...

More information

Amphenol 97 Series MIL-DTL-5015

Amphenol 97 Series MIL-DTL-5015 Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.

More information

Series 80 Mighty Mouse Technical Reference Complete Product Specification

Series 80 Mighty Mouse Technical Reference Complete Product Specification Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)

More information

MIL-DTL 38999Series III Aluminium Series

MIL-DTL 38999Series III Aluminium Series MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI

More information

ITT Cannon KJL Series MIL-DTL Series I Connectors

ITT Cannon KJL Series MIL-DTL Series I Connectors APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING

More information

MIL-DTL-83723, Series III, Matrix

MIL-DTL-83723, Series III, Matrix MIL-DTL-, Series III, TBLE OF CONTENTS FOR SECTION MIL-DTL-, SERIES III, MTRIX Wide Variety of Coupling Styles & Options... Class Descriptions, Performance Specifications, Quick Reference Chart.... Insert

More information

2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M

2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M Push-Pull Receptacles Protection aps Ordering Guide for 2M667-202 Push-Pull Protective aps are available in plug and receptacle versions. Protective caps keep the connector interface dry and clean while

More information

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev ) MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:

More information

97 series crimp type plugs with solid shells

97 series crimp type plugs with solid shells 97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24

More information

8D Series D38999 Composite Series

8D Series D38999 Composite Series Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC

More information

2M805 Tri-Start Threaded Coupling

2M805 Tri-Start Threaded Coupling 2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among

More information

MIL-DTL Series III Connectors

MIL-DTL Series III Connectors RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection

More information

MIL-DTL-38999Series III Composite Series

MIL-DTL-38999Series III Composite Series MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors

More information

8D Series D38999 Composite Series

8D Series D38999 Composite Series Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail

More information

Amphenol Industrial Threaded AIT

Amphenol Industrial Threaded AIT mphenol Industrial Threaded IT IT Series is a low cost, MILDTL5015 threaded type connector for use in harsh environmental conditions. This popular, cylindrical connector is particularly well suited to

More information

MIL-DTL Series 1 Solder Type PT

MIL-DTL Series 1 Solder Type PT MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally

More information

D X X - XX - XX - X X

D X X - XX - XX - X X CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium

More information

38999 All In One! Series III Integrated Backshell

38999 All In One! Series III Integrated Backshell 38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell

More information

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series

More information

MIL-DTL Series IV Connectors

MIL-DTL Series IV Connectors DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide

More information

MIL-C Fiber Optic Connectors

MIL-C Fiber Optic Connectors Developed and produced by Packard-Hughes Interconnect (PHI), the MIL-C-28876 Fiber Optic Connector features low optical insertion loss, repeatability, exceptional strain relief, and reliability in harsh

More information

38999 Series III Composite Connectors

38999 Series III Composite Connectors 8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility

More information

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer. This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the

More information

AS85049/88/89/90 SERIES

AS85049/88/89/90 SERIES AS85049/88/89/90 SERIES EMI/RFI Composite Backshells MIL-DTL Specification EMI/RFI Composite Backshells Overview Features & Benefits QPL AS85049, D38999 & MS Qualified SUNBANK offers a wide range of qualified

More information

Series 804 Push-Pull Mighty Mouse Protective Cover Ordering Information

Series 804 Push-Pull Mighty Mouse Protective Cover Ordering Information T Electronic omponents, Inc. Protective over Ordering Information and 809-198 807-198 Plug over See next page for ordering info Protect onnectors From Damage Machined aluminum covers prevent ingress of

More information

Features and Application

Features and Application MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact

More information

Features and Application

Features and Application ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release

More information

A Complete Miniature Range Threaded, Break Away, Bayonet

A Complete Miniature Range Threaded, Break Away, Bayonet omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical

More information

Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors

Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-

More information

Now Available in Black Zinc Nickel

Now Available in Black Zinc Nickel 847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances

More information

The CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com

The CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com Series t a lance Series Ruggedized High-Power Connectors The Series of heavy duty connectors is ideal for rugged industrial or military applications that demand high-power delivery. Standardized parts

More information

VG95328 Qualified Bayonet-Lock Connectors

VG95328 Qualified Bayonet-Lock Connectors Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving

More information

MIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS

MIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS QUICK REFERENCE GUIDE Wide Range Mil spec, commercial, and composite Full line of finishes, including black zinc nickel and PTFE nickel High Performance Environmentally sealed DEUTSCH MIL-DTL-38999 SERIES

More information

WILDCAT CONNECTORS

WILDCAT CONNECTORS UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS

More information

D-subminiature Backshells - Two-Piece D*H Series

D-subminiature Backshells - Two-Piece D*H Series Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature

More information

Rail Product Selection Guide. Proven rail expertise. Global capabilities.

Rail Product Selection Guide. Proven rail expertise. Global capabilities. Rail Product Selection Guide Proven rail expertise. Global capabilities. We Connect When it matters most. UNDER CAR TRAIN CONTROL ITT Veam and Cannon connectors support today s advanced train control systems,

More information

EN3716 SAE AS81659 ARINC

EN3716 SAE AS81659 ARINC 6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical

More information

Allen Electric Connector Sales, Inc. (AECS, Inc.)

Allen Electric Connector Sales, Inc. (AECS, Inc.) Allen Electric Connector Sales, Inc. (AECS, Inc.) A Woman owned small business since 1996, AECS, Inc. offers military circular electric connectors, connector accessories, custom design connectors, custom

More information

Mil-Spec Backshells and Connector Accessories

Mil-Spec Backshells and Connector Accessories Mil-Spec ackshells and onnector ccessories U n i t e d S t a t e s U n i t e d K i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n n Important Notice for ll uyers of Military Standard ylindrical

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order

More information

Heavy and Off Road Vehicle Product Selection Guide

Heavy and Off Road Vehicle Product Selection Guide Heavy and Off Road Vehicle Product Selection Guide We Connect When it matters most Resistant to shock, vibration, water and other fluids, humidity, mud, dust, heat, cold and virtually anything else you

More information

VG95234 Qualified Bayonet-Lock Connectors

VG95234 Qualified Bayonet-Lock Connectors Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical

More information

8T Series. MIL-DTL Series II

8T Series. MIL-DTL Series II Contents Overview 8T Series - Presentation... 06 8T Series - Applications... 06 A universal product platform... 07 Space saving... 08 ox solutions... 08 Shell types... 08 Features by shell types... 09

More information

Amphenol 348 Series High Density Connectors

Amphenol 348 Series High Density Connectors 348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................

More information

DETAIL SPECIFICATION SHEET

DETAIL SPECIFICATION SHEET INCH-POUND MIL-DTL-24308/24H 8 June 2018 SUPERSEDING MIL-DTL-24308/24H w/amendment 4 8 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL,

More information

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS

Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS Mighty Mouse Cobra TECHNICL SPECIICTIONS 0-0 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell ssemblies Sample Part Number 0-0-2 ZNU

More information

µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors

µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the

More information

SCE. Snatch Connector Electrical Series

SCE. Snatch Connector Electrical Series SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,

More information

General Specifcations

General Specifcations General Specifcations GS 11M12WZ-01-E Specifcations for model WZ Heater and Signal Cables for Oxygen Detectors The WZ-H cables supplied by Yokogawa Corporation of merica (YC) are compatible with all Yokogawa

More information

DETAIL SPECIFICATION SHEET

DETAIL SPECIFICATION SHEET INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL

More information

KJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features

KJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features Applications Features High Performance ilitary Aircraft Commercial Airlines Communications Equipment Armored Personnel Carriers & Tanks Quick ating A three point bayonet coupling system that not only makes

More information

High Density Interconnects

High Density Interconnects Contents ection Description Pages Insert rrangement 40 How To Order HD38999 4 Contact and Technical Data 42 Receptacles Wall ount Receptacle 43 Wall ount Double Flange Receptacle 43 Line Receptacle 44

More information

MIL-DTL-83723, Series III, Pyle

MIL-DTL-83723, Series III, Pyle MIL-DTL-83723, Series III, TALE OF CONTENTS FOR SECTION Design Features, Customer Options, Specifications.... 8, 9 Quick Reference of Choices - Threaded Styles.... 20-22 Quick Reference of Choices - ayonet

More information

KVBS Reverse bayonet connectors for railway applications

KVBS Reverse bayonet connectors for railway applications Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and

More information

Amphenol AIT/MS Series MIL-DTL-5015

Amphenol AIT/MS Series MIL-DTL-5015 mphenol IT/MS Series MIL-DTL-5015 PPLICTIONS ENVIRONMENTLLY-SELED FOR CHLLENGING ENVIRONMENTS The MIL-DTL-5015 IT/MS series is a cost-effective threaded circular connector for use in harsh environments.

More information

MIL-DTL-83723, Series III, Pyle

MIL-DTL-83723, Series III, Pyle ML-DTL-83723, Series, TLE OF CONTENTS ML-DTL-83723, Series, : Design Features, Customer Options, Manufacturer s Specifications.... 363, 364 Quick Reference of Choices - Threaded Styles............... 365-367

More information

Amphenol MIL-DTL-83723, Series III, Pyle

Amphenol MIL-DTL-83723, Series III, Pyle Amphenol MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS MIL-DTL-83723, Series III, Pyle : Design Features, Customer Options, Manufacturer s Specifications. 363, 364 Quick Reference of Choices - Threaded

More information

MCX SERIES. Description. Applications. Microminiature Coaxial Connectors

MCX SERIES. Description. Applications. Microminiature Coaxial Connectors MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance

More information

Direct grounding from PCB to shell Avoid the risk of breaking contact tails High resistance to vibration & shock Time saving & easy assembling

Direct grounding from PCB to shell Avoid the risk of breaking contact tails High resistance to vibration & shock Time saving & easy assembling Direct grounding from PCB to shell void the risk of breaking contact tails High resistance to vibration & shock ime saving & easy assembling Prevent echanical tress on the older Joint 50151 EIE I ODEING

More information

MDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features

MDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features MDM Applications Features MIL-DTL-83513 STYLE As the result of the miniaturization of today s sophisticated electronics where more and more electronics are being packed into smaller and lighter electronic

More information

Miniature Break Away Release Connector

Miniature Break Away Release Connector 8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:

More information

WHEN YOU NEED THE BEST IN 5015 CONNECTORS

WHEN YOU NEED THE BEST IN 5015 CONNECTORS WHEN YOU NEED THE BET IN 5015 CONNECTO 702-802-2555 www.crownconnector.com TBE OF CONTENT 5015 Connectors...................................... 2 everse Bayonet Connectors.......................... 12

More information

MIL-DTL-83723, Series III, Pyle

MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS Table of Contents....................... 37 Design Features, Customer Options, Manufacturer s Specifications. 38, 39 Quick Reference of Choices - Threaded Styles......... 40-42 Quick Reference

More information

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20

More information

Amphenol. Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors

Amphenol. Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors Bombardier Transportation Design Guide for Amphenol GT Series Reverse Bayonet Coupling Connectors -2123 Date: 10-01-2004 FOR USE BY BOMBARDIER & BOMBARDIER S SUBCONTRACTORS Amphenol Table of Contents Page

More information

Circular. Cannon VG/CA-Bayonet

Circular. Cannon VG/CA-Bayonet Cannon VG/C-Bayonet Introduction Cannon C-Bayonet series was designed in accordance with the VG95234 specification. This versatile and highly reliable connector series is an improvement on the well established

More information

MIL-C Circular Connectors

MIL-C Circular Connectors MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers

More information

micro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999

micro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999 micro38999 SERIES High Vibration Miniature onnectors Qualified ccording MIL-TL-38999 8, 8 & 8LT Series Presentation The micro38999 Series (8, 8 and 8LT ranges) is made to meet a new generation of applications

More information

Electrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms

Electrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms Applications Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Description Screw

More information

MS/Standard DL-Class Pre-Earth type

MS/Standard DL-Class Pre-Earth type MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety

More information

OCS (Oval Contact System) Connectors

OCS (Oval Contact System) Connectors offers the High Perfmance Interconnect Solution f your High Speed Needs. The OCS* (Oval Contact System) is the newest 38999 Interconnect Product offering that provides many advantages f high speed data

More information

HERMETIC. Hermetic Connectors. High Performance Sealing Solutions

HERMETIC. Hermetic Connectors. High Performance Sealing Solutions HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover

More information

CA-COM Industrial Connectors

CA-COM Industrial Connectors CA-COM Industrial Connectors ITT Corporation ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial

More information

Proven Quality, Reliability & Expertise

Proven Quality, Reliability & Expertise CA Threaded Catalog Proven Quality, Reliability & Expertise ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy,

More information

MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE

MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE MILITARY MOTORSPORT INDUSTRIAL PRODUCT RANGE ABOUT US VGL Impex Pty Ltd, trading as Allied Connectors, is an Australian based distributor of industrial electrical components and complementary products.

More information

MIL-C-5015 Bulkhead Receptacles

MIL-C-5015 Bulkhead Receptacles I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient

More information

MIL-C Series 4 PART NUMBER CONSTRUCTION

MIL-C Series 4 PART NUMBER CONSTRUCTION MIL-C-38999 - eries 4 PART NUMBR CONTRUCTION D38999 / 40 W F 35 P N Alternative Orientation Contact Type Insert Configuration Class tyle Military Prefix COD HLL TYL COD HLL IZ / 40 Wall Mount Receptacle

More information

Cannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation

Cannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation How to order VG Order reference Series Shell style Dash Shell size Contact arrangement Contact type Contact termination Insulator position Explanation Series Shell style VG95234 A 32 6 S 1 N VG95234 J1,

More information

Bellows-Sealed Valves

Bellows-Sealed Valves www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and

More information

Amphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.

Amphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors. mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,

More information

How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE

How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use

More information

HBB power connector. Product description

HBB power connector. Product description HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and

More information

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010

More information

AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications.

AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications. AMPHENOL PCD SHENZHEN ASGTC Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications 1 www.amphenolpcd.com.cn CONTENT CONTENT ASGTC Series Connector structure.........

More information

ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED

ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED DEUTSCH ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED Reliable and Versatile Range of Connectors for Harsh Environment Aerospace and Military Applications CONTENTS Introduction 03 Technical

More information

Connector Accessories AC ACC

Connector Accessories AC ACC Connector ccessories C CC11 717 CCESSORY I ntroduction & Page Contents Introduction mphenol India is a leading esigner, Manufacturer and Marketer of Interconnection solutions since 1971. mphenol is the

More information

SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION

SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL

More information

Features and Application

Features and Application ML-DTL- Features and Application MS2426*/AE66* Features and Application ML-DTL- family offers connectors with bayonet coupling as well as threaded coupling. These connectors are intermateable with correspondingly

More information

AC Series. Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d. cinch.com

AC Series. Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d. cinch.com AC Series Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d cinch.com PRODUCT INDEX AC Series Threaded Coupling Connectors MIL-C-5015 Commercial & QPL d Contents Nomenclature Guide 4 Product Data

More information

Micronix Plus GREAT VALUE CONNECT TO THE FUTURE WIDE PRODUCT RANGE HIGH QUALITY. CONNECTORS SWITCHES HEATSINKS CABLE GLANDS

Micronix Plus GREAT VALUE CONNECT TO THE FUTURE WIDE PRODUCT RANGE HIGH QUALITY.   CONNECTORS SWITCHES HEATSINKS CABLE GLANDS Micronix Plus WIDE PRODUCT RNGE CONNECTORS GRET VLUE SWITCHES HIGH QULITY HETSINKS CBLE GLNDS CONNECT TO THE FUTURE Micronix Plus Micronix Plus SRL, a Romanian private company founded in 1995, has developed

More information

Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003

Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003 Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature

More information