P and P Receptacle PCB Hole Patterns
|
|
- Eileen Blake
- 5 years ago
- Views:
Transcription
1 Series P and P P and P This section contains printed circuit board footprints for vertical mounted Series 79 receptacles. The contact identification numbers are shown for the connector mounting side of the PC board. Contact tails are gold over nickel plated. PC Tail Diameter Contact Ø Diameter Size In. mm. # # # A (4.35).2825 (7.8) CONTACT 5x) B-2P2.75 (4.45).75 (8.6).270 (6.86) B-9.75 (8.6).2075 (5.27) CONTACT 9x) C (2.97).2075 (5.27) CONTACT 3x) 20 Glenair, Inc. U.S. CAGE Code GLENAIR, INC. 2 AIR WAY GLENDALE, CA AX
2 P and P Series 79 D (24.5) CONTACT 5x) D-3P3.965 (24.5).3075 (7.8).75 (4.45) 2x A3 CONTACT 3x) D-7P (7.05) CONTACT 2X).4075 (0.35).965 (24.5).40 (0.4) CONTACT 5x) E-P2.278 (7.06) CONTACT 2X).445 (.30) 5.5 (28.32) (0.95).559 (4.20) 4 CONTACT 9x) E-9.5 (28.32) CONTACT 9x) 20 Glenair, Inc. U.S. CAGE Code Rev GLENAIR, INC. 2 AIR WAY GLENDALE, CA AX
3 Series P and P E-7P (4.6).75 (4.45) 2x 3.5 (28.32) A3.225 (3.).595 (5.) 4 2 CONTACT 3x) CONTACT 4x) -5P (7.30).265 (32.3).445 (.30) (7.88) CONTACT 3x) (32.3) CONTACT 23x) -5P (7.8).265 (32.3) A3 A4 A5.75 (4.45) 4x.25 (30.86).95 (4.95) CONTACT 33x) G (3.30) 20 Glenair, Inc. U.S. CAGE Code GLENAIR, INC. 2 AIR WAY GLENDALE, CA AX
4 P and P Series 79 H-0P4.800 (45.72).428 (0.87) CONTACT 6x) 2 A3 A (5.99).472 (.99) (23.98) CONTACT 4x) H-29P (7.30).050 (.27) 4.75 (4.45) (45.72) (0.56) MAX DIA CONTACT 22x) (.09).00 (2.54).057 (.45) A3 A4 A5 A6 A7.375 (9.53).75 (4.45) 6x.00 (2.54) CONTACT 7x) H-36P2.800 (45.72).428 (0.87) CONTACT 34x) (4.38).944 (23.98) H-54P2.320 (8.3).0925 (2.35).800 (45.72) CONTACT 52x) (29.46).800 (45.72).428 (0.87) H-5P5 A3 A4 A5.236 (5.99) 4x.944 (23.98) CONTACT 5x) 20 Glenair, Inc. U.S. CAGE Code GLENAIR, INC. 2 AIR WAY GLENDALE, CA AX
5 Series P and P H (7.62).800 (45.72) CONTACT 66x) (4.38) J-7P4 CONTACT 4x).65 (4.02).50 (3.8) 7 6 A3 A (4.45).00 (27.94) CONTACT 3x).65 (4.02) J-25P2.395 (0.03) CONTACT 23x).00 (27.94).65 (4.02) J (5.27) CONTACT 33x).65 (4.02).2825 (7.8) J-7P7 A3 A4 A5 A6 A7.75 (4.45) 6x K-27P4.595 (5.).4325 (0.99) 2.05 (5.8) (29.2).500 (38.) CONTACT 23x) A3 A4 CONTACT 4x) 20 Glenair, Inc. U.S. CAGE Code GLENAIR, INC. 2 AIR WAY GLENDALE, CA AX
6 P and P Series 79 K-35P (0.35) 2.05 (5.8) CONTACT 33x) (38.) K (5.8) CONTACT 43x) K-9P (7.8) 2.05 (5.8) A3 A4 A5 A6 A7 CONTACT 9x) A8 A9.75 (4.45) (5.7).428 (0.87) L-6P6.236 (5.99) 5x A3 A4 A5 A6 CONTACT 6x).3055 (7.76) L (.97) (5.7) (.83) #23 CONTACT 78x) M (8.89).038 (.97) (55.88) (.83) #23 CONTACT 02x). 20 Glenair, Inc. U.S. CAGE Code GLENAIR, INC. 2 AIR WAY GLENDALE, CA AX
PCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
More informationSeries IPT (26482 Type) Bayonet Coupler
IPT330 eedthrough with Jack-to-Jack RJ45 Sample Part Number IPT330 02PP G 18 5E 1 7 RJ45 Category 2 IPT330 Material/inish 02PP = ront Panel Mount Square lange receptacle G = Insert grounded to shell; Omit
More informationSeries 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
More informationSeries 801 Hermetic Receptacles feature 304L stainless steel shells, fused vitreous glass insulators and Alloy 52 iron alloy contacts.
801-012 Series 801 Hermetic Receptacle Double-Start AM Threads How to Order Information Series 801 Hermetic Receptacles feature 304L stainless steel shells, fused vitreous glass insulators and Alloy 52
More informationMicro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More informationTopside / Shipboard Environmental Connectors
eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its-mb reverse-bayonet mil-c-5015 type / VG95234 EQUIVAEN arine Bronze eries I-B connectors are compliant with VG95234, using
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationSection L MIL-DTL Micro-D Connectors
Section MI-DT-353 Micro-D Connectors Micro-D MI-DT-353 product selection guide Glenair s Complete Micro-D Product ine includes all M353 Micro-D connectors. Choose Solder Cup, Pre-Wired or PCB versions.
More informationS Straight PCB Panel Mount Plugs
Sample Part umber K-43 M E P B Part umber PCB Panel Mount Plugs socket contacts with STRAIGHT PCB TERMIATIO Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for thru-hole
More informationFR ITS RJ45-1 W PHM F6
CODE SCALE SERIES SHEET WEIGHT CODE SCALE SERIES DESCRIPTION SHEET.2x45 R.2 Max. Max. specific indicationweight DATE File:RECEPTACLE_FEMM--PCB_3 - Copia DESCRIPTION.2x45 R.2 Max. Max. DATE File:RECEPTACLE_FEMM--PCB_3
More informationWEIGHT / COST-SAVING Dummy Contact Sealing Plugs (DCSP) For reliable sealing of unused contact cavities without the use of electrical contacts
Sealing Plugs (DCSP) For reliable sealing of unused contact cavities without the use of electrical contacts The use of color-coded M27488 type plastic sealing plugs in unused contact cavities is a requirement
More informationMicro-D Printed Circuit Board Connectors
PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the
More information8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55116
Specification Details: Specification: MIL-DTL-55116 Title: Connectors: Miniature Audio, Five Pin and Six Pin Federal Supply Class (FSC): 5935 Conventional: Yes Specification contains quality assurance
More informationP Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
More informationSimulator switch, magnetic operation
Description Single pole, miniaturised aircraft simulator switch with extremely fast magnetic trip time. Blade, screw and wire wrap terminals. Aircraft style threadneck and push/pull button with white trip
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationHyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationDISPOSABLE COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES
B10 CHAPTER FISCHER CORE SERIES DISPO COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES Sterilizable (EtO), gamma) Color-coded for easy integration Single or two-piece shell Lightweight and shock resistant
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More information2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example
Coupling nut Plugshell O-Ring O-Ring Cable clamp 2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example Shell ring Plugshell O-ring: Shell: The Plugshell O-Ring is designed to help to maintain
More informationMicro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationWIRING INSTRUCTIONS FOR IT-FRIT (MIL-DTL-C-5015G) AND ITB-ITS-FRITS (VG95234) CONNECTORS
WIRING INSTRUCTIONS FOR IT-FRIT (MIL-DTL-C-5015G) AND ITB-ITS-FRITS (VG95234) CONNECTORS JUNE 2016 for IT - FRIT (MIL-C-5015G) and ITB - ITS - FRITS (VG 95234) Connectors The aim of this book is to show
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More informationMS17340 N 12 A 1 FINISH AN EXAMPLE OF THE GOVERNMENT DESIGNATION WHICH IDENTIFIES THE COVER OR RECEPTACLE IS SHOWN B MS17343 C 20 FINISH SIZE -1-
QUALIFICATIONS VALIDATED EVERY 24 MONTHS 19-Jul-99 SUPERSEDING QPL-22992-40 31-Mar-98 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATI MIL-C-22992 CONNECTOR, PLUGS AND RECEPTACLES,
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationBand Tool Kits M81306/1-01 and M81306/1-02 Operating Instructions
Band Tool Kits M81306/1-01 and M81306/1-02 1 M81306/1 Standard and Micro Tool Overview 4 3 1 6 2 7 5 1 Calibration Access Plug (See Note 3) 2 Tensioning Lever: Squeeze with short gentle strokes to tighten
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail
More informationAE40 CATALOG D38999 CYLINDRICAL CONNECTORS FOR PCB APPLICATIONS
AE40 CATALOG D38999 CYLINDRICAL CONNECTORS FOR PCB APPLICATIONS 9452 De Soto Avenue I Chatsworth, CA 91313-2231 I Voice: 818.407.5400 I Toll Free: 800.458.4412 I Fax: 818.407.5460 I email: sales@airelectro.com
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationShell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
More informationMIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationBAND-IT Tie-Dex II Banding Tools Operating Instructions
BAND-IT Tie-Dex II Banding Tools 600-058 600-061 1 Band-It Standard, Micro and Nano Overview 1 Calibration Access Plug 2 Tensioning Lever: Squeeze with short gentle strokes to tighten band to the proper
More informationMD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
More informationRA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
More information- - Introduction. Specifications
14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ
More informationSEALED POWER TRANFORMERS BV SERIES EI30 0.6VA 2.8VA FEATURES OUTLINE DIMENSIONS
ZETTLER Magnetics, Inc. COLUMBIA ALISO VIEJO, CA 266 4-360-838 FAX 4-360-83 WEB SITE: HTTP://WWW.ZETTLERMAGNETICS.COM E-MAIL: SALES@ZETTLERMAGNETICS.COM FEATURES UL & VDE CERTIFICATION SMALL PHYSICAL FOOTPRINT
More informationModular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
More informationBand-Master ATS Banding Tools and Operating Instructions
Band-Master ATS Banding Tools 601-100 and 601-101 Step 1 Prepare Cable Braid for termination process NOTE: banding must occur on an unfixtured cable assembly. Attaching a band to a firmly clamped cable
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More informationHBE 24 SCREW & CRIMP TERMINATED INSERTS
1 HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Panel Cut-Out Contacts Sold Separately These inserts fit in the HBE 24 Series Housings which are on the
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationNFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013
NF F 61030 Qualified C onn ec to r s ith series Easy-to-AssemblY, Power and Signal Reliable Reverse Bayonet Coupling June 2013 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationSUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION
RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationInterconnection Solution Guide. Durability Gold Flash 75 cycles 15µ Gold 125 cycles 30µ Gold 250 cycles Full gold flash 75 cycles
D Amphenol G17 DSub Connector Right Angle PCB Mount Through-hole DSub connectors male and female. Board-locks P/B DSub R/A PCB CONNECTOR Through Hole 2.54mm pitch PC board layout Page D-3 DSub Accessories
More informationPHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
More informationAmphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
More informationMINIATURE MIL-DTL TYPE AUDIO FREQUENCY CONNECTORS
SERIES 151 MINIATURE MIL-DTL-55116 TYPE AUDIO FREQUENCY CONNECTORS FEBRUARY 2012 SERIES 151 MINIATURE MIL-DTL-55116 TYPE AUDIO FREQUENCY CONNECTORS HIGH RELIABILITY PERFORMANCE FOR MISSION-CRITICAL COMMUNICATION
More informationANDON INTERCONNECTION SPECIALISTS
INTERCONNECT SPECIALISTS MERCURY UNITED ELECTRONICS, INC MERCURY INC Andon Part Number Replace "XXX" with Terminal Type Terminal Type Surface Thru-Hole Mount Model Number U1 C075-03-03-01-XXX-R27-L14 400T4
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationSeries 47B: Sealed Miniature Rocker and Paddle Switches
Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More informationCDU. Model CDU Contents. EBARA Stainless Steel Centrifugal Pumps
odel Contents Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions 7/-3/HP 7/3- /HP 7/-HP /-HP /3- /HP 3 3 /-3HP /- /HP /3-3HP /-3HP *Note: NSF/ANSI Annex G listed Certified
More informationMIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors
MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,
More informationKA Series. MIL-DTL Compliant PCB connectors
MIL-DTL-55302 Compliant connectors Hypertac Hyperboloid Technology Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac (HYPERboloid
More informationAmphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
More informationMIL-DTL Micro-D. MD Series CONNECTING YOUR ENGINEERING PASSION MILITARY STYLE CONNECTORS
CONNECTING YOUR ENGINEERING PASSION Series MIL-DTL-353 Micro-D MILITARY STYLE CONNECTORS MILITARY & DEFENSE EDITION Lightweight, High-Density Connectors Pre-Assembled Wire Harnesses PCB Angled & Straight
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More information60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
More informationInsulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
More information1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
More information8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies
8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07
More informationDEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5
DEUTSCH HDJ Series connectors are subminiature environment-class connectors with high and medium-density insert arrangements. They are based on MIL-DTL-38999 Series I coupling interface lengths and Series
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationHEAVY DUTY CONNECTORS FOR INDUSTRIAL APPLICATIONS FAST CHECK
HEAVY DUTY CONNECTORS FOR INDUSTRIAL APPLICATIONS FAST CHECK MULTIPOLE INDUSTRIAL CONNECTORS AND ALUMINIUM ENCLOSURES FOR INDUSTRIAL APPLICATIONS Molex offers a wide range of Heavy Duty Connectors: inserts,
More informationHeavy Duty ConnectorS. Fast Check
Heavy Duty ConnectorS FOR INDUSTRIAL APPLICATIONS Fast Check multipole industrial connectors and Aluminium Enclosures for industrial applications Molex offers a wide range of Heavy Duty Connectors: inserts,
More informationMiniature microswitches - Positive break
1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very
More informationILLUSTRATED PARTS LIST
Anoka, MN. 0- Telephone -00--00 Facsimile -00--0 FCB POST-MIX DISPENSER WITH HOT-GAS DEFROST AND V ELECTRONICS (DEFROST/ERROR INDICATOR LIGHTS) UNIT PART NO. 0000 000 THIS DOCUMENT CONTAINS IMPORTANT INFORMATION
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More informationMCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationT E C H N I C A L O V E R V I E W LEMO S REMOTE HANDLING CONNECTORS N SERIES
T E C H N I C A L O V E R V I E W LEMO S REMOTE HANDLING CONNECTORS N SERIES I NTRODUCTION LEMO s N Series connectors are ideally suited for remote handling in nuclear environments. Main Features Push-pull
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationRTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
More informationLOCKING DEVICES. Features and Benefits: Durable and cost efficient Ease-of-use for do-it-yourself installation All locking devices are UL Listed K3-K5
LOCING DEVICES ENERLITES Industrial Grade Locking Devices are built to provide unparalleled quality and superb performance in the most demanding environments. The ENERLITES line includes a comprehensive
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL
More information1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
More information60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More informationfor Quadrax and ELIO 8
1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467
More informationBDF-1000 Barn Door Hardware BDF-Series 1000
BARN DOOR HARDWARE BDF-1000 Barn Door Hardware BDF-Series 1000 Type: Top Mount Single Wheel Material: Metal Construction Finish: Matte Black (powder-coated), Satin Nickel Designed for Wood Doors: 1-3/8
More informationBENEFITS 782 STANDARD PART NUMBERS FEATURES 782 XDX M4L- 120A ORDERING CODE DPDT 10 AMP & 4PDT 3 & 5 AMP MINIATURE POWER RELAY FLAG INDICATOR:
SERIES 782XBX/XDX DPDT 10 AMP & 4PDT 3 & 5 AMP MINIATURE POWER RELAY FEATURES FLAG INDICATOR: L.E.D. STATUS LAMP: PUSH BUTTON: LOCK-DOWN DOOR: FINGER-GRIP COVER: I.D. TAG/WRITE LABEL: COVER ADAPTERS: BENEFITS
More information