MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
|
|
- Victoria Diana Lynch
- 6 years ago
- Views:
Transcription
1 Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) Braided wires soldered to the metal shell MD connector(with ground clip) Frequency(MHz) The shielding effect differs depending on the wire specifications. The extremely compact MD miniature circular connector has an outside diameter roughly half that of conventional circular DIN connectors. The connector's contact exclusively designed by JST dramatically reduces assembly time while improving contact reliability. The MD connector's shielding is superb. All you need to do is crimp the connector ground clip over the cable's braided shielding wire. Simple and reliable, JST's MD connector is well suited for the production of high-density office automation equipments as well as audio and video products. * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details.
2 PLUG Straight type plug Side entry type plug Contact JST's exclusive one-piece contact is formed and cold worked by stamping presses to ensure the highest reliability. Contact Housing B Metal Shell Three shell types (standard, A and B) are available. Metal Shell One piece including ground clip Housing A Housing A is designed to keep the contacts firmly in place while protecting them from damage. Ground clip If used, the ground clip is crimped to cover the cable braid. Housing A Housing B Solder tail Assembled product Molded product Assembled product Molded product Features Specifications Crimp contact with integral construction for improved reliability JST's exclusive one-piece construction of the pin and crimping section not only enhances the connection's reliability but also substantially improves productivity and efficiency by eliminating the need for soldering. Little force is required to insert the contact into the housing. Even a wire as thin as AWG #0 can be inserted easily by hand. Easy assembly without using special tools Other than crimping tools, no special tools are required to assemble the connector. Simply install the contacts, housing, ground clip and metal shell in that order. This makes it possible to greatly increase assembly efficiency, resulting in significant reductions in total cost. Simple braid-to-connector assembly and effective EMI protection Because the ground clip is crimped to the cable braid, no soldering is required. While securely holding the cable, the ground clip also ensures the integrity of the grounded circuit. This is a critical factor in reducing noise. The shielding effect of this method is approximately 0dB greater than that obtained by the conventional method of bundling and soldering cable braid to the metal shell. Materials Part name Contact Housing A, B Metal shell Ground clip Characteristics Current rating Voltage rating Temperature range Contact resistance Insulation resistance Withstanding voltage Applicable wire Material and Finish Phosphor bronze, nickel-undercoated Mating section: gold-plated Crimping section: tin-plated Phosphor bronze, copper-undercoated, tin/lead-plated Phosphor bronze, nickel-undercoated silver-plated PBT, UL9V-0, black Mild steel, nickel-plated Brass, nickel-plated.0a, AC, DC (using AWG #) 0V, AC, DC - C to + C (including temperature rise in applying electrical current) Initial value: 00mΩ max. After environmental testing: 00mΩ max. 0MΩ min. 00V AC/minute AWG #0 to #
3 Plug contact Model number identification Series name MD - S P 0 Product from: S... Chain, B... Loose piece Type of contact: P... Plug contact Applicable wire:... AWG # to #... AWG #0 to # Material:... Phosphor bronze Finish 0... (flash) micron(0 micro-inch) gold-plated.... micron( micro-inch) gold-plated *Contact JST for details..0(.).9(.).. (.0) (.0) 0. (.0) dia. (flash) MD-SP0 MD-SP0 MD-SP0 MD-SP0 MD-SP90 MD-SP90 Applicable wire mm AWG # Insulation O.D. mm(in.) 0.0 to 0. 0 to 0. to.(.0 to.0) 0. to 0. to.0 to.(.09 to.0) reel 0,000 0,000 9
4 Housing Housing A (With to circuits). (.) dia..(.09).(.09).0(.09).0(.09).(.) (With 9 circuits) 9. (.0) dia..(.).(.).0(.09).0(.09) 0.9(.0).(.0).(.).0(.09) 0.(.0).0(.09).0(.09).0(.09) 0.(.0).(.0).0(.09) 0.(.0).(.0).(.0) 0.(.0).0(.09).(.0) Housing B (With circuits) (With circuits) (With circuits). (.) dia..(.09).(.09).(.0).(.).0(.09). (.) dia..(.09).(.09).0(.09).(.).0(.09). (.) dia..(.09).(.09).0(.09).0(.09).(.).0(.09).0(.09) JST.0(.09).0(.09).(.0) 0.(.0).0(.09) JST.0(.09).0(.09) 0.(.0).0(.09).0(.09) JST.0(.09).0(.09) 0.(.0).0(.09) (With circuits).(.) dia..(.09).(.09).0(.09).0(.09).0(.09) (With 9 circuits) 9.(.0) dia..(.).(.).0(.09).0(.09) 0.9(.0).(.0).0(.09).0(.09) JST 0.(.0).0(.09).0(.09).0(.09) 0.(.0).0(.09) JST 0.(.0).(.0).(.0).0(.09) 0.(.0) Combined housings A and B Housing A is used with housing B. Housing B must have the same number of orifices as there will be contacts in the connector. However, housing A can have a greater number of cavities (but never less). Thus in applications in which a user may require MD connectors with different pin counts, only one kind of "A" housing needs to be inventoried - the one with the highest pin count. For more details regarding such combinations, contact JST. 0 Housing B Housing A Housing A MD-PIA MD-PIA MD-PIA 9 MD-PI9A Note: MD-PIB is not CSA certified. Housing B MD-PIB MD-PIB MD-PIB MD-PIB MD-PI9B,000,000,000,000,000
5 Metal shell (straight type) Standard type (With to circuits) (With 9 circuits) 00.0(.9).(.0).(.) 00.0(.9).(.0).(.) 9.0(.) dia. Solder tail 9.9(.9) dia. Solder tail Type A (features polarizing keys, usable with S-VHS connector) Type B (features polarizing keys, usable with having circuits) 00.0(.9).(.0).(.) 00.0(.9).(.0).(.) 9.0(.) dia. Solder tail 9.0(.) dia. Solder tail Standard Type A (features three polarizing keys) Type B (features polarizing keys... circuits only)) With solder tail Without solder tail With solder tail Without solder tail With solder tail Without solder tail to 9 MD-PST MD-PS9T *MD-PST *MD-PS9T *MD-PSAT *MD-PSAT *MD-PSBT *MD-PSBT *Marked products are not CSA certified. 0 0 Ground clip 9.(.0).0(.9).(.0) Applicable cable O.D. mm(in.) to 9 MD-PCCT-S MD-PCCT-S MD-PCC9T-S.(.0) to.(.0).(.9) to.(.).(.) to.(.9) reel,000,000,000
6 Metal shell (side entry type) Standard type 9.(.).0(.) (.) dia. Type A (features polarizing keys, usable with S-VHS connector) Type B (features polarizing keys, usable with housing having circuits) 9.(.).0(.) 00 9.(.).0(.) (.) dia (.) dia. L Wiring direction R Type Standard A B to to Model number R L MD-PSSR MD-PSSL MD-PSASR MD-PSBSR Plug Receptacle Viewing from the mounting side Applicator for the semi-automatic press AP-KN Contact Crimp applicator MKS-L Compact crimp applicator MKS-LS-RG Strip-crimp applicator MKS-SC with safety cover without safety cover with safety cover without safety cover with safety cover MD-PCCT-S APLMK MD-PCCT-S APLNC MD-PCCT-S MD-PCCT-S APLMK MD-PCCT-S APLNC MD-PCCT-S MD-PCC9T-S APLMK MD-PCC9T-S APLNC MD-PCC9T-S MD-PSSL APLMKLS MD-PSSR APLLSNC MD-PSSR MD-PSASR APLMKLS MD-PSSR APLLSNC MD-PSSR MD-PSBSR APLMKLS MD-PSSR APLLSNC MD-PSSR MD-PSSR APLMKLS MD-PSSR APLLSNC MD-PSSR MD-SP** APLMK MD-SP APLNC MD-SP APLSC MD-SP MD-SP** APLMK MD-SP APLNC MD-SP APLSC MD-SP
7 RECEPTACLE (through-hole type) Shielding tube Holder A spring lock temporarily secures the to the printed circuit board. Shielding cover Housing Features Split round contact provides maximum contact area and contact redundancy The contact is split to insure redundant connection and is cylindrically shaped to provide maximum contact mating area. The result is a highly reliable connection to the mating pin. This superb contact performance is maintained even after many mating and unmating cycles. Flange construction The flange construction allows the to be secured on the equipment chassis with screws, ensuring more reliable electrical connection. Contact The is a split round contact that at once provides maximum contact area and contact redundancy. Standard type with flange shielding cover (Standard type/type B) Compact, high-density design This has a low profile with a mounting height of just.mm (.0") and width of.0mm (."). It takes up little space on the printed circuit board, allowing high-density product design. Spring locks make it easy to temporarily secure s to printed circuit boards for soldering The shielding tubes are equipped with spring locks which can be used to temporarily secure the s to printed circuit boards. This prevents the s from moving and ensures reliable soldering. (Front shielding type) Front shielding construction A metal shielding cover integrating the connection part which connects to the plug's shell is used. Because there is no gap between the and the plug, this construction prevents the entry of space conductive noise. Effective shielding With the front shielding construction and the flange construction, the shielding effect is improved by about db over the conventional models. Standard type without shielding cover (left) Standard type with shielding cover (center) Type B (applicable to Type B plug) (right) Front shielding type Specifications Materials Model number identification Part name Material and Finish Contact Housing / Holder Characteristics Current rating Voltage rating Temperature range Contact resistance Withstanding voltage Applicable PC board thickness [Standard type/ Type B] Shielding tube Shielding cover Phosphor bronze, nickel-undercoated Mating section: gold-plated Solder tail: tin/lead-plated Phosphor bronze, nickel-undercoated silver-plated Phosphor bronze, copper-undercoated, tin-plated PBT, UL9V-0.0A, AC, DC 0V, AC, DC - C to + C (including temperature rise in applying electrical current) Initial value: 00mΩ max. After environmental testing: 00mΩ max. 00V AC/minute.mm(.0") Brass, nickel-plated (*note) Brass, copper-undercoatd, tin-plated Series name Product name: S... Receptacle :,,,,, 9 MD - S 0 00 B - 0 Shielding cover: 0... Without shielding cover... With shielding cover... With front shielding cover Flange: Without flange 0... With flange 0... With top flange with nuts Type B indication B... Type B (Applicable to Type B plug) Blank...Standard type (Applicable to Standard and Type A plugs)...front shielding type (Applicable to Standard and Type plugs) Finish 0... (flash)... 0.micron(micro-inch) gold-plated... 0.micron(0micro-inch) gold-plated [Front shielding Type] Shielding cover Brass, nickel-plated (*note) Note: Use soldering flux that is suitable for nickel-plating. Tin plated version is also available. Note: Contact JST for special plating requirements.
8 Standard type/ Type B.0(.).(.).(.0).0(.).(.)..(.0) (.) 9.(.).(.09).(.9) 0. (.0).(.09).0(.) [.0(.09)].(.0) M.(.).(.) Without shielding cover With shielding cover [.(.)]. (.).(.) With flange shielding cover [.(.)]. (.).(.) Without shielding cover.(.09). (.).(.).(.09) With shielding cover. (.).(.).(.09) With flange shielding cover Standard type: Without shielding cover 9 9 (flash) MD-S000-0 MD-S000-0 MD-S000-0 MD-S000-0 MD-S000-0 MD-S (flash) MD-S00-0 MD-S00-0 MD-S00-0 MD-S00-0 MD-S00-0 MD-S900-0 MD-S000-0 MD-S000-0 MD-S000-0 MD-S000-0 MD-S000-0 MD-S Standard type: With shielding cover MD-S00-0 MD-S00-0 MD-S00-0 MD-S00-0 MD-S00-0 MD-S900-0 MD-S MD-S MD-S MD-S MD-S MD-S MD-S00-90 MD-S00-90 MD-S00-90 MD-S00-90 MD-S00-90 MD-S Standard type: With flange shielding cover (flash) MD-S0-0 MD-S0-0 MD-S0-0 MD-S0-0 MD-S0-0 (flash) (flash) MD-S0-0 MD-S0-0 MD-S0-0 MD-S0-0 MD-S0-0 Type B: Without shielding cover MD-S0-90 MD-S0-90 MD-S0-90 MD-S0-90 MD-S0-90 MD-S000B-0 MD-S000B-0 MD-S000B-90 Type B: With shielding cover MD-S00B-0 MD-S00B-0 MD-S00B-90 Front shielding type M..0(.).0(.).(.9).0(.) Type B: With flange shielding cover (flash) MD-S0B-0 MD-S0B-0 MD-S0B-90.9(.).(.0).(.) 9.(.) Front shielding type (flash).(.0) MD-S0-0 MD-S0-0 MD-S0-90.(.).(.).(.).(.).(.09) MD-S0-0 MD-S0-0 MD-S0-0 MD-S0-0 MD-S0-90 MD-S0-90 MD-S0-0 MD-S0-0 MD-S0-90
9 PC board layout Layout Mating section layout Standard and Type B PC board layout (viewed from component side) Front shielding type Note. ± 0.0(.0 ±.00). ± 0.(. ±.00). ± 0. (.09 ±.00) 0. ± 0.(.0 ±.00). ± 0.(. ±.00) +0. ( )dia. 0. ± 0. (.0 ±.00). ± 0.0 (.09 ±.00). ± 0.(.0 ±.00).0 ± 0.0(. ±.00).(.)max.. ± 0.(. ±.00). ± 0.(. ±.00) Hole dimensions (from the front). ± 0. (.0 ±.00)dia (.0 0 )dia..0 ± 0.0 (. ±.00). ± 0.0 (.09 ±.00).(.)max. Note: The two holes are necessary when installing a shielding cover. Note. ± 0.0(.0 ±.00). ± 0.(. ±.00). ± 0.0(.0 ±.00). ± 0. (.09 ±.00) 0. ± 0.(.0 ±.00). ± 0.(. ±.00) (.0 0 )dia. 0. ± 0. (.0 ±.00). ± 0.(.0 ±.00).0 ± 0.0(. ±.00). ± 0.0.(.)max. (.09 ±.00). ± 0.(. ±.00). ± 0.(. ±.00) Hole dimensions (from the front). ± 0.0(.0 ±.00). ± 0. (.0 ±.00)dia (.0 0 )dia..0 ± 0.0 (. ±.00). ± 0.0 (.09 ±.00).(.)max. Note: The two holes are necessary when installing a shielding cover. Note. ± 0.0(.0 ±.00). ± 0.(. ±.00). ± 0.0(.0 ±.00). ± 0. (.09 ±.00) 0. ± 0.(.0 ±.00). ± 0.(. ±.00) (.0 )dia ± 0. (.0 ±.00). ± 0.0 (.09 ±.00). ± 0.(.0 ±.00).0 ± 0.0(. ±.00).(.)max.. ± 0.(. ±.00). ± 0.(. ±.00) Hole dimensions (from the front). ± 0.0(.0 ±.00). ± 0. (.0 ±.00)dia (.0 0 )dia..0 ± 0.0 (. ±.00). ± 0.0 (.09 ±.00).(.)max. Note: The two holes are necessary when installing a shielding cover.
10 PC board layout Layout Mating section layout Standard and Type B PC board layout (viewed from component side) Front shielding type Note. ± 0.(. ±.00). ± 0.0(.0 ±.00) 0.9 ± 0.0(.0 ±.00). ± 0.0(.0 ±.00). ± 0. (.09 ±.00) 0. ± 0.(.0 ±.00). ± 0.(. ±.00) (.0 0 )dia. 0. ± 0. (.0 ±.00). ± 0.0 (.09 ±.00). ± 0.(.0 ±.00).0 ± 0.0(. ±.00).(.)max. Note: The two holes are necessary when installing a shielding cover. (Type B) Note. ± 0.(. ±.00). ± 0.0(.0 ±.00) 0.9 ± 0.0(.0 ±.00). ± 0.0(.0 ±.00). ± 0. (.09 ±.00) 0. ± 0.(.0 ±.00). ± 0.(. ±.00) 0.9±0. (.0±.00)dia. 0. ± 0. (.0 ±.00). ± 0.0 (.09 ±.00). ± 0.(.0 ±.00).0 ± 0.0(. ±.00).(.)max.. ± 0.(. ±.00) 0.9 ± 0.0(.0 ±.00). ± 0.(. ±.00) Hole dimensions (from the front). ± 0.0(.0 ±.00). ± 0. (.0 ±.00)dia (.0 0 )dia..0 ± 0.0 (. ±.00). ± 0.0 (.09 ±.00).(.)max. Note: The two holes are necessary when installing a shielding cover.
11 PC board layout Layout Mating section layout Standard and Type B PC board layout (viewed from component side) Front shielding type 9 9 Note.0 ± 0.(. ±.00).0 ± 0.(. ±.00).0 ± 0.0(.09 ±.00) 9 0. ± 0.0(.0 ±.00). ± 0.0(.0 ±.00). ± 0. (.09 ±.00). ± 0.0(.0 ±.00) 0. ± 0.(.0 ±.00). ± 0.(. ±.00) (.0 0 )dia. 0. ± 0. (.0 ±.00). ± 0.0 (.09 ±.00).(.)max..0 ± 0.0(. ±.00). ± 0.(.0 ±.00) Note: The two holes are necessary when installing a shielding cover. Note:. Tolerances are non-cumulative: ±0.0mm(±.00" ) for all centers.. Hole dimensions differ depending on the kind of PC board and piercing method. The dimensions above should serve as a guideline. For details, contact JST.. The layout drawing is viewed from the mounting side.. When using a with shielding cover or with flange shielding cover, the pattern should be designed to connect the shielding cover and the shielding tube, if necessary. (No need for the front shielding cover.)
12 Assembly layout Receptacle Plug Straight type Side entry type Standard type Type B With shielding cover.(.0).0(.) 0.0(.).(.).(.0).0(.).0(.9).(.).(.).(.0) 0.0(.).(.).(.0).0(.9) Standard type Type B With flange shielding cover.(.0).(.0).(.).(.).(.9) 0.0(.).(.).(.9).0(.9) Front shielding type 9.(.) 9.(.).(.).(.)
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
More informationUB CONNECTOR. 1Certified LR USB (Universal Serial Bus) Conforming Connector. Features. Specifications. Standards
USB (Universal Serial Bus) Conforming Connector Features Conforms to USB (Universal Serial Bus) standards This connector conforms to the USB standards, that stipulate the serial interface between PC's
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
More informationEH CONNECTOR. 1Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationEH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationVL CONNECTOR. 1 Certified LR R Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 6.
Crimp.mm (.") pitch Disconnectable Crimp style Wire-to-wire connectors Features Housing lances for contact retention Since the contact retention lances are part of the housing rather than protruding from
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
More informationRA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
More informationHCMCONNECTOR HCM. Board-to-wire/Wire-to-wire. Features. Specifications
Board-to-wire/Wire-to-wire HCM.64 non-waterproof low profile type connector for automobile corresponding to the miniaturization of the automotive electrical equipment. Comply with the performance specification
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
More informationJ&JK SERIES SUBMINIATURE. DCONNECTOR EMI prevention shielding cover ( J cover) J COVER. Cover nut. Cover. Dimensions mm(in.) W.
ccessories DCONNECTOR EMI prevention shielding cover ( J cover) SUMINITURE J&JK SERIES J COVER J cover nut Features This shielding cover is made of mild steel, formed by our advanced stamping technology,
More informationHigh Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
More informationFAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationRWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationPH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. 2.0mm
Crimp.mm (.") pitch PH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features This is a thin, lowprofile.mm (.") pitch connector.mm (.") in height after mounting and.mm (.1") in width. It
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationCF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationDISPOSABLE COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES
B10 CHAPTER FISCHER CORE SERIES DISPO COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES Sterilizable (EtO), gamma) Color-coded for easy integration Single or two-piece shell Lightweight and shock resistant
More informationAmphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationAdam Technologies, Inc.
INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016
More informationStandard Buccaneer IP68 BUCCANEER FOR POWER BUCCANEER POWER
IP68 Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding Contact Insert Sealing Cap Clip
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationCastellated/Hex Nut. Insert Retaining Ring. Contact Insert
Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Contact Insert Sealing Cap Clip Gland Cage Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationOur Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
More informationAMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
More informationFuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationSpecifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0.
05 rimp Type onnectors For Mating To Mate With ss y Pitch onnectors Wire to oard onnectors connectors are miniature type connectors which were developed with concepts for versatile usage for P.. board
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More information1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
More informationLow Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationFuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationCYLER. Catalogue. Cyler Technology Limited cylerconnectors. Push-Pull connectors
Push-Pull connectors Catalogue cylerconnectors Selection Guide Where and Why Push-Pull? Industrial and Automation Medical electronics Telecommunication Test and Measurement Quality aesthetics for more
More information151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More information2M Series Contacts and Tools
Crimp Type AMPS #23 #20HD #20 #16 #12 AWG Part Number Color Band 1st 2nd 3rd #22-#28 2M809-001 N/A N/A N/A #26-#30 2M809-042* Blue N/A N/A 5 Socket #22-#28 2M809-002 N/A N/A N/A Socket #26-#30 2M809-043*
More informationAmphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationAMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications.
AMPHENOL PCD SHENZHEN ASGTC Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications 1 www.amphenolpcd.com.cn CONTENT CONTENT ASGTC Series Connector structure.........
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationPHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
More informationCard Edge Connectors Catalog Issued 7-03
Catalog 1654080 Issued 7-03 Introduction This catalog contains product descriptions of MP Card Edge Connectors. These connectors are presented in three groups: Solder Type Board-to- Board, Press-fit Board-to-
More informationM8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
More informationIC Sockets. OMRON s IC Connectors Have Excellent Reliability and Can Tolerate Momentary Interruptions in Power. Ideal for Highspeed Data Processing.
IC Sockets XR2 OMRON s IC Connectors Have Excellent Reliability and Can Tolerate Momentary Interruptions in Power. Ideal for Highspeed Data Processing. Round pins and 4-point (4-finger) contact construction
More information125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
More informationEthernet Buccaneer IP68 BUCCANEER FOR DATA BUCCANEER DATA
IP68 Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains IP68 seal to panel
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationEthernet Buccaneer BUCCANEER DATA. bulgin
BUCCANEER FOR DATA bulgin Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains
More informationR I A C O N Terminal Block. Technical Data (according to UL/CSA) Voltage: M a x i mum current: Recommended tightening torque: Wire strip length:
3.5mm High Density Pluggable High density, low profile connector provides reliable electrical and mechanical connection.integral coding feature prevents loss of a circuit.screws are captive in the molding.
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationI/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
More informationORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
More informationInterconnection Solution Guide. Durability Gold Flash 75 cycles 15µ Gold 125 cycles 30µ Gold 250 cycles Full gold flash 75 cycles
D Amphenol G17 DSub Connector Right Angle PCB Mount Through-hole DSub connectors male and female. Board-locks P/B DSub R/A PCB CONNECTOR Through Hole 2.54mm pitch PC board layout Page D-3 DSub Accessories
More informationPRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
More informationabout us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More information9316 series Underwater applications Explosion proof Hermetically sealed
Branche Connecteurs Offshore 9316 series Underwater applications Explosion proof Hermetically sealed Summary 9316 1 Introduction 2 Presentation 3 Technical characteristics 4 Synopsis 5 Part-numbering system
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationBATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
More informationVAL-U-LOK* Series Headers, Connectors, and TPA Accessories
VAL-U-LOK* Series Headers, Connectors, and TPA Accessories Application Specification 114-13172 30 NOV 17 Rev W1 NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
More informationSMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
More information9 ORDERING INFORMATION MTJ MTJ SERIES
Introduction: dam Tech MTJ series Modular Jacks are a complete line of PCB and wire leaded jacks which are UL and CS approved and meet all required FCC rules and regulations. dam Tech offers a multitude
More informationtable of contents Switches J 1 SECTION SECTION J Quick Guide to Switches... J2-J3
table of contents Switches Quick Guide to Switches....................................... J2-J3 Push Switches.............................................. J4-J7 Single Pole ON-OFF.......................................
More informationPROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
More informationCoaxial Snap-Lock Connectors
Coaxial Snap-Lock Connectors Application Specification 114-13010 11 APR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
More informationDirectory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
More informationARinc 600 Series. Rack & Panel Rectangular Connector. Brief introduction. Specification. 1. Material and surface treatment. 3. Electric properties
ARinc 600 Series Rack & Panel Rectangular Connector Brief introduction Good performance of environment resistance 216 kinds of anti-misoperation styles High density up to 800 signal contacts Low insertion
More informationHow to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION
hermetically sealed connectors are designed to meet environmental conditions of extreme pressure differential. These connectors are part of the ITT Cannon D Subminiature series and are qualified to MIL-C-24308
More informationMG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7
CONTENTS General Specification........ 3 Shell Styles..... 4, 5, 6 Ordering Information Connectors... 7 Ordering Information Protective Caps... 8 Ordering Information Square Gaskets... 8 Insert Configurations.
More informationD-Sub Connectors. Catalog E /09 Edition 3
www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com Table of Contents General..............................................................................................2
More informationHBE 24 SCREW & CRIMP TERMINATED INSERTS
1 HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Panel Cut-Out Contacts Sold Separately These inserts fit in the HBE 24 Series Housings which are on the
More informationSealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
More informationDTP Series : Contacts (Open Barrel) Type Barrel Type GA Size
Deutsch Connectors DTP Series Deutsch s DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed
More informationSingle 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
More informationTable of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationDT Series Technical Manual
Deutsch Industrial UK Stanier Road St. Leonards On Sea East Sussex TN 9RF England Ph. (0) 7 Fax (0) 979 industrialuk@deutsch.net Deutsch Industrial Europe Fraunhoferstrasse b Martinsried Germany Ph. +9
More informationDirectory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
More informationDT04 08P + W8P
Deutsch Connector Assortment Flip Kit *763354 This assortment contains 574 pieces/sets of widely used Deutsch Connectors. Flip Kits are handy both in the shop and the service vehicle. They are portable,
More information