High Performance Miniature Circular Connectors
|
|
- Barnaby King
- 5 years ago
- Views:
Transcription
1 High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. The plug diameter range from Ømm to Ømm, and satisfies the need for small-size, light-weight and high-density electronic components. Equipped with internal metal parts and a shielding mechanism, the HR (-) and HR feature enhanced protection against EMI. Product Specifications Ratings Items Rated voltage Rated current V AC, 4V DC A Operating temperature range -ç to + Storage temperature range -ç to + Measured at DC ma. Insulation resistance Specifications 3mø max. (excluding the cable conductor resistance) Mø min. 3. Withstanding voltage No flashover or dielectric breakdown. AC 3V for one minute 4. Vibration resistance No electrical discontinuity for µs or greater. to Hz/cycle, amplitude-.7mm, 3 axis directions, hours each. Shock resistance No electrical discontinuity for µs or greater. Acceleration: 49m/s duration-ms, 3 axis directions, 3 cycles each. Mating Cycles 3mø max. of contact resistance (excluding the cable conductor resistance), times 7. Temperature cycle Insulation resistance: a minimum of Mø -ç: 3 minutes Normal temperature: to minutes 7ç: 3 minutes Normal temperature: to minutes, left for cycles. Moisture resistance Insulation resistance: Mø min. (at high humidity) Mø min. (when dry) Temperature: 4ç, relative humidity: 9 to 9%, left for 9 hours. Contact resistance Conditions Measured at DC V Material / Finish Part Insulator Contacts Material Soft vinylchloride (UL94-) and Polypropylene (UL94V-) PBT resin (UL94V-) and Polycarbonate (UL94V-) Brass, and Zinc alloy Copper alloy or phosphor bronze Finish Tin plated and Nickel plated Tin plated or selective gold plated and silver plated.7w
2 HR Series High Performance Miniature Circular Connectors Product Number Structure Cable Plug HR A - L A A P C A 3 A (**) ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ ❾ Plug (Assembly type) and Receptacle HR - R C - SDL (**) ❶ ❸ ❹ ❻ ❼ ❽ Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. Attachment HR - R - SP (**) ❶ ❸ ❹ qmodel: Series name. HR is a enhanced shielding type. windication of terminal connector provided or not: For models with connectors on both sides, different signs are used depending on the type of connector on one side. eshell size: Indicates the outside diameter of the plug mating part. rconnector form: P: Straight plug LP or L: Right angle R: Receptacle tcable removal directions for a right angle plug are classified as follows: A: The cable removal direction is on the right with the guide facing upward viewed from the mating part. B: The cable removal direction is on the left with the guide facing upward viewed from the mating part. ytypes of connector : A connector with two or more varieties is classified by A, B, C,... unumber of icontact form: Classifies the type of as follows: The plug has only male, and the receptacle has only female. P: Male contact PC: Crimp male contact (assembly type plug) SC: Crimp female contact SD: Straight dip female contact SDL: Right angle dip female contact oshape of cable: S: Straight cord C: Curled cord!type of cable: Cables connected to the plug are identified by A, B, C,... when they are different in construction and number of cores.!cable length: indicates the length in mm of the cable connected to the plug. Curled cord length: Length of curled part Straight cable length: Cable length!shape of cable end: Plugs with cables of the same shape but different in cable end dimensions and finishing are identified by A, B, C,...!3Types of accessories: SP: Stopper plate!4other specifications: A two-digit character is added to indicate other specifications as needed.
3 HR Series High Performance Miniature Circular Connectors HR Type Ø4. Right Angle Plug Ø 33 HR-LAPS(7) No. of No. of conductors of cable HR-LAPS(7) conductor (Shielded) Straight cord Terminal tin plated max. Straight Plug HR-PPC3(7) No. of HR-PPCD3(7) -- 7 HR-PPC3(7) HR-PPCAE3(7) ØA ØB C No. of conductors of cable -conductor (Shielded) Curled cord Terminal tin plated -conductor (Shielded) -conductor (Shielded) Curled cord Terminal gold plated Receptacle (Crimp Type) M4 Ø.3.3 Hexagon nut 7.4 Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. 3 HR-R-SC(7) HR-R-SC(7) HR-R-SC(7) -4-7 : For the mounting holes, see page 4. 3
4 HR Series High Performance Miniature Circular Connectors Receptacle (Straight Dip Type).3 9. Ø Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved..9.4 Hexagon subtend dimension 7 M4 HR-R-SD(7) Dip post (3.3) (Grounding terminal) HR-R-SD(7) No. of HR-R-SD(7) -- 7 Dip post (..4) (Contact) Terminal tin plated : Refer to following diagram for panel mounting dimensions and dip post arrangement dimensions. Panel mounting dimensions Receptacle Dip Post (Panel thickness to 4.7) Hole for grounding terminal HR-R-SD(7) Ø. 3. Ø. ( places). Ø Ø.7 Hole for grounding terminal 3..4 ( places) Ø4..4. HR-R-SD(7) : Dimensional tolerance of ±.mm is recommended for the board arrangement. 4
5 HR Series High Performance Miniature Circular Connectors 3 Receptacle(Right Angle Dip). A B Dip post(.3) (Grounding terminal) HR-R-SDL(7) R.7 (Note) No. of A This product should be mounted on the panel to hold with the HR-R-SDL(7) interface portion,as shown in the -- 7 panel mounting hole dimension HR-R-SDL(7) diagram. 3. When it is difficult to press the HR-RC-SDL(7) -4-7 connector into the panel, we recommend using the attached : For dip post arrangement see below figure. stopper plate HR-R-SP(7) (-7-7) as described on page 7. B. 9.3 Terminal tin plated Equipped with stopper plate Terminal tin plated Panel mounting dimensions (Connector support part) 4 MIN. (For movement) MIN. (Connector support part) R. PCB Note: Pay attention that this dimension is not available for. Receptacle dip post arrangement Ø. ( places) HR-R-SDL(7) Grounding terminal holes ( places) Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. 3. Dip post(..4) (Contact) Grounding terminal holes ( places) Ø. ( places) HR-R-SDL(7) Position of applicable receptacle Ø. (4 places) HR-R-SP(7) (Stopper plate) (Applicable PCB thickness range -) : Dimensional tolerance of ±.mm is recommended for the board arrangement.
6 HR Series High Performance Miniature Circular Connectors.7 3 Receptacle (Right Angle Dip) 3. Stopper plate Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HR-RC-SDL(73) Dip post of stopper plate (4 pieces) Dip post.. ( ) 7 HR-RC-SDL(73) Uneven position Ø 9 0 Dip post. ( ground terminals).. Stopper plate Terminal gold plated : For dip post arrangement see below figure HR-RD-SDL(7) Dip post of stopper plate 4 pieces Dip post.4 ( ground terminal) Dio post.. ( ) 0 9 7 HR-RD-SDL(7) -- 7 Stopper plate Dip post Stopper plate Terminal gold plated : For dip post arrangement see below figure. Receptacle dip post arrangement Ø. ( places) HR-RC-SDL(73) 4 Grounding terminal holes Ø. ( places) Ø. ( places) Stopper plate holes Ø. (4 places) Grounding terminal holes Ø. ( place).. Grounding terminal holes Ø. ( places).. 4. Stopper plate holes Ø. (4 places) Positioning hole Ø. ( place) HR-RD-SDL(7) : Dimensional tolerance of ±.mm is recommended for the board arrangement.
7 HR Series High Performance Miniature Circular Connectors Stopper Plate HR-R-SP(7) -7-7 Applicable connector Applicable PCB thickness HR-R-*SDL t : to :. The *mark shows the number of pins.. For dip post arrangement,see page. HR Type ( ) /HR Type Right Angle Plug (With straight) A MAX. Ø4. 3 Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HR-R-SDL(7) HR-R-SP(7) Ø HR-LAPSAT(7) HR-LAPSAT(7) -- 7 HR-LAPSAT3(7) A No. of conductors of cable -conductor (Shielded) 3 : Cable can be taken-out only in direction A. 7
8 HR Series High Performance Miniature Circular Connectors Right Angle Plug (Assembly Type) Solder Type Ø4. 3. Inner dia. 3 㸳 Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. 㸵 㸰 㸲 㸯 㸱 㸴 㸶 HR-LP-P(7) HR-LP-P(73) HR-LP-P(74) No. of Color: Sand beige : Cable can be taken-out only in direction A. Note: Because the cable clamping and rotational forces may vary with different cable types, it is recommended to verify the suitability of the cable assembly before use or production. Crimp Type Ø4. 3. Inner dia. 3 HR-LP-PC(7) HR-LP-PC(7) -4-7 : Cable can be taken-out only in direction A. Note: Because the cable clamping and rotational forces may vary with different cable types, it is recommended to verify the suitability of the cable assembly before use or production. Straight Plug (With straight cable) A Ø3. Ø Ø4. 4 Max. HR-PPSAT4(7) HR-PPSAT4(7) -- 7 A No. of conductors of cable -conductor 4 (Shielded)
9 HR Series High Performance Miniature Circular Connectors Straight Plug (Assembly Type) Solder Type 4 Ø Ø4. Ø3. HR-P-P(7) HR-P-P(7) HR-P-P(7) HR-P-P(73) HR-P-P(74) Terminal: Tin plated Color: Sand beige Terminal: Tin plated Color: Sand beige Note: Because the cable clamping and rotational forces may vary with different cable types, it is recommended to verify the suitability of the cable assembly before use or production. Crimp Type 4 Ø4. Ø Ø3. Inner dia. HR-P-PC(7) HR-P-PC(7) HR-P-PC(7) HR-P-PC(7) HR-P-PC(7) Color: Sand beige Color: Sand beige Note: Because the cable clamping and rotational forces may vary with different cable types, it is recommended to verify the suitability of the cable assembly before use or production. Receptacle (Crimp Type) Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. Inner dia. Nut for M HR-R-SC(7) No. of HR-R-SC(7)
10 HR Series High Performance Miniature Circular Connectors Receptacle (Straight Dip Type) Nut for M. Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HR-R-SD(73) HR-R-SD(73) HR-R-SD(74) Terminal: Tin plated : For dip post arrangement, see below figure. Receptacle (Right Angle Dip Type) Nut for M HR-R-SDL(73) HR-R-SDL(73) HR-R-SDL(7) -3-7 Terminal: Tin plated Color: Sand beige : For dip post arrangement, see below figure. Receptacle Dip Post Layout Ø HR-R-SD ( places) Grounding terminal holes.. ( place) Grounding terminal holes.. ( place) Ø. ( places) HR-R-SDL : Dimensional tolerance of ±.mm is recommended for the board arrangement.
11 HR Series High Performance Miniature Circular Connectors Receptacle (Right Angle Dip Type) HR-RA-SDL(74) HR-RA-SDL(74) HR-RA-SDL(7) -4-7 HR-RA-SDL(73) Color: Sand beige Terminal: Tin plated Color: Sand beige : For dip post arrangement, see below figure 㸰 㸱 㸳 3. 㸯 Positioning pin Ø HR-RC-SDL(74) HR-RC-SDL(74) : For dip post arrangement, see below figure. 9. 㸶 㸵 㸳 Positioning hole Ø. ( place) Grounding terminal hole Ø. ( places) 㸱 㸯 Ø. ( places) 4.. 㸴 㸲 㸰 Grounding terminal hole.. places..4 Receptacle Dip Post Layout 4.3 Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved Ø. ( places). HR-RA-SDL HR-RC-SDL : Dimensional tolerance of ±.mm is recommended for the board arrangement.
12 HR Series High Performance Miniature Circular Connectors Straight Plug Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. φ 4 3 Ø Max HR-4PPSD(7) HR-4PPSD(7) -- 7 No. of No. of conductors of cable -conductor (Shielded) Straight cord Terminal: silver plated Right Angle Plug Ø Ø Ø Max. HR-4LAPC3(7) Ø 4 3 HR-4LAPC3(7) : Cable can be taken-out only in direction A. No. of No. of conductors of cable -conductor (Shielded) Curled cord Terminal: silver plated
13 HR Series High Performance Miniature Circular Connectors Receptacle (Crimp Type) 㸰 㸱 㸲 㸳 4. 㸯. HR-4RA-SC -4- With hexagon nut Receptacle (Right Angle Dip Type). Ø 㸰 㸱 㸲 㸳 4. 㸯 Dip post.. (Contact) Dip post (.9) (Grounding terminal) HR-4R-SDL No No Grounding terminal hole Ø.3 (4 places) No (Dip Post Layout) HR-4RA-SDL -- With hexagon nut Terminal: silver plated.9 No Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved.. Ø HR-4RA-SC Ø. ( places) : Dimensional tolerance of ±.mm is recommended for the board arrangement. 3
14 HR Series High Performance Miniature Circular Connectors Contact Female Contact A Type A.. Loose Reel Plated Applicable wire -4- Selective gold plated HR-SC Silver plated HR-SC-3-4- Tin plated HR-SC Selective gold plated HR-SC Silver plated HR-SC Tin plated to 3 AWG Note. Use cables with cable covering outer dia. Ømm or less.. Loose piece are packaged pcs/pack. Reel are packaged, pcs/reel. Section A-A Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HR-SC- Male Contact A.. Type Loose HR-PC- -- HR-PC-3(7) Reel HR-PC- --9 HR-PC-3(7) -- 7 Plated Applicable wire Selective gold plated Tin plated Selective gold plated to 3 AWG Tin plated Note. Use cables with cable covering outer dia. Ømm or less.. Loose piece are packaged pcs/pack. Reel are packaged, pcs/reel. Section A-A Applicable tools Type Item Applicable terminal Automatic Manual HR-PCHR-SC-TC --9 HR-SC- 3 Automatic crimping machine body CM-C Applicator AP-HR- HR-SC-TP 9--9 RP-SC-TP (HR-SC-TC) Hand Crimp Tool to 3 AWG (7) HR-SC- 3 to 3AWG HR-SC (7) HR-PC 3(7) Extraction tool 4 3(7) Manual crimping tool HR-PC- Applicable wire (HR-SC-TP) (RP-SC-TP) Extraction Tool Auto Crimp Tool CM-C
15 HR Series High Performance Miniature Circular Connectors Cable Connecting Procedures Works Process Right-angle Plug Straight Plug Use cables of finished dia. 4.mm and nominal conductor cross section of.9mm (AWG#) and under. (Inner dia. of solder pot of soldering terminal is Ø.7mm.) Insert bushing over cable as shown in Fig.. Install hood over cable. Figure of straight type is omitted. - Soldering type Copper tape Crimping type.. Approx. C Bushing Shied cable 3 Mold block or mold P shell A P shell B Fig. Make cable end treatment to the dimensions shown in Fig.. For shield cable, an example of cable end treatment is given below. () Firmly wrap the cable sheath end with copper tape mm wide, mm long and µm thick (overall thickness including adhesive). () Bundle up the shield cables, and tight twist. (Twist at least three turns over mm in length from the cable sheath tip) (3) Cut the shield cables at -mm from the cable sheath tip, and fold back as shown in Fig.. 4 (Soldering Type) Solder cables to mold block into which terminals are assembled. (Crimping Type) Use applicable tool (HR-SC-TC or CM-) to crimp connect cables to applicable crimping terminals, then insert crimped terminals into mold and fix them to complete the mold block. Assemble mold block having cables connected to location P shell A as shown in Fig.. Carefully note that mold block and P shell A have directional polarization. Assemble bundled shield cables so that they are positioned at the center (C section) of cable outlet of P shell A as shown in Fig.. Install P shell B over P shell A as shown in Fig. and avoid catching of internal cables. Use the M self-tapping screws supplied (shape of screw head is phillip # for precision machinery) to secure from the direction of P shell B ( places). 7 Cable Casing Ø4. Self-tapping screw P shell A Fig.. Move bushing to the end face of P shell, and put P shell and bushing into the casing as shown in Fig.. P shell B With groove of hood and protruding portion of P shell aligned, install hood over P shell as shown in Fig.3. Hood Cable Ø4. Groove of hood Install casing over P shell as shown in Fig.4. Cable P shell Bushing Protruding portion Fig.3 9 Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. Ø4. Cable Fig.4 Now assembling is completed.
16 HR Series High Performance Miniature Circular Connectors Terminal Arrangement and performance Shell size sizes 㸦 Terminal arrangement 㸧 㸦 㸪 㸨 㸪 㸫 㸭 㸬 㸫 㸭 Withstand voltage Nov.. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. Powered by TCPDF ( 㸧 㸩 㸨 㸪 㸩 㸨 㸧 㸦 3V AC for minute Rated current A Insulation resistance Mø or more at V DC Contact resistance 3mø or less (excluding cable conductor resistance) Shell size 4 sizes 㸦 㸧 㸨 㸩 㸪 Terminal arrangement Withstand voltage 3V AC for minute Rated current A Insulation resistance mø or more at V DC 3mø or less (excluding cable conductor resistance) Contact resistance :. The above figures show the receptacle pin inserts as viewed from the mating side.. Withstand voltage shows the testing voltage. 3. Contact resistance is as measured at A DC. --3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 4-4,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 7/. Contents are subject to change without notice for the purpose of improvements.
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationCircular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
More informationHigh Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
More information125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
More information-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth
More informationSmall-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More informationLow Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More informationNew Connectors For Low Profile Power Supply
NEW New Connectors For Low Profile Power Supply RP34L Series Receptacle installed height RP34L Existing RP34 (3-contact type) (2-contact type) Fig.-➀ Features 1. Low profile: These receptacles are designed
More informationMiniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More information0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More information0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
More informationPower Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
More information1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
More information0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More information0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single
More informationMiniature push-pull connectors with ground function
Miniature push-pull connectors with ground function MXR Series Jul.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Product Specifications Ratings Rated current Rated voltage Features
More information0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
More information1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
More informationUltra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
More informationSMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
More information3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
More informationI/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
More informationHigh Current Connector
High Current Connector Series 1U Nov.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features 1. Power contact supports up to 10 mps (210/1pin Derating curve, ambient temp 2 C) with
More informationSMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
More informationSmall I/O connectors for AC adapters
Small I/O connectors for C adapters RP34 Series Sep.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Features 1. Superior mating operability snap-and-lock
More informationHigh Performance, Miniature Circular Connectors
High Performance, Miniature Circular Connectors HR22 Series Product specifications Ratings Rated current 2A Operating temperature range -25ç to +85 Rated voltage 100V AC, 140V DC Storage temperature range
More information1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More information2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
More informationMD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
More information0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
More informationPower Supply Connectors For Industrial Equipment
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More information0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
More information0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationUltra Low-profile Interface Connectors with 2.0 mm Mounting Height
Ultra Low-profile Interface Connectors with.0 mm Mounting Height LX Series Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low profile on the PCB When mounted on the
More information2mm Pitch Miniature Connector for HDD
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
More informationGT16 Series. Subminiature Connectors for coaxial cables
GT5 Sep.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT16 Series Subminiature Connectors for coaxial cables
More information3.5mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard)
3.mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard) MDF6 Series Inner type positive lock Features 1. Miniature type with 3.mm pitch A miniature, space-saving
More informationDC to 6GHz Ultra-Small Coaxial Switch
DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)
More informationFISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
More informationK CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More informationWaterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More information0.5mm and 1mm Pitch FPC/FFC Connectors
0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More informationWaterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41 Series Bayonet Lock Mating Mark Features 1. Waterproof connector designed for outdoor use Light weight, waterproof connector designed to withstand outdoor environments.
More informationBH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationHigh Voltage Wire-to-Board Connectors
High Voltage Wire-to-Board Connectors MDF51 Series Simple and secure mating with one push Socket Header Lock Fig.1 Features Secure hold during the soldering operation 1. Simple, one step mating Built-in
More informationGT11 Series. Connectors for shielded cables. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 22 GT 25 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 PO5G GT 16 GT 10 GT 18W GT 9 GT 8 GT 15 GT 13 GT 5 GT11 Series Connectors for shielded cables Features A housing lance systems has been used to
More informationHigh Current, High Density, Power Connectors
High Current, High Density, Power Connectors MCN1 Series Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection
More informationHyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationHigh Current Connector
High Current Connector PS2 Series and signal contacts together in one unit with dedicated power contacts to handle 100, 200 or 300 Amps. 2. Floating Structure The structure allows up to ±2.5 mm of float
More informationSubminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is
More informationFor Antenna. In-vehicle shielding connector with twin crimp technology. GT5 Series Connectors for coaxial cables ----
Patented GT In-vehicle shielding connector with twin crimp technology GT6 GT6 GT GT2 GT In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna
More informationWater-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More information0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors DF36 Series High contact reliability Effective mating length of 0.4 mm 1.5±0. (Mated height) (0.4) (Effective mating length) Enhanced
More informationProduct Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationCF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications
CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization
More informationCompact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth
More informationORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
More informationCircular Connectors Supporting TÜV and MIL spec.
Circular Connectors Supporting TÜV and MIL spec. H/MS Series Product Specifications Standard products Ratings Ratings Features 1. Compatible with MIL spec. standard products 2. A ground circuit is provided
More informationMiniature Waterproof Plastic Connectors
Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 32.3 3 and pos. Ø12. Features 1. Small-size with low profile 3, contacts : Maximum outer diameter Ø12.mm Mated length 32.3mm (from the
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationTajimi Electronics Co
1108 series 1108 series connectors are built compact and the tight waterproofing mechanism allows the model to be at a depth 30 meters under water. This model is also ideal for application where units
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
More informationDISPOSABLE COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES
B10 CHAPTER FISCHER CORE SERIES DISPO COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES Sterilizable (EtO), gamma) Color-coded for easy integration Single or two-piece shell Lightweight and shock resistant
More informationGT32 Series Shielded connector for high speed transmission / USB3.0, HDMI For Network, High speed communication
Sep..208 Copyright 208 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. GT32 Series ---- Shielded connector for high speed transmission / USB3.0, HDMI.4 ---- Features Full shielded structure Suitable for
More informationMiniature Waterproof Plastic Connectors
Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 32.3 3 and 6 pos. Ø12.6 Features 1. Small-size with low profile 3, 6 contacts: Maximum outer diameter Ø12.6mm Mated length 32.3mm (from
More informationAmphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationFISCHER ULTIMATE TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES
H CHAPTER PAGES FISCHER TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES IP68 to -0m / IP69 / Hermetic 60 EMC shielding High corrosion resistance 0,000 mating cycles H - FISCHER TM SERIES Table of contents
More information0.5 mm and 1 mm Pitch FPC/FFC Connectors
0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More information