M40-600/620 Connectors Specification
|
|
- Paula Lewis
- 6 years ago
- Views:
Transcription
1 M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage proof: ontact resistance: Insulation resistance: High Temp Thermoplastic, UL94V-0 Phosphor ronze Tin 0.5 per contact 150V 250V 50mΩ max 500MΩ min Mechanical Durability: Insertion force (max): Withdrawal force (min): Environmental Operating temperature: Solderability: Soldering heat resistance: 30 operations 2.7N per contact 0.4N per contact -20 to for 5 seconds 260 for 10 seconds 1mm (.039") PITH Mating Profile
2 M40 onnectors Vertical Surface Mount 1mm (.039") PITH Locating pegs to ensure correct positioning onto the board. Polarised to prevent mis-mating. Staggered pin-out to help board layout. FEMLE Ø E Recommended P oard Pattern Ø D LULTION MLE (Total No. Of ontacts 3) / D E mm for 9, 15, 21, 25 way; otherwise 0.80mm 1.84mm for 9, 15, 21, 25 way; otherwise 3.00mm Ø E Ø D Recommended P oard Pattern 1.95 SERIES ODE GENDER 0 Male M40-6 X 0 XX XX X PKGING lank Loose R Tape & Reeled FINISH 46 Tin 2 Female TOTL NO. OF ONTTS 09, 15, 21, 25, 31, 41,
3 M40-310/320 onnectors Specification range of double row mm pitch SMT pin header and socket connectors. Materials Mouldings: ontacts Male: Female: Finish: Electrical urrent: Voltage proof: ontact resistance: Insulation resistance: High Temp Thermoplastic, UL94V-0 rass Phosphor ronze Gold 1.0 per contact 500V 30mΩ max 1,000MΩ min Mechanical Durability: Insertion force (max): Withdrawal force (min): Vibration sensitivity: Shock severity: Environmental Operating temperature: Solderability: Soldering heat resistance: 300 operations 1.5N per contact 0.1N per contact Hz, 45 minutes duration 294m/s² (30G) for 11ms -40 to for 5 seconds 260 for 10 seconds 1mm (.039") PITH Mating Profile
4 M40 onnectors Vertical Surface Mount 1mm (.039") PITH Locating pegs to ensure correct positioning onto the board. Supplied in tape and reel packaging with pick and place caps as standard. Twin beam female connector for higher durability. FEMLE LULTION No. of contacts per row - 1 No. of contacts per row Ø Ø Recommended P oard Pattern MLE LULTION No. of contacts per row No. of contacts per row - 1 No. of contacts per row square Ø Ø Recommended P oard Pattern SERIES ODE GENDER 1 Female 2 Male M40-3 X 0 XX 45 R TPE & REELED FINISH 45 Gold NO. OF ONTTS PER ROW 03, 04, 05, 06, 08, 10, 20,
5 M40 able-to-oard Specification range of cable-to-board connectors on mm pitch - SMT male connectors and cable female connectors in single and double row options. Materials Mouldings SMT onnectors: able Housings: ontacts: Finish: Electrical urrent: Working voltage: Voltage proof: ontact resistance: Insulation resistance: High Temp Thermoplastic, UL94V-0 Thermoplastic, UL94V-0 Phosphor ronze Tin 1 per contact 50V /D 500V /D 30mΩ max 100MΩ min Mating Profiles Mechanical Durability: 50 operations Insertion force (max): 2.0N per contact Withdrawal force (min): 0.4N per contact rimped wire retention (min) 28 WG wire: 12.7N 30 WG wire: 9.8N 32 WG wire: 4.9N Vibration sensitivity: 10 55Hz, 1.5mm, 6 hours duration Shock severity: 490m/s² (50G) for 11ms Environmental Operating temperature: Solderability: Soldering heat resistance: -25 to for 5 seconds 260 for 5 seconds 1.27mm 1mm (.039") (.50") PITH FEMLE RIMP SINGLE ROW DOULE ROW VERTIL SMT 6.85 max 6.85 max MLE 7.70 max HORIZONTL SMT 162
6 M40 able-to-oard onnectors Female rimp Housings 1mm (.039") PITH rimp contacts or pre-cabled contacts are orderd separately - see following pages. rimped contacts on wires are inserted into rear of connector housing - no additional tooling required. SINGLE ROW LULTION + 4 DOULE ROW LULTION + 4 No. of contacts per row - 1 No. of contacts per row M40-1X0 XX 00 SERIES ODE TYPE 110 Single Row 120 Double Row NO. OF ONTTS PER ROW 02 to 20 Single Row 05 to 10, 12, 15, 20, 25 Double Row 163
7 M40 able-to-oard onnectors Female rimp ontacts Open crimp design, ideal for automation. Use with female crimp housings shown on previous page. Pre-crimped contacts with wire attached shown on following page. Requires crimp machine with applicable tooling for crimping to wires. 1mm (.039") PITH ONTTS Order code is for one reel of 15,000 contacts WIRE STRIPPING DETIL Ø0.75 max 28 to 32 WG 1.30 to 1.50 M SERIES ODE FINISH 46 Tin 164
8 M40 able-to-oard onnectors Female rimp ontacts - Pre-rimped Wires 1mm (.039") PITH Female crimp contacts pre-assembled wit a choice of wire sizes and lengths. PV insulated muti-strand tinned copper equipment wire to UL1571. Use with female crimp housingd shown on previous page. Ideal for prototype and pre-production applications. Individual contacts without wire shown on previous page. FEMLE SINGLE ENDED able Length FEMLE - FEMLE able Length M40-9XX LE OLOUR 99 Red SERIES ODE SINGLE ENDED FEMLE - FEMLE WG cable, 150mm length WG cable, 150mm length WG cable, 300mm length WG cable, 150mm length WG cable, 150mm length WG cable, 150mm length 165
9 M40 able-to-oard onnectors Male Vertical Surface Mount Shrouded male connectors. Double row connector features locating pegs to ensure correct positioning onto the board. Tape and Reel option supplied fitted with pick and Place cap. 1mm (.039") PITH SINGLE ROW LULTION + 3 No. of contacts per row Recommended P oard Pattern DOULE ROW SERIES ODE TYPE 1 Single Row 2 Double Row 0.20 M40-30 X XX 46 X LULTION +3 No. of contacts per row Ø Recommended P oard Pattern PKGING lank Loose R Tape & Reeled FINISH 46 Tin NO. OF ONTTS PER ROW 02 to 20 Single Row 05 to 08, 10, 12, 15 Double Row 166
10 M40 able-to-oard onnectors Male Horizontal Surface Mount 1mm (.039") PITH Shrouded male connectors. Tape and Reel option does not require Pick and Place cap. SINGLE ROW LULTION + 3 No. of contacts per row Recommended P oard Pattern M XX 46 X SERIES ODE NO. OF ONTTS PER ROW 02 to 20 PKGING lank Loose R Tape & Reeled FINISH 46 Tin 167
11 M30 onnectors Specification range of 1.25mm pitch male and female connectors, for cable-to-board applications. Material Mouldings SMT: Others: ontacts Male: Female: Finish: Electrical urrent: Working voltage: Voltage proof: ontact resistance: Insulation resistance: Nylon 6T, UL94V-0 Nylon 66, UL94V-0 rass Phosphor ronze Tin 1 per contact 150V 500V /D 30mΩ max 500MΩ min Mechanical Durability: Insertion force (max): Withdrawal force (min): rimp retention (min): 50 operations 4.9N per contact 0.5N per contact 4.9N per contact rimped wire retention (min) 26 WG wire: 19.6N 28 WG wire: 9.8N 30 WG wire: 7.8N Vibration sensitivity: 10 55Hz, 1.5mm, 6 hours duration Shock severity: 490m/s2 (50G) for 11ms Environmental Operating temperature: Solderability: Soldering heat resistance P Tail: SMT: -25 to for 5 seconds 250 for 5 seconds 260 for 10 seconds 1.25mm 1.27mm (.049") (.50") PITH Mating Profiles MLE P TIL SMT FEMLE RIMP 5.95 max 6.45 max 168
12 M30 onnectors 1.25mm (.049") PITH Female rimp Housing Loose or reeled contacts. rimp contacts or pre-cabled contacts are ordered separately - see the following pages. HOUSING LULTION x (No. of contacts per row - 1) M XX 00 SERIES ODE NO. OF ONTTS PER ROW 02 to
13 M30 onnectors Female rimp ontacts Loose or reeled contacts. Open crimp design, ideal for automation. Use with female crimp housings shown on previous page. Pre-crimped contacts with wire attached shown on following page. ONTTS HND RIMP TOOL 1.25mm (.049") PITH Reeled (continuous strip) Order code is for one reel of 10,000 contacts Instruction sheet is available at /instructions. For use with loose contacts ORDER ODE Z Loose (cropped) Order code is for one pack of 100 contacts max WIRE STRIPPING DETILS Ø0.65 to 26 to 30 WG 1.20 to 1.90 M X SERIES ODE TYPE 5 Reeled contact 6 Loose contact FINISH 46 Tin 170
14 M30 onnectors 1.25mm (.049") PITH Female rimp ontacts Pre-rimped Wires Female crimp contacts pre-assembled with a choice of wire sizes and lengths. PTFE-insulated, multi-strand silver-plated copper conductor equipment wire. Use with female crimp housings shown on previous page. Ideal for prototype and pre-production applications. Individual contacts without wire shown on previous page. FEMLE SINGLE ENDED able Length FEMLE - FEMLE able Length M30-9XX LE OLOUR 99 Red SERIES ODE SINGLE ENDED FEMLE - FEMLE WG cable, 150mm length WG cable, 150mm length WG cable, 300mm length WG cable, 150mm length 171
15 M30 onnectors Male Vertical Shrouded male connectors. SMT version features metal solder-down tabs and locating pegs to ensure correct positioning onto the board. Tape and Reel option supplied fitted with Pick and Place cap, contact for availability. P TIL LULTION 1.25 x (No. of contacts per row + 1) 1.25 x (No. of contacts per row - 1) 1.25mm (.049") PITH Ø square Recommended P oard Pattern SURFE MOUNT 3.40 LULTION x (No. of contacts per row - 1) square Ø Ø Recommended P oard Pattern 1.80 M30-6 X 0 XX XX X PKGING SERIES ODE lank R Loose Tape & Reeled (M30-600) TYPE 0 Surface Mount FINISH 46 Tin 1 P Tail NO. OF ONTTS PER ROW 02 to
Gecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.
onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts
More informationGecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More information1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More informationDynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationSpecifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0.
05 rimp Type onnectors For Mating To Mate With ss y Pitch onnectors Wire to oard onnectors connectors are miniature type connectors which were developed with concepts for versatile usage for P.. board
More informationComponent Specification
1.0 DESCRIPTION OF CONNECTOR AND INTENDED APPLICATION. The M80 series stamped female Trio-Tek open barrel crimp contact and rectangular Trio-Tek crimp housing form part of the Datamate J-Tek range of 2mm
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationconnectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE
connectors range Special OMMIL SU-MINITU Standard HIGH POMN SU-MINITU LXIL N ST SSMLY SU-MINITU High ensity INS NSITY SU-MINITU ccessories onnectors Special OMMIL SU-MINITU Special range of connectors
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationPCB layouts. High Density D only. 50 way 50 way DIMENSIONS. 15 way High Density D 26 way High Density D. 62 way High Density D. 44 way High Density D
Straight p.c. - way 0º p.c. - way P layouts 2.84 S 2 Ø 0.76 min. S 2 Ø 0.76 min. Plug viewed from above, socket viewed from below. 2 holes at Ø 3.2 min. (2 holes at Ø 3.0/3. boardlock only)* ONT 2 holes
More information2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
More informationPCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch
XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated repairs. Hold-down
More informationAdam Technologies, Inc.
INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016
More informationPCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch
New Product XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated
More informationEH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high
More informationBH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
More informationSmall-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
More information3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
More informationRA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
More informationSingle 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
More informationFAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
More information1.27mm DUAL ROW FEMALE HEADER
1.27mm DUAL ROW FEMALE HEADER 1296 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ).SMT! Available in 8 through 100 circuits! Contact Material: Copper alloy! Insulator Material: Thermoplastic UL 94V-0! Suitable for
More informationRWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More information1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationDirectory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
More information.050" IDC CONNECTORS DUAL ROW SOCKET / PADDLEBOARD PLUG HFCS & HFDP SERIES ADAM TECHNOLOGIES ORDERING INFORMATION HFCS 50 SG. RoHS
DM TECHNOLOGIES.050" IDC CONNECTORS DUL ROW SOCKET / PDDLEORD PLUG HFCS & SERIES INTRODUCTION: dam Tech HFCS Series.050 IDC Sockets are low profile, precision designed flat cable sockets that feature either.050
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CCF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 25.4 x 14.9
More informationHPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION
PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More information0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More information1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More informationPROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
More informationEH CONNECTOR. 1Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
More informationWater-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationMulti-Pole Rectangular Connectors Specifications Table
Multi-Pole Rectangular Connectors Specifications Table Multi-Pole Rectangular Connectors Specifications Table Number of Poles Rating Insulation Resistance Dielectric Strength Contact Resistance Insertion
More informationDip and coded rotary switches
Dip and coded rotary switches Section P (R) Low profile coted rotary, SMT or through-hole PT (R) oded rotary, through-hole DS/DSR Standard DIP DP/DPL Piano DIP D Right angle DIP IKN Low profile DIP, SMT
More information0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationCF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationPH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. 2.0mm
Crimp.mm (.") pitch PH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features This is a thin, lowprofile.mm (.") pitch connector.mm (.") in height after mounting and.mm (.1") in width. It
More informationHYDROCON Standard Sealed Connectors
HYDROCON Standard Sealed Connectors Ratings: 2 & 3 Pole 10A 250V AC/DC 4 Pole 6A 250V AC/DC 6 & 7 Pole 3A 250V AC/DC 9 Pole 5A 150V AC/DC 25 Pole 1A 50V AC/DC Contact Resistance:
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationWEATHER-PACK. Special Products. Cross Sectional View WEATHER-PACK FEMALE TERMINALS (SLEEVE) SEALED* WEATHER-PACK CABLE SEALS
pecial Products ELE E L E WETHER-PK ross ectional View leeve Pin Hinged TP Hinged TP able onnector eal able eal able able eal Female onnector ssembly Male onnector able eal WETHER-PK FEMLE TERMINL (LEEVE)
More informationMICRO-CONNECTOR CMM SERIES
MICRO-CONNECTOR CMM SERIES CMM Series Micro-connectors NICOMATIC specializes in the design, development and manufacture of electronic connectors. The CMM MICRO CONNECTOR interconnection system is a 2mm
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationKSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
More informationE-Mark s business philosophy centers upon providing. each of its customers with maximum value. operates out of its facility in Shelton, Connecticut.
Company Profile E-Mark s business philosophy centers upon providing each of its customers with maximum value. This includes product quality appropriate for the application, accurate delivery & competitive
More informationEMC Shielding. Contents
EMC Shielding Contents Introduction SMT Shielding Clips Shielding Cans for SMT Clips Spring Contacts Positive Stop Extended (Antenna) Box Style Multi-Directional Development Kit EMC Shielding Introduction
More informationRockStar HighPower. Contents. RockStar HighPower Introduction C.2 C.1
ontents Introduction.2 HighPower 250 A.4 4000 V 250 A 1 4 poles HighPower 550 A.10 4000 V 550 A 1 3 poles.1 Introduction Uncompromising power in clever and safe packaging. The modular high-current connector
More information1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More informationMini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
More informationCatalog C-001 Rev. G
atalog -001 Rev. G Experience Founded in 1966 Involvement in the development of international connector specifi cations through EI, IE and ISO as well as PIMG. Introduction of new and unique connector
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth
More informationCONNECTION CONNECTION. Free Call:
ONNETION Amphenol AT Series Bulk Packs Receptacles, Plugs and Wedges 2, 3, 4, 6, 8 and 12 Way 33 Amphenol AT Series omplete Sets Receptacles, Plugs and Wedges 2, 3, 4, 6, 8 and 12 Way 34 Amphenol Pin ontacts,
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CIF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 18.4 x 15.5
More information0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
More informationBATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
More informationMODULAR TELEPHONE JACKS
dam Technologies, Inc. MODULR TELEPHONE JKS INTRODUTION: dam Tech MTJ series Modular Telephone Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules
More information0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
More informationD-SUB Series. Electrical Max current rating per contact : 7.5 A. Insulation resistance : 5000 MΩ Contact resistance : 10 mω
-SU Series pplications For military and aerospace applications. s MiL- 24308 HE 501 HE 508 HE 507 haracteristics Mechanical Shell : cadmium plated steel Insulator : monothermoset and two parts thermoplastics
More informationMIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
More informationCONNECTORS 2MM SERIES
EDITION 2011 ATI ELECTRONIQUE CONNECTORS 2MM SERIES 210 SERIES INTRODUCTION 210 series is a range of 2 mm pitch connectors for printed-circuit, created for low intensity applications. Its small mass allows
More information0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
More information0.5mm and 1mm Pitch FPC/FFC Connectors
0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear
More informationPRODUCT SPECIFICATION
MultiCat TM In-line Power Connector System WIRE-TO-WIRE AND WIRE-TO-BOARD MALE CRIMP CONTACT (201845-00X0) FEMALE CRIMP CONTACT (201846-00X0) PLUG HOUSING (201840-00XX) RECEPTACLE HOUSING (201841-00XX)
More informationW Electrical Connector Subsea / Underwater / Marine
www.re-marine.com W Electrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and Lights Underwater Thruster Strain Termination Key eature:
More informationEMC Shielding Introduction. RFI Shield Clips Summary EMC SHIELDING.
EMC Shielding Introduction Harwin provides a range of Surface Mount Shield Clips, compatible Shield Cans, and a comprehensive selection of Spring Contacts, to solve a variety of EMC/RFI and grounding issues.
More informationCSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
- CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);
More informationMD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
More informationCBF CONNECTORS. Functional characteristics. Brief description. RoHS 2011/65/EU. Dimensional class: low. Standard colour: green
Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.65 x 20.75 mm (.459 x.817 in) Max approved wire size: solid: 1.5 mm 2 (IEC EN); 14 AWG (UL) stranded:
More informationTajimi Electronics Co
1108 series 1108 series connectors are built compact and the tight waterproofing mechanism allows the model to be at a depth 30 meters under water. This model is also ideal for application where units
More informationSpecial Products. Weather-Pack. Sleeve Pin. Cable Seal
S ross Sectional View Sleeve Pin Hinged TP Hinged TP able able Seal onnector Seal able Seal able Female onnector ssembly Male onnector able Seal Female Terminals (Sleeve) Sealed* Sleeve Part # able Range
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More information