Special Products. Weather-Pack. Sleeve Pin. Cable Seal
|
|
- Clement Norris
- 5 years ago
- Views:
Transcription
1 S ross Sectional View Sleeve Pin Hinged TP Hinged TP able able Seal onnector Seal able Seal able Female onnector ssembly Male onnector able Seal Female Terminals (Sleeve) Sealed* Sleeve Part # able Range (mm 2 ) Material Plating Tin rass Tin Tin rass Tin Tin rass Tin Tin rass Tin Female Terminal (Sleeve) Female onnector ssembly * Use of the 6060 gauge as a process control aid is recommended for terminals. See page 10.5 in the pplication Tooling section for details. able Seals Reel Part # Loose Part # able Dia. Material olor Silicone lue Silicone Gray Silicone Green Silicone Tan Silicone Purple Silicone Dk.Red Female onnector ssemblies Sealed # avities onnector ssembly olor Material lack P lack P66 HS IM lack P66 HS IM lack P lack P66 HS IM lack P66 HS IM lack P
2 S Sealed System pplication Information Terminals Tin Plated LE RNGE (mm 2 ): URRENT RNGE (MPS): TEMP RNGE O : to 125 RESISTNE:... VOLTGE DROP:... <3.0mV/amp ENTERLINE SPING (mm): LDE WIDTH (mm):... Pin and Sleeve TEMPERTURE RISE ( O ) TEMPERTURE RISE OVE MIENT (25 o ) VS URRENT* URRENT (MPS) MIENT TEMPERTURE ( O ) TEMPERTURE DERTING URVES* MXIMUM URRENT (MPS) * The test data are based on single circuits in free space and were generated using a Lumped Resistance model. This model does not account for all of the variables that would be present in an actual application. For actual product performance, contact your regional support representative. P (onnector Position ssurance) Male Terminal (Pin) able Seal Male Terminals (Pin) Sealed* Pin Part # able Range (mm 2 ) Material Plating Tin rass Tin Male onnector Tin rass Tin Tin rass Tin Tin rass Tin * Use of the 6060 gauge as a process control aid is recommended for terminals. See page 10.5 in the pplication Tooling section for details. Male onnectors Sealed # avities onnector olor Material lack P66 HS IM lack P ream P66 HS IM lack P lack P66 HS IM lack P66 HS IM lack P66 HS IM avity Plug* Part # avity Inside Dia. Material olor mm Silicone Green * avity plugs seal unused female and male cavities. SETION NOTES: Due to rigid tolerances of connector cavities, it is critical to meet all crimp dimensions as specified. Different color and connector indexing features are also available
3 S n environmentally sealed connection system that utilizes triple-rib peripheral silicone rubber seals and individual towers to provide terminal isolation for connector alignment. sealed systems are ideally suited for critical applications that require protection from environmental hazards. H: 20.8 H: 17.3 L: 40.5 W: 13.6 W: 16.5 Total Mated Length: 64.5mm L: Part No: Description: onnector ssembly 1F Size: 40.5L x 20.8H x 13.6W. Part No: Description: onnector 1M Size: 47.6L x 17.3H x 16.5W D H: 20.8 H: 17.5 L: 40.8 W: 21.5 W: 23.9 L: 47.0 Total Mated Length: 68.3mm. Part No: (lack) P66 HS IM (Lt. Gray) P6 Description: onnector ssembly 2F Size: 40.8L x 20.8H x 21.5W D. Part No: (lack) P (Md. Gray) P66 HS IM Description: onnector 2M (lip Slot) Size: 47.0L x 17.5H x 23.9W
4 S H: 23.5 H: 20.5 L: 39.2 W: 29.2 W: 31.9 L: 46.1 Total Mated Length: 65.8mm. Part No: Description: onnector ssembly 3F Size: 39.2L x 23.5H x 29.2W. Part No: Description: onnector 3M (lip Slot) Size: 46.1L x 20.5H x 31.9W olor: ream D. Part No: Description: P olor: Gray Material: PT E H: 24.9 H: 28.5 L: 40.3 W: 21.7 W: 24.1 L: 47.0 Total Mated Length: 68.3mm D. Part No: Description: onnector ssembly 4F Size: 40.3L x 28.5H x 21.7W E. Part No: Description: onnector 4M (lip Slot) Size: 47.0L x 24.9H x 24.1W
5 S H: 23.5 H: 20.4 W: 37.6 L: 39.0 Total Mated Length: 65.8mm W: 39.9 L: Part No: Description: onnector ssembly 4F Size: 39.0L x 23.5H x 37.6W. Part No: Description: onnector 4M (lip Slot) Size: 45.9L x 20.4H x 39.9W D. Part No: Description: P olor: Gray Material: PT F E H: 23.5 H: 20.7 L: 39.1 W: 52.1 Total Mated Length: 66.4mm W: 55.5 L: 46.2 D. Part No: Description: onnector ssembly 6F Size: 39.1L x 23.5H x 52.1W E. Part No: Description: onnector 6M (lip Slot) Size: 46.2L x 20.7H x 55.5W F. Part No: Description: P olor: Gray Material: PT
6 S H: 62.0 H: 63.5 L: 45.0 W: 91.0 W: 55.2 L: 69.9 Total Mated Length: 77.3mm. Part No: Part No: Description: onnector ssembly 22F Description: onnector ssembly 22M Size: 45.0L x 63.5H x 91.0W Size: 69.9L x 62.0H x 55.2W pplication: Pass-Through pplication: Pass-Through. Part No: Description: Secondary Lock Number Req: 4 olor: Natural
WEATHER-PACK. Special Products. Cross Sectional View WEATHER-PACK FEMALE TERMINALS (SLEEVE) SEALED* WEATHER-PACK CABLE SEALS
pecial Products ELE E L E WETHER-PK ross ectional View leeve Pin Hinged TP Hinged TP able onnector eal able eal able able eal Female onnector ssembly Male onnector able eal WETHER-PK FEMLE TERMINL (LEEVE)
More informationSpecifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0.
05 rimp Type onnectors For Mating To Mate With ss y Pitch onnectors Wire to oard onnectors connectors are miniature type connectors which were developed with concepts for versatile usage for P.. board
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationMCON INTERCONNECTION SYSTEM
MON INTERONNETION SYSTEM for the utomotive Industry TE UTOMOTIVE /// MON Interconnection System INNOVTIVE TEHNOLOGIES TE onnectivity (TE) is a leader in automotive connectivity and sensor technology. Our
More informationPremium Oxygen Sensor with OE SmartLink Connector
Premium Oxygen Sensor with O SmartLink onnector Oxygen Sensor Installation Guide Please read these instructions carefully before removing the installed oxygen sensor from your vehicle. ff Do NOT cut wires
More informationPOWER DISTRIBUTION MODULE - 8 POSITION - SEALED
POWER DISTRIUTION MODULE - 8 POSITION - SELED This module can be fitted with a mixture of 80 style components such as Mini fuses, mini circuit breakers, mini diodes, mini resistors and ISO 80 relays. It
More informationMCON INTERCONNECTION SYSTEM
MON INTERONNETION SYSTEM FOR THE UTOMOTIVE INDUSTRY TE UTOMOTIVE /// TLOG SOLUTIONS FOR FUTURE MOILITY The pace at which the E&E architecture of vehicles is being innovated is one of the major challenges
More information6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More information2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
More informationGecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.
onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts
More informationEH CONNECTOR. 1Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
More informationDT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30
ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories
More informationRWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.
More informationWatertight Wiring Devices
atertight iring evices atertight and eather Protective evices for emanding nvironments Plugs and onnectors one seal adjusts to any cable range Triple bypass seal keeps water away from electrical connections
More informationVacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
More informationD-73P disconnect and bypass switches
Switches atalog Data 008005EN Supersedes pril 2016 OOPER POWER SERIES D-73P disconnect and bypass switches ontents Description Page D-73P disconnect switch....2 D-73P3 bypass switch....5 D-73P-D cutout
More informationDynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
More informationButt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount
utt ontact Series 30 and 46 Snap-in Panel Mount TURS Sleek lack Matte ezel onvenient Snap-In ront Mount hoice of 6 utton olors SPST, SPT or PT ircuitry lternate ction, Positive eel and Overtravel Versions
More informationPin & Sleeve. Heavy Duty Industrial Wiring Devices for North American and European Markets
Pin & Sleeve Heavy Duty Industrial Wiring Devices for North merican and European Markets Pin & Sleeve SFETY, PERFORMNE ND DURILITY...IN SNP! Extensive Product Family: - Safe and reliable, portable electrical
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
0.5mm and 1mm Pitch onnectors For FP/FF FH Series Flip-lock Features 1. Ease of Use and Space Savings Only one finger or.9n (Newtons) of force is required to lock Hirose s rotational actuator (flip-lock)
More informationSection 5. Directional Couplers. Introduction
Section Directional ouplers Introduction t MDL, directional couplers have always received the engineering and manufacturing attention due a major component. wide variety of types are offered, often tailored
More information55 Watt K Triple Series DC/DC Converters
Features Very Low Noise, < mv P-P Maximum PCB Mounting with Optional Heat Sink or Chassis Mount Versions Efficiencies to 87 Common and Differential Mode Input Filtering Remote Sense On + Volt Output Single
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More informationVoltage 12V 18V 24V 36V 48V 72V 80V 96V 120V 144V Color Yellow Orange Red Gray Blue Green Black Brown Purple White PRODUCT INFORMATION
S onnector amily TURS Prevents accidental mating of components operating at different voltage levels Single-piece housing and unitized construction Provides industrial quality and durability P mounted
More informationDT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW
T amily Overview UTSH T, TM, and TP series environmentally sealed connectors are designed for cable to cable and cable to board applications. The T connectors are used in harsh environment applications
More informationMini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
More informationTrueSeal Thermoplastic Push-In Fittings
True Thermoplastic Push-In Fittings atalog 3501 aterials of onstruction aterial Fitting olor O-Ring P Polypropylene P Fluorocarbon omenclature xample: a4mc4-mg-v a 4 mc ttribute: Fitting body material
More informationquick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
More informationRepair harness. Repair Harnesses
Repair harness Repair Harnesses Truck side repair harness (2 plugs) 53632-B......2 Truck side repair harness (1 plug) 53470-02-B..4 MPX truck side repair controller harness 53625-MPX....5 MPX truck side
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationTYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
More informationatalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
More informationSelect Output & Color Temperature
IP67 WET RTED SURFE WR TYPE WR Type IP67 Wet Rated Flexible Linear Lengths Preassembled up to 32 ft. (384 in)* Regulated by class 2 circuit limitations Refer to driver data sheet for max lengths IP67 Wet
More informationClassic Update Series
J lassic pdate eries page 1 www.americanautowire.com 56-9-001 J lamp Two J-lamps (item T on this page) have been provided to retain the luster it iring in place (see photographs on pages 5 and 6). plice
More informationGecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
More informationPlug (male) Jack (female) Interface dimensions conformable to the standards: min. max. min. max. A B C D E H I
Plug (male) Plug Jack min. max. min. max. A B C D E H I Jack (female) Interface dimensions conformable to the standards: 279 Electrical data Requirements Mechanical data Requirements Environmental data
More informationDASH/MAIN HARNESS. NOTE: wires 400 & 401, must be twisted together.
Electric Speedo Ground 151 Turn Flasher 16A 4 150 8A, Cluster Connections 31 33 30 35 151 (electric speedo) 402 401 NOTE: wires 400 & 401, must be twisted together. 156D, E Panel Dimmer 8A 9, C 2D Headlight
More informationGround Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationASSEMBLY INSTRUCTIONS GT MIXED 150/280 SEALED CONNECTION SYSTEM
ASSEMBLY INSTRUCTIONS GT MIXED 150/280 SEALED CONNECTION SYSTEM NOTE: PLEASE CONTACT YOUR DELPHI SALES REPRESENTATIVE WITH ANY QUESTIONS OR COMMENTS CONCERNING THESE ASSEMBLY INSTRUCTIONS. COMPONENT P/N
More informationPVL Series Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves zpv06
PVL Series Solenoid & Remote Pilot Operated /8" & /4" Valves zpv06 Section www.parker.com/pneu/pvl asic Valve unctions... 3 Stacking System Overview... 4 eatures (PVL & PVL)... 5 Part Numbers Stacking
More informationSurface Mount Aluminum Electrolytic Capacitors
FETURES YLINRIL V-HIP ONSTRUTION LONG LIFE (7,000 ~ 10,000 HOURS) IE TEMPERTURE RNGE (-25 ~ +105 ) ESIGNE FOR REFLO SOLERING RoHS ompliant includes all homogeneous materials *See Part Number System for
More informationClassic Update Series L FRONT LIGHT KIT OPTIONAL Add-On Equipment: Look! Mopar B-body Weatherproof Universal Relay Kit
engine harness connector assembly ready to bolt onto firewall bulkhead apply silicone sealant to back side of connector after installing terminals Page 1 ook! front light connector American Autowire also
More informationHigh-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability
High-Flow Stainless Tubes H11 ll stainless construction for high strength and durability Use with all PCS cascades J in part number indicates next largest thread TUE TUE L = 12 18 24 36 HF093T-.090.076
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth
More informationV Series Manifold Valves with Collective Wiring Size 1. V Series Size 1 Pneumatic Connectors. Moduflex Valve System V Series Manifold Valves Size 1
Ordering Guide V Series Manifold Valves with ollective Wiring Size V Series Manifold Valves Size V Series Size Pneumatic onnectors PMDYY HMDXX MMDVA Moduflex PVL Size Electro-Pneumatic Manifold Valves,
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
More informationDC2-Wire Cylindrical Long-Distance No-Polarity Proximity Switches
D-Wire ylindrical Long-Distance No-Polarity Proximity Switches FL7M Series Rigid structure reduces damage from collision with workpiece. Long sensing distance (M: mm, M: mm, M: 5 mm) D -wire switch with
More informationMIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
More informationClassic Update Series
lassic Update eries FOR 1967-69 APPLIATION TI AAW KIT O NOT UPPORT T U OF A FATORY AMMTR. A A RPLAMNT FOR T AMMTR W UGGT T U OF A VOLTMTR INTA. TRMINAL KIT 92965220 A BN PROVI FOR YOU TO ONNT TI LUTR KIT
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationDelphi Harsh Environment Series (HES) Connection Systems
Receptacle Plastic w/ Male Terminals Dephi St. No. Deutsch PN (Receptacle Plastic w/ Male Terminals) Plug Plastic w/ Female Terminals Dephi St. No. Deutsch PN (Plug Plastic w/ Female Terminals) # of cavities
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
More informationRA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
More informationHeat Exchanger Accessories
TEMPERTURE CONTROL - SERIES 123W May be used directly to control small electric motors etc using SINGLE phase power supply to maximum of 6 amps. lso for low volt (12 or 24) DC power supplies to maximum
More informationElectrical. Hardware & Fastening Solutions. Battery Supplies. J-Case Fuses - Regular... Page 162
Flag Style... Page 156 Electrical Batteries... Page 153 Mounting Pads (Adhesive Backed)... Page 161 Battery Supplies J-Case Fuses - Regular... Page 162 Booster Cable Supplies... Page 153 J-Case Fuses -
More informationMCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
More informationSealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
More informationPositive Lock Receptacles
Positive Lock eceptacles Product Facts educed insertion force Locks onto tabs containing holes Housing insulates and serves as a removal tool Snap action tells assembler receptacle is mated properly Terminated
More informationINSTALLATION INSTRUCTIONS FOR PART APPLICATIONS See Application List Inside TOOLS REQUIRED: Phillips Screwdriver Cutting Tool
INSTLLTION INSTRUCTIONS FOR PRT 95-7801 PPLICTIONS See pplication List Inside 95-7801 KIT FETURES Double DIN Radio Provision Stacked ISO Units Provision KIT COMPONENTS ) Radio Housing ) Rear Support Tray
More informationBH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationbattery stud solenoid stud 6 GA. RED (FROM KIT) starter purple brown apply silicone sealant after installing terminals XB YB ZB XC YC ZC
I (M-FUSS, OOT, RI TRMILS SRIK TUI FOU I 5104 KIT). R M 15 M 15 positive battery cable (not included with this kit) (USSR UMPR FROM 5104 KIT) battery stud SOL T distribut terminals L and M, have been provided
More informationFeatures. P d max. (W) V max (Vdc) I max (A)
POLY-FUSE Resettable PTs Radial Leaded > USR Series USR Series RoHS escription The USR Series radial leaded device is designed to provide overcurrent protection for US applications where space is not a
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationaccessory connection rear body connection 40G 17A instrument cluster and map lamp ground 150A,B 15A 14A Circuit Branch 500A fog lamp switch
accessory rear body 19 9 11 instrument cluster and map 10A, 0 4 3 7 40G 18 30 17A 24 1A 14A 9 8A instrument cluster 4E 31 3 121 11 33 401 10A 39A 400 30 washer and wiper switch 93A, 94 93 glovebox, map
More informationHPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION
PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:
More informationCONNECTION CONNECTION. Free Call:
ONNETION Amphenol AT Series Bulk Packs Receptacles, Plugs and Wedges 2, 3, 4, 6, 8 and 12 Way 33 Amphenol AT Series omplete Sets Receptacles, Plugs and Wedges 2, 3, 4, 6, 8 and 12 Way 34 Amphenol Pin ontacts,
More informationINSTALLATION INSTRUCTIONS FOR PART APPLICATIONS 2006 Mitsubishi Eclipse
INSTLLTION INSTRUCTIONS FOR PRT 99-700 PPLICTIONS 006 Mitsubishi Eclipse 99-700 KIT FETURES DIN Head unit provision with pocket ISO DIN Head unit provision with pocket DDIN Head unit provision ISO Stacked
More informationHWH PARTS MANUAL SUB TABLE of CONTENTS TOOLS & CONNECTORS (Filename: MR75.DOC) (Revised: 19MAY17)
HWH PARTS MANUAL SUB TABLE of CONTENTS TOOLS & CONNECTORS (Filename: MR75.DOC) (Revised: 19MAY17) ML11428-75 (Click to View Entire Section PDF File No Links MR75-75Z) > Electrical Tools & Connectors >
More informationVishay Dale Inductors
IM Inductors Military, MIL-C- ualified, Type LT and Commercial, Molded FETURES Wide inductance range in small package. Flame retardant coating. Precision performance, excellent reliability, sturdy construction.
More informationEH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high
More informationPVL Series. Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves. Section C. C59
Series Solenoid & Remote Pilot Operated /8" & /4" Valves Section Moduflex www.parker.com/pneu/pvl asic Valve unctions...60 Stacking pplications...6-62 eatures ( & )...63 ommon Part Numbers-Stacking ( &
More informationSTRATO-THERM Terminals and Splices for High Temperature Applications
atalog 1308940 Introduction Product Facts Product available in temperature ranges of 500 F [260 ], 550 F [288 ], 650 F [343 ] and 1200 F [649 ] Product employs the famous and crimp ide range of wire sizes
More informationPolySwitch Resettable Devices Automotive Devices
PolySwitch Resettable evices utomotive evices We have provided PPT resettable devices for the automotive industry for over 25 years. With the advent of TS16949 and our continued involvement in the automotive
More informationDelphi Harsh Environment Series (HES) Connection Systems
Receptacle Plastic w/ Male Terminals Waytek Stock No. Deutsch PN (Receptacle Plastic w/ Male Terminals) Plug Plastic w/ Female Terminals Waytek Stock No. Deutsch PN (Plug Plastic w/ # of Female Terminals)
More informationFEATURES SPECIFICATIONS
RS 1 FETURES 2 3 1 High Pressure Viton Shaft Seal offers superior seal life and performance and eliminates the need for case drain. 2 Pressure Fed earing surface receives positive flow of clean, cool oil.
More informationINSTALLATION INSTRUCTIONS FOR PART APPLICATIONS. Kia Rio/Rio Cinco TOOLS REQUIRED:
INSTLLTION INSTRUCTIONS FOR PRT 99-1007 PPLICTIONS Kia Rio/Rio Cinco 2002-2005 99-1007 KIT FETURES Recessed DIN Mount Radio Provision with pocket ISO Mount Radio Provision with pocket KIT COMPONENTS )
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationAMPSEAL 16* Connector System 24 JUN 13 Rev C
Application Specification 114-13065 AMPSEAL 16* Connector System 24 JUN 13 i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
More informationINSTALLATION INSTRUCTIONS FOR PART APPLICATIONS Toyota Tacoma
INSTLLTION INSTRUTIONS FOR PRT 99-824 KIT FETURES DIN Head Unit Provision With Pocket ISO DIN Head Unit Provision With Pocket DDIN Head Unit Provision Stacked ISO DIN Head Unit Provision KIT OMPONENTS
More informationconnectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE
connectors range Special OMMIL SU-MINITU Standard HIGH POMN SU-MINITU LXIL N ST SSMLY SU-MINITU High ensity INS NSITY SU-MINITU ccessories onnectors Special OMMIL SU-MINITU Special range of connectors
More informationFire & Smoke Resistant Connector
Fire & Smoke Resistant onnector The plastic rectangular solution offering an excellent fire and smoke resistance for Railway indoor applications. ompliant to railway standards Tested according to N 50
More informationMX150L ASSEMBLY INSTRUCTIONS
CONNECTOR PLUG ASSEMLY TERMINAL INSERTION MX150L ASSEMLY INSTRUCTIONS 1. egin assembly of the crimped male terminals into the plug housing by making sure the Terminal Position Assurance feature () is in
More informationFirebird Classic Update Series Kit Firebird
WNIN: Validate the kit contents with the component list included on this page, before proceeding. This kit is intended to be used in a modified vehicle. Please read this page thoroughly and be sure that
More informationWater-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationA16 Series PTC Devices
PROUT TSHEET Series PT evices Series PT evices escription JTFUSE Series Radial Leaded PTs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationMagHex Fan Controller
MagHex Fan ontroller 0916 ompact Programmable Temperature Sensor This combined sensor and controller is designed to mount directly to the heat exchanger. It provides accurate temperature control by cycling
More informationClassic Update Series
Classic Update Series START HERE! PLEASE READ THIS EFORE STARTING INSTALLATION! This wiring kit is designed for ease of installation. Please read the guidelines below, EFORE STARTING your installation
More informationSurface Mount Aluminum Electrolytic Capacitors
FETURES YLINDRIL V-HIP ONSTRUTION FOR SURFE MOUNTING REDUED SIZE VILLE WITH NTI-VIRTION TERMINTIONS (8 & 10mm DIMETER) SUIT FOR HIGH TEMPERTURE REFLOW SOLDERING (UP TO 260 ) 2,000 HOUR LOD LIFE @ +105
More informationISO 9001 : Full Port Check Valves. Male NPT, Plain & Grooved End Lowest Pressure Drop. Maximizing the Flow
ISO 9001 : 2008 Full Port heck Valves Male NPT, Plain & Grooved End Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port heck
More information0.5mm and 1mm Pitch Connectors For FPC/FFC
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationClassic Update Series
Classic Update Series 62-65 Ford Fairlane and 62-63 Mercury Meteor end view of terminal START HERE! PLEASE READ THIS EFORE STARTING INSTALLATION! This wiring kit is designed for ease of installation. Please
More information