Low Mating Force how to order (military types)

Size: px
Start display at page:

Download "Low Mating Force how to order (military types)"

Transcription

1 how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 / X 1 ontacts per Row Tail Length Tail Finish IO onnectors Military Part Ordering Procedure Example part number M55302/ is shown as follows: ody Type Rows M55302 / ontacts per Row ontact Type/Finish ody Type/ontact Style /166 designates M-P (Mother oard, Printed ircuit oard Termination) /167 designates M-W (Mother oard, Wire-wrap ontacts) /168 designates P (Printed ircuit, 90 Printed ircuit oard Termination) /170 designates D (Daughter oard, 90 Printed ircuit oard Termination) Rows 2 Rows 3 Rows 4 Rows ontacts per Row ontact counts per row range from 10 to 100 (Only 2 digits permitted in this space; for 100 contacts per row, use 00) Tail Length M-P (P Termination)* X.300 ±.025 Y.145 ±.025 Z.113 ±.025 M-W** (Wire-wrap) Y.700 ±.025 Z.542 ±.025 ody Type /169 designates IO (Input/Output) (ontact type/finish is last digit IO part number - see list options below) Rows 2 Rows 3 Rows 4 Rows ontacts per Row ontact counts per row range from 10 to 100 (Only 2 digits permitted in this space; for 100 contacts per row, use 00) ontact Type/Finish 1 rimp contact Tin lead per MIL-P-81728, 50 to 70% tin,.0001 min. thick over copper 2 rimp contact Gold per MIL-G-45204, type II, grade, class 1 over copper 3 onnectors supplied less contacts 4 P contacts installed with.145 ±.025 stickout Tin lead per MIL-P-81728, 50 to 70% tin,.0001 min. thick over copper (Reference J Dimension on connector drawing on page 20). D* X.300 ±.025 Y.150 ±.025 Z.120 ±.025 Y.150 Z.095 P* * Reference J Dimension on all connector drawings in this catalog. ** For M-W only: Reference H Dimension on connector drawing on page 12. Tail Finish 1 Tin lead per MIL-P-81728, 50 to 70% tin,.0001 min. thick over copper 2 Gold per MIL-G-45204, type II, grade, class 00 (01 for M-W) over nickel per QQ-N-290 To Order IO ontacts (For use with connectors less contacts) M55302/171-1 suffix designates crimp well finish rimp well finish 1 rimp contact Tin lead per MIL-P-81728, 50 to 70% tin,.0001 min. thick over copper 2 rimp contact Gold per MIL-G-45204, type II, grade class 1 over copper To order ccessories, see page 7. 5

2 how to order (proprietary types) M, D, IO, P onnectors Proprietary Part Ordering Procedure Example part number M2-120P- ( ) is shown as follows: ody Type Rows Total ontacts Termination Style Variation Suffix ody Type M designates Mother oard D designates Daughter oard IO designates Input/Output P designates Printed ircuit Rows 2, 3 or 4 rows M P - ( ) Total ontacts See ontact rrangements, pages 8 and 9 Standard Termination Style (Stickout values below apply to J dimension referenced on individual connector catalog pages.) MX-XXXP MX-XXXW DX-XXXP IOX-XXX Straight P stud,.021 dia,.113 ±.025 stickout, Sn/Ni plate Solderless wrap,.025 sq.,.507 ±.025 stickout, Sn/Ni plate 90 P stud,.021 dia,.085 ±.025 stickout, Sn/Ni plate rimp, rear removable contact, size 22D wire well, Sn/Ni plate IOX-XXXP P stud,.021 dia,.145 ±.025 stickout, Sn/Ni plate PX-XXXP P stud,.021 dia, Sn/Ni plate stickout, LEGEND: Sn/Ni designates Tin over Nickel u/ni designates Gold over Nickel u/u designates Gold over opper SnPb/u designates Tin-Lead over opper Variation Suffix (Stickout values below apply to J dimension referenced on individual connector catalog pages.) (700) Gold plate in accordance with MIL-G-45204, type II, min. thick gold ( for solderless wrap) over min. thick nickel (standard termination length) (701) Gold plate in accordance with MIL-G-45204, type II, min. thick gold over min. thick copper (standard termination length) (702) P stud stickout.145, Sn/Ni plate, M-P (703) u/ni [same as (700)], P stud stickout.145, M-P (704) u/u [same as (701)], P stud stickout.145, M-P (705) 90 P stud,.120 stickout. Sn/Ni plate, D (706) u/ni [same as (700)], 90 P stud.120 stickout, D (707) u/u [same as (701)], 90 P.120 stickout, D (709) P stud stickout.300 D (90 ),.300 M-P &.335 IO-P, Sn/Ni plate (710) Solderless wrap,.025 sq.,.665 stickout, Sn/Ni plate, M-W (711) Solderless wrap,.025 sq.,.665 stickout, u/ni, [same as (700)], M-W (713) P stud stickout.060, Sn/Ni plate, IO-P (714) 90 P stud stickout.150, Sn/Ni plate, P & D (715) Solderless wrap,.025 sq.,.665 stickout, u/u [same as (701)], M-W (716) 90 P stud stickout.085 matte tin, D (717) 90 P stud stickout.095 matte tin, P (718) 90 P stud stickout.120 matte tin, D (719) P stud stickout.300 M-P &.335 IO-P, matte tin (720) P stud stickout.060 matte tin, IO-P (721) P stud stickout.500, Sn/Ni plate, IO-P (722) P stud stickout.356 matte tin, M-P (723) P stud stickout.192, Sn/Ni plate, M-P (724) 90 P stud stickout.095, RTV potted rear, Sn/Ni plate, P (725) 90 P stud stickout.120, RTV potted rear, Sn/Ni plate, D (726) 90 P stud stickout.150, RTV potted rear, Sn/Ni plate, P & D (727) P stud stickout.145, RTV potted rear, Sn/Ni plate, M-P (728) P stud stickout.145, u/ni, [same as (700)], RTV potted rear, M-P (729) 90 P stud stickout.120, u/ni, [same as (700)], RTV potted rear, D (730) 90 P stud stickout.150, u/ni, [same as (700) above], P and D (731) P stud stickout.145, matte tin, M-P Variation Suffixes continued on next page. 6

3 how to order (proprietary types)/accessories M, D, IO, P onnectors Proprietary Part Ordering Procedure Variation Suffix, cont. (732) P stud stickout.300 D (90 ),.300 M-P and.335 IO-P, u/u [same as (701)], (733) P stud stickout.421, matte tin, M-P (734) Solderless wrap.025 sq.;.665 stickout, u/ni, [same as (700)], RTV potted rear, M-W (735) RTV potted rear, standard termination length, u/ni, [same as (700)] (736) RTV potted rear, standard termination length, Sn/Ni [use (724) for P] (737) P stud stickout.300 D (90 ),.300 M-P and.335 IO-P, u/ni, [same as (700)], RTV potted rear (738) P stud stickout.192 SnPb/u (Mil-Spec), M-P (739) P stud stickout.300 D (90 ),.300 M-P and.335 IO-P;, RTV potted rear, Sn/Ni (740) Solderless wrap.025 sq.;.665 stickout, Sn/Ni, RTV potted rear, M-W (741) Solderless wrap.025 sq.;.280 stickout, u/ni, [same as (700)], M-W (742) P.145, u/ni, [same as (700)], epoxy potted rear, M-P (743) 90 P.120, u/ni, [same as (700)], epoxy potted rear, D (744) 90 P.120, u/ni, [same as (700)], (MIL-Spec), epoxy potted rear, D (746) 90 P.120, SnPb/u, (MIL-Spec), epoxy potted rear, D (747) P stud stickout.200, Sn/Ni, IO-P (748) P stud stickout.145, Sn/Ni, epoxy potted rear, M-P (749) P, epoxy potted rear, standard termination length, Sn/Ni (750) P stud stickout.172 termination, u/ni, [same as (700)], RTV potted rear, M-P (751) 90 P stud stickout.150, Sn/Ni, epoxy potted rear, P (752) u/ni, epoxy potted rear, standard termination length (753) Solderless wrap.025 sq.;.665 stickout, u/ni, [same as (700)], epoxy potted rear, M-W (754) P stud stickout.172 termination, SnPb/u (MIL- Spec), M-P (757) P stud,.391 stickout, matte tin, M-P (758) P stud,.172 stickout, u/ni, [same as (700)], epoxy potted rear, M-P (760) P stud,.192 stickout, u/ni (Mil-Spec), M-P (761) 90 P stud,.120 stickout, Sn/Ni, epoxy potted rear, D (762) P stud,.145 stickout, u/ni (Mil-Spec), epoxy potted rear, M-P (763) P stud,.145 stickout, SnPb/u (Mil-Spec), epoxy potted rear, M-P (764) 90 P stud,.150 stickout, SnPb/u (Mil-Spec), epoxy potted rear, D & P (765) P stud, stickout.300 D (90 ),.300 M-P, SnPb/ u (Mil-Spec), epoxy potted rear (766) 90 P stud,.120 stickout, u/ni (Mil-Spec), epoxy potted rear, D (767) P stud,.192 stickout, u/ni (Mil-Spec), epoxy potted rear, M-P (768) P stud,.172 stickout, u/ni (Mil-Spec), M-P (769) 90 P stud,.200 stickout, u/ni (Mil-Spec), D (770) 90 P stud,.260 stickout, u/ni (Mil-Spec), D ccessories mphenol Low Mating Force onnectors are shipped lessaccessory items. ccessories may be ordered by either military or proprietary part numbers shown below: ccessory Item Series Military Part Proprietary Part Qty. Required Polarization Keys M, D, IO, P M55302/ * Locking/Mounting ushing M M55302/ lternate Length ushing (Longer) M M55302/ Locking ushing P M55302/ Locking Screw, Plain IO M55302/ Locking Screw, Slotted IO Locking Screw, Slotted (Low Prile) IO M55302/ Test Probe Kit M, D, IO, P ** See pages for more detailed information on these accessory items. 7 * 4 Keys required per connector half, if used ** One kit per connector gender is recommended

4 contact arrangements ontacts ontacts are supplied with M, D, IO and P onnector Series assemblies as ordered. Replacement contacts are available; consult mphenol erospace for information. 2 ROW Front Mother oard onnector*, Rear Input/Output onnector, Front Printed ircuit onnector Rear 90 Daughter oard onnector, Daughter oard Hole Pattern at F Rear 90 Printed ircuit onnector, Hole Pattern at G.050 F PLES PLES.200 TYP PLES MOUNTING FETURE 2 PLES.100 MOUNTING FETURE 2 PLES.100 MOUNTING FETURE 2 PLES.100 G Total ontacts 2 ROW * See contact data table on individual connector drawing pages. See page 16 for effective termination length dimensions. Designates asic Dimension. onsult mphenol drawing for solderless wrap contact fixturing (datum) hole locations to facilitate connector alignment. 8

5 contact arrangements, cont. 3 ROW Front Mother oard onnector*, Rear Input/Output onnector, Front Printed ircuit onnector Rear 90 Daughter oard onnector, Daughter oard Hole Pattern at F Rear 90 Printed ircuit onnector, Hole Pattern at G F PLES PLES.200 TYP MOUNTING FETURE 2 PLES MOUNTING FETURE 2 PLES MOUNTING FETURE 2 PLES G 3 ROW Total ontacts PLES 4 ROW Front Mother oard onnector*, Rear Input/Output onnector, Front Printed ircuit onnector Rear 90 Daughter oard onnector, Daughter oard Hole Pattern at F Rear 90 Printed ircuit onnector, Hole Pattern at G.150 F D PLES D PLES.200 TYP D PLES MOUNTING FETURE 2 PLES MOUNTING FETURE 2 PLES.100 MOUNTING FETURE 2 PLES G 4 ROW Total ontacts Designates asic Dimension. onsult mphenol drawing for solderless wrap contact fixturing (datum) hole locations to facilitate connector alignment. 9

6 contact installation instructions, repair/replacement Individual contacts in the 3 Low Mating Force onnector line can be removed and replaced, thereby avoiding replacement the entire connector. TOOLS REQUIRED: M, P Series Tool* Insertion Tool* solder removal equipment IO Series M22520/2-01 rimp Tool Daniels Tool #K743 Positioner Removal Tool Insertion Tool ONTT REMOVL - D SERIES ontact removal is accomplished from the front or mating side this connector series without removing the entire connector from the printed circuit board. Determine which contact is to be removed from the connector and cut tail. Unsolder cut tail. Solder sucking may be necessary to clear the printed circuit board solder and cut tail. Pull the contact through the front side the connector with tweezers. are must be taken not to damage adjacent contacts. Discard the damaged contact. ONTT REPLEMENT/INSERTION - D SERIES Using tweezers or fingers, carefully place the replacement contact TIL FIRST into the appropriate contact cavity in the front the connector. efore final seating the contact make provisions for proper dressing the contact, since the 90 tail the D connector must be routed through its nest in the connector body molding and, in turn, into the printed circuit board hole. Push the contact into the cavity with a flat-edged rod.060 to.100 inch diameter until contact seats. Do not push against bristle wires or bend shroud. It may be necessary to simultaneously bend the contact tail during this step. Dress and resolder contact tail in proper location. ONTT REMOVL - M, P SERIES** ontact removal is accomplished from the front or mating side these connector series without removing the entire connector from the printed circuit board. Determine which contact is to be removed from the connector and unsolder or unwrap the contact tail as applicable. Tail cutting and/or solder sucking may be necessary to clear the printed circuit board. Inspect the damaged contact to determine if the bristle wires are bent in a particular direction within the contact cavity. The slot in the tube end the Extraction Tool is designed to accommodate these bent strands. Retract the plunger the Extraction Tool to its furthest point travel, and line up the slot in the tube end with any bent bristle wires in the contact cavity. Insert the tool into contact cavity. moderate amount resistance will be encountered until the contact retention tines are deflected, and then a positive stop will be felt. REMOVE DMGED ONTT INSERT EXTRTION TOOL WITH PLUNGER RETRTED * vailable from mphenol orporation, mphenol erospace, Sidney NY FSM ** Except for M with compliant contacts; consult mphenol, Sidney, NY for details EXTRTION TOOL ND INSERTION TOOL

7 contact installation instructions, repair/replacement Using the thumb, push the plunger portion the Extraction Tool through the holder body into the damaged contact until a slight resistance is felt. DO NOT PUSH PLUNGER HRD ENOUGH TO LOSE THE GP ETWEEN IT ND THE HOLDER ODY. The contact is now ready to be removed. While maintaining slight pressure on the plunger, withdraw tool and contact through the front the connector body. Discard damaged contact. ONTT REPLEMENT/INSERTION - M, P SERIES * Using tweezers or fingers, carefully place the replacement contact TIL FIRST into the appropriate contact cavity in the front the connector. Push contact tail into the cavity until the tail centers in the molded locating ribs. DO NOT push against the bristle wires. Position the tube end the Insertion Tool over the brush contact wires. e careful not to bend any bristle strands. efore final seating the contact it is necessary to make provisions for proper dressing the contact tail back into the printed circuit board hole. In the case a 90 tail situation, extra care must be taken to dress the contact as it is being seated. Push contact into cavity using the Insertion Tool until a positive stop is felt. Remove tool. ontact is now ready for termination. ONTT REMOVL - IO- SERIES ontact removal is accomplished from the rear this connector series. Determine which contact is to be removed and locate its corresponding wire in the wire bundle. Position wire in Removal Tool (white). Slide tool along wire and insert into rear connector body. moderate amount resistance will be encountered until the contact retention tines are deflected, and then a positive stop will be felt. Then, holding the wire in tension with the thumb against the tool serrations, withdraw tool, wire and contact in one steady motion. ut f and discard damaged contact. ONTT REPLEMENT/INSERTION - IO- SERIES Using accepted industry procedures, strip wire end to be terminated 1/8 to 5/32 inch. are should be taken not to nick wire strands. ssemble the M22520/2-01 rimp Tool and Daniels K743 Positioner and place Tool Selector in correct setting for wire size being used as follows: WG SEL Insert stripped wire end into contact wire well. Strands should be visible in wire well inspection hole. ottom contact and wire assembly in Positioner and close handles rimp Tool to complete crimp. Handles will not open unless full crimping cycle has been completed. Position crimped wire and contact in Insertion tool (brown). Snug insertion tip around contact. Insert contact and wire assembly into rear connector. Push tool gently forward until contact is fully seated. Withdraw tool and remove from wire. slight pull on the wire assures retention. Redress wire bundle. SET PLUNGER ND REMOVE ONTT ND TOOL SET ONTT WITH INSERTION TOOL * Except for M with compliant contacts; consult mphenol, Sidney, NY for details. 11 INSERT REPLEMENT ONTT

8 mother board connector MX PLES.010 M -D- -X- X D M MINUS.010 K.020 M G H J 4-40 UN-2 LOKING/MOUNTING USHING ( ) FOR MTING WITH INPUT/OUTPUT ONNETOR, ESSORY ITEM** (See page 29 and/or L-1220 for alternate mounting methods) UN ± ±.025 LTERNTE LENGTH ( ) MTES WITH D ND IO SERIES ONNETORS Notes: When mating with D connector, a total.035 inch minimum radial pilot is available for connector body alignment. ll dimensions for reference only. Polarization keys are not supplied as part M onnector Series assemblies. See How to Order, page 7 and further description, page 28. ** Not supplied as part M onnector Series assemblies. See How to Order, page 7. Designates asic Dimension onsult mphenol drawing for solderless wrap contact fixturing (datum) hole locations to facilitate connector alignment. Description Termination Style Letter ontact Data ontact Part H ±.020 J ±.020 K ±.002 Round P P Dia. Stud Solder P-(702) Dia. Termination P-(709) Dia. Square Solderless W Sq. Wrap Termination W-(710) Sq. NOTE: Other variations available - see pages 7 and 8, or consult Sidney, NY. 12

9 mother board connector 2 row contact arrangements ontacts M * G Min. 020 M2-020(*) M2-022(*) M2-024(*) M2-026(*) M2-028(*) M2-030(*) M2-032(*) M2-034(*) M2-036(*) M2-038(*) M2-040(*) M2-042(*) M2-044(*) M2-046(*) M2-048(*) M2-050(*) M2-052(*) M2-054(*) M2-056(*) M2-058(*) M2-060(*) M2-062(*) M2-064(*) M2-066(*) M2-068(*) M2-070(*) M2-072(*) M2-074(*) M2-076(*) M2-078(*) M2-080(*) M2-082(*) M2-084(*) M2-086(*) M2-088(*) M2-090(*) M2-092(*) M2-094(*) M2-096(*) M2-098(*) M2-100(*) M2-102(*) M2-104(*) M2-106(*) M2-108(*) M2-110(*) ontacts M * G Min. 112 M2-112(*) M2-114(*) M2-116(*) M2-118(*) M2-120(*) M2-122(*) M2-124(*) M2-126(*) M2-128(*) M2-130(*) M2-132(*) M2-134(*) M2-136(*) M2-138(*) M2-140(*) M2-142(*) M2-144(*) M2-146(*) M2-148(*) M2-150(*) M2-152(*) M2-154(*) M2-156(*) M2-158(*) M2-160(*) M2-162(*) M2-164(*) M2-166(*) M2-168(*) M2-170(*) M2-172(*) M2-174(*) M2-176(*) M2-178(*) M2-180(*) M2-182(*) M2-184(*) M2-186(*) M2-188(*) M2-190(*) M2-192(*) M2-194(*) M2-196(*) M2-198(*) M2-200(*)

10 mother board connector 3 row contact arrangements ontacts M * G Min. 030 M3-030(*) M3-033(*) M3-036(*) M3-039(*) M3-042(*) M3-045(*) M3-048(*) M3-051(*) M3-054(*) M3-057(*) M3-060(*) M3-063(*) M3-066(*) M3-069(*) M3-072(*) M3-075(*) M3-078(*) M3-081(*) M3-084(*) M3-087(*) M3-090(*) M3-093(*) M3-096(*) M3-099(*) M3-102(*) M3-105(*) M3-108(*) M3-111(*) M3-114(*) M3-117(*) M3-120(*) M3-123(*) M3-126(*) M3-129(*) M3-132(*) M3-135(*) M3-138(*) M3-141(*) M3-144(*) M3-147(*) M3-150(*) M3-153(*) M3-156(*) M3-159(*) M3-162(*) M3-165(*) ontacts M * G Min. 168 M3-168(*) M3-171(*) M3-174(*) M3-177(*) M3-180(*) M3-183(*) M3-186(*) M3-189(*) M3-192(*) M3-195(*) M3-198(*) M3-201(*) M3-204(*) M3-207(*) M3-210(*) M3-213(*) M3-216(*) M3-219(*) M3-222(*) M3-225(*) M3-228(*) M3-231(*) M3-234(*) M3-237(*) M3-240(*) M3-243(*) M3-246(*) M3-249(*) M3-252(*) M3-255(*) M3-258(*) M3-261(*) M3-264(*) M3-267(*) M3-270(*) M3-273(*) M3-276(*) M3-279(*) M3-282(*) M3-285(*) M3-288(*) M3-291(*) M3-294(*) M3-297(*) M3-300(*)

11 mother board connector 4 row contact arrangements ontacts M * G Min. 040 M4-040(*) M4-044(*) M4-048(*) M4-052(*) M4-056(*) M4-060(*) M4-064(*) M4-068(*) M4-072(*) M4-076(*) M4-080(*) M4-084(*) M4-088(*) M4-092(*) M4-096(*) M4-100(*) M4-104(*) M4-108(*) M4-112(*) M4-116(*) M4-120(*) M4-124(*) M4-128(*) M4-132(*) M4-136(*) M4-140(*) M4-144(*) M4-148(*) M4-152(*) M4-156(*) M4-160(*) M4-164(*) M4-168(*) M4-172(*) M4-176(*) M4-180(*) M4-184(*) M4-188(*) M4-192(*) M4-196(*) M4-200(*) M4-204(*) M4-208(*) M4-212(*) M4-216(*) M4-220(*) ontacts M * G Min. 224 M4-224(*) M4-228(*) M4-232(*) M4-236(*) M4-240(*) M4-244(*) M4-248(*) M4-252(*) M4-256(*) M4-260(*) M4-264(*) M4-268(*) M4-272(*) M4-276(*) M4-280(*) M4-284(*) M4-288(*) M4-292(*) M4-296(*) M4-300(*) M4-304(*) M4-308(*) M4-312(*) M4-316(*) M4-320(*) M4-324(*) M4-328(*) M4-332(*) M4-336(*) M4-340(*) M4-344(*) M4-348(*) M4-352(*) M4-356(*) M4-360(*) M4-364(*) M4-368(*) M4-372(*) M4-376(*) M4-380(*) M4-384(*) M4-388(*) M4-392(*) M4-396(*) M4-400(*)

12 daughter board connector DI. 2 SIDES.010 M -D-.115 H.285 ±.005 Y D M MINUS.010 K.020 M J -Y REF x.075 DEEP 2 PLES (FOR HEX NUT.187 MX. ROSS FLTS,.205 MIN. ROSS ORNERS) H ± ENTER OF ROW ONTTS MTES WITH M ND P SERIES ONNETORS Notes: When mating with M or P connector, a total.035 inch minimum radial pilot is available for connector body alignment. ll dimensions for reference only. Polarization keys are not supplied as part D onnector Series assemblies. See How to Order, page 7 and further description, page 28. Designates asic Dimension Description Termination Style Letter ontact Data rrangement Row ontact Part J ±.020 K ±.002 P Dia. P Dia. P Dia. P D Dia. Round P P-(705) Dia. Stud, 90 P-(705) Dia. Solder P-(705) Dia. Termination P-(705) D Dia. P-(709) Dia. P-(709) Dia. P-(709) Dia. P-(709) D Dia. NOTE: Other variations available - see pages 7 and 8, or consult Sidney, NY. 16

13 daughter board connector 2 row contact arrangements ontacts D * H 020 D2-020P D2-022P D2-024P D2-026P D2-028P D2-030P D2-032P D2-034P D2-036P D2-038P D2-040P D2-042P D2-044P D2-046P D2-048P D2-050P D2-052P D2-054P D2-056P D2-058P D2-060P D2-062P D2-064P D2-066P D2-068P D2-070P D2-072P D2-074P D2-076P D2-078P D2-080P D2-082P D2-084P D2-086P D2-088P D2-090P D2-092P D2-094P D2-096P D2-098P D2-100P D2-102P D2-104P D2-106P D2-108P D2-110P ontacts D * H 112 D2-112P D2-114P D2-116P D2-118P D2-120P D2-122P D2-124P D2-126P D2-128P D2-130P D2-132P D2-134P D2-136P D2-138P D2-140P D2-142P D2-144P D2-146P D2-148P D2-150P D2-152P D2-154P D2-156P D2-158P D2-160P D2-162P D2-164P D2-166P D2-168P D2-170P D2-172P D2-174P D2-176P D2-178P D2-180P D2-182P D2-184P D2-186P D2-188P D2-190P D2-192P D2-194P D2-196P D2-198P D2-200P

14 daughter board connector 3 row contact arrangements ontacts D * H 030 D3-030P D3-033P D3-036P D3-039P D3-042P D3-045P D3-048P D3-051P D3-054P D3-057P D3-060P D3-063P D3-066P D3-069P D3-072P D3-075P D3-078P D3-081P D3-084P D3-087P D3-090P D3-093P D3-096P D3-099P D3-102P D3-105P D3-108P D3-111P D3-114P D3-117P D3-120P D3-123P D3-126P D3-129P D3-132P D3-135P D3-138P D3-141P D3-144P D3-147P D3-150P D3-153P D3-156P D3-159P D3-162P D3-165P ontacts D * H 168 D3-168P D3-171P D3-174P D3-177P D3-180P D3-183P D3-186P D3-189P D3-192P D3-195P D3-198P D3-201P D3-204P D3-207P D3-210P D3-213P D3-216P D3-219P D3-222P D3-225P D3-228P D3-231P D3-234P D3-237P D3-240P D3-243P D3-246P D3-249P D3-252P D3-255P D3-258P D3-261P D3-264P D3-267P D3-270P D3-273P D3-276P D3-279P D3-282P D3-285P D3-288P D3-291P D3-294P D3-397P D3-300P

15 daughter board connector 4 row contact arrangements ontacts D * H 040 D4-040P D4-044P D4-048P D4-052P D4-056P D4-060P D4-064P D4-068P D4-072P D4-076P D4-080P D4-084P D4-088P D4-092P D4-096P D4-100P D4-104P D4-108P D4-112P D4-116P D4-120P D4-124P D4-128P D4-132P D4-136P D4-140P D4-144P D4-148P D4-152P D4-156P D4-160P D4-164P D4-168P D4-172P D4-176P D4-180P D4-184P D4-188P D4-192P D4-196P D4-200P D4-204P D4-208P D4-212P D4-216P D4-220P ontacts D * H 224 D4-224P D4-228P D4-232P D4-236P D4-240P D4-244P D4-248P D4-252P D4-256P D4-260P D4-264P D4-268P D4-272P D4-276P D4-280P D4-284P D4-288P D4-292P D4-296P D4-300P D4-304P D4-308P D4-312P D4-316P D4-320P D4-324P D4-328P D4-332P D4-336P D4-340P D4-344P D4-348P D4-352P D4-356P D4-360P D4-364P D4-368P D4-372P D4-376P D4-380P D4-384P D4-388P D4-392P D4-396P D4-400P

16 input/output connector.540 MX..670 MX. K J 4-40 UN MX. UNMTED FREE LENGTH.650 MX. WHEN FULLY SSEMLED TO MTING ONNETOR LOKING SREW ESSORY ITEM**.220 DI..445 MX. UNMTED FREE LENGTH.31 MX. WHEN FULLY SSEMLED TO MTING ONNETOR LOKING SREW ESSORY ITEM**.220 DI. MTES WITH M ND P SERIES ONNETORS Notes: When mating with M or P connector, a total.022 inch minimum radial pilot is available for connector body alignment. ll dimensions for reference only. rimp contact (tin plate), wire well size 22D, supplied with IO onnector Series assemblies. Optional noble metal termination plating available. See How to Order, page 8. Polarization keys are not supplied as part IO onnector Series assemblies. See How to Order, page 7 and further description, page 28. ** Locking Screws are not supplied as part IO onnector Series assemblies. See How to Order, page 7 and further description, page 29. Description Termination Style Letter ontact Data ontact Part J ±.020 K ±.002 Rear Removable rimp ontact N/ N/ Round P P Stud Solder P-(713) Termination P-(709) NOTE: Other variations available - see pages 7 and 8, or consult Sidney, NY. 20

17 input/output connector 2 row contact arrangements ontacts IO * 020 IO2-020(*) IO2-022(*) IO2-024(*) IO2-026(*) IO2-028(*) IO2-030(*) IO2-032(*) IO2-034(*) IO2-036(*) IO2-038(*) IO2-040(*) IO2-042(*) IO2-044(*) IO2-046(*) IO2-048(*) IO2-050(*) IO2-052(*) IO2-054(*) IO2-056(*) IO2-058(*) IO2-060(*) IO2-062(*) IO2-064(*) IO2-066(*) IO2-068(*) IO2-070(*) IO2-072(*) IO2-074(*) IO2-076(*) IO2-078(*) IO2-080(*) IO2-082(*) IO2-084(*) IO2-086(*) IO2-088(*) IO2-090(*) IO2-092(*) IO2-094(*) IO2-096(*) IO2-098(*) IO2-100(*) IO2-102(*) IO2-104(*) IO2-106(*) IO2-108(*) IO2-110(*) ontacts IO * 112 IO2-112(*) IO2-114(*) IO2-116(*) IO2-118(*) IO2-120(*) IO2-122(*) IO2-124(*) IO2-126(*) IO2-128(*) IO2-130(*) IO2-132(*) IO2-134(*) IO2-136(*) IO2-138(*) IO2-140(*) IO2-142(*) IO2-144(*) IO2-146(*) IO2-148(*) IO2-150(*) IO2-152(*) IO2-154(*) IO2-156(*) IO2-158)*) IO2-160(*) IO2-162(*) IO2-164(*) IO2-166(*) IO2-168(*) IO2-170(*) IO2-172(*) IO2-174(*) IO2-176(*) IO2-178(*) IO2-180(*) IO2-182(*) IO2-184(*) IO2-186(*) IO2-188(*) IO2-190(*) IO2-192(*) IO2-194(*) IO2-196(*) IO2-198(*) IO2-200(*)

18 input/output connector 3 row contact arrangements ontacts IO * 030 IO3-030(*) IO3-033(*) IO3-036(*) IO3-039(*) IO3-042(*) IO3-045(*) IO3-048(*) IO3-051(*) IO3-054(*) IO3-057(*) IO3-060(*) IO3-063(*) IO3-066(*) IO3-069(*) IO3-072(*) IO3-075(*) IO3-078(*) IO3-081(*) IO3-084(*) IO3-087(*) IO3-090(*) IO3-093(*) IO3-096(*) IO3-099(*) IO3-102(*) IO3-105(*) IO3-108(*) IO3-111(*) IO3-114(*) IO3-117(*) IO3-120(*) IO3-123(*) IO3-126(*) IO3-129(*) IO3-132(*) IO3-135(*) IO3-138(*) IO3-141(*) IO3-144(*) IO3-147(*) IO3-150(*) IO3-153(*) IO3-156(*) IO3-159(*) IO3-162(*) IO3-165(*) ontacts IO * 168 IO3-168(*) IO3-171(*) IO3-174(*) IO3-177(*) IO3-180(*) IO3-183(*) IO3-186(*) IO3-189(*) IO3-192(*) IO3-195(*) IO3-198(*) IO3-201(*) IO3-204(*) IO3-207(*) IO3-210(*) IO3-213(*) IO3-216(*) IO3-219(*) IO3-222(*) IO3-225(*) IO3-228(*) IO3-231(*) IO3-234(*) IO3-237(*) IO3-240(*) IO3-243(*) IO3-246(*) IO3-249(*) IO3-252(*) IO3-255(*) IO3-258(*) IO3-261(*) IO3-264(*) IO3-267(*) IO3-270(*) IO3-273(*) IO3-276(*) IO3-279(*) IO3-282(*) IO3-285(*) IO3-288(*) IO3-291(*) IO3-294(*) IO3-297(*) IO3-300(*)

19 input/output connector 4 row contact arrangements ontacts IO * 040 IO4-040(*) IO4-044(*) IO4-048(*) IO4-052(*) IO4-056(*) IO4-060(*) IO4-064(*) IO4-068(*) IO4-072(*) IO4-076(*) IO4-080(*) IO4-084(*) IO4-088(*) IO4-092(*) IO4-096(*) IO4-100(*) IO4-104(*) IO4-108(*) IO4-112(*) IO4-116(*) IO4-120(*) IO4-124(*) IO4-128(*) IO4-132(*) IO4-136(*) IO4-140(*) IO4-144(*) IO4-148(*) IO4-152(*) IO4-156(*) IO4-160(*) IO4-164(*) IO4-168(*) IO4-172(*) IO4-176(*) IO4-180(*) IO4-184(*) IO4-188(*) IO4-192(*) IO4-196(*) IO4-200(*) IO4-204(*) IO4-208(*) IO4-212(*) IO4-216(*) IO4-220(*) ontacts IO * 224 IO4-224(*) IO4-228(*) IO4-232(*) IO4-236(*) IO4-240(*) IO4-244(*) IO4-248(*) IO4-252(*) IO4-256(*) IO4-260(*) IO4-264(*) IO4-268(*) IO4-272(*) IO4-276(*) IO4-280(*) IO4-284(*) IO4-288(*) IO4-292(*) IO4-296(*) IO4-300(*) IO4-304(*) IO4-308(*) IO4-312(*) IO4-316(*) IO4-320(*) IO4-324(*) IO4-328(*) IO4-332(*) IO4-336(*) IO4-340(*) IO4-344(*) IO4-348(*) IO4-352(*) IO4-356(*) IO4-360(*) IO4-364(*) IO4.368(*) IO4-372(*) IO4-376(*) IO4-380(*) IO4-384(*) IO4-388(*) IO4-392(*) IO4-396(*) IO4-400(*)

20 P connector ±.020 J -Y-.193 MX..021 ±.002 DI. Y Z M MINUS M UN-2 LOKING USHING FOR MTING WITH INPUT/ OUTPUT ONNETOR, ESSORY ITEM ** X.012 M -Z USE #4 MOUNTING SREW.105 MTES WITH D ND IO SERIES ONNETORS Notes: When mating with D connector, a total.035 inch minimum radial pilot is available for connector body alignment. ll dimensions for reference only. Polarization keys are not supplied as part P onnector Series assemblies. See How to Order, page 7 and further description, page 28. ** Not supplied as part P onnector Series assembles. See How to Order, page 7, and further description, page 29. Designates asic Dimension Description Round P Stud, 90 Solder Termination Termination Style Letter ontact Data rrangement Row ontact Part J P P P P D P-(714) P-(714) P-(714) P-(714) D NOTE: Other variations available - see pages 7 and 8, or consult Sidney, NY. 24

M300 Connectors Introduction

M300 Connectors Introduction ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male

More information

The Centi Line -.075" Contact Spacing

The Centi Line -.075 Contact Spacing The enti Line -.075" ontact Spacing The annon enti connectors are especially suitable for commercial applications such as computers, instrumentation, communications and audio equipment. They are available

More information

M40-600/620 Connectors Specification

M40-600/620 Connectors Specification M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage

More information

Gecko Connectors Introduction

Gecko Connectors Introduction Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability

More information

Dynamic Series Connectors

Dynamic Series Connectors 3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,

More information

2M Series Contacts and Tools

2M Series Contacts and Tools Crimp Type AMPS #23 #20HD #20 #16 #12 AWG Part Number Color Band 1st 2nd 3rd #22-#28 2M809-001 N/A N/A N/A #26-#30 2M809-042* Blue N/A N/A 5 Socket #22-#28 2M809-002 N/A N/A N/A Socket #26-#30 2M809-043*

More information

Gecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.

Gecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical. onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts

More information

MIL-C-5015 Bulkhead Receptacles

MIL-C-5015 Bulkhead Receptacles I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient

More information

17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA

17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA 17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors

More information

How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE

How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use

More information

Microminiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.

Microminiature. Micro Edgeboard -.050 Contact Spacing MEB. Specifications. How to Order. ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne

More information

Micro-D Printed Circuit Board Connectors

Micro-D Printed Circuit Board Connectors PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the

More information

DSUBMINIATURE CONNECTOR J SERIES

DSUBMINIATURE CONNECTOR J SERIES D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping

More information

Amphenol Heavy Duty Cylindrical Connectors

Amphenol Heavy Duty Cylindrical Connectors mphenol Heavy Duty ylindrical onnectors 12-052-9 mphenol mphenol Heavy Duty ylindrical onnectors MIL--22992/Proprietary High urrent apacity Rugged onstruction Safety Serviceability mphenol meets the demands

More information

MIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors

MIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,

More information

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20

More information

Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors

Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing

More information

PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch

PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch New Product XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated

More information

MMC RTX series EN3716

MMC RTX series EN3716 MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products

More information

connectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE

connectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE connectors range Special OMMIL SU-MINITU Standard HIGH POMN SU-MINITU LXIL N ST SSMLY SU-MINITU High ensity INS NSITY SU-MINITU ccessories onnectors Special OMMIL SU-MINITU Special range of connectors

More information

VG95328 Qualified Bayonet-Lock Connectors

VG95328 Qualified Bayonet-Lock Connectors Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving

More information

Specifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0.

Specifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0. 05 rimp Type onnectors For Mating To Mate With ss y Pitch onnectors Wire to oard onnectors connectors are miniature type connectors which were developed with concepts for versatile usage for P.. board

More information

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated

More information

DSUBMINIATURE CONNECTOR J SERIES

DSUBMINIATURE CONNECTOR J SERIES D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses

More information

8060 Series Alternate Action and Momentary Pushbutton Switches

8060 Series Alternate Action and Momentary Pushbutton Switches lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available

More information

Micro-D TwistPin Connectors and Accessories Product Selection Guide

Micro-D TwistPin Connectors and Accessories Product Selection Guide Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and

More information

Kulka Military Class (A-A-59125) / (MIL-T-55164*)

Kulka Military Class (A-A-59125) / (MIL-T-55164*) (--59125) / (MIL-T-55164*) Military Class: Closed ack Supercedes MIL-T-59125 These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting

More information

MIL-DTL-83723, Series III, Matrix

MIL-DTL-83723, Series III, Matrix MIL-DTL-, Series III, TBLE OF CONTENTS FOR SECTION MIL-DTL-, SERIES III, MTRIX Wide Variety of Coupling Styles & Options... Class Descriptions, Performance Specifications, Quick Reference Chart.... Insert

More information

MIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1

MIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1 MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications

More information

PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch

PCB Terminal Blocks: Push-in SMT Terminals with 2.54mm Pitch XW4H/XW4K/XW4 P Terminal locks: Push-in SMT Terminals with mm Pitch Push-in Terminals to Easily omplete onnections. P Terminal locks with mm Pitch. Push-in connection method allows repeated repairs. Hold-down

More information

2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)

2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed) 2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive

More information

PCB layouts. High Density D only. 50 way 50 way DIMENSIONS. 15 way High Density D 26 way High Density D. 62 way High Density D. 44 way High Density D

PCB layouts. High Density D only. 50 way 50 way DIMENSIONS. 15 way High Density D 26 way High Density D. 62 way High Density D. 44 way High Density D Straight p.c. - way 0º p.c. - way P layouts 2.84 S 2 Ø 0.76 min. S 2 Ø 0.76 min. Plug viewed from above, socket viewed from below. 2 holes at Ø 3.2 min. (2 holes at Ø 3.0/3. boardlock only)* ONT 2 holes

More information

305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing

305/315/355 SERIES CARD EDGE CONNECTOR.156 (3.96mm) Contact Spacing 305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style

More information

STRATO-THERM Terminals and Splices for High Temperature Applications

STRATO-THERM Terminals and Splices for High Temperature Applications atalog 1308940 Introduction Product Facts Product available in temperature ranges of 500 F [260 ], 550 F [288 ], 650 F [343 ] and 1200 F [649 ] Product employs the famous and crimp ide range of wire sizes

More information

Connectors Conforming to European Safety Standards

Connectors Conforming to European Safety Standards Series RoS ompliant onnectors onforming to European Safety Standards s of January 1995 all industrial machinery, including machine tools, which are exported to Europe must conform with European safety

More information

8060 Series Alternate Action and Momentary Pushbutton Switches

8060 Series Alternate Action and Momentary Pushbutton Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers

More information

Features and Application

Features and Application MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact

More information

0.5mm and 1mm Pitch FPC/FFC Connectors

0.5mm and 1mm Pitch FPC/FFC Connectors 0.5mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear

More information

3.3 mm Contact Pitch, Connectors for Internal Power Supplies

3.3 mm Contact Pitch, Connectors for Internal Power Supplies . mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5

More information

Electrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II

Electrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

C&K 8060 Series Alternate Action and Momentary Pushbutton Switches

C&K 8060 Series Alternate Action and Momentary Pushbutton Switches lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break

More information

Table of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class

Table of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3

More information

Rack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS

Rack & Panel. Miniature Rectangular / #16 Contacts /.062 Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current

More information

Catalog C-001 Rev. G

Catalog C-001 Rev. G atalog -001 Rev. G Experience Founded in 1966 Involvement in the development of international connector specifi cations through EI, IE and ISO as well as PIMG. Introduction of new and unique connector

More information

Card Edge Connectors Catalog Issued 7-03

Card Edge Connectors Catalog Issued 7-03 Catalog 1654080 Issued 7-03 Introduction This catalog contains product descriptions of MP Card Edge Connectors. These connectors are presented in three groups: Solder Type Board-to- Board, Press-fit Board-to-

More information

MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction

MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The

More information

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors

More information

Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors

Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated

More information

Amphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors

Amphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors mphenol - everse ayonet oupling onnectors 12-027-1 he Industrial onnector for actory utomation, obotics, rocess ontrol and est & easurement quipment. mphenol able of ontents age o. mphenol - everse ayonet

More information

0.5 mm and 1 mm Pitch FPC/FFC Connectors

0.5 mm and 1 mm Pitch FPC/FFC Connectors 0.5 mm and mm Pitch FP/FF onnectors FH Series Features. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and works with a light force.. lear tactile click clear

More information

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2. IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL

More information

RA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.

RA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2. IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST

More information

FOR BOARD-TO-CABLE CONNECTION

FOR BOARD-TO-CABLE CONNECTION FOR OR-TO-LE ONNETION 230 SERIES (GENERL-PURPOSE TYPE) ISONTINUE FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 80 are available for

More information

MAGNET WIRE TERMINALS AND TERMINATION SYSTEMS MAG-MATE terminals, SIAMEZE terminals, AMPLIVAR terminals and splices, and cluster blocks

MAGNET WIRE TERMINALS AND TERMINATION SYSTEMS MAG-MATE terminals, SIAMEZE terminals, AMPLIVAR terminals and splices, and cluster blocks PPINCES /// MGNET WIRE TERMINTION MGNET WIRE TERMINS ND TERMINTION SYSTEMS MG-MTE terminals, SIMEZE terminals, MPIVR terminals and splices, and cluster blocks Table of Contents Standard MG-MTE Terminals

More information

Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch

Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height

More information

ca_b1-b66.qxd:layout 1 2/9/11 7:58 PM Page 1 Mini Circular

ca_b1-b66.qxd:layout 1 2/9/11 7:58 PM Page 1 Mini Circular Microminiatuare ircular -.050" ontact pacing MIO- MIO- microminiature circular connectors are rugged yet lightweight - and meet or exceed the applicable requirements of MI- T-8353. pplications include

More information

POWER TRIPLE LOCK* Connector System

POWER TRIPLE LOCK* Connector System POWER TRIPLE LOCK* Connector System Application Specification 114-106118 23 MAY 18 Rev J NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.

More information

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2. IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R

More information

AMPLIMITE.050 Series Cable Assemblies, Series III

AMPLIMITE.050 Series Cable Assemblies, Series III Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements

More information

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050) pitch ribbon cables IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC

More information

SMA CONTENTS PAGE 9-3

SMA CONTENTS PAGE 9-3 CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15

More information

8020 Series Snap-acting Momentary Pushbutton Switches

8020 Series Snap-acting Momentary Pushbutton Switches Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant

More information

341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing

341/391 SERIES CARD EDGE CONNECTOR.100 (2.54mm) Contact Spacing 341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options

More information

8D Series D38999 Aluminum Series

8D Series D38999 Aluminum Series onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle

More information

HPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION

HPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:

More information

KA Series. MIL-DTL Compliant PCB connectors

KA Series. MIL-DTL Compliant PCB connectors MIL-DTL-55302 Compliant connectors Hypertac Hyperboloid Technology Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac (HYPERboloid

More information

FILTER D-SUB. connectors

FILTER D-SUB. connectors FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High

More information

Amphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.

Amphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors. mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,

More information

PCB Single Row Connectors

PCB Single Row Connectors SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors

More information

6LGH High Voltage Connectors

6LGH High Voltage Connectors LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387

More information

FAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 Rev E

FAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 Rev E Application Specification 114-13069 FAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters

More information

F-Series General Specifications

F-Series General Specifications arling F-Series General Specifications F-Series breakers are available up to 700, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method

More information

MS/Standard DL-Class Pre-Earth type

MS/Standard DL-Class Pre-Earth type MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety

More information

C&K 8020 Series Snap-acting Momentary Pushbutton Switches

C&K 8020 Series Snap-acting Momentary Pushbutton Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications

More information

MODULAR TELEPHONE JACKS

MODULAR TELEPHONE JACKS dam Technologies, Inc. MODULR TELEPHONE JKS INTRODUTION: dam Tech MTJ series Modular Telephone Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules

More information

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) 7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent

More information

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) 7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent

More information

MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708

MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708 FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to

More information

IMPACT Backplane Connector System

IMPACT Backplane Connector System IMPT ackplane onnector System isclaimer While T has made every reasonable effort to ensure the accuracy of the information in this catalog, T does not guarantee that it is error-free, nor does T make any

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant

More information

RWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors

RWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.

More information

Economy Power (EP) 2.5 Contacts; Plug and Receptacle Housings; and Vertical and Right-Angle Headers

Economy Power (EP) 2.5 Contacts; Plug and Receptacle Housings; and Vertical and Right-Angle Headers Economy Power (EP) 2.5 Contacts; Plug and s; and Vertical and Right-Angle Headers Application Specification 114-13315 09 JUN 17 Rev G NOTE All numerical values are in metric units [with U.S. customary

More information

PART NUMBER BREAKDOWN

PART NUMBER BREAKDOWN SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options

More information

Rack & Panel Rectangular Miniature Subminiature Environmental Removable Contacts

Rack & Panel Rectangular Miniature Subminiature Environmental Removable Contacts Rack & Panel Rectangular Miniature Subminiature Environmental Removable ontacts Table Of ontents Series Description Page MR Miniature Rectangular onnectors With Removable ontacts 2-10 X External Miniature

More information

7000 Series Miniature Rocker & Lever Handle Switches

7000 Series Miniature Rocker & Lever Handle Switches Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant

More information

Butt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount

Butt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount utt ontact Series 30 and 46 Snap-in Panel Mount TURS Sleek lack Matte ezel onvenient Snap-In ront Mount hoice of 6 utton olors SPST, SPT or PT ircuitry lternate ction, Positive eel and Overtravel Versions

More information

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available

More information

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors

More information

JUL 14 Rev B

JUL 14 Rev B Power Triple Lock (PTL) Connector System Application Specification 4-068 2 JUL 4 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.

More information

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.

More information

Wall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.

Wall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31. L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting

More information

2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools

2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools 2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...

More information

MIL Class M Series D*M D*MA connectors and crimp contacts

MIL Class M Series D*M D*MA connectors and crimp contacts eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic

More information

MIL-DTL-83723, Series III, Pyle

MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS Table of Contents....................... 37 Design Features, Customer Options, Manufacturer s Specifications. 38, 39 Quick Reference of Choices - Threaded Styles......... 40-42 Quick Reference

More information