1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors

Transcription

1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Overview Industry and market accepted as De facto standard for LCD panel connections (panels under inches). High-performance connectors for LVDS high-speed differential signals. Features. Small configuration and board space Thin design accepts discrete wire, thin micro-coaxial cable (Ø.5mm, Ø.6mm max.) and FPC.7mm maximum thick.. Common use of receptacle The same receptacle will accept plugs terminated with discrete wire, FPC or micro-coaxial cable. 3. Uniform external dimensions The plug assembly external dimensions remain the same when is terminated with discrete wire, FPC or micro-coaxial cable. 4. Variety of mounting styles Device design engineers have a choice of mounting styles : topboard, offset, reverse mount offset and vertical. 5. Ground connection Metal grounding plates connect with the common ground line. 6. Glow wire compliance (Compliant with IEC6695--) pplications LCD connections in small consumer devices : digital cameras, notebook computers, PD s. ny device requiring high-density interconnection for consistent high speed transmission data rates. FPC (.7) Horizontal mounting (.78) Micro-coaxial cable (7.7) Top-board mounting Offset mounting Reverse, offset mounting DF9G-*P-H(54) DF9G-*S-F(5) DF9G-*S-F-GND(5).5±. (.7) Discrete wire DF9G-*S-C(5) (7.7) DF9-*P-V(56).3±. DF9G-*S-SD(5) +DF9G-*S-SD-GND DF9-*P-V(56).65 PCB Vertical mounting Discrete wire FPC FPC Plug Receptacle DF9 Micro-coaxial cable Micro-coaxial cable Twisted pair cable FPC Vertical mounting Notebook PC DF9 DF9 DF9 B53

2 Product s Rating Current rating Voltage rating 8 WG : 3 WG :.9 3 WG :.8 36 WG :.5 FPC :.5 Micro-coaxial cable 4 WG :.3 V C Operating temperature range Operating humidity range -35ç to 85ç Note -35ç to 85ç Note -% to 8% Storage temperature range Storage humidity range -ç to 6ç Note -4% to 7% Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Item Conditions.Insulation resistance.withstanding voltage 3.Contact resistance 4.Insertion-Extraction force (per contact) 5.Vibration 5Mø min. No flashover or insulation breakdown. 3mø max. (5mø max. for FPC) Min..N, Max. 3N No electrical discontinuity of μs or more. V DC 3 V C / one minute m Measured with a steel pin Ø.±.5 Frequency : to 55 Hz, single amplitude of.75mm, hours in each of the 3 directions. 6.Humidity (Steady state) Materials / Finish Contact resistance : 3mø max. (5mø max. for FPC) Insulation resistance : 5Mø min. 7.Temperature cycle Contact resistance : 3mø max. (5mø max. for FPC) Insulation resistance : 5Mø min. 8.Durability (insertion/ withdrawal) Contact resistance : 3mø max. (5mø max. for FPC) 9.Resistance to soldering heat No deformation of the insulator parts affecting performance. Receptacle Plug Crimp contact Plug for PPC Grounding plate for PPC Plug for micro-coaxial cable 96 hours at temperature of 4±ç and humidity of 9% to 95% Temperature : 55ç +5ç to +35ç +85ç +5ç to +35ç Time (Minutes) : cycles 3 cycles Re-flow soldering : t the recommended temperature profile Manual soldering : Soldering iron temperature 3ç, 3 seconds Note : Includes temperature rise caused by current flow. Note : The term storage refers to connectors stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Product Component Material Finish/Color Grounding plate for micro-coaxial cable Insulator Contacts Grounding plate Insulator Tin-lead plated Contact Insulator Contact Grounding plate Insulator Contact Grounding plate Grounding plate Polyamide Polyamide Stainless steel Polyamide Stainless steel LCP Black or Beige Gold plated Tin plated or Tin-copper plated Beige Tin-copper plated Gold Plated Beige Gold plated Tin-copper plated Beige Gold plated Tin plated Tin plated Remarks UL94V- UL94V- UL94V- B54

3 Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Connector DF9 # - * P - H DF9 # - * S - F - GND Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Series Name : DF9 3 Number of contacts : 8,,,3 (Note ) Configuration Receptacle 4 Connector type S : Plug G : Top-board mounting (.65mm high) P : Receptacle K : Offset mounting (.mm high) 5 Contact pitch : mm L : Offset mounting (.mm high) 6 Mounting type/termination type KR : Reverse offset mounting version of H : Horizontal SMT DF9K (.mm high) V : Vertical SMT C : Plug discrete wire (crimp contact) Plug for discrete wire F : Plug FPC Blank : No grounding plate SD : Plug micro-coaxial cable G : With grounding plate 7 dditional separate component Plug for FPC GND : Ground plate (Note ) G : With grounding plate Grounding plate for FPC G : With grounding plate Plug for micro-coaxial cable G : With grounding plate Grounding plate for micro-coaxial cable G : With grounding plate Note : Number of contacts will differ depending on the connector style. Note : Grounding plates are required when terminating with the FPC and micro-coaxial cable. Contact DF9-83 SCF (* *) 3 4 Conductor size 83 : 8 to 3 WG 33 : 3 to 3 WG 36 : 36 WG Contact type SCF : Plug contact, tape and reel packaging 3 4 Plating : Gold Packaging Blank :, pcs/reel (4) :, pcs/reel B55

4 Right angle receptacle, top-board mounting.375 B.75 P= Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved..45 BPCB mounting pattern +..5± ±. B±.5.65±.. +. P=±.5 Outline of the receptacle.65.55±.5 C No conductive traces (54) : Tape & reel packaging (, pcs/reel) Part No. HRS No. No. of contacts B C Remarks RoHS DF9G-8P-H (54) DF9G-P-H (54) DF9G-P-H (54) mm high DF9G-3P-H (54) Note : Order by number of reels. B56

5 Right angle receptacle, offset mounting.375 B.75 P=.5.45 Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. BPCB mounting pattern 3.75±. B±.5.975±. 5.5± Outline of the plug P=±.5.55±.5 Outline of the receptacle D E± F DF9K identification indicator C ±. (.) 6.7 F (54) : Tape & reel packaging (, pcs/reel) Part No. HRS No. No. of contacts B C D E F Remarks RoHS DF9K-P-H (54) mm high DF9K-3P-H (54) Part No. HRS No. No. of contacts B C D E F Remarks RoHS DF9L-P-H (54) DF9L-P-H (54) DF9L-3P-H (54) mm high Note : Order by number of reels. B57

6 Right angle receptacle, reverse offset mounting.375 B.75 P= Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved..45 BPCB mounting pattern 5.5± ±. B±.5.975± P=±.5.55±.5 Outline of the plug Outline of the receptacle D E±..46 C ±. (.) 6.7 (54) : Tape & reel packaging (, pcs/reel) Part No. HRS No. No. of contacts B C D E Remarks RoHS DF9KR-P-H (54) mm high DF9KR-P-H (54) Note : Order by number of reels. B58

7 Vertical receptacle..56 BPCB mounting pattern P=.5.95 B.3 Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved ± ±.5 Outline of the plus.65± D±.5 P=±.5.55±.5 (E) G± (F) C.± Conductive traces in this area must be covered by dielectric compound. (56) : Tape & reel packaging (, pcs/reel) Part No. HRS No. No. of contacts B C D E DF9-P-V (56) DF9-P-V (56) Note : Order by number of reels. F G RoHS 3 9 B59

8 Plug (Discrete wire) DF9-*S-C P= B DF9G-*S-C(5) B P= Contact No. 5 and multiples indicator.5 Contact No. 5 and multiples indicator.5 Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Shown with terminated and installed contacts Note: Order by number of bags. Crimp contacts Part No. HRS No. Packaging Quantity Finish RoHS DF9-83SCF (* *) ** See s DF9-33SCF (* *) ** Tape & reel Gold plated number below DF9-3336SCF (* *) ** pplicable cable (Tin plated annealed conductor) Wire size (stranded wire conductor) 8 WG (7/.7mm) 3 WG (7/.mm) 3 WG (7/.8mm) 36 WG (7/.5mm) pplicable UL style UL57(thin type) (Note) Jacket diameter.5mm to.6mm.7mm Carrier strip Note : When using other than the recommended wire, contact your Hirose sales representative. Note : Contact your Hirose sales representative when using 36 WG. Tools Strip length.mm to.9mm No. of contacts indicator Part No. HRS No. No. of contacts B RoHS Part No. HRS No. No. of contacts B RoHS DF9-8S-C DF9G -8S-C(5) DF9 -S-C DF9G -S-C(5) DF9 -S-C DF9G -S-C(5) DF9-3S-C DF9G -3S-C(5) number * *(* *) Blank : Tape & reel packaging (, pcs/reel) (4) : Tape & reel packaging (, pcs/reel) Blank,(5) : Bag packaging ( pcs/pack) t=.5 Part pplicator Press unit Part No. P5-DF9S CM-5C HRS No Note : Use of other than Hirose Electric approved tools will void the product warranties. Note : Contact Hirose for the wire striping, contact crimp and contact insertion instructions. Note 3 : Please do the crimping operations according to the "Crimping quality standard" and "Crimping condition table". B6

9 Plug (Flat Printed Circuit) Note: Socket and grounding plate is required. P= B C 5.95 CV No.. Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Shown terminated with FPC D±.8.45±.3.3±.5 C±.5 t=.5±.3 P=±.3.7±.3.35±.5 R. MXR. MXR..4±.5.35±.3 E±.5 Signal area <.85±.5 ±.5 (.35) Ground plate for FPC 4. B No. of contacts indicator SIGNL C D Part No. HRS No. No. of contacts B C D E RoHS DF9G-S-F(5) DF9G-S-F(5) DF9G-3S-F(5) Note : Order by number of bags. 3.6.±.5.±.5.±..5.5 R. R.±.5.3±.5 : to 5μm thick solder plated> Ground area < : to 5μm thick solder plated>.5 Polarizing mark indicator (5) : Bag packaging ( pcs/pack) Part No. HRS No. No. of contacts B C D RoHS DF9G-S-F-GND(5) DF9G-S-F-GND(5) DF9G-3S-F-GND(5) Note : Order by number of bags. Grounding plate installation tools (5) : Bag packaging ( pcs/pack) Type Part No. HRS No. Desktop tool (for pos.) Desktop tool (for pos.) Desktop tool (for 3 pos.) DF9G-S/PR-MD DF9G-S/PR-MD DF9G-3S/PR-MD Note : Product is not guaranteed unless Hirose approved tools are used. B6

10 Plug (Micro-coaxial cable) B P= 6. 3±..7±.5.9MX.33 C±. D±.5 P=±. Inner conductor Insulator Grounding bar Solder coat.min Outer conductor Jacket Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Shown terminated with micro-coaxial cable Part No. HRS No. No. of contacts B C D RoHS DF9G-S-SD(5) DF9G-S-SD(5) Note : Order by number of bags. pplicable cable (Micro-coaxial cable) Wire size (stranded wire center conductor) Jacket diameter 4 WG (7/.3mm).3mm to.4mm Grounding plate for micro-coaxial cable Cable preparation Note : Connectors are designed to allow termination without cutting of the pitch loss prevention tape. Note : Required Solder coating for inner conductor. Note 3 : When using -conductor micro-coaxial cable some contact positions will not be used. Contact your Hirose sales representative. (5) : Bag packaging ( pcs/pack) Part No. DF9G-S-SD-GND DF9G-S-SD-GND HRS No Blank : Bag packaging ( pcs/pack) No. of contacts RoHS B6

11 BEmbossed Carrier Tape Dimensions Receptacles DF9G-*P-H(54) DF9K-*P-H(54) DF9L -*P-H(54) Ø.5 +. ±. ±. 4±. G.75±. C±. B±. ±.3 G-G.75±.5 t=.3±±. D±.3 ±.5 Part number label Depth of.5 diameter Ø3 Ø8 Ø33 Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. DF9KR-*P-H(54) Ø.5 +. (.3) H.5±.5.85±.5 (.3) H H-H H G Unreeling direction 7.8±.3 Connector No. of contacts B C D E F Remarks DF9G-8P-H(54) DF9G-P-H(54) DF9G-P-H(54) DF9G-3P-H(54) DF9K-P-H(54) DF9K-3P-H(54) DF9L-P-H(54) DF9L-P-H(54) DF9L-3P-H(54) Top-board mounting (.65mm high) Offset mounting (.mm high) Offset mounting (.mm high) ±. H-H H G.75±. C±. B±. ±.3 G Unreeling direction G-G.75±.5 t=.3±. D±.3 Ø ±.5 Part number label Ø E + F Ø.5 in the rear Ø3 E + F 7.8±.3 Connector No. of contacts B C D E F Remarks DF9KR-P-H(54) Reverse type of DF9K DF9KR-P-H(54) Offset mounting (.mm high) Ø8 Ø33 DF9-*P-V(56) Ø ±. ±. 4±..75±. H 3.7±. H G 4±. G C±. B±. ±.3 D±. t=.4±. Unreeling direction ±.5 Part number label Ø Depth of.5 diameter Connector No. of contacts B C D E F Remarks DF9-P-V(56) Vertical receptacle DF9-P-H(56) Ø3 + E+ F Ø8 Ø38± B63

12 BUse recommendations. Recommendedtemperature profile Temperature(ç) 5ç ç 8 Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved.. Manual soldering 3. Screen thickness 4. Board warpage 5. Cleaning conditions 6. Termination conditions 7. Cautions 8. Precautions 5ç ç 5ç Preheating soldering 6 to (S) 5ç (s)max ç min 6(s)max Note : Up to cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note : The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. Note 3 : The product can be used without trouble though the surface of a grounding plate might discolor. TIME(S) Manual soldering : 9±ç for 3 seconds.5mm Maximum of.3mm at the connector center, with both ends of the connector as reference points. Refer to Wire-to-Board Connector Use Handbook. Refer to Wire-to-Board Connector Use Handbook. Do not twist when mating/un-mating. Refer to Wire-to-Board Connector Use Handbook. B64

13 Powered by TCPDF ( DF9 Series mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors BPlug (FPC Type) Termination Procedures (Dedicated ssembly Tooling is required.) Insert the FPC diagonally from the top surface of the grounding plate. Step Pass the FPC through the grounding plate. fter passing through, lower the FPC (as shown) to horizontal position. Step Signal surface Ground surface Feb..8 Copyright 8 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Step 3 Step 4 Final completion Extend the FPC out and fully insert into the socket. Exercising caution slide the grounding plate forward and pre-insert it over the socket. ssembly point: Slightly raise the FPC to an angle of about 3 degrees, and then insert the grounding plate over the socket..7 Using the dedicated installation tool, insert the grounding plate. Note : The grounding plate and the plug are supplied as separate components. Note : Dedicated assembly fixtures are required at each stage of the termination process. For detail, refer to the instruction manual supplied with the tools. Note 3 : Do not apply excessive forces to FPC (Bending or twisting) as it may introduce cracks in the copper foil (on the cover film edge). Note 4 : To protect the FPC, insertion and disconnection of the connectors should be performed parallel to the mating direction. Note 5 : Do not apply excessive tension to FPC. Note 6 : Refer to FPC manufacturer for bend radius and other specific recommendation. Distance should be allowed for the bending position, as illustrated below. SIGNL MIN MIN 5 Note 7 : Follow the instruction manuals for the termination and assembly fixtures and tools. B65