DSUBMINIATURE CONNECTOR J SERIES

Transcription

1 D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses to obtain the advantages of cold working. They are therefore highly elastic, which in turn ensures reliable connection even after many mating cycles. The dimples in the plug shell ensure continuity between it and the receptacle shell, thus providing complete shielding. osts are kept low by selective gold plating the contacts. The solder cup portions of the contacts are tin-plated for easy soldering. Insulator housings are made of a heat-resistant glass-filled PT resin. Specifications Materials Model number identification onnector Part name ontact Material and Finish rass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated J E Z P 12 Plug Insulator Glass-filled PT, UL4V-0, black Shell Mild steel, copper-undercoated, tin-plated Series name Receptacle ontact Insulator Shell Phosphor bronze, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated Glass-filled PT, UL4V-0, black Mild steel, copper-undercoated, tin-plated Shell size: E,,, Wire connection style: Z... Solder pot type haracteristics urrent rating Voltage rating Temperature range ontact resistance Insulation resistance Withstanding voltage Note: ontact JST for details ,, D (2 for 37-circuits) 0V, D -40 to +85 (including temperature rise in applying electrical current) Initial value/15mω max. fter environmental testing/30mω max. 5,000MΩ min. 1,000V /minute Number of circuits:, 15,, 37 onnector style: P... Plug, S... Receptacle Finish lank... Gold-plated (flash) micron(8micro-inch) gold-plated micron(16micro-inch) gold-plated micron(30micro-inch) gold-plated 0... Tin-plated Note: 1. The relationship between number of circuits and shell size is shown below. : E,15:, :, 37: 2. ontact JST for special plating requirements.

2 Plug 3.05(.120)dia. 2.84(.112) 8.35(.32) 12.55(.44) [5.5(.234)] [10.8(.4)] ircuits Dimensions mm(in.) Gold-plated Tin-plated JEZ- P JEZ- P (.666) 24.(.84) 30.81(1.213) JZ-15P JZ-15P-0.(.4) 33.32(1.321) 3.14(1.541) JZ-P JZ-P (1.534) 47.04(1.852) 53.04(2.088) JZ-37P JZ-37P (2.182) 63.50(2.500) 6.32(2.72) Q ty / box Receptacle 3.05(.120)dia. 2.84(.112) 7.(.311) 12.55(.44) 6.18 (.243) [10.(.42)] ircuits Dimensions mm(in.) Gold-plated Tin-plated JEZ- S JEZ- S (.643) 24.(.84) 30.81(1.213) JZ-15S JZ-15S (.71) 33.32(1.312) 3.14(1.541) JZ-S JZ-S (1.511) 47.04(1.852) 53.04(2.088) JZ-37S JZ-37S (2.15) 63.50(2.500) 6.32(2.72) Q ty / box

3 D-sub J DSUMINITURE ONNETOR J SERIES Right angle through-hole plug and receptacle RIGHT NGLE THROUGH-HOLE PLUG ND REEPTLE Right angle through-hole plug (with hexagonal lock screw blocks) Right angle through-hole receptacle (with rectangular lock screw blocks) Right angle through-hole receptacle (with spring lock devices) Features The receptacle contacts are made by high-speed stamping presses. This promotes the uniform elasticity of the twin-contact mating sections and therefore ensures reliable contact even after repeated mating cycles. The solder tails are U-shaped for extra strength. osts are minimized by selective gold plating, high speed stamping presses, and completely automated assembly. To ensure complete shielding, a wide variety of grounding adapters are available so that the receptacles can be grounded to different kinds of supporting structures. Metric, inch or other lock screw blocks are available for fastening mating plugs. 6

4 Specifications Materials haracteristics ontact of plug Part name ontact of receptacle Insulator Shell Hexagonal lock screw block Rectangular lock screw block Grounding adapter having a 3.2mm(.126") dia. hole Grounding adapter having an M3 tapped hole Material and Finish rass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated Phosphor bronze, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated Glass-filled PT, UL4V-0, black Mild steel, copper-undercoated, nickel-plated Mild steel, copper-undercoated, nickel-plated Zinc, copper-undercoated, nickel-plated Mild steel, copper-undercoated, nickel-plated urrent rating Voltage rating Temperature range ontact resistance Insulation resistance Withstanding voltage pplicable P board thickness Note: ontact JST for details. 3.0,, D 0V, D -40 to +85 (including temperature rise in applying electrical current) Initial value/15mω max. fter environmental testing/30mω max. 5,000MΩ min. 1,000V /minute 1.6mm(.063) Grounding adapter having a spring lock lever rass, copper-undercoated, tin-plated Model number identification J E Y S S1 Series name Shell size: E,,, Wire connection style: Y... Right angle through-hole style Number of circuits:, 15,, 37 onnector style: P... Plug, S... Receptacle onnector construction/dimensions: Standard J series Types of grouding adapters 0... With no grounding adapters 1... s having a 3.2mm(.126") dia. hole 2... s having a M3 thread 3... s having a spring lock device (1) 4... s having a spring lock device (2) Types of lock screw blocks... With hexagonal lock screw blocks having a No UN inch thread... With hexagonal lock screw blocks having a M2.6 thread... With rectangular lock screw blocks having a M2.6 thread D... With no lock screw block E... With no lock screw block, and grounding adapter having a 3.05mm(.120") dia. hole F... With no lock screw block, and grounding adapter having a No. 4-40UN inch thread G... With no lock screw block, and grounding adapter having an M2.6 thread H... With no lock screw block, and grounding adapter having an M3 thread Finish lank... Gold-plated (flash) micron(8micro-inch) gold-plated micron(16micro-inch) gold-plated micron(30micro-inch) gold-plated 0... Tin-plated Spring lock devices lank... With no spring lock devices S or S1... With spring lock devices Note: 1. The relationship between number of circuits and shell size is shown below. : E, 15:, :, 37: 2. ontact JST for special plating requirements. 3. ontact JST for the Receptacle with spring lock devices.(not UL recognized nor S certified.) 7

5 Right angle through-hole plug Type Type H D 2.84 (.112) 2.84 (.112) 8.35(.32) 12.55(.44) (.028) (.234) E [18.6(.732)] 3.2 (.126) H: Height of the lock screw block (for Types, & ) ircuits Dimensions mm(in.) gold-plated plug tin-plated plug D 15 JEY- P-1** JY-15P-1** JY-P-1** JEY- P-1**0 JY-15P-1**0 JY-P-1**0 16.2(.666) 24.(.84) 30.81(1.213).(.4) 33.32(1.312) 3.14(1.541) 38.7(1.534) 47.04(1.852) 53.04(2.088) 8.1(.31) 8.1(.31) 8.2(.323) 0.6 (.024) Q'ty / box Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a -circuit gold-plated plug with hexagonal lock screw blocks having a No.4-40UN inch thread and without grounding adapter is required, specify the model number as JEY-P-10. E.52(.375).52(.375).62(.37) With hexagonal lock screw blocks having a No.4-40UN inch thread With hexagonal lock screw blocks having a M2.6 thread No.4-40UN M2.6 Without grounding adapter 0 0 with a 3.2mm (.126") dia. hole 1 1 with a M3 thread 2 2 with a spring lock device (1) 3 3 with a spring lock device (2) 8

6 Type Type D Type E Type F Type G Type H With rectangular lock screw blocks (H: 6.2mm (.244")) having a M2.6 threads With no lock screw block, and a bolt/ nut Without lock screw blocks E: Grounding adapter has no thread. F, G, H: Grounding adapter has threads (*1) for securing a separately-purchased lock screw block (*2) Used a lock screw block [model number JFS-( )S-1N] *1: No.4-40UN inch thread JFS-4S-( )1W(M) *1: M2.6 thread *1: M3 thread JFS-2.6S-( )1W(M) JFS-3S-( )1W(M) M mm (.120")dia. hole (0D only) 3.05mm (.120")dia. hole No.4-40UN M2.6 M3 0 0D 1 1D 1E 1F 1G 2 2D 2E 2F 2G 3 3D 3E 3F 3G 4H

7 Right angle through-hole receptacle Type Type H D 2.84 (.112) 2.84 (.112) 7.(.311) 12.55(.44) 0.7 (.028) 6.18 (.243) E [18.8(.740)] 3.2 (.126) H: Height of the lock screw block (for Types, & ) Dimensions mm(in.) ircuits gold-plated tin-plated receptacle receptacle D JEY- S-1** JY-15S-1** JY-S-1** JY-37S-1** JEY- S-1**0 JY-15S-1**0 JY-S-1**0 JY-37S-1** (.643) 24.67(.71) 38.38(1.511) 54.84(2.154) 24.(.84) 30.81(1.213) 33.32(1.312) 3.14(1.541) 47.04(1.852) 53.04(2.088) 63.50(2.500) 6.32(2.72) 8.1(.31) 8.1(.31) 8.2(.323) 8.2(.323) 0.6 (.024) Q'ty / box Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a -circuit gold-plated plug with hexagonal lock screw blocks having a No.4-40UN inch thread and without grounding adapter is required, specify the model number as JEY-S-10. E.52(.375).52(.375).62(.37).62(.37) With hexagonal lock screw blocks having a No.4-40UN inch thread No.4-40UN With hexagonal lock screw blocks having a M2.6 thread M2.6 Without grounding adapter 0 0 with a 3.2mm (.126") dia. hole 1 1 with an M3 thread 2 2 with a spring lock device (1) 3 3 with a spring lock device (2) 10

8 Type Type D Type E Type F Type G Type H With rectangular lock screw blocks (H: 6.2mm (.244")) having a M2.6 threads With no lock screw block, and a bolt/ nut Without lock screw blocks E: Grounding adapter has no thread. F, G, H: Grounding adapter has threads (*1) for securing a separately-purchased lock screw block (*2) Used a lock screw block [model number JFS-( )S-1N] *1: No.4-40UN inch thread JFS-4S-( )1W(M) *1: M2.6 thread *1: M3 thread JFS-2.6S-( )1W(M) JFS-3S-( )1W(M) M mm (.120")dia. hole (0D only) 3.05mm (.120")dia. hole No.4-40UN M2.6 M3 0 0D 1 1D 1E 1F 1G 2 2D 2E 2F 2G 3 3D 3E 3F 3G 4H 11

9 P board layout (viewed from component side) ( circuits) (15 circuits) (.03 )dia ± 0.05 (.120 ±.002)dia ± 0.05(.108 ±.002) 5.4 ± 0.05 (.216 ±.002) 1.37 ± 0.05 (0.54 ±.002) 4.11 ± 0.05 (.162 ±.002) 24. ± 0.05(.84 ±.002) 2.84 ± 0.05 (.112 ±.002).0(.354) max. P board edge (.03 0 )dia ± 0.1 (.126 ±.004)dia ± 0.05(.054 ± ± 0.05 (.378 ±.002) 4.11 ± ± 0.05(.270 ±.002) (.162 ±.002) 2.74 ± 0.05 (.108 ±.002) 5.4 ± 0.05 (.216 ±.002) ± 0.15(1.312 ±.006) 8.23 ± 0.05(.324 ±.002) 2.84 ± 0.05 (.112 ± 0.05).0(.354) Max. P board edge ( circuits) (37 circuits) (.03 0 )dia ± 0.05 (.120 ±.002)dia ± 0.05 (.10 ±.002) 6.1 ± 0.05(.272 ±.002).68 ± 0.05(.381 ±.002) ± 0.05(.48 ±.002) 15.1 ± 0.05(.58 ±.002) ± 0.05(.652 ±.002) ± 0.05(.544 ±.002) ± 0.05(.435 ±.002) 8.28 ± 0.05(.326 ±.002) 5.54 ± 0.05(.218 ±.002) 1.40 ± 0.05(.055 ±.002) 4.14 ± 0.05 (.163 ±.002) ± 0.05(1.852 ±.002) 2.84 ± 0.05 (.112 ±.002) (.03 )dia ± 0.1 (.126 ±.004)dia ± 0.05(.78 ±.002) ± 0.05(.870 ±.002) 1.33 ± 0.05(.761 ±.002) ± 0.05(.652 ±.002) ± 0.05(.544 ±.002) ± 0.05(.435 ±.002) 8.28 ± 0.05(.326 ±.002) 2.77 ± ± 0.05(.218 ±.002) (.10 ±.002) 1.40 ± 0.05 (.055 ±.002) 4.14 ± 0.05 (.163 ±.002) 6.1 ± 0.05(.272 ±.002).68 ± 0.05(.381 ±.002) ± 0.05(.48 ±.002) 15.1 ± 0.05(.58 ±.002) 17.6 ± 0.05(.707 ±.002) ± 0.05(.815 ±.002) ± 0.05(.24 ±.002) ± 0.15(2.500 ±.006) 2.84 ± 0.05 (.112 ±.002).0(.354) Max. P board edge Panel layout Mounting on the rear side Mounting on the front side ± 0.1 (.126 ±.004)dia (.063)R The connector can be mounted either on the front side or on the rear side of the panel as shown above. Use M2.5 or M2.6 screws for installation. 12 ircuits ± 0.15(±.006) ± 0.2(±.008) ± 0.2(±.008) (.84) 33.32(1.312) 47.04(1.852) 63.50(2.500) 20.6(.811) 28.8(1.134) 42.6(1.677) 5.0(2.323) 12.0(.472) 12.0(.472) 12.0(.472) 12.0(.472)

10 D-sub J DSUMINITURE ONNETOR J SERIES Straight through-hole plug and receptacle STRIGHT THROUGH-HOLE PLUG ND REEPTLE Straight through-hole plug (with hexagonal lock screw blocs) Straight through-hole receptacle (with no lock screw block, and a grounding adapter having a No.4-40UN inch thread) Features Three standard types are available with different dimensions between the flange and solder tail: 6mm (.236"), mm (.354"), and 12mm (.472"). The roots of the contact leads are covered to prevent flux from rising into the connector during soldering. grounding adapter with a spring lock device allows the connector to be temporarily secured onto the printed circuit board so that the connector can be soldered easily (.472).0 (.354) 6.0 (.236) 13

11 Specifications Materials haracteristics ontact Part name Plug Receptacle Insulator Shell Heaxagonal lock screw bock Grounding adapter with spring lock device Material and Finish rass, nickel-undercoated, selective gold-plated Phosphor bronze, nickel-undercoated, selective gold-plated Glass-filled PT, UL4V-0, black Mild steel, copper-undercoated, nickel-plated Mild steel, copper-undercoated, nickel-plated rass, copper-undercoated, tin-plated urrent rating Voltage rating Temperature range ontact resistance Insulation resistance Withstanding voltage pplicable P board thickness *ontact JST for details. 3.0, D 0V, D -40 to +85 (including temperature rise in applying electrical current) Initial value/15mω max. fter environmental testing/30mω max. 5,000MΩmin. 1,000V /minute 1.6mm(.063") Straight through-hole plug with a spring lock device 2.84(.112) 8.35(.32) H: Height of the lock screw block (for Types, & J) ircuits Dimension between flange and solder tail mm(in.) 6 (.236) (.354) 12 (.472) 6 (.236) (.354) 12 (.472) Gold-plated (flash) Plug JES- P-2** JES- P-3** JES- P-4** JS-P-2** JS-P-3** JS-P-4** 12.55(.44) H D (.138)(.106) 0.5(.020) (.230) (.236) (.126) [15.04(.52)] Gold-plated 0.76micron(30micro-inch) JES- P-2**14 JES- P-3**14 JES- P-4**14 JS-P-2**14 JS-P-3**14 JS-P-4** (.112) 7.6(.300) H 5.84 (.230) D 3.5 (.138).0 (.354) [18.04(.710)] 2.7 (.106) 3.2 (.126) 12.0 (.472) 6 mm (.236") type mm (.354") type 12mm (.472") type H 5.84 (.230) D 16.0 (.665) 38.7 (1.534) Dimensions mm (in.) 24. (.84) (1.852) 30.8 (1.213) 53.0 (2.087) 2.4 (.04) 2.5 (.08) D (.138)(.106) [21.04(.828)] Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a gold-plated (flash) receptacle with hexagonal lock screw blocks having a No. 4-40UN inch thread and without grounding adapter whose dimension between flange and solder tail is 6mm(.236") is required, specify the model number as JS-P (.126) Q'ty / box 40 With hexagonal lock screw blocks having a No.4-40UN inch thread No.4-40UN Type 3 14

12 Model number identification Series name Shell size:, E Wire connection type: S... Straight through-hole type Number of circuits:, J S P 2 3 F 14 S1 onnector type: P... Plug S... Receptacle onnector construction/dimensions: mm (.236") from flange to solder tail 3... mm (.354") from flange to solder tail mm (.472") from flange to solder tail Types of grouding adapter: 3... Grounding adapter with a spring lock device Types of lock screw block:... With hexagonal lock screw blocks having a No. 4-40UN inch thread... With hexagonal lock screw blocks having a M2.6 thread F... With no lock screw block, and grounding adapters having a No.4-40UN inch thread G... With no lock screw block, and grounding adapters having a M2.6 thread H... With no lock screw block, and grounding adapter having a M3 thread J... With hexagonal lock screw block having a M3 thread Finish lank... Gold-plated(flash) micron(8micro-inch)gold-plated micron(16micro-inch)gold-plated micron(30micro-inch)gold-plated Spring lock devices lank... With no spring lock devices S or S1... With spring lock devices Note: 1. In the J Series, the number of circuits is determined by the shell size: circuits for E and circuits for. 2. ontact JST for special plating requirements. 3. ontact JST for the dimensions between the flange and solder tail other than those listed above. 4. Grounding adapters that can secure printed circuit boards are also available. 5. ontact JST for the Receptacle with spring lock devices.(not UL recognized nor S certified.) Type Type F Type G Type H Type J With hexagonal lock screw blocks (H: 6.3mm(.248")) having a M2.6 thread Without lock screw blocks F, G, H: Grounding adapter has threads (*1) for securing a separatelypurchased lock screw block (*2) *1: No.4-40UN inch thread SFS-4S-( )1W(M) *1: M2.6 thread SFS-2.6S-( )1W(M) *1: M3 thread SFS-3S-( )1W(M) With hexagonal lock screw block having an M3 thread M2.6 No.4-40UN M2.6 M3 M3 3 3F 3G 3H 3J 15

13 Straight through-hole receptacle ircuits with a spring lock device Dimension between flange and solder tail mm(in.) 2.84(.112) 7.(.311) H: Height of the lock screw block (for Types, & J) 6(.236) (.354) 12(.472) 6(.236) (.354) 12(.472) 12.55(.44) Gold-plated (flash) receptacle JES- S-2** JES- S-3** JES- S-4** JS-S-2** JS-S-3** JS-S-4** H D 2.7 (.106) 0.5(.020) (.243) (.236) (.126) [15.38(.606)] 2.84(.112) Gold-plated 0.76micron(30micro-inch) JES- S-2**14 JES- S-3**14 JES- S-4**14 JS-S-2**14 JS-S-3**14 JS-S-4**14 7.6(.300) H D 2.7 (.106) (.236) (.236) (.243).0(.354) (.126) (.243) 12.0(.472) [18.38(.724)] [21.38(.724)] 2.7 (.106) 6 mm (.236") type mm (.354") type 12mm (.472") type H Dimensions mm(in.) D (.643) (1.511) 24. (.84) (1.852) 30.8 (1.213) (2.088) Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a gold-plated (flash) receptacle with hexagonal lock screw blocks having a No. 4-40UN inch thread and without grounding adapter whose dimension between flange and solder tail is 6mm(.236") is required, specify the model number as JES-S-23. D 2.4 (.04) 2.5 (.08) Q'ty / box 3.2 (.126) 40 Type With hexagonal lock screw blocks having a No.4-40UN inch thread No.4-40UN 3 P board layout (-circuits) (- circuits) (.03 )dia ± 0.05(.108 ±.002) 5.4 ± 0.05 (.216 ±.002) 2.84 ± 0.05 (.112 ±.002) (.03 0 )dia ± 0.05 (.10 ±.002) ± 0.05(.652 ±.002) ± 0.05(.544 ±.002) ± 0.05(.435 ±.002) 8.28 ± 0.05(.326 ±.002) 5.54 ± 0.05(.218 ±.002) 2.84 ± 0.05 (.112 ±.002) 3.05 ± 0.05 (.120 ±.002)dia ± 0.05 (0.54 ±.002) 4.11 ± 0.05 (.162 ±.002) 24. ± 0.05(.84 ±.002).0(.354) max. P board edge 3.05 ± 0.05 (.120 ±.002)dia. 6.1 ± 0.05(.272 ±.002).68 ± 0.05(.381 ±.002) ± 0.05(.48 ±.002) 15.1 ± 0.05(.58 ±.002) 1.40 ± 0.05(.055 ±.002) 4.14 ± 0.05 (.163 ±.002) ± 0.05(1.852 ±.002) 16

14 Type Type F Type G Type H Type J With hexagonal lock screw blocks having a M2.6 thread Without lock screw blocks F, G, H: Grounding adapter has threads (*1) for securing a separatelypurchased lock screw block (*2) *1: No.4-40UN inch thread SFS-4S-( )1W(M) *1: M2.6 thread SFS-2.6S-( )1W(M) *1: M3 thread SFS-3S-( )1W(M) With hexagonal lock screw blocks having a M3 thread M2.6 No.4-40UN M2.6 M3 M3 3 3F 3G 3H 3J Panel layout ± 0.1 (.126 ±.004)dia (.063)R ircuits ± 0.15(±.008) ± 0.2(±.008) ± 0.2(±.008) 24.(.84) 20.6(.811) 12.0(.472) 47.04(1.852) 42.6(1.677) 12.0(.472) 17

15 D-sub J DSUMINITURE ONNETOR J SERIES rimp style plug and receptacle RIMP STYLE PLUG ND REEPTLE Pin contact rimp style plug Socket contact rimp style receptacle Features The contacts of this plug are formed by high-speed stamping presses into continuous strips that can be automatically fed into our compact crimping machines. Much less time is required to assemble RT and RS-232 round cables using this plug than when soldering connections. The contacts in this connector are selectively gold-plated. Moreover, JST's advanced technological knowledge and experience are fully utilized to significantly reduce production costs. The dimples in the connector shell provide the ground connection and are important factors in preventing electromagnetic interference. The contact has a lance that can be visually checked during assembly. This assures accurate assembly and reduces defects. Specifications Materials Model number identification onnector Plug Part name Pin contact Insulator Material and Finish rass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated Glass-filled PT, UL4V-0, black ontact J Series name S P Product shape: S... hain,... Loose piece Type of contact: P... Pin contact, S... Socket contact 18 Receptacle Shell haracteristics urrent rating Voltage rating Temperature range ontact resistance Socket contact Insulator Shell Insulation resistance Withstanding voltage Note: ontact JST for details. Mild steel, copper-undercoated, tin-plated Phosphor bronze, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated Glass-filled PT, UL4-0, black Mild steel, copper-undercoated, tin-plated 3.0,, D (2 for 37-circuits)(WG #20) 0V, D -40 to +85 (including temperature rise in applying electrical current) Initial value/15mω max. fter environmental testing/30mω max. 5,000MΩ min. 1,000V /minute pplicable wire: 1... WG #24-#20, 2... WG #28-#24 Material: 1... rass, 3... Phosphor bronze Finish Gold-plated (flash) micron(8micro-inch) gold-plated micron(16micro-inch)gold-plated micron(30micro-inch) gold-plated 0... Tin-plated Note: ontact JST for special plating requirements. Housing Series name J E P Shell size: E,,, Wire connection style:... crimp style Number of circuits:, 15,, 37 onnector style: P... Plug, S... Receptacle Note: The relationship between number of circuits and shell size is shown below. : E, 15:, :, 37: Note: The relationship between number of circuits and shell size is shown below. : E, 15:, :, 37:

16 Pin contact (for plug housing) Socket contact (for receptacle housing) 16.3(.642) 15.3(.602) 1.0(.03) 1.(.075) 5.8(.228) 3.6(.142) 1.4(.055) 1.(.075) 4.(.167) 3.6(.142) Pin contact Socket contact Gold-plated Tin-plated Gold-plated *J-SP1140 *J-SP110 *J-SS1340 J-SP2140 J-SP210 J-SS2340 WG # #24 to #20 #28 to #24 pplicable wire lnsulation O.D. mm(in.) 1.1 to1.8mm(.043" to.071") 0. to1.3mm(.035" to.051") Q ty / reel 10,000 Note: Models marked * are not S certified. Plug housing Receptacle housing 3.05 (.120)dia. [10.7(.421)] 3.05 (.120)dia. [10.7(.421)] 2.84(.112) 8.35(.32) 12.55(.44) 5.5 (.234) [10.8(.4)] 7.1(.280) 2.84(.112) 7.(.311) 12.55(.44) 6.18 (.243) [10.(.42)] 7.1(.280) ircuits Dimensions mm(in.) Q ty / box ircuits Dimensions mm(in.) Q ty / box JE- P J-15P J-P J-37P 16.2(.666).(.4) 38.7(1.534) 55.43(2.182) 24.(.84) 33.32(1.312) 47.04(1.852) 63.50(2.500) 30.81(1.213) 3.14(1.541) 53.04(2.088) 6.32(2.72) JE- S J-15S J-S 16.34(.643) 24.67(.71) 38.38(1.511) 24.(.84) 33.32(1.312) 47.04(1.852) 30.81(1.213) 3.14(1.541) 53.04(2.088) 50 1