MIL-DTL Nano D-sub Conectors

Size: px

Start display at page:

Download "MIL-DTL Nano D-sub Conectors"

Erin Elliott
6 years ago
Views:

1 reliable requirement, it can meet light and miniaturize demand mated connector locked by screw and nut Standard: MIL-TL-339 The sectional area of crimp conductive cable is.35mm Undefined tolerance is±.3 Specification Environment: -55 ~+5 Vibration: Hz~Hz 96m/s Shock: 9m/s 6ms MIL-TL-339 Nano -sub onectors 6 rimp ontact rief introduction ontacts:9,5,,5,3,37,5,65,69 Twist flexible micro pin (twist pin),.635mm pitch, micro miniature outline dimension Screw nut locking, it is gently when insert and extract, stably locked It is used for all kinds for electric circuit system interconnection which have high density, micro, light, highly Plug with twist pin, receptacle with socket, free terminal with locking screw, fixed terminal with nut, standard ontact layout ontact resistance: mω Insulation resistance: 5MΩ V ielectric strength: 5V ated current: Machine life: times andom vibration: power spectrum density.4g /Hz, r.m.s value of total acceleration 3.G emarked: The above layout is view from plug mate side end face sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35

2 How to order PI -TH ontact row: two rows nickel plating ontact plating: gold plating Tail termination type : crimp free mounted vertical mounted 3 horizontal mounted 4 crimp siamese 5 nut mounted 6 Flange mounted 7 Floating mounted ontact number: ontact type PI pin in plug H socket in receptacle PP plug interconnect plug PS plug interconnect receptacle SS receptacle interconnect receptacle without tail cover with tail cover Locking component type: without locking component J locking screw(straight slot) J locking screw(hex, not recommend ) TH connect nut NH guide hole with nut mounted hoose mating connector When choosing mating connector with locking accessories usually choose the locking component which one side with connect nut(th), the other side with locking screw(j). When choosing product with guide accessories,connector without locked component but only with guide component,it need fix on mounting panel after mated,for avoiding connector take off. When choosing mating connector with guide components usually choose the guide component which one side with guide pin, the other side with guide hole sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35

Free Mounted rimp 6 - - -5 PI -J ontact row: two rows nickel plating ontact plating: gold plating plug crimp free mounted ontact number: 9 5 5 3 37 5 65 69 ontact type PI pin in plug H socket in

3 Free Mounted rimp PI -J ontact row: two rows nickel plating ontact plating: gold plating plug crimp free mounted ontact number: ontact type PI pin in plug H socket in receptacle without tail cover receptacle J locking screw(straight slot, dimension=.5mm) J locking screw(hex, not recommend, dimension=.mm) emark Locking screw fixed on the outer shell, can't disassembly onnector is free mounted,not fixed,usually mated with connector which have nut ecommended J(straight slot screw) types of screws,tihgt by miniature straight screwdriver When choose J(hex) type of screws,tight by.7mm subtense hex screwdriver M.6 -M receptacle plug 5pins pins pins 4.7 5pins.96 iension pins emark: ll dimensions are in mm 3 sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35

Vertical Mounted rimp 6 - - H -5 -TH ontact row: two rows nickel plating ontact plating: gold plating plug crimp vertical mounted ontact number: 9 5 5 3 37 5 65 69 ontact type PI pin in plug H socket

4 Vertical Mounted rimp H -5 -TH ontact row: two rows nickel plating ontact plating: gold plating plug crimp vertical mounted ontact number: ontact type PI pin in plug H socket in receptacle without tail cover receptacle TH connect nut emark onnectiong nut with thread structure forepart used for locking screw,back part used for mounting The connector with connect nut that usually mated with connector which have locking screw Screw-in depth on mount screw Sketch of mount panel and screw.6 -M.6 3.4max -. ± min 5.9 Mount hole dimension(only for reference) plug iension pins pins pins pins pins emark: ll dimensions are in mm sunkye International o., Limited. sales@sunkye.com Tel: Fax:

5 Vertical Mounted rimp Screw-in depth on mount screw Sketch of mount 4max panel and screw ±.5 -M min Mount hole dimension(only for reference) receptacle iension pins pins pins pins pins emark: ll dimensions are in mm 5 sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35

Horizontal Mounted rimp 6-3 - H -5 -TH ontact row: two rows nickel plating ontact plating: gold plating plug crimp 3 horizontal mounted ontact number: 9 5 5 3 37 5 65 69 ontact type PI pin in plug H

6 Horizontal Mounted rimp H -5 -TH ontact row: two rows nickel plating ontact plating: gold plating plug crimp 3 horizontal mounted ontact number: ontact type PI pin in plug H socket in receptacle without tail cover receptacle TH connect nut emark onnector is horizontal mounted The connector with connect nut that usually mated with connector which have locking screw Sketch of mount panel.3 and screw Sketch of mount panel.3 and screw M.6 -M receptacle plug iension pins pins pins pins pins emark: ll dimensions are in mm sunkye International o., Limited. sales@sunkye.com Tel: Fax:

rimp Siamese onnection 6-4 - PP -5 ontact row: two rows nickel plating ontact plating: gold plating crimp PP 4 crimp siamese ontact number: 9 5 5 3 37 5 65 69 ontact type: PP plug interconnect plug

7 rimp Siamese onnection PP -5 ontact row: two rows nickel plating ontact plating: gold plating crimp PP 4 crimp siamese ontact number: ontact type: PP plug interconnect plug PS plug interconnect receptacle SS receptacle interconnect receptacle PS emark The matching locking component for this series is single form. () Plug with locking screw () ecetacle with locking nut 向 L(ustomize design) 6. Plug M.6 -M.6 eceptacle iension pins.53 pins pins pins pins emark: ll dimensions are in mm 7 sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35

8 Nut Mounted rimp eceptacle with Guid Hole H -5 -TH ontact row: two rows nickel plating ontact plating: gold plating crimp 5 nut mounted ontact number: H ontact type: H socket in receptacle without tail cover NH guide hole with nut mounted emark onnector with guid hole,usually mated with plug which have guid pin sketch of mounting panel +. ±.5 M min Mount hole dimension(only for reference) receptacle iension pins pins pins pins pins emark: ll dimensions are in mm sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35

Flange Mounted rimp eceptacle with Guid Hole 6-6 - -5 H - ontact row: two rows nickel plating ontact plating: gold plating crimp 6 flanget mounted ontact number: H 9 5 5 3 37 5 65 69 ontact type: H

9 Flange Mounted rimp eceptacle with Guid Hole H - ontact row: two rows nickel plating ontact plating: gold plating crimp 6 flanget mounted ontact number: H ontact type: H socket in receptacle without tail cover without locking component emark onnector with guid hole,usually mated with plug which have guid pin Sketch of ±.5 min E mounted panel, screw and nut M.6.7min. Mount hole dimension(only for reference) receptacle E pins pins pins E 5pins pins emark: ll dimensions are in mm 9 sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35

Floating Mounted rimp Plug 6 - - 7 PI -5 - ontact row: two rows nickel plating ontact plating: gold plating crimp 7 floating mounted ontact number: PI 9 5 5 3 37 5 65 69 ontact type: H socket in

10 Floating Mounted rimp Plug PI -5 - ontact row: two rows nickel plating ontact plating: gold plating crimp 7 floating mounted ontact number: PI ontact type: H socket in receptacle without tail cover without locking component emark onnector with guid pin and floating tube,application on blind-mated connector onnector usually mated with receptacle which have guid hole 4..(flotation value) 3..(flotation value) Sketch of mounted panel, screw and nut.67.5 M.6.7min ±.5 min Mount hole dimension(only for reference) Plug pins pins pins pins pins emark: ll dimensions are in mm sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35

11 Free Mounted rimp onnector with Tail over PI -J ontact row: two rows nickel plating ontact plating: gold plating PI crimp free mounted ontact number: ontact type PI pin in plug H socket in receptacle with tail cover H J locking screw(straight slot, E dimension=mm) J locking screw(hex, not recommend, E dimension=.6mm) emark onnector with integrated tail cover,bind shielding net on tail cover,shield whole connector,tail cover non-removable onnector is free mounted,not fixed,usually mated with connector which have nut ecommended J(straight slot screw) types of screws,tihgt by miniature straight screwdriver When choose J(hex) type of screws,tight by.7mm subtense hex screwdriver. back view without shield net Plug bind cable shield net and nylon filament sleeve -M.6 4. E pins pins pins emark: ll dimensions are in mm pins 5pins sunkye International o., Limited. sales@sunkye.com Tel: Fax:

12 back view without shield net eceptacle bind cable shield net and nylon filament sleeve -M E pins pins pins pins pins emark: ll dimensions are in mm sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35

Vertical Mounted rimp onnector with Tail over 6 - - -5 H -TH ontact row: two rows nickel plating ontact plating: gold plating PI crimp vertical mounted ontact number: 9 5 5 3 37 5 65 69 ontact type

13 Vertical Mounted rimp onnector with Tail over H -TH ontact row: two rows nickel plating ontact plating: gold plating PI crimp vertical mounted ontact number: ontact type PI pin in plug H socket in receptacle H with tail cover TH connect nut emark onnector with integrated tail cover,bind shielding net on tail cover,shield whole connector,tail cover non-removable onnector usually mated with connector which have screw s these series connector limited by dimension,it can't use standard M.6mm screw,so we provide special-made M.6*6 mounted screw. -M.6 back view without shield net Screw-in depth on mount screw 3.9max Plug Sketch of mount panel and screw bind cable shield net and nylon 6.5 E E 4.3 5pins. 4.7 min ±.5 filament sleeve 4-. Mount hole dimension(only for reference) E pins pins pins pins emark: ll dimensions are in mm 3 sunkye International o., Limited. sales@sunkye.com Tel: Fax: 5-35.

14 back view without shield net Screw-in depth on mount screw 4.5max Sketch of mount panel and screw eceptacle bind cable shield net and nylon filament sleeve E +. ±.5 -M min 4-. Mount hole dimension(only for reference) E E pins pins pins pins pins emark: ll dimensions are in mm sunkye International o., Limited. sales@sunkye.com Tel: Fax:

15 Horizontal Mounted rimp onnector with Tail over H -TH ontact row: two rows nickel plating ontact plating: gold plating PI crimp 3 horizontal mounted ontact number: ontact type PI pin in plug H socket in receptacle H with tail cover TH connect nut emark onnector with integrated tail cover,bind shielding net on tail cover,shield whole connector,tail cover non-removable onnector usually mated with connector which have screw Sketch of mount panel and screw Plug 4.75 back view without shield net bind cable shield net and nylon filament sleeve -M pins pins pins emark: ll dimensions are in mm pins 5pins sunkye International o., Limited. sales@sunkye.com Tel: Fax:

16 back view without shield net 5.5 eceptacle Sketch of mount panel and screw bind cable shield net and nylon filament sleeve M pins pins pins pins pins emark: ll dimensions are in mm sunkye International o., Limited. sales@sunkye.com Tel: Fax:

MIL-DTL Micro-D Connector

MIL-DTL Micro-D Connector Specication MIL-TL-83513 Micro- onnector MIL-TL-83513 Micro- onnector R04J Series rimp ontact Type nvironment temperature: ~ Vibration: 10z~2000z, 196m/s Random vibration: Power spectrum density 0.4 z