MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction

Transcription

1 MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The metal shell and plastic shell are available with solder cup and solid or stranded wire terminations Mating force maximum is 10 oz. [2.78N] times the number of contacts Durability No known mechanical or electrical issues detrimental to the function of the connectors after 500 cycles of mating and unmating urrent Rating 3 amps max per contact MIRODOT onnectors MK and MD High Density Microminiature D onnectors described in this catalog comprise a complete connector system, which is adaptable to a numerous variety of form factors. Low engaging force is achieved by the manner in which the twist pin contacts are designed. y constructing the male contact as a breathing helical spring, electrical contact is achieved at many points around the periphery of the pin bundle rather than at a few discrete points, as in conventional pin designs. Normal twist pin engagement force is 6 oz. [1.67N] typically and 8 oz. [2.22N] maximum. The low force twist pins exhibit an engaging force of 4 oz. [1.11N] typically and 5 oz. [1.39N] maximum. The MK and MD Series of connectors featured in this catalog are designed to meet the applicable requirements of MlL-DTL-83513, for intermateability, interchangeability, and performance. Designed for both military and commercial applications, the MK s and MD s are especially well suited for use in miniaturized airborne and space electronics, computers, and test equipment. The metal shell MK s and plastic shell MD s are available with solder cup, and solid or stranded wire terminations. MK transition blocks are standard for printed circuit board mounting. ustom termination configurations for both MK and MD can be accommodated. Micro D s are also supplied in wired harness assemblies Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

2 Technical and Performance Data (pplicable to MK, MD and MDM unless otherwise noted) MIRODOT MK/MD/MDM Series Metal and Plastic Shell onnectors lectrical ontacts 24 WG twist pin, 24 WG precision machined barrel or Stamped and Formed 24 WG and. Wire Range 24 WG to 30 WG solid and stranded. ontact Resistance (voltage drop) 25 millivolts max. at 3 amps, 77 ± 7.4 F [25 ± 3 ]. urrent Rating 3 amps max. per contact. Dielectric Withstanding Voltage Volts RMS 60 Hz at room ambient. t sea level 600V t 70,000 ft. [21,336 m] 150V Insulation Resistance 5,000 megohms min. (@ 500 VD) at ambient room temperature. Magnetic Permeability 2 mu max. Mechanical ontact Spacing.050 [1.27mm] centers. ontact ngagement & Separation Standard contact engaging force is 6.0 oz. [1.67N] (8.0 oz. [2.22N] max.). Separation force is 0.5 [.14N] oz. min. Mating Force Maximum alculated as 10 oz. times the number of contacts. nvironmental Temperature Range -67 F to 257 F [-55 to +125 ] for MK/MD, -67 F to 302 F [-55 to +150 ] for MDM. Vibration No discontinuity in excess of 1 µ second when tested in accordance with I , test condition IV. Solderability onnectors shall pass the test requirements of MIL-STD- 202, Method 208 Shock No discontinuity in excess of 1 µ second when tested in accordance with I , test condition. Durability No mechanical or electrical defects detrimental to the function of the connectors after 500 cycles of mating and unmating. Humidity fter exposure to humidity as specified I , Method II, IR shall be 1 megohm minimum following step 7a of I section and 1000 megohms minimum after 24 hours of conditioning per I Salt Spray onnectors shall meet the performance requirements of contact resistance, mating and unmating forces, and contact retention after being subjected to the 48 hour 5% solution salt spray test per I ,ondition. Fluid Immersion Unmated connectors after being fully immersed in one of the following fluids, for the prescribed time, will mate at a force of 10 oz. [2.78N] times the number of contacts or less: Perchloroethylene, 2 hours; Lubricating oil per MIL-L-23699, 20 hours. Insert Retention Inserts will withstand a 50 lb. [34N/cm 2 ] per square inch load in either direction. rimp Termination Tensile Strength (Unassembled contacts with crimped stranded wire terminations) Wires will not pull out of contacts when the following axial loads are applied: 24 WG, 5 lbs. [22.24N]; 26 WG, 4 lbs. [17.79N]; 28 WG, 3 lbs. [13.34N] Outgassing When tested in accordance with SP-R-0022, Total Mass Loss (TML) shall be less than 1.0% and Volatile ondensable Material (VM) shall be less than 0.1% of the original specimen. Materials and Finishes ontacts opper alloy plated with [.00127] gold over copper flash per MIL-G Type II. Hardware see pages 5-61 and MK-Metal Shell Insulator Liquid crystal polymer (LP) per STM D5138, or Polyphenylene sulfide per STM D4067 or MIL-M Interfacial Seal Fluorosilicone Rubber per MIL-R (socket side only) ody Shell luminum alloy-high grade plated admium per QQ-P-416 Nickel, electroless per MS 2404 Transition lock Shell Liquid crystal polymer (LP) per STM D5138, or Polyphenylene sulfide per STM D4067 or MIL-M Potting Material poxy, lack MD-Plastic Shell Insulator/ody Polyester, glass filled per MIL-M-24519, Liquid crystal polymer (LP) per STM D5138, or Polyphenylene sulfide per STM D4067 or MIL-M Wire Terminations Solid copper per QQ-W-343 gold plated per MIL-DTL Stranded TFLON insulated per MIL-W Stranded TFLON insulated per MIL-W /11, /33 Solid copper per QQ-W-343, solder dipped (Transition block) MDM-Metal Shell Insulator Diallyl Phthalate per MIL- M-14, Type SDG-F ody Shell luminum alloy high grade, nickel plated 5Nanominiature and Microminiature onnectors Twist, and ontacts The contact spring member normally found in socket contacts has been eliminated by creating a breathing helical spring principle on the pin contact smaller, more durable contacts can be manufactured economically. Wire range WG solid & stranded. MIL-DTL Only the descriptive legend in bold italic is applicable to current MIL-DTL configurations; MIL-DTL-83513/1 through /4 MKS metal shell; MIL-DTL-83513/6 through /9 MD plastic shell. In addition, MIL-DTL solid copper wire termination is specified 25 WG, 0.5; and 1.0 [25.4] lengths only and stranded insulated wire termination is specified 26 WG, 18.0 [457.2] and 36.0 [914.4] lead lengths only. Hardware for MIL-DTL configurations is specified separately by the M83513/5-XX designation. M83513/1 through /4 and /6 through /9 specify no hardware (). Mounting/mating hardware is shown on page 5-61 with the applicable military nomenclature. The MIRODOT catalog part number for a MIL-DTL configuration may be constructed to include the desired hardware. See pages 5-78 through 5-82 for M83513/ cross reference. Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-53

3 MIRODOT How To Specify MK and MD onnectors Metal Shell S Solder pots 26 WG max. X Special, not described by legend. MK N1 37 P onnector Series Lead Length in Inches (Min.) MK Twist & Drawn MKS Stamp & Formed & Insulation olor or Finish Shell Finish 1 admium, lear 2 admium, Yellow hromate N1 Nickel, lectroless 1 ll white wire 6 are (unfinished) 2 ll yellow wire 7 olor coded per MIL-STD-681, System 1 3 ll gray wire 8 Special color code 4 Gold plated 9 10 Solid color repeating per MIL-DTL Tin dipped gold plated Hardware (See Pages 5-79 and 5-80) No Hardware F Float ushing KM Jackscrew, Slotted Head, High Profile (9-51) HM Jackscrew, Slotted Head, High Profile (100) LM Jackscrew, Slotted Head, Low Profile (9-51) JM Jackscrew, Slotted Head, Low Profile (100) QM Jackscrew, llen Head, High Profile (9-51) TM Jackscrew, llen Head, High Profile (100) RM Jackscrew, llen Head, Low Profile (9-51) NM Jackscrew, llen Head, Low Profile (100) P Jackpost ssembly (9-51) S Jackpost ssembly (100) X Lockscrew, Slotted Head Y Lockscrew, llen Head Z lip and Key (lip Mount Only) Wire Type Type, 7 strand Per MIL-W Type T, 7 strand { Type, 19 strand D Type T, 19 strand F 7 strand per MIL-W-22759/11 (28 WG only) G 19 strand per MIL /11 (26 WG only), 24 WG L opper, Solid (25 WG only) Q Stranded per MIL-W-22759/33 (26 WG only) Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG Layout 9, 15, 21, 25, 31, 37, 51, 100 See contact arrangement ontact Type P (Plug) S (Receptacle) Plastic Shell onnector Series S Solder pots 26 WG max. X Special Does not fit description below. MD R3 37 P Lead Length in Inches (Min.) Insulator Type/Material G2 lip Mount, polyester, natural G3 Screw Mount, polyester, natural,.093 Flg. R2 lip Mount, Ryton R3 Screw Mount, Liquid rystal Polymer or Polyphenylene Sulfide Hardware (See Pages 5-79 and 5-80) No Hardware F Float ushing KM Jackscrew, Slotted Head, High Profile LM Jackscrew, Slotted Head, Low Profile QM Jackscrew, llen Head, High Profile RM Jackscrew, llen Head, Low Profile P Jackpost ssembly X Lockscrew, Slotted Head Y Lockscrew, llen Head Z lip and Key (lip Mount Only) Layout 9, 15, 21, 25, 31, 37, 51 See contact arrangement Insulation olor or Finish 1 ll white wire 6 are (unfinished) 2 ll yellow wire 7 olor coded per MIL-STD-681, System 1 3 ll gray wire 8 Special color code 4 Gold plated 9 10 Solid color repeating per MIL-DTL Tin dipped gold plated Wire Type Type, 7 strand Per MIL-W Type T, 7 strand { Type, 19 strand D Type T, 19 strand F 7 strand per MIL-W-22759/11 (28 WG only) G 19 strand per MIL /11 (26 WG only), 24 WG L opper, Solid (25 WG only) Q Stranded per MIL-W-22759/33 (26 WG only) Wire Size 4 24 WG 5 25 WG 6 26 WG 8 28 WG 0 30 WG ontact Type P (Plug) S (Receptacle) Note: Items in bold italic are qualified to MIL-DTL Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

4 MIRODOT ontact rrangements Face View of Insert ( Side is Mirror Image) ontacts 15 ontacts 21 ontacts ontacts ontacts (MDM Only) ontacts ontacts ontacts (MK Only) ontacts Note: MK metal shells are not designed to intermate or interchange with MD plastic shells. If metal/plastic intermating is desired, use MDM Series Metal Shell on pages 5-72 and 5-73 with MD Series Plastic Shell on page Nanominiature and Microminiature onnectors Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-55

5 MIRODOT MK Series Metal Shell onnectors Dimensions per MIL-DTL Two Mtg. Holes Ø.092±.004 (9-51) [2.34±0.10] Ø (100) [ ] F ontact #1.183±.003 [4.65±0.08] Plug ( side).406±.010 [10.31±0.25].093±.005 [2.36±0.13] D Two Mtg. Holes Ø.092±.004 (9-51) [2.34±0.10] F ontact #1 Ø (100) [ ].195±.003 [4.95±0.08] Receptacle ( side).419±.010 [10.64±0.25].093±.005 [2.36±0.13] D 5-56 Part Number ±.010 [.254] MK**- 9P*** MK**- 9S*** MK**- 15P*** MK**- 15S*** MK**- 21P*** MK**- 21S*** MK**- 25P*** MK**- 25S*** MK**- 31P*** MK**- 31S*** MK**- 37P*** MK**- 37S*** MK**- 51P*** MK**- 51S*** MK**- 100P*** MK**- 100S*** P =, S = Max [.254] D Max [.457] F ±.010 [.254] ± 005 [.127] Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

6 MIRODOT MK Series Metal Shell onnectors Panel Mounting utout Dimensions Panel Mounting Dimensions MK.200 [5.08].395 [10.03].300 [7.62] Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted Plug Front Mounted Receptacle Rear Mounted Panel utout Dimensions MK.095 [2.41] Full Radius (Typ.) 9-51 Full Radius (Typ.).122 [3.10].122 [3.10].095 [2.41] R Plcs [ ] Figure 1 Front Mounting 9-51 Figure 2 Rear Mounting 1.810/1.805 [45.98/45.85] [36.83/36.73] Front Mounting 1.810/1.805 [45.98/45.85].015 Max. R [.381] Typ. 116 Typ. Full Radius (Typ.).369/.364 [9.37/9.24] R.015 Max. [.381] Typ. Number of Fig [.102] [.102] [.127] ontacts.000 [.000].000 [.000].000 [.000] Nanominiature and Microminiature onnectors /.398 [10.24/10.11] Full Radius (Typ.) [38.51/38.40] R.055 Max. [1.40] Typ. Rear Mounting Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-57

7 MIRODOT MD Series Plastic Shell onnectors Screw Mount Dimensions Per MIL-DTL Two Mtg. Holes Ø.092±.004 [2.34±.10] F ontact #1.199±.005 [5.05±.13].395/.360 [10.03/9.14] Plug ( side).094±.006 [2.39±0.15] D Two Mtg. Holes Ø.092±.004 [2.34±0.10] F ontact #1.180±.005 [4.57±0.13] Receptacle ( side).375/.340 [9.52/8.64] Liquid rystal Polymer or Polyphenylene Sulfide MDR3* per MIL-DTL ±.006 [2.39±0.15] Note: MD Plastic Screw Mount Series is intermateable with MDM Metal Series onnectors (Pages 5-72 and 5-73). D 5-58 Part Number ±.010 [.254] F vg. Weight Max [.254] D Max lbs. ± 5% [.457] ±.010 [.254] ± 005 [.127] [grams] MD**- 9P*** MD**- 9S*** MD**- 15P*** MD**- 15S*** MD**- 21P*** MD**- 21S*** MD**- 25P*** MD**- 25S*** MD**- 31P*** MD**- 31S*** MD**- 37P*** MD**- 37S*** MD**- 51P*** MD**- 51S*** P =, S = Note: Weight given is with.500 [12.7] uninsulated, solid, 24 WG gold plated copper pigtails. *See How to Specify for description, on page Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

8 MIRODOT MD Series Plastic Shell onnectors (ontinued) lip Mount MD [2.44/2.29].019 [.483] ontact #1.199 [5.05].395/.360 [10.03/9.14] Plug ( side).060 [1.52] D [2.44/2.29].019 [.483] ontact #1 Part D Number ±.005 [.127] Max. ±.010 [.254] ±.010 [.254] ±.005 [.127] MD**- 9P*** MD**- 9S*** MD**- 15P*** MD**- 15S*** MD**- 21P*** MD**- 21S*** MD**- 25P*** MD**- 25S*** MD**- 31P*** MD**- 31S*** MD**- 37P*** MD**- 37S*** MD**- 51P*** Receptacle ( side) Note: lip Mount not covered by current issue of MIL-DTL /.340 [9.52/8.64] vg. Weight lbs. ± 5% [grams] [4.57].060 [1.52] D 5Nanominiature and Microminiature onnectors MD**- 51S*** P =, S = Note: Weight given is with.500 [12.7] uninsulated, solid, 24 WG gold plated copper pigtails. *See How to Specify for description, on page Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-59

9 MIRODOT MD Series Plastic Shell onnectors Panel Mounting utout Dimensions Panel Mounting Dimensions MD lip Mount Screw Mount.200±.005 [5.08±0.13].200±.005 [5.08±0.13] Plug and Receptacle Rear Mounted.330±.005 [8.38±0.13] Plug and Receptacle Rear Mounted.395±.005 [10.03±0.13] Plug and Receptacle Front Mounted Plug and Receptacle Front Mounted.265±.005 [6.73±0.13].300±.005 [7.62±0.13] Plug Front Mounted Receptacle Rear Mounted Plug Front Mounted Receptacle Rear Mounted 5-60 Panel utout Dimensions MD lip Mounting R.015 Max. [.381] Typ. Front Figure 1 R.015 Max. [.381] Typ. Rear Figure 3 Notes: Front mounting preferred [ ] Full Radius (Typ.).089 [2.26] Full Radius (Typ.) Screw Mounting Front Figure R [ ] Rear Figure 4 R.015 [.381] Max. Typ. 116 Typ. Number of Fig [.102] [.102] [.127] ontacts.000 [.000].000 [.000].000 [.000] [11.13].177 [4.50] [10.46].177 [4.50].570 [14.48] [11.13].222 [5.64] [9.75].222 [5.64].570 [14.48] [14.93].177 [4.50] [14.27].177 [4.50].720 [18.29] [14.93].222 [5.64] [13.56].222 [5.64].720 [18.29] [18.75].177 [4.50] [18.08].177 [4.50].870 [22.10] [18.75].222 [5.64] [17.37].222 [5.64].870 [22.10] [21.29].177 [4.50] [20.62].177 [4.50].970 [24.64] [21.29].222 [5.64] [19.91].222 [5.64].970 [24.64] [25.10].177 [4.50] [24.43].177 [4.50] [28.45] [25.10].222 [5.64] [23.72].222 [5.64] [28.45] [28.91].177 [4.50] [28.24].177 [4.50] [32.26] [28.91].222 [5.64] [27.53].222 [5.64] [32.26] [27.64].224 [5.69] [26.97].224 [5.69] [30.99] [27.64].264 [6.71] [26.26].264 [6.71] [30.99] Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

10 MIRODOT Mounting and oupling Hardware For Screw Mount MK, MKS, MD and MDM 9-51 ontacts Slot Head (KM) Jackscrew Retaining Ring 2-56UN-2 Ø.156 Max. [3.96] Over Knurl.600 [15.24].853 ±.015 [21.67 ± 0.38] (LM) Ø.125 [3.18] Jackscrew Retaining Ring 2-56UN [2.29] [ ] (P).125 Hex. [3.18] UN-2 [2.18] ushing Lockwasher Hex Nut 2-56UN [4.75].475 [12.07] Part Number Jackscrew ssembly High Profile M83513/5-06 (KM) S Part Number Jackscrew ssembly Low Profile M83513/5-05 (LM) S Part Number Jackpost ssembly (P) S M83513/5-07 P mates with KM, LM, QM and RM Jackscrew ssemblies ontacts 1/16" llen Head (QM) Ø.156 Max. [3.96] Over Knurl (RM) Ø.125 [3.18].098 [2.29] 100 ontacts Slot Head Jackscrew Retaining Ring 2-56UN-2 (HM) Jackscrew Retaining Ring.600 [15.24].853 ±.015 [21.67 ± 0.38] Part Number Jackscrew ssembly High Profile M83513/5-03 (QM) S UN-2 Ø.200 Max. [3.96] Over Knurl.585 [14.86].920 Max. [23.37] Part Number Jackscrew ssembly High Profile M83513/5-16 (HM) S Jackscrew Retaining Ring 2-56UN-2 (JM) [ ] Part Number Jackscrew ssembly Low Profile M83513/5-02 (RM) S Ø.187 [4.75] Jackscrew Retaining Ring 4-40UN [2.54].415 Max. [10.54] Part Number Jackscrew ssembly Low Profile M83513/5-15 (JM) S Notes: 1. Jackpost ssemblies will accommodate.094 [2.39] max. thickness panel. 2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See How To Specify page 5-54). 3. Items in bold italic are qualified to MIL-DTL Mounting torque values and mating torque values are per MIL-DTL-83513/5. 5Nanominiature and Microminiature onnectors 100 ontacts 1/16" llen Head (TM) Jackscrew Retaining Ring 4-40UN-2 Ø.200 Max. [3.96] Over Knurl.585 [14.86].920 Max. [23.37] (NM) Ø.187 [4.75] Jackscrew Retaining Ring 4-40UN [2.54].415 Max. [10.54] (S).187 Hex. [4.75] UN-2 [2.84] ushing Lockwasher Hex Nut 4-40UN Max. [4.70].475 [12.07] Part Number Jackscrew ssembly High Profile M83513/5-13 (TM) S Part Number Jackscrew ssembly Low Profile M83513/5-12 (NM) S Part Number Jackpost ssembly (S) S M83513/5-17 S mates with HM, JM, TM and NM Jackscrew ssemblies. Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-61

11 MIRODOT Mounting and oupling Hardware (ontinued) For Screw Mount MK, MD and MDM (ontinued) Slot Head (X) 1/16" llen Head (Y) Ø.125 [3.18] Lockscrew.075 [1.91] Ø.125 [3.18] Lockscrew.075 [1.91] Retaining lip 2-56UN-2 Retaining lip.343 ± UN-2 [8.71 ± 0.25] Part Number Lockscrew ssembly Part Number Lockscrew ssembly For lip Mount MD (Z).600 [15.24].356 [9.04] Part Number Mounting Key and lip P/N (2 Required) For Float Mount MK, MD and MDM (F) Washer ushing Float Mount ushing (Factory Installed) 5-62 Notes: 1. Jackpost ssemblies will accommodate.094 [2.39] max. thickness panel. 2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See How To Specify page 5-54). 3. Hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N per connector half. Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

12 MIRODOT MK Transition locks RT1 Right-ngle Termination onfiguration Optional Jackpost (2 Plcs.) For 9 Thru 51: UN-2 For 100: UN-2 D Mounting Surface MIL-DTL-83513/10 through /15 configurations. 90 Narrow Profile termination configurations. See pages 5-78 to 5-82 for M83513 cross references. ontact #1 ( onnectors).190 Max. [4.83] (Sizes 9-51).185 Max. [4.70] (Size 100 only).109 ±.015 [2.77 ±0.39] ontact #1 ( onnectors) F G F G Mounting Surface How To Specify MK N1 P 37 P RT1.096±.003 Dia. [2.44±0.08] Typ. Mounting Surface 9, 15, 21 & 25 ontacts 31, 37, 51 & 100 ontacts Right ngle Termination (Solder Dipped) RT1 w/.109 Leads RT1 w/.140 Leads RT1 w/.172 Leads ontact Type S = STD P = STD Layout 9, 15, 21, 25, 31, 37, 51 and 100 H.096±.003 Dia. [2.44±0.08] Typ..125±.003 Dia. [3.18±0.08] Typ. (Size 100 Only) 5Nanominiature and Microminiature onnectors Hardware P = Jackpost (9-51) = No Hardware S = Jackpost (100) Shell Finish 2 = admium, Yellow hromate N1 = Nickel, lectroless onnector Series (See page 87) Notes: 1. For terminal identification see page Grid pattern for all configurations is.100 x.100 [2.54 x 2.54]. 3. Lead lengths shown are for RT1. 4. Items in bold italic are qualified to MIL-DTL Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-63

13 MIRODOT MK Transition locks (ontinued) RT1 Right-ngle Termination onfiguration (ontinued) Part Number MK-**- *- 9PRT1 MK-**- *- 9SRT1 MK-**- *- 15PRT1 MK-**- *- 15SRT1 MK-**- *- 21PRT1 MK-**- *- 21SRT1 MK-**- *- 25PRT1 MK-**- *- 25SRT1 MK-**- *- 31PRT1 MK-**- *- 31SRT1 MK-**- *- 37PRT1 MK-**- *- 37SRT1 MK-**- *- 51PRT1 MK-**- *- 51SRT1 MK-**- *- 100PRT1 MK-**- *- 100SRT1 P =, S = D F G H Max. ± 005 [.127] Max. Max. Max [.254] [.254] Max Note: Items in bold italic are qualified to MIL-DTL Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

14 MIRODOT MK Transition locks (ontinued) RT1 Right-ngle Termination onfiguration (ontinued) View is of termination side of plug connector. For receptacle, use mirror image. (xcept 100 contacts) 5Nanominiature and Microminiature onnectors Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-65

15 MIRODOT MK Transition locks (ontinued) ST1 Straight Termination onfiguration ontact #1 ( onnector) ontact #1 ( onnector) F.096±.003 Dia. Typ. [2.44±.076] (For Size 9 Thru 51).125±.003 Dia. Typ. [3.18±.076] (For Size 100 Only) MIL-DTL-83513/22 through /27 configurations. 180 Narrow Profile termination configurations. See pages 5-78 to 5-82 for M83513 cross references..190 Max. (Sizes 9-51) [4.83].185 Max. (Size100 only) [4.70] D Optional Jackpost (2 Plcs.) For 9 Thru 51: UN-2 For 100: UN [9.02] Max. [13.97] Max. (Sizes 9-51) (Size100 only).165 [4.20] Max. (Sizes 9-51).303 Max. (Size 100 only) [7.70].100 [2.54] Typ..050 [1.27] Typ..109 ±.015 [2.77 ±0.39] (Lead Length For ST1 Shown) Lead #1 ( onnector) Lead #1 ( onnector) How To Specify MK N1 P 37 P ST Straight Termination (Solder Dipped) ST1 w/.109 Leads ST1 w/.140 Leads ST1 w/.172 Leads ontact Type S = STD P = STD Layout 9, 15, 21, 25, 31, 37, 51 and 100 Hardware P = Jackpost (9-51) = No Hardware S = Jackpost (100) Shell Finish 2 = admium, Yellow hromate N1 = Nickel, lectroless onnector Series (See page 87) Notes: 1. For terminal identification see page Grid pattern for all configurations is.100 x.100 [2.54 x 2.54]. 3. Lead lengths shown are for ST1. 4. Items in bold italic are qualified to MIL-DTL Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

16 MIRODOT MK Transition locks (ontinued) ST1 Straight Termination onfiguration (ontinued) Part Number MK-**- *- 9PST1 MK-**- *- 9SST1 MK-**- *- 15PST1 MK-**- *- 15SST1 MK-**- *- 21PST1 MK-**- *- 21SST1 MK-**- *- 25PST1 MK-**- *- 25SST1 MK-**- *- 31PST1 MK-**- *- 31SST1 MK-**- *- 37PST1 MK-**- *- 37SST1 MK-**- *- 51PST1 MK-**- *- 51SST1 MK-**- *- 100PST1 MK-**- *- 100SST1 P =, S = D F Max. ±.007 [.178] ±.005 [.127] Max. Max. Max Nanominiature and Microminiature onnectors Note: Items in bold italic are qualified to MIL-DTL Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-67

17 MIRODOT MK Transition locks (ontinued) ST1 Straight Termination onfiguration (ontinued) View is of termination side of plug connector. For receptacle, use mirror image Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

18 MIRODOT MK ST2 Series Straight Mount P onnectors MK with actus end Termination.308 [7.83] Max. ontact # UN-2 Thd. Opt. Jackpost 2 Plcs..190 [4.83] Max..182 ±.004 [4.62 ±0.10] Meets MIL-DTL Performance requirements Single metal shell with no Transition lock Low profile and light weight.100 [2.54] x.075 [1.91] grid pattern Design allows lower cost construction.210 ±.02 [5.33 ±0.5].225 [5.72] Ref..308 [7.83] Max. Metal Mounting Surface.190 [4.83] Max. #25 WG, opper, Hard, Gold Plated, Solder Dipped.100 [2.54] Typ..075 [1.91] Typ..050 [1.27] Typ..025 [0.64] Typ. ontact #1.400 Max. [10.16] 2-56 Thd. Studs. Opt..075 [1.91] Typ..038 [0.97] Typ UN-2 Thd. Opt. Jackpost 2 Plcs..195 ±.003 [4.95 ±0.08].400 Max. [10.16].109 [2.76] Min..109 [2.76] Min. Hardware omitted for clairity 5Nanominiature and Microminiature onnectors 2-56 Thd. Studs. Opt..210 ±.02 [5.33 ±0.5].225 [5.72] Ref. #25 WG, opper, Hard, Gold Plated, Solder Dipped.075 [1.91] Typ. Hardware omitted for clairity Metal Mounting Surface.100 [2.54] Typ..075 [1.91] Typ..050 [1.27] Typ..025 [0.64] Typ..038 [0.97] Typ. Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-69

19 MIRODOT MK ST2 Series Straight Mount P onnectors (ontinued) Part Number MK-**-*- 9 PST2 MK-**-*- 9 SST2 MK-**-*- 15 PST2 MK-**-*- 15 SST2 MK-**-*- 21 PST2 MK-**-*- 21 SST2 MK-**-*- 25 PST2 MK-**-*- 25 SST2 MK-**-*- 31 PST2 MK-**-*- 31 SST2 MK-**-*- 37 PST2 MK-**-*- 37 SST2 Max. ±.005 Max How To Specify MK N1 P 37 P ST2 Straight Termination ontact Type S = Standard P = Standard Layout 9, 15, 21, 25, 31, 37 Hardware P = Jackpost (2-56 THD) = No Hardware Shell Finish 2 = admium, Yellow hromate N1 = Nickel, lectroless onnector Series (See Page 5-56) 5-70 Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

20 MIRODOT MK ST2 Series Straight Mount P onnectors (ontinued) 5Nanominiature and Microminiature onnectors Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-71

21 MIRODOT MDM Series Metal Shell onnectors Technical & Performance Data Performance ontact Resistance The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard #24 solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) Solder Pots 600 V at sea level; 150 V at 70,000 feet [21,336 m]. Wire Terminations 750 V at sea level; 200 V at 70,000 feet [21,336m] Vibration (Per MIL-STD-202, Method 204-, ondition D) No discontinuity in excess of 1 microsecond during twelve 20 minute sweeps from 10 to 2,000 PS at.06 double amplitude or 20 G forces, whichever is less. orrosion Resistance (Per MIL-STD-202, Method 101, ondition ) oth mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance Greater than 5,000 megohms at room temperature for the materials listed under Materials. Maximum urrent arrying apacity No. 24 contact, 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. ontact ngaging and Separation Forces 6 oz. [1.67N] maximum (eng.); 0.5 oz. [.14N] minimum (sep.). Temperature Range (Operating) Diallyl phthalate -67 F to 257 F [-55 to +125 ]. Materials Insulator Diallyl phthalate per MIL-M-14, Type SDG-F, Liquid rystal Polymer (LP) per STM D5138, or RYTON per STM D4067. ontacts ontact opper alloy and beryllium copper alloy make up the complete construction. ontact opper alloy. ody Shell High grade aluminum alloy. Finishes ontacts Standard finish is [ ] gold over copper flash per MIL-G-45204, Type II. ody Shell lectroless nickel per MS Note: Insulators are molded into their metal shells No bonded joint is used. Screw Mount F ontact # Dia. [ ] 2 Plcs..193 [4.90] The only metal shell connector that mates with all existing plastic types. This line is ideal for external use and other applications requiring frequent disconnect and remating. When durability and reliability are paramount the metal shell connector is unsurpassed it eliminates the need for retrofitting where new metal shell varieties must mate with older plastic types. Originally designed for military applications, they are currently used for commercial requirements, including computers..379 [9.63].365 [9.27].180 [4.57] F.798 [20.27] ontact #1.093 [2.36].093 [2.36] D [ ] Dia. D 5-72 RYTON is a trademark of hevron hemical ompany LL. Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

22 MIRODOT MDM Series Metal Shell onnectors (ontinued) Screw Mount (ontinued) How To Specify S Solder pot for #26 max. stranded wire X Special, does not fit description below. onnector Series MD M1 37 P Lead Length in Inches (min.) Shell Type and Material M1 Metal Shell Screw Mount Diallyl Phthalate or LP Insulator Hardware (See Pages 5-79 and 5-80) No Hardware F Float ushing KM Jackscrew, Slotted Head, High Profile LM Jackscrew, Slotted Head, Low Profile QM Jackscrew, llen Head, High Profile RM Jackscrew, llen Head, Low Profile P Jackpost ssembly X Lockscrew, Slotted Head Y Lockscrew, llen Head Z lip and Key (lip Mount Only) Wire Size ontact Type P Wire Type Insulation olor or Finish 1 ll white wire 4 Gold plated 7 olor coded per MIL-STD-681, 2 ll yellow wire 5 Tin dipped gold plated System 1 3 ll gray wire 6 are (unfinished) 8 Special color code 9 10 color repeating (solid) per M83513 * Type, 7 strand *D Type T, 19 strand G 19 strand per MIL-22759/11 * Type T, 7 strand F 7 strand per MIL 22759/11 #26 WG, #24 WG * Type, 19 strand (#28 WG only) L opper, solid Q Stranded per MIL-W-22759/33 *Per MIL-W #24 5 #25 6 #26 8 #28 0 #30 S Layout 9, 15, 21, 25, 30, 31, 37, 51 Part Number ±.005 ±.005 ±.010 D ±.010 ±.005 F ±.005 vg. Weight lbs. ± 5% [±.127] [±.127] [±.254] [±.254] [±.127] [±.127] [grams] MDM1-9P*** MDM1-9S*** MDM1-15P*** MDM1-15S*** MDM1-21P*** MDM1-21S*** MDM1-25P*** MDM1-25S*** MDM1-30P*** MDM1-30S*** MDM1-31P*** MDM1-31S*** MDM1-37P*** MDM1-37S*** MDM1-51P*** MDM1-51S*** Note: Weight given is with.500 [12.7] uninsulated, solid, 24 WG gold plated copper pigtails. 5Nanominiature and Microminiature onnectors Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-73

23 MIRODOT MDM Series Metal Shell RF OMOMT onnectors Screw Mount oaxial Terminations vailable now RF Performance in standard subminiature rectangular connectors, with VSWR values of 1.01 to 1.10 in frequencies ranging in D to 2.3 GHz. This is the OMOMT onnector. This series of connectors incorporates the same metal shells and twist pin contacts used in the widely accepted, high reliability, MDM Series. The RF OMOMT onnector Series will accommodate RG 196 /U or RG 178 /U coaxial cable terminated in a unique manner in standard, already tooled insert layouts. This feature results in savings in cost, time and space. The RF OMOMT onnector Series will accommodate a maximum of 17 RG 196 /U or RG 178 /U cables in an area of less than.225 sq. inches [14.51 mm 2 ]. Mixed layouts with coaxial terminations and standard WG 24, 26 and 28 are also immediately available in 7 different shell sizes. The overall envelope and mounting dimensions of equivalent size of OMOMT onnectors are exactly the same as the standard MDM Series..379 [9.63].193 [4.90].250 [6.35] Max..365 [9.27].180 [4.57] Performance Data oaxial Terminations Impedance 49.0 to 51.0 Ohms. Voltage Standing Wave Ratio (VSWR) 1.01:1 to 1.10:1 at frequency ranging in D to 2.3 GHz. Dielectric Withstanding Voltage (60 Hz rms room temperature) 750 V at sea level; 200 V at 70,000 feet [21,336 m]. ontact #1 F F ontact # Dia. [ ] 2 Plcs..093 [2.36] poxy D [ ] Dia..093 [2.36].250 poxy [6.35] Max. D (ctual Test Data) rosstalk (etween djacent Lines) 1 to 2 2 to 3 3 to 4 4 to 5 30 MHz 60.0 db 59.8 db 60.7 db 60.0 db 100 MHz 49.1 db 48.3 db 51.7 db 50.6 db 175 MHz 42.6 db 41.4 db 47.2 db 47.0 db 500 MHz 38.0 db 38.8 db 39.5 db 40.0 db 1000 MHz 31.6 db 32.0 db 30.0 db 32.5 db 2000 MHz 22.4 db 22.5 db 22.3 db 20.8 db 3000 MHz 21.5 db 23.9 db 21.4 db 24.2 db Insertion Loss Sample #1 #2 #3 #4 #5 30 MHz.08 db.08 db.08 db.08 db.08 db 100 MHz.24 db.24 db.25 db.25 db.25 db 175 MHz.35 db.36 db.36 db.34 db.32 db 500 MHz.58 db.50 db.60 db.58 db.48 db 1000 MHz 1.25 db 1.33 db 1.36 db 1.35 db 1.24 db 2000 MHz 1.48 db 1.71 db 1.42 db 1.40 db 1.45 db 3000 MHz 2.66 db 2.45 db 2.74 db 2.86 db 2.84 db Note: Verification of all test data is on file at T onnectivity and is available upon request. ll test runs using RG 196 /U Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

24 MIRODOT MDM Series Metal Shell RF OMOMT onnectors (ontinued) Screw Mount oaxial Terminations (ontinued) How To Specify MD M3 7 P Lead Length in Inches (min.) onnector Series Layout Wire Size ontact Type P 3 RG 196 /U (White insulation) 2 RG 178 /U (rown insulation) X Special, does not fit description* S 3, 5, 7, 8, 10, 12, 17 Maximum RF combinations using RG 196 /U and RG 178 /U cable Shell Type and Material M3 Metal Shell Screw Mount Diallyl Phthalate or LP Insulator *Ordering riteria: wide variety of contact combinations, coaxial and power mixed, are available. ontact T onnectivity for additional arrangement numbers. Part Number MDM3-3P** MDM3-3S** MDM3-5P** MDM3-5S** MDM3-7P** MDM3-7S** MDM3-8P** MDM3-8S** MDM3-10P** MDM3-10S** MDM3-12P** MDM3-12S** MDM3-17P** MDM3-17S** D F ±.005 ±.005 Max. Max. ±.005 ±.005 [±.127] [±.127] [±.127] [±.127] Nanominiature and Microminiature onnectors Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-75

25 MIRODOT MDM Series Metal Shell RF OMOMT onnectors (ontinued) ontact rrangement as Viewed from the ngaging Face of the Side RG196 /U or RG 178 /U 5 RG196 /U or RG 178 /U 7 RG196 /U or RG 178 /U RG196 /U or RG 178 /U 10 RG196 /U or RG 178 /U 1 19 enter onductor RG196 /U or RG 178 /U 1 18 Shield Termination Pattern RG196 /U or RG 178 /U 51 Note: The above contact arrangements are the maximum densities that can be obtained in each shell size when using RG 196 /U or RG 178 /U cable Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit

26 MIRODOT MDM Series Metal Shell onnectors Panel Mounting utout Dimensions Panel Mounting Dimensions MDM.200 ±.005 [5.08 ± 0.13].395 ±.005 [10.03 ± 0.13] Plug and Receptacle Rear Mounted Plug Plug and Receptacle Front Mounted.300 ±.005 [7.62 ± 0.13] Panel utout Dimensions Screw Mounting [ ] Full Radius (Typ.).089 [2.26] Front Figure 1 R.015 [.381] Max. Typ. Plug Front Mounted Receptacle Rear Mounted Number of Fig [+.102] [+.102] [+.127] ontacts.000 [.000].000 [.000].000 [.000] [10.46].177 [4.50].570 [14.48] [9.75].222 [5.64].570 [14.48] [14.27].177 [4.50].720 [18.29] [13.56].222 [5.64].720 [18.29] [18.08].177 [4.50].870 [22.10] [17.37].222 [5.64].870 [22.10] [20.62].177 [4.50].970 [24.64] [19.91].222 [5.64].970 [24.64] [24.43].177 [4.50] [28.45] [23.72].222 [5.64] [28.45] [28.24].177 [4.50] [32.26] [27.53].222 [5.64] [32.26] [26.97].224 [5.69] [30.99] [26.26].264 [6.71] [30.99] 5Nanominiature and Microminiature onnectors Full Radius (Typ.) R [ ] Rear Figure 2 116/117 Note: Front mounting preferred. Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit 5-77

27 MIL-DTL ross Reference 5-78 MKS (Metal Shell) Military Part No. MIRODOT Part No. M83513/01-* MKS-**-- 9PS M83513/01-* MKS-**-- 15PS M83513/01-* MKS-**-- 21PS M83513/01-D* MKS-**-- 25PS M83513/01-* MKS-**-- 31PS M83513/01-F* MKS-**-- 37PS M83513/01-G* MKS-**-- 51PS M83513/01-H* MKS-**--100PS M83513/02-* MKS-**-- 9SS M83513/02-* MKS-**-- 15SS M83513/02-* MKS-**-- 21SS M83513/02-D* MKS-**-- 25SS M83513/02-* MKS-**-- 31SS M83513/02-F* MKS-**-- 37SS M83513/02-G* MKS-**-- 51SS M83513/02-H* MKS-**--100SS M83513/03-01* MKS-**-- 9P6G M83513/03-01* MKS-**-- 15P6G M83513/03-01* MKS-**-- 21P6G M83513/03-D01* MKS-**-- 25P6G M83513/03-01* MKS-**-- 31P6G M83513/03-F01* MKS-**-- 37P6G M83513/03-G01* MKS-**-- 51P6G M83513/03-H01* MKS-**--100P6G M83513/03-02* MKS-**-- 9P6G M83513/03-02* MKS-**-- 15P6G M83513/03-02* MKS-**-- 21P6G M83513/03-D02* MKS-**-- 25P6G M83513/03-02* MKS-**-- 31P6G M83513/03-F02* MKS-**-- 37P6G M83513/03-G02* MKS-**-- 51P6G M83513/03-H02* MKS-**--100P6G M83513/03-03* MKS-**-- 9P6G M83513/03-03* MKS-**-- 15P6G M83513/03-03* MKS-**-- 21P6G M83513/03-D03* MKS-**-- 25P6G M83513/03-03* MKS-**-- 31P6G M83513/03-F03* MKS-**-- 37P6G M83513/03-G03* MKS-**-- 51P6G M83513/03-H03* MKS-**--100P6G M83513/03-04* MKS-**-- 9P6G M83513/03-04* MKS-**-- 15P6G M83513/03-04* MKS-**-- 21P6G M83513/03-D04* MKS-**-- 25P6G M83513/03-04* MKS-**-- 31P6G M83513/03-F04* MKS-**-- 37P6G M83513/03-G04* MKS-**-- 51P6G M83513/03-H04* MKS-**--100P6G M83513/03-05* MKS-**-- 9P5L4-0.5 M83513/03-05* MKS-**-- 15P5L4-0.5 M83513/03-05* MKS-**-- 21P5L4-0.5 M83513/03-D05* MKS-**-- 25P5L4-0.5 M83513/03-05* MKS-**-- 31P5L4-0.5 M83513/03-F05* MKS-**-- 37P5L4-0.5 M83513/03-G05* MKS-**-- 51P5L4-0.5 M83513/03-H05* MKS-**--100P5L4-0.5 M83513/03-06* MKS-**-- 9P5L4-1.0 M83513/03-06* MKS-**-- 15P5L4-1.0 M83513/03-06* MKS-**-- 21P5L4-1.0 M83513/03-D06* MKS-**-- 25P5L4-1.0 Military Part No. MIRODOT Part No. M83513/03-06* MKS-**-- 31P5L4-1.0 M83513/03-F06* MKS-**-- 37P5L4-1.0 M83513/03-G06* MKS-**-- 51P5L4-1.0 M83513/03-H06* MKS-**--100P5L4-1.0 M83513/03-07* MKS-**-- 9P5L5-0.5 M83513/03-07* MKS-**-- 15P5L5-0.5 M83513/03-07* MKS-**-- 21P5L5-0.5 M83513/03-D07* MKS-**-- 25P5L5-0.5 M83513/03-07* MKS-**-- 31P5L5-0.5 M83513/03-F07* MKS-**-- 37P5L5-0.5 M83513/03-G07* MKS-**-- 51P5L5-0.5 M83513/03-H07* MKS-**--100P5L5-0.5 M83513/03-08* MKS-**-- 9P5L5-1.0 M83513/03-08* MKS-**-- 15P5L5-1.0 M83513/03-08* MKS-**-- 21P5L5-1.0 M83513/03-D08* MKS-**-- 25P5L5-1.0 M83513/03-08* MKS-**-- 31P5L5-1.0 M83513/03-F08* MKS-**-- 37P5L5-1.0 M83513/03-G08* MKS-**-- 51P5L5-1.0 M83513/03-H08* MKS-**--100P5L5-1.0 M83513/03-09* MKS-**-- 9P6Q M83513/03-09* MKS-**-- 15P6Q M83513/03-09* MKS-**-- 21P6Q M83513/03-D09* MKS-**-- 25P6Q M83513/03-09* MKS-**-- 31P6Q M83513/03-F09* MKS-**-- 37P6Q M83513/03-G09* MKS-**-- 51P6Q M83513/03-H09* MKS-**--100P6Q M83513/03-10* MKS-**-- 9P6Q M83513/03-10* MKS-**-- 15P6Q M83513/03-10* MKS-**-- 21P6Q M83513/03-D10* MKS-**-- 25P6Q M83513/03-10* MKS-**-- 31P6Q M83513/03-F10* MKS-**-- 37P6Q M83513/03-G10* MKS-**-- 51P6Q M83513/03-H10* MKS-**--100P6Q M83513/03-11* MKS-**-- 9P6Q M83513/03-11* MKS-**-- 15P6Q M83513/03-11* MKS-**-- 21P6Q M83513/03-D11* MKS-**-- 25P6Q M83513/03-11* MKS-**-- 31P6Q M83513/03-F11* MKS-**-- 37P6Q M83513/03-G11* MKS-**-- 51P6Q M83513/03-H11* MKS-**--100P6Q M83513/03-12* MKS-**-- 9P6Q M83513/03-12* MKS-**-- 15P6Q M83513/03-12* MKS-**-- 21P6Q M83513/03-D12* MKS-**-- 25P6Q M83513/03-12* MKS-**-- 31P6Q M83513/03-F12* MKS-**-- 37P6Q M83513/03-G12* MKS-**-- 51P6Q M83513/03-H12* MKS-**--100P6Q M83513/03-13* MKS-**-- 9P6G M83513/03-13* MKS-**-- 1 5P6G M83513/03-13* MKS-**-- 21P6G M83513/03-D13* MKS-**-- 25P6G M83513/03-13* MKS-**-- 31P6G M83513/03-F13* MKS-**-- 37P6G M83513/03-G13* MKS-**-- 51P6G M83513/03-H13* MKS-**--100P6G Military Part No. MIRODOT Part No. M83513/03-14* MKS-**-- 9P6G M83513/03-14* MKS-**-- 15P6G M83513/03-14* MKS-**-- 21P6G M83513/03-D14* MKS-**-- 25P6G M83513/03-14* MKS-**-- 31P6G M83513/03-F14* MKS-**-- 37P6G M83513/03-G14* MKS-**-- 51P6G M83513/03-H14* MKS-**--100P6G M83513/03-15* MKS-**-- 9P6Q M83513/03-15* MKS-**-- 15P6Q M83513/03-15* MKS-**-- 21P6Q M83513/03-D15* MKS-**-- 25P6Q M83513/03-15* MKS-**-- 31P6Q M83513/03-F15* MKS-**-- 37P6Q M83513/03-G15* MKS-**-- 51P6Q M83513/03-H15* MKS-**--100P6Q M83513/03-16* MKS-**-- 9P6Q M83513/03-16* MKS-**-- 15P6Q M83513/03-16* MKS-**-- 21P6Q M83513/03-D16* MKS-**-- 25P6Q M83513/03-16* MKS-**-- 31P6Q M83513/03-F16* MKS-**-- 37P6Q M83513/03-G16* MKS-**-- 51P6Q M83513/03-H16* MKS-**--100P6Q M83513/04-01* MKS-**-- 9S6G M83513/04-01* MKS-**-- 15S6G M83513/04-01* MKS-**-- 21S6G M83513/04-D01* MKS-**-- 25S6G M83513/04-01* MKS-**-- 31S6G M83513/04-F01* MKS-**-- 37S6G M83513/04-G01* MKS-**-- 51S6G M83513/04-H01* MKS-**--100S6G M83513/04-02* MKS-**-- 9S6G M83513/04-02* MKS-**-- 15S6G M83513/04-02* MKS-**-- 21S6G M83513/04-D02* MKS-**-- 25S6G M83513/04-02* MKS-**-- 31S6G M83513/04-F02* MKS-**-- 37S6G M83513/04-G02* MKS-**-- 51S6G M83513/04-H02* MKS-**--100S6G M83513/04-03* MKS-**-- 9S6G M83513/04-03* MKS-**-- 15S6G M83513/04-03* MKS-**-- 21S6G M83513/04-D03* MKS-**-- 25S6G M83513/04-03* MKS-**-- 31S6G M83513/04-F03* MKS-**-- 37S6G M83513/04-G03* MKS-**-- 51S6G M83513/04-H03* MKS-**--100S6G M83513/04-04* MKS-**-- 9S6G M83513/04-04* MKS-**-- 15S6G M83513/04-04* MKS-**-- 21S6G M83513/04-D04* MKS-**-- 25S6G M83513/04-04* MKS-**-- 31S6G M83513/04-F04* MKS-**-- 37S6G M83513/04-G04* MKS-**-- 51S6G M83513/04-H04* MKS-**--100S6G M83513/04-05* MKS-**-- 9S5L4-0.5 M83513/04-05* MKS-**-- 15S5L4-0.5 M83513/04-05* MKS-**-- 21S5L4-0.5 M83513/04-D05* MKS-**-- 25S5L4-0.5 Revised 9-14 reference purposes only. unless otherwise specified. sia Pacific: please visit