FOR BOARD-TO-CABLE CONNECTION

Transcription

1 FOR OR-TO-LE ONNETION 230 SERIES (GENERL-PURPOSE TYPE) ISONTINUE FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 80 are available for various purposes. Various types of board-to-cable connection can be performed. iscrete-wire (WG #28, #30) I/O cables can be assembled by I or soldering. Metal covers completely protect sockets from EMI. Tails are spaced in a four-row staggered arrangement (2.54 mm mm) (0.100 in in.) for easy P board design. Insulation is UL-approved (94V-0) and is washable. SPEIFITIONS Item Operating temperature range urrent rating Voltage rating ontact resistance Insulation resistance ielectric withstand voltage Insertion force [kg max.] Withdrawal force [kg min.] pplicable P board (standard) pplicable wire (standard) 55 to V 30 mω max. ( 6 V, 0.1 ) 1000 MΩ min. ( 500 V) 750 V for 1 minute Number of Force Number of Force mm (0.063 in.) thick I: WG #28 and #30 with φ0.5 to 0.88 mm (0.019 to in.) insulation diameter. The applicable wires depend on the number of. See the descriptions of I sockets and metal covers. Soldering: WG #26 max. (reference) MTERILS Item Insulator onductor Materials Polyester (Soldering PPS), UL94V-0 opper alloy Plating ontact Terminal Gold plating Palladium plating 1

2 ORERING OE FN-23 4 P 050-G /E E: Metal type Plating and covering : Metal cover (standard cable hole type) : Metal cover with polarization (standard cable hole type) : Metal cover (wide cable hole type) : Metal cover with polarization (wide cable hole type) G: Gold plating (connector) Number of : 20, 28, 36, 50,, and 80 ody : over G: ccessory (mating guide) J: Socket K: ccessory (polarization) P: Plug Tail type etc. 0: over and accessory 1: Soldering eyelet 4: Straight 5: Right-angle 7: Insulation displacement contact 230 series Fujitsu connector PPLITIONS FN /E (over) FN-235P0 -G/E FN-234P0 -G/E FN /E (over) 2

3 RIGHT-NGLE PLUG IMENSIONS End terminal 5.7 (0.224) 2.54 (0.100) 1.27 (0.050) 0.6 (0.230) 0.8 (0.031) 0.85 (0.033) No. 3 E No. 1 No M2.5 (0.098) 0.85 (0.033) 1.15 (0.045) 17.3 (0.8) 5.5 (0.216) 10.5 (0.413) 7.3 (0.333) 0.88 (0.287) 4 (0.157) (0.075) 2 - M2.5 (0.098) 8.47 (0.333) 0.4 (.015) 3.4 (0.133) MOUNTING HOLE LYOUT Last No. 20, 28, 36,, and 80 (ontact surface) ±0.1 (±0.004 ) ±0.1 (±0.004 ) 1.27 ±0.1 (0.50 ±0.004 ) 1.27 ±0.1 (0.50 ±0.004 ) 3.7 mm max. (0.145) (omponent side) ±0.1 (0.075 ±0.004 ) Last No. 50 (ontact surface) ±0.1 (±0.004 ) ±0.1 (±0.004 ) 1.27 ±0.1 (0.50 ±0.004 ) 1.27 ±0.1 (0.50 ±0.004 ) 3.7 mm max. (0.145) ±0.1 (0.075 ±0.004 ) φ0.8 ±0.06 (φ0.031 ±0.002 ) No. 3 No. 2 No. 1 φ2.8 (0.110) φ0.8 ±0.06 (φ0.031 ±0.002 ) No. 3 No. 2 No. 1 φ2.8 (0.110) PTTERN INHIITE RES REOMMENE PNEL IMENSIONS ±0.1 (±0.004) ( ) 3.5 max. (0.137) (F + 0.5) ±0.1 (F + (0.019) ±0.004 ) R1.5 ±0.1 (R0.059 ±0.004 ) 8.3 ±0.1 (0.236 ±0.004 ) ( ) ( ) 6 0 ( ) ±0.1 (0.075 ±0.004 ) ±0.1 (±0.004) Recommended panel thickness t = 1 (0.039) PRT NUMERS N IMENSIONS Number of FN-235P028-G/E FN-235P036-G/E FN-235P050-G/E FN-235P0-G/E FN-235P080-G/E (1.514) (1.714) (2.064) (2.514) (2.814) (1.278) (1.478) (1.828) (2.278) (2.587) imensions: mm (in.) (0.822) (1.022) (1.372) (46.28) (2.122) (0.650) (0.850) (1.200) (1.650) (1.950) E 26. (1.050) (1.250) (1.600) (2.050) (2.350) F (1.117) (1.317) (1.607) (2.117) (2.417) 3

4 SOLERING EYELET SOKET IMENSIONS 1.27 (0.050) End terminal 9 (0.354) 2.54 (0.100) No. 1 No. 3 No (0.216) (0.718) 5 (0.196) No. 2 No. 3 No. 1 PRT NUMERS N IMENSIONS Number of FN-231J020-G/E FN-231J028-G/E FN-231J036-G/E FN-231J050-G/E FN-231J0-G/E (0.757) (0.957) (1.157) (1.507) (1.957) imensions: mm (in.) (0.450) (0.650) (0.850) (1.200) (1.650) (0.614) 20. (0.814) (1.014) (1.364) (1.814) ONNETOR OVER FN-230 -/E FN-230 -/E FN-230 -/E FN-230 -/E : Number of 4

5 METL OVER [230 SERIES (GENERL-PURPOSE), 230R SERIES (ONFORMING TO SSI) N 240 SERIES (GENERL-PURPOSE)] IMENSIONS 12.0 (0.472) 10.0 (0.393) 32.5 (1.279) SHPE EPENING ON THE NUMER OF ONTTS 20, 28, 36, 50 and PRT NUMERS N IMENSIONS Number of FN /E FN /E FN /E FN /E FN /E FN /E FN /E FN /E FN-2300-/E FN-2300-/E (1.139) (1.350) (1.539) (1.899) (2.339) imensions: mm (in.) (0.852) (1.032) (1.232) (1.582) (2.032) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 5

6 METL OVER WITH POLRIZTION [230 SERIES (GENERL-PURPOSE) N 240 SERIES (GENERL-PURPOSE)] This metal cover prevents a connector from being incorrectly inserted when two or more connectors with the same number of are mounted on a P board. Use the metal cover together with the polarization guide. IMENSIONS 32.5 ( ) 7.5 (0.295) 12.0 (0.472) 10.0 (0.393) E (0.055) 0.4 (0.015) Rivet φ1.95 (0.076) φ3 (0.118) : X801 Purchase a rivet if necessary. SHPES OF MIN OY EPENING ON THE NUMER OF ONTTS and 36 50,, and 80 PRT NUMERS N IMENSIONS Number of FN /E FN /E FN /E FN /E FN /E FN /E FN-2300-/E FN-2300-/E FN /E (1.139) (1.339) (1.539) (1.899) (2.339) (2.639) imensions: mm (in.) (0.852) (1.032) (1.232) (1.582) (2.032) (2.322) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 6

7 PPLITIONS Panel (1 mm (0.04 in.) thick) FN-235P0 -G/E Panel (1 mm (0.04 in.) thick) FN-237J0 -G/E (onnector body) FN /E (over) Polarization guide FN-230K0 ontact guide FN-230G0 Rivet X801 PRT NUMERING FOR POLRIZTION OVER VRITIONS (WITH RIVETS) When specifying the positions of rivets for polarization, specify the part number as follows: for polarization: Specify # at the end of the part number. FN /E # -/E Letter: letter for the rivet position. Number: number for the rivet position. ommon symbol Example: FN /E #2 -/E #2 indicates that rivets ( X801) are placed at positions 2 and on the cover with a riveting tool (FN- 230T-T001/H). Standard specifications of rivet positions for polarization E 1E Riveting tool (FN-230T-T001/H) FN-230O -/E #2 -/E 7

8 ESSORY (UST P FOR PLUG) [230 SERIES (GENERL-PURPOSE) N 240 SERIES (GENERL-PURPOSE)] Used to prevent dust from entering the contact section of a plug connector. IMENSIONS 10 (0.393) 9 (0.354) 5.3 (0.019) 0.5 (0.019) 4.2 (0.165) 5 (0.196) 1 (0.039) 0.7 (0.027) 3.2 (0.125) 5.7 (0.224) FUJITSU PRT NUMERS N IMENSIONS Number of FN FN FN FN FN (0.614) 20. (0.814) (1.014) (1.364) (1.814) imensions: mm (in.) (1.003) (1.203) (1.403) (1.753) (2.203) (0.393) (0.393) (0.393) (0.590) (0.787) PPLITIONS FN-235P0 -G/E ust cap FN

9 LE SSEMLY TOOLS The following tools are needed to assemble connectors. able aligner (semiautomatic cable aligner or hand tool) I tool The tools shown below can also be used for the 230R/240/240R series. 1. able ligner ody/ontroller FN-237J FN-237R FN-M562-/ FN-247J FN-247R xxx indicates the number of. Semiautomatic cable aligner ed daptor FN-K560--xxx FN-P560-2/ FN-K560-R-xxx FN-K560-K-xxx FN-P560-2/J FN-K560-J-xxx Hand tool FN-237T-T062/H FN-247T-T061/H 2. Insulation isplacement onnection (I) tool FN-237J FN-237R FN-237 FN-247J FN-247R FN-247 Hand press FN-237T-T109/H Head/Table FN-237T-T064/H FN-237T-T067/H FN-237T-T075/H FN-247T-T066/H FN-247T-T0/H FN-247T-T077/H able aligner Insulation displacement contact (I) tool 9

10 Semi-utomatic Tools able ligning Machine Main ody (FN-M , FN-M ) over 2 over 1 Wires lamp lever pplicator Sinking comb lamp section pplicator Stand able key ed 1. Set the applicator on the stand. Set covers 1 and 2 in the applicator. 2. Push the wire into the sinking combs. 3. Set the applicator onto the installation table and begin cable alignment Head (FN-H550-1/) Stand (FN-550) Lock Lever Handle Guide Stopper pplicator (FN-550-1/-xxx) I Tool (FN-237T-T109/H, FN-237T-T067/H locator) 4. Take the covers off the applicator. 5. Put covers together and pre-assemble them to the connector body. 6. onduct final aaembly as shown. SOKET: FN-237J***-G/E (***: 020, 028, 036, 050, 0,080) Pos No. pplied Wire (wire ia.: mm [ in.]) onnector Part number Hand Tool able ligner Semi-uto I Tool 20 #28 to #30 (0.5 to 0.65) FN-237R020-G/E FN-237J080-G/E FN-237T-T062/H FN-237T-T043/H (See below*) HN PRESS: FN-237T-T109/H HE & Locator: FN-237T-T067/H Semi-automatic-Medium Level ody: :FN-M Head ssembly: :FN-H550 pplicator: :FN-550-1/-***(***: 020, 028, 036, 050, 0, 080) Stand: :FN

11 Fujitsu omponents International Headquarter Offices Japan Fujitsu omponent Limited Gotanda-huo uilding 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo , Japan Tel: (81-3) Fax: (81-3) Web: North and South merica Fujitsu omponents merica, Inc. 250 E. aribbean rive Sunnyvale, U.S.. Tel: (1-408) Fax: (1-408) Web: Europe Fujitsu omponents Europe.V. iamantlaan WV Hoofddorp Netherlands Tel: (31-23) Fax: (31-23) Web: emea.fujitsu.com/components sia Pacific Fujitsu omponents sia Ltd. 102E Pasir Panjang Road #01-01 itilink Warehouse omplex Singapore Tel: (65) Fax: (65) Fujitsu omponents merica, Inc. ll rights reserved. ll trademarks or registered trademarks are the property of their respective owners. Fujitsu omponents merica, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu omponents merica, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2,