6LGH High Voltage Connectors
|
|
- Loraine Payne
- 6 years ago
- Views:
Transcription
1 LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387 mm 2 ] of mounting surface; occupies less than.750 cubic inch [.229 mm3] of volume per mated pair Quick connect/disconnect design Resilient silicone rubber insert in plug half provides positive interfacial seal for mated connector Withstands 10 KV hipot test Housing styles for potting, chassis slot (channel) mounting, panel mounting and free-hanging applications Lettered positions for easy circuit identification Size 22, gold plated contacts with 5 ampere rating accommodate 28 to 22 WG [0.08 to 0.4 mm 2 ] wire onnectors pre-assembled with leads, fully potted and tested 6 KV at 70,000 ft. [21,3m]; -67 to +257 [-55 to +5 ]operating storage temperature lame retardant, glass reinforced thermoplastic polyester housings standard color, black Mounting rackets, Slip-on (or ommercial or Military ssemblies with slotted housings) Part Number Two,.106 [2.69] ia. Mounting Holes Part Number One,.106 [2.69] ia. Mounting Hole MP Subminiature High Voltage onnectors are designed for use in electronic high voltage circuits, especially in critical applications and harsh environments. It is exceptionally lightweight and compact. an be operated within a temperature range of -67 to 257 [-55 to +5 ] and up to 6 KV at an altitude of 70,000 feet [21,3 meters]. The connector incorporates many features for electrical, mechanical and environmental integrity. Tyco lectronics supplies the Subminiature High Voltage onnector in a 6-position size, preassembled with silicone or TLON insulation. or optimum versatility, connector housings are available for 180 (straight) or 90 (rightangle) rear-entry wiring and in a choice of styles for potting, chassis-slot (channel) mounting, panel mounting and free-hanging applications. Panel-mounted versions can be furnished either with separate slip-on metal mounting brackets or with a molded mounting flange that is an integral part of the connector. ll connector styles are fully potted (and have been tested for environmental integrity and reliability of performance). Material and inish Housings and Potting Shells Thermoplastic polyester, glass-filled, flame retardant; standard color, black ontacts eryllium copper; plated [ ] min. gold per MIL- G-45204, over [ ] min. nickel per QQ-N-290 Mounting rackets arbon steel, nickel plated 6LGH High Voltage onnectors TLON is a trademark of. I. upont de Nemours and ompany. atalog imensions are in inches and imensions are shown for US: South merica: Revised 8-06 millimeters unless otherwise reference purposes only. anada: Hong Kong: are metric equivalents. to change.. merica: UK:
2 LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors (ontinued) Plug ssemblies and Kits lying Leads ssembly ssembly with Lead Length 22 WG Silicone ± ± ±.50 ± Ø.093 [2.] Typ..50 ±. [.7 ± 0.4] [ ] Typ. [15.] [.70] Wire olor rown lue lack Molded Mounting lange ssembly Lead ssembly with ssembly with Length 22 WG Silicone WG TLON * * * * Right-ngle Kit Part ssembly Lead ssembly with ssembly with Number Length 22 WG Silicone WG TLON Kit with lange Slotted Version with Potting Shell Kit Part ssembly Lead ssembly with ssembly with Number Length 22 WG Silicone WG TLON * TLON is a trademark of. I. upont de Nemours and ompany. atalog imensions are in inches and imensions are shown for US: South merica: Revised 8-06 millimeters unless otherwise reference purposes only. anada: Hong Kong: are metric equivalents. to change.. merica: UK:
3 LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors (ontinued) Receptacle ssemblies and Kits Slotted Kit Part ssembly Lead ssembly with ssembly with Number Length 22 WG Silicone WG TLON * * olor oding Leads are color coded as tabulated here. Other color leads can be used in custom assemblies. Wire olor rown lue lack White Molded Mounting lange Right-ngle.106 [2.69] ia. Typ. lange can be placed elsewhere on housing. onsult Tyco lectronics. Kit Part ssembly Lead ssembly with ssembly with Number Length 22 WG Silicone WG TLON * * * LGH High Voltage onnectors Kit Part ssembly Lead ssembly with Number Length 22 WG Silicone TLON is a trademark of. I. upont de Nemours and ompany. olor oding Leads are color coded as tabulated here. Other color leads can be used in custom assemblies. Wire olor rown lue lack White atalog imensions are in inches and imensions are shown for US: South merica: Revised 8-06 millimeters unless otherwise reference purposes only. anada: Hong Kong: are metric equivalents. to change.. merica: UK:
4 LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors (ontinued) Plug ssemblies Posts ia..025 [0.64] ±.025 [± 0.64].5 [3.17].719 [18.26].74 [18.8].030 ±.005 [0.76 ± 0.13] Molded Slug Silicone Rubber See Note.250 [6.35] [.70].093 [2.37] [26.97].875 [22.23].5 [3.17] im Part Number Note: ia..106 [2.69], -2 and -3 inserts are #2-56. Plug ssemblies with lying Leads ±.50 [±.7] [ ] Typ. [15.] [.70] im. Lead Letter Part olor avity Number rown * lue lack Mounting rackets These brackets are for mounting commercial or military assemblies with slotted housings. They are not included in connector kits, nor with assemblies, and they must be ordered separately. Part Number Part Number lying Leads.063 [1.60] Typ..50 ±. [.7 ± 0.4] # WG R TLON Insulated Typ. [ ] ±.50 [381.0 ±.7] [15.] Molded Slug Mat'l: Silicone Rubber Part Number [.70] Housing Mat'l: Polyester Mldg. mpd. olor: lack Wire olor rown lue lack 6-44 TLON is a trademark of. I. upont de Nemours and ompany. # WG TLON Insulated Lead Wire.093 [2.] O.. Ref ±.50 [7.0 ±.7] Socket No. Wire olor lack rown No Lead atalog imensions are in inches and imensions are shown for US: South merica: Revised 8-06 millimeters unless otherwise reference purposes only. anada: Hong Kong: are metric equivalents. to change.. merica: UK: [15.] Silicone Rubber.40 Part Number [.7]
5 LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors (ontinued) Receptacle ssemblies Slotted ssembly ssembly with ssembly with Lead Length 22 WG Silicone WG TLON * Right-ngle [ ] [ ] [15.].38 ±. [9.7 ± 3.0].00 ±.50 [ ±.7] [.70] [26.97].870 [22.10] #22 WG Silicone Insulated Lead Wire Part Number RoHS Part Number [6.35] Ø.016 [2.69] Typ. ssembly ssembly with ssembly with Lead Length 22 WG Silicone WG TLON * * LGH High Voltage onnectors atalog imensions are in inches and imensions are shown for US: South merica: Revised 8-06 millimeters unless otherwise reference purposes only. anada: Hong Kong: are metric equivalents. to change.. merica: UK:
Miniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationToggle Switches, A Series, Part Number Matrix
Toggle Switches, A Series, Part Number Matrix "A" SERIES DESIGN FEATURES Toggle Machined brass, heavy nickel plated. Bushing & Frame Rigid one-piece die cast, copper flashed, heavy nickel plated. Fixed
More informationca_b1-b66.qxd:layout 1 2/9/11 7:58 PM Page 1 Mini Circular
Microminiatuare ircular -.050" ontact pacing MIO- MIO- microminiature circular connectors are rugged yet lightweight - and meet or exceed the applicable requirements of MI- T-8353. pplications include
More informationmicro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999
micro38999 SERIES High Vibration Miniature onnectors Qualified ccording MIL-TL-38999 8, 8 & 8LT Series Presentation The micro38999 Series (8, 8 and 8LT ranges) is made to meet a new generation of applications
More informationMICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction
MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The
More informationWall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.
L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting
More informationA Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
More informationKevlar Reinforced High Pressure PTFE Hose Assemblies AE319, AE334, AE355
eroquip evlar Reinforced High Pressure PTFE Hose ssemblies E319, E334, E355 Lightweight Integral brasion Resistance Qualified to Industry Standards ompatible with erospace Fluids vailable for 3000, 4000
More informationD*MA Standard Density Crimp Contact Cable Connector
annon rimp, Size 20 *M Standard ensity rimp ontact able onnector or contact cavity arrangements, see pages -44. or panel cutouts, see page -49. ngaging ace Shell Size ayout ual Through Hole loat Mount
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationPKD Series - Page K14. Alcoknob. Alcoknob
lcoknob Series - Page 4 Series - Page 5 Series - Page 6 LNS Series - Page 8 N Series - Page 8 P Series - Page 13 P Series - Page 14 lcoknob atalog 1308390 imensions are in inches imensions are shown for
More informationMIL-DTL Series I, II, III Connectors
LTL38 Series,, onnects Perfmance and aterial Specifications TRLS FSHS luminum Receptacle Grounded Plug luminum alloy luminum alloy* nsulat High grade plastic High grade plastic ontacts opper alloy, gold
More informationDATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
More informationHow to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION
hermetically sealed connectors are designed to meet environmental conditions of extreme pressure differential. These connectors are part of the ITT Cannon D Subminiature series and are qualified to MIL-C-24308
More informationAmphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
More informationMIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
More informationπ network filter insertion loss - attenuation (db)
MI/RFI Applications All electronics equipments Standards oncerned equipments : F, V, MIL-ST 461, GAMG 13 Typical performance capacitive filter π network filter escription Filter connectors have been developed
More informationPCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More informationP Series. UL Recognized CSA Certified VDE Approved. P Series. CORCOM Product Guide
OROM Product Guide The HMELEON daptable Module for General, High Performance or Medical pplications UL Recognized S ertified VE pproved PS PS000SS30 PS The P series power entry module offers fuller flexibility
More informationMIL-DTL Micro-D Connector
Specication MIL-TL-83513 Micro- onnector MIL-TL-83513 Micro- onnector R04J Series rimp ontact Type nvironment temperature: ~ Vibration: 10z~2000z, 196m/s Random vibration: Power spectrum density 0.4 z
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationIndustrial Connectivity and Control Products Index. Section G
Section G Industrial onnectivity and ontrol Products Type Page Number Mini-Quick ontrol onnectors G-2 Features and enefits G-3 2-6 Pole Plugs G-4-2-6 Pole Receptacles G-6-7 7-12 Pole Plugs G-8-9 7-12 Pole
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More informationDT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30
ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories
More informationKDB / VG Series
/ V 9523 Series ontents Introduction........................... 2 onnector design...................... 2 Technical data......................... 3 ounting dimensions.................. 5 ow to order..........................
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
More informationRack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
More informationAmphenol Industrial Threaded AIT
mphenol Industrial Threaded IT IT Series is a low cost, MILDTL5015 threaded type connector for use in harsh environmental conditions. This popular, cylindrical connector is particularly well suited to
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationEZ-LIGHT Indicators 4-Color, Multi-Function
EZ-LIGHT Indicators -olor, Multi-Function Datasheet D-Operated Indicators with olors and Multiple Flashing Frequencies Rugged, cost-effective. and easy-to-install indicators available in K0, K0 Flat Pack,
More informationRack & Panel Rectangular Miniature Subminiature Environmental Removable Contacts
Rack & Panel Rectangular Miniature Subminiature Environmental Removable ontacts Table Of ontents Series Description Page MR Miniature Rectangular onnectors With Removable ontacts 2-10 X External Miniature
More informationMIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
More informationIMPACT Backplane Connector System
IMPT ackplane onnector System isclaimer While T has made every reasonable effort to ensure the accuracy of the information in this catalog, T does not guarantee that it is error-free, nor does T make any
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More informationSpecial Products. Weather-Pack. Sleeve Pin. Cable Seal
S ross Sectional View Sleeve Pin Hinged TP Hinged TP able able Seal onnector Seal able Seal able Female onnector ssembly Male onnector able Seal Female Terminals (Sleeve) Sealed* Sleeve Part # able Range
More informationConnection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
More information(Follow Amphenol Pcd to keep up with our Connecting Solutions)
mphenol Pcd (ollow mphenol Pcd to keep up with our onnecting Solutions) Products ackshells able Solutions ircular ield us Junction Modules Luminus Series Military udio/power Military ommercial erospace
More informationAMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationMicrominiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne
More informationMicro-D Metal Shell -.050" Contact Spacing
Micro Metal Shell.050" ontact Spacing Specifications connectors are used in applications requiring highly reliable, extremely small, lightweight connectors with higher density contact configurations than
More informationSpecifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0.
05 rimp Type onnectors For Mating To Mate With ss y Pitch onnectors Wire to oard onnectors connectors are miniature type connectors which were developed with concepts for versatile usage for P.. board
More informationShrink Boots Straight, Long Tail, 90, 45 and USB for Series 811 Connectors
809S060, 809SL060, 809060, 809060 and 809SU060 Straight, Long Tail, 90, 45 and US for onnectors Protect Your able Harness with heat-shrinkable boots. These easy-to-use boots provide excellent electrical,
More informationConnectorized Cables Category 2, 3, and 5
ategory 2, 3, and 5 D s connectorized cables are designed for voice and intermediate speed data applications. Each cable assembly is equipped with either two connectors or one connector and one stub. Specialty
More informationDynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
More informationIPT SE and IPT Series
IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More information8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationµcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the
More information*HDMI-STYLE WEATHERTIGHT CONNECTORS *HDMI-STYLE WEATHERTIGHT CONNECTORS NPB C714
601 E WILDWOOD VILLA PARK, IL 60181 P: 630.834.7504 F: 630.834.8540 WWW.CONXALL.COM FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when panel connector is rear mounted and mated to the cable)
More informationMCON INTERCONNECTION SYSTEM
MON INTERONNETION SYSTEM for the utomotive Industry TE UTOMOTIVE /// MON Interconnection System INNOVTIVE TEHNOLOGIES TE onnectivity (TE) is a leader in automotive connectivity and sensor technology. Our
More informationAmphenol Amphenol Pcd
igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems MIL-T-1714 Series I lass MIL-T-1714 Series I unction Modules QPL-approved MIL-T-1714
More informationDT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW
T amily Overview UTSH T, TM, and TP series environmentally sealed connectors are designed for cable to cable and cable to board applications. The T connectors are used in harsh environment applications
More informationCustom Tubular Solenoids
Custom Tubular Solenoids KEY FEATURES Designed and built to customer requirements Push, pull or combination motion Broad operating temperature range Multiple termination and mounting options 200 C magnet
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
More informationDTP Series : Contacts (Open Barrel) Type Barrel Type GA Size
Deutsch Connectors DTP Series Deutsch s DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed
More informationIntegrated Backshell Fire Proof Connector
8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More informationDT04 08P + W8P
Deutsch Connector Assortment Flip Kit *763354 This assortment contains 574 pieces/sets of widely used Deutsch Connectors. Flip Kits are handy both in the shop and the service vehicle. They are portable,
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationW Electrical Connector Subsea / Underwater / Marine
www.re-marine.com W Electrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and Lights Underwater Thruster Strain Termination Key eature:
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied
More informationAmphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB
ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20
More informationMDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features
MDM Applications Features MIL-DTL-83513 STYLE As the result of the miniaturization of today s sophisticated electronics where more and more electronics are being packed into smaller and lighter electronic
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More informationMCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
More informationHeavy Duty Cylindrical MIL-C QWLD
20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle
More informationAerospace Kevlar Reinforced High Pressure Teflon Hose Assemblies AE319, AE334, AE355
erospace evlar Reinforced High Pressure Teflon Hose ssemblies E319, E334, E355 Lightweight Integral brasion Resistance Qualified to Industry Standards ompatible with erospace Fluids vailable for 3000,
More informationD-SUB Series. Electrical Max current rating per contact : 7.5 A. Insulation resistance : 5000 MΩ Contact resistance : 10 mω
-SU Series pplications For military and aerospace applications. s MiL- 24308 HE 501 HE 508 HE 507 haracteristics Mechanical Shell : cadmium plated steel Insulator : monothermoset and two parts thermoplastics
More informationVoltage 12V 18V 24V 36V 48V 72V 80V 96V 120V 144V Color Yellow Orange Red Gray Blue Green Black Brown Purple White PRODUCT INFORMATION
S onnector amily TURS Prevents accidental mating of components operating at different voltage levels Single-piece housing and unitized construction Provides industrial quality and durability P mounted
More informationGecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
More informationMicro-D TwistPin Connectors and Accessories Product Selection Guide
Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED
DEUTSCH ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED Reliable and Versatile Range of Connectors for Harsh Environment Aerospace and Military Applications CONTENTS Introduction 03 Technical
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationGecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.
onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts
More informationGlenair Environmental and Hermetic MIL-DTL Type Bulkhead Feed-Thrus
lenair Environmental and Hermetic MIL-DTL-38999 Type ulkhead eed-thrus SETION E TALE O ONTENTS LENAIR MIL-DTL-38999 TYPE ULKHEAD EED-THRUS: MIL-DTL-38999 Type ulkhead eed-thru Product eatures...e-1 231-103-H7
More informationFuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
More informationD-73P disconnect and bypass switches
Switches atalog Data 008005EN Supersedes pril 2016 OOPER POWER SERIES D-73P disconnect and bypass switches ontents Description Page D-73P disconnect switch....2 D-73P3 bypass switch....5 D-73P-D cutout
More informationPlug MIL-DTL Type Fiber Optic Connector For use with MIL-T-29504/4 & /5 Termini
180-060-06 Plug MIL-TL-38999 Type iber Optic onnector or use with MIL-T-29504/4 & /5 Termini MIL-TL-38999 OW TO ORR: 180-060 XW 06--8 P N asic Number inish Symbol (Table II) onnector Style Alternate Key
More informationAMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
More informationKulka Military Class (A-A-59125) / (MIL-T-55164*)
(--59125) / (MIL-T-55164*) Military Class: Closed ack Supercedes MIL-T-59125 These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting
More informationSystem description/overview/kit overview...5 Assembly procedures...7. Channels Solid channel with cover...10 Slotted channel with cover...
Introduction System description/overview/kit overview...5 ssembly procedures...7 hannels Solid channel with cover...10 Slotted channel with cover...10 Fittings hannel splice...12 Fitting splice...12 Horizontal
More informationFILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
More informationnterconnect compatibility new SEALED CONNECTORS harsh environment dual seals for harsh environments ergonomic locking tab for easier mating
new harsh environment SEALED CONNECTORS nterconnect dual seals for harsh environments ergonomic locking tab for easier mating compatibility AT Series plug wedges ensure a proper seal placement and contact
More informationThe Centi Line -.075" Contact Spacing
The enti Line -.075" ontact Spacing The annon enti connectors are especially suitable for commercial applications such as computers, instrumentation, communications and audio equipment. They are available
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
More informationKIP Solenoid Selection
KIP Solenoid Selection Solenoid Selection 1/2" NPT onduit dapter Nut Housing Stop Orifice (Normally Open) Spring Loaded Top Seal oil Plunger Spring, Plunger, tn ottom Seal Guide ssembly Shading ing ( Only)
More information