QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

Size: px
Start display at page:

Download "QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS"

Transcription

1 QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017

2 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage electrical power distribution is a critical component of the 100% electric Tesla Roadster. The reliable distribution of electrical energy from the car s lithium-ion energy storage system to the vehicle s motor, electronic control module, HV system, transmission and regenerative braking unit depends on a high-performance wiring system made up of high-temperature shielded conduit and ruggedized reverse-bayonet power connectors all made by Glenair. Glenair is on the forefront of innovative efforts to advance the reliability and performance of electric vehicles. Glenair power connectors, cables and conduit are deployed in high-voltage power management and distribution applications for systems as demanding as military vehicles and as fast as the Tesla Roadster. Worldwide Sales: Glenair Italia S.p.. - ologna Headquarter, Tel: sales@glenair.it Italy Sales: Glenair Italia S.p.. - Milan Sales Office, Tel: sales@glenair.it North merican Sales: Glenair onnecticut, Tel: sales@glenair.com -

3 2008 Glenair, Inc. GE ode Series Printed in U.S.. Qualified ayonet-lock Interactive atalogue Section Index Table of ontents Introduction Introduction to Product Line Overview ross References Technical Data How to Order Insert rrangements Tables, Front Views and Rotations fron page -1 to page -23 ssemble from pages -1 to page -32 ccessories and Tools Protective overs and able lamps rimping Tables and Tools from page -1 to page -22 Part Number Index Series PogoPin PRT NUMER INDEX N N N N W W W W X X X X Y Y Y Y Z Z Z Z N N N N W W W W X X X X Y Y Y Y Z Z Z Z N N N N ll dimensions in millimeters (mm). Information subject to change without notice. GLENIR, IN IR WY GLENDLE, FX W W W W X X X X Y Y Y Y Z Z Z Z N N N N W W W W X X X X Y Y Y Y Z Z Z Z H S S060-3H L L L L L L L omplete Listing of atalog Pages - Interactive Glenair Product Warnings from page D-1 to page D-3 D

4 VG96929 QULIFIED GLENIR VG96929 REVERSE YONET SINGLE POLE ONNETORS High-urrent, Low-Volge Power for Ruggedized Military and Insustrial pplications The Glenair High Density Fiber Optic onnection System is designed for applications that require reduced size and weight as well as outstanding optical and environmental performance. The System offers insertion loss values less than.5d (typical loss for Glenair termini is.3 d). Dense cavity spacing is acheived with an innovative Front Release terminus design and accomodation for M85045/16 cable. Glenair, Inc ir Way Glendale,

5 ayonet-lock ssemblies Product Line Overview Introduction Qualified Power and Signal, for Military Vehicles. Harsh pplication Environments Glenair s Reverse ayonet Power and Signal onnector is ideally suited for all inter-car, under-car, trainline and other rugged transportation applications. The connector family is also utilized in industrial and military applications such as ground vehicles and electric cars. Qualified to, the reverse bayonet coupling provides easier and faster coupling, especially when the connector is situated in an awkward or hard to reach location. The connector s high resistance to vibration and shock provides reliable mating in even the most rigorous application environments. Environmental protection to IP67 levels provides additional reliability. Rugged Materials Glenair s connector series is fabricated in aluminum alloy with surface plating IW QQP-416 Type II lass 3. Easy-to-terminate crimp contacts are made from silver plated copper alloy. The standard insert material is synthetic rubber which provides reliable performance in temperature ranges from -55 to Intermateability Glenair s Reverse ayonet Power and Signal onnector is a reverse bayonet coupling version of the familiar threaded coupling MIL-DTL Insert arrangements mimic the 5015 family of configurations, including numerous supported contact sizes, connector types and arrangements. Glenair s onnector is interchangeable and intermateable with the wide range of industry-standard reverse bayonet connectors designed around MIL-DTL-5015 and/or qualified to. Fast, Easy ayonet oupling: 1/4 Turn Environmental and Non-Environmental Versions ll Shell Styles: Plug, Square Flange, etc. High Shock and Vibration Resistance ontact Sizes from #16 to #0 in more than 63 Insert rrangements udible and Visual oupling Indicators rimp ontacts Intermateable with Glenair ITS Series 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

6 Introduction ayonet-lock ssemblies pplications Glenair s qualified reverse bayonet-lock connector series is based on the MIL-DTL-5015 standard, and shares many of the same insert arrangements, shell dimensions, supported contacts and electrical performance ratings as MIL-DTL-5015 and Glenair s commercial equivalent product line, the Series ITS. The 3-point bayonet coupling mechanism provides easy mating and positive locking resistance to vibration, shock, and other connector decoupling forces in general duty and environmental interconnect systems such as railway cars, locomotives, industrial controls, factory robotics, military vehicles and other general electronic applications. Insulators Shells ontacts omponent Materials Synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R-3065 luminum alloy standard supplied with an olive green cadmium finish IW QQ-P-416 rimp contacts in silver plated and copper alloy EMI and Environmental pplications Series connectors are perfectly suited for use in rugged applications where EE compliance directives for electromagnetic compatibility are required. complete range of EMI shield termination accessories are available for both overall as well as individual wire shields. Equipped with the appropriate backshells and environmental sealing, coupled connectors are submersible for 48 hours up to a depth of two meters. onnector ccessories Many of the connectors come already paired with selected backshell accessories for most application requirements. See the accessory descriptions on the opposite page for more information. full range of additional connector accessories including dust caps and EMI gaskets are also available. Please contact the factory for additional information. Glenair s website, also has complete information on these products, as well as other ruggedized power and signal connectors Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

7 ayonet-lock ssemblies vailable omponents Introduction offers a simplified ordering and part number format that combines the five standard connector shell styles with the most popular backshells and connector accessories. vailable connector shell styles, backshell types and accessories include: onnector Shell Styles Front Panel Mount Square Flange Receptacle with ccessory Threads Rear ox Mount Square Flange Receptacle with No ccessory Threads Rear ox Mount Square Flange Through ulkhead Receptacle Straight and 90 Plug onnector with ccessory Threads In-Line Receptacle Integrated ackshell Types Type D, E, F, J1 and J2: asic backshell with cable clamp, bushing and wire sealing grommet. Types E1, K, H, and L: ackshell for the termination of flexible wire protection conduit. Includes wire sealing grommet. Types G, T, U1 and U2 Simple Heat-Shrink oot termination backshell. Includes wire sealing grommet. Types M, N1, N2, R1, S1 and S2 EMI/RFI shield termination backshell with external lip for the attachment of for heat shrink boots. Includes wire sealing grommet. ccessories Plug and receptacle protective covers with various lanyard styles for panel attachment Plug and receptacle covers with various lanyard styles for cable attachment onductive and non-conductive gaskets for panel mount connectors Dummy stowage receptacles able clamps and Neoprene bushing 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

8 Introduction ayonet-lock General Duty rimp ontact onnector ross Reference onnector ross Reference D E E1 K F G T H L J1 J2 M N1 N2 R1 S1 S2 U1 U2 V Glenair Series ITS IT 4102 IT 4103 IT 4103 FP IT 4102 PP ITS 4102 PPFP ITS 4106 FV ITS 4108 F ITS 4108 R ITS G 4108 R IT 4101 FV ITS 4106 GR ITS G 4106 GR ITS 4106 R ITS G 4106 R IT FV IT FP FV ITS G 4106 SP IT SP IT SPFP ITS G 4106 R1 IT S1 IT S2 IT GR IT GR FP IT4101GR The Glenair reverse bayonet-lock connector series features a 3 point bayonet coupling mating interface with stainless steel coupling pins for advanced durability. Resilient closed entry inserts provide outstanding dielectric performance and environmental protection. Individual wire sealing grommets elevate the environmental protection rating to IP67. onductive metal shells and plating provide a reliable ground plane for EMI applications when connectors are combined with appropriate shield termination backshells. Ground springs are also available in selected plug versions to further enhance EM. Shells are keyed with three total alternate key positions. series and equivalent connectors detailed in the catalogue, consist of: 16 styles of connectors/accessory assemblies 12 shell sizes 16 contact Sizes: #16, #12, #8, #4 and #0 in standard WG. #10, #15, #25, #100-60, #160, and #500 in metric. 82 insert rrangements with 1 to 61 contacts Standard contacts: rimp 5 vailable alternate insert rotations The Glenair Series ITS connector family is the company s commercial equivalent to the VG qualified products presented in this catalog. Series ITS offers a much broader range of connector and backshell assemblies as well as additional plating options, fire-resistant inserts, optional solder-cup contacts and other variations. ustomers are advised to select versions of this reversebayonet connector series when qualification to is a requirement. For non-vg applications, customers will appreciate the broader range of options available in the Series ITS. ccessory ross Reference VG95324 ccessories Glenair Series ITS K IT 02K K IT 06T K IT 06K KR IT 02T 0D ITS 05 KK IT KT IT 3420 D-1 IT DH-1 IT Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

9 ayonet-lock rimp ontact onnector Technical Data Introduction Metric WG ontact Information Rated urrent at 20. ontact Resistance mm 2 Wire Size WG mω S S mω mω mω mω mω Rated urrent (mp) ttenuation (d) mbient Temperature Shield ttenuation For onnector Styles K, L, M, R1 and T lass Service Rating Minimum ontact Spacing Test Voltage Vac RMS mm 1050 V mm 1600 V mm 2500 V mm 3000 V Insulation Resistance: 5 x 10 3 MΩ Frequency (MHz) 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

10 Introduction ayonet-lock General Duty rimp ontact (MIL Type) Master How to Order ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted for Standard Version 1 - onnector Less ontacts 32-6 S 1 N 1 asic Part Number P - Pin contacts S - Socket contacts P/S - For Style 1 and 2 ulkhead Feed-Thru lternate Insert Positions N - X - Y - Z onnector Style - Front Panel Mount Square Flange Receptacle - No ccessory Threads 1 - Rear Panel Mount Square Flange Receptacle -No ccessory Threads 2 - Rear Panel Mount Square Flange Receptacle -Thru Holes 1 - ulkhead Feed-Thru Receptacle with Threaded Holes 2 - ulkhead Feed-Thru Receptacle with Thru Holes D - Straight Plug with able lamp and ushing E - 90 Plug with able lamp and ushing E1-90 Plug without lamp and ushing F - In-Line Receptacle with able lamp and ushing G - Straight Plug with Shrink oot dapter H - Straight Plug without able lamp and ushing J1 - Wall Mount Receptacle with able lamp, ushing and Threaded Holes J2 - Wall Mount Receptacle with able lamp, ushing and Thru Holes K - 90 Plug with Grounding Fingers without able lamp and ushing L - Straight Plug with Grounding Fingers without able lamp and ushing M - Straight Plug with EMI Shrink boot ackshell and Grounding Fingers N1 - Wall Mount Receptacle with EMI Shrink boot ackshell & Threaded Holes N2 - Wall Mount Receptacle with EMI Shrink boot ackshell & Thru Holes R1 - Straight Plug with 360 RF Shielding - EMI Shrink boot ackshell S1 - Rear Wall Mount Receptacle with EMI/RFI ackshell oot dapter S2 - Rear Wall Mount Receptacle with EMI/RFI ackshell oot dapter; Thru Holes T - Straight Plug with Shrink oot dapter and Grounding Fingers U1 - Fixed onnector with Mounting Flange and oot dapter U2 - Fixed onnector with Mounting Flange and oot dapter; Thru Holes V - In-Line Receptacle with Heat Shrink oot dapter 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

11 Glenair Series ITS ommercial Equivalent Product Line Introduction onnector/ackshell lass - Non-Environmental GR, SP - Environmental (Includes Wire Sealing Grommet) FV, F, R, RS - Environmental (Includes Wire Sealing Grommet and ompression Ring) Shell Size and Insert rrangement ccessory Description ode Reverse ayonet oupling onnector IT for the Receptacle ontact Gender P - Pin S - Socket Mod ode Option ITS G FK P Y N0 R XXX Plug Grounding Fingers Omit for Standard ontact Type 41 - rimp Material Option FK - Stainless Steel Passivate M - Marine ronze Omit - For Standard luminum lternate Insert Rotation Omit for Normal R - WG ontact RM - Metric ontacts onnector Shell Styles 00 - Front Panel Mount Square Flange Receptacle with ccessory Threads 01 - In-Line ylindrical Receptacle with ccessory Threads 02 - Front Panel Mount Square Flange Receptacle No ccessory Threads 03 - Rear Panel Mount Square Flange Receptacle No ccessory Threads Rear Panel Mount Square Flange Receptacle with ccessory Threads Rear Panel Mount Square Flange Receptacle with 90 ackshell 06 - Straight ylindrical Plug onnector with ccessory Threads 07 - Rear Panel Mount Jam Nut Receptacle No ccessory Threads Rear Panel Mount Jam Nut Receptacle with ccessory Threads Rear Panel Mount Jam Nut Receptacle with 90 ackshell 08 - ylindrical Plug onnector with 90 ackshell 26 - Square Flange Panel Mount Plug 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

12 Introduction ontact rrangement Tables ONTT RRNGEMENTS ONTT NUMER SERVIE RTING ONTT RRNGEMENT TLE ONTT SIZE METRI TYPE WG TYPE S S-16 10SL SL S S S S S S S S VG Qualified # Do Not Use with Styles 1 and Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

13 ontact rrangement Tables Introduction ONTT RRNGEMENTS ONTT NUMER SERVIE RTING ONTT RRNGEMENT TLE ONTT SIZE METRI TYPE WG TYPE S S # VG Qualified # Do Not Use with Styles 1 and Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

14 Introduction Insert Rotations Insert Rotations Tables INSERT ROTTION TLE ONTT ROTTIONS DEGREES RRNGEMENTS W X Y Z TOLERNE 10SL SL S S ± 2 14S ± 2 14S S ± 2 16S S ± 2 16S ± ± ± ± ± a 215 ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± a ± ± VG Qualified # Do Not Use with Styles 1 and 2 a Not for new design 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

15 Insert Rotations Introduction Insert Rotations Tables INSERT ROTTION TLE ONTT ROTTIONS DEGREES RRNGEMENTS W X Y Z TOLERNE ± ± ± ± ± ± ± ± ± a ± ± a ± ± ± ± ± ± ± ± ± ± ± ± ± ± a ± ± ± ± ± ± ± ± # ± ± ± a ± ± VG Qualified # Do Not Use with Styles 1 and 2 a Not for new design 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

16 Introduction ontact rrangements Front View of Pin Insert 1 ONTT rrangement ontact Size , Service Rating ONTTS rrangement 10SL-4 16S ontact Size 15S 15S pin 25 / socket 25 Service Rating ONTTS rrangement ontact Size 25 60, , 0 Service Rating ONTTS rrangement 10SL-3 14S ontact Size 15S 15 1/100; 2/15 25 Service Rating ONTTS rrangement ontact Size 2/12, 1/ Service Rating ONTT SIZE METRI TYPE WG TYPE S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

17 ontact rrangements Front View of Pin Insert Introduction 4 ONTTS D D rrangement 12S-10 14S ontact Size 15S 15S 2/25, 2/15 1/60; 3/25 Service Rating D 4 ONTTS D rrangement ontact Size 2/8; 2/ Service Rating D 4 ONTTS rrangement ontact Size 1/500, 3/15 60, 8 160, 4 500,0 Service Rating E 5 ONTTS E D D E D rrangement 14S-5 16S ontact Size 15S 15S 25 Service Rating ONTT SIZE METRI TYPE WG TYPE S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

18 Introduction ontact rrangements Front View of Pin Insert 5 ONTTS E E D E D D rrangement ontact Size 3/15, 2/100 3/12, 2/4 3/25, 2/500, 3/12, 2/0 Service Rating 3 2 =4; alance=3 6 ONTTS F E D rrangement 14S * ontact Size 15S 2/100, 4/15 3/8, 3/15 5/25,1/15 Service Rating D=4; alance=2 6 ONTTS rrangement ontact Size 3/160, 3/15; 3/4, 3/16 3/500, 3/25; 3/0, 3/12 4/4, 2/0 Service Rating ONTTS E F G D rrangement 16S ontact Size 15S 2/25, 5/ Service Rating ONTT SIZE METRI TYPE WG TYPE S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

19 ontact rrangements Front View of Pin Insert Introduction 8 ONTTS D F E H G H F 36-35P D G E rrangement ontact Size 25 6/25, 2/0 4/15, 4/0 Service Rating H=4; alance= ONTTS G F H J G H F J D E D E rrangement ontact Size 2/25, 7/15 3/25, 6/ /15, 1/60 Service Rating 2 2 J=3; alance=1 J=3; alance=2 9 ONTTS D rrangement ontact Size 6/25, 3/100, 6/12, 3/8 4/160, 5/15, 4/4, 5/16 4/4, 5/15 4/16, 2/12, 2/4, 1/0 Service Rating ONTTS F G E H I J D D E F G K H J E H G D J F rrangement ontact Size 15 10/16 8/16; 2/8 Service Rating, D, E, H, I, J=1;,,F,G=2 2 2 ONTT SIZE METRI TYPE WG TYPE S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

20 Introduction ontact rrangements Front View of Pin Insert 11 ONTTS rrangement ontact Size 15 2/25, 9/15 Service Rating ONTTS 13 ONTTS rrangement ontact Size Service Rating 3 1 J 14 ONTTS E rrangement ontact Size /15, 10/25 Service Rating ONTTS rrangement ontact Size 15 Service Rating 2 ONTT SIZE METRI TYPE WG TYPE S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

21 ontact rrangements Front View of Pin Insert Introduction 19 ONTTS rrangement ontact Size Service Rating ONTTS rrangement ontact Size 18/15, 4/25 Service Rating 2 23 ONTTS rrangement 32-6 ontact Size 16/15, 2/25, 3/60, 2/160, 16/16, 2/12, 3/8, 2/4 Service Rating 2 24 ONTTS rrangement ontact Size 24/15 Service Rating 1 ONTT SIZE METRI TYPE WG TYPE S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

22 Introduction ontact rrangements Front View of Pin Insert 26 ONTTS rrangement ontact Size 15 Service Rating 2 28 ONTTS H G J T K U S d V L b e W R M a X Z Y D Q N P F E rrangement ontact Size 19/15, 9/25 Service Rating E=2; alance=1 35 ONTTS rrangement 32-7 ontact Size 28/15, 7/25 Service Rating,,H, J=1; alance=2 37 ONTTS 42 ONTTS rrangement ontact Size 15 2/100, 40/15 Service Rating 2 2 ONTT SIZE METRI TYPE WG TYPE S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

23 ontact rrangements Front View of Pin Insert Introduction D E 43 ONTTS F G H J K L M N P R S T U V W Y Z a b c d e f g h j k l m n p r s 48ONTTS t u v w y rrangement ontact Size Service Rating ONTTS rrangement ontact Size 15 Service Rating 2 D E F G H J K L M N P Q R S T U V W X Y Z a b d e 61 ONTTS f g h j k m n p r t u v D E F G H J K L M N P Q R S T U V W rrangement 32-69* ontact Size 41/10, 20/15 Service Rating 1 *Not for connectors style 1 and 2 ONTT SIZE METRI TYPE WG TYPE S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

24 Introduction Pin ontacts PIN ONTT D1 D2 L2 D3 L3 D4 D5 D6 L4 PIN ONTTS VG Part Number Part Number olor ode ontact Size Metric WG D D D D D D ±0.2 L2 ±0.15 L3 ±0.1 L4 Min. P PG P P-001G10 lue P15S SPG P15S SP-001G10 lue 15S 16S P15S SP-002G10 Red 1.20 P PG P P-001G10 lue P P-002G10 Red 1.20 P PG P P-001G10 lack P PG P PG10 Yellow P P-001G10 Green 2.50 P PG P PG P PG P P-001G10 rown P PG P PG P P-001G10 White P P-002G10 Grey 9.10 P PG Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

25 Socket ontacts Introduction SOKET ONTT D1 L2 L3 D2 D3 D4 D5 D6 L4 SOKET ONTTS VG Part Number Part Number olor ode ontact Size Metric WG D D D D D D ±0.2 L2 ±0.15 L3 ±0.1 L4 Min. S SG S S-001G10 lue S15S SSG S15S SS-001G10 lue 15S 16S S15S SS-002G10 Red 1.20 S SG S S-001G10 lue S S-002G10 Red 1.20 S SG S S-001G10 lack S SG10 Yellow S S-001G10 Green 2.50 S SG S SG S SG S S-001G10 rown S SG S SG S S-001G10 White S S-002G10 Grey 9.10 S SG Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

26 Introduction Sealing Plugs and lternate Key Position SELING PLUGS D2 D1 L2 Part Number SELING PLUG DIMENSIONS ontact Size D1 D2 Metric WG ±0.1 ±0.2 ±0.1 L2 ±0.3 olor Red 16 15S lue Yellow White Green lack LTERNTE KEY POSITION Normal Position lternate Position with Socket ontacts lternate Position with Pin ontacts 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

27 ayonet Lock ssemblies imum Panel Thickness and Panel ut-out Mounting Data Introduction MXIMUM PNEL THIKNESS max PNEL THIKNESS FOR TYPE, J1, J2, N1 ND N2 ONNETORS (Used for Rear Mounting) Shell Size 10SL 14S 16S ,70 3,70 3,70 3,70 3,70 3,70 5,25 5,25 6,10 6,10 PNEL THIKNESS FOR TYPE, 2, 1, 2, S1, S2, U1 ND N2 ONNETORS (Used for Rear Mounting) Shell Size 10SL 14S 16S ,20 7,20 7,20 7,50 7,50 7,50 7,50 7,50 7,50 7,50 R II Ø II Ø T PNEL UT-OUT FOR TYPE, J1, J2, N1 ND N2 ONNETORS (Front Panel Mounting) Shell Size 10SL 14S 16S Ø 17,0 20,0 23,0 26,5 30,0 33,0 36,0 42,0 48,5 55,0 R ±0.1 18,2 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 ØT 3,4 3,4 3,4 3,4 3,4 3,4 3,9 3,9 4,5 4,5 PNEL UT-OUT FOR TYPE, 2, 1, 2, S1, S2, U1 ONNETORS (Rear Panel Mounting) Shell Size 10SL 14S 16S Ø 19,1 25,5 28,3 31,7 35,0 38,3 41,8 47,6 54,3 60,5 R ±0.1 18,2 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 ØT 4,5 4,5 4,5 4,5 4,5 4,5 4,5 5,5 5,5 5, Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

28 Front Panel Wall Mount Receptacle Modification odes asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Omitted - for Standard Version 1 - onnector Less ontacts 32-6 S 1 N 1 - Front Panel Mount Receptacle P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Front panel mount square flange receptacle no accessory threads. Through mounting holes. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

29 Front Panel Wall Mount Receptacle L2 L3 D2 E Ø D1 L4 Shell Size Ø D1 D2 H13 TLE I: DIMENSIONS E ± SL S S ±0.3 L L3 ±0.2 L4 ±0.3 Weight gr Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

30 1 and 2 Rear Panel Wall Mount Receptacle with Threaded (1) and Thru-Holes (2) Modification odes asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Omitted - for Standard Version 1 - onnector Less ontacts S 1 N 1 Rear Panel Mount Receptacle with Threaded Holes 2 - Thru Holes P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Rear panel mount square flange receptacle no accessory threads. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

31 1 and 2 Rear Panel Wall Mount Receptacle with Threaded (1) and Thru-Holes (2) L2 L3 D2 E Ø D1 L4 2 D2 Shell Size Ø D1 1 TLE I: DIMENSIONS D2 E 2 ±0.1 ±0.3 H13 10 SL M S M S M M M M M M M M M L L3 ±0.2 L4 ±0.3 Weight gr Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

32 1 and 2 ulkhead Feed-Thru Receptacle with Threaded (1) and Thru-Holes (2) asic Part Number ontact rrangement lternate Insert Positions N - X - Y- Z P/S N ulkhead Feed-Thru with: 1 - Threaded Holes 2 - Thru Holes P/S - Pin/Socket Solid ontacts Male ontacts Female ontacts pplication Notes 1. ulkhead feed-thru receptacle with threaded or through mounting holes. 2. Solid contact material consists of copper alloy with silver plating. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted. 7. Male contacts: Front mount (02) Female contacts: Rear mount (03) 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

33 1 and 2 ulkhead Feed-Thru Receptacle with Threaded (1) and Thru-Holes (2) 02 Male ontacts 03 Female ontacts L2 L3 D2 E O-ring Ø L4 D2 2 Shell Size Ø D2 2 H13 TLE I: DIMENSIONS E ±0.1 ±0.3 L L3 ±0.2 L4 ±0.3 Weight gr. 10 SL 18.2 M S 24.6 M S 27.4 M M M M M M M M M Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

34 D Straight Plug with able lamp, ushing and Wire Sealing Grommet asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts D 32-6 P 1 N 1 D - Straight Plug with able lamp and ushing P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Straight plug connector complete with wire sealing grommet, cable clamp and bushing. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

35 D Straight Plug with able lamp, ushing and Wire Sealing Grommet D2 L3 L2 ØD1 TLE I: DIMENSIONS Shell Size ØD1 D2 L2 L3 Weight gr. 10 SL S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

36 E 90 Plug with able lamp, ushing and Wire Sealing Grommet asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts E 32-6 P 1 N 1 E - 90 Plug with able lamp and ushing P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes Plug connector with wire sealing grommet, cable clamp and bushing. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

37 E 90 Plug with able lamp, ushing and Wire Sealing Grommet ØD1 L2 L3 D2 L4 TLE I: DIMENSIONS Shell Size ØD1 D2 L2 L3 L4 Weight gr. 10 SL S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

38 E1 and K 90 Plug with onduit dapter (E1) and Grounding Fingers (K) asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts E P 1 N 1 E1-90 Plug without Grounding Fingers, able lamp and ushing. K - 90 Plug with Grounding Fingers without able lamp and ushing. P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes Plug connector with conduit adapter and grounding fingers. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

39 E1 and K 90 Plug with onduit dapter (E1) and Grounding Fingers (K) ØD1 L2 L5 D3 Shell Size ØD1 D3 TLE I: DIMENSIONS L2 L5 Min Weight gr. 10 SL UNEF S UNEF S UNEF UNEF UNEF NEF NEF NEF NEF NS NS Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

40 F In Line Receptacle with able lamp, ushing and Wire Sealing Grommet asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts F 32-6 S 1 N 1 F - In-Line Receptacle with able lamp and ushing P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. In-Line connector with: cable clamp and bushing. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

41 F In Line Receptacle with able lamp, ushing and Wire Sealing Grommet L2 L3 D1 Ø D2 L7 L5 L4 Shell Size Ø D1 D2 TLE I: DIMENSIONS L2 ±0.4-0 L3 ±0.2 L4 L5 ±0.2 L7 Weight gr. 10 SL S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

42 G and T Straight Plug with Heat Shrink oot dapter (G), Grounding Fingers (T), and Wire Sealing Grommet asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts G 32-6 P 1 N 1 G - Straight Plug with Heat Shrink oot dapter T - dd Grounding Fingers P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Straight plug connector with wire sealing grommet and shrink boot adapter. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

43 G and T Straight Plug with Heat Shrink oot dapter (G), Grounding Fingers (T), and Wire Sealing Grommet L5 D6 D5 D4 D3 3.5 ±0.2 style G ØD1 TLE I: DIMENSIONS Shell Size ØD1 D3 ±0.2 D4 ±0.2 D5 D6 Min L5 ±0.5 Weight gr. 10 SL S S , Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

44 H and L Straight Plug with onduit dapter (H) and Grounding Fingers (L) asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts H 32-6 P 1 N 1 H - Includes Wire Sealing Grommet; without Grounding Fingers L - With Grounding Fingers and Wire Sealing Grommet P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Straight Plug connector. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

45 H and L Straight Plug with onduit dapter (H) and Grounding Fingers (L) L2 D2 D3 ØD1 Shell Size ØD1 D2 Min TLE I: DIMENSIONS D3 L2 Min Weight gr. 10 SL UNEF S UNEF S UNEF UNEF UNEF NEF NEF NEF NEF NS NS Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

46 J1 and J2 Wall Mount Receptacle with able lamp, ushing and Wire Sealing Grommet With Threaded (J1) and Thru-Holes (J2) asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts J S 1 N 1 Wall Mount Receptacle with able lamp and ushing and... J1 - Threaded Holes J2 - Thru-Holes P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Wall mount receptacle with wire sealing grommet, cable clamp and bushing. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

47 J1 and J2 Wall Mount Receptacle with able lamp, ushing and Wire Sealing Grommet With Threaded (J1) and Thru-Holes (J2) L2 L3 D2 E Ø D3 L6 L4 L5 D2 J2 Shell Size Ø J1 D2 J2 H13 D3 TLE I: DIMENSIONS E ±0.1 L L3 ±0.2 L4 ±0.3 L5 L6 Weight gr. 10 SL 18.2 M S 24.6 M S 27.4 M M M M M M M M M Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

48 M Straight Plug with EMI/RFI ackshell, Grounding Fingers, Wire Sealing Grommet and Heat Shrink oot Lip asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts M 32-6 P 1 N 1 M - Straight Plug with EMI ackshell/shrink oot dapter and Grounding Fingers P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Straight plug connector with EMI backshell and boot adapter. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

49 M Straight Plug with Grounding Fingers, EMI/RFI ackshell, Wire Sealing Grommet and Heat Shrink oot Lip L5 1 L6 D4 D6 D5 D7 D3 3.5 ± ±0.2 ±0.2 L7 ØD1 Shell Size ØD1 D3 D4 Min D5 TLE I: DIMENSIONS D6 D7 ±0.5 L5 Min L L Weight gr. 10 SL M16x S M20x S M23x M23x M26x M30x M32x M36x , M39x M45x M52x Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

50 N1 and N2 Wall Mount Receptacle with EMI/RFI ackshell, Heat Shrink oot Lip and Sealing Grommet asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts N S 1 N 1 Wall Mount Receptacle with EMI ackshell/shrink oot dapter and... N1 - Threaded Holes N2 - Thru-Holes P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Wall mount receptacle with EMI backshell and shrink boot adapter. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

51 N1 and N2 Wall Mount Receptacle with EMI/RFI ackshell, Heat Shrink oot Lip and Sealing Grommet L2 L3 1 L6 L5 D2 E Ø D4 D6 D5 D7 D3 3.5 ±0.2 L7 3.5 ±0.2 style N1 style U1 L4 style N2 D2 N2 style U2 Shell Size Ø D2 N1 N2 H13 D3 D4 Min D5 TLE I: DIMENSIONS D6 D7 ±0.5 E ±0.1 L L3 ±0.2 L4 ±0.3 L5 Min L L Weight gr. 10 SL 18.2 M M16x S 24.6 M M20x S 27.4 M M23x M M23x M M26x M M30x M M32x M M36x M M39x M M45x M M52x Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

52 R1 Straight Plug with Grounding Fingers, EMI / RFI ackshell and Shrink oot dapter asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts R P 1 N 1 R1 - Straight Plug with EMI ackshell/shrink oot dapter and Grounding Fingers P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Straight Plug with Grounding Fingers, EMI / RFI ackshell and Shrink oot dapter. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

53 R1 Straight Plug with Grounding Fingers, EMI / RFI ackshell and Shrink oot dapter L6 3.5 ±0.2 1 ±0.2 L5 D3 D4 D6 D5 D ØD1 Shell Size Useable Inserts ØD1 D TLE I: DIMENSIONS D D5 D6 ±0.3 D7 ±0.3 L5 L Weight gr. 14 S 14S M20x S 16S M20x M22x M27x M35x M35x Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

54 S1 and S2 Rear Wall Mount Receptacle with EMI / RFI ackshell, Dual-Lip Heat Shrink oot dapter asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts S S 1 N 1 Rear Wall Mount Receptacle with EMI ackshell/shrink oot dapter S1 - Threaded Holes S2 - Thru-Holes P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Rear wall mount receptacle with EMI backshell. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

55 S1 and S2 Rear Wall Mount Receptacle with EMI / RFI ackshell, S1 Dual-Lip Heat Shrink oot dapter S2 onnettore da paratia Wall mounting receptacle L6 L2 L2 L3 L3 L5 L5 3.5 ±0.2 1 ± ± ±0.2 1 ±0.2 1 ±0.2 D2 D2 E E Ø Ø D5 D3 D3 D4 D4 D6 D6 D5 D7 D7 K 18 max ±0.2 style style S1 S1 style U1 Es. / Ex. : S120-27PN D2 D2 L4 L4 S2 style style S2 S2 S2 style U2 Shell Size Dime nsione Inse rti Ø D2 E L2 L3 L4 Peso / Guscio Utilizzabili +0 S1 S Mass ±0.1 Ma x. ±0.2 ±0.3 Shell Size Usable inserts H13-0 g. 14 S 14S M S 16S M M TLE M4 I: 3.2DIMENSIONS M Ø D2 D3 D4 L2 L6 Useable M5 4.3 D D7 81 E L357.0 L4 195 L5 +0 S1 S D Inserts ±0.3 ±0.3 ±0.1 ±0.2 ± H Weight gr. 14 S 14S M M20x S 16S-1 onnettore 27.4 fisso M4 a flangia quadra 14.0 dotato M20x1 di Fixed 24.6 connector 58.5 with 18.2 mounting flange 21 and pettine 18-1di massa 30.8 M4 e custodia atta 16.0 al riporto M22x1di adapter 27.0for mounting of 4.0 shielding 35.0 braids by calza schermo 34.2 ed M4all utilizzo di guaina 18.0 M27x pressing 29.4with 69.5 a nut 23.05, as well 4.0 as 38.0 for using heat termorestringente M5conforme a VG M35x shrinkable 39.7 connector endshells 50.8according to Da utilizzare 53.4 con M5 cavi 4.3 conformi a VG95218 M35x VG Fornito completo di zoccolo isolante. To use with wires according to VG Includes wire sealing grommet. Tipo S1 dotato di 4 fori filettati Dimensions. in millimeters are subject to change without notice Tipo Glenair, S2 Inc. dotato di 4 fori passanti. U.S. GE ode Style S1 with 4 threaded holes. Printed in Italy Style S2 with 4 entry holes. GLENIR, IN IR WY GLENDLE, FX

56 U1 and U2 Rear Wall Mount Receptacle with Heat Shrink oot dapter and Sealing Grommet asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts U S 1 N 1 Rear Wall Mount Receptacle with Heat Shrink oot dapter U1 - Threaded Holes U2 - Thru-Holes P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. Rear wall mount receptacle with heat shrink boot adapter. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

57 U1 and U2 Rear Wall Mount Receptacle with Heat Shrink oot dapter and Sealing Grommet L2 L3 L5 D2 E Ø D6 D5 D4 D ±0.2 ± ±0.2 style U1 style U1 D2 L4 style U2 U2 style U2 Shell Size Ø D2 1 2 H13 D3 ±0.2 D4 ±0.2 TLE I: DIMENSIONS D5 D6 Min E ±0.1 L L3 ±0.2 L4 ±0.3 L5 ±0.5 Weight gr. 10 SL 18.2 M S 24.6 M S 27.4 M M M M M M M M M Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

58 V In-Line Receptacle with Heat Shrink oot dapter asic Part Number ontact rrangement 1 - Standard WG ontacts (Omit for Metric) Modification odes Omitted - for Standard Version 1 - onnector Less ontacts V 32-6 P 1 N 1 V - In-Line Receptacle with Heat Shrink oot dapter P - Pin contacts S - Socket contacts lternate Insert Positions N - X - Y- Z pplication Notes 1. In-Line Receptacle with heat shrink boot adapter. 2. Standard crimp contact material consists of copper alloy with silver plating. Please see pages for additional contact information. 3. Insert arrangements IW. Please see pages Standard insert is synthetic rubber, oil and low temperature resistant (-55 to +125 ) IW MIL-R Stainless steel and marine bronze shells are available in Series ITS products. Please consult factory. 6. ll dimensions are metric unless otherwise noted Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

59 V In-Line Receptacle with Heat Shrink oot dapter L2 L3 D1 Ø D6 D5 D4 D3 L5 3.5 ±0.2 L4 Shell Size Ø D1 D3 D4 Min TLE I: DIMENSIONS D5 D6 10 SL M16x S M20x S M23x M23x M26x M30x M32x M36x M39x M45x L L3 ±0.2 L L5 ±0.3 Weight gr M52x Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

60 ccessories K Plug Protective over With Stainless Steel hain Shell size K - 14 S asic Part Number ayonet ompatible Plug over with Stainless Steel hain pplication Notes 1. Metal protective cover for bayonet plug connectors with stainless steel chain. 2. Standard materials configuration consists of aluminum alloy with cadmium olive drab passivation IW QQ-P Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

61 K Plug Protective over With Stainless Steel hain ccessories L4 L3 L2 D1 ØD2 onnector Size D1 ØD TLE I: DIMENSIONS Min L2 L3 L4 Weight gr. 10 SL S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

62 ccessories K Plug Protective over With Polyamide lack Rope Shell size K - 14 S asic Part Number Rope Lanyard End Termination for Plug over pplication Notes 1. Metal protective cover for bayonet plug connectors with polyamide black rope. 2. Standard materials configuration consists of aluminum alloy with cadmium olive drab passivation IW QQ-P Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

63 K Plug Protective over With Polyamide lack Rope* ccessories L2 1.5 max Ø Ø Ø Ø 4.3 TLE I: DIMENSIONS RIMPING TOOL (for End Rope Termination) onnector Size Ø. Ø ±0.1. L2. Weight gr. 10 SL S S od.: EMRE HN Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

64 ccessories KR Receptacle Protective over With Stainless Steel hain Shell size KR - 14 S asic Part Number ayonet ompatible Receptacle over with Stainless Steel hain pplication Notes 1. Metal protective cover for bayonet receptacle connectors with stainless steel chain. 2. Standard materials configuration consists of aluminum alloy with cadmium olive drab passivation IW QQ-P Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

65 KR Receptacle Protective over With Stainless Steel hain ccessories L2 L4 L3 D1 ØD2 onnector Size D1 ØD TLE I: DIMENSIONS Min L2 L3 L4 Weight gr. 10 SL S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

66 ccessories K Receptacle Protective over With Polyamide lack Rope Shell size K - 14 S asic Part Number Rope Lanyard End Termination for Receptacle over pplication Notes 1. Metal protective cover for bayonet receptacle connectors with polyamide black rope. 2. Standard materials configuration consists of aluminum alloy with cadmium olive drab passivation IW QQ-P Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

67 K Receptacle Protective over With Polyamide lack Rope* ccessories L2 1.5 max Ø Ø Ø 4.3 onnector Size TLE I: DIMENSIONS Ø ±0.5. L2. Weight gr. 10 SL S S RIMPING TOOL (for End Rope Termination) od.: EMRE HN Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

68 ccessories 0D Dummy Plug Stowage Receptacle with Open ack for Front Panel Mount Shell size 0D - 14 S asic Part Number Dummy Plug Stowage Receptacle with Open back for Front Panel Mount DUMMY STOWGE REEPTLE pplication Notes 1. Dummy receptacle stowage fitting protects the plug connector when not in use. 2. Standard materials configuration consists of aluminum alloy with cadmium olive drab passivation IW QQ-P Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

69 0D Dummy Plug Stowage Receptacle with Open ack for Front Panel Mount ccessories DUMMY STOWGE REEPTLE L3 D2 L2 D1 Shell Size D ØD2 ±0.2 TLE I: DIMENSIONS ±0.3 L2 ±0.1 L3 Weight gr. 10 SL S S Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

70 ccessories KK General Duty lass able lamp Shell size KK - 6 asic Part Number MIL-DTL-5015 ompatible General Duty able lamp GENERL DUTY LSS LE LMP pplication Notes 1. General duty lass cable clamp suitable for jacketed or multipolar cable or wires protected by tubing. 2. Standard materials configuration consists of aluminum alloy with cadmium olive drab passivation IW QQ-P Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

71 KK General Duty lass able lamp ccessories GENERL DUTY LSS LE LMP L3 D3 D2 D1 L2 Part Number onnector Size Related Sleeve (Not Supplied) TLE I: DIMENSIONS D1 ±0.79 D2 D3 ±0.79 L2 ±0.78 KK4 10SL KT10SL UNEF KK6 14S KT14S UNEF KK S KT UNEF KK10 18 KT UNEF KK KT NEF KK KT NEF KK20 32 KT UNS KK24 36 KT UNS L3 Weight gr Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

72 ccessories KT Neoprene ushing for able Used with General Duty lass able lamps Shell size KT - 6 asic Part Number MIL-DTL-5015 ompatible General Duty able lamp NEOPRENE USHING pplication Notes 1. Neoprene bushing for protection and reduction, used with lass cable clamps Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

73 KT Neoprene ushing for able Used with General Duty lass able lamps ccessories NEOPRENE USHING D2 D1 L ØD3 onnector Size Part Number TLE I: DIMENSIONS D1 ±0.2 D2 ±0.2 ØD3 ±0.4 L ±0.6 Weight gr. 10SL KT10SL S KT14S S KT KT KT KT KT KT Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

74 ccessories D1 Front Panel Mount Receptacle Gasket Shell size D 18-1 asic Part Number FRONT PNEL MOUNT REEPTLE GSKET Non-onductive pplication Notes 1. Non-conductive gaskets for front-mount square flange receptacles Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

75 D1 Front Panel Mount Receptacle Gasket ccessories FRONT PNEL MOUNT REEPTLE GSKET D1 Non-onductive S E D1 D2 L Part Number Shell Size TLE I: DIMENSIONS D D E L ±0.5 S ±0.4 D 10SL-1 10SL D 14S-1 14S D S D D ,0 2 D D D D D Weight gr Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

76 ccessories DH1 Rear Panel Mount Receptacle Gasket Shell size DH 18-1 asic Part Number RER PNEL MOUNT REEPTLE GSKET Non-onductive pplication Notes 1. Non-conductive gaskets for rear panel-mount square flange receptacles Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

77 DH1 Rear Panel Mount Receptacle Gasket ccessories RER PNEL MOUNT REEPTLE GSKET DH1 Non-onductive S E D1 D2 L Part Number Shell Size TLE I: DIMENSIONS D D E L ±0.5 S ±0.4 DH 10SL-1 10SL DH 14S-1 14S DH S DH DH ,0 2 DH DH DH DH DH Weight gr Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

78 ccessories ayonet-lock rimping Table and Tools Pin ontacts ontact P/N GLENIR Pin ontact P/N Size Wire ross Section mm 2 WG P/N Manual rimp Tool Order References Turret P/N Pneumatic rimping Tool P/N Order References P P-001G ,2 0, M22520/1-01 M W27F M P PG , M22520/1-01 M W27F M P15S SP-001G10 16S 0,13 0, M22520/1-01 M W27F M P15S SP-002G10 16S 0,33 0, M22520/1-01 M W27F M P15S SPG10 16S 1 1,5 16 M22520/1-01 M W27F M P P-001G ,13 0, M22520/1-01 M W27F M P P-002G ,33 0, M22520/1-01 M W27F M P PG ,5 16 M22520/1-01 M W27F M P P-001G ,75 1, M22520/1-01 M W27F M P PG ,3 2, M22520/1-01 M W27F M P PG ,3 2, M22520/1-01 M W27F M P P-001G10 8 2,5 P PG P PG P PG P P-001G P PG P PG P P-001G P P-002G P PG P PG For further rimping Steps details, please contact the factory. Please refer to VG for standard VG crimp tools setting Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

79 ayonet-lock rimping Table and Tools Pin ontacts ccessories ontact P/N GLENIR Pin ontact P/N Oleodinamic rimp Tool rimping Die Insertion Tool Removal Tool P/N Order References P/N Order References P/N Order References P/N Order References P P-001G10 DK M DRK81-20 M P PG10 DK M DRK81-20 M P15S SP-001G10 DK M DRK96 M P15S SP-002G10 DK M DRK96 M P15S SPG10 DK M DRK96 M P P-001G10 DK M DRK96 M P P-002G10 DK M DRK96 M P PG10 DK M DRK96 M P P-001G10 DK M DRK96 M P PG10 DK M DRK96 M P PG10 DK M DRK96 M P P-001G10 HT45 M ME2 M M M P PG10 HT45 M ME2 M M M P PG10 HT45 M ME2 M M M P PG10 HT45 M ME2 M M M P P-001G10 HT45 M ME5 M M M P PG10 HT45 M ME5 M M M P PG10 HT45 M ME5 M M M P P-001G10 HT45 M ME10 M M M P P-002G10 HT45 M ME10 M M M P PG10 HT45 M ME10 M M M P PG10 HT45 M ME10 M M M For further rimping Steps details, please contact the factory. Please refer to VG for standard VG crimp tools setting Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

80 ccessories ayonet-lock rimping Table and Tools Sockets ontacts ontact P/N GLENIR Pin ontact P/N Size Wire ross Section mm 2 WG P/N Manual rimp Tool Order References Turret P/N Pneumatic rimping Tool P/N Order References S S-001G ,2 0, M22520/1-01 M W27F M S SG , M22520/1-01 M W27F M S15S SS-001G10 16S 0,13 0, M22520/1-01 M W27F M S15S SS-002G10 16S 0,33 0, M22520/1-01 M W27F M S15S SSG10 16S 1 1,5 16 M22520/1-01 M W27F M S S-001G ,13 0, M22520/1-01 M W27F M S S-002G ,33 0, M22520/1-01 M W27F M S SG ,5 16 M22520/1-01 M W27F M S S-001G ,75 1, M22520/1-01 M W27F M S SG ,3 2, M22520/1-01 M W27F M S S-001G10 8 2,5 S SG S SG S SG S S-001G S SG S SG S S-001G S S-002G S SG S SG For further rimping Steps details, please contact the factory. Please refer to VG for standard VG crimp tools setting Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

81 ayonet-lock rimping Table and Tools Socket ontacts ccessories ontact P/N GLENIR Pin ontact P/N Oleodinamic rimp Tool rimping Die Insertion Tool Removal Tool Guide Pin P/N Order References P/N Order References P/N Order References P/N Order Order References References S S-001G10 DK M DRK81-20 M M S SG10 DK M DRK81-20 M M S15S SS-001G10 DK M DRK96 M M S15S SS-002G10 DK M DRK96 M M S15S SSG10 DK M DRK96 M M S S-001G10 DK M DRK96 M M S S-002G10 DK M DRK96 M M S SG10 DK M DRK96 M M S S-001G10 DK M DRK96 M M S SG10 DK M DRK96 M M S S-001G10 HT45 M ME2 M M M M S SG10 HT45 M ME2 M M M M S SG10 HT45 M ME2 M M M M S SG10 HT45 M ME2 M M M M S S-001G10 HT45 M ME5 M M M S SG10 HT45 M ME5 M M M S SG10 HT45 M ME5 M M M S S-001G10 HT45 M ME10 M M M S S-002G10 HT45 M ME10 M M M S SG10 HT45 M ME10 M M M S SG10 HT45 M ME10 M M M For further rimping Steps details, please contact the factory. Please refer to VG for standard VG crimp tools setting Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX

82 Index ayonet-lock Part Number Index D Product Description ayonet-lock ssemblies Product Line Overview -1 ayonet-lock ssemblies pplications -2 ayonet-lock ssemblies vailable omponents -3 ayonet-lock General Duty rimp ontact onnector ross Reference -4 ayonet-lock rimp ontact onnector Technical Data -5 ayonet-lock General Duty rimp ontact (MIL Type) Master How to Order -6 Glenair Series ITS ommercial Equivalent Product Line -7 ontact rrangement Tables -8 ontact rrangement Tables -9 Insert Rotations -10 Insert Rotations -11 ontact rrangements Front View of Pin Insert -12 ontact rrangements Front View of Pin Insert -13 ontact rrangements Front View of Pin Insert -14 ontact rrangements Front View of Pin Insert -15 ontact rrangements Front View of Pin Insert -16 ontact rrangements Front View of Pin Insert -17 Pin ontacts -20 Socket ontacts -21 Sealing Plugs and lternate Key Position -22 ayonet Lock ssemblies imum Panel Thickness and Panel ut-out Mounting Data -23 Front Panel Wall Mount Receptacle -1 Front Panel Wall Mount Receptacle -2 1 and 2 Rear Panel Wall Mount Receptacle with Threaded (1) and Thru-Holes (2) -3 1 and 2 Rear Panel Wall Mount Receptacle with Threaded (1) and Thru-Holes (2) -4 1 and 2 ulkhead Feed-Thru Receptacle with Threaded (1) and Thru-Holes (2) -5 1 and 2 ulkhead Feed-Thru Receptacle with Threaded (1) and Thru-Holes (2) -6 D Straight Plug with able lamp, ushing and Wire Sealing Grommet -7 D Straight Plug with able lamp, ushing and Wire Sealing Grommet -8 E 90 Plug with able lamp, ushing and Wire Sealing Grommet -9 E 90 Plug with able lamp, ushing and Wire Sealing Grommet -10 E1 and K 90 Plug with onduit dapter (E1) and Grounding Fingers (K) -11 E1 and K 90 Plug with onduit dapter (E1) and Grounding Fingers (K) -12 F In Line Receptacle with able lamp, ushing and Wire Sealing Grommet -13 F In Line Receptacle with able lamp, ushing and Wire Sealing Grommet -14 G and T Straight Plug with Heat Shrink oot dapter (G), Grounding Fingers (T) & Wire S.Grommet -15 G and T Straight Plug with Heat Shrink oot dapter (G), Grounding Fingers (T) & Wire S. Grommet -16 H and L Straight Plug with onduit dapter (H) and Grounding Fingers (L) -17 H and L Straight Plug with onduit dapter (H) and Grounding Fingers (L) -18 J1 and J2 Wall Mount Receptacle with able lamp, ushing & Wire S.Grommet With Thru-Holes -19 J1 and J2 Wall Mount Receptacle with able lamp, ushing & Wire S.Grommet With Thru-Holes -20 M Straight Plug with EMI/RFI ackshell, Grounding Fingers, Wire Sealing Grommet and Heat Shrink oot Lip -21 M Straight Plug with Grounding Fingers, EMI/RFI ackshell, Wire Sealing Grommet and Heat Shrink oot Lip -22 Page 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX D-1

83 ayonet-lock Part Number Index Index Product Description N1 and N2 Wall Mount Receptacle with EMI/RFI ackshell, Heat Shrink oot Lip & Sealing Grommet -23 N1 and N2 Wall Mount Receptacle with EMI/RFI ackshell, Heat Shrink oot Lip &Sealing Grommet -24 R1 Straight Plug with Grounding Fingers, EMI / RFI ackshell and Shrink oot dapter -25 R1 Straight Plug with Grounding Fingers, EMI / RFI ackshell and Shrink oot dapter -26 S1 and S2 Rear Wall Mount Receptacle with EMI / RFI ackshell, Dual-Lip Heat Shrink oot dapter -27 S1 and S2 Rear Wall Mount Receptacle with EMI / RFI ackshell, Dual-Lip Heat Shrink oot dapter -28 U1 and U2 Rear Wall Mount Receptacle with Heat Shrink oot dapter and Sealing Grommet -29 U1 and U2 Rear Wall Mount Receptacle with Heat Shrink oot dapter and Sealing Grommet -30 V In-Line Receptacle with Heat Shrink oot dapter -31 V In-Line Receptacle with Heat Shrink oot dapter -32 K Plug Protective over With Stainless Steel hain -1 K Plug Protective over With Stainless Steel hain -2 K Plug Protective over With Polyamide lack Rope -3 K Plug Protective over With Polyamide lack Rope -4 KR Receptacle Protective over With Stainless Steel hain -5 KR Receptacle Protective over With Stainless Steel hain -6 K Receptacle Protective over With Polyamide lack Rope -7 K Receptacle Protective over With Polyamide lack Rope -8 0D Dummy Plug Stowage Receptacle with Open ack for Front Panel Mount -9 0D Dummy Plug Stowage Receptacle with Open ack for Front Panel Mount -10 KK General Duty lass able lamp -11 KK General Duty lass able lamp -12 KT Neoprene ushing for able Used with General Duty lass able lamps -13 KT Neoprene ushing for able Used with General Duty lass able lamps -14 D1 Front Panel Mount Receptacle Gasket -15 D1 Front Panel Mount Receptacle Gasket -16 DH1 Rear Panel Mount Receptacle Gasket -17 DH1 Rear Panel Mount Receptacle Gasket -18 ayonet-lock rimping Table and Tools Pin ontacts -19 ayonet-lock rimping Table and Tools Sockets ontacts -21 ayonet-lock Part Number Index D-1 Page D 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX D-2

84 Index ayonet-lock Glenair Part Product Number Warnings Index WRNING FILURE TO FOLLOW THESE INSTRUTIONS MY RESULT IN DMGE TO EQUIPMENT, SERIOUS PERSONL INJURY OR EVEN DETH. It is the user s responsibility to ensure these products are used safely. Glenair, Inc., including all Glenair, Inc. subsidiaries, is NOT responsible for damage to equipment, personal injury or death from use of Glenair, Inc. products. Only qualified electrical technicians should use interconnection products in high voltage and other electrical conditions. Interconnection products must be clean and dry when installed. Mating and de-mating should never occur under load. Damaged interconnection products must be replaced immediately by a trained electrical technician. Glenair, Inc. reserves the right to modify this Warning, any other warning, all catalogs, gleniar.com website, and any other technical information with or without notice. For further information and technical assistance, please contact your local Glenair Sales Office or see our website: D 2017 Glenair, Inc. U.S. GE ode Printed in Italy GLENIR, IN IR WY GLENDLE, FX D-3

85

86

87

88 MISSION-RITIL INTERONNET SOLUTIONS Glenair, Inc ir Way Glendale, alifornia Telephone: Fax: Glenair Power Products Group 20 Sterling Drive Wallingford, T Telephone: Facsimile: sales@glenair.com Glenair UK Ltd 40 Lower Oakham Way Oakham usiness Park Mansfield, Notts NG18 5Y England Telephone: Facsimile: sales@glenair.co.uk Glenair Microway Systems 7000 North Lawndale venue Lincolnwood, IL Telephone: Facsimile: Glenair Nordic Gustav III : S oulevard 46 SE Solna Sweden Telephone: sales@glenair.se Glenair Electric GmbH Schaberweg ad Homburg Germany Telephone: / Facsimile: / info@glenair.de Glenair Iberica / La Vega, Velada Spain Telephone: Facsimile: sales@glenair.es Glenair Italia S.p.. Via Del Lavoro, Quarto Inferiore Granarolo dell Emilia ologna, Italy Telephone: Facsimile: info@glenair.it Glenair France SRL 7, venue Parmentier Immeuble entral Parc # Toulouse France Telephone: Facsimile: sales@glenair.fr Glenair Korea Gunpo IT Valley 148 Gosan-Ro, Gunpo-Si Kyunggi-Do, Korea Telephone: Facsimile: sales@glenair.kr 2017 Glenair, Inc. Printed in Italy T-000

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

VG95234 Qualified Bayonet-Lock Connectors

VG95234 Qualified Bayonet-Lock Connectors Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical

More information

REVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS

REVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical

More information

VG95328 Qualified Bayonet-Lock Connectors

VG95328 Qualified Bayonet-Lock Connectors Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving

More information

Connectors Conforming to European Safety Standards

Connectors Conforming to European Safety Standards Series RoS ompliant onnectors onforming to European Safety Standards s of January 1995 all industrial machinery, including machine tools, which are exported to Europe must conform with European safety

More information

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors

More information

SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS

SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS SEACROW CONNECTORS MARINE BRONZE CONNECTORS FOR HARSH ENVIRONMENTAL APPLICATIONS JUNE 2014 SEACROW CONNECTORS Marine Bronze Connectors for Harsh Environmental Applications Shipboard Application Glenair

More information

NFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013

NFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013 NF F 61030 Qualified C onn ec to r s ith series Easy-to-AssemblY, Power and Signal Reliable Reverse Bayonet Coupling June 2013 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High

More information

IPT SE and IPT Series

IPT SE and IPT Series IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs

More information

A Complete Miniature Range Threaded, Break Away, Bayonet

A Complete Miniature Range Threaded, Break Away, Bayonet omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical

More information

Amphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.

Amphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors. mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,

More information

Now Available in Black Zinc Nickel

Now Available in Black Zinc Nickel 847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances

More information

8D Series D38999 Aluminum Series

8D Series D38999 Aluminum Series onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle

More information

Miniature Break Away Release Connector

Miniature Break Away Release Connector 8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:

More information

Mil-Spec Backshells and Connector Accessories

Mil-Spec Backshells and Connector Accessories Mil-Spec ackshells and onnector ccessories U n i t e d S t a t e s U n i t e d K i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n n Important Notice for ll uyers of Military Standard ylindrical

More information

MS/Standard DL-Class Pre-Earth type

MS/Standard DL-Class Pre-Earth type MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety

More information

PART NUMBER BREAKDOWN

PART NUMBER BREAKDOWN SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options

More information

KDB / VG Series

KDB / VG Series / V 9523 Series ontents Introduction........................... 2 onnector design...................... 2 Technical data......................... 3 ounting dimensions.................. 5 ow to order..........................

More information

BRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2

BRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2 RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14

More information

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20

More information

micro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999

micro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999 micro38999 SERIES High Vibration Miniature onnectors Qualified ccording MIL-TL-38999 8, 8 & 8LT Series Presentation The micro38999 Series (8, 8 and 8LT ranges) is made to meet a new generation of applications

More information

Electrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II

Electrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002

More information

MIL-DTL-83723, Series III, Matrix

MIL-DTL-83723, Series III, Matrix MIL-DTL-, Series III, TBLE OF CONTENTS FOR SECTION MIL-DTL-, SERIES III, MTRIX Wide Variety of Coupling Styles & Options... Class Descriptions, Performance Specifications, Quick Reference Chart.... Insert

More information

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive

More information

Micro-D Printed Circuit Board Connectors

Micro-D Printed Circuit Board Connectors PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the

More information

Reverse Bayonet Coupling Connectors

Reverse Bayonet Coupling Connectors Reverse ayonet oupling onnectors Series RoS ompliant onforming Standard -T-5015 Wa t e r p r o o f P67 P55 ock Type ayonet OUT series is a bayonet coupling connector which utilizes -T-5015 insert arrangements

More information

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated

More information

MIL-C-5015 Bulkhead Receptacles

MIL-C-5015 Bulkhead Receptacles I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient

More information

DEUTSCH DBAS Series Connectors

DEUTSCH DBAS Series Connectors DEUTSH DS Series onnectors Standards SE/S81703 Series III, UTE 93422 Model HE 311 Extreme Reliability in Harsh erospace and Military pplications EROSPE, DEENSE & MRINE /// DEUTSH DS SERIES ONNETORS DEUTSH

More information

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments

Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors

More information

Amphenol Heavy Duty Cylindrical Connectors

Amphenol Heavy Duty Cylindrical Connectors mphenol Heavy Duty ylindrical onnectors 12-052-9 mphenol mphenol Heavy Duty ylindrical onnectors MIL--22992/Proprietary High urrent apacity Rugged onstruction Safety Serviceability mphenol meets the demands

More information

DT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30

DT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30 ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories

More information

Topside / Shipboard Environmental Connectors

Topside / Shipboard Environmental Connectors eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its-mb reverse-bayonet mil-c-5015 type / VG95234 EQUIVAEN arine Bronze eries I-B connectors are compliant with VG95234, using

More information

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.

More information

SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION

SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL

More information

Circular. Cannon VG/CA-Bayonet

Circular. Cannon VG/CA-Bayonet Cannon VG/C-Bayonet Introduction Cannon C-Bayonet series was designed in accordance with the VG95234 specification. This versatile and highly reliable connector series is an improvement on the well established

More information

Amphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors

Amphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors mphenol - everse ayonet oupling onnectors 12-027-1 he Industrial onnector for actory utomation, obotics, rocess ontrol and est & easurement quipment. mphenol able of ontents age o. mphenol - everse ayonet

More information

VG95351E7. O-Ring for use with Style B flange mount connector Glenair, Inc. CAGE Code Printed in U.S.A.

VG95351E7. O-Ring for use with Style B flange mount connector Glenair, Inc. CAGE Code Printed in U.S.A. Series onnectors V95351 and V96934 Qualified onnectors V95351 and V96934 Qualified Products bout The V Specifications The erman ederal Office of efense Technology and Procurement (W) establishes procurement

More information

CA-COM Industrial Connectors

CA-COM Industrial Connectors CA-COM Industrial Connectors ITT Corporation ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial

More information

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied

More information

EN3716 SAE AS81659 ARINC

EN3716 SAE AS81659 ARINC 6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical

More information

Amphenol Industrial Threaded AIT

Amphenol Industrial Threaded AIT mphenol Industrial Threaded IT IT Series is a low cost, MILDTL5015 threaded type connector for use in harsh environmental conditions. This popular, cylindrical connector is particularly well suited to

More information

Amphenol 97 Series MIL-DTL-5015

Amphenol 97 Series MIL-DTL-5015 Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.

More information

The CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com

The CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com Series t a lance Series Ruggedized High-Power Connectors The Series of heavy duty connectors is ideal for rugged industrial or military applications that demand high-power delivery. Standardized parts

More information

DMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE

DMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE MS Series ommercial ersion MI--5015 ompatible MS MS series connectors are intermateable and intermountable with MI--5015 connectors. The MS series offers: ard dielectric interial (diallyl phthalate) Zinc

More information

8D Series D38999 Composite Series

8D Series D38999 Composite Series Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC

More information

PCB Single Row Connectors

PCB Single Row Connectors SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors

More information

Features and Application

Features and Application MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact

More information

Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors

Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing

More information

Pin & Sleeve. Heavy Duty Industrial Wiring Devices for North American and European Markets

Pin & Sleeve. Heavy Duty Industrial Wiring Devices for North American and European Markets Pin & Sleeve Heavy Duty Industrial Wiring Devices for North merican and European Markets Pin & Sleeve SFETY, PERFORMNE ND DURILITY...IN SNP! Extensive Product Family: - Safe and reliable, portable electrical

More information

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL

More information

KVBS Reverse bayonet connectors for railway applications

KVBS Reverse bayonet connectors for railway applications Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and

More information

FILTER D-SUB. connectors

FILTER D-SUB. connectors FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High

More information

개요 (Overview) 절연체 (Insulator)

개요 (Overview) 절연체 (Insulator) 개요 (Overview) VG924 규격과일치하는, YH-Bayonet 시리즈커넥터입니다. 이커넥터는 MIL-TL-01의나사식결합방식을 bayonet 방식으로개량하여결합 / 분리가쉽도록제작된커넥터입니다. 진동에의한유체침투로부터보호를목적으로하는곳에사용하는데적합하도록설계된제품이며, 결합 / 분리가쉽도록설계되었습니다. 항공기및군용차량, 전차, 배등의장비및정보통신장비등에사용되고있습니다.

More information

Micro-D TwistPin Connectors and Accessories Product Selection Guide

Micro-D TwistPin Connectors and Accessories Product Selection Guide Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and

More information

MG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7

MG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7 CONTENTS General Specification........ 3 Shell Styles..... 4, 5, 6 Ordering Information Connectors... 7 Ordering Information Protective Caps... 8 Ordering Information Square Gaskets... 8 Insert Configurations.

More information

Topside / Shipboard Environmental Connectors

Topside / Shipboard Environmental Connectors Seacrow Marine Bronze IPT-MB marine bronze connectors ipt-mb mil-c-26482 bayonet type / V95328 Compliant Marine Bronze Series IPT-MB connectors are the choice for reliability when 20-16 AW signal cables

More information

38999 Series III Composite Connectors

38999 Series III Composite Connectors 8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility

More information

MIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1

MIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1 MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications

More information

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10 SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental

More information

8D Series D38999 Composite Series

8D Series D38999 Composite Series Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail

More information

8T Series. MIL-DTL Series II

8T Series. MIL-DTL Series II Contents Overview 8T Series - Presentation... 06 8T Series - Applications... 06 A universal product platform... 07 Space saving... 08 ox solutions... 08 Shell types... 08 Features by shell types... 09

More information

IPT SERIES BAYONET-LOCK CONNECTORS HIGH-DENSITY MIL-DTL SERIES I CONNECTORS VG95328 QUALIFIED FOR RUGGED MILITARY AND INDUSTRIAL APPLICATIONS

IPT SERIES BAYONET-LOCK CONNECTORS HIGH-DENSITY MIL-DTL SERIES I CONNECTORS VG95328 QUALIFIED FOR RUGGED MILITARY AND INDUSTRIAL APPLICATIONS AYONET-OK ONNETORS IPT SERIES HIGH-DENSITY MI-DT-26482 SERIES I ONNETORS VG95328 QUAIFIED FOR RUGGED MIITARY AND INDUSTRIA APPIATIONS JUNE 2015 United Kingdom Germany France Nordic Italy Spain Japan ETHERNET

More information

Table of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class

Table of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3

More information

S Rear Panel Float Mount Plugs

S Rear Panel Float Mount Plugs How To Order Series 79 HOW TO ORDR Sample Part Number H-66 M N Part Number Rear Panel Float Mount Plugs SOCKT CONTCTS WITH CRIMP TRMINTION connectors are equipped with rear-panel float mounting assemblies

More information

DT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW

DT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW T amily Overview UTSH T, TM, and TP series environmentally sealed connectors are designed for cable to cable and cable to board applications. The T connectors are used in harsh environment applications

More information

MIL-DTL-83723, Series III, Pyle

MIL-DTL-83723, Series III, Pyle ML-DTL-83723, Series, TLE OF CONTENTS ML-DTL-83723, Series, : Design Features, Customer Options, Manufacturer s Specifications.... 363, 364 Quick Reference of Choices - Threaded Styles............... 365-367

More information

MIL-DTL Series III Connectors

MIL-DTL Series III Connectors RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection

More information

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer. This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the

More information

Wall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.

Wall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31. L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting

More information

MIL-DTL Series 1 Solder Type PT

MIL-DTL Series 1 Solder Type PT MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally

More information

Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS

Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS Mighty Mouse Cobra TECHNICL SPECIICTIONS 0-0 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell ssemblies Sample Part Number 0-0-2 ZNU

More information

Proven Quality, Reliability & Expertise

Proven Quality, Reliability & Expertise CA Threaded Catalog Proven Quality, Reliability & Expertise ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy,

More information

HDE SERIES CONNECTOR TABLE OF CONTENTS

HDE SERIES CONNECTOR TABLE OF CONTENTS HDE SERIES COECTOR TLE OF COTETS Product pplications Code Logic 5 Code Logic Continued / Examples 6 HDE Features Product Options 8 Component ensions 9 Receptacle ensions 0 Grommets - Insert rrangements

More information

38999 All In One! Series III Integrated Backshell

38999 All In One! Series III Integrated Backshell 38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell

More information

Amphenol 348 Series High Density Connectors

Amphenol 348 Series High Density Connectors 348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................

More information

MCON INTERCONNECTION SYSTEM

MCON INTERCONNECTION SYSTEM MON INTERONNETION SYSTEM for the utomotive Industry TE UTOMOTIVE /// MON Interconnection System INNOVTIVE TEHNOLOGIES TE onnectivity (TE) is a leader in automotive connectivity and sensor technology. Our

More information

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev ) MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:

More information

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series

More information

WILDCAT CONNECTORS

WILDCAT CONNECTORS UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS

More information

D X X - XX - XX - X X

D X X - XX - XX - X X CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium

More information

Waterproof Series Waterproof

Waterproof Series Waterproof Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel

More information

6LGH High Voltage Connectors

6LGH High Voltage Connectors LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387

More information

97 series crimp type plugs with solid shells

97 series crimp type plugs with solid shells 97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24

More information

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order

More information

MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction

MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The

More information

MIL-C Fiber Optic Connectors

MIL-C Fiber Optic Connectors Developed and produced by Packard-Hughes Interconnect (PHI), the MIL-C-28876 Fiber Optic Connector features low optical insertion loss, repeatability, exceptional strain relief, and reliability in harsh

More information

SRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard

SRC SERIES. Signal Connectors with bayonet locking system. Derived from VG95234 & in accordance with the NF F standard SERIES Signal Connectors with bayonet locking system Derived from VG9523 & in accordance with the NF F 61-030 standard SERIES /// SIGNAL CONNECTORS Contents Main Characteristics... 2 Synoptic...3- Synoptic:

More information

Cannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation

Cannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation How to order VG Order reference Series Shell style Dash Shell size Contact arrangement Contact type Contact termination Insulator position Explanation Series Shell style VG95234 A 32 6 S 1 N VG95234 J1,

More information

VG95351 and VG96934 Qualified Connectors VG96934 TEN PIN CONNECTORS AND ACCESSORIES

VG95351 and VG96934 Qualified Connectors VG96934 TEN PIN CONNECTORS AND ACCESSORIES V95351 and V96934 Qualified onnectors Series onnectors V96934 TN PIN ONNTORS N SSORIS V96934 STYL ONIURTION SRIPTION P STYL able plug with two piece shielded backshell Page 30 STYL lange mount receptacle

More information

8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies

8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies 8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07

More information

Gecko Connectors Introduction

Gecko Connectors Introduction Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability

More information

µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors

µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the

More information

ABCIRH. Connectors. Halogen Free Bayonet Lock Connector Series

ABCIRH. Connectors. Halogen Free Bayonet Lock Connector Series Connectors Halogen Free Bayonet Lock Connector Series Company Profile TT Electronics brand AB Connectors specialises in the design, test and manufacture of high performance electronic connectors and interconnect

More information

FOR BOARD-TO-CABLE CONNECTION

FOR BOARD-TO-CABLE CONNECTION FOR OR-TO-LE ONNETION 230 SERIES (GENERL-PURPOSE TYPE) ISONTINUE FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 80 are available for

More information

17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA

17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA 17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors

More information

AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications.

AMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications. AMPHENOL PCD SHENZHEN ASGTC Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications 1 www.amphenolpcd.com.cn CONTENT CONTENT ASGTC Series Connector structure.........

More information

Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003

Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003 Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature

More information

INTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors

INTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors OUO etronics ndia, established as manufacturers of connectors in, has grown into a leading producer and exporter of grade electrical connectors and related accessories. etronics ndia's continuing mission

More information

Series 80 Mighty Mouse Technical Reference Complete Product Specification

Series 80 Mighty Mouse Technical Reference Complete Product Specification Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)

More information