17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
|
|
- Cornelius Jacobs
- 5 years ago
- Views:
Transcription
1 17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors are supplied with screw-machined contacts which are fixed in the insulator. The board-mount product offering includes straight and right-angle terminations. The cable connectors are available in crimp and solder terminations. These connectors are compatible with the infra-red reflow soldering process. The 17TW series offers eighteen housing configurations in five shell sizes. Industrial Telecom ny industry standard I / O connections SPEIFITIONS: MTERILS N PLTINGS Shells Steel with tin plating or yellow chromate with or without grounding dimples Insulators High temperature black thermoplastic Signal ontacts Female Machined bronze Male Machined brass Plating 16µ"(.40µm) or 30µ"(.76µm) gold over 79µ"(1.97µm) nickel oax ontacts Female Machined bronze Male Machined brass Plating Inner conductor: 16µ"(.40µm) gold or 30µ"(.76µm) gold over 79µ"(1.97µm) nickel Outer ring: 10µ"(.25µm) gold over 79µ"(1.97µm) nickel Terminations Tinned. (Solder cup and crimp terminations are gold flash.) Power ontacts Female Machined bronze Male Machined brass Plating ontacts: 16µ"(.40µm) gold or 30µ"(.76µm) gold over 79µ"(1.97µm) nickel Terminations Tinned. (Solder cup and crimp terminations are gold flash.) rackets Steel with tin plating Front Jackscrews rass with tin plating or yellow chromate Rear linch Nuts rass with tin plating or yellow chromate oardlocks: ronze with tin plating Stand-offs rass with tin plating ELETRIL T urrent Rating: Signal ontacts 7.5 amps with 10 amp peaks Power ontacts: P, Solder-up, rimp 10 to 40 amps 0.5 amps urrent Rating: Signal & Power ontacts 300 VRMS at 50 Hz oax ontacts 150 VRMS at 50 Hz oax ontacts Frequency range: 0-1 GHz ttenuation: 0.2 d V.S.W.R.: 1.4 (+0.04/GHz) haracteristic Impedance 50 Ohms ielectric Withstanding Voltage 1000V R.M.S. at 50Hz Insulation Resistance 5000 megaohms at 500 V.. ontact Resistance 5 milliohms Shell Resistance (electrical grounding) 1 milliohm LIMTI T Shell Resistance (electrical grounding) 1 milliohm Operating Temperature 67 F (-55 ) to 311 F (+155 ) with peaks up to 356 F (180 ) amp Heat 56 days 104 F (40 ) at 95% RH Salt Spray 48 hours MEHNIL T ontact Retention Force in ielectric Material >40 N Maximum Mating and Unmating Force with dimples size: 80 N size: 100 N size: 150 N size: 180 N E size: 70 N without dimples size: 50 N size: 80 N size: 120 N size: 160 N E size: 30 N Process ompatibility IR - air convection: 500 F (260 ) for 20 seconds Soldering iron: 500 F (260 ) for 30 seconds Mating ycles 200 (16µ"(.41µm) gold) 500 (30µ"(.76µm) gold) lind Mating System vailable upon request Polarization vailable with locking accessories, consult factory erating urves for Power ontacts: see page 51 Pull-out Force for rimped ontacts: see page 51 pprovals: UL - File number: E / S - File number: LR Shell imensions: See page 64
2 Hybrid onnector 17 TW SERIES SHELLS N ONTT PLTING LSS I 30µ (0.76µm) u contacts gold plating 500 mating cycles LSS II 16µ (0.4µm) u contacts gold plating 200 mating cycles Types Shells and plating Types Shells and plating 117 TW Yellow chromated shell Male and female 177 TW Tin plated shell Female 777 TW Tin plated shell with dimples Male only NOTE: Tin plated shells standard 17 TW Yellow chromated shell Male and female 77 TW Tin plated shell Female 717 TW Tin plated shell with dimples Male only NOTE: Tin plated shells standard HOUSING RRNGEMENTS Male front view rrangement Shell size E rrangement Shell size rrangement Shell size rrangement Shell size rrangement Shell size rrangement Shell size INHES (MM)
3 17 TW SERIES Hybrid onnector Solder up Signal nd Vertical oard Mount ORERING INFORMTION XXX - X - XWX - X - XXXX - XX - XXXX - X ontact & Shell Plating Prefix Shell Plating ontact Yellow Tinned Tinned & Plating hromate Indents* Special eviations High voltage contacts Fiberoptic contacts onsult factory 16µ(0.4µm) 17TW 77TW 717TW gold over nickel 30µ(0.76µm) 117TW 177TW 777TW gold over nickel Shell Size E *plug only onfiguration (see page 38.) 5W1 3W3 7W2 11W1 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21W4 25W3 27W2 24W7 36W4 43W2 (onsult factory for size availability) ode P S ontact Type Pin (male) Socket (female) oard Mounting Options (see page 40.) blank.122 (3.10) mounting hole RM53 Snap-in standoff boardlock, M3 threaded on panel-mount side RM54 Snap-in standoff boardlock, 4 40 UN 2 threaded on panel mount side RM83 Snap-in standoff boardlock with non-removable M3 threaded female screwlock on panel-mount side RM84 Snap-in standoff boardlock with non-removable 4-40 UN 2 threaded female screwlock on panel-mount side Panel Mounting Options (see page 40.) blank.122 (3.10) mounting hole 4F 4-40 Front female screwlock 4R 4-40 Rear screwlock 3F M3 Front female screwlock 3R M3 Rear screwlock 514 lind mating system Loaded ontacts blank Solder-cup signal contacts only - (order pwr/coax contacts separately) (See pages ) P3SY 40 amp power and signal combination P2SY 20 amp power and signal combination SY oax and signal combination SY Signal only P3Y 40 amp power only (3W3, 5W5, 8W8) P2Y 20 amp power only (3W3, 5W5, 8W8) Y oax only (3W3, 5W5, 8W8) oard Mount Only For Filtered ombo s, see page 56.
4 Hybrid onnector Solder up Signal nd Vertical oard Mount 17 TW SERIES Straight version lank:.122 (3.10) dia. mounting hole RM54: RM threaded RM53: RM5 M3 threaded RM84: RM threaded RM83: RM8 M3 threaded 514: blind mating system FM: float mounting system 4R: 4.40 rear nut 3R: M3 rear nut 4F: 4.40 front female screwlock 3F: M3 front female screwlock Signal tail.0236 (0.6) dia..063 (1.6) P For other P thickness: consult factory. escription imensions a b Power.126 (3.20) tail dia (4.50).283 (7.2) Power.0787 (2.0) tail dia (4.50).283 (7.2) Shielded (4.00).283 (7.2) Signal (5.00).453 (11.50) INHES (MM)
5 17 TW SERIES enotes right angle dimensions
6 Hybrid onnector Solder up Signal nd Vertical oard Mount 17 TW SERIES enotes right angle dimensions INHES (MM)
7 17 TW SERIES Hybrid onnector Solder up Signal nd Vertical oard Mount enotes right angle dimensions
8 Hybrid onnector Right-ngle oard Mount 17 TW SERIES ORERING INFORMTION XXX - X - XWX - X - XXXX - XX - XXXX - X ontact & Shell Plating Prefix Shell Plating ontact Yellow Tinned Tinned & Plating hromate Indents* Special eviations High voltage contacts Fiber Optic contacts onsult factory 16µ(0.4µm) 17TW 77TW 717TW gold over nickel 30µ(0.76µm) 117TW 177TW 777TW gold over nickel *plug only oard Mounting Options (see page 48.) blank.122 (3.10) mounting holes in metal brackets RM6 Snap-in boardlocks mounted on metal brackets Shell Size onfiguration (see page 38.) E 5W1 3W3 7W2 11W1 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21W4 25W3 27W2 24W7 36W4 43W2 (onsult factory for size availability) ode P S ontact Type Pin (male) Socket (female) Panel Mounting Options (see page 48.) blank.122 (3.10) mounting hole 4F 4-40 Front female screwlock 4R 4-40 Rear screwlock 3F M3 Front female screwlock 3R M3 Rear screwlock 514 lind mating system: Loaded ontacts (see page 48.) MP3SV US footprint, 40 amp power and signal combination MP2SV US footprint, 20 amp power and signal combination MSV US footprint, coax and signal combination MSV US footprint, signal only MP3V US footprint, 40 amp power only (3W3, 5W5, 8W8) MP2V US footprint, 20 amp power only (3W3, 5W5, 8W8) MV US footprint, coax only (3W3, 5W5, 8W8) EP3SV European footprint, 40 amp power and signal combination EP2SV European footprint, 20 amp power and signal combination ESV European footprint, signal only EP3V European footprint, 40 amp power only (3W3, 5W5, 8W8) EP2V European footprint, 20 amp power only (3W3, 5W5, 8W8) HP3SV Mixed footprint, 40 amp power and signal combination HP2SV Mixed footprint, 20 amp power and signal combination HSV Mixed footprint, coax and signal combination HSV Mixed footprint, signal only HP3V Mixed footprint, 40 amp power only (3W3, 5W5, 8W8) HP2V Mixed footprint, 20 amp power only (3W3, 5W5, 8W8) HV Mixed footprint, coax only (3W3, 5W5, 8W8) For Filtered ombo s, see page 56. INHES (MM)
9 17 TW SERIES Hybrid onnector Right-ngle oard Mount High power contacts Solder cup version P/N urrent imensions Plug Socket 17M M to 20 mp..071 (1.80).100 (2.55) 17M M to 30 mp..110 (2.80).145 (3.70) 17M M to 40 mp..189 (4.80).220 (5.60) Trim dimensions:.295 (7.5) rimp version.622 (16).622 (16).622 (16) P/N urrent imensions Plug Socket 17M M to 20 mp..071 (1.80).100 (2.55) 17M M to 30 mp..110 (2.80).145 (3.70) 17M M to 40 mp..189 (4.80).220 (5.60) Trim dimensions:.295 (7.5)
10 Hybrid onnector Right-ngle oard Mount 17 TW SERIES Straight shielded contacts rimp ferrule/inner solder Type P/N imensions able - RG Trim dimensions Max. E F G plug 17M (18.8).929 (23.6).039 (1.0) 178 /U.311 (7.9).248 (6.3).078 (2) plug 17M (18.8).929 (23.6).066 (1.7) 179 /U 316 /U.311 (7.9).248 (6.3).078 (2) plug 17M (21.5).929 (23.6).110 (2.8) 180 /U.374 (9.5).311 (7.9).078 (2) plug 17M (21.5).929 (23.6).126 (3.2) 58 /U.374 (9.5).311 (7.9).078 (2) socket 17M (18.8).929 (23.6).039 (1.0) 178 /U.311 (7.9).248 (6.3).078 (2) socket 17M (18.8).929 (23.6).066 (1.7) 179 /U 316 /U.311 (7.9).248 (6.3).078 (2) socket 17M (21.5).929 (23.6).110 (2.8) 180 /U.374 (9.5).311 (7.9).078 (2) socket 17M ( 21.5).929 (23.6).126 (3.2) 58 /U.374 (9.5).311 (7.9).078 (2) Ferrule and inner solder Type P/N imensions able - RG Trim dimensions Max. E F G short plug 17M (17.0).858 (21.8).039 (1.0) 178 /U.311 (7.9).248 (6.3).078 (2) plug 17M (18.8).929 (23.6).066 (1.7) 179 /U 316 /U.311 (7.9).248 (6.3).078 (2) plug 17M (21.5) (26.3).110 (2.8) 180 /U.374 (9.5).311 (7.9).078 (2) plug 17M (21.5) (26.3).126 (3.2) 58 /U.374 (9.5).311 (7.9).078 (2) plug 17M (18.8).929 (23.6).039 (1.0) 178 /U.311 (7.9).248 (6.3).078 (2) short socket 17M (17.0).858 (21.8).039 (1.0) 178 /U.311 (7.9).248 (6.3).078 (2) socket 17M (18.8).929 (23.6).066 (1.7) 179 /U 316 /U.311 (7.9).248 (6.3).078 (2) socket 17M (21.5) (26.3).110 (2.8) 180 /U.374 (9.5).311 (7.9).078 (2) socket 17M (21.5) (26.3).126 (3.2) 58 /U.374 (9.5).311 (7.9).078 (2) socket 17M (18.8).929 (23.6).039 (1.0) 178 /U.311 (7.9).248 (6.3).078 (2) INHES (MM)
11 17 TW SERIES Hybrid onnector Right-ngle oard Mount Right angled shielded contact rimp ferrule/inner solder Type P/N imensions able - RG Trim dimensions Max. E F G plug 17M (13.5).732 (18.6).492 (12.5).039 (1.0) 178 /U.374 (9.5).232 (5.9).062 (1.6) plug 17M (13.5).732 (18.6).492 (12.5).066 (1.7) 179 /U 316 /U.374 (9.5).232 (5.9).062 (1.6) plug 17M (13.5).732 (18.6).602 (15.3).110 (2.8) 180 /U.421 (10.7).311 (7.9).094 (2.4) plug 17M (13.5).732 (18.6).602 (15.3).126 (3.2) 58 /U.421 (10.7).311 (7.9).094 (2.4) socket 17M (13.5).732 (18.6).492 (12.5).039 (1.0) 178 /U.374 (9.5).232 (5.9).062 (1.6) socket 17M (13.5).732 (18.6).492 (12.5).066 (1.7) 179 /U 316 /U.374 (9.5).232 (5.9).062 (1.6) socket 17M (13.5).732 (18.6).602 (15.3).110 (2.8) 180 /U.421 (10.7).311 (7.9).094 (2.4) socket 17M (13.5).732 (18.6).602 (15.3).126 (3.2) 58 /U.421 (10.7).311 (7.9).094 (2.4) Ferrule and inner solder Type P/N imensions able - RG Trim dimensions Max. E F G plug 17M (13.5).732 (18.6).492 (12.5).039 (1.0) 178 /U.374 (9.5).232 (5.9).062 (1.6) plug 17M (13.5).732 (18.6).492 (12.5).066 (1.7) 179 /U 316 /U.374 (9.5).232 (5.9).062 (1.6) plug 17M (13.5).732 (18.6) 13.9 (.547).110 (2.8) 180 /U.421 (10.7).311 (7.9).094 (2.4) plug 17M (13.5).732 (18.6) 13.9 (.547).126 (3.2) 58 /U.421 (10.7).311 (7.9).094 (2.4) socket 17M (13.5).732 (18.6).492 (12.5).039 (1.0) 178 /U.374 (9.5).232 (5.9).062 (1.6) socket 17M (13.5).732 (18.6).492 (12.5).066 (1.7) 179 /U 316 /U.374 (9.5).232 (5.9).062 (1.6) socket 17M (13.5).732 (18.6) 13.9 (.547).110 (2.8) 180 /U.421 (10.7).311 (7.9).094 (2.4) socket 17M (13.5).732 (18.6) 13.9 (.547).126 (3.2) 58 /U.421 (10.7).311 (7.9).094 (2.4) rimping tool Hand crimp tool (without dies) (M /5-01) RG cables MIL reference mphenol P/N dim. between 2 flat surface cavity cavity RG 58 /U M / (5.41) RG 178 /U M / (2.67) RG 179 /U M / (3.25) RG 180 /U M / (4.52)
12 Hybrid onnector Right-ngle oard Mount 17 TW SERIES MOUNTING OPTIONS Right angle version onnectors come equipped with metal brackets lank:.122 (3.10) dia mounting hole RM6: metal brackets + boardlock 4R: 4.40 rear nut 3R: M3 rear nut 4F: 4.40 front female screwlock 3F: M3 front female screwlock ONTT IMENSIONS Signal tail.0236 (0.6) dia..063 (1.6) P For other P thickness: consult factory. Europe HE 5 pattern = European height European footprint pitch between 2 rows:.100 (2.54) Mix Mixed pattern = MIL height European footprint pitch between 2 rows:.100 (2.54) escription rawing a b c a b c a b c Shielded (10.30) (6.30) (10.00) (10.30) (6.30) (10.00) Signal 2 (10.30) (7.20) (11.20) (10.30) (6.30) (9.50) (8.10) (6.30) (9.50) Power.0787 (2.0) tail dia (11.57) (7.20) (10.50) (11.57) (6.30) (9.50) (9.52) (6.30) (9.50) Power.126 (3.2) tail dia (21.46) (7.20) (10.50) (21.46) (6.30) (9.50) (21.46) (6.30) (9.50) NOTE: imensions above correspond to sizes E to. onsult factory for size connectors. onnector comes equipped with contacts and brackets. INHES (MM) MIL MIL height MIL footprint pitch between 2 rows:.112 (2.84)
13 17 TW SERIES Hybrid onnector Right-ngle oard Mount abling instructions for shielded contacts Straight crimp shielded contacts: inner solder contact outer crimp contact 1.26 (3.2) Right angle crimp shielded contacts: inner solder contact outer crimp contact 1.26 (3.2) SSEMLY METHO 1. Slide the outer ring over the cable jacket. Trim the cable according to the recommended dimensions. 2. Insert the cable dielectric and the center conductor inside the inner sleeve. 3. Solder the central conductor to the shielded center contacts. 4. Slide the outer ring towards the inner sleeve and recover the braid. 5. Using crimp hand tool equipped with the appropriate dies, crimp in the area defined. Solder straight shielded contacts Solder right angle shielded contacts SSEMLY METHO 1. Slide the outer ring over the cable jacket. Trim the cable according to the recommended dimensions. 2. Insert the cable dielectric and the center conductor inside the inner sleeve. 3. Solder the central conductor to the shielded center contacts. 4. Slide the outer ring towards the inner sleeve and recover the braid. 5. Solder by introducing metal through the outer ring hole.
14 Shell Size imensions 17 TW SERIES Shell ontact / / E F F / G G / H J Size P: Pin ±.010 0/ /0 ±.004 0/ /0 ± / / /.008 ± / /-.020 S: Socket (±0.25) (0/-0.20) (+0.20/0) (±0.10) (0/-0.25) (+0.25/0) (±0.20) (+0.05/-0.20) (+0.10/-0.20) (+0.10/-0.20) (±0.10) (+0.10/-0.40) (0/-0.50) E P S P S P S P S P S (16.8).984 (8.2).488 (10.9) (5.9) (30.7).646 (25.0).315 (12.4) (19.4) (11.0) (16.4) (8.0) (11.1) (6.2) (25.1) (8.2).488 (10.9) (5.9) (39.0).976 (33.3).315 (12.4) (27.7) (11.0) (24.8) (8.0) (11.1) (6.2) (38.8) (8.2).488 (11.0) (5.8) (52.9) (47.0).315 (12.4) (41.4) (11.0) (38.5) (8.0) (11.1) (6.2) (55.3) (8.2).488 (11.0) (5.8) (69.2) (63.5).315 (12.4) (57.9) (11.0) (54.9) (8.0) (11.1) (6.2) (52.7) (11.0).598 (11.0) (5.8) (66.8) (61.1).429 (15.2) (55.5) (13.8) (52.5) (10.9) (11.1) (6.2) Panel utouts Optimal cutout for rear mounting Standard cutout Shell Mounting E F G H J Size Method ±.008 ±.008 ±.008 ±.008 ±.008 ±.008 ±.008 ±.008 ±.008 E Front Rear Front Rear Front Rear Front Rear Front Rear (±0.20) (±0.20) (±0.20) (±0.20) (±0.20) (±0.20) (±0.20) (±0.20) (±0.20) (22.2) (11.1) (13.0) (6.5) (2.1) (25.0) (12.5) (3.0) (1.5).0134 (20.5) (10.2) (11.4) (5.7) (3.4) (30.5) (15.3) (13.0) (6.5) (2.1) (33.3) (16.7) (3.0) (1.5).0134 (28.8) (14.4) (11.4) (5.7) (3.4) (44.3) (22.1) (13.0) (6.5) (2.1) (47.0) (23.5) (3.0) (1.5).0134 (42.5) (21.3) (11.4) (5.7) (3.4) (60.7) (30.4) (13.0) (6.5) (2.1) (63.5) (31.7) (3.0) (1.5).0134 (59.1) (29.5) (11.4) (5.7) (3.4) (58.3) (29.2) (15.8) (7.9) (2.1) (61.1) (30.6) (3.0) (1.5).0134 (56.3) (28.2) (14.1) (7.1) (3.4) INHES (MM)
15 17 TW SERIES Hybrid onnector Test ata ERTING URVE FOR HIGH POWER ONTTS (Size 8) URRENT RTING N OPERTING TEMPERTURE Tested according to E , test 5b F Temperature ERTING URVE FOR SIGNL ONTTS (Size 20) URRENT RTING N OPERTING TEMPERTURE Tested according to E I 512-3, test 5b F Temperature WIRE RETENTION FORE ON RIMP ONTTS REKOWN VOLTGE The following chart indicates the voltage rating ( - Vrms - 50 Hz) and breakdown voltage for an operating temperature of 77 O F (25 O ) under 50% relative humidity. Voltages are applied to male and female connectors mated or unmated Sea Level 19,685 (6,000 m) 68,898 (21,000 m) ontact Types Excitation Test Excitation Test Excitation Test oax 1300 V 900 V 900 V 600 V 400 V 300 V Power 1500 V 1000 V 1000 V 600 V 500 V 300 V Voltage 3800 V 2800 V 2300 V 1700 V 650 V 450 V
FILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationGecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
More informationCatalog C-001 Rev. G
atalog -001 Rev. G Experience Founded in 1966 Involvement in the development of international connector specifi cations through EI, IE and ISO as well as PIMG. Introduction of new and unique connector
More informationMIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
More informationMCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
More informationconnectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE
connectors range Special OMMIL SU-MINITU Standard HIGH POMN SU-MINITU LXIL N ST SSMLY SU-MINITU High ensity INS NSITY SU-MINITU ccessories onnectors Special OMMIL SU-MINITU Special range of connectors
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationPCB layouts. High Density D only. 50 way 50 way DIMENSIONS. 15 way High Density D 26 way High Density D. 62 way High Density D. 44 way High Density D
Straight p.c. - way 0º p.c. - way P layouts 2.84 S 2 Ø 0.76 min. S 2 Ø 0.76 min. Plug viewed from above, socket viewed from below. 2 holes at Ø 3.2 min. (2 holes at Ø 3.0/3. boardlock only)* ONT 2 holes
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationBodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
More informationSMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationAMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
More informationMCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationGecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.
onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts
More informationThe Centi Line -.075" Contact Spacing
The enti Line -.075" ontact Spacing The annon enti connectors are especially suitable for commercial applications such as computers, instrumentation, communications and audio equipment. They are available
More informationMicrominiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne
More informationSMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationAmphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
More informationMCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationPRODUCT SPECIFICATION
PROUCT SPECIFICATION TABLE OF CONTENTS 1.0 SCOPE 2.0 PROUCT ESCRIPTION 3.0 APPLICABLE OCUMENTS AN SPECIFICATIONS 4.0 RATINGS 5.0 PERFORMANCE 5.1 ELECTRICAL PERFORMANCE 5.2 MECHANICAL PERFORMANCE 5.3 ENVIRONMENTAL
More informationConnectors Conforming to European Safety Standards
Series RoS ompliant onnectors onforming to European Safety Standards s of January 1995 all industrial machinery, including machine tools, which are exported to Europe must conform with European safety
More information8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
More information... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
More informationC&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
More informationRP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
More informationContact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
More informationD-SUB Series. Electrical Max current rating per contact : 7.5 A. Insulation resistance : 5000 MΩ Contact resistance : 10 mω
-SU Series pplications For military and aerospace applications. s MiL- 24308 HE 501 HE 508 HE 507 haracteristics Mechanical Shell : cadmium plated steel Insulator : monothermoset and two parts thermoplastics
More informationContact resistance : environmental class hermetic class
525 eries pplications or all general purposes in civil aeronautical applications tandards N 93422 32 NL 5413 N 1599 M T1 list LN 2954 escription Light weight version of MIL 2642 eries II Intermateable
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
80 Mighty Mouse Technical Reference Reference SRIPTION RQUIRMNT PROUR TRI ontact resistance S S39029 Table V Max Wire Test Voltage Size urrent rop 12 23 42 14 17 40 16 13 49 20 7.5 55 22 5 73 24 3 45 26
More information1Rack and Panel Connectors
Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3
More informationMODULAR TELEPHONE JACKS
dam Technologies, Inc. MODULR TELEPHONE JKS INTRODUTION: dam Tech MTJ series Modular Telephone Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules
More informationfor Quadrax and ELIO 8
1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467
More informationMICRO-CONNECTOR CMM SERIES
MICRO-CONNECTOR CMM SERIES CMM Series Micro-connectors NICOMATIC specializes in the design, development and manufacture of electronic connectors. The CMM MICRO CONNECTOR interconnection system is a 2mm
More informationPRODUCT SPECIFICATION
MICRO-FIT BMI FLOATING CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector system terminated with 20 to 30 AWG wire using crimp technology
More informationConnectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
More informationSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
More informationFAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied
More informationHyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationMIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors
MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationµcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the
More informationRP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
More information8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationMicro-D Printed Circuit Board Connectors
PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the
More informationMIL-C 26482G Series II
pplications or all general purposes in military applications Standards MIL 2642 Series II QPL approved escription Standard version luminium alloy : olive green, nickel or, black, anodized plating ayonet
More informationODU-MINI-SNAP. Series F - IP50 and IP68 FP-Locking Concept Keying with Halfshells. Series F
OU-MINI-SNAP Series - IP and IP68 P-Locking oncept Keying with Halfshells Series OU-MINI-SNAP Series The Push-Pull Locking Principle: P Locking roove onical Sleeve Locking ingers Outer Housing Back Nut
More informationAMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
More informationF-Series General Specifications
arling F-Series General Specifications F-Series breakers are available up to 700, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method
More informationMS/Standard DL-Class Pre-Earth type
MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
More informationPRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
More informationSMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationDEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5
DEUTSCH HDJ Series connectors are subminiature environment-class connectors with high and medium-density insert arrangements. They are based on MIL-DTL-38999 Series I coupling interface lengths and Series
More information3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810
1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9
More information- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
More informationI Non-magnetic D-Sub Connectors
Non magnetic D-Sub Connectors Section I Non-magnetic D-Sub Connectors 5 Non magnetic D-Sub Contents Non magnetic D-Sub Connectors Cross reference table for ESA/SCC/SOURIAU/GSFC...7 Quality Assurance Testing...7
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationARINC 600 SERIES. Rack & Panel Rectangular Connectors. Selector Guide
ARIN 600 ERIE Rack & Panel Rectangular onnectors elector Guide ARIN 600 eries Overview Typical applications ockpit Display Units Mario Beauregard / Fotolia ourtesy of NORD-MIRO Picture All Rights Reserved
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationSERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationMicro-D Metal Shell -.050" Contact Spacing
Micro Metal Shell.050" ontact Spacing Specifications connectors are used in applications requiring highly reliable, extremely small, lightweight connectors with higher density contact configurations than
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More informationMicro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationMICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction
MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The
More informationCannon 50 Ohm RF Connectors. Electronic Components
Cannon 50 Ohm RF Connectors Electronic Components Over 90 year history... ITT Electronic Components is an innovative and dynamic company with the in-depth experience of a 90 plus year industry leader.
More informationRECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES
Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification
More informationFeatures/Benefits. Typical Applications
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with or without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More informationD*MA Standard Density Crimp Contact Cable Connector
annon rimp, Size 20 *M Standard ensity rimp ontact able onnector or contact cavity arrangements, see pages -44. or panel cutouts, see page -49. ngaging ace Shell Size ayout ual Through Hole loat Mount
More informationPROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
More informationDT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30
ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories
More information