MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
|
|
- Caitlin Mason
- 5 years ago
- Views:
Transcription
1 Section Index Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount Other Information Assembly Instructions Cable Assembly Cable Information Numerical Index Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by 16 Tel: u Fax: info@rfconnector.com
2 Specifications microminiature connectors are suitable for 50 ohm applications and provide repeatable performance from DC to 6 GHz. The snap-on coupling feature allows ease of assembly in dense packaging layouts. The design of the connector encompasses the need for size reduction, low weight, durability and reliable performance. connectors enable a 30% space reduction over similar SMB/SMC types. LTI connectors are designed to conform to CECC specifications. Typical applications for connectors include GPS, wireless communications and automotive. Interface Mating Dimensions PLUG Letter Minimum Maximum A B C D E F G DIMENSIONS ARE IN MILLIMETERS Letter Minimum Maximum A B C D E F G DIMENSIONS ARE IN MILLIMETERS JACK 17
3 Specifications ELECTRICAL RATINGS Impedance 50 ohm Frequency Range DC to 6 GHz Cable Type Dielectric Withstanding Voltage (at sea level, in V rms, 50 Hz) RG-174,188,316; min 1000 min Working Voltage (at sea level, in V rms, 50 Hz) RG-178,196; max 335 max Insulation Resistance MΩ min Insertion Loss.1 db 1.0 GHz Contact Resistance Center Contact Outer Contact 5 mω max 1 mω max MECHANICAL RATINGS Mating Snap-on coupling Durability 500 matings Engagement Force 5.6 lbs. max Disengagement Force Between 1.8 lbs. and 4.5 lbs. Contact Captivation 4.5 lbs. min Cable Retention RG-174, 188, 316 RG-178, lbs. min 7.3 lbs. min ENVIRONMENTAL RATINGS Temperature Range -65 C to C Vibration MIL-STD-202, Method 204, Condition B Corrosion MIL-STD-202, Method 101, Condition B Temperature Cycling MIL-STD-1344, Method 1003, Condition A MATERIALS Material Plating Connector Body Brass per QQ-B-626 Gold/Nickel Center Contact Male Brass per QQ-B-626 Gold Female Beryllium Copper per QQ-C-530 Gold Insulator Teflon None Crimp Ferrule Annealed Copper per WW-T-799 Same as body VSWR Cable Type Frequency Range 1 GHz 3 GHz 5 GHz RG-55, 142, 223, RG RG-174, 188, RG-178, Semi-rigid RG-174, 188, RG-178, Semi-rigid Semi-rigid Typical VSWR for straight connectors Typical VSWR for right angle connectors 18
4 Flexible Cable Straight Crimp Plug Cable Type Dimension LTI-MXSM11GT-XXX RG-316,174,188,Q1,D316 A: 1.7 B: 2.7 LTI-MXSM11GT-XXX RG-178,196 A: 1.0 B: 1.7 LTI-7MXSM11GT-179 RG-179 (75 ohm) A: 1.7 B: 2.7 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page XX for more info. Nickel plated parts (LTI-MXSM11NT-XXX) available. ASSEMBLY INST.: Page 176 Page 172, Line 5 Straight Crimp Plug Cable Type LTI-MXSM11GT-XXX RG-58, 142, 55, 223, 400 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-MXSM11NT-XXX) available. Call ASSEMBLY INST.: Page 176 Page 172, Line 5 Right Angle Crimp Plug Cable Type Dimension LTI-MXLM11GT-XXX RG-316,174,188;Q1,D316 A: 1.7 B: 2.7 LTI-MXLM11GT-XXX RG-178,196 A: 1.0 B: 1.7 LTI-7MXLM11GT-179 RG-179 (75 ohm) A: 1.7 B: 2.7 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-MXLM11NT-XXX) available. ASSEMBLY INST.: Page 177 Page 172, Line 5 Straight Crimp Jack Cable Type Dimension LTI-MXSF11GT- XXX RG-316,174,188;Q1,D316 A: 1.7 B: 2.7 LTI-MXSF11GT- XXX RG-178,196 A: 1.0 B: 1.7 LTI-7MXSF11GT-179 RG-179 (75 ohm) A: 1.7 B: 2.7 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-MXSF11NT-XXX) available. ASSEMBLY INST.: Page 176 Page 172, Line 6 19
5 Flexible Cable/Semi-Rigid Cable Bulkhead Crimp Jack Cable Type Dimension LTI-MXSF13RGT-XXX RG-316,174,188;Q1,D316 3 A: 1.7 B: 2.7 LTI-MXSF13RGT-XXX RG-178,196 3 A: 1.0 B: 1.7 LTI-7MXSF13RGT-179 (75ohm) RG A: 1.7 B: 2.7 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-MXSF13RNT- XXX) available. Call for min order reqs. MOUNTING HOLE (): Page 174 ASSEMBLY INST.: Page 176 Page 172, Line 40 Straight Plug for Semi-Rigid Cable Cable Type Dimension LTI-MXSM31GT-047 Semi-Rigid.047 A: 1.2 B: 2.2 LTI-MXSM31GT-086 Semi-Rigid.086 A: 2.3 B: 3.2 Nickel plated parts (LTI -MXSM31NT-XXX) available. ASSEMBLY INST.: Page 180 Page 173, Line 5 Straight Plug for Semi-Rigid Cable Cable Type LTI-MXSM31GT-141 Semi-Rigid.141 Nickel plated parts (LTI -MXSM31NT-141) available. Call ASSEMBLY INST.: Page 180 Page 173, Line 5 Right Angle Plug for Semi-Rigid Cable Cable Type Dimension LTI-MXLM31GT-047 Semi-Rigid.047 A: 1.2 B: 2.2 LTI-MXLM31GT-086 Semi-Rigid.086 A: 2.3 B: 3.2 LTI-MXLM31GT-141 Semi-Rigid.141 A: 3.65 B: 4.8 Nickel plated parts (LTI-MXLM31NT-XXX) available. ASSEMBLY INST.: Page 181 Page 173, Line 4 20
6 Semi-Rigid Cable/Panel Mount Straight Jack for Semi-Rigid Cable Cable Type Dimension LTI-MXSF31GT-047 Semi-Rigid.047 A: 1.2 B: 2.2 LTI-MXSF31GT-086 Semi-Rigid.086 A: 2.3 B: 3.2 LTI-MXSF31GT-141 Semi-Rigid.141 A: 3.65 B: 4.8 Nickel plated parts (LTI-MXSF31NT-XXX) available. ASSEMBLY INST.: Page 180 Page 173, Line 3 Bulkhead Solder Jack for Semi-Rigid Cable Cable Type LTI-MXSF33RGT Semi-Rigid.086 Nickel plated parts (LTI-MXSF33RNT-XXX) available. MOUNTING HOLE (): Page 174 ASSEMBLY INST.: Page 180 Page 173, Line 3 2-Hole Panel Mount Jack With Solder Post and Extended Dielectric LTI-MXSF92DNFGT 34 LTI-7MXSF92DNFGT (75 ohm) 34 Nickel plated parts (LTI-MXSF92DNFNT) available. Flush 2-Hole Panel Mount Jack With Solder Post Termination LTI-MXSF92UNFGT 35 LTI-7MXSF92UNFGT (75 ohm) 35 Nickel plated parts (LTI-MXSF92UNFNT) available. 21
7 PCB Mount Straight PCB Mount Plug LTI-MXSM54GT 22 LTI-7MXSM54GT (75 ohm) 22 Nickel plated parts (LTI -MXSM54NT) available. Call MOUNTING HOLE (): Page 174 Right Angle PCB Mount Plug LTI-MXLM54GT 22 LTI-7MXLM54GT (75 ohm) 22 Nickel plated parts (LTI-MXLM54NT) available. Call MOUNTING HOLE (): Page 174 Straight PCB Mount Jack LTI-MXSF54GT 22 LTI-7MXSF54GT (75 ohm) 22 Nickel plated parts (LTI-MXSF54NT) available. Call MOUNTING HOLE (): Page 174 Right Angle PCB Mount Jack LTI-MXLF54GT 22 LTI-7MXLF54GT (75 ohm) 22 Nickel plated parts (LTI-MXLF54NT) available. Call MOUNTING HOLE (): Page
8 PCB Mount Right Angle Bulkhead PCB Thru Hole Jack LTI-MXLF543GT 26 LTI-7MXLF543GT (75 ohms) 26 Nickel plated parts (LTI-MXLF543NT) available. MOUNTING HOLE (): Page 174 End Launch Plug LTI-MXSM55GT LTI-7MXSM55GT (75 ohm) Nickel plated parts (LTI-MXSM55NT) available. End Launch Jack, Short LTI-MXSF55ZGT LTI-7MXSF55ZGT (75 ohm) Nickel plated parts (LTI-MXSF55ZNT) available. End Launch Jack LTI-MXSF55GT LTI-7MXSF55GT (75 ohm) Nickel plated parts (LTI-MXSF55NT) available. 23
9 PCB Mount End Launch Jack, Long LTI-MXSF55LGT LTI-7MXSF55LGT (75 ohm) Nickel plated parts (LTI-MXSF55LNT) available. End Launch Bulkhead Jack LTI-MXSF553GT 4 LTI-7MXSF553GT (75 ohm) 4 Nickel plated parts (LTI-MXSF553NT) available. MOUNTING HOLE (): Page 174 Edge Mount Jack LTI-MXSF56GT 18 LTI-7MXSF56GT (75 ohm) 18 Nickel plated parts (LTI-MXSF56NT) available. Call MOUNTING HOLE (): Page 174 Edge Card Surface Mount Jack LTI-MXSF96GT LTI-7MXSF96GT (75 ohm) Nickel plated parts (LTI-MXSF96NT) available. 24
10 PCB Mount Vertical Surface Mount Jack LTI-MXSF66GT 21 LTI-7MXSF66GT (75 ohm) 21 Nickel plated parts (LTI-MXSF66NT) available. Call MOUNTING HOLE (): Page 174 Vertical Surface Mount Jack, Long Version LTI-MXSF66LGT 48 LTI-7MXSF66LGT (75 ohm) 48 Nickel plated parts (LTI-MXSF66LNT) available. MOUNTING HOLE (): Page 175 Right Angle Surface Mount Jack LTI-MXLF66GT 21 LTI-7MXLF66GT (75 ohm) 21 Nickel plated parts (LTI-MXLF66NT) available. Call MOUNTING HOLE (): Page
SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationBodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More information... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
More informationMCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
More informationSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationMCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationSMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
More informationInterface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
More informationSERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
More informationAmphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
More informationSMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
More informationSERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationsmpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
More informationmcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
More informationTable of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
More informationOur Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
More information2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
More information2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
More informationTNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
More informationType N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
More information- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
More informationBLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
More informationSMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM
29 High Frequency Push-on Application Notes The connector, which is 30% smaller than its cousin, the, has similar features and applications. This is a multi-functional high frequency push-on connector
More informationRF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
More informationCannon 50 Ohm RF Connectors. Electronic Components
Cannon 50 Ohm RF Connectors Electronic Components Over 90 year history... ITT Electronic Components is an innovative and dynamic company with the in-depth experience of a 90 plus year industry leader.
More informationBroadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
More informationRP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
More informationRF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001
Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationSMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
More informationRP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
More informationPlug (male) Jack (female) Interface dimensions conformable to the standards: min. max. min. max. A B C D E H I
Plug (male) Plug Jack min. max. min. max. A B C D E H I Jack (female) Interface dimensions conformable to the standards: 279 Electrical data Requirements Mechanical data Requirements Environmental data
More informationUltra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
More informationFAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
More informationMMBX / MCX series R223 / R113 / R213
4 MMBX / MCX series R223 / R113 / R213 CONTENT Pages MMBX Introduction... 4-4 to 4-6 Interface... 4-7 Characteristics... 4-8 Plugs... 4-9 Receptacles... 4-9 to 4-10 Adapters... 4-11 emo board... 4-12
More informationAmphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
More informationBNC SERIES Miniature Coaxial Connectors
Miniature Coaxial Connectors Description favorite in the adaptation of a wide range of aerial rods, Jy Chyun s NC connectors feature an allencompassing antenna mount, backed by exceptional electrical characteristics,
More informationR Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
More informationPERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
More information1Rack and Panel Connectors
Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3
More informationArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
More information800 Pin Receiver and ITA Modules and Contacts 2
TABLE OF CONTENTS 800 Pin Signal Module 800 Pin Receiver and ITA Modules and Contacts 2 Interface Devices (IDs) CASS Receiver 4 Light Weight CASS Receiver 5 80 Series Receiver 6 CASS Connector Module Configuration
More informationSP Series - Part Numbering
SP Series - Part Numbering Features Push-pull self latching technology Ultra precision High contact density High reliability / durability High vibration and outer force resistance Applications Telecommunications
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationApr11 Rev A
Product Specification SMA In-Series Adapters 04Apr11 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) SMA In-Series Adapters.
More informationfor Quadrax and ELIO 8
1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467
More informationRF Coaxial Connectors SMZ (Type 43)
SMZ (Type 43) Introduction The ITT Cannon range of SMZ connectors are extensively used in 75 communication systems and have become the recognised standard in telecommunications in many parts of the world.
More informationN Series. N Type Connectors CONFORMING STANDARD SPECIFICATION MATERIAL/FINISH JIS-C-5411 MIL-C-39012
N Type Connectors N series is the most practical coaxial cable connectors for 7mm (inner diameter of outer conductor) of 50Ω group. High frequency performance is superior. Many types of connectors are
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationAssembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
More informationFISCHER ULTIMATE TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES
H CHAPTER PAGES FISCHER TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES IP68 to -0m / IP69 / Hermetic 60 EMC shielding High corrosion resistance 0,000 mating cycles H - FISCHER TM SERIES Table of contents
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
More informationonlinecomponents.com
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
More informationTriax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
More informationD X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
More informationSCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationPHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
More information*HDMI-STYLE WEATHERTIGHT CONNECTORS *HDMI-STYLE WEATHERTIGHT CONNECTORS NPB C714
601 E WILDWOOD VILLA PARK, IL 60181 P: 630.834.7504 F: 630.834.8540 WWW.CONXALL.COM FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when panel connector is rear mounted and mated to the cable)
More informationDATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
More informationConnectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationEthernet 100 Mbps Quadrax
Ethernet 100 Mbps Quadrax Quadrax Contact Today s technology for Airbone and Military equipment is more and more complex, requiring the management of an increasing flow of information at greater speeds.
More informationConnection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
More informationI Non-magnetic D-Sub Connectors
Non magnetic D-Sub Connectors Section I Non-magnetic D-Sub Connectors 5 Non magnetic D-Sub Contents Non magnetic D-Sub Connectors Cross reference table for ESA/SCC/SOURIAU/GSFC...7 Quality Assurance Testing...7
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationIntegrated Backshell Fire Proof Connector
8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines
More informationFISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationMICRO-CONNECTOR CMM SERIES
MICRO-CONNECTOR CMM SERIES CMM Series Micro-connectors NICOMATIC specializes in the design, development and manufacture of electronic connectors. The CMM MICRO CONNECTOR interconnection system is a 2mm
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationLMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS
LMR-195-LLPX LMR -195-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs Drop in replacement for RG-142 UL/NEC/CSA rated CMP/FT6 (listed under UL file #E-170516) Any wireless
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationv1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Copyright 2013 JAE Electronics, Inc.
v1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Application Examples Laptops, Desktops, Ultrabooks Audio/ Video editing equipment Display devices Adapter/
More informationFISCHER CORE SERIES STAINLESS STEEL
TECHNICAL SPECIFICATIONS FISCHER CORE SERIES Fischer Connectors SA All rights reserved Web version 1.6-06.2017 Changes without prior notice FISCHER CORE SERIES FISCHER CORE SERIES KEY FEATURES The Fischer
More informationMDM MDM MIL-DTL STYLE MIL-DTL STYLE. Applications. Features
MDM Applications Features MIL-DTL-83513 STYLE As the result of the miniaturization of today s sophisticated electronics where more and more electronics are being packed into smaller and lighter electronic
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationK CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationSMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More informationConnector for Internal Serial Transmission FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-4 June 2013 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
More informationFAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 Rev E
Application Specification 114-13069 FAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationOur Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
More informationSMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationDirectory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
More informationSPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
More information