LMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS
|
|
- Noah Lucas Spencer
- 5 years ago
- Views:
Transcription
1
2 LMR-195-LLPX LMR -195-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs Drop in replacement for RG-142 UL/NEC/CSA rated CMP/FT6 (listed under UL file #E ) Any wireless application (e.g. LMDS, MMDS, WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Cellular, PCS, Paging) requiring an easily routed, low loss RF cable for in-building systems LMR - LLPX is an indoor highly fire retardant cable intended specifically for runs within return air handling plenums (e.g. dropped ceilings, raised floors). It has a UL/NEC & CSA rating of CMP and FT6 respectively. Flexibility and bendability are hallmarks of the LMR- LLPX cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance. Low Loss is another hallmark feature of LMR- LLPX. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables. RF Shielding is 50 db greater than typical single shielded coax (40 db). The multi-ply bonded foil outer conductor is rated conservatively at > 90 db (i.e. >180 db between two adjacent cables). Weatherability: LMR-LLPX cables are designed for indoor Plenum applications. LMR-LLPX can also be used for applications that originate outdoors (e.g., rooftop) and subsequently enter the building. Connectors: A variety of connectors are available for LMR-LLPX cable, including the most common interface types. Most employ crimp outer attachment using standard hex crimp sizes. Cable Assemblies: All LMR-LLPX cable types are available as pre-terminated cable assemblies. Contact TMS for additional jacket colors Part Description Part No. Application Jacket Color Code LMRR-195-LLPX Indoor/Outdoor Plenum Fluoropolymer Red CMP/FT-6 Construction Specifications Description Material In. (mm) Inner Conductor Solid BC (0.94) Dielectric Low density PTFE (2.87) Outer Conductor Aluminum Tape (3.02) Overall Braid Tinned Copper (3.61) Jacket Red Fluoropolymer (4.45) Mechanical Specifications Bend Radius: installation in. (mm) 0.5 (12.7) Bend Radius: repeated in. (mm) 2.0 (50.8) Bending Moment ft-lb (N-m) 0.1 (0.14) Weight lb/ft (kg/m) 0.30 (0.05) Tensile Strength lb (kg) 40 (18.2) Flat Plate Crush lb/in. (kg/mm) 10 (0.18) Environmental Specifications 0 Performance Property F Installation Temperature Range -40/ /+125 Storage Temperature Range -40/ /+125 Operating Temperature Range -40/ /+125 Electrical Specifications Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay ns/ft (ns/m) 1.34 (4.40) Impedance ohms 50 Capacitance pf/ft (pf/m) 26.7 (87.6) Inductance uh/ft (uh/m) (0.22) Shielding Effectiveness db >90 DC Resistance Inner Conductor ohms/1000ft (/km) 7.6 (24.9) Outer Conductor ohms/1000ft (/km) 4.9 (16.1) Voltage Withstand Volts DC 1000 Jacket Spark Volts RMS 3000 Peak Power kw 2.5 o C 76 (800) TMS-COAX
3 Attenuation (db per 100 feet) Attenuation vs. Frequency (typical) LMR-195-LLPX ,000 Frequency (MHz) Frequency (MHz) Attenuation db/100 ft Attenuation db/100 m Avg. Power kw Calculate Attenuation = ( ) FMHz + ( ) FMHz (interactive calculator available at Attenuation: VSWR=1.0 ; Ambient = +25 C (77 F) Power: VSWR= 1.0; Ambient = +40 C; Jacket = +75 C (167 F); Sea Level; dry air; atmospheric pressure; no solar loading Connectors Inner Outer Finish* Part VSWR** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g) 1. N male Straight Plug TC-195-NMH-X <1.25:1 (2.5) Knurl Solder Crimp S/G 1.5 (38.1) 0.75 (19.1) (33.1) 2. N male Right Angle TC-195-NMH-RA-D <1.35:1 (6) Hex/Knurl Solder Crimp A/G 1.3 (32.1) 1.19 (30.1) (37.5) 3. SMA male Straight Plug TC-195-SM-SS-X <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) (6.8) 4. TNC male Straight Plug TC-195-TM-X <1.25:1 (2.5) Knurl Solder Crimp S/G 1.4 (35.6) 0.59 (15.0) (20.4) (20.4) 1 2 TC-195-NMH-RA-D TC-195-NMH-X TC-195-SM-SS-X TC-195-TM-X CT-240/200/195/ Install Tools Type Part Number Code Description RB-CST Crimp Tool CT-240/200/195/ Crimp tool for LMR-100, 195, 200 and 240 connectors Deburr Tool DBT-U Removes center conductor rough edges Cutting Tool CCT Cable end flush cut tool Replacement Blade RB Replacement blade for cutting tool Strip Tool CST-195/ Combination prep tool for LMR-195 & 200 Replacement Blade Kit RB-CST Replacement blade kit for all strip tools DBT-U CCT CST-195/ (800) TMS-COAX 77
4 LMR-200-LLPX LMR -200-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs UL/NEC/CSA rated CMP/FT6 (listed under UL file # E ) Any wireless application (e.g. LMDS, MMDS, WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Cellular, PCS, Paging) requiring an easily routed, low loss RF cable for in-building systems Part Description Part No. Application Jacket Color Code LMR-200-LLPX Indoor/Outdoor Plenum Fluoropolymer Red CMP/FT6 Environmental Specifications 0 Performance Property F Installation Temperature Range -40/ /+125 Storage Temperature Range -40/ /+125 Operating Temperature Range -40/ /125 o C Construction Specifications Description Material In. (mm) Inner Conductor Solid Bare Copper (1.02) Dielectric Low density PTFE (3.00) Outer Conductor Aluminum Tape (3.12) Overall Braid Tinned Copper (3.71) Jacket Red Fluoropolymer (4.45) Mechanical Specifications Bend Radius: installation in. (mm) 0.5 (12.7) Bend Radius: repeated in. (mm) 2.0 (50.8) Bending Moment ft-lb (N-m) 0.2 (0.27) Weight lb/ft (kg/m) (0.05) Tensile Strength lb (kg) 30 (13.6) Flat Plate Crush lb/in. (kg/mm) 65 (1.16) Electrical Specifications Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay ns/ft (ns/m) 1.34 (4.40) Impedance ohms 50 Capacitance pf/ft (pf/m) 26.7 (87.6) Inductance uh/ft (uh/m) (0.22) Shielding Effectiveness db >90 DC Resistance Inner Conductor ohms/1000ft (/km) 6.5 (21.3) Outer Conductor ohms/1000ft (/km) 4.9 (16.1) Voltage Withstand Volts DC 1000 Jacket Spark Volts RMS 3000 Peak Power kw (800) TMS-COAX
5 Attenuation (db per 100 feet) Attenuation vs. Frequency (typical) ,000 Frequency (MHz) Frequency (MHz) Attenuation db/100 ft Attenuation db/100 m Avg. Power kw Calculate Attenuation = ( ) FMHz + ( ) FMHz (interactive calculator available at VSWR = 1.0, Ambient = +40C; Jacket = +75C (167F); Sea Level; dry air; atmospheric pressure; no solar loading LMR-200-LLPX TC-200-BM TC-200-MUHF TC-200-NM TC-200-NM-RP Connectors Inner Outer Finish* Part VSWR ** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g) 1. BNC Male Straight Plug TC-200-BM <1.25:1 (2.5) Knurl Solder Crimp S/G 1.7 (43.2) 0.56 (14.2) (20.4) 2. Mini-UHF Straight Plug TC-200-MUHF <1.25:1 (2.5) Knurl Solder Crimp NG 1.1 (27.9) 0.45 (11.4) (6.8) 3. N Male Straight Plug TC-200-NM <1.25:1 (2.5) Knurl Solder Crimp S/G 1.5 (38.1) 0.75 (19.1) (33.1) 4. N Male Reverse Polarity TC-200-NM-RP <1:25:1 (2.5) Knurl Solder Crimp N/G 1.5 (38.0) 0.75 (19.1) (33.1) 5. TNC Male Straight Plug TC-200-TMC <1.25:1 (2.5) Knurl Solder Clamp S/G 1.7 (43.2) 0.59 (15.0) (20.4) 6. TNC Female Straight Jack TC-200-TF <1.25:1 (2.5) NA Solder Crimp N/G 1.3 (33.0) 0.57 (14.5) (15.0) 7. SMA -Male Straight plug TC-200-SM <1.25:1 (8) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) (6.8) 8. SMA-Rev.Polarity Straight Plug TC-200-SM-RP <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) (6.8) * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair GK-S200TT TC-200-TMC TC-200-TF Hardware Accessories Type Part Number Code Description Ground Kit GK-S200TT GK-S200TT Standard Ground Kit (each) TC-200-SM TC-200-SM-RP Install Tools Type Part Number Code Description CST-195/ Crimp Tool CT-240/200/195/ Crimp tool for LMR-100, 195, 200 and 240 connectors Deburr Tool DBT-U Removes center conductor rough edges Cutting Tool CCT Cable end flush cut tool Strip Tool CST-195/ Combination prep tool for LMR-195/200 Replacement Blade RB Replacement blade for cutting tool Replacement Blade Kit RB-CST Replacement Kit for all CST strip tools RB-CST CT-240/200/195/ CCT DBT-U (800) TMS-COAX 79
6 LMR-240-LLPX LMR -240-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs UL/NEC/CSA rated CMP/FT6 (listed under UL file #E ) Any wireless application (e.g. LMDS, MMDS, WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Cellular, PCS, Paging) requiring an easily routed, low loss RF cable for in-building systems Part Description Part No. Application Jacket Color Code LMR-240-LLPX Indoor/Outdoor Plenum Fluoropolymer Red CMP/FT6 Environmental Specifications 0 o Performance Property F C Installation Temperature Range -40/ /+125 Storage Temperature Range -40/ /+125 Operating Temperature Range -40/ /+125 Construction Specifications Description Material In. (mm) Inner Conductor Solid Bare Copper (1.30) Dielectric Low density PTFE (3.81) Outer Conductor Aluminum Tape (3.94) Overall Braid Tinned Copper (4.52) Jacket Red Fluoropolymer (5.43) Mechanical Specifications Bend Radius: installation in. (mm) 0.75 (19.1) Bend Radius: repeated in. (mm) 2.5 (63.5) Bending Moment ft-lb (N-m) 0.25 (0.34) Weight lb/ft (kg/m).040 (0.06) Tensile Strength lb (kg) 60 (27.22) Flat Plate Crush lb/in. (kg/mm) 85 (1.52) Electrical Specifications Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay ns/ft (ns/m) 1.34 (4.40) Impedance ohms 50 Capacitance pf/ft (pf/m) 26.7 (87.6) Inductance uh/ft (uh/m) (0.22) Shielding Effectiveness db >90 DC Resistance Inner Conductor ohms/1000ft (/km) 4.0 (13.1) Outer Conductor ohms/1000ft (/km) 3.9 (12.8) Voltage Withstand Volts DC 1500 Jacket Spark Volts RMS 5000 Peak Power kw (800) TMS-COAX
7 LMR-240-LLPX Attenuation vs. Frequency (typical) Attenuation (db per 100 feet) ,000 Frequency (MHz) Frequency (MHz) Attenuation db/100 ft , Attenuation db/100 m 4.5 5, Avg. Power kw Calculate Attenuation = ( ) FMHz + ( ) FMHz (interactive calculator available at Attenuation: VSWR=1.0; Ambient = +25 C (77 F) Power: VSWR=1.0; Ambient = +40 C; Jacket = +75 C (167 F); Sea Level; dry air; atmospheric pressure; no solar loading (800) TMS-COAX 81
8 LMR-240-LLPX LMR -240-LLPX Flexible Low Loss Plenum Coax TC-240-BMC TC-240-MUHF TC-240-NF-BH-X TC-240-NM TC-240-SM-RA-SS-X TC-240-NMC TC-240-SF-SS-BH-X TC-240-SM-SS-X TC-240-SM-RP EZ-240-SM-PL-X TC-240-TM-X TC-240-NMH-RA-D Connectors Inner Outer Finish* Part VSWR ** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g) 1. BNC Male Straight Plug TC-240-BMC <1.25:1 (2.5) Knurl Solder Clamp S/G 1.7 (43) 0.56 (14.2) (18.1) 2. Mini-UHF Straight Plug TC-240-MUHF <1.25:1 (2.5) Knurl Solder Crimp N/G 1.1 (28) 0.45 (11.4) (6.4)) 3. N. Female Bulkhead Jack TC-240-NF-BH-X <1.25 (2.5) NA Solder Crimp A/G 1.7 (44) 0.88 (22.2) (52.2) 4. N Male Straight Plug TC-240-NM <1.25:1 (2.5) Hex Solder Crimp N/S 1.5 (38) 0.75 (19.1) (39.0) 5. N Male Straight Plug TC-240-NMC <1.25:1 (2.5) Knurl Solder Clamp S/G 1.5 (38) 0.75 (19.1) (37.2) 6. SMA Female Bulkhead Jack TC-240-SF-SS-BH-X <1.25:1 (2.5) NA Solder Crimp SS/G 1.1 (29) 0.31 (7.9) (8.6) 7. SMA Male Straight Plug TC-240-SM-SS-X <1.25:1 (10) Hex Solder Crimp SS/G 1.0 (25) 0.32 (8.1) (7.3) 8. SMA Male Right Angle TC-240-SM-RA-SS-X <1.35:1 (6) Hex Solder Crimp SS/G 0.8 (20) 0.65 (16.5) (8.6) 9. SMA Male Rev. Polarity TC-240-SM-RP <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25) 0.32 (8.1) (7.3) 10. SMA Male Straight Plug EZ-240-SM-PL-X <1.25:1 (6) Hex Spring Finger Crimp A/G 1.0 (25.4) 0.32 (8.1) PL) 11. TNC Male Straight Plug TC-240-TM-X <1.25:1 (2.5) Knurl Solder Crimp N/S 1.7 (43) 0.59 (15.0) ) 12. N Male Right Angle TC-240-NMH-RA-D <1.35:1 (6) Hex/Knurl Solder Crimp A/G 1.2 (32.4) 1.22 (31.0) (41.7) * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair 82 (800) TMS-COAX
9 GK-S240TT Hardware Accessories Part Type Number Code Description Ground Kit GK-S240TT GK-S240TT Standard Ground Kit (each) LMR-240-LLPX CT-240/200/195/ CCT CST-240A RB-CST DBT-U WSB Install Tools Part Type Number Code Description Crimp Tool CT-240/200/195/ Crimp tool for LMR-100, 195, 200 and 240 connectors Strip Tool CST-240A Prep tool for LMR-240 connectors Deburr Tool DBT-U Removes center conductor rough edges Cutting Tool CCT Cable end flush cut tool Replacement Blade RB Replacement blade for cutting tool Replacement Blade Kit RB-CST Replacement kit for all CST strip tools Weather Seal Boots WSB Weather seal/strain relief boots (10 pk) for use with most popular LMR-240-X series connectors (800) TMS-COAX 83
10 LMR-300-LLPX LMR -300-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs UL/NEC/CSA rated CMP/FT6 (listed under UL file #E ) Any wireless application (e.g. LMDS, MMDS, WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Cellular, PCS, Paging) requiring an easily routed, low loss RF cable for in-building systems Part Description Part Number Application Jacket Color Code LMR-300-LLPX Indoor/Outdoor Plenum Fluoropolymer Red CMP/FT6 Environmental Specifications 0 o Performance Property F C Installation Temperature Range -40/ /+125 Storage Temperature Range -40/ /+125 Operating Temperature Range -40/ /+125 Construction Specifications Description Material In. (mm) Inner Conductor Solid Bare Copper (1.60) Dielectric Low density PTFE (4.83) Outer Conductor Aluminum Tape (4.98) Overall Braid Tinned Copper (5.72) Jacket Red Fluoropolymer (6.60) Mechanical Specifications Bend Radius: installation in. (mm) 0.88 (22.2) Bend Radius: repeated in. (mm) 3.0 (76.2) Bending Moment ft-lb (N-m) 0.38 (0.52) Weight lb/ft (kg/m).065 (0.10) Tensile Strength lb (kg) 120 (54.5) Flat Plate Crush lb/in. (kg/mm) 30 (0.54) Electrical Specifications Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay ns/ft (ns/m) 1.34 (4.40) Impedance ohms 50 Capacitance pf/ft (pf/m) 26.7 (87.6) Inductance uh/ft (uh/m) (0.22) Shielding Effectiveness db >90 DC Resistance Inner Conductor ohms/1000ft (/km) 2.61 (8.6) Outer Conductor ohms/1000ft (/km) 2.21 (7.3) Voltage Withstand Volts DC 2000 Jacket Spark Volts RMS 5000 Peak Power kw (800) TMS-COAX
11 Attenuation (db per 100 feet) Attenuation vs. Frequency (typical) Frequency (MHz) ,000 LMR-300-LLPX Frequency (MHz) Attenuation db/100 ft Attenuation db/100 m Avg. Power kw Calculate Attenuation = ( ) FMHz + ( ) FMHz (interactive calculator available at Attenuation: VSWR=1.0 ; Ambient = +25 C (77 F) Power: VSWR=1.0; Ambient = +40 C; Jacket = +75 C (167 F); Sea Level; dry air; atmospheric pressure; no solar loading TC-300-NMH-RA-D TC-300-SM TC-300-SF-BH TC-300-TM Connectors Inner Outer Finish* Part VSWR Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g) 1. SMA Male Straight Plug TC-300-SM <1.25:1 (2.5) Hex Solder Crimp SS/G 1.0 (25) 0.35 (8.9) (8.2) 2. SMA Female Bulkhead Jack TC-300-SF-BH <1.25:1 (2.5) NA Solder Crimp SS/G 1.1 (28) 0.31 (7.9) (10.0) 3. TNC Male Straight Plug TC-300-TM <1.25:1 (2.5) Knurl Solder Crimp N/S 1.7 (43) 0.59 (15.0) (22.7) 4. N Male Right Angle TC-300-NMH-RA-D <1.30:1 (2.5) Hex/Knurl Solder Crimp N/S 1.4 (35) 1.41 (35.8) (59.0) * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair GK-S300TT Hardware Accessories Type Part Number Code Description Ground Kit GK-S300TT GK-S300TT Standard Ground Kit (each) CST DBT-U Install Tools Type Part Number Code Description RB-CST Crimp Tool CT-400/ Crimp tool for LMR 300 connectors Deburr Tool DBT-U Removes center conductor rough edges Cutting Tool CCT Cable end flush cut tool Strip Tool CST Combination prep tool for LMR-300 Replacement Blade RB Replacement blade for cutting tool Replacement Blade Kit RB-CST Replacement blade kit for all strip tools CT-400/ CCT (800) TMS-COAX 85
12 LMR-400-LLPX LMR -400-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs UL/NEC/CSA rated CMP/FT6 (listed under UL file #E ) Any wireless application (e.g. LMDS, MMDS, WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Cellular, PCS, Paging) requiring an easily routed, low loss RF cable for in-building systems Part Description Part Number Application Jacket Color Code LMR-400-LLPX Indoor/Outdoor Plenum Fluoropolymer Red CMP/FT6 Environmental Specifications 0 o Performance Property F C Installation Temperature Range -40/ /+125 Storage Temperature Range -40/ /+125 Operating Temperature Range -40/ /+125 Construction Specifications Description Material In. (mm) Inner Conductor Solid BCCAI (2.41) Dielectric Low density PTFE (7.24) Outer Conductor Aluminum Tape (7.39) Overall Braid Tinned Copper (8.13) Jacket Red Fluoropolymer (9.40) Mechanical Specifications Bend Radius: installation in. (mm) 1.00 (25.4) Bend Radius: repeated in. (mm) 4.0 (101.6) Bending Moment ft-lb (N-m) 0.5 (0.68) Weight lb/ft (kg/m) (0.15) Tensile Strength lb (kg) 120 (54.5) Flat Plate Crush lb/in. (kg/mm) 185 (3.31) Electrical Specifications Velocity of Propagation % 76 Dielectric Constant NA 1.73 Time Delay ns/ft (ns/m) 1.34 (4.40) Impedance ohms 50 Capacitance pf/ft (pf/m) 26.7 (87.6) Inductance uh/ft (uh/m) (0.22) Shielding Effectiveness db >90 DC Resistance Inner Conductor ohms/1000ft (/km) 1.8 (5.9) Outer Conductor ohms/1000ft (/km) 1.65 (5.4) Voltage Withstand Volts DC 2500 Jacket Spark Volts RMS 8000 Peak Power kw (800) TMS-COAX
13 LMR-400-LLPX Attenuation vs. Frequency (typical) 10.0 Attenuation (db per 100 feet) ,000 10,000 Frequency (MHz) Frequency (MHz) Attenuation db/100 ft Attenuation db/100 m Avg. Power kw Calculate Attenuation = ( ) FMHz + ( ) FMHz (interactive calculator available at Attenuation: VSWR=1.0 ; Ambient = +25 C (77 F) Power: VSWR=1.0; Ambient = +40 C; Jacket = +75 C (167 F); Sea Level; dry air; atmospheric pressure; no solar loading (800) TMS-COAX 87
14 LMR-400-LLPX LMR -400-LLPX Flexible Low Loss Plenum Coax 1 2 TC-400-NF-PL EZ-400-NMH-PL-X TC-400-TM-RA-D TC-400-NMH-PL Connectors Inner Outer Finish* Part VSWR ** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g) 1. N Female Straight Jack TC-400-NF-PL <1.25:1 (2.5) NA Solder Crimp N/G 1.8 (45) 0.66 (16.8) (47.6) 2. N Male Straight Plug EZ-400-NMH-PL-X <1.25:1 (2.5) Hex/Knurl Spring Finger Crimp A/G 1.5 (38) 0.89 (22.6) (51.3) 3. N Male Straight Plug TC-400-NMH-PL <1.25:1 (2.5) Hex/Knurl Solder Crimp S/G 1.5 (38) 0.89 (22.6) (51.3) 4. TNC Male Right Angle TC-400-TM-RA-D <1.35:1 (6) Hex/Knurl Solder Crimp A/G 1.2 (30) 1.48 (37.6) (50.0) * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair GK-S400TT HG-400T WSB Hardware Accessories Part Type Number Code Description Ground Kit GK-S400TT GK-S400TT Standard Grounding Kit (each) Hoisting Grip HG-400T HG-400T Laced Type (each) Weather Seal Boots WSB Weather seal/strain relief boots (10pk) for use with most popular LMR-400-X series connectors 88 (800) TMS-COAX
15 CT-U Y CT-400/ LMR-400-LLPX CST DBT-U CCT RB-CST TK-400EZ GST Install Tools Part Type Number Code Description Crimp Tool CT-U Crimp Handle Crimp Dies Y " Hex Dies Crimp Tool CT-400/ Crimp tool for LMR 400 connectors Crimp Rings CR Crimp rings for TC/EZ-400 connectors (package of 10) Strip Tool CST Combination prep tool for LMR-400 crimp and clamp connectors Mid-Span Strip Tool GST For ground strap attachment Deburr Tool DBT-U Removes center conductor rough edges Cutting Tool CCT Cable end flush cut tool Replacement Blade RB Replacement blade for cutting tool Replacement Blade Kit RB-CST Replacement kit for all CST strip tools Tool Kit TK-400EZ Tool kit for LMR-400 crimp/clamp connectors (includes CCT-02, CST-400, CT-400/300, Tool Pouch) (800) TMS-COAX 89
N Male Connector Clamp/Solder Attachment for PE-C600, inch, LMR-600
N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 RF Connectors Technical Data Sheet Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
More informationFLEXIBLE LOW LOSS COMMUNICATIONS COAX
FLEXIBLE LOW LOSS COMMUNICATIONS COAX LMR -100A Drop In Replacement For RG-316 / RG-174 LMR-100A-PVC LMR-100A-PVC500-500' Spool LMR -195 Drop In Replacement For RG-58 / RG-142 LMR-195 LMR-195-500 - 500'
More informationPRODUCT NAME ORDER # PAGE # ANTENNAS
PRODUCT NAME ORDER # PAGE # ANTENNAS 890-960 Yagi Antenna UBR-Y9000 w/ lead 0580 450 Mhz Yagi Antenna UBR-Y4000 w/ lead 05803 806-960 & 70-990 MHz Dual Band Omni Antenna 09835 3 806-960 & 70-500 Yagi Multiband
More informationRP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
More informationRP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
More informationMulti-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
More informationFAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
More informationSMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
More informationDynaFlex series cable assemblies employ innovative designs and material technology to deliver optimized electrical and
REVISED DynaFlex_021516_final_no logos.qxp_layout 1 5/10/17 1:56 PM Page 1 See back cover to learn about R single path to optimal performance www.dynawave.com DynaFlex RF and microwave cable assemblies
More informationCABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationTable of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
More information75 OHM COAXIAL CABLE (RG6)
RG6 CABLE (RG6) Drop Cable RG6 UL listed as type CMG for indoor cables. RG-6. 18 AWG copper covered steel with nominal diameter of 0.040 inch (1.02mm). Gas injected foam polyolefin insulation. Nominal
More informationFEATURES. ~ Compression resistant low loss, low density dielectric. ~ Quadraform shielding. ~ Highly reliable soldered connections
TRUE BLUE Low Loss cable assemblies The Answer: An unmatched combination of low loss, durability, and value. The Question: What does Storm s True Blue line of cable assemblies provide? For more than 30
More informationDetailed Specifications & Technical Data
Description: 20 AWG stranded (7x28).038" tinned copper conductors, polyethylene insulation, Beldfoil (100% coverage) plus a tinned copper braid shield (55% coverage), sunlight-resistant PVC jacket. Physical
More informationSMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
More informationOutlets terminate all shielded and shielded cable constructions AWG ( mm) size conductors.
MAX 5e Shielded Modules The shielded MAX module is the cornerstone of our category 5e screened cabling systems. This product not only meets all TIA/EIA component specifications, but also exceeds ISO/IEC
More informationMCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
More informationAssembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
More informationBodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
More information... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
More informationMCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
More informationPHASE MASTER NOW IN 4 SIZES
NOW IN 4 SIZES PHASE MASTER Phase Stable ASSEMBLIES Are you a design or test engineer looking for cable assemblies that offer an unmatched combination of phase stability, low loss, and value? Then take
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationBLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
More informationSERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationInterface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
More informationSMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
More informationAssembly Instructions-C12 Amphenol Triax BNC, 180 Polarity
Assembly Instructions-C2 Amphenol Triax BNC, 80 Polarity Washer C Washer D Contact Inner Insulator E Inner Body F Inner Insulator G Body Nut Gasket Washer B Washer A (2 pcs. if needed) Teflon Washer 3-4774-3
More informationonlinecomponents.com
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
More informationTriax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
More informationPPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
More informationType N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
More informationBroadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
More informationMaxFlite high-performance 100 Base-T Ethernet cables
MaxFlite high-performance 100 Base-T Ethernet cables MaxFlite data cables are high-performance, highspeed 100 Base-T Ethernet cables designed for use in aircraft IFE (In-Flight Entertainment) systems.
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
More informationCoaxial Cable Attenuation Charts A compilation of some of the most common coaxial cable attenuations. Nominal attenuation of 30.
A compilation of some of the most common coaxial cable attenuations. Nominal attenuation of 30.5 metres (100ft) Cable Type 70-85 MHz 148-174 MHz 400-520 MHz 806-960 MHz 2.4-2.45 GHz 5.8-5.85 GHz RG178B/U
More informationAmphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
More information- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
More informationMCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
More informationProduct Descriptions
Product Descriptions Catalog Number Foil Standard Construction - 60% Braid (90% Braid also available) lbs/kft kg/km lbs/kft kg/km F1160BV tape, 60% braid, PVC 59 88 69 103 F1160BVV tape, 60% braid, PVC,
More informationDetailed Specifications & Technical Data
For more Information please call 1-800-Belden1 : 18 AWG stranded bare copper conductors, PP insulation, PVC jackets, no overall jacket, all cables are Beldfoil shielded, cable jackets are color coded by
More informationUNSHIELDED MULTI CONDUCTOR
PLTC 300 VOLT PVC Insulation 105 C, 300 Volts UNSHIELDED MULTI CONDUCTOR For use as instrumentation cable inside or outside in control applications. Suitable for installation in trays, troughs, channels,
More informationWide band isolators (Peripheral Mode) 1-3 // // 2-6 // // 2-18 // //4-12// 4-20// 6-21// 8-18
SMA/N/ K Connector options (X) Isolator Port 1 Port 2 Female Male -1 Male Female -2 Female Female -3 Male Male -4 Tolerance Table Metric (inch) (unless otherwise stated): Hole diameter +/- 0.1mm, (+/-
More informationSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
More informationDetailed Specifications & Technical Data
For more Information please call 1-800-Belden1 : 18 AWG stranded bare copper conductors, Flamarrest insulation and jackets, no overall jacket, all cables are Beldfoil shielded, cable jackets are color
More informationRMP SERIES INFORMATION GUIDE
RMP SERIES INFORMATION GUIDE DESCRIPTION & DESIGN FEATURES Applications RMP series connectors can be used wherever high amperage connection of AC or DC power is required. Typical applications are the connection
More informationOur Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
More informationRG6 TLC F Hands-On. Materials Needed RG6 regular/dual coax cable Adjustable prep tool (stripper) (45-526) RG6 F TLC connector (85-168)
RG6 TLC F Hands-On Materials Needed RG6 regular/dual coax cable Adjustable prep tool (stripper) (45-526) RG6 F TLC connector (85-168) Prep the RG6 Tool directions Verify grey cartridge is in the front
More informationK CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationTools & Supplies. Phillips. Combo Head. Slotted. Square. Double Ended Customer Assistance
Tools & Supplies Combo Head Patented design tip fits most combination screws Phillips All bits 100% Made in the U.S.A.! Industrial Bits B-46 Slotted Combo Drive #2, 1 in. Insert Bit (Carded) 78-0105 Combo
More informationFISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationUltra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
More informationCannon 50 Ohm RF Connectors. Electronic Components
Cannon 50 Ohm RF Connectors Electronic Components Over 90 year history... ITT Electronic Components is an innovative and dynamic company with the in-depth experience of a 90 plus year industry leader.
More informationCABLED TWISTED PAIRS CONDUCTORS
CABLED TWISTED PAIRS CONDUCTORS NQP SERIES Twisted Pair uctors Mil Spec, U.L. AWM Recognized Style 2464 and CSA Certified AWM II A/B GRAY PVC JACKET National Wire & Cable Corporation manufactures a complete
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationTender No. : Ref. No. : LSGS-13-CX User / Customer : Page No. : 1 of 9. Specification. For
Tender No. : Ref. No. : LSGS-13-CX0022-05 User / Customer : Page No. : 1 of 9 Tender Title : Bidder : LS Cable & System Ltd. Document Title : Specification For RG Cable
More informationOctoPort Multi-Band Antenna
DATA SHEET Six foot (1.8 m), eight port antenna with an 45 azimuth beamwidth covering 698-787 MHz, 824-896 MHz and 1695-2180 MHz Four high band and four low band ports in a single antenna Sharp elevation
More informationSERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationConnectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
More informationCABLED SINGLE CONDUCTORS
CABLED SINGLE CONDUCTORS NQ SERIES Single uctors Mil Spec, U.L. AWM Recognized Style 2464 and CSA Certified AWM II A/B GRAY PVC JACKET National Wire & Cable Corporation manufactures a complete line of
More informationAssembly Instruction EL OCHITO WHITE CONTACTS 1000BASE-T/10GBASE-T TYPE I: PIN /SKT CABLE: S/FTP
AI85112-02 Assembly Instruction EL OCHITO WHITE CONTACTS 1000BASE-T/10GBASE-T TYPE I: PIN 858-003-02/SKT 858-032-02 CABLE: 963-033-26 S/FTP Revision History Rev Date Initiated By Approved 1 07/05/18 WLL
More informationLANmark-1000 Category 6 Plenum
LANmark-1000 is an ANSI/TIA/EIA Category 6 verified cable that is ideal for gigabit network applications. It introduces new electrical performance parameters which are needed for gigabit Ethernet network
More informationEthernet 100 Mbps Quadrax
Ethernet 100 Mbps Quadrax Quadrax Contact Today s technology for Airbone and Military equipment is more and more complex, requiring the management of an increasing flow of information at greater speeds.
More informationCheminax RF Coaxial Cables and RF Connectors
Cheminax RF Coaxial Cables and RF Connectors QUICK REFERENCE GUIDE Convenient Lightweight, small diameter Extended temperature range High Performance High flexibility Low capacitance Low attenuation HIGHER
More informationCABLE MANAGEMENT. Call Connectronics (888) / / OUR RESOURCES ARE YOUR SOLUTION. Stackable Snap-In Hanger Kits
Universal Snap-In Hangers CABLE MANAGEMENT Stackable Snap-In Hanger Kits for 1/2 cable and LMR-600, 10-pack 82-2803 for 5/8 cable, 10-pack 82-2804 for 7/8 cable, 10-pack 82-2805 for EW52 Waveguide, 10-pack
More informationAssembly Instruction. EL OCHITO BLUE CONTACTS SuperSpeed USB TYPE I: PIN /SKT CABLE:
AI85114-02 Assembly Instruction EL OCHITO BLUE CONTACTS SuperSpeed USB TYPE I: PIN 858-028-01/SKT 858-029-01 CABLE: 963-118 Revision History Rev Date Initiated By Approved 1 07/16/18 WLL GH 1.0 Tools Tools
More informationMulti-band Bi-SectorTM Array
DATA SHEET Patented twin asymmetric beam 33 Bi-Sector array phase array over a frequency range of (698-896 MHz) and (1710-2360 MHz), optimized to match existing cloverleaf (65 ) deployments. 4 low band
More information2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
More informationC Power Connection Kit
1548-4000C Power Connection Kit For use with Dekoron 2700 Family of Heating Cables Installation Instructions Kit Description The Dekoron 1548-4000C electrical connection kit distirbuted by Heat-Line is
More informationHexPort Multi-Band Antenna
DATA SHEET Four foot (1.2 m), six port antenna with a 65 azimuth beamwidth covering 698-894 MHz and 1710-2360 MHz Four high band and two low band ports including the WCS band in a single antenna Sharp
More information2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationCoaxial SMA MaleTerminations
Coaxial SMA MaleTerminations _ MECHANICAL SPECIFICATIONS Stainless Steel, Passivated.. high power Coaxial SMA Male terminations product selection chart P/N Power Avg. Peak Power Length Width CSM-1 1 W
More informationTooling CONTENTS PAGE
CONTENTS PAGE Joule effect soldering devices... 3 Stripping tools...4-6 Pointer gauges... 7 Soldering & assembly tools...8-10 Installation tools...11-12 Tool kits for semi-rigid and flexible cables...13-22
More informationComtran Cable. Commercial Premise & Specialty Datacom Products. Cat 5e - Cat 6A. LSZH & Industrial Ethernet. Indoor/Outdoor & Outside Plant
Comtran Cable Commercial Premise & Specialty Datacom Products Cat 5e - Cat 6A LSZH & Industrial Ethernet Indoor/Outdoor & Outside Plant Category 6 Commercial Premise Plenum: UL Type CMP Riser: UL Type
More informationHigh Power Directional Coupler
DATA SHEET High power coupler at 500 W across a wideband from 698 to 2700 MHz Low RF Insertion Loss and excellent return loss performance Outdoor unit with a wide range of coupling values from 6 to 20
More informationFi b e r Op t i c So l u t i o n s
Fi b e r Op t i c So l u t i o n s Maximize Your Efficiency and Profitability Bulk Fiber Durable Fiber Bulk Fiber Connectors Field Termination Kits Molded & Custom Fiber Assemblies Electronics Using Fiber
More informationINSTRUMENTATION CABLE
APPLICATION Used in data processing and process control. Suitable for fixed installations in damp locations and open spaces. The electrostatic screen protects against outer interference fields. Design
More informationEasier! Faster! Safer!
Gexol CIR Crush and Impact Resistant Without External Armoring Passes the same stringent crush and impact testing required by UL 2225 for Type MC-HL Index CIR Power Cables Three & Four Conductor + Ground...
More informationProfessionals Trust Pomona Performance
Professionals Trust Pomona Performance Test and Measurement Calibration RF Audio / Video / Broadcast Automotive Telecom 2008-2009 RoHS Table of Contents 2 3 New Products 5 Customized Products 6 Coaxial
More informationU/FTP vs F/UTP CAT6A LAN Cables June 2016
U/FTP vs F/UTP CAT6A LAN Cables June 2016 Preface Shielded cabling systems are strongly recommended for category 6A (Class EA) installations, but the user still has to choose between two optional shielding
More informationNew-Tronics Ltd. Beyond Your Expectations. CB, SCANNER ANTENNAS and Accessories CATALOG
New-Tronics Ltd. Beyond Your Expectations CB, SCANNER ANTENNAS and Accessories CATALOG TOLL FREE ORDER LINE: (877) 994-9499 (940) 325-1386 FAX (940) 328-1409 www.new-tronics.com email: sales@new-tronics.com
More informationPERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
More informationA full spectrum of custom cables
A full spectrum of custom cables A full spectrum of custom cables Wilcoxon builds cables to your specifications and our exacting standards Industrial process Predictive maintenance Condition based monitoring
More informationCoaxial N MaleTerminations
Coaxial N MaleTerminations _ MECHANICAL SPECIFICATIONS Brass, Nickel Plated.. high power coaxial N Male Terminations product selection chart P/N Power Avg. Power Peak Length Width CFT-2 NM 2 W 1.5 KW.
More informationRF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
More informationsmpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
More informationGeneral Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
More informationDirectory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationBNC and MHV SHV-5 and SHV-10 SHV-20 and SHV-B
Coaxial is the description for electrical feedthroughs with parallel and concentric conductor paths, and with the inner most conductor path electrically isolated from the vacuum flange. Grounded Shield
More informationCam-Lok Single Pole Connectors
Cam-Lok Single Pole Connectors Cooper Interconnect Cam-Lok Single Pole Connectors are specially designed to provide the ultimate in reliable service, even under the most severe operating conditions. These
More informationCorflex. Continuous Corrugated Aluminum Sheathed PL, MC and MV Industrial Cables. Introduction Applications... 3
Corflex Continuous Corrugated Aluminum Sheathed PL, MC and MV Industrial Cables Introduction................................. 2 Applications................................. 3 Corflex PL 300V Instrumentation
More information75 Ω BNC Style Connector
7 Ω BNC Style Connector Frequency Range Characteristic Impedance 7 Ω FETURE 7 Ω of BNC style connector BNC style connectors can be mated. Bayonet coupling mechanism for reliable connection. ock Type Bayonet
More information