Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series

Size: px

Start display at page:

Download "Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series"

Ambrose Walters
5 years ago
Views:

MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized

1 MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable Sets are designed as flexible alternative to inch semirigid types. M F02 have similar electrical and RF performance as semirigid but WITHOUT the routing problems of semirgid types. M F02 cable sets are highly flexible and can be easily routed inside racks, rackrack or inside LRU s. Designed for use upto 18 with rugged cableconnector joints. FLEXIBLE SUBSTITUTE TO SEMIRIGID M F02 cable sets are flexible alternatives to semirigid cables. RF and electrical parameters like loss, power handling of M F02 types are same as inch semirigid types, but MF02 cable sets are flexible as compared to semirigid which are quite rigid. M F02 types overcome the routing problems of semirigid due to their flexibility. Compared to semirigid types there is no need for hand or machine bending Attenuation & Power Handling Data Frequency Insertion Loss db/ft db/m Power (watts) 100 MHz MHz CONFORMANT MIL STANDARDS Cable conforms to MILC17 Connectors conform to MILPRF39012 APPLICATIONS Military and defense systems interconnect General purpose test applications R&D labs Environmental and test chambers Physical & Mechanical Specifications Dimensions inches mm Center Conductor Jacket Bend Radius (min) Weight Temperature Range Impedance Electrical Specifications 50 ohms Velocity of Propagation 70 % Shielding Effectiveness Capacitance Operating Frequency Phase Stability with Flex Amplitude Stability* (db/m@18) (lb/ft) better than 100 db 29.9 pf/ft Kg/m 55 C ~ +125 C < ± 0.05dB * Phase & amplitude stability test method: wrap cable 360º around a mandrel whose radius is 10 times the cable diameter 35

upto 18 use S11 Plot of MF02 Preconnectorized cable set with SMA(M) on both sides

2 reliable performance, dependable service MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use S11 Plot of MF02 Preconnectorized cable set with SMA(M) on both sides Return Loss S 21 Plot of MF02 Preconnectorized cable set with SMA(M) on both sides 36

3 MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service M F02 Cable Construction Center conductor: Solid silver plated copper Inner shield is spiral wrapped silver plated copper flat ribbon tape Tough, high temp. FEP Jacket Dielectric : Solid PTFE Outer Shield: Silver plated copper braid Connectors Specifications Specifications SMA Connectors N Connectors TNC Connectors Outer Conductor Brass Gold plated Copper alloy Copper Alloy Center Conductor Brass, Gold Plated Brass, Gold Plated Brass, Gold Plated Insulation PTFE PTFE PTFE Gasket Silicon Rubber Silicon Rubber Silicon Rubber Frequency range DC~18 DC~11 DC~11 Nominal Impedance Mating/Unmating 500 operations 500 operations 500 operations Vibration As per MILSTD202, method 204, test condition D Mechanical Shock As per MILSTD202, method 213, test condition I Thermal Shock As per MILSTD202, method 107, test condition B Humidity As per MILSTD202, method 106 Temperature Cycle As per MILSTD202, method 102A, test condition C Ordering Codes Description (Length) (Connector 1) (Connector 2) MF02 ( / ) ( / ) L L U L L Length 0.5 = 0.5 ; 1 = 1.0 ; 2 = Connector Series SMA = SMA ; N = N ; BNC = BNC; TNC = TNC 2 Male/Female Designator M = Male ; F = Female 3 Orientation of Connector ST = Straight ; RA = Right Angle U Unit of Length M = Meter ; F = Feet ; I = Inch 1 meter cable set with SMA (Male) on both sides = MF021.0SMA(M/ST)SMA(M/ST)M 37

4 reliable performance, dependable service MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use Cable Set Ordering Codes Ordering Code Length 1.5 MF020.5SMA(M/ST)SMA(M/ST)M MF021.0SMA(M/ST)SMA(M/ST)M MF022.0SMA(M/ST)SMA(M/ST)M MF023.0SMA(M/ST)SMA(M/ST)M MF025.0SMA(M/ST)SMA(M/ST)M MF021.0SMA(M/ST)SMA(M/ST)F MF022.0SMA(M/ST)SMA(M/ST)F MF020.5SMA(M/ST)SMA(M/RA)M MF021.0SMA(M/ST)SMA(M/RA)M MF022.0SMA(M/ST)SMA(M/RA)M MF023.0SMA(M/ST)SMA(M/RA)M MF025.0SMA(M/ST)SMA(M/RA)M MF021.0SMA(M/ST)SMA(M/RA)F MF022.0SMA(M/ST)SMA(M/RA)F MF020.5SMA(M/RA)SMA(M/RA)M MF021SMA(M/RA)SMA(M/RA)M MF022SMA(M/RA)SMA(M/RA)M MF023SMA(M/RA)SMA(M/RA)M MF025SMA(M/RA)SMA(M/RA)M MF021SMA(M/RA)SMA(M/RA)F MF022SMA(M/RA)SMA(M/RA)F MF020.5N(M/ST)N(M/ST)M MF021.0N(M/ST)N(M/ST)M MF022.0N(M/ST)N(M/ST)M MF023.0N(M/ST)N(M/ST)M MF025.0N(M/ST)N(M/ST)M MF021.0N(M/ST)N(M/ST)F MF022.0N(M/ST)N(M/ST)F 3 SMA (Male) Straight SMA (Male) Straight Insertion Loss (db) Typical 6 SMA (Male) Straight SMA (Male) Right Angle SMA(Male) Right Angle SMA(Male) Right Angle N (Male) Straight N (Male) Straight

5 MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service Cable Set Ordering Codes Ordering Code Length 1.5 MF020.5SMA(M/ST)N(M/ST)M MF021.0SMA(M/ST)N(M/ST)M MF022.0SMA(M/ST)N(M/ST)M MF023.0SMA(M/ST)N(M/ST)M SMA (Male) Straight N (Male) Straight Insertion Loss (db) Typical TNC (Male) Straight TNC (Male) Straight MF020.5TNC(M/ST)TNC(M/ST)M MF021.0TNC(M/ST)TNC(M/ST)M MF022.0TNC(M/ST)TNC(M/ST)M MF023.0TNC(M/ST)TNC(M/ST)M MF025.0TNC(M/ST)TNC(M/ST)M MF021.0TNC(M/ST)TNC(M/ST)F MF022.0TNC(M/ST)TNC(M/ST)F SMA (Male) Straight Quick Lock (Male) Straight MF020.5SMA(M/ST)QL(M/ST)M MF021.0SMA(M/ST)QL(M/ST)M MF025.0SMA(M/ST)QL(M/ST)M MF021.0SMA(M/ST)QL(M/ST)F MF022.0SMA(M/ST)QL(M/ST)F SMA (Male) Straight TNC (Male) Straight MF020.5SMA(M/ST)TNC(M/ST)M MF021.0SMA(M/ST)TNC(M/ST)M MF025.0SMA(M/ST)TNC(M/ST)M MF021.0SMA(M/ST)TNC(M/ST)M MF022.0SMA(M/ST)TNC(M/ST)M N (Male) Straight TNC (Male) Straight MF020.5N(M/ST)TNC(M/ST)M MF021.0N(M/ST)TNC(M/ST)M MF025.0N(M/ST)TNC(M/ST)M MF021.0N(M/ST)TNC(M/ST)M MF022.0N(M/ST)TNC(M/ST)M

6 Specifications for MIL Use SemiFlexible Low Loss RF Cable Sets Length Connector 1 Connector 2 Should be flexible, easily routable Cable should conform to MIL standards MILC17 and connectors to MILPRF39012 Cable Electrical Specifications Impedance: 50 ohms Frequency: DC~18 Velocity of Propagation: 70 % Shielding Effectiveness: better than 100 db Power Handling: > 145 Watts > 100 Watts > 45 Watts Insertion Loss : < 0.24 < 0.46 < 0.67 VSWR : < 1.3 (DC ~ 11 Ghz) for SMA straight connector < 1.4 (11~18 ) for SMA straight connector < 1.35 (DC~7 ) for SMA right angle connector Cable Physical & Mechanical Specifications Construction should be double shielded for low loss Inner Conductor: Solid Silver Covered Copper Dielectric: PTFE Inner Shield: Silver Plated Copper Flat Ribbon Tape Outer Shield: SilverPlated Copper Braid Jacket: Rugged Fluorinated Ethylene Propylene (FEP) suitable for harsh environment Overall diameter: < 4.15 mm Bending Radius: < 12 mm Temperature Range: 55 C ~ +125 C Connector Specifications (SMA) Outer Conductor: Stainless Steel/Brass, Gold plated Center Conductor: Brass, Gold Plated Insulation: PTFE Frequency range: DC~18 (for SMA straight) DC~7 for SMA right angle Should meet test conditions of MILSTD202 for vibration, mechanical shock, thermal shock, corrosion, humidity, temperature cycling Connector Specifications (N) Outer Conductor: Copper alloy Center Conductor: Brass, Gold Plated Insulation: PTFE Frequency range: DC~11 for N straight DC~4 for N right angle Should meet test conditions of MILSTD202 for vibration, mechanical shock, thermal shock, corrosion, humidity, temperature cycling Connector Specifications (TNC) Outer Conductor: Copper alloy Center Conductor: Brass, Gold Plated Insulation: PTFE Frequency range: DC~11 for TNC straight Should meet test conditions of MILSTD202 for vibration, mechanical shock, thermal shock, corrosion, humidity, temperature cycling

SMA Male Connector Solder Attachment for RG188-DS, RG316-DS

SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating