SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
|
|
|
- Nancy Hood
- 6 years ago
- Views:
Transcription
1 Section Index Connectors Specifications Flexible Cable Bulkhead PCB Mount Other Information Assembly Instructions Cable Assembly Cable Information Numerical Index Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by 60 Tel: u Fax: info@rfconnector.com
2 Specifications connectors are semi-precision, subminiature devices that provide repeatable electrical performance from DC to 4 GHz. The family of connectors provides a means of quick connect and disconnect through a snap-on type coupling. This makes them useful in areas that are inaccessible to normal mating action. They are best suited for use with cables in the range of.070" to.120" diameters, such as RG 178, RG 174 and RG 316. The plugs have female contacts while the jacks have male contacts. The series is similar in size to SMC connectors but is generally used at a lower frequency. LTI connectors are designed to conform to MIL-C specifications. Its smaller physical size and snap-on coupling make the an ideal general purpose connector where packaging density, ease of mating/unmating and economy are prerequisites. Typical applications for connectors are telecommunications, test equipment, instrumentation and GPS. PLUG Interface Mating Dimensions Letter Minimum Maximum A B C D E F G DIMENSIONS ARE IN MILLIMETERS Letter Minimum Maximum A B C D E F G H I J K L DIMENSIONS ARE IN MILLIMETERS NOTE 1: I.D. to meet VSWR and contact resistance when mated with.48/.53mm dia. pin. NOTE 2: Must meet the force to engage and disengage when mated with mating part. JACK 61
3 Specifications ELECTRICAL RATINGS Impedance 50 ohm Frequency Range DC to 4 GHz RG-174,188,316 RG-178,196 Dielectric Withstanding Voltage (at sea level, in V rms, 50 Hz) Working Voltage (at sea level, in V rms, 50 Hz) 335 max 250 max Insulation Resistance 1000 MΩ min RF Leakage -55 db 2.5 GHz Insertion Loss Straight Right Angle.3 db 1.5 GHz.6 db 1.5 GHz Contact Resistance Center Contact Outer Contact 5 mω max 1 mω max MECHANICAL RATINGS Mating Snap-on coupling Durability 500 matings max Coupling Nut Retention Force 36 lbs min Contact Captivation 4 lbs min Cable Retention RG-174, 188, 316 RG-178, lbs min 6 lbs min ENVIRONMENTAL RATINGS Temperature Range -65 C to C Thermal Shock MIL-STD-202, Method 1017, Condition A Vibration MIL-STD-202, Method 204, Condition D Corrosion MIL-STD-202, Method 101, Condition B Temperature Cycling MIL-STD-1344, Method 1003, Condition A MATERIALS Material Plating Connector Body Brass per QQ-B-626 Gold/Nickel Center Contact Male Brass per QQ-B-626 Gold Female Beryllium Copper per QQ-C-530 Gold Insulator Teflon None Gasket Silicone Rubber None Crimp Ferrule Annealed Copper per WW-T-799 Same as body Cable Type VSWR Frequency Range 1 GHz 3 GHz 4 GHz RG-55, 142, 223, RG RG-174, 188, RG-178, Semi-rigid RG-55,142, RG RG-174, 188, RG-178, Semi-rigid Semi-rigid Typical VSWR for SMC straight connectors Typical VSWR for SMC right angle connectors 62
4 Flexible Cable Straight Crimp Plug LTI-SBSM11GT-XXX RG-316,174,188;Q1,D316 A: 1.6 B: 2.35 LTI-SBSM11GT-XXX RG-178,196 A: 1.0 B: 1.7 LTI-7SBSM11GT-179 RG-179 (75 ohm) A: 1.6 B: 2.35 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-SBSM11NT- XXX) Page 172, Line 11 Straight Crimp Plug Cable Type LTI-SBSM11GT-XXX RG-58,141,142,223,400 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-SBSM11NT-XXX) available. Call for min order reqs. Page 172, Line 11 Right Angle Crimp Plug LTI-SBLM11GT- XXX RG-316,174,188;Q1,D316 A: 1.6 B: 2.35 LTI-SBLM11GT- XXX RG-178,196 A: 1.0 B: 1.7 LTI-7SBLM11GT-179 RG-179 (75 ohm) A: 1.6 B: 2.35 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-SBLM11NT-XXX) ASSEMBLY INST.: Page 177 Page 172, Line 12 Right Angle Crimp Plug Cable Type LTI-SBLM11GT-XXX RG-58,141,142,223,400 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-SBLM11NT- XXX) available. Call for min order reqs. ASSEMBLY INST.: Page 177 Page 172, Line 12 63
5 Flexible Cable/Semi-Rigid Cable Straight Crimp Jack LTI-SBSF11GT-XXX RG-316,174,188;Q1,D316 A: 1.6 B: 2.35 LTI-SBSF11GT-XXX RG-178,196 A: 1.0 B: 1.7 LTI-7SBSF11GT-179 RG-179 (75 ohm) A: 1.6 B: 2.35 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-SBSF11NT-XXX) Page 172, Line 11 Right Angle Crimp Jack LTI-SBLF11GT-XXX RG-316,174,188;Q1,D316 A: 1.6 B: 2.35 LTI-SBLF11GT-XXX RG-178,196 A: 1.0 B: 1.7 LTI-7SBLF11GT-179 RG-179 (75 ohm) A: 1.6 B: 2.35 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Nickel plated parts (LTI-SBLF11NT-XXX) ASSEMBLY INST.: Page 177 Page 172, Line 13 Straight Bulkhead Crimp Jack Cable Type M.H. Dimensions LTI-SBSF13RGT-XXX RG-316,174,188;Q1,D316 4 A: 1.6 B: 2.35 LTI-SBSF13RGT-XXX RG-178,196 4 A: 1.0 B: 1.7 LTI-7SBSF13RGT-179 RG-179 (75 ohm) 4 A: 1.6 B: 2.35 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See Part Numbering Chart on page 3 for more info. Nickel plated parts (LTI-SBSF13RNT-XXX) Page 172, Line 40 Solder Plug for Semi-Rigid Cable LTI-SBSM31GT-086 Semi-Rigid.086 A: 2.3 B: 3.2 LTI-SBSM31GT-141 Semi-Rigid.141 A: 3.65 B: 4.8 Nickel plated parts (LTI-SBSM31NT-XXX) MOUNTING HOLE (M.H.): Page 180 Page 173, Line 3 64
6 Semi-Rigid Cable/Bulkhead Right Angle Solder Plug for Semi-Rigid Cable LTI-SBLM31GT- 086 Semi-Rigid.086 A: 2.3 B: 3.2 LTI-SBLM31GT- 141 Semi-Rigid.141 A: 3.65 B: 4.8 Nickel plated parts (LTI-SBLM31NT-XXX) ASSEMBLY INST.: Page 181 Page 173, Line 4 SolderJack for Semi-Rigid Cable LTI-SBSF31GT-086 Semi-Rigid.086 A: 2.3 B: 3.2 LTI-SBSF31GT-141 Semi-Rigid.141 A: 3.65 B: 4.8 Nickel plated parts (LTI-SBSF31NT-XXX) ASSEMBLY INST.: Page 180 Page 173, Line 3 Bulkhead Solder Jack for Semi- Rigid Cable Cable Type M.H. Dimensions LTI-SBSF33RGT-086 Semi-Rigid A: 2.3 B: 3.2 LTI-SBSF33RGT-141 Semi-Rigid A: 3.65 B: 4.8 Nickel plated parts (LTI-SBSF33RNT- XXX) ASSEMBLY INST.: Page 180 Page 173, Line 3 Front Mount Bulkhead Jack with Solder Cup M.H. LTI-SBSF43GT 4 LTI-7SBSF43GT (75 ohm) 4 Nickel plated parts (LTI-SBSF43NT) 65
7 Bulkhead/PCB Mount Rear Mount Bulkhead Jack with Solder Cup M.H. LTI-SBSF43RGT 4 LTI-7SBSF43RGT (75 ohm) 4 Nickel plated parts (LTI-SBSF43RNT) Vertical PCB Thru Hole Plug M.H. LTI-SBSM54GT 23 LTI-7SBSM54GT (75 ohm) 23 Nickel plated parts (LTI-SBSM54NT) Right Angle PCB Thru Hole Plug M.H. LTI-SBLM54GT 23 LTI-7SBLM54GT (75 ohm) 23 Nickel plated parts (LTI-SBLM54NT) Vertical PCB Thru Hole Jack M.H. LTI-SBSF54GT 23 LTI-7SBSF54GT (75 ohm) 23 Nickel plated parts (LTI-SBSF54NT) 66
8 PCB Mount Right Angle PCB Thru Hole Jack M.H. LTI-SBLF54GT 23 LTI-7SBLF54GT (75 ohm) 23 Nickel plated parts (LTI-SBLF54NT) Right Angle Bulkhead PCB Thru Hole Jack M.H. LTI-SBLF543GT 23 LTI-7SBLF543GT (75 ohm) 23 Nickel plated parts (LTI-SBLF543NT) Edge Card Surface Mount Jack LTI-SBSF96GT LTI-7SBSF96GT (75 ohm) Nickel plated parts (LTI-SBSF96NT) available. Call for min order reqs. Right Angle Surface Mount Jack M.H. LTI-SBLF663GT 23 LTI-7SBLF663GT (75 ohm) 23 Nickel plated parts (LTI-SBLF663NT) 67
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
MCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
Interface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
Interface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
mcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
2.92mm connectors DIVIDER PAGE
connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A
2.4mm connectors 155
connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.
Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
Type N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
Amphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
SMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM
29 High Frequency Push-on Application Notes The connector, which is 30% smaller than its cousin, the, has similar features and applications. This is a multi-functional high frequency push-on connector
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001
Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
Broadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
Cannon 50 Ohm RF Connectors. Electronic Components
Cannon 50 Ohm RF Connectors Electronic Components Over 90 year history... ITT Electronic Components is an innovative and dynamic company with the in-depth experience of a 90 plus year industry leader.
PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
ArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
onlinecomponents.com
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
Triax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
BNC SERIES Miniature Coaxial Connectors
Miniature Coaxial Connectors Description favorite in the adaptation of a wide range of aerial rods, Jy Chyun s NC connectors feature an allencompassing antenna mount, backed by exceptional electrical characteristics,
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
R Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
Apr11 Rev A
Product Specification SMA In-Series Adapters 04Apr11 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) SMA In-Series Adapters.
800 Pin Receiver and ITA Modules and Contacts 2
TABLE OF CONTENTS 800 Pin Signal Module 800 Pin Receiver and ITA Modules and Contacts 2 Interface Devices (IDs) CASS Receiver 4 Light Weight CASS Receiver 5 80 Series Receiver 6 CASS Connector Module Configuration
Plug (male) Jack (female) Interface dimensions conformable to the standards: min. max. min. max. A B C D E H I
Plug (male) Plug Jack min. max. min. max. A B C D E H I Jack (female) Interface dimensions conformable to the standards: 279 Electrical data Requirements Mechanical data Requirements Environmental data
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
Amphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
PRODUCT SPECIFICATION
of 3 C Section : For the 200222, 2002323, 2002444, 20025, 200252, 200252, 20026, 200262, 200262, 20028, 200283, 200284, 2002822, 2002824, 200283, 2002832, 2002833, 2002834 and 2002835 series parts..0 GENERAL
Amphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
MMBX / MCX series R223 / R113 / R213
4 MMBX / MCX series R223 / R113 / R213 CONTENT Pages MMBX Introduction... 4-4 to 4-6 Interface... 4-7 Characteristics... 4-8 Plugs... 4-9 Receptacles... 4-9 to 4-10 Adapters... 4-11 emo board... 4-12
38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
N Series. N Type Connectors CONFORMING STANDARD SPECIFICATION MATERIAL/FINISH JIS-C-5411 MIL-C-39012
N Type Connectors N series is the most practical coaxial cable connectors for 7mm (inner diameter of outer conductor) of 50Ω group. High frequency performance is superior. Many types of connectors are
SP Series - Part Numbering
SP Series - Part Numbering Features Push-pull self latching technology Ultra precision High contact density High reliability / durability High vibration and outer force resistance Applications Telecommunications
1Rack and Panel Connectors
Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3
Connection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
Our Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
FISCHER ULTIMATE TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES
H CHAPTER PAGES FISCHER TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES IP68 to -0m / IP69 / Hermetic 60 EMC shielding High corrosion resistance 0,000 mating cycles H - FISCHER TM SERIES Table of contents
*HDMI-STYLE WEATHERTIGHT CONNECTORS *HDMI-STYLE WEATHERTIGHT CONNECTORS NPB C714
601 E WILDWOOD VILLA PARK, IL 60181 P: 630.834.7504 F: 630.834.8540 WWW.CONXALL.COM FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when panel connector is rear mounted and mated to the cable)
DATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
PHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
Assembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
D X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
HARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
RF Coaxial Connectors SMZ (Type 43)
SMZ (Type 43) Introduction The ITT Cannon range of SMZ connectors are extensively used in 75 communication systems and have become the recognised standard in telecommunications in many parts of the world.
MIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
for Quadrax and ELIO 8
1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467
Series 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
Amphenol Australia. ATM Series PRODUCT SHORTFORM. Amphenol Australia Pty Ltd. ATM Series
EX-STOCK AUSTRALIA ATM Series PRODUCT SHORTFORM Amphenol Australia Pty Ltd ATM Series ATM Series connectors are a high-performance, cost-effective solution specifically designed for smaller AWG applications,
9316 series Underwater applications Explosion proof Hermetically sealed
Branche Connecteurs Offshore 9316 series Underwater applications Explosion proof Hermetically sealed Summary 9316 1 Introduction 2 Presentation 3 Technical characteristics 4 Synopsis 5 Part-numbering system
MIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
HyperGrip - Push/Pull Plastic Circular Connectors
A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]
EN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
Ethernet 100 Mbps Quadrax
Ethernet 100 Mbps Quadrax Quadrax Contact Today s technology for Airbone and Military equipment is more and more complex, requiring the management of an increasing flow of information at greater speeds.
Electrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies
8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07
Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version
Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and
Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
Product Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
FISCHER CORE SERIES STAINLESS STEEL
TECHNICAL SPECIFICATIONS FISCHER CORE SERIES Fischer Connectors SA All rights reserved Web version 1.6-06.2017 Changes without prior notice FISCHER CORE SERIES FISCHER CORE SERIES KEY FEATURES The Fischer
CYLER. Catalogue. Cyler Technology Limited cylerconnectors. Push-Pull connectors
Push-Pull connectors Catalogue cylerconnectors Selection Guide Where and Why Push-Pull? Industrial and Automation Medical electronics Telecommunication Test and Measurement Quality aesthetics for more
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
APPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
Product Specification QSL RF Connectors
Product Specification QSL RF Connectors 108-2324 04Feb09 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Tyco Electronics QSL RF Connectors which
Integrated Backshell Fire Proof Connector
8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines
RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES
Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Connectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
Compact Low Profile Connectors with High Hermeticity Performance
EN2997 Hermetic Connectors Compact Low Profile Connectors with High Hermeticity Performance Adapted to sensor applications under high aeronautical constraints, such as engine & landing gear environments.
Connector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
75 Ω BNC Style Connector
7 Ω BNC Style Connector Frequency Range Characteristic Impedance 7 Ω FETURE 7 Ω of BNC style connector BNC style connectors can be mated. Bayonet coupling mechanism for reliable connection. ock Type Bayonet