MMBX / MCX series R223 / R113 / R213

Transcription

1 4 MMBX / MCX series R223 / R113 / R213

2

3 CONTENT Pages MMBX Introduction to 4-6 Interface Characteristics Plugs Receptacles to 4-10 Adapters emo board Panel drilling Receptacle packaging Assembly instructions MMBX/MCX MCX Introduction to 4-5 and 4-14 Interface Characteristics to 4-16 Plugs to 4-18 Jacks Receptacles to 4-20 In series adapters Panel drilling Packaging Assembly instructions

4 MMBX/MCX INTROUCTION BOAR TO BOAR OLUTION The Best ystems Radiall s engineers work with your engineers allowing us to develop the best competitively priced misalignment RF coaxial interconnect solutions on the market today. The Best Choices Radiall offers more board 2 board choices with four different product groups and ten connector series that can address the most demanding wireless telecom applications required for the new generation of infrastructure compact equipment. From base stations to repeaters and even handheld and GP devices, we have a tailored connector solution for you; including the new MP-MAX, MP-pring, IMP-pring and other large, limited and no misalignment solutions. MP-MAX Receptacle MP-MAX Get the best for less with the new MP-MAX large misalignment solution. Its patented impedance matching insulator is optimized for a larger operating gap between connectors making it easier for engineers to handle a board 2 board distance tolerance of at least.078 (2.0 mm) without a spring, which is 300% more than the standard MP! It features a 3 minimum tilt (radial travel) and it has an operating frequency range of C-6 GHz and a 1.2 max VWR guaranteed at C-3 GHz. MP-MAX Adapter pring-loaded Connectors Radiall s one connector IMP-pring and three connector MP-pring and MMBX- pring large misalignment spring-loaded series are the best for increased maximum distance tolerances. IMP-pring is a cost effective unique one connector solution that offers up to.023" (.6 mm) board 2 board distance tolerance with a tilt (radial travel) up to 4.5. The new MP-pring and MMBX-pring offer up to.078 (2 mm) board 2 board distance tolerance and a 4.5 tilt (radial travel). All spring-loaded solutions feature consistent VWR and low RF leakage. IMP-pring and MP-pring IMP Limited Misalignment Radiall s one connector IMP and three connector MP and MMBX limited misalignment series are designed for applications requiring relatively precise distance tolerance of up to.023" (.6 mm) with a tilt (radial travel) of up to 4.5. No Misalignment Radiall s MMT, MM and MCX series are designed for applications requiring little or no distance tolerance between boards. 4-4

5 Family eries INTROUCTION Misalignment tolerances imensions Performance Angle tolerance (example with a 10mm distance between boards Board to board distance tolerance Board to board minimum distance PCB surface / size Maximum frequency Typical VWR (min/max) at 3 GHz Power at 3 GHz at 25 C MMBX/MCX No misalignment MMT mm 4.2 X 4.9 / 25 mm 2 8 GHz 1,5 80W MM mm 4.2 X 5.1 / 21 mm 2 6 GHz 1,5 80W MCX mm 6 X 6 / 36 mm 2 6 GHz 1,25 120W Limited misalignment IMP mm 2 mm 4.5 X 4.5 / 20 mm 2 6 GHz 1,25 W MP 3.5 /0.3mm Max 0.5 mm 9.5 mm 5 X 5 / 25 mm GHz 1, W MMBX 4.5 /0.7mm Max 0.6 mm 6.7 mm 4 X 4 / 16 mm 2 6 GHz 1,15 1 W IMP-pring Not specified 1.2 mm 8.1 mm Ø 7 / 38 mm 2 18 GHz 1,2 1 W Large misalignment pring loaded IMP-pring 1 / 1 mm Max 2.0 mm 16 mm Ø 7 / 38 mm 2 6 GHz 1,15 1 W MP-pring 3.5 /0.3mm Max 1.2 mm 15.6 mm 5 X 5 / 25 mm GHz 1,15 1 W MMBX-pring 4.5 /0.7mm Max 1.6 mm 18 mm 6 X 6 / 36 mm 2 6 GHz 1,18 1 W Large misalignment cost effective MP-Max 3 /1mm Min 2.0 mm Min 13 mm 5.6 X 5.6 / 31 mm 2 6 GHz 1,2 300 W at 2.7 GHz 4-5

6 MMBX INTROUCTION Ω C GHz GENERAL nap-on mating Microminiature coaxial connectors Robust urface mount receptacles Fully compatible with automated pick and place machines APPLICATION Board to board applications Base station High density packaging The MMBX TM connector series is particularly suitable for board to board connection in new generation telecommunication systems. MMBX TM connectors allow a quick connection in a minimum space requirement. Frequency range is C to 12.4 GHz. MT connectors are totally compatible with pick and place machines. pace saving Its small space requirement is a main advantage for applications such as board to board connections as the height is only 7 mm. eries Range Receptacles and in-series adapters can be either sold separately or with the in-series adapter already inserted in the receptacle. In this case, assembly time will be reduced and you will be sure that the in-series adapter is properly inserted, as it has to be assembled perpendicularly to the receptacle. + eparately lide-on nap-on or lide-on Assembled Retention between receptacle and in-series adapter is ensured by the design of the adapter. - lide-on/nap-on: for board to board application, all in-series adapters remain on the same side during disconnection. - lide-on/lide-on In addition of PCB connectors and in-series adapters, Radiall offers you a wide range of products like straight plugs, right angle plugs and between-series adapters. 4-6

7 PLUG PCB connectors JACK INTERFACE MMBX Letter min. mm max. min. inch max. A 5.00 nom nom..197 nom..197 nom. B C E 1.85 nom nom..073 nom..073 nom. F 2.10 nom nom..083 nom..083 nom. G H I Letter min. mm max. min. inch max. K 0.75 nom nom..029 nom..029 nom. L 0 0 M N 2. nom. 2. nom..098 nom..098 nom. O 3.70 nom nom..146 nom..146 nom. P 0.95 nom nom..037 nom..037 nom. Q 1.85 nom nom..073 nom..073 nom. R 0. nom. 0. nom..020 nom..020 nom nom nom..004 nom..004 nom. lide-on In series adapters nap-on Letter mm inch T 3.70 nom..146 nom. U 0.95 nom..037 nom. V 0.70 nom..027 nom. Letter mm inch W 3.65 nom..144 nom. X 2.05 nom..080 nom. Z 0.80 nom..031 nom. 1 lotted and flared to meet electrical and mechanical requirements 2 imension to meet electrical and mechanical requirements 4-7

8 MMBX CHARACTERITIC Test/characteristics CECC Values/remarks ELECTRICAL CHARACTERITIC Impedance Frequency range Typical V..W.R. straight connectors: 2// 2.6// 2.6// right angle connectors: 2// 2.6// 2.6// Insulation resistance ielectric withstanding voltage (sea level) / Contact resistance center contact outer contact All dimensions are given in mm C - 1 GHz Ω C GHz GHz GΩ 0 Vrms. Hz 7 Vrms. Hz 5 mω 1 mω MECHANICAL CHARACTERITIC Mechanical endurance matings Engagement and separation force Engagement eparation N max 8-30 N Contact captivation N Cable retention force 2/ 2.6/ 58 N 110 N Vibration IEC Fc MIL-T-202, Method 204, condition A ENVIRONMENTAL CHARACTERITIC Temperature range -55 C C Thermal shock IEC Na MIL T 202, method 107G, condition B1 Moisture resistance IEC Ca MIL T 202, method 106F Corrosion IEC Ka MIL T 202, method 101, condition B Vibration IEC Fc MIL T 202, method 204, condition A MATERIAL Center & outer contacts Bodies Ferrules Insulators PLATING Center & outer contacts Bodies Ferrules Beryllium copper Brass Copper PTFE Gold/NPGR NPGR NPGR GHz tandard packaging = 100 pieces. 4-8

9 TRAIGHT PLUG (male center contact) PLUG AN PCB RECEPTACLE MMBX Fig. 1 Fig. 2 dia. Part number Fig. A Captive center contact Note RG178/RG196 2// R RG174/RG // R Crimp type 14.5 RG // R for flexible cables yes RG " R older type for semi-rigid cables RIGHT ANGLE PLUG (male center contact) A Fig. 1 Fig. 2 dia. Part number Fig. A Captive center contact Note RG178/RG196 2// R RG174/RG // R RG // R yes RG " R TRAIGHT PCB RECEPTACLE (male center contact) Crimp type for flexible cables older type for semi-rigid cables Fig. 1 Fig. 2 Part number Fig. Captive center contact PCB Assembly instructions Packaging Note R bulk 100 pieces M01 R yes tape & reel 720 pieces MT R P01 bulk 100 pieces To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information. 4-9

10 MMBX PCB RECEPTACLE EGE CAR PCB RECEPTACLE (female center contact) Fig. 1 Fig. 2 Part number Fig. Captive center contact Packaging Note R yes bulk 100 pieces MT edge card R TRAIGHT PCB RECEPTACLE (female center contact) Fig. 1 Fig. 2 Fig. 3 Part number Fig. Captive center contact PCB Assembly instructions Packaging Note R bulk 100 pieces M01 R yes tape & reel 720 pieces MT R P01 bulk 100 pieces R P01 bulk 100 pieces CREW-ON RECEPTACLE (female center contact) Part number Captive center contact Panel drilling R yes P To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information.

11 IN ERIE AAPTER (male-male center contact) AAPTER MMBX Part number Length A (mm) Nominal board to board R interface: snap-slide 6.7 R interface: slide-slide 9 Other length can be designed upon request: minimum board to board height is 6.7 mm. IN ERIE BULKHEA AAPTER (male-male center contact) Part number eries Panel drilling R MMBX male/mmbx male P02 BETWEEN-ERIE AAPTER Fig. 1 Fig. 2 Fig. 3 Fig. 4 Part number Fig. eries Packaging R MMBX male/ma male R MMBX male/ma female R MMBX female/ma male unit R MMBX female/ma female To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information. 4-11

12 MMBX Emo boards Part number R R Note 2 MT receptacles 2 MT receptacles with adapters PANEL RILLING P01 P02 P03 mm inch maxi mini maxi mini A B mm inch maxi mini maxi mini A Threading ØA M7 x 0.75 RECEPTACLE PACKAGING The tape is delivered on reels of 330 mm diameter A VIEW Part number R R Note including 7 receptacles 4-12 To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information.

13 M01 AEMBLY INTRUCTION Part number R R R R MMBX COPLANAR LINE Pattern and signal are on the same side. The material of PCB is epoxy resin (FR4) (Er = 4.6). The solder resist should be printed except for the land pattern on the PCB. APPLICATION 75Ω WITH B = 0.55 mm APPLICATION Ω WITH B = 1.2 mm PCB thickness (mm) Coplanar line A (mm) PCB thickness (mm) Coplanar line A (mm)

14 MCX INTROUCTION Ω - 75Ω C - 6 GHz INTerface GENERAL ubminiature coaxial connectors "Push-pull" snap-on mating Complies with specification CECC CEI standard APPLICATION Ω models Wireless communications Civil and military radio-telecommunication equipment 75Ω models Videocommunication Television broadcasting The MCX series utilizes the MB series electrical line and features a particularly simple, compact and robust interface. The MCX series is 30 % smaller than the MB. The MCX series helps to miniaturize equipment. It lowers wiring connection costs through its full crimp and solder crimp versions as the centre contact of the straight models can be either crimped or soldered. It optimizes PCB layouts with its range of models for PCBs including surface mount and press-fit receptacles. PLUG JACK 4-14 ITEM mm inch min. max. min max A B 3.05 nom..120 nom. C E F G H J ITEM mm inch min. max. min. max a ß A B C F G 3.05 nom nom. H

15 CHARACTERITIC MCX Test/characteristics ELECTRICAL CHARACTERITIC Impedance Frequency range Typical V..W.R. straight styles: // right angle styles: // Insulation resistance Contact resistance (mω) center contact outer contact Voltage rating (V.R.M.R.) Cable RG 196/U - RG 188A/U -.047" 2.6 double screen RG 405/U ielectric withstanding voltage Cable RG 196/U - RG 188A/U -.047" 2.6 double screen RG 405/U Power 1 GHz Initial At sea level 170 V rms max 335 V rms max 2 V rms max At sea level 0 V rms max 7 V rms max 7 V rms max Values/remarks Ω and 75Ω C - 6 GHz 2.5 GHz MΩ 6 GHz After environment At Ft 45 V rms max 85 V rms max 65 V rms max At Ft 100 V rms max 100 V rms max 100 V rms max P = 120W at 1.8 GHz, T = 40 C at sea level, VWR = 1.1 for a straight plug MCX for 2.6// cable MECHANICAL CHARACTERITIC Mechanical endurance Engagement eparation force Cable retention force RG 196A/U RG 188A/U 2.6/ Ω double screen.047" RG 405/U-.085 Contact captivation 0 matings 14.2 lbs - 63 N max 1.8 Lbs - 8N 4.5 lbs 20 N 7.2 lbs - 32 N 11.9 lbs - 53 N 24.1 lbs N 9.7 lbs - 43 N 34.9 lbs N Axial force 2.25 Lbs 10 N ENVIRONMENTAL CHARACTERITIC Operating temperature -55 C +155 C Temperature cycling CECC paragraph Thermal shock CECC paragraph MIL T method 107 condition C High temperature test CECC paragraph MIL T method 108A condition Corrosion (salt spray) CECC paragraph MIL T method 101 condition B Vibration CECC paragraph MIL T method 204 condition MATERIAL AN PLATING Materials Platings Bodies and male contacts Brass Gold/BBR (bodies) Female center contacts Beryllium copper Gold Ferrules Brass Insulators PTFE All dimensions are given in mm. tandard packaging = 100 pieces. 4-15

16 ECO MCX CHARACTERITIC Test/characteristics ELECTRICAL CHARACTERITIC Impedance Frequency range Typical V..W.R. straight connectors right angle connectors Values/remarks Ω C - 6 GHz Mating cycles 100 Temperature range -40 C to +85 C MATERIAL Connector body Insulator Female center contact Male center contact Outer contact PLATING and packaging Body Center contact Outer contact Female Packaging/MOQ Brass PTFE Bronze/Beryllium copper Brass Brass Gold Gold Gold Nickel 100 pieces bulk/moq 1000 pieces 0 pieces reel/moq 1000 pieces unit packaging/moq 100 pieces 4-16

17 TRAIGHT PLUG, FULL CRIMP TYPE, FOR FLEXIBLE CABLE PLUG MCX imensions (mm) Captive center Part number Imp. (Ω) dia. A B C contact Finish RG178/RG196 2// R no Gold RG174/RG // R Gold R113A Gold ECO version R // R Gold yes R113A Gold ECO version RG /75/ R R /75/ R BBR TRAIGHT PLUG, OLER TYPE, FOR EMI-RIGI CABLE imensions (mm) Part number Imp. (Ω) dia. A B C.047" semi-rigid.047" R RG " R Captive center contact no Finish Gold RIGHT ANGLE PLUG, CRIMP TYPE, FOR FLEXIBLE CABLE (captive center contact) Fig. 1 Fig. 2 imensions (mm) Part number Fig. Imp. (Ω) Finish dia. A B C RG178/RG196 2// R Gold 8.6 R Gold RG174/RG // R113A Gold ECO version R Gold R // 3.25 R113A Gold ECO version RG /75/ R BBR R /75/ R To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information. 4-17

18 MCX PLUG AN JACK RIGHT ANGLE PLUG, OLER TYPE (captive center contact) imensions (mm) Part number Imp. (Ω) dia. A B C.047" semi-rigid.047" R RG " R RG178/RG174/RG405 2// - 2.6// -.085" R Finish Gold TRAIGHT JACK, FULL CRIMP TYPE, FOR FLEXIBLE CABLE Fig. 1 Fig. 2 imensions (mm) Captive center Part number Fig. Imp. (Ω) dia. A B contact RG178/RG196 2// R no 1 RG174/RG // R Panel drilling yes RG /75/ R P01 Finish Gold BBR (nap mount Panel thickness ) -0.1 TRAIGHT BULKHEA JACK, FULL CRIMP TYPE, FOR FLEXIBLE CABLE imensions (mm) Captive Part number Imp. (Ω) dia. A B C center contact RG178/RG196 2// R no 5 RG174/RG // R yes Panel drilling P02 Finish Gold 4-18 To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information.

19 RECEPTACLE MCX TRAIGHT FEMALE PANEL RECEPTACLE (captive center contact) Fig. 1 Fig. 2 Part number Fig. Imp. (Ω) imensions (mm) Panel A B drilling Finish Note R P03 BBR Press-in mount R P02 Gold Recessed front mount TRAIGHT MALE PCB RECEPTACLE (captive center contact) imensions (mm) Panel Part number Imp. (Ω) Finish A B C drilling R P05 Gold TRAIGHT FEMALE PCB RECEPTACLE (captive center contact) Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Part number Fig. Imp. (Ω) imensions (mm) Assembly Panel A B C instructions drilling Finish Note R MT/Edge-card R MT R M01 MT/reel 100 pieces R Gold MT/reel 0 pieces R113A MT/reel 0 pieces ECO version R R113A P pieces ECO version R BBR R P06 Gold pace saving on PCB R P05 Gold 75 R M01 Gold MT/reel 100 pieces To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information. 4-19

20 MCX RECEPTACLE AN IN ERIE AAPTER RIGHT ANGLE FEMALE PCB RECEPTACLE (captive center contact) Part number R R R113A R R Fig. Imp. (Ω) Fig. 1 Fig. 2 Fig. 3 Fig. 4 imensions (mm) Assembly Panel A B C E instructions drilling P04 M P05 R P06 Finish Gold BBR Note Press-fit PCB mount MT MT/reel 0 pieces pace saving pattern R M01 Gold MT/reel 100 pieces R P05 IN ERIE AAPTER (female - female) Part number Imp. (Ω) Finish R Gold 4-20 To download data sheets and assembly instructions, visit & enter the part number in the earch box. Bold part numbers represent products typically in stock & available for immediate shipment. ee page 8 and 9 for packaging information.

21 P01 P02 PANEL RILLING P03 MCX P04 P05 P06 P07 PACKAGING 4-21

22 MCX AEMBLY INTRUCTION M01 VIEO HAOW Part number R Part number R Part number a b c R R113A R R Ø R R113A Ø R Ø Part number R R R R113A R Part number R R R113A Vaccum nozzle dimensions MCX Ω MCX 75Ω COPLANAR LINE Pattern and signal are on the same side. Thickness of PCB:.063 (1.6 mm). The material of PCB is the epoxy resin of glass fabrics bacs (Er = 4.8). The solder resist should be printed 4-22

23 Company Profile AUTOMOTIVE AEROspace Cable designation Cable Group /Ω Imp. Ω Core type Cable dimensions mm (inch) Core Insulator creen RG 174 A/U RG 178 B/U RG 178 B/U RG 178 non m. RG 179 B/U RG 187 A/U RG 188 A/U RG 196 A/U RG 212 /U RG 213 /U RG 214 /U RG 215 RG 216 /U RG 217 /U RG 218 /U RG 223 /U RG 225 /U RG 303 /U RG 316 /U R 316 RG 393 RG / 2 / 2 / 2 / 2.6 / / / 2 / 8 / 10 / 11 / 10 / 11 / / 22 / 5 / 11 / 5 / 2.6 / 2.6 / 10 / 5 / / x x x x x x x x x x x x x x x x x (.019) 0.30 (.012) 0.30 (.012) 0.29 (.011) 0.30 (.012) 0.30 (.012) 0.51 (.020) 0.30 (.012) 1.41 (.056) 2.26 (.089) 2.25 (.089) 2.25 (.089) 1.21 (.048) 2.69 (.106) 4.95 (.195) 0.89 (.035) 2.38 (.094) 0.94 (.037) 0.53 (.021) 0.53 (.021) 2.39 (.094) 0.98 (.039) R 179 BT 3002 BT / / 75 5 / x x (.012) 0.31 (.012) 0.60 (.024) 1.52 (.060) 0.84 (.033) 0.84 (.033) 0.84 (.033) 1.60 (.063) 1.60 (.063) 1.52 (.060) 0.86 (.034) 4.70 (.185) 7.24 (.285) 7.24 (.285) 7.25 (.285) 7.24 (.285) 9.40 (.370) (.680) 2.95 (.116) 7.24 (.285) 2.95 (.116) 1.52 (.060) 1.52 (.060) 7.24 (.285) 2.95 (.116) Outer 2.79 (.110) 1.78 (.070) 1.83 (.072) 1.80 (.071) 2.54 (.010) 2.79 (.110) 2.79 (.110) 2.03 (.080) 8.43 (.331) (.406) (.425) (.405) (.425) (.545) (.870) 5.38 (.212) (.429) 4.32 (.170) 2.49 (.098) 2.80 (.110) 9.91 (.390) 4.95 (.195) EFENE INUTRIAL INTRUMENTATION MEICAL PACE TELECOM Radiall cable if applicable P/N Remark C C C C C C C C na C C na C C C C C na C C C C PVC jacket FEP jacket PVC jacket non magnetic / FEP jacket FEP jacket PTFE jacket PTFE jacket PTFE jacket C C C LOH jacket FEP jacket FEP jacket s.a. PointVirgule imply Your Best Connection. Technical information and sales contacts are available at : The Best End-to-End Interconnect olutions PVC jacket PVC jacket PVC jacket PVC jacket PVC jacket PVC jacket glass fiber jacket We offer an extensive range of solutions that supports the most demanding signal transmission applications. 4G wireless infrastructure, active array radars, IE s detection, electrical wiring in aircrafts, soldier tactical radios, in-vehicle communications networks, and magnetic resonance imaging systems are just a few of the complex applications that we support. RF coaxial connectors Multipin rectangular connectors Fiber optic connectors and transceivers Rack and panel connectors Coaxial and fiber optic cable assemblies and harnesses Antennas for tactical networks, aerospace High frequency microwave components and instrumentation Coaxial switches, including the smallest and most reliable PT relay. FEP jacket FEP jacket FEP jacket FEP jacket Flexible cable BT approved 3.07 (.121) 3.55 (.140) 5.1 (.200) India - Radiall India Pvt. Ltd. emi rigid cables MIL-C-17 standard RG 401 /U RG 401 alu RG 402 /U RG 402 tin RG 402 silver RG 402 alu RG 402 non m. RG 405 /U RG 405 tin RG 405 alu RG 405 non m..047".047" tin.2".2".141".141".141".141".141".085".085".085".085".047".047" 1.63 (.064) 1.63 (.064) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.51 (.020) 0.51 (.020) 0.51 (.020) 0.51 (.020) 0.29 (.011) 0.29 (.011) Hand-formable Hand-formable Hand-formable Hand-formable.085".141".141".141" 0.51 (.020) 0.92 (.036) 0.92 (.036) 0.92 (.036) 5.31 (.209) 5.31 (.209) 2.98 (.117) 2.98 (.117) 2.98 (.117) 2.98 (.117) 2.98 (.117) 1.68 (.066) 1.68 (.066) 1.68 (.066) 1.68 (.066) 0.94 (.037) 0.94 (.037) (.2) 6.35 (.2) 3.58 (.141) 3.58 (.141) 3.58 (.141) 3.58 (.141) 3.58 (.141) 2.20 (.087) 2.20 (.087) 2.20 (.087) 2.20 (.087) 1.19 (.047) 1.19 (.047) C copper tubing C tinned alu tubing C copper tubing C tinned copper tubing C silvered copper tubing C tinned alu tubing C non magnetic / copper tubing C copper tubing C tinned copper tubing C tinned alu tubing C non magnetic / copper tubing C copper tubing C tinned copper tubing 2.21 (.087) 3. (.138) 4.05 (.159) 4. (.177) C C C C Best Value-added ervices 1C004XE November Edition 1.6 (.063) 1.95 (.077) 2.5 (.098) Collaboration: We work closely with your engineers to understand your business, your technical needs, and your budgetary issues; Wide Product Range: We manage our product lines thru the entire lifecycle in order to offer you a wide selection of standard products at an affordable cost; Custom Products: We can tailor products to specific equipment and application needs; Global Presence: We re everywhere you need us, with worldwide sales, engineering support, R& in North America, Europe, and Asia, and manufacturing facilities strategically located in the United tates, Mexico, France, India, and China; Responsive upport and ervice: From the design stage, planning to post-installation support, we re with you at every step, whether you need sales support or engineering expertise; On-time elivery: We support your logistical needs so you get the products when and where you need them; Warranty: We proudly stand behind our products. Hand-formable cable 1.63 (.064) 2.95 (.116) 2.98 (.117) 2.98 (.117) tin soaked braid tin soaked braid FEP jacket LZH jacket Certifications and Environmental Corrugated cables (with helical or ringed/annular copper tube) Flexible Flexible Flexible Flexible Flexible uper flexible uper flexible uper flexible uper flexible 1/4" 1/2" 7/8" 1 1/4" 1 5/8" 1/4" 3/8" 1/2" 7/8" Note: = single braid. = dual braid. tube 2.38 (.094) 4.80 (.189) 9.13 (.359) 12.7 (.0) 17.3 (.681) 1.90 (.075) 2.60 (.102) 3.60 (.142) 9.04 (.356) 6.40 (.252) 11.6 (.457) 22.5 (.866) 32.5 (1.28) 43.5 (1.71) 4.70 (.185) 6.30 (.248) 8.70 (.343) (.930) (.343) (.644) 27.7 (1.091) 39.5 (1.55).5 (1.99) 7.40 (.291) 10.8 (.425) 13.2 (.520) (1.082) na C na na na C C C C Coaxial, rf & microwave ringed/annular tube ringed/annular tube ringed/annular tube ringed/annular tube ringed/annular tube helical tube helical tube helical tube helical tube Full Line Catalog Radiall is IO 9001: 2008 certified and dedicated to continuous improvement programs that have resulted in also being A9100, T16949 and IO certified. In addition, Radiall is committed to investing in its people, future technologies and the environment, such as being RoH (Restriction of Hazardous ubstances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemical substances) compliant. For more information about cables manufactured by Radiall, please consult our online catalog. Radiall is a global leader in the design, development and manufacturing of leading edge interconnect solutions. edicated to understanding its customers needs since 1952, Radiall has earned the reputation of being the best of the best in engineering ingenuity by providing a constant flow of creative system solutions serving the telecommunications, aerospace, defense, instrumentation, automotive, industrial, medical and broadcast markets. Coaxial, rf & microwave