Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold

MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22

Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...

SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66

Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical

MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21

Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug

SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43

Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC

mcx connectors DIVIDER PAGE

mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM

- (90 - f (GHz)) db (.05 SQT(f(GHz))) db

TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory

Type N connectors DIVIDER PAGE

Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110

Amphenol RF Interconnects

1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX

SERIES MHV (H4) HIGH VOLTAGE CONNECTORS

SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated

Interface Mating Dimensions

SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The

Interface Mating Dimensions

SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer

Table of Contents SMA CONNECTORS

Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End

2.92mm connectors DIVIDER PAGE

connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A

2.4mm connectors 155

connectors 155 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E.312 HEX. ØA ØD ØB ØC ØD ØC ØB ØA M7 x 0.75-6g MALE, FEMALE, male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM LTR.

SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS

SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of

smpm connectors DIVIDER PAGE

connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.

SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...

CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...

MCX SERIES. Description. Applications. Microminiature Coaxial Connectors

MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance

... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS

... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe

TNC Series Series C TN 114

TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315

BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ

BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom

SMC SERIES Subminiature Coaxial Connectors

SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement

SMA CONTENTS PAGE 9-3

CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15

SMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM

29 High Frequency Push-on Application Notes The connector, which is 30% smaller than its cousin, the, has similar features and applications. This is a multi-functional high frequency push-on connector

MicroMate (MMCX) Amphenol Specifications

Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid

PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG

INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),

Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229

SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8

Cannon 50 Ohm RF Connectors. Electronic Components

Cannon 50 Ohm RF Connectors Electronic Components Over 90 year history... ITT Electronic Components is an innovative and dynamic company with the in-depth experience of a 90 plus year industry leader.

MMC RTX series EN3716

MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products

Broadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm

Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications

Apr11 Rev A

Product Specification SMA In-Series Adapters 04Apr11 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) SMA In-Series Adapters.

RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002

Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations

Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)

Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on

RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196

RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification

1Rack and Panel Connectors

Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3

BNC SERIES Miniature Coaxial Connectors

Miniature Coaxial Connectors Description favorite in the adaptation of a wide range of aerial rods, Jy Chyun s NC connectors feature an allencompassing antenna mount, backed by exceptional electrical characteristics,

RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100

RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348

onlinecomponents.com

Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC

Triax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.

Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC

HyperGrip - Push/Pull Plastic Circular Connectors

A B C D E F G H J K HG2 HG3 HG4 Ø1.014 [25.76] 1.220 [30.98] Ø0.866 [22.00] 0.272 [6.91] 1.637 [41.59] 3.265 [82.93] Ø0.502 [12.75] Ø0.656 [16.66] 2.700 [68.56] 3.724 [94.60] Ø1.172 [29.77] 1.137 [28.87]

RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001

Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER

N Series. N Type Connectors CONFORMING STANDARD SPECIFICATION MATERIAL/FINISH JIS-C-5411 MIL-C-39012

N Type Connectors N series is the most practical coaxial cable connectors for 7mm (inner diameter of outer conductor) of 50Ω group. High frequency performance is superior. Many types of connectors are

SMA Male Connector Solder Attachment for RG188-DS, RG316-DS

SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating

ORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001

DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to

FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color

FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry

Amphenol 348 Series High Density Connectors

348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................

PRODUCT SPECIFICATION

MICRO-FIT BMI FLOATING CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector system terminated with 20 to 30 AWG wire using crimp technology

Ethernet 100 Mbps Quadrax

Ethernet 100 Mbps Quadrax Quadrax Contact Today s technology for Airbone and Military equipment is more and more complex, requiring the management of an increasing flow of information at greater speeds.

17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA

17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors

R Z18 Series : SMB CARLOCK

.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY

Series 80 Mighty Mouse Technical Reference Complete Product Specification

Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)

CMC Hybrid Connectors Standard and Power Versions

CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications

CMC Hybrid Connectors Standard and Power Versions

CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications

DATA-CON-X : SEALED USB TYPE A & B CONNECTORS

FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or

DETAIL SPECIFICATION SHEET

INCH-POUND MIL-DTL-24308/36 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL

RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES

Rev. C, March, 2016 RECTANGULAR CONNECTORS PER ARINC 404 RM-RME SERIES Connectors with wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification

D X X - XX - XX - X X

CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium

QUALIFICATION TEST SUMMARY REPORT ESR Qualification Type Testing of Amphenol Corporation s 2M801 Series Connector

Page 1 of 13 QUALIFICATION TEST SUMMARY REPORT ESR-9389 Qualification Type Testing of Amphenol Corporation s Connector PREPARED BY: Patrick Cole Design Engineer AMPHENOL CORPORATION Aerospace Operation

C&K ET Series Sealed Subminiature Rocker Switches

Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation

for Quadrax and ELIO 8

1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467

RF Coaxial Connectors SMZ (Type 43)

SMZ (Type 43) Introduction The ITT Cannon range of SMZ connectors are extensively used in 75 communication systems and have become the recognised standard in telecommunications in many parts of the world.

ArcTite. single path to optimal performance. Ultra-low profile bends

ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring

800 Pin Receiver and ITA Modules and Contacts 2

TABLE OF CONTENTS 800 Pin Signal Module 800 Pin Receiver and ITA Modules and Contacts 2 Interface Devices (IDs) CASS Receiver 4 Light Weight CASS Receiver 5 80 Series Receiver 6 CASS Connector Module Configuration

SP Series - Part Numbering

SP Series - Part Numbering Features Push-pull self latching technology Ultra precision High contact density High reliability / durability High vibration and outer force resistance Applications Telecommunications

Product Specification QSL RF Connectors

Product Specification QSL RF Connectors 108-2324 04Feb09 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Tyco Electronics QSL RF Connectors which

AMPLIMITE.050 Series Cable Assemblies, Series III

Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements

MIL-DTL Series IV Connectors

DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide

PRODUCT SPECIFICATION

of 3 C Section : For the 200222, 2002323, 2002444, 20025, 200252, 200252, 20026, 200262, 200262, 20028, 200283, 200284, 2002822, 2002824, 200283, 2002832, 2002833, 2002834 and 2002835 series parts..0 GENERAL

305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing

305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style

EN3716 SAE AS81659 ARINC

6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical

ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES

ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS

Stac64 UnSealed connector SyStem

Stac64 A stackable connection system for unsealed applications, providing single and multi-pocket PCB solutions, offering a diverse range of circuit sizes Stac64 34729 Female Signal Receptacle 34803 CTX64

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL

MIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors

MIL-DTL-55302 QPL'D 2 and 3 Row Printed Circuit oard Connectors 17, 29, 33, 41, 53, 62, 65, 72, 80.1, 84, 96, 98, 120, 126, 160 and 160.4 General Specifications Number 17, 29, 33, 41, 53, 62, 65, 72, 80.1,

PHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC

PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction

PRODUCT SPECIFICATION

MultiCat TM In-line Power Connector System WIRE-TO-WIRE AND WIRE-TO-BOARD MALE CRIMP CONTACT (201845-00X0) FEMALE CRIMP CONTACT (201846-00X0) PLUG HOUSING (201840-00XX) RECEPTACLE HOUSING (201841-00XX)

SCE. Snatch Connector Electrical Series

SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,

Mini50 Unsealed Connector System 2.00mm Pitch

USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle

FISCHER FREEDOM TM SERIES

K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68

3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810

1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9

75 Ω BNC Style Connector

7 Ω BNC Style Connector Frequency Range Characteristic Impedance 7 Ω FETURE 7 Ω of BNC style connector BNC style connectors can be mated. Bayonet coupling mechanism for reliable connection. ock Type Bayonet

Shell material Insulator Contacts Sealing Temperature Mating Protection

Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid

MMBX / MCX series R223 / R113 / R213

4 MMBX / MCX series R223 / R113 / R213 CONTENT Pages MMBX Introduction... 4-4 to 4-6 Interface... 4-7 Characteristics... 4-8 Plugs... 4-9 Receptacles... 4-9 to 4-10 Adapters... 4-11 emo board... 4-12

Assembly, Installation, and Removal of Contacts and modules

Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly

Coaxial N MaleTerminations

Coaxial N MaleTerminations _ MECHANICAL SPECIFICATIONS Brass, Nickel Plated.. high power coaxial N Male Terminations product selection chart P/N Power Avg. Power Peak Length Width CFT-2 NM 2 W 1.5 KW.

RF Coaxial Connectors

SSMB/SSMC Introduction This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC).

ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES

ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY

DTP Series : Contacts (Open Barrel) Type Barrel Type GA Size

Deutsch Connectors DTP Series Deutsch s DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed

Amphenol SCE2/Terrapin Series

APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR

1000 Series Miniature Slide Switches

Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

P Straight PCB Panel Mount Receptacle

How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series

How to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION

hermetically sealed connectors are designed to meet environmental conditions of extreme pressure differential. These connectors are part of the ITT Cannon D Subminiature series and are qualified to MIL-C-24308

SMA Reverse Coaxial Connector Up to 26.5GHz

SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's

Amphenol Australia. ATM Series PRODUCT SHORTFORM. Amphenol Australia Pty Ltd. ATM Series

EX-STOCK AUSTRALIA ATM Series PRODUCT SHORTFORM Amphenol Australia Pty Ltd ATM Series ATM Series connectors are a high-performance, cost-effective solution specifically designed for smaller AWG applications,

MIL-DTL Series III Connectors

RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection

Electrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms

Applications Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Description Screw