AMPLIMITE Cable Connector Accessories

Size: px

Start display at page:

Download "AMPLIMITE Cable Connector Accessories"

Colin Griffin
5 years ago
Views:

MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to

1 MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address our customer s needs. Our reliable MPLIMITE cable connectors are available in a variety of plating types to satisfy different applications. These connectors are intermateable with any size 20 or 22 Dsubminiature connector dimensionally complying with MILC Features & Benefits Low cost, high performance precision formed contacts Crimp snapin contacts allow loading of only the number of contacts being used Numerous cable clamps and mating hardware options pplications Industrial machinery Medical instrumentation Computers and peripherals RID storage arrays File servers/routers Tape storage systems Work stations Onmachine industrial communications Personal and handheld devices

2 How to Select an MPLIMITE Connector Part Number The charts on the following pages highlight the MPLIMITE part numbers with the key product attributes to help identify the correct part for your application. Each section also includes a list of materials to characterize the composition of each part. HDP20 Connector Contacts, Precision Formed Crimp SnapIn Contacts With Insulation Support Pin Socket Hand Tools for Loose Form Contacts Wire Range: WG Insulation Diameter Max. Contact Finish (Plating Code) Strip Form Loose Form Strip Form Loose Form ProCrimper II Hand Tool CertiCrimp II Hand Tool (Color Code) pplicators* for Strip Form Contacts B C Blue Dot *** 2824 D B Black Dot *** D B C Yellow Dot *** D B C Red Dot *** D Without Insulation Support Wire Range: WG Insulation Diameter Max. Contact Finish (Plating Code) Pin Socket Hand Tools for Loose Form Contacts Strip Form Strip Form CertiCrimp II Hand Tool (Color Code) pplicators for Strip Form Contacts (blue dot) *** *For Part Nos. of Special pplicators and pplicators for other model machines, call the TE Connectivity Tooling ssistance Center at C (red dot) ***For use with MPOMTIC Model II StripperCrimper Machine Pin: Brass Socket: Phosphor bronze B C D (green dot) 1. Wire Insulation diameter is limited by the connector housing cavity and clearance for the inseration/extraction tool. 2. ll part numbers are RoHS compliant. Plated: : select: gold flash over nickel on entire contact, with additional gold on mating end B: duplex: gold on mating end, tin on termination end, with entire contact nickel underplated C: gold flash over nickel on entire contact D: duplex: gold flash on mating end, tin on termination end, with entire contact nickel underplated With Insulation Support Without Insulation Support Pin 1 Pin 2 Socket 1 Socket 2 PGE 2

3 HDP20 Connector Contacts, Precision Formed Square Posted Contacts Pin: Brass Socket: Phosphor bronze Plated: : duplex plated gold on mating end, with entire contact min. nickel underplated B: duplex plated gold flash on mating end, with entire contact min. nickel underplated Contact Finish (Plating Code).125 Post Length*.188 Post Length*.427 Post Length*.651 Post Length* Socket Pin Pin Socket Pin Socket B *Length of post extending from rear of HDP20 metalshell connector 18 WG Max. Wire (.46 Max. Conductor Diameter) Strip Form Contact Number Loose Form Contact Number 1. ll part numbers are RoHS compliant. Pin Socket Pin Socket Square Posted Contacts Solder Cup Contacts, SnapIn HDP22 Crimp SnapIn Contact Connectors Precision Formed Crimp SnapIn Contacts, 22 DF Wire WG Strip form contacts shipped 20,000 pcs/reel. HDE20 Crimp SnapIn Contact Connectors Ferrules for Shielding Hardware Kits Contact Finish Hand Tools for Loose Form Contacts: Strip Form Loose Form Strip Form Loose Form (Plating Code) PROCRIMPER II HND TOOL Steel (annealed), tin plated 1. ll part numbers are RoHS compliant. * Die sets used with Hand Crimping Tool Part No or Pneumatic Bench Tool Part No equipped with Die Set Holder Part No B Pin Socket Pin: Brass Socket: Phosphor bronze Finish: : duplex plated gold on mating end, tin on crimp barrel, with entire contact underplated B: duplex plated gold flash on mating end, tin on crimp barrel, entire contact nickel plated Style L Dimension Cable Diameter Ferrule Die Sets* 13 Stepped Stepped Stepped Stepped Stepped Stepped Straight Straight Stepped Stepped Stepped Stepped Straight HDE20 Contacts, Precision Formed Interchangeable Contacts, Crimp SnapIn Wire Range WG Insulation Diameter Code* Single Wire Two Wire Contact Finish (Plating Code) B Contact Part Numbers Pin Strip Form Socket Strip Form * Code indicating accepted wire size range is stamped inside insulation crimp barrel of each contact 1. Extraction Tool No is used to remove pin and socket contacts. 2. Strip form contacts shipped 10,000 pieces/reel. Phosphor bronze, duplex plated as follows: : Duplex plated gold on mating end, tin on termination end, with entire contact nickel underplated B: Gold flash on mating end, tin on termination end, with entire contact nickel underplated PGE 3

4 ų Unshielded Cable Clamps Straight/ 90 Exit Dim. Dim. B Cable Dia (Max.) Cable Clamp Kit No. (Individual) Cover: Polypropylene, black Strain Relief Clip: Stainless steel Retainer Clip: Stainless steel Screws: carbon steel, zin plated Cable Gate: Polypropylene, black 1. ll part numbers are RoHS compliant. *For metal shell connectors only. ** Type 2 Retainer Clip. ***For metal shell or all plastic connectors 180 / 120 Exit Range (Ref.) Dim Kit No.* with Retainer Screws and Clips ** Kit No.*** without Retainer Screws and Clips Packaging unit kit Cable Clamp Housing: Thermoplastic, black with textured finish 440 Mounting Screws: Steel, tin plated 440: Housing Screws & Hex Nuts: Steel, zinc plated 1. ll parts are packaged unassembled. 2. Straight or 90 cable exit is achieved by inserting MPTY Cable Ties through cable tie openings and clamping the cable to one housing half only. 3. ll part numbers are RoHS compliant. bulk pkg. unit kit bulk pkg. unit kit Unshielded Cable Connectors and Clamp Kits Unshielded Cable Clamp Kits with HDP20 Connectors Range (Ref.) Dim. Plug Kit Part No. Receptacle Kit Part No Unshielded Cable Clamp Kits with HDE20 llplastic Connectors Range (Ref.) Dim. Plug Kit Part No. Packaging /pack 1. ll part numbers are RoHS compliant. Unshielded Cable Clamps Packaging 100/pack Cover: Polypropylene, black Retention Screws: Steel, zinc plated Retention Clips: Stainless steel Cable Gate Plug: Polypropylene, black Strain Relief Clip: Stainless Steel Self Tapping Screws: Steel, zinc plated Contacts: Brass (HDP Pins), phosphor bronze (all others), plated gold flash on the mating end, min. tin on the terminating end, all over min. nickel underplating Housing: Polyester or nylon, glassfilled, UL rated 94V0, black : Steel, plated min. tin over min. copper 1. ll parts are packaged unassembled. 2. Each kit is comprised of two cover halves (F and M) and an assortment of cable support gates. 3. Cable support gate must be used as shown for small diameter cable. *Each part is individually bulk packed for multiple kit orders. Straight Exit Low Profile for Jacketed Cable Dim. Dim. B: When Used on Plug Dim. B: When Used on Receptacle (Max.) Cable Clamp Kit No. (Individual) Cable Clamp Kit No. (Bulk Packed) Exit Low Profile for Jacketed Cable Dim. B: When Used on Plug Dim. B: When Used on Receptacle (Max.) Cable Clamp Kit No. (Individual) Material Black Thermoplastic 1. ll parts are packaged unassembled. 2. Each kit is comprised of a cover half and an assortment of cable support gate latches. 3. ll part numbers are RoHS compliant. Straight Exit Low Profile for Jacketed Clamps PGE 4

5 Unshielded Cable Clamps SlideOn Back Cover Dim. Back Cover Kit No. Individual ll parts are packaged unassembled. 2. Each slideon back cover kit includes two identical cover halves which snap together over the connector. 3. ll part numbers are RoHS compliant. Box and Lid Straight/90 Exit Cable Clamp Kit with Male Screw Retainers Cable Clamp Kit No ll parts are packaged unassembled. 2. Each kit is comprised of a cable clamp and male screw retainer hardware. Male screw retainers are also available in kit form. 3. ll part numbers are RoHS compliant. Cable Clamp Housing: Thermoplastic, black with textured finish Gates: Thermoplastic, black Flat Head Screws: Steel, black, zinc plated Male Screw: Steel, zinc plated yellow chromate Retaining Clip: Stainless steel Box and Lid Straight/90 Exit Max. (Ref.) Cable Clamp Kit No. Dim. Dim. B Straight Cable Exit 90* Cable Exit Individual Bulk Packed* ll parts are packaged unassembled. 2. Cable diameter is adjustable by changing support gates. Use the flat side of cable support gates for discrete wire, and the semicircle side for jacketed cable. 3. Cable clamp assemblies are available in kits with male screw retainers. *Each part is individually bulk packed for multiple kit orders. Clam Straight/45 Exit Dim. Dim. B Dim. C Dim. D (Max.) Short Cable Clamp: Individual Standard Cable Clamp: Individual Stardard Cable Clamp: Bulk Packed Cable Clamp Housing: Thermoplastic, black with textured finish Gates: Thermoplastic, black Pan Head Screws, 632 Set Screw and 632 Square Nut: Steel, zinc plated (sizes 1 and 2 include self tapping screws only) 1. ll parts are packaged unassembled. 2. Quantity of pan head screws supplied with cable clamp assembly varies with shell size. 3. ll pan head screws have combination crossrecessed and slotted heads. 4. ll parts are RoHS compliant. *Each part is individually bulk packed for multiple assembly orders. Unshielded Cable Clamps Clam Straight/45 Exit Cable Clamp Kits with Male Screw Retainers Short Cable Clamp: Individual Standard Cable Clamp: Individual Standard Cable Clamp: Bulk Packed Cable Clamp Housing: Thermoplastic, black with textured finish Gates: Thermoplastic, black Pan Head Screws, 632 Set Screw and 632 Square Nut: Steel, zinc plated (sizes 1 and 2 include self tapping screws only) Male Screw: Steel, zinc plated yellow chromate Retaining Clip: Stainless steel 1. ll parts are packaged unassembled. 2. Each kit is comprised of a cable clamp and male screw retainer hardware. Male screw retainers are also available in kit form. 3. ll parts are RoHS compliant. *Each part is individually bulk packed for multiple assembly orders. PGE 5

6 Unshielded Cable Clamps Cable Clamp Kits with Grommets Straight Exit Dataphone Dim. Dim. B Max. (without gate) Max. (with gate) Cable Gate Identification* 2 2B 2C Threaded Cable Clamp Kit No., Cable Clamp Housing: Nylon, black 440 Fillister Head Screws & Hex Nuts: Steel, clear zinc plated Jackscrews: Steel, black zinc plated 1. ll parts are packaged unassembled. 2. Cable diameter is adjustable by changing cable support gates. *Moldedin identification is provided on cable support gates to facilitate proper selection with regard to shell size and maximum acceptable cable diameter. Cable Clamp Kits with Grommets Dim. Dim. B Dim. C Dim. D Cable O.D. Range No. of Grommets Per Set Kit Numbers ll parts are packaged unassembled. 2. Jackscrews must be purchased separately. 3. Shielded cable clamps will not accept connector housings with clinch nuts. 4. ll part numbers are RoHS compliant. Straight/90 Exit 4 Cable Clamp Configuration Straight 90 Exit Dim ll parts are packaged unassembled. Dim. B Cable Diameter Camp Clamp Kit No. Individual Each cable clamp assembly includes a yoke, male panel, female panel, and four cable support gates. The cable diameter is adjustable by changing the cable support gates. 3. ll part numbers are RoHS compliant. Shielded Cable Clamps Shield: Zinc alloy, plated nickel over copper 440 Pan Head Screws & Latch Screws (90 Exit Only): Steel, zinc plated One Piece Slide Latch (90 Exit Only): Stainless steel No. of Position 2 15 ID Letter 90 Exit RFI/EMI Die Cast Shields for Jacketed Cable (Two Piece) E H K Material Black thermoplastic W/ Ferrule Part No Cable Clamp Housing: Nylon, black 440 Fillister Head Screws & Hex Nuts: Steel, clear zinc plated 440 Mounting Screws: Steel, zinc plated Jackscrews: Steel, black zinc plated Straight Exit RFI/EMI Die Cast Shield For Jacketed Cable (Two Piece) 1. ll parts are packaged unassembled. 2. Each kit comprised of a twopiece shield with 2 pan head screws. 3. ll part numbers are RoHS compliant. Grommet Kit * (No. of Positions) Dim. 2(15) w/ Ferrule Shield with Slide Latch Kit No. (see note 2) * Shield without Slide Latch Kit No. (see note 3) Grommet Kit ll parts are packaged unassembled. 2. Each kit is comprised of a twopiece shield with three pan head screws and a slide latch with two 440 slide latch screws. 3. Each kit is comprised of a twopiece shield with three pan head screws. 4. ll part numbers are RoHS compliant * With Grommet Kit: 2= , 3= (25) * PGE 6

7 Shielded Cable Clamps Grommet Sets Dim. Dim. B Dim. C Dim. D Cable O.D. (Max.) Die Cast Shield Kit Numbers MetalPlated Plastic Shield Kit Numbers Cable O.D. Range No. of Grommets Per Set Part Number **.620** ** Die Cast Shield: Zinc alloy, plated bright nickel over bright copper MetalPlated Plastic Shield: Thermoplastic, plated nickel over copper 440 Fillister Head Screws and Hex Nuts: Steel, zinc plated 440 Mounting Screws: Steel, zinc plated Jackscrews: Stainless steel, passivated HDE or HDP Plug or Receptacle D B C Cable Clamp Kits with Grommets Dim. Dim. B Dim. C Dim. D Cable O.D. (Max.) No. of Grommets Per Set Die Cast Shield with Grommets MetalPlated Plastic Shield with Grommets **.620** ** ll parts are packaged unassembled. 2. Jackscrews must be purchased separately. 3. Shielded cable clamps will not accept connector housings with clinch nuts. 3. ll part numbers are RoHS compliant. **The following dimensions apply to metalplated plastic cable clamps. 1: C=.570, D=.630 3: D= PGE 7

8 Shielded Cable Clamps (Max.) Straight Exit Shield: Die Cast When using these Shield Kits Straight Exit Shield: Metal Plated Plastic 90 Exit Die Cast Shield: W/ Slide Latch 90 Exit Die Cast Shield: W/O Slide Latch Split Ring*Ferrule No. Inner Use these Ferrules Crimp Ferrule No. and Tooling No. ** Outer Die Set For Hand Tool pplicator Die Set ll part numbers are RoHS compliant. *For splitring ferrules, Min. O.D. is.040 smaller than Max. O.D. **For inner and outer ferrules, Min. O.D. is.050 smaller than Max. O.D. t the Max. O.D., the Min. insulation thickness is.060. Outer Ferrule: Copper, plated [ ] min. tin Inner Ferrule:.023 [0.58] thick brass, plated [ ] tin over copper PGE 8

9 Hardware Male Screw Retainer Kit No. Male Screw Finish Thread Dim. Individual Bulk Packed* M3 (Metric) Commoning Strip (for HDF20 Plugs, 20 Pin Contacts): Brass,.004 [.10] thick, tin plated Part Number: (continuous strip) Male Screw Retainers for Metal Connectors (HDE and HDP): Male Screw: Steel, zinc plated clear or yellow chromate Retaining Clip:.012 [.31] stainless steel 1. ll parts are packaged unassembled. 2. Each kit is comprised of two male screws and two retaining clips. Male screw retainers are also furnished as part of cable clamp kits. 3. Male screw retainers mate with female screwlocks, with HDF metalshell connectors featuring 440 threaded inserts and with HD metalshell board mount connectors featuring 440 threaded inserts or female screwlocks. 4. Retaining clip must be assembled onto connector flanges with threaded hole toward wire side of connector. 5. ll screws have straight slotted heads except where noted. 6. Retinaing Retaining clip must be assembled onto connector flanges with notched side of retainer toward mating side of connector. 7. ll part numbers are RoHS compliant. *Each part is individually bulk packed for multiple kit orders. Female Screwlocks for Metal and llplastic Connectors (HDE, HDF, HDP) Connector Used With HD llplastic Right ngle Plugs and Receptacles HDE Metal or llplastic Plugs and Receptacles HDP or HDF Metal or llplastic Plugs and Receptacles HD or HDF ll Plastic Plugs and Receptacles with Integral Standoffs Style Dim. C Thread Finish Individual Bulk Packed () (B) (B).312 (B) ll parts are RoHS compliant. 2. Part No , dimensions M3 (Metric) Each part is indiviudally bulk packed for multiple kit orders. **With captivated star washer. No additional hardware included. **M2.6 is the female thread size. The male thread size is 440. ***M3 is the female thread vsize. The male thread is 440. Connector Used With HD llplastic Right ngle Plugs and Receptacles HDE Metal or llplastic Plugs and Receptacles ll Parts: Cold rolled steel, zinc plated clear or yellow chromate 1. ll parts are packaged unassembled. 2. Each female screwlock kit is comprised of two assemblies. 3. One or two flat washers may be required for panel thickness less than.060. Female screwlocks are not recommended for panel thicknesses greater than Female screwlocks with 256 thread size are to be sed with cable clamps with mounting flanges. Female screwlocks with 440 and M3 (Metric) thread sizes can be used with all other cable clamps. 5. Female screwlocks mate with male screw retainers. 6. Short female screwlocks cannot be used with HDF connectors. 7. ll part numbers are RoHS compliant. Style Dim. C Thread Finish Individual Bulk Packed () (B) M2.6** (Metric) M3*** (Metric) Screwlocks xx xx (Special) Dim. Two Per Package Bulk Packed* These dimensions must be maintained to assure satisfactory operation of the spring latches. 2. Twopiece spring latches mate with latching blocks. 3. ll part numbers are RoHS compliant. *Two piece spring latches are individually bulk packed for multiple part orders. Stainless Steel Thread Screw Length: L Packaging Screw Style Unit* Bulk 1 Part No Unit ** *Two assemblies per package. **Designed for cable clamps with mounting ears. No flat washers included. Screw, Washers and Hex Nuts: Cold rolled steel, zinc plated clear chromate Clip: Stainless steel PGE 9

10 Hardware 440 Screws, Washers and Hex Nuts: Steel, zinc plated yellow chromate 256 Screws, Washers and Hex Nuts: Steel, zinc plated clear chromate Slide Latch: Stainless steel 1. ll parts are packaged unassembled. 2 3 Style Dim. II II III Dim B Dim. C Each kit is comprised of a slide latch and two screws, flat washers (if required), lock washers and hex nuts..415 Individual Slide Latch Only III Style I slide latches are also furnished as part of cable clamp kits. 3. Style I slide latches can be used with cable clamps that do not extend beyond the front flange of the connector or on connectors without cable clamps. 4. Style II slide latches can be used with any cable clamp that has the mounting ear configuration. 5. Style III slide latches can be used on connectors without cable clamps or with cable clamps that do not have the mounting ear configuation. 6. Slide latches mate with locking posts. 7. No nuts, washers, or lockwashers. 8. ll parts are RoHS compliant. III Slide Latch Kit No. Thread Locking Post Finish Yellow Chromate Clear Chromate Yellow Chromate Yellow Chromate Dim Dim. B ll Parts: Cold rolled steel, zinc plated clear or yellow chromate Individual Bulk Packed* *Each part is individually bulk packed for multiple kit orders ll part numbers are RoHS Compliant Locking Post Kit No. Latching Blocks with Threaded Holes (No. of Contact Pos.) 1 thru 4 (9 thru 37) Dim Dim. B Panel Thickness Rear Panel Latching Block Part No. Front Panel Latching Block Part No. Thread Individual Bulk Packed* Individual Bulk Packed* M M (50) Latching Blocks: Zinc Pan Head Screws: Steel, zinc plated Latching Blocks with Slot Recess and Thru Hole Latching Blocks with Slot Recess and Thru Hole (No. of Contact Pos.) (No. of Contact Pos.) 1 thru 4 (9 thru 37).400 Dim. Dim. B Dim. C Gasket Part No. 1 (9) (15) (25) (37) ll parts are RoHS compliant. Rear Panel Latching Block Part No. Front Panel Latching Block Part No. Dim. Dim. B Panel Thickness Individual Bulk Packed* Individual Standoff Bushings Material: luminum Keying Plug Material: Polyphenylene oxide EMI/RFI Gaskets : Brass,.006 thick; bright tin plated (50) Latching Blocks: Zinc 1. Mounting screws and nuts are to be supplied by customer. 2. These latching blocks allow mounting screws to be installed thru the front of the block and to be screwed into the bracket of a rightangle connector, a fixed insert in a connector mounting flange, or a nut behind the connector mounting flange. 3. Latching blocks mate with spring latches. 4. ll part numbers are RoHS compliant. *Bulk packed for multiple part orders. **Individual kits contain two latching blocks per package PGE 10

11 Resources: Product Specification pplication Specifications Instruction Sheets TE Technical Support Center US: Canada: Mexico: Latin/S. merica: Germany: UK: France: Netherlands: China: te.com MP, MPLIMITE, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks of the TE Connectivity Ltd. family of companies. ll other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity s obligations shall only be as set forth in TE Connectivity s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application TE Connectivity Ltd. family of companies ll Rights Reserved /18

AMPLIMITE* HDP- 20 and Economy

AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].