Amphenol Industrial Threaded AIT

Transcription

1 mphenol Industrial Threaded IT IT Series is a low cost, MILDTL5015 threaded type connector for use in harsh environmental conditions. This popular, cylindrical connector is particularly well suited to commercial applications where a low cost, yet rugged connector is required. Over 286 contact layouts are available from 1 to 85 circuits and up to 150 amps per contact. The standard MILDTL5015 layouts allow the mixing of power and signal contacts, power only, or signal only. Contacts are available in solder, crimp, or PC terminations covering wire gauges from size 24 to size 0 WG. Thermocouple (J, Y, K, T) and coax contacts are also available. These connectors are completely sealed to withstand moisture, condensation, vibration, and flashover across a broad range of wire diameters. When the two connector halves are mated, the rearsealing grommet along with a dynamic interfacial seal at the front, create an environmentally sealed assembly Series IT pplications Military, Industrial and Commercial environments requiring extreme reliability, high power handling and low cost. Power Generators Engines Sensors Motion Control Offroad Vehicles Earth Moving Equipment Ships Mobile Equipment Industrial Machinery Telecommunications Features gency pprovals MILDTL5015 (MILC5015) road Temperature Range These connectors will operate in temperatures ranging from 67 F to +257 F (55 C to +125 C) under extremely harsh conditions. Environmental These connectors will perform in the full range of operating conditions as defined in MILDTL5015 and are recommended for conditions where vibration, moisture, pressure and/or temperature are extreme. Resilient Insulator resilient neoprene insulator provides a liquidtight assembly. Rugged Shell The rugged aluminum alloy shell and hardware are light in weight yet highly resistant to damage and corrosion. Shells are available in 5 different styles and in 19 sizes. Wide Range of Wire Gauges and Current Carrying Capacity Up to 150 amps for standard military contacts and up to 255 amps using Radsok contacts. Wire gauges from 24 to size 0 WG. Wide Variety of Contacts Machined contacts with silver or gold plating are available in sizes from 16 through 0. Solder, Crimp, PC, and Thermocouple contacts are available. mphenol For ssistance in Europe Please See the ack Cover For a Complete Listing of Our ranch Offices and Contact Numbers. Specifications subject to change. 43

2 5015 Series IT 44 IT mphenol Industrial Threaded STEP 1 Choose Shell Style: Receptacle or Plug (See Connector Solutions Guide) Wall Mount Receptacle with ccessory IT0 Threads (MS3100) Type Cable Mount Receptacle with ccessory IT1 Threads (MS3101) Type mates with Straight Plug (MS3106) Type IT6 Right ngle Plug not available in shell sizes 8, 32, or 36 not used with RU endbell option IT8 t oot options S Straight oot Expanded Recovered HST Heat Shrink Tubing Expanded Recovered CS Convoluted Shrink oot Expanded Recovered S/HS ottle Shaped Shrink oot (High Ratio ottle Shaped oot) Expanded Recovered RS Right ngle Shrink oot Expanded Recovered Spring Shielding Tape STEP 3 Choose Heat Shrink oot or Tubing Heat Shrink Product CS2 CS3 CS4 CS5 S1 HS2 S2 S3 S4 S5 S6 S7 Expanded ID inch (mm) (17.8) (26.9) (36.6) (45.7) (23.9) (8.9) (30.0) (31.0) (36.1) (42.9) (59.9) (50.8) Recovered ID inch (mm) (8.1) (12.7) (17.5) (22.4) (6.1) (3.6) (6.1) (7.1) (8.4) (9.9) (16.0) (17.0) Length Max inch (mm) (133.4) (146.1) (158.8) (171.5) (38.1) (55.1) (55.1) (67.1) (80.0) (99.1) (130.0) (170.9) 8S u 10SL u u u u 12/12S u u u u 14/14S u u u u u u 16/16S u u u u u 18 u u u u u 20 u u u u 22 u u u 24 u u u 28 u u u 32 u u u u 36 u 40 u u Shell Shell STEP 2 Choose Endbell Most Popular Heat Shrink S S S S S S S S HST HST HST HST Product Expanded ID inch (mm) (22.4) (25.7) (29.5) (34.3) (37.3) (43.7) (50.5) (62.7) (19.1) (25.4) (31.8) (39.9) Recovered ID inch (mm) (6.4) (7.4) (8.4) (9.7) (10.4) (11.2) (13.0) (17.0) (6.4) (8.1) (10.6) (13.0) Length Max inch (mm) (105.9) (121.2) (138.7)(159.5) (177.8) (203.2) (203.2) (203.2) (152.4) 8S u 10SL u u 12/12S u u 14/14S u u u 16/16S u u u 18 u u u 20 u u 22 u u 24 u u u 28 u u u 32 u u u u 36 u 40 u Shell Potted U = Unshielded US = with shielding spring UT = with shielding tape UW = with shielding tape & spring For use with grommets (wire seals) D = Unshielded RU DS = with shielding spring DT = with shielding tape DW = with shielding tape & spring Note: Cable outside diameter must be between expanded and recovered dimensions. adhesive lined heat shrink tubing Heat Shrink Product RS1 RS2 RS3 RS4 RS5 RS6 RS7 RS8 Expanded ID inch (mm) (22.4) (25.7) (29.5) (34.3) (37.3) (43.7) (50.0) (62.7) Recovered ID Inch (mm) (5.8) (6.6) (7.6) (8.9) (9.4) (11.2) (13.0) (17.5) Length Max inch (mm) (105.2) (124.0) (146.3) (172.2) (185.2) (213.6) (224.5) (227.3) 8S u 10SL u u 12/12S u u 14/14S u u u 16/16S u u 18 u 20 u 22 u u 24 u u 28 u u 32 u u u 36 u 40 u In North merica: Pricing Delivery: Tech Support: Specifications subject to change. Right ngle Call for more info

3 CG = Straight dapter Endbell OR t t OR Shell Shell t Unshielded Conduits C* = conduit adapter for plastic flexible conduit. dd size code i.e. CGC10 Note: Normal recommended conduit fill is 40% of Conduit ID or less. Shielded Cord Grip R = with reducer Code MSS* Min Max Min Max Min Max Min Max mm mm mm mm mm mm mm mm 8S u SL u /12S u /14S u /16S u u u u u u u u u mphenol Industrial Threaded IT STEP 2 Choose Endbell STEP 3 Choose Conduit dapter or Cord Grip Unshielded Cord Grip Code Conduit ID Inch (mm) (6.5) (10.0) (12.0) (14.3) (16.5) (23.0) (29.0) (36.0) Conduit OD Inch (mm) (10.0) (13.0) (15.8) (18.5) (21.2) (28.5) (34.5) (42.5) 8S u u 10SL u u 12/12S u u u 14/14S u u u u u 16/16S u u u u 18 u u u u 20 R R u 22 R R u 24 R R u 28 R R R u 32 R R R u 36 R u 40 R u Shell RG = Right ngle dapter Endbell Conduit dapter and Cord Grip Types C*= Conduit dapter MSS*= Metal Short Shielded Nickel Plated rass PF*= Plastic with Flex Spring PS*= Plastic Short MS*= Metal Short Nickel Plated rass PL*= Plastic Long ML*= Metal Long Nickel Plated rass *= add size code per chart i.e. CGPF or CGMSS4 Min/Max refers to cable diameter. For detailed info on shield diameters, see MSS table on page 232. Code Code R Min Max Min Max Min Max Min Max Min Max PF* PS* MS* mm mm mm mm PL* ML* mm mm mm mm mm mm 8S SL /12S /14S /16S Example of part description: IT1 CG PFR 10SL Shell Endbells/ Wire Connector Contact Rotation Contact Platings/ Style Shielding Protection Layout Type Modifications (See Connector Solutions Guide) P Please call for more information Note: Cable jacket and shield diameters must be between Min/Max of cord grip STEP 4 Choose Connector Layout See Connector Solutions Guide STEP 5 Choose Contact P = Pin S = Socket STEP 6 Choose Rotation (omit for normal) W X Y Z STEP 7 Choose Contact Type S = Solder C = Crimp 0 = Less contacts For ssistance in Europe Please See the ack Cover For a Complete Listing of Our ranch Offices and Contact Numbers. Specifications subject to change. S STEP 8 Choose Platings/ Modifications CONTCTS Omit = Silver plated contacts 30 = Gold 50µ Gold over Nickel SHELLS Standard Plating = Conductive olive drab chromate over cadmium 023 = Conductive Nickel (RoHS< with crimp contacts) 025 = NonConductive lack Zinc (RoHS< with crimp contacts) 027 = Conductive lack Zinc (RoHS< with crimp or 116 contacts) 116 = Solder Style Contacts less Pretinned Solder Cups 472 = (RoHS<) 548 = (RoHS<) G96 = NonConductive nodizedf MTERILS Omit = Standard Neoprene For Low Smoke, Zero Halogen, High Temperature Viton, and other materials call. Note: F Endbells U & CG will be lack nodized. < s reported by mphenol, please call for more info Series IT 45

4 5015 Series IT IT Dimensions Receptacle Styles S R S R T 4 Holes IT0 Thread M L P Q IT1 Thread L Thread IT0 IT1 IT1 IT0/IT1 M T Diameter Ø Shell Thread P R S Q Thread Class REF. ±.005 ± L Diameter Class 2 8S UNEF UNEF (14.3) (2.8) (15.1) (22.2) (3.0) (27.6) (13.5) 10S UNEF UNEF (0.6) (2.8) (18.3) (25.4) (3.0) (27.6) (16.0) 10SL UNEF UNEF (0.6) (2.8) (18.3) (25.4) (3.0) (27.6) (19.2) 12S UNEF UNEF (14.3) (2.8) (20.6) (27.8) (3.0) (27.6) (19.2) UNEF UNEF (19.1) (2.8) (20.6) (27.8) (3.0) (33.9) (19.2) 14S UNEF UNEF (14.3) (2.8) (23.0) (30.2) (3.0) (27.6) (22.4) UNEF UNEF (19.1) (2.8) (23.0) (30.2) (3.0) (33.9) (22.4) 16S UNEF UNEF (14.3) (2.8) (24.6) (32.5) (3.0) (27.6) (25.7) UNEF UNEF (19.1) (2.8) (24.6) (32.5) (3.0) (33.9) (25.7) NEF UNEF (19.1) (3.6) (27.0) (34.9) (3.0) (33.9) (28.9) NEF NEF (19.1) (3.6) (29.4) (38.1) (3.0) (33.9) (32.1) NEF NEF (19.1) (3.6) (31.8) (41.3) (3.0) (33.9) (35.4) NEF NEF (20.6) (3.6) (34.9) (44.5) (3.7) (35.7) (38.6) NS NEF (20.6) (3.6) (39.7) (50.8) (3.7) (35.7) (45.1) NS NS (22.2) (4.0) (44.5) (57.2) (4.4) (37.3) (50.7) UN NS (22.2) (4.0) (49.2) (63.5) (4.4) (37.3) (57.2) UN UN (22.2) (4.0) (55.6) (69.9) (4.4) (37.3) (63.7) 46 ll dimensions in inches (millimeters in parenthesis) In North merica: Pricing Delivery: Tech Support: Specifications subject to change.

5 D ±.003 (0.08) 125 L Universal Heat Shrink K Z JJ Dimensions IT Shell LF Max DØ K Max ZØ Cable Max* Ø Max JJØ Max C Code 8S (61.4) (18.8) (11.0) (7.2) (9.9) (12.3) 10S Call 10SL (61.6) (18.8) (11.0) (8.6) (12.5) (14.9) 12S (64.0) (18.8) (11.0) (8.6) (12.5) (14.9) 12 Call 14S C (61.6) (22.0) (12.1) (12.9) (16.9) (19.9) 14 Call 16S D (63.9) (25.2) (12.1) (15.7) (20.5) (23.5) D (70.1) (25.2) (12.1) (15.7) (20.5) (23.5) E (73.0) (29.1) (12.1) (15.7) (20.9) (23.9) F (75.8) (32.3) (12.1) (17.1) (22.6) (25.6) G (74.5) (36.3) (12.1) (18.6) (24.2) (27.2) H (78.9) (39.4) (12.1) (21.4) (27.8) (30.8) H (80.9) (44.2) (12.1) (21.4) (27.8) (30.8) (95.1) (53.8) (12.1) (28.6) (36.0) (39.0) (92.2) (58.2) (12.1) (31.5) (39.2) (42.2) (97.7) (64.0) (12.1) (37.1) (45.5) (48.5) 5015 Series IT 125 D ±.003 (0.08) Z L UNPG Cord Grip Shell LF Max DØ K Max ZØ Cable Max* Ø Max C Code 8S (52.1) (18.8) (3.0) (8.4) (14.8) 10S Call 10SL C (53.0) (22.0) (3.0) (9.5) (18.0) 12S D (53.3) (25.2) (3.0) (9.5) (21.2) 14S D (53.3) (25.2) (3.0) (12.1) (22.6) 16S E (57.0) (29.1) (3.0) (14.8) (25.1) E (63.3) (29.1) (3.0) (14.8) (25.1) F (63.8) (32.3) (3.0) (17.5) (28.3) G (66.6) (36.3) (3.0) (20.0) (32.3) G (66.6) (36.3) (3.0) (22.2) (32.3) H (67.0) (39.4) (3.0) (24.3) (35.4) (69.8) (46.2) (3.0) (28.3) (42.2) (71.1) (52.2) (3.0) (32.2) (48.2) (72.4) (58.2) (3.0) (40.8) (54.2) (75.5) (64.0) (3.0) (41.2) (60.0) F L is the maximum reference length from the mating face of the connector * Recommended cable maximum is 90% of actual endbell I.D. For ssistance in Europe Please See the ack Cover For a Complete Listing of Our ranch Offices and Contact Numbers. Specifications subject to change. K ll dimensions in inches (millimeters in parenthesis) 47

6 5015 Series IT IT Dimensions Style 6 Plugs (arrel ssembly) IT6 Thread L Thread Q Q arrel Shell Thread Diameter Thread Class 2 Max Class 2 8S UNEF UNEF (18.8) 10S NEF UNEF (22.1) 10SL NEF UNEF (24.0) 12S UNEF UNEF (25.3) UNEF UNEF (24.3) 14S UNEF UNEF (28.5) UNEF UNEF (28.5) 16S UNEF UNEF (31.8) UNEF UNEF (31.8) NEF UNEF (33.9) NEF UNEF (37.1) NEF UNEF (40.3) NEF UNEF (43.6) NS UNEF (50.0) NS UN (56.1) UN UN (62.6) UN UN (69.1) 48 ll dimensions in inches (millimeters in parenthesis) In North merica: Pricing Delivery: Tech Support: Specifications subject to change.

7 D ±.003 (0.08) 125 L Universal Heat Shrink K Z JJ Dimensions IT Shell LF Max DØ K Max ZØ Cable Max* Ø Max JJØ Max C Code 8S (60.5) (14.0) (11.0) (7.2) (9.9) (12.3) 10S Call 10SL (61.5) (18.8) (11.0) (8.6) (12.5) (14.9) 12S (64.0) (18.8) (11.0) (8.6) (12.5) (14.9) 12 Call 14S C (61.1) (22.0) (12.1) (12.9) (16.9) (19.9) 14 Call 16S D (61.1) (25.2) (12.1) (15.7) (20.5) (23.5) D (70.1) (25.2) (12.1) (15.7) (20.5) (23.5) E (76.5) (29.1) (12.1) (15.7) (20.9) (23.9) F (76.5) (32.3) (12.1) (17.1) (22.6) (25.6) G (76.5) (36.3) (12.1) (18.6) (24.2) (27.2) H (81.2) (39.4) (12.1) (21.4) (27.8) (30.8) H (82.7) (44.2) (12.1) (21.4) (27.8) (30.8) (96.3) (50.6) (12.1) (28.6) (36.0) (39.0) (93.3) (58.2) (12.1) (31.5) (39.2) (42.2) (98.6) (64.0) (12.1) (37.1) (45.5) (48.5) 5015 Series IT 125 D ±.003 (0.08) Z L K Shell LF Max DØ K Max ZØ Cable Max* Ø Max C Code 8S (52.1) (18.8) (3.0) (8.4) (14.8) 10S Call 10SL C (51.3) (22.0) (3.0) (9.5) (18.0) 12S D (51.6) (25.2) (3.0) (9.5) (21.2) 14S D (51.6) (25.2) (3.0) (12.1) (22.6) 16S E (55.3) (29.1) (3.0) (14.8) (25.1) E (64.9) (29.1) (3.0) (14.8) (25.1) F (65.4) (32.3) (3.0) (17.5) (28.3) G (68.2) (36.3) (3.0) (20.0) (32.3) G (68.2) (36.3) (3.0) (22.2) (32.3) H (68.2) (39.4) (3.0) (24.3) (35.4) (69.8) (46.2) (3.0) (28.3) (42.2) (72.3) (52.2) (3.0) (32.2) (48.2) (73.6) (58.2) (3.0) (40.8) (54.2) (76.5) (64.0) (3.0) (41.2) (60.0) F L is the maximum reference length from the mating face of the connector * Recommended cable maximum is 90% of actual endbell I.D. Cord Grip ll dimensions in inches (millimeters in parenthesis) For ssistance in Europe Please See the ack Cover For a Complete Listing of Our ranch Offices and Contact Numbers. Specifications subject to change. 49

8 5015 Series IT IT Contacts Pin & Socket Crimp Contacts Contact Wire Pin Contact Part Number Socket Contact Pin Contact Socket Contact Silver Gold Silver Gold Wire Strip Lengths Wire Strip Lengths Inches (mm) 16S IC16S16P IC16S16PG IC16S16S IC16S16SG 1214 IC16S12P IC16S12PG IC16S12S IC16S12SG C IC16S14P IC16S14PG IC16S14S IC16S14SG C3 16S 1820 IC16S20P IC16S20PG IC16S20S IC16S20SG C IC16S22P IC16S22PG IC16S22S IC16S22SG C IC16S24P IC16S24PG IC16S24S IC16S24SG C IC1616P IC1616PG IC1616S IC1616SG (7.9) 1214 IC1612P IC1612PG IC1612S IC1612SG C IC1614P IC1614PG IC1614S IC1614SG C IC1618P IC1618PG IC1618S IC1618SG C IC1620P IC1620PG IC1620S IC1620SG C IC162024P IC162024PG IC162024S IC162024SG C IC1622P IC1622PG IC1622S IC1622SG C IC1212P IC1212PG IC1212S IC1212SG.312 (7.9) 12 High Power IC1212SRD 810 IC128P IC128PG IC128S IC128SG C IC1210P IC1210PG IC1210S IC1210SG C IC1214P IC1214PG IC1214S IC1214SG C9 (7.9) 1618 IC1216P IC1216PG IC1216S IC1216SG C IC1218P IC1218PG IC1218S IC1218SG C IC1220P IC1220PG IC1220S IC1220SG C IC88P IC88PG IC88S IC88SG 8 High Power IC88SRD IC810P IC810PG IC810S IC810SG C10 (14.3) 1214 IC812P IC812PG IC812S IC812SG C IC44P IC44PG IC44S IC44SG 4 4 High Power IC44SRD.500 (12.7) 8 IC48P IC48PG IC48S IC48SG C IC00P IC00PG IC00S IC00SG. 0 High Power IC00SRD IC02P IC02PG IC02S IC02SG C11 (19.0) 4 IC04P IC04PG IC04S IC04SG C12 olded items are standard crimp contacts Wire Range Wire Sealing Lengths Inches (mm) (2.33.0) (3.24.5) (3.86.5) (7.19.3) ( ) 50 Solder Thermocouple Contacts Type Pins Sockets 16S lumel P* S* 16S Chromel P* S* Iron P* S* Constantan P* S* 16 lumel P* S* 16 Chromel P* S* Iron P* S* Constantan P* S* Solder Thermocouple Contacts Type Pins Sockets 12 lumel P* S* 12 Chromel P* S* Iron P* S* Constantan P* S* Thermocouple Types: J = IronConstantan K = lumelchromel T = CopperConstantan E = ChromelConstantan *Call for availability 16S contacts are used in 8S, 10S, 10SL, 12S, 14S and 16S connector sizes only. In North merica: Pricing Delivery: Tech Support: Specifications subject to change.

9 ccessories Head goes in first, trim excess. Wire Hole Filler (Color) Crimp Tools Crimp Locator & Die Sets Locator Color Tools Pilot Pin/Insertion Guide for Sockets Contacts IT Insertion Tool Extraction Tool 5015 Series IT Red MS (lue) DK16816 F8 (hand) W27F (pneumatic) TH291 Pinlue SocketGreen DRK59 Kit with Multiple Tips MS (Yellow) Green DK16812 MS (White) MS (lue) MS (Yellow) 400HD Die Set 414D8N Locator 4025Pin 4026Socket 414D4N Die 4043 Set 414D4N Locator 4043 Die Set 414D0N Locator DK282 IC4INS IC0INS IC4EXT IC0EXT Call for additional tool accessories. ll dimensions in inches (millimeters in parenthesis) For ssistance in Europe Please See the ack Cover For a Complete Listing of Our ranch Offices and Contact Numbers. Specifications subject to change. 51

10 5015 Series IT IT Contacts Pin & Socket Coax Contacts Coax Contact 12 Coax Wire RG161/U RG174/U RG179/U RG187/U RG188/U RG316/U Silver Coax Pin Pin Contact Part Number Socket Contact Gold Silver Gold () () Coax Socket () () Wire Strip Length Wire Strip Lengths Inches (mm) Call for details Wire Range Wire Sealing Range Inches (mm) Min. Max (3.2 mm) (4.5 mm) ccessories Head goes in first, trim excess. Wire Hole Filler Yellow RG178/U RG196/U RG58C/U RG141/U RG303/U (1) (5) (3) () (1) () (5) () (3) () RG59/U RG62/U RG62/U RG210/U (1) (5) (3) () () (1) (5) (3) () () 8 RG161/U RG174/U RG179/U RG187/U RG188/U RG316/U (1) (5) (3) () () (1) (5) (3) () () Call for details (3.8 mm) (6.5 mm) White RG180/U RG195/U (5) () () (6) () () RG140/U RG302/U (5) () (5) () RG55/U RG142/U RG142/U RG223/U (5) () (5) () 4 RG59/U RG62/U RG62/U RG210/U () () RG212/U () () RG55/U RG142/U RG142/U RG223/U () () Call for details (7.1 mm) (9.3 mm) lue ( ) Various platings available. vailability of coax contacts varies widely. Call for details. ll dimensions in inches (millimeters in parenthesis) In North merica: Pricing Delivery: Tech Support: Specifications subject to change.

11 Coax Contact Coax Wire M22520/1001 Hand Crimp Tool Tools M22520/501 Crimp Die/Locator Contacts IT Crimp Dies Use Locator Coax Clamp Nut Wrench 5015 Series IT 12 RG161/U RG174/U RG179/U RG187/U RG188/U RG316/U M22520/1001 M22520/ RG178/U RG196/U RG58C/U RG141/U RG303/U M22520/1001 M22520/ RG59/U RG62/U RG62/U RG210/U M22520/501 M22520/ RG161/U RG174/U RG179/U RG187/U RG188/U 8 RG316/U M22520/1005 RG180/U RG195/U M22520/ RG140/U RG302/U M22520/1007 RG55/U RG142/U RG142/U RG223/U RG59/U RG62/U RG62/U RG210/U M22520/501 M22520/545 4 RG212/U M22520/501 M22520/ RG55/U RG142/U RG142/U RG223/U M22520/1001 M22520/1007 For ssistance in Europe Please See the ack Cover For a Complete Listing of Our ranch Offices and Contact Numbers. Specifications subject to change. 53

12 5015 Series IT IT tglance Name: Company: Phone: Qty: EU: dditional Connector Information CONNECTOR Part #: OR # of Contacts: s & Type: CLE Manufacturer: (If Known) CLE Part #: OR Cable OD: Choose One Connector Choose One Endbell Choose One Wire Protection Use endbell U for Menus,, C, D & E Contact Termination Crimp Solder Use endbell CG for Menus F, G & H Comments/Notes: Not available in shell sizes 32 & In North merica: Pricing Delivery: Tech Support: Specifications subject to change.