VL CONNECTOR. 1 Certified LR R Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 6.
|
|
- Nathaniel Lang
- 5 years ago
- Views:
Transcription
1 Crimp.mm (.") pitch Disconnectable Crimp style Wire-to-wire connectors Features Housing lances for contact retention Since the contact retention lances are part of the housing rather than protruding from the contact, they cannot be damaged by handling. They allow the contact to be easily inserted and securely locked into the housing. Secondary retainer The secondary retainer is optionally available. This retainer ensures that the contacts are fully seated and locked in the housing and prevents their accidental release. Installed after the contacts are inserted, it locks and secures the contact. Suited for circuits with high power requirements Since these contacts have large cross-sectional areas and high contact pressure, they can accommodate circuits requiring high power. Panel lock construction Our unique space-saving panel lock is designed to prevent tangling with wires or breaking in cold or dry weather. The VL connector is a.mm (.") pitch wire-to-wire connector designed for circuits requiring up to 0A ( or -circuit with AWG # wire). Specifications Current rating: 0A AC, DC max. Voltage rating: 00V AC, DC max.(00v in accordance with the Electrical Appliance and Material Control Law in Japan) Temperature range: - C to +0 C (including temperature rise in applying electrical current) Contact resistance: Initial value/m Ω max. After environmental testing/0m Ω max. Insulation resistance:,000m Ω min. Withstanding voltage:,000v AC/minute Applicable wire: AWG # to # 0. to.mm Applicable panel thickness: 0. to.0mm(.00" to.0") *Contact JST for details. Note: The current rating varies depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. Current unit: A Wire size (AWG) # # # # # Standards 0Recognized E0 Certified LR0 R0 0 0
2 JST JST Contact. (.). (.).. (.) (.).(.).(.).. (.) (.).0 (.0). (.). (.). (.) Pin contact Socket contact Pin contact Model No. Socket contact mm AWG # 0. to. Applicable wire Insulation O.D. mm(in.) to. to.(.0+.) Q ty / reel SVM-T-P.0 SVF-T-P to to to.+. (.0+.0 to.0+.0) 0. to.0 0 to. to.(0. to.),000 SVM-T-P.0 SVF-T-P to to +.+. to.+. (0.+0. to.0+.0) SVM-T-P.0 SVF-T-P.0..(.) Material and Finish Phosphor bronze, Tin-plated Note:. Contact JST for special products.. SVM-T-P.0 and SVF-T-P.0 are not TÜV approved. Housing Material: Housing...Nylon, ULV-0, white...glass-filled nylon, ULV-0, ivory Voltage rating Current rating Receptacle housing(for pin contact) Plug housing(for socket contact) VLR-0VF VLP-0V VLS-0V 00V 0.0A (.). (.). (.). (.).0 (.).(.).0 (.).0 (.). (.0). (.0). (.). (.0),000 VLR-0V VLP-0V VLS-0V.(.) -circuit housing and -circuit housing). (.). (.). (.) 00V 0.0A 00 00,000. (.).0 (.).(.).0 (.) VLP-0V-.0 (.). (.0). (.).0(.). (.). (.0).(.).0 (.).0 (.).. (.0) (.) Note:. VLR-0VF is exclusively for free hanging. The other circuits can be used either for panel mounted or free hanging.. Contact JST for special products.. VLP-0V- is not TÜV approved. 0
3 Housing Material: Housing...Nylon, ULV-0, white...glass-filled nylon, ULV-0, ivory Voltage rating Current rating Receptacle housing(for pin contact) Plug housing(for socket contact) VLR-0V VLP-0V VLS-0V -circuit housing and -circuit housing). (.). (.) 00V.0A 00 00,000 VLP-0V-.0 (.).0 (.). (.0). (.).(.).(.). (.). (.).0 (.).(.).(.). (.). (.0).0 (.).0 (.).. (.0) (.) VLR-0V VLP-0V.(. VLS-0V 00V.0A. (.). (.). (.).0(.).0 (.).(.) 00.0 (.) VLP-0V-.0 (.).0 (.). (.0).(.0).0. (.) (.0).(.0).0(.) 00. (.). (.0).(.),000 VLR-0VN. (.) VLP-0VN- VLS-0V -circuit housing and -circuit housing).(.0) 00 00,000.(.0).(.). (.). (.).0 (.).(.).0 (.).0 (.).. (.0) (.). (.). (.0) VLR-0V VLP-0V.(.) VLS-0V -circuit housing and -circuit housing). (.) 00V.0A. (.).(.) 00.0 (.) VLP-0V-.0 (.). (.0).(.0) 00.(.),000.0(.).0 (.).(.).(.). (.). (.0).0 (.).0 (.). (.0).(.0) Note:. Contact JST for special products.. Models VLP-0V-, VLP-0V-, VLP-0VN- and VLP-0V- are not TÜVapproved.
4 Housing Voltage rating Current rating Receptacle housing(for pin contact) Plug housing(for socket contact) VLR-0V VLP-0V.(.0) VLS-0V -circuit housing and -circuit housing). (.). (.).(.0) 00V.0A 00 00,000 VLP-0V-.0(.).0 (.).(.) VLR-V VLP-V. (.).0 (.).0 (.). (.0).(.0) 0.(.0). (.). (.0) Material: Housing...Nylon, ULV-0, white...glass-filled nylon, ULV-0, ivory.(.).(.0).0 (.).0 (.). (.0).(.0) VLS-V. (.).(.0) 0 00V.0A VLP-V-.0(.).0 (.).(.).0 (.).0 (.). (.0).(.0) 0.(.0). (.). (.0).(.),000.0 (.).0 (.). (.0).(.0) Note:. Contact JST for special products.. Models VLP-0V- and VLP-V- are not TÜVapproved.
5 Contact position location numbers Contact position numbers are stamped Receptacle housing Plug housing Receptacle housing Plug housing <Inter-housing lock> <Outer-housing lock> 0 0
6 Panel layout Shape l Shape ll.(.).(.) A B. (.) E 0.(.00) C D.(.0) A B E C D.(.) (Single-row) Panel hole Panel hole dimensions mm(in.) General tolerance A, B, D: ±0. (±.00) C, E: ±0. (±.00) Model No. shape A B C D E VLR-0V.(.) 0.(.).(.).(.).(.0) VLR-0V 0.0(.).(.0).(.).(.).(.0) VLR-0V.(.) 0.(.).0(.).(.0).(.) VLR-0VN.(.0).0(.).(.).(.).(.0) VLR-0V 0.0(.).(.0).0(.).(.0).(.) VLR-0V.(.0).0(.).0(.).(.0).(.) VLR-V.(.).(.).0(.).(.0).(.) Receptacle housing Note:. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed.. The strength of the panel must be considered when punching two or more holes.. The connector must be inserted from the same side as the hole is punched. Applicable panel thickness mm(in.) 0. to.0 (.00 to.0) Assembly layout (, and single-row circuits) (,, and circuits) <Inter-housing lock> <Inter-housing lock> 0.(.).(.) including retainer.(.0) 0.(.).(.) including retainer.(.0) including retainer <Outer-housing lock> <Outer-housing lock>.(.).(.) including retainer 0.(.).(.) including retainer 0.(.).(.) including retainer Applicator for the semi-automatic press AP-KN Contact Crimp applicator MKS-L Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC with safety cover without safety cover with safety cover without safety cover with safety cover SVF-T-P.0 APLMK SVF/M-0 APLNC SVF/M-0 SVF-T-P.0 APLMK SVF/M-0 APLNC SVF/M-0 SVM-T-P.0 APLMK SVF/M-0 APLNC SVF/M-0 SVF-T-P.0 APLMK SVF/M-0 APLNC SVF/M-0 SVM-T-P.0 APLMK SVF/M-0 APLNC SVF/M-0
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
More informationUB CONNECTOR. 1Certified LR USB (Universal Serial Bus) Conforming Connector. Features. Specifications. Standards
USB (Universal Serial Bus) Conforming Connector Features Conforms to USB (Universal Serial Bus) standards This connector conforms to the USB standards, that stipulate the serial interface between PC's
More informationMD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
More informationEH CONNECTOR. 1Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
More informationEH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high
More informationRWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
More informationPH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. 2.0mm
Crimp.mm (.") pitch PH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features This is a thin, lowprofile.mm (.") pitch connector.mm (.") in height after mounting and.mm (.1") in width. It
More informationFAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationHCMCONNECTOR HCM. Board-to-wire/Wire-to-wire. Features. Specifications
Board-to-wire/Wire-to-wire HCM.64 non-waterproof low profile type connector for automobile corresponding to the miniaturization of the automotive electrical equipment. Comply with the performance specification
More informationCF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More informationWater-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
More informationRA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More informationConnector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
More informationJ&JK SERIES SUBMINIATURE. DCONNECTOR EMI prevention shielding cover ( J cover) J COVER. Cover nut. Cover. Dimensions mm(in.) W.
ccessories DCONNECTOR EMI prevention shielding cover ( J cover) SUMINITURE J&JK SERIES J COVER J cover nut Features This shielding cover is made of mild steel, formed by our advanced stamping technology,
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More information1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationPRODUCT SPECIFICATION
MICRO-FIT BMI FLOATING CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector system terminated with 20 to 30 AWG wire using crimp technology
More informationConnector for Internal Serial Transmission FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-4 June 2013 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
More information3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationProduct Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
More information250 Tab-on type. 2.3 to 3.0 (.091 to.118) 2.8 to 3.8 (.110 to.150) Brass. 3.8 to 5.0 (.150 to.197)
250 ab-on type 5 (.250) 3.4(.134) 8.0(.315) isted 70188 Certified R20812 mm 2 AG # Dimensions SO-21-250N SO-21-250N SO-61-250N SO-61-250N SO-81-250N SO-81-250N *SO-62-250N 0.3 to 0.75 0.75 to 2.0 22 to
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationSealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
More information2. Use Extraction Tool (contact extraction tool). Insert releasing tip into the REAR of the. cavity between the spring and center wall of the
Twin Leaf PC Board Edge Connectors are designed for wire to pc board applications. To meet specific circuit requirements, housings are supplied (1) to be assembled using contacts, retaining springs, and
More informationSeries 110 MK III, Series 187 MK II and MK III, Series 250 MK II, MK III, and RAST 5 & 7
Series 110 MK III, Series 187 MK II and MK III, Series 250 MK II, MK III, and RAST 5 & 7 Application Specification 114-2074 13 JAN 17 Rev L All numerical values are in metric units [with U.S. customary
More informationAdam Technologies, Inc.
INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationWire. Socket (with polarizing guide) Wire can be connected without stripping cable insulation. IDC contacts. Rise in temperature ( C)
IDC Connectors for Discrete Wires Trouble-free discrete-wire termination with IDC Sockets that accommodate MIL Plugs. XG5 * Two-slot, IDC construction and insulation barrel offer high reliability and large-current
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationDynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
More informationSmall-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
More informationThrough Hole Connectors
Through Hole Connectors 43 Whether your Through-Hole Technology applications require a Quick Disconnect Tab, an Insulation Displacement Connector, a Test Point Terminal, a Screw Terminal, a Receptacle,
More informationECONOMY POWER 2.5 CONNECTORS
ECONOMY POWER 2.5 CONNECTORS The Economy Power 2.5 (EP 2.5) connector is a single row or dual row crimp connector system. Based on a 2.5mm (0.098 ) centerline pitch, it is a very compact solution. EP 2.5
More informationHigh Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
More informationHS1L Interlock Switches with Solenoid
HS1L Interlock Switches with Solenoid 3000N locking strength (largest in class)! * Suitable for large and heavy doors. Same actuator as HS1E (actuator retention force 3000N) Six contacts in a compact housing
More informationApplication Specification.062 Diameter Pin and Socket Contacts and Housings 21 MAR 11 Rev E
Application Specification.062 Diameter Pin and Socket 114-1013 Contacts and Housings 21 MAR 11 Rev E i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More informationPremium industrial grade isolated ground straight blade receptacles
Technical Data Description 2-Pole, 3-Wire Grounding 15A 125V; 15A 250V 20A 125V; 20A 250V NEMA 5-15, 5-20, 6-15, 6-20 IG5261 AHIG5362 Design features Exclusive screw terminal guards provide fast, easy
More informationJUL 14 Rev B
Power Triple Lock (PTL) Connector System Application Specification 4-068 2 JUL 4 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
More informationSpecifications A2001 SERIES. Standards E E326732
Specifications Current rating:2 C,DC Voltage rating:100v C,DC Temperature range:-40 C~+105 C Contact resistance:10m Max. Insulation resistance:1000m Min. Withstanding voltage:800v C/minute *Compliant with
More informationTH 025 CONNECTOR SERIES
TH 025 CONNECTOR SERIES for the Automotive Industry TE AUTOMOTIVE /// TH 025 CONNECTOR SERIES TH 025 CONNECTOR SERIES for the Automotive Industry High density in limited spaces Product Features n TH 025
More information0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
More informationPremium industrial grade straight blade receptacles
Technical Data Description 2-Pole, 3-Wire Grounding 15A 125V; 15A 250V 20A 125V; 20A 250V NEMA 5-15, 5-20, 6-15, 6-20 AH5262 AH5362 Design features Exclusive screw terminal guards provide fast, easy insulation
More informationKSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
More informationDIN WIRE APPLICATIONS Housings for wire applications are delivered without contacts. Contacts have to be ordered separately.
/Trim trio Description The PI 43 series is a 43 position two part plug and receptacle connector system designed to style C dimensions. It can be use in wire applications as well as in board applications
More informationLow Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
More informationAMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
More information2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
More informationOiltight Switches & Pilot Devices
Oiltight Emergency Stop Stations Part Numbers: Emergency Stop Stations Description Contacts Plastic Bezel Metal Bezel Ø 40mm Pushlock Turn Reset 1NO-1NC HW1X-BV411-R* HW4X-BV411-R* 2NC HW1X-BV402-R* HW4X-BV402-R*
More informationAPPLICATION SPECIFICATION
CRIMP TERMINAL 1.0 SCOPE This specification details the crimping information and common practices of general crimps for the Molex CTX50 Un-Sealed Receptacle Terminal. Please refer to sales drawing SD-560023-001
More informationPOWER TRIPLE LOCK* Connector System
POWER TRIPLE LOCK* Connector System Application Specification 114-106118 23 MAY 18 Rev J NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
More informationCoaxial Snap-Lock Connectors
Coaxial Snap-Lock Connectors Application Specification 114-13010 11 APR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSM. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSM Terminal Blocks Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Height: 15.2
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationStandard Timer Connectors
Standard Timer Connectors Application Specification 114-49003 22 FEB 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
More informationQuick Reference Guide 1.5 mm AMP Mini CT Connector Series
Quick Reference Guide The AMP Mini CT connectors are miniature wire-to-board and wire-to-wire connectors. Like the standard AMP CT connector series, these connectors are tailored for improved harness productivity
More information1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
More informationHigh speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
More informationMini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
More informationAug07 Rev A All Paragraphs Revised
Qualification Test Report Universal MATE-N-LOK* Connector 110-213 28Aug07 Rev A All Paragraphs Revised 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on Universal MATE-N-LOK* connectors
More informationGT16 Series. Subminiature Connectors for coaxial cables
GT5 Sep.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT16 Series Subminiature Connectors for coaxial cables
More informationQuick Reference Guide AMP CT Connector Series
Quick Reference Guide The AMP CT connectors are a miniature wire-to-board and wire-to-wire interconnect solution. The AMP CT connector series has proven performance in its harness making capability. A
More informationHi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
More informationHigh Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More informationMIL-DTL Nano D-sub Conectors
reliable requirement, it can meet light and miniaturize demand mated connector locked by screw and nut Standard: MIL-TL-339 The sectional area of crimp conductive cable is.35mm Undefined tolerance is±.3
More information3.5mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard)
3.mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard) MDF6 Series Inner type positive lock Features 1. Miniature type with 3.mm pitch A miniature, space-saving
More information151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
More informationWedge in Plugs Stock No
Amphenol Connectors Description Plugs Stock No. Receptacles Stock No. 2-way 38170 38171 3-way 38172 38173 4-way 38174 38175 6-way 38176 38177 8-way 38178 38179 12-way 38180 38181 Wedge in Plugs Stock No.
More informationVAL-U-LOK* Series Headers, Connectors, and TPA Accessories
VAL-U-LOK* Series Headers, Connectors, and TPA Accessories Application Specification 114-13172 30 NOV 17 Rev W1 NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationWire to Board Connectors - SMT Type CONNECTOR - Side Entry Part No.: MS242610R~MS242614R Suitable Contact: 2426PS PS-2RF:C 2426PS-2RF:E Suitable
Pitch Wire to Board Connectors - SMT Type C/DC 100V 2 Insulation Resistance: 1000M min. CONNECTOR - Top Entry Part No.: MS24262~MS242616 RF: Suitable Contact: 2426PS-2 2426PS-2RF:C 2426PS-2RF:E Note: Letters
More informationAPPLICATION SPECIFICATION
CRIMP TERMINAL 1.0 SCOPE This specification details the crimping information and common practices of general crimps for the Molex MX150 Wire Seal Blade Terminal. Please refer to sales drawing SD-34080-001
More informationEasy assembly with standard tools. Fully insulated for direct mounting to steel panels
Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series and Receptacles are the proven industry standard
More informationRMP SERIES INFORMATION GUIDE
RMP SERIES INFORMATION GUIDE DESCRIPTION & DESIGN FEATURES Applications RMP series connectors can be used wherever high amperage connection of AC or DC power is required. Typical applications are the connection
More information0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationBATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
More informationG7L. A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops. Application Examples. Model Number Legend
A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary drops up to % of rated. Wide-range AC-activated coil that handles 1 to 1 or to
More informationRoHS 2011/65/EU GREEN ELECTRONICS MSG. Terminal Blocks ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2011/65/EU e3 GREEN ELECTRONICS Terminal Blocks ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS TERMINAL BLOCKS Functional characteristics s 270
More informationPCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
More informationHigh Current, High Density, Power Connectors
High Current, High Density, Power Connectors MCN1 Series Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection
More information