250 Tab-on type. 2.3 to 3.0 (.091 to.118) 2.8 to 3.8 (.110 to.150) Brass. 3.8 to 5.0 (.150 to.197)

Transcription

1 250 ab-on type 5 (.250) 3.4(.134) 8.0(.315) isted Certified R20812 mm 2 AG # Dimensions SO N SO N SO N SO N SO N SO N *SO N 0.3 to to to to to 3.0 (.091 to.118) 2.8 to 3.8 (.110 to.150) 3.8 to to to 12 (.150 to.197) U1015#20 + U1015#20 U1015#18 + U1015#20 U1015#18 + U1015#18 in-plated in-plated in-plated in-plated 7.7 (.303) 7.6 (.299) 19.0 (.748) 19.0 (.748) 7.8 (.307) 8.0 (.315) 2.4 (.094) 1.6 (.063) 5 (.018) Note: erminal denoted by * is used only for two wires. If using wires in other combinations than the ones shown above, contact JS. 250 ab-on piggyback type isted Certified R20812 mm 2 AG # Dimensions SF N 0.75 to to to 3.9 (.110 to.154) in-plated 7.6 (.299) 8.3 (.327) 2.9 (.114) 0.39 (.015) 3,

2 250 ab-on flag type 5 (.250) 3.4(.134) 8.0(.315) isted Certified R20812 mm 2 AG # Dimensions SFO A SFO A 0.75 to to to 14 (.110 to.150) in-plated 8.0 (.315) 16.1 (.634) 7.8 (.307) 3.0 (.118) 5 (.018) 3, ab-on type 5.2 (.205) 3.2(.126) 5(.250) isted Certified R20812 mm 2 AG # Dimensions SO N SO N SO N-5 SO N to to to 3.0 (.091 to.118) in-plated in-plated 15.9 (.626) 0.7 (.028) 7, ab-on flag type 4.75 (.187) 3.2(.126) 5(.250) isted Certified R20812 mm 2 AG # Dimensions SFO N SFO N SFO N-8 SFO N-8 to 1.25 in-plated in-plated 12.3 (.484) 1.0 (.039) 896

3 187 ab-on type 4.75 (.187) 3.2(.126) 5(.250) isted SO N SO N SO N-8 SO N-8 SO N SO N SO N-8 SO N-8 *SO N *SO N Certified R20812 mm 2 AG # 0.2 to to to 20 U1015#20 + U1015#20 U1015#18 + U1015#20 U1015#18 + U1015#18 U1015#18 + U1015#18 U1015#18 + U1015#16 U1015#16 + U1015#16 to 2.6 (.059 to.102) in-plated in-plated in-plated in-plated in-plated in-plated 15.0 (.591) 15.0 (.591) Dimensions Note: erminal denoted by * is used only for two wires. lf using wires in other combinations than the ones shown above, contact JS. Q ty / 110 ab-on type 2.8 (.110) 5.7(.224) 7.3 (.287) isted Certified R20812 mm 2 AG # Dimensions SO N SO N SO N-8 SO N-8 SO N SO N SO N-8 SO N to to to to 2.8 (.083 to.110) in-plated in-plated in-plated in-plated 3.7 (.146) 3.7 (.146) 15.4 (.606) 15.4 (.606) 0.6 (.024) 0.6 (.024) 0.25 (.010) 897

4 Applicator for the semi-automatic press AP-K2N Contact Crimp applicator MK-/MKF--187/250 with safety cover without safety cover SFO-41()-187N AP SFO41-187N SC AP SFO41-187N SFO-61()-250A AP SFO61-250A SC AP SFO61-250A SF N APMK SF61-250N APNC SF61-250N SO-01()-110N(-8) APMK SO01-110N APNC SO01-110N SO-01()-187N(-8) APMK SO01-187N APNC SO01-187N SO-21()-205N(-5) APMK SO21-205N APNC SO21-205N SO-21()-250N APMK SO21-250N APNC SO21-250N SO-41()-110N(-8) APMK SO41-110N APNC SO41-110N SO-41()-187N(-8) APMK SO41-187N APNC SO41-187N SO-61()-250N APMK SO61-250N APNC SO61-250N SO N APMK SO62-187N APNC SO62-187N SO N APMK SO62-250N APNC SO62-250N SO-81()-250N APMK SO81-250N APNC SO81-250N SO N APMK SO82-187N APNC SO82-187N * Contact JS if ead-free product is required. * Refer to "General Instruction and Notice when using erminals and Connectors" at the end of this catalog. * Contact JS for details. 898

5 AB-ON-AB RMINA 250 ab-on type isted Dimensions mm 2 AG # ab SOM SOM to to to 3.8 (.102 to.150) in-plated 2 (.819) 11.6 (.457) 187 ab-on type isted Dimensions mm 2 AG # ab SOM SOM to to to 3.0 (.091 to.118) in-plated 4.8 (.189) 17.2 (.677) Applicator for the semi-automatic press AP-K2N Contact Crimp applicator MK- with safety cover without safety cover SOM-21()-187 APMK SOM APNC SOM SOM-51()-250 APMK SOM APNC SOM * Contact JS if ead-free product is required. * Refer to "General Instruction and Notice when using erminals and Connectors" at the end of this catalog. * Contact JS for details. 899

6 AB-IN/AB-IN-AB RMINA 250 ab-in type mm 2 AG # Dimensions SI N SI N to to to 3.8 (.102 to.150) in-plated 7.5 (.295) 19.2 (.756) 7.7 (.303) 0.9 (.035) SIM-51 ()-250N Note: 1. Combine a plated -in terminal with a plated and a non-plated -in terminal with a non-plated. 2. his terminal must be built into the model 250 -in housing which has numerous circuits, and it cannot be used independently. Model 250 -on terminals, however, can be used independently. 110 ab-in type SI N SI N SI N SI N mm 2 AG # 0.3 to to to to 2.8 (.083 to.110) in-plated in-plated 3.7 (.146) 15.3 (.602) Dimensions 0.7 (.028) 0.25 (.010) SIM-01 ()-110A SIM-41 ()-110B Note: 1. Combine a plated -in terminal with a plated and a non-plated -in terminal with a non-plated. 2. his terminal must be built into the model 110 -in housing which has numerous circuits, and it cannot be used independently. Model 110 -on terminals, however, can be used independently. 900

7 AB-IN/AB-IN-AB RMINA 250 ab-in type Dimensions mm 2 AG # ab SIM SIM SIM N SIM N 0.3 to 0.75 to to to to 3.2 (.087 to.126) 2.6 to 3.8 (.102 to.150) in-plated in-plated 6.0 (.236) 6.0 (.236) 28.0 (1.102) 24.5 (.965) 15.8 (.622) 13.0 (.512) 4 (.033) Note: SIM-21 differs from SIM-51 in terminal size. 110 ab-in type isted Dimensions mm 2 AG # ab SIM A SIM A SIM B SIM B 0.3 to to to to 2.8 (.083 to.110) in-plated in-plated 2.8 (.110) 20.6 (.811) 12.0 (.472) 7,500 Applicator for the semi-automatic press AP-K2N Contact Crimp applicator MK- with safety cover without safety cover SI-01()-110N APMK SI01-110N APNC SI01-110N SI-41()-110N APMK SI41-110N APNC SI41-110N SI-51()-250N APMK SI51-250N APNC SI51-250N SIM-01()-110A APMK SIM01-110A APNC SIM01-110A SIM-21()-250 APMK SIM APNC SIM SIM-41()-110B APMK SIM41-110B APNC SIM41-110B SIM-51()-250N APMK SIM51-250N APNC SIM51-250N * Refer to "General Instruction and Notice when using erminals and Connectors" at the end of this catalog. * Contact JS for details. 901