Product Tips and Features
|
|
- Godwin Lang
- 6 years ago
- Views:
Transcription
1 /2002. Manifolds & Valve acks roduct ips and Features apping lates apping lates are sandwich adapters designed to provide a means to easily take pressure readings from the work ports. 1. Standard materials are luminum and Ductile Iron. Other materials including Mild Steel or Stainless Steel are optionally available. 2. Special Finishes including lack Oxide, Electroless Nickel lating or nodizing are optionally available. 3. Clearance holes are designed to accommodate either UNC or Metric interface fasteners. 4. Standard Connection oints are &, &, &, and & for all solenoid interfaces up to D08 size. 5. Standard Connection oints for,, & ports are available for D07, D08 & D10 sizes. D05 size is available on request. 6. Nominal ¼ Connection oints for test points as shown are Standard. Larger port sizes for higher flows are available on request. 7. Viton O rings and locating pins are supplied as standard. 8. apping lates for Servo Valves are available. lease contact Factory for art Numbers. 9. Special apping lates can be ordered for external pressure connections from a secondary pressure source. lease contact factory for art Number and availability. 44
2 Manifolds & Valve acks Index /2009. apping lates D02 apping lates D03 apping lates D05 apping lates D05H apping lates D05HE apping lates D07 apping lates D08 apping lates D07, D08 & D10,, & apping lates est oints Oversized orts (Full Flow)...Consult Factory Servo Interfaces apping lates...consult Factory 2 Speed Sandwich apping lates...consult Factory 45
3 /2016. Manifolds & Valve acks D02 apping lates Circuit -"XX" Circuit -"XX" _02GXXS S/N _02GXXS 0.97 S/N Mounting kit includes: O-ring viton 1 - pin Mounting kit includes: O-ring viton 1 - pin Circuit -"XX" Circuit -"XX" _02GXXS S/N 0.97 _02GXXS S/N Mounting kit includes: O-ring viton 1 - pin Mounting kit includes: O-ring viton 1 - pin R NUMER SYSEM luminum D02 apping late with SE 4 Gauge orts on & Example : 02GXXS YE MERIL INERFCE CONNECION OINS GUGE OR apping late 02G ISO ORS YE SIZE hru Holes NF D02 XX & S SE 4 XX & N NF 1/4" luminum XX & S 1/4" D Ductile Iron XX & S 1/4" M Metric M10 46
4 Manifolds & Valve acks D03 apping lates /2002. R NUMER SYSEM luminum D03 apping late with SE 4 Gauge orts on & Example : 03GXXS YE MERIL INERFCE CONNECION OINS GUGE OR apping late 03G ISO ORS YE SIZE hru Holes NF D03 XX & S SE 4 XX & N NF 1/4" luminum XX & S 1/4" D Ductile Iron XX & S 1/4" M Metric M10 47
5 /2002. Manifolds & Valve acks D05 apping lates R NUMER SYSEM luminum D05 apping late with SE 4 Gauge orts on & Example : 05GXXS YE MERIL INERFCE CONNECION OINS GUGE OR apping late 05G ISO ORS YE SIZE hru Holes NF D05 XX & S SE 4 XX & N NF 1/4" luminum XX & S 1/4" D Ductile Iron XX & S 1/4" M Metric M10 48
6 Manifolds & Valve acks D05H apping lates /2002. R NUMER SYSEM luminum D05H apping late with SE 4 Gauge orts on & Example : 05HXXS YE MERIL INERFCE CONNECION OINS GUGE OR apping late 05H (US Standard) ORS YE SIZE hru Holes NF D05 lt XX & S SE 4 XX & N NF 1/4" luminum XX & S 1/4" D Ductile Iron XX & S 1/4" M Metric M10 49
7 /2002. Manifolds & Valve acks D05HE apping lates R NUMER SYSEM luminum D05HE apping late with SE 4 Gauge orts on & Example : 05EXXS YE MERIL INERFCE CONNECION OINS GUGE OR apping late 05E ISO ORS YE SIZE hru Holes NF D05 lt XX & S SE 4 XX & N NF 1/4" luminum XX & S 1/4" D Ductile Iron XX & S 1/4" M Metric M10 50
8 Manifolds & Valve acks D07 apping lates (Non referred Models) For referred Models - See for Circuit /2010.C R NUMER SYSEM luminum D07 apping late with SE 4 Gauge orts on & Example : 07GXXS YE MERIL INERFCE CONNECION OINS GUGE OR apping late 07G ISO ORS YE SIZE hru Holes NF D07 XX & S SE 4 XX & N NF 1/4" luminum XX & S 1/4" D Ductile Iron XX & S 1/4",, & M Metric M10 51
9 /2010.C Manifolds & Valve acks D08 apping lates (Non referred Models) For referred Models - See for Circuit R NUMER SYSEM luminum D08 apping late with SE 4 Gauge orts on & Example : 08GXXS YE MERIL INERFCE CONNECION OINS GUGE OR apping late 08G ISO ORS YE SIZE hru Holes NF D08 XX & S SE 4 XX & N NF 1/4" luminum XX & S 1/4" D Ductile Iron XX & S 1/4",, & M Metric M10 52
10 Manifolds & Valve acks D07, D08 & D10 -,, & apping lates /2009. R NUMER SYSEM luminum D10 apping late with SE 4 Gauge orts on,, & Example : 10GS YE MERIL INERFCE CONNECION OINS GUGE OR apping late 07G ISO ORS YE SIZE hru Holes NF D07,, & S SE 4 ISO N NF 1/4" 08G luminum NF D08 S 1/4" D Ductile Iron 10G ISO S 1/4" NF D10 M Metric M10 53
11 /2010.C Manifolds & Valve acks Non Standard Options Oversized orts, External Feed and/or Custom Height o order a non-standard apping late, make one selection from each column. Note: not all combinations are possible. Contact factory to confirm your selection. NON-SNDRD EXMLE D05 D.I. apping late with SE 6 orts on &, 2.00 high: D05GXXSC200 YE MERIL CONNECION GUGE OR S CUSOM HEIGH INERFCE OINS I N G L E Standard Options luminum D Ductile Non-Standard Options S Steel Stainless Steel Stainless Steel Stainless Steel Directional Valves NF ISO G D G D G D H D05H - 05E D05HE G D G D G D Servo Valves ISO S Size 01 02S Size 02 03S Size 03 04S Size 04 06S Size 06 XX XX XX XX ORS & & & & & & & & orts XX Opposite Face o Standard XX Design XXX XXX XXX XXX XX XX Only Only Only Only & & N N NC S SC SD SE SF SH SI C D F NF 1/8 NF 1/4 NF 3/8 NF SE SE 4 SE 6 SE 8 SE 10 SE 12 SE 16 SE 20 S S 1/4 S 3/8 S 1/2 S 3/4 E YE ll hrough Galleries External Feed ### HEIGH #.## Other custom heights are available on request. H S 1 I S 1 1/4 S S 1/4 M MERIC ISO 6149 M10X1.5 03GXXXSDE172 05GXXXSEE147 07GSC147 08GXXSF est oints SE hread G H Hex art Numbers Dimensions in inches #4 SE #6 SE 7/16 UNF MMHY /16 UNF MMHY
Product Tips and Features
5.00.01 anifolds & Valve Packs Product Tips and Features Circuits Relief from P to T are designed to provide a means to connect a single solenoid valve to field piping either on the power unit or near
More informationProduct Tips and Features
6.00.01 anifolds & Valve Packs Product Tips and Features Cover Plates Cover Plates are used in place of directional valves to either completely block off a bar manifold station, or to provide a means of
More informationD03 Standard Flow Parallel Circuit Manifold
1.02.01 anifolds & Valve acks D03 Standard Flow arallel Circuit anifold (See 1.99.01 for Relief Cartridges) 2 No. of Stations 1 1* 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Dim. "L",2.13" spacing 2.13 3.25
More informationMounting and Assembly of Sandwich Bodies
Mounting and ssembly of Sandwich odies Mounting of ISO 0 (CEO ) Sandwiches Many of Sun s ISO 0 (CEO ) sandwich bodies are designed for multi-functional use to permit maximum circuit flexibility. With the
More informationRPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.
REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding
More informationAccessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.
Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical
More informationSection 6 Pump Manifolds
Industrial Hydraulics Electric Drives and Controls inear Motion and Assembly Technologies neumatics Service Automation Mobile Hydraulics Section 6 ump Manifolds RA 09 907/07.04 The Drive & Control Company
More informationSandwich Bodies TECHNICAL PRODUCT INFORMATION
Sun offers sandwich and subplate mounted bodies for most of its cartridge functions. hese mounting configurations are complete circuit elements that mount under directional control valves. Similar to other
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More information油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
More informationAppendix ISO /03/05/07/08
ppendix ISO4401 02/03/05/07/08 Fluid Recommendations Viscosity & Cleanliness Recommendation Minimum Optimum Maximum ISO Cleanliness 6.0 cst 20 43 cst 2158 cst 20/18/15 (45 SUS) (100-200 SUS) (10000 SUS)
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationDIRECTIONAL CONTROLS. Pilot Operated Directional Valves. Specifications
ilot Operated Directional s DIRECIONL CONROLS hese valves perform a change over of spool by hydraulic pilot and shift the direction of oil flow. EIC-E-04-0 Specifications Model Numbers Maximum Flow L/min.
More informationEManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationIFP MRV03 RELIEF VALVE MODULE
IF MRV03 RELIEF VLVE MODULE ISO4401-03 SIZE/NF D03 DJUSLE SNDRD MICROMEER KNO EXREMELY CISE CONROL WO SGE LNCE ISON FOUR RNGES VILLE LOW OVERRIDE MRV-03- MRV-03-W MRV-03- MRV-03- RELIEF MODULR VLVE SIZE
More informationGENERAL PURPOSE. Rotary Union Solutions. Series FLOW PASSAGE OPTIONS
GENERAL UROSE Rotary Union Solutions G Series FLOW ASSAGE OTIONS 2 8 3 4 6 10 12 Rotary Union Solutions G Contents About DSTI 3 What is a Rotary Union? 4 G Series Overview 5 How To Order 7 Specifi cations
More informationISO 05 SANDWICH BODIES
ISO 5 SNDWICH ODIES luminum rated to 3 psi and Ductile Iron rated to 5 psi. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION 3..81 to 1
More informationSeries RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP3 up to cm 3 (6. inch 3 ) p max 32 bar (46 PSI) Speed from 35 to 32 RPM Technical Features Operating pressure 29 bar, Peak pressure 32 bar High-strength quality aluminum
More informationHIGH FLOW SOLENOID VALVES
P PRODUCT ROCHURE HIGH FLOW SOLENOID VLVES HIGH FLOW IN COMPCT DESIGN TLE OF CONTENTS High Flow Solenoid Valves 9 How to ccessorize Product Features 9 ase Plate Options and ccessories Features and enefits
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationBar 35 PSI 500. Pressure Drop L/M GPM. Flow
NF D3 O E R I N G N D E C H N I C L D RINGS Maximum Flow... See Chart Maximum Operating ressure (, and orts)... 3 ar ( SI) Maximum ank Line ressure... 13 ar (1 SI) Mounting attern... ISO 441--3-4-, NF-D3
More informationGenesis Series Valves Parts List / Service Instructions
Genesis Series Valves Parts List / Service Instructions INDEX PAGE General Warnings and Cautions......................................................... 2 Model Number Index...................................................................
More informationSeries RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
More informationSeries Shockless Type Solenoid Controlled Pilot Operated Directional Valves
Solenoid Controlled ilot Operated Directional Valves Electronic Circuit X Specifications Descriptions G-DSHG-4-3C - - - -/9 G-DSHG-6-3C - - - -/9 Max. Flow /min (U.S.GM) 16 (4.3) (66.1) 1 1 Max. Operating
More informationMax. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting
Remote ontrol Relief Valves his valve is used as a remote control valve for pilot operated type pressure control valves. EI--1-0 Graphic Symbol Specifications hreaded onnection Designation F- YB -01 -F
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP3 up to 1 cm 3 (6.1 inch 3 ) p max 3 (46 PSI) Speed from 35 to 32 RPM Technical Features Operating pressure 29 bar, Peak pressure 3 High-strength quality aluminum alloys
More informationD03, D05 & D08 SERIES
INDUSRIL FLUID OWER COMONENS ND SYSEMS D03, D05 & D08 SERIES D03-DC1-70 D05-SQ1--1K D08-R1--3K 31341 Friendship Drive, Magnolia, X 77355 el.: 281-259-7768 Fax: 281-259-7249 www.hyvair.com Features 1. Rugged
More informationISO 05 SANDWICH BODIES
ISO 5 SNDWICH ODIES luminum rated to 3 psi and Ductile Iron rated to 5 psi. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION 3. 1. ir leed
More informationValve Products Viking Lite Valves
atalog 0697- arker neumatic alve roducts iking ite alves The iking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or /8
More informationModel Model Model Model Back to Back. Medium Pressure Piston Pump Variable Displacement Closed Circuit
Medium Pressure Piston Pump Variable Displacement Closed Circuit Model 76 2.3 cm 3 /r [.24 in 3 /r] 23.6 cm 3 /r [.44 in 3 /r] Model 736 4.6 cm 3 /r [2.48 in 3 /r] 49.2 cm 3 /r [3. in 3 /r] Model 724 4.6
More informationEMechanically Operated Directional Valves
E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Manual operator Solenoid Individual mounting Sub-base non Sub-base Manifold mounting Manifold base Sub-base/ manifold base non with latching solenoid
More informationPilot Operated Directional Valves
ilot Operated Directional Valves Catalog DG3V-8; 7 l/min (185 USgpm) 35 bar (5 psi) DG5V-8; 7 l/min (185 USgpm) 35 bar (5 psi) NF D8, ISO-441-8, CEO 8 Introduction General Description he Size 8 Directiona
More informationElectric Proportional Pressure Reducing Valves Series ERP 03.ERP
Electric roportional ressure Reducing Valves Series ER 03.ER - 0912 Electric proportional pressure reducing valves SERIES ER Index of content: Description and main features: age 3 echnical data: age 4
More informationSize 06 (D03) Q max 100 l/min (26.4 GPM) p max 250 bar (4600 PSI) RPE*-06 PRM*-06
Modular Load Sensing System MLS3-06 Size 06 (D03) Q max 00 l/min (26.4 GM) p max 250 bar (4600 SI) ossible Applications riority module riority module 2 ase module Section module REK distributors Section
More informationHousings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
More informationD I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
More informationB8_58 (EDBZ-VEI) RE Edition: Replaces:
4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:
More informationModular Hydro-Pneumatic Suspension System Improving Suspension Performance with a Proper Setup: Quicker and Better Adaptation to Applications
MHS Modular Hydro-neumatic Suspension System Improving Suspension erformance with a roper Setup: Quicker and etter Adaptation to Applications echnical Features p max up to 20 bar (3600 SI) Reduces vibrations
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationPRESSURE SWITCH 1PS / 1PF / 1PT
RESSURE SWICH 1S / 1F / 1 Ref. No. 98 Release 7/2 1 Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available,
More informationEManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -
More informationValve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
More informationSECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES
SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he
More informationRelief Valves 24,6. T 10A Cavity Locating Shoulder Depth 0,8 .25 NPTF CBE CBE/S.25 BSPP CBE/M CBE/T. Relief Valves 49,3 25,1 27,2
ISO 5 SNDWICH ODIES luminium rated to 1 bar and S Iron rated to 35 bar. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION to 4,6 4,6 3,
More informationPART LIST P T O P T O S E R I E S S E R I E S
PART LIST P T O 1 0 0 0 S E R I E S P T O 2 0 0 0 S E R I E S Bezares U.S.A. PART LIST & TABLE 1 Nov. 2017 Bezares U.S.A. PART LIST & TABLE 2 Nov. 2017 PTO 1000 & 1010 Series SAE B 2/4 Bolt PART 1 4 Screw
More informationDirectional Control Valves
echnical Information General Description he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available
More informationBST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol.
Specifications hreaded Connection Mounting BS-- - - - -47 BS-06- - - - -47 BS-0- - - - -47 BSG-- - - - -47 BSG-06- - - - -47 BSG-0- - - - -47 BS / BSG- / 06 / 0 hreaded Connections / Mounting Specifications
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
More informationDirectional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
More informationMARK 8 SERIES. direct solenoid actuated valves MARK 8
SERIES direct solenoid actuated valves M a r k 8 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T E C H N I C L D T................................................... 3 V L V E S M O D E L S E
More informationRelief Valves 43,2 21,6. T 10A Cavity Locating Shoulder 1,3 Depth 0,8 .25 NPTF FBP FBP/S.25 BSPP FBP/M FBP/T
ISO 3 SNDWICH ODIES luminium rated to bar and S Iron rated to 35 bar. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. 3 x y X Y Model Code List
More informationDirectional Controls
Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10
More information4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
More informationDifferential Lock Valve
Differential Lock Valve Series M..DV (for 2 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion
More informationDirectional control - SRK series Solenoid valve
Directional control - series valve valve - 500, 700 Provide CD external dimension. SM SM SMU SMU Small size, big flow rate! high speed, react quickly ; ( Under 10 ms ) with indicator light and voltage
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main
More information4 Flow Control Valves. Notes
Flow Control alves Content Flow Control alves Notes Example Flow l/min (GM) ressure bar (I) Code Cartridge ize ; D ize ; D ize ; D Line Mounted age Data heet Needle - Restrictor alves and alves with Reverse
More informationHV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control
INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:
More informationD-sub Connector. Cassette base manifold SV1000/SV2000 Tie-rod base manifold SV1000/SV2000/SV3000/SV4000
D-sub Connector J Tie-rod base Cassette base pplicable series Cassette base manifold 000/000 Tie-rod base manifold 000/000//000 Number of connectors: pins MIL-C-08 Conforming to JIS-X-0 --6 For details
More informationAir Valve AIR-PILOTED VALVES
K-UV002 Ver.1.0 ir Valve I-ILOTED VLVES INSTUCTI MNUL Ver.1.0 ir-piloted Valves Features Since the unit requires air piping only, with no need for electrical wiring, it can be handled by a person without
More informationThese valves may be used to manually shift the spool position and change the direction of oil flow *2 1.8
DIRCINL CNRLS Manually perated Directional s hese valves may be used to manually shift the spool position and change the direction of oil flow. IC--1005-0 Specifications Numbers DMG-01-C -10 DMG-01-D -10
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More information5 Port Solenoid Valve. High speed response type) Series. Body ported VQZ1 2 VQZ2 2 VQZ3 2 VQZ1 5 VQZ2 5 VQZ3 5. Base mounted
Metal Seal ort Solenoid Valve Series // Rubber Seal.. ower consumption:. W/. W Compact, High Flow Series Valve width (mm) (Standard) (High pressure type, High speed response type) ody ported ase mounted
More informationIsys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
More informationAccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173
T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,
More information18D according to ATEX
Pneumatic ressure switch -... bar Hydraulic ressure switch 5... 4 bar For EX-alications according to ATEX 00 a: Zone 2 category ATEX 3G (gases) Zone 22 category ATEX 3D (dust) TÜV (technical insection
More informationHydraulic Power Units
Catalog HY13-1552-001/N,EU Vertical ower Units Volume Control Hydraulic ower Units D, H and V-ak Series Catalog 2600-500-1/US 15 arker Hannifin Corporation Hydraulic ump/motor Division Greeneville, ennessee
More information"G" SERIES SHOCKLESS TYPE SOLENOID OPERATED DIRECTIONAL VALVES G-DSG-01/03 (1/8, 3/8) "G" SERIES SHOCKLESS TYPE
"G" SRIS SHOCKLSS Y NOID ORD DIRCIL VLVS G-DSG-1/3 (1/, 3/) "G" SRIS SHOCKLSS Y NOID CROLLD ILO ORD DIRCIL VLVS G-DSHG-/ (1/, 3/) Mounting Up to 5 Ma (33 SI), 5 L /m in (.1 U.S.GM) ub. C-5 DIRCIL CROLS
More information82610/ /2-way seat valves
> > ort size: DN 1,5... 5, 1/8... 3/8 (ISO G/NT) > > Suitable for vacuum > > High flow rate > > Functional compact design > > Solenoid interchangeable without tools (c) > > Valve operates without pressure
More informationDirectional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which
More informationYour Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
More informationMACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:
ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationBankable Control Valves
Hydraulics ankable Control Valves Catalog 3123/US Catalog 3123/US Contents ankable Control Valves WRNING FILURE OR IMROER SELECION OR IMROER USE OF HE RODUCS ND/OR SYSEMS DESCRIED HEREIN OR RELED IEMS
More informationDirectional Control Valves. General Description. Features. Specifications
Technical Information General Description directional control valves are high-performance, 4-chamber, direct operated, wet armature, solenoid controlled, 3 or 4-way valves. They are available in 2 or 3-position
More informationPRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS.
PRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS. TABLE OF CONTENTS 3 Compact Hydraulic 4 Product Features 4 Features and Benefits 5 How to Order 6
More informationCatalogue 7 STAUFF Test
est Couplings est daptors est Hoses and Connectors Catalogue 7 SUFF est Introduction Introduction 4-11 est Couplings 12-53 est daptors 54-59 B est Hoses and Connectors 60-71 C echnical ppendix 72-77 D
More information4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
More informationPulley pitch range. Pulley pitch range - Overview. Pulleys and Components. Selftracking Series. Standard Pulley ATL-Series. T-Series.
Pulley pitch range Pulley pitch range - Overview AN-Series A-Series AN 10 AN 12.7 AN 20 Selftracking SFA-Series SFA 10 SFA 15 SFA 20 A 3 A 5 A 10 A(S) 15 A 20 HD/SD-Series HD 3M*) HD 5M*) HD 8M*) HD 14M*)
More informationYOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
More informationDifferential Lock Valve
Differential Lock Valve Series M..DVD (for 3 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion
More information250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
More informationPressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
More informationThread Milling Tool GWF
Thread Milling Tool GWF Thread milling >Ø20 mm Spiral flued solid carbide ools, some wih face cuer and fron chamfer This offers he following main advanages compared o he convenional mehods of apping and
More informationDirect Operated Type Solenoid Operated Proportional Throttle Valve
Direct Operated ype Solenoid Operated roportional hrottle Valve EM-G EM-G3 EM-G3-X EMS-2 EMS-2 EM-G4 b X EMS-3 Features hese proportional throttle directional control valves perform spool position feedback
More informationMiniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
More informationINDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
More informationHydraulic gear pumps and motors
PL 01 T E DISPLCEMENTS From 0.07 in 3 /rev (1.07 cm 3 /rev) To 5.56 in 3 /rev (91.10 cm 3 /rev) Hydraulic gear pumps and motors through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
More informationViking Lite Series Valves Air Control Valves
atalog 0697 arker neumatic Viking ite Series Valves ir ontrol Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose
More informationHydraulic Power Units
Hydraulic ower Units D, H and V-ak Series Catalog 26-5-1/US Introduction Vertical ower Units Series D, H, V-aks Quick Reference Data Chart ump ank Size ump Flow Electrical Maximum * Model No. allon (Liters)
More informationHigh Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H05 5 gpm (19 L/min) nominal 8000 psi (560 bar) Sliding-spool H05 valves provide true four-way control in a simple
More informationResilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
More informationHeavy Duty Bench Top Presses
Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown
More information