Cam width 58 Short Stroke

Size: px

Start display at page:

Download "Cam width 58 Short Stroke"

Andrew Hall
6 years ago
Views:

1.kN Cam width Short Stroke 697 Order Working force [ kn (tonf) ] Grade 1,000,000 1,000,000 0,000 strokes strokes strokes Standard Center Center Sky 18.6(1.9) 27.9(2.8) 37.2(3.

1 1.kN Cam width Short Stroke 697 Order Working force [ kn (tonf) ] Grade 1,000,000 1,000,000 0,000 strokes strokes strokes Standard Center Center Sky 18.6(1.9) 27.9(2.8) 37.2(3.8) Option Option Code SC WC NF K Specification Extend the mounting surface forward from 1 to 60 mm (at increments of 1 mm). Except. The mounting surface width is extended to 64 mm. Except. Nitrogen gas not filled into gas spring. Key attached. For key specification, refer to page 90. ( The key is not assembled into cam unit at delivery. ) Catalog No. W o K o Spring Option VACSS o o ISO VACYS o o NGK o SC4oWC64 VACPS o o GK o NFoWC64oK q Spring force & Return force t Coil spring specification Sky, Yellow, Pink Spring forcee Angle Initial load Final load Return force N kgf N kgf N kgf Stroke Catalog No. VACSS Yellow 28.4(2.9) 42.6(4.3) 6.8(.8) VACYS Short Pink 34.3(3.) 1.(.2) 68.6(7.0) VACPS 1.(.2) 68.6(7.0) o VACBS Cam width W Can be used with increased working force for 1,000,000-strokes and 0,000-strokes durability under the specified conditions. (These usage conditions are given on page 7.) Angle K 00n80 (-degree increments) Spring Type ISO GK NGK GD NGD GS NGS ISO : Coil spring GK : Gas spring (KALLER) GD : Gas spring (DADCO) GS : Gas spring (SDT) NGK, NGD, NGS: without gas spring Only gas spring specification is available for. t Gas spring specification Sky Yellow, Pink, Spring forcee Spring forcee Return force Angle Final load Final load Return force N kgf N kgf N kgf N kgf q Cam Stroke Angle Stroke mm q Rear removal space t Coil spring Angle L mm q Weight Angle Total weight kg Cam slider weight kg Tool Installation Weight kg Note 1: The above numbers are for when there is no SC/WC option. When there is an SC/WC option, decrease the tool installation weight by the amount of the slider weight increase. Note 2: The tool installation weights are rough yardsticks. The appropriate tool installation weight varies with the press speed, but it is recommended to stay within the numeric ranges above. t Gas spring Angle L mm

2 1.kN Cam width Short Stroke VACSS-00 VACYS-00 VACPS-00 VACBS-00 VACSS-0 VACYS-0 VACPS-0 VACBS-0 4.a0.0 12a a C a0.0 12a a C a a a a Refer to page 92 for the parts list. Refer to page 92 for the parts list. 0

3 1.kN Cam width Short Stroke VACSS - VACYS - VACPS - VACBS - VACSS - VACYS - VACPS - VACBS - 4. a a a C a0.0 12a a C a a a a Refer to page 92 for the parts list. Refer to page 92 for the parts list. 2

4 0 1.kN Cam width Short Stroke VACSS -20 VACYS -20 VACPS -20 VACBS -20 VACSS -2 VACYS -2 VACPS -2 VACBS -2 12a a a C a a a C a a a a Refer to page 92 for the parts list. Refer to page 92 for the parts list. 4

5 1.kN Cam width Short Stroke VACSS - VACYS - VACPS - VACBS - VACSS -3 VACYS -3 VACPS -3 VACBS a0.0 12a a C a a a C a a a a0.02 Refer to page 92 for the parts list. Refer to page 92 for the parts list. 6

6 1.kN Cam width Short Stroke VACSS -40 VACYS -40 VACPS -40 VACBS -40 VACSS -4 VACYS -4 VACPS -4 VACBS a0.0 12a a C a0.0 12a a C a a a a Refer to page 92 for the parts list. Refer to page 92 for the parts list. 8

7 1.kN Cam width Short Stroke VACSS -0 VACYS -0 VACPS -0 VACBS -0 VACSS - VACYS - VACPS - VACBS - 4.a0.0 12a a C a0.0 12a a C a a Refer to page 92 for the parts list. 11 a a0.02 Refer to page 92 for the parts list. 7

8 1.kN Cam width Short Stroke VACSS -60 VACYS -60 VACPS -60 VACBS -60 VACSS -6 VACYS -6 VACPS -6 VACBS -6 4.a0.0 12a a C a a a C a a Do not use as datum point 11a a Do not use as datum point 711 Refer to page 92 for the parts list. Refer to page 92 for the parts list. 712

9 1.kN Cam width Short Stroke VACSS - VACYS - VACPS - VACBS - VACSS -7 VACYS -7 VACPS -7 VACBS -7 4.a a a C 18 4.a a a C a a Do not use as datum point Refer to page 92 for the parts list. 11a a Do not use as datum point Refer to page 92 for the parts list. 714

10 kN Cam width Short Stroke VACSS -80 VACYS -80 VACPS -80 VACBS a a a0.0 2-C Do not use as datum point 11a a Refer to page 92 for the parts list. 716

Cam width 72 Long Stroke

Cam width 72 Long Stroke 71 Order Working force [ kn (tonf) ] Grade 1,000,000 1,000,000 0,000 strokes strokes strokes Standard Center Center Sky 24.(2.) 36.8(3.7) 49.0(.0) Catalog No. W o K o Spring o Option VACSL o o ISO VACYL