NAMUR Technical details
|
|
- Leona Singleton
- 5 years ago
- Views:
Transcription
1 Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C C Filtered, oil-free and dried compressed air according to ISO 87-1:010, Class 7::4, instrument air, free of aggressive additives. Alternatively the pressure dew point must be at least 10 C below lowest occurring ambient temperature. Materials Body: Al (adized), plastic, seals: NBR, inner parts: Al, steel and plastic IP 6 according to EN 609 Valves in accordance with 014/4/EU (ATEX) available. (Chapter 1) Electrically operated spool valve. The manual override is detent and is operated by screw driver. The model KN- has a coil with enhanced humitidy resistance and a additional gasket at the coil. The location pin, screws and seals are included. /-way-valves /- and /-way-valves 1 1 KN-0-10-HN-xxx KN--10-HN-xxx /-way, single soleid, air spring return, NC KN-0-11-HN-xxx KN--11-HN-xxx /-way, single soleid, mechanical spring return, NC KN-0-10-HN-xxx KN--10-HN-xxx /-way, single soleid, air spring return KN-0-11-HN-xxx KN--11-HN-xxx /-way, single soleid, mechanical spring return KN-0-0-HN-xxx KN--0-HN-xxx /-way, double soleid KN-0-0-HN-xxx KN--0-HN-xxx /-way, center position closed Please complete: xxx = electrical option KN-0--HN-xxx KN---HN-xxx /-way, center position exhausted Electrical options -xxx Nominal voltage Power consumption Specifics Plug connection *1 KN-0 KN- V DC 4. W Form B industrial rm V DC. W max. 8 bar Form B industrial rm V DC 4. W Form B industrial rm V DC 4.8 W M -O4-4 V DC. W max. 8 bar Form B industrial rm V DC. W max. 8 bar M -O6-4 V AC 7/4 VA Form B industrial rm V AC 7/4 VA Form B industrial rm V AC 7/4 VA Form B industrial rm * 1 Plug socket t included, suitable plug sockets see page. Subject to change 01
2 Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical data Model-.: KN-0-10 KN--10 KN-0-11 KN--11 KN-0-10 KN--10 KN-0-11 KN--11 KN-0-0 KN--0 KN-0-0 KN--0 Operating pressure* (bar) Pilot pressure* (bar) Flow rate (Nl/min) Response time (ms) at 6 bar on: 16 off: 18 on: 1 off: 16 on: 16 off: 17 on: 16 off: 18 on: 14 off: 14 on: 14 off: 16 Weight (kg) Dimensions * max. 8 bar at. W and. W KN-0- KN-- on: 14 off: 16 M HN. KN-0-1x-HN, MO HN KN--1x-HN Ø M HN. KN-0-1x-HN, MO HN KN--1x-HN KN-0-0-HN, KN--0-HN, KN-0-x-HN, KN--x-HN Ø = pressure inlet,4 = outlets, = exhausts Plug socket (t included in scope of delivery) can be repositioned by 180. Soleid coil can be repositioned by 4 x Subject to change
3 Valves > electrically valves > operated electrically valves operatede > accessories valves > Plug sockets Form B according to DIN EN Contact distance mm 10 mm P + E IP 6 according to EN 609 requires a flat gasket Model-.: Voltage (AC/DC) Status indicator Protective circuit Connecting cable Wire cross section Ø Connecting cable 0-0 V without max. 1. mm² 6-8 mm 8-ST-01-G Form B industrial rm Contact distance mm 11 mm P + E IP 6 according to EN 609 requires a flat gasket M-04, M-0, M-07, M-, KM-09, KM-10, MS-18, KN-0, MN-06, MI-01, MI-0, MI-0 Model-.: 8-ST-01 8-ST ST ST ST ST-06-K-1* 8-ST-06-K-7* Voltage (AC/DC) 0-0 V 10-0 V 70-0 V 4 V 0 V 4 V 0 V Status indicator yes yes yes yes yes yes Protective circuit yes (varistor) yes (varistor) yes (varistor) yes (varistor) Connecting cable without without without without without m m Wire cross section max. 1. mm² max. 1. mm² max. 1. mm² max. 1. mm² max. 1. mm² x 0.7 mm² x 0.7 mm² Ø Connecting cable 6-8 mm 6-8 mm 6-8 mm 6-8 mm 6-8 mm * These plug sockets are fitted with integrated flat gaskets. Dimensions Form B according to DIN EN Form B industrial rm M M Subject to change 0
4 valves Valves > electrically operatede valves > > spare parts > Soleid coils Form B according to DIN EN mm Contact distance 10 mm P + E IP 6 according to EN 609 with connected plug socket Duty cycle 100 % Temperature range* -0 C C Voltage tolerance ± 10 % * The max. applicable operating temperature, depends on the temperature specification of the used valve. Model-.: -SP-011-G-4 -SP-011-G-47 Voltage 4 V DC 0 V AC Power consumption DC 4. W - Power consumption AC VA Form B industrial rm Contact distance mm 11 mm P + E Duty cycle 100 % Temperature range* Voltage tolerance ± 10 % IP 6 according to EN 609 with connected plug socket -0 C C M-04, M-0, M-07, M-, KM-09, KM-10, MS-18, KN-0, MN-06, MI-01, MI-0, MI-0 * The max. applicable operating temperature, depends on the temperature specification of the used valve. Model-.: -SP SP SP SP SP SP SP-0-4 Voltage V DC 4 V DC 4 V AC 11 V AC 0 V AC V DC 4 V DC Power consumption DC 4. W 4. W W. W Power consumption AC VA 4 VA 4 VA Model-.: -SP SP SP SP SP Voltage V DC/ 4V AC 4 V DC/ 48 V AC 110/11 V AC 0 V AC 4 V DC Power consumption DC 4.6 W 4.8 W - -. W Power consumption AC 7.1 VA 7.7 VA 6.0 VA/ 7.6 VA 7.9 VA - Specifics Enhanced humidity resistance. 04 Subject to change
5 Valves > electrically valves > operated electrically valves operatede > spare valves parts > Soleid coils M connection mm Contact distance - P IP 6 according to EN 609 with connected plug socket Duty cycle 100 % Temperature range* -0 C C Voltage tolerance ± 10 % * The max. applicable operating temperature, depends on the temperature specification of the used valve. Model-.: -SP-011--O -SP-0--O Voltage 4 V DC 4 V DC Power consumption DC 4.8 W. W Power consumption AC - - Specifics Mounting on manifold t allowed. With integrated LED and protective circuit. Min. mounting distance for manifold mounting is 0 mm. With integrated LED and protective circuit. Dimensions Form B according to DIN EN Form B industrial rm Ø Ø Ø8.1 Ø16 1. M Ø M 9. M connection Ø16 10 Ø Ø8.1 Ø16 Subject to change 0
6 valves Valves > electrically operatede valves > > technical information > Voltage code - HN * - * * * Manual override HN detent HNR detent HNT n-detent 0 Technical information Coil and plug options ATEX GD, encapsulated with casting compound width 0 mm Coil type -SP-07 1 with coil and plug 4 with coil, without plug without coil 6 without pilot valve with coil, with enhanced humidity resistance, without plug with coil, with enhanced humidity resistance, with plug ATEX GD, intrinsically safe, with plug width 0 mm -SP-08 A ATEX GD, without plug, width 0 mm -SP-040 B ATEX GD, with plug, width 0 mm -SP-040 C ATEX GD, without plug, width mm -SP-041 D E F G H I J K L M ATEX GD, encapsulated with casting compound width mm with coil, with enhanced humidity resistance, without plug, low temperature version with coil shape B according to DIN EN , with plug with coil shape B according to DIN EN , without plug with coil shape A according to DIN EN , without plug (if t standard) with coil shape A according to DIN EN , with plug (if t standard) with coil, with plug with LED and protective circuit with coil, with plug with LED, without protective circuit -SP-06 -SP SP-011-G -SP-011-G -SP-016 -SP-016 N with coil with M connection O P with coil with M connection with LED and protective circuit without connector bridge, without plug Q with coil with with cable R with cable up to 1 m length S T with connector bridge, without plug U ATEX GD, without coil (for coil -SP-06) V W X ATEX GD, Flame proof enclosuresand encapsulated with casting compound ATEX GD / GD, without coil (for coil -SP-041 and -SP-04) ATEX GD, without coil (for coil -SP-040 in 0V AC and 11V AC) Y ATEX GD, without coil (for coil -SP-08) Z ATEX GD / GD, without coil (for coil -SP-040 in 4V DC and -SP-07) -SP Manual override position on side of without indication ports 1//() DC ports 1//() AC ports 1//() DC, low power consumption ports 1//() DC ports /(4) AC ports /(4) DC, low power consumption ports /(4) without indication ports /(4) 0 Voltage without indication 1 V 4 V 4 V 4 48 V 110 V 6 11 V 7 0 V 8 40 V 9 A B C D E F 4 V 6 V 8 V 61 V 6 V 9 V Not all options are suitable for all valve series 06 Subject to change
NAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
More informationSeries MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
More informationElectrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
More informationElectrically operated poppet valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series MS- Technical details Connection Nominal size Temperature range Medium Series MS- page Materials M5 1. mm -1 C... +7 C Filtered, oil-free and dried compressed
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More informationElectrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
More informationValve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More informationElectrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
More informationElectrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
More informationElectrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationElectrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
More informationElectrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationElectrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
More informationSeries RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
More informationSeries RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
More informationBM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
More informationBM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
More informationMounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More information2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
More informationSOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
More informationPorts. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationTable of contents. Technical informations > ATEX Page Technical informations Page Mechanically operated valves Page 13-06
Technical informations > Table of contents ATEX Page 13-02 Technical General informations information Page 13-02 Mechanically operated valves Page 13-06 Pneumatically operated valves Page 13-06 Electrically
More informationSeries 581 ISO Pneumatic Directional Control Valves
Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized
More informationNugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
More informationFor double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
More information2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
More informationSolenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
More informationHERION SERIES Indirect solenoid actuated soft seal
HERION 9700 SERIES Indirect solenoid actuated soft seal spool valves with NAMUR interface /, 5/ - G/ For single and double acting actuators Crossover-free switching, switchover function guaranteed even
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationValve terminal systems Valve terminal systems Series TC08. Brochure
Series TC08 Brochure Bosch Rexroth AG Pneumatics Series TC08 Valve terminal systems Valve terminal system, Series TC08 Qn max. = 800 l/min; single plug-in wiring; Electr. connection: Plug M8 / plug, form
More informationValve terminal systems Valve terminal systems Series TC15. Brochure
Series TC15 Brochure Bosch Rexroth AG Pneumatics Series TC15 Valve terminal systems Valve terminal system, Series TC15 Qn max. = 1500 l/min; single plug-in wiring; Electr. connection: plug, form C / Plug
More informationValves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More information0322, 0324, Pilot Solenoid Valve, Plastic
Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More information02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
More informationPneumatic Valve 4V100 Series
tic Valves Pneumatic Valve 4V100 4V100 Low power consumption exhaust for the pilot and main valve, small size, large flow, good appearance, flexible, can be integrated installation, high wear resistant
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationSuper X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated
> > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly
More information97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT
97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with
More informationT 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators
T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and
More informationMINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More informationSOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
More information5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO 5599- #, #2, #3, #4 Steel reinforced main seals 6 bar and 0 bar CNOMO solenoid pilots with locking or non-locking manual override Low
More information97100 NAMUR. Technical data
9700 NAMUR /2-, /2- and / Directional control valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /4, /4 NPT NAMUR Interface For single and double operated actuators
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More information15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
More informationThe extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).
/2- and 4/2-multi-way valves ; servo-assisted; block assembly or NAMUR flange; DN 4; flow rate: 00 l/min Advantages / Benefits II 2G EEx ia IIC T6 PTB0 ATEX 275 approved Available for block assembly and
More information400 SERIES MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS
MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
More informationSolenoid directional valves type DPHI, DPHU
www.atos.com Table E0805/E Solenoid directional valves type, two stage, ISO 4401 size 10, 16, 25 and 32 37**/HM..... and are spool type, two or three position directional two stage solenoid valves designed
More informationRPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) 10/2010 Replaces 12/2007 4/3-, 4/2- way directional control valves with solenoid control Solenoids
More information% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.
Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow
More information2oo2 with bypass valve exhaust guards and indicators. 2oo2 I4. N/en
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability Modular design - Maxseal valves ypass function enables valve removal online Stainless
More informationMiniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More information26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves
60, 8007 NAMUR / & / > > Port size: G/ and NAMUR interface > > Easily interchangeable solenoid system > > For single and double operated actuators > > Standard manual override with detent > > Maintenance-free
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More information200 SERIES THREADED VALVES PENTAIR CLEAN AIR SYSTEMS
THREADED VALVES PENTAIR CLEAN AIR SYSTEMS Lock nut DESCRIPTION The is a range of diaphragm valves suitable for dust collector applications, in particular for reverse pulse-jet filter cleaning of filter
More informationCOMPACT VALVE - 1/4 Series DS2
COMPACT VALVE - G1/4 Features Suitable for manifold mounting Mounting provision for individual unit Compact size Manual override Wide range of manifolds available Wide range of coil voltages Important
More informationC 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil
More informationValve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More information3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
More informationDirectional valves Electrically operated CL03 series-ev. Brochure
CL03 series-ev Brochure 2 Rexroth Pneumatics CL03 series-ev Qn = 700 l/min valve width: 16 mm NO/NC plate connection compressed air connection output: Ø 8 - G 1/8 Manual override: detent 3 Qn = 700 l/min
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More informationSolenoid directional valves type DPHI and DPHE two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com Table E0857/E Solenoid directional valves type DPHI and DPHE two stage, ISO 4401 size 10, 16, 25 and 32 DPHE471*/H Spool type, two stage directional valves with solenoids certified according
More information600/700 SERIES FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS
FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium (anodised)
More informationType Modular Water Valve System servo-assisted; variable and extendable. 2/2 way; DN mm; 1 up to 7 bar Advantages / Benefits
2/2 way; DN 10-13 mm; 1 up to 7 bar Advantages / Benefits Reduction of Cost of Ownership up to 60% Modular system design Block assembly by lock technology Easy change between distributing and collecting
More information2/2 way Angle-Seat Valve for medium up to C, DN15-50
Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves
More informationSolenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
More informationTechnical Data Sheet
Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary
More informationseries UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK
DESCRIPTION Valves series UK are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV
More informationPilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
More information% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT
Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed
More informationSPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot
SPOOL VALVES operated / to / tapped body and NAMUR for integrated pilot ATEX /-/ Series - FEATURES The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter
More information% # ) Air and Inert Gas Intrinsically Safe Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
4 Air and Inert Gas Intrinsically Safe Valves Brass, Aluminum, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Intrinsically safe solenoid enclosures to provide corrosion resistance in harsh
More information300 SERIES DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS
DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Diecast aluminium (anodised) Body Diecast aluminium (anodised) Pilot base Brass (chromed) Pilot Diaphragm NBR Bolts and screws
More informationSOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
More informationNessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT Valve program for small and medium flows: VDHT 3/8 E 2/2 VDHT 1/2 E 2/2 VDHT 3/8 EA 2/2 VDHT 1/2 EA 2/2 Valve program
More informationOur policy is one of continued research and development. We therefore reserve the right
For single and double operated actuators 3/2-, 5/2- and 5/3 Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4, /4 NPT NAMUR Interface Exhaust
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationCoils for solenoid valves
MAKING MODERN IVING POSSIBE Data sheet Danfoss solenoid valves and coils are usually ordered separately to allow maximum flexibility, enabling you to select a valve and coil combination to best suit your
More informationData sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
More informationSolenoid valves 2/2-way servo operated type EV220B 15 50
MAKING MODERN LIVING POSSIBLE Datasheet Solenoid valves 2/2-way servo operated type EV220B 15 50 EV220B 15 50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass,
More informationDirect-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
More information26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.
60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard
More information