VALVES ISO 5599/1, SERIES IPV-ISV
|
|
|
- Dayna Thomas
- 5 years ago
- Views:
Transcription
1 VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. Fluid Operating pressure: pilot-assisted minimum pilot pressure / Flow rate at 6 DP 0.5 Flow rate at 6 DP Installation Assembly recoended lubricant Solenoid pilot maximum coil nut torque Compatibility with oils Nm ISO ISO 2 ISO 3 Filtered air without lubrication; lubrication, if used, must be continuous pneumatic / to 0 solenoid/pneumatic pneumatic / to 0 solenoid/pneumatic -0 to In any position (vertical assembly is not recoended for bistable valves subjected to vibration) On single and manifold bases according to ISO 5599/ ISO and UNI FD 22 to CNOmO/in-line pilot / m2 to CNOmO Bistable on solenoid pilot monostable on valve body Please refer to page 6-7 of the tecnical documentation COMPONENTS a VALVE BODy: Aluminium b END CAP: HOSTAFOrm c SPOOL: chemically nickel-plated aluminium d DISTANCE PLATES: plastic e GASKETS: NBr f PISTONS: HOSTAFOrm g PISTON GASKET: NBr h FILTEr: sintered bronze i SPrINGS: special steel j OPErATOr: Brass pipe Stainless steel core 2-07
2 FLOW CHART ISO Flow rates () ISO 2 Flow rates () Pressure () Pressure () ISO 3 Flow rates () Pressure () KEY TO CODES IPV ISV I P V 5 5 P N S O O FAMILY DIMENSIONS FUNCTION OPERATORS 4 RESETTING (2) FURTHER DETAILS ISO pneumatic 5 ISO 5 5/2 PN pneumatic S mechanical springs OO 5/2 ISO solenoid/pneumatic 6 ISO 2 6 5/3 SO solenoid/pneumatic B bistable CC closed centres 7 ISO 3 SE electric pilot-assisted D differential OC open centres DO solenoid/pneumatic in line PC pressure centres DE solenoid assisted in line m2 CO m2 solenoid/pneumatic CE m2 solenoid assisted Only for ISO Only for ISO and ISO
3 VALVES ISO 5599/, PNEUMATIC SERIES IPV Operating pressure minimum operation pressure: / Flow rate at 6 P 0.5 Flow rate at 6 P response times at 6 Bar: repositioning response times at 6 Bar: ISO ISO 2 ISO 3-0 to monostable on valve body PNEUMATIC ACTUATION ISO IPV 55 PNS OO IPV 55 PNB OO IPV 55 PND OO IPV 55 PNS CC IPV 55 PNS OC IPV 55 PNS PC 30 PNEUMATIC ACTUATION ISO IPV 65 PNS OO IPV 65 PNB OO IPV 65 PND OO IPV 65 PNS CC IPV 65 PNS OC IPV 65 PNS PC 705 PNEUMATIC ACTUATION ISO IPV 75 PNS OO IPV 75 PNB OO IPV 75 PND OO IPV 75 PNS CC IPV 75 PNS OC IPV 75 PNS PC
4 VALVES ISO 5599/, SOLENOID/PNEUMATIC, SERIES ISV Operating pressure: pilot-assisted minimum pilot pressure / Flow rate at 6 DP 0.5 Flow rate at 6 DP TrA / Trr monostable at 6 TrA / Trr bistable at 6 Solenoid pilot Coils maximum coil nut torque Nm ISO ISO 2 ISO 3 to 0 to 0-0 to / / / / / / 35 Standards CNOmO Bistable on solenoid pilot monostable on valve body 30 side DIN Form A ISO 22 side MONOSTABLE 5/2 ISO ISV 55 SOS OO ISV 55 SES OO 344 MONOSTABLE 5/2 ISO ISV 65 SOS OO ISV 65 SES OO 75 MONOSTABLE 5/2 ISO ISV 75 SOS OO ISV 75 SES OO
5 BISTABLE 5/2 ISO - MONOSTABLE 5/3 ISO ISV 55 SOB OO ISV 55 SOD OO ISV 56 SOS CC ISV 56 SOS OC ISV 56 SOS PC ISV 55 SEB OO ISV 55 SED OO ISV 56 SES CC ISV 56 SES OC ISV 56 SES PC 372 BISTABLE 5/2 ISO 2 - MONOSTABLE 5/3 ISO ISV 65 SOB OO ISV 65 SOD OO ISV 66 SOS CC ISV 66 SOS OC ISV 66 SOS PC ISV 65 SEB OO ISV 65 SED OO ISV 66 SES CC ISV 66 SES OC ISV 66 SES PC 720 BISTABLE 5/2 ISO 3 - MONOSTABLE 5/3 ISO ISV 75 SOB OO ISV 75 SOD OO ISV 76 SOS CC ISV 76 SOS OC ISV 76 SOS PC ISV 75 SEB OO ISV 75 SED OO ISV 76 SES CC ISV 76 SES OC ISV 76 SES PC
6 VALVES ISO 5599/, PNEUMATIC, SERIES ISV WITH IN-LINE SOLENOID PILOT Operating pressure: pilot-assisted minimum pilot pressure / Flow rate at 6 DP 0.5 Flow rate at 6 DP TrA / Trr monostable at 6 TrA / Trr bistable at 6 Solenoid pilot Coils maximum coil nut torque Nm ISO to 0 to 0-0 to / / 20 In line pilot Bistable on solenoid pilot 30 side DIN Form A ISO 22 side MONOSTABLE 5/2 ISO ISV 55 DOS OO ISV 55 DES OO 396 BISTABLE 5/2 ISO ISV 55 DOB OO ISV 55 DEB OO 450 MONOSTABLE 5/3 ISO ISV 56 DOS CC ISV 56 DOS OC ISV 56 DOS PC ISV 56 DES CC ISV 56 DES OC ISV 56 DES PC
7 COILS AND CONNECTORS FOR ISO 5599/ SOLENOID VALVES SERIES ISV COILS SIDE 22 Voltage tolerance: 0% to + 5% Insulation class: F55 Degree of protection: IP65 EN60529 with connector Avoid prolonged exposure to the atmospheric agents Coil temperature 00% ED: 70 C at 20 C Ambient temperature According to Atex 94/9 CE rule, group 2, category 3 GD COILS SIDE 30 CONNECTOR FOR COILS SIDE 22 Code Abbrev. Nominal voltage Absorption Inrush Holding W Coil 22 Ø 8 BA 2W-2VDC 2Vcc 2W 2W W Coil 22 Ø 8 BA 2W-24VDC 24Vcc 2W 2W W Coil 22 Ø 8 BA 3.5VA-24VAC 24V 50/60Hz 5.3VA 3.5VA W Coil 22 Ø 8 BA 3.5VA-0VAC 0V 50/60Hz 5.3VA 3.5VA W Coil 22 Ø 8 BA 3.5VA-220VAC 220V 50/60Hz 5.3VA 3.5VA Electric contact DIN43650 shape A ISO 4400 Voltage tolerance: -0% + 0% Insulation class: F55 Degree of protection: IP65 EN60529 with connector Avoid prolonged exposure to the atmospheric agents According to Atex 94/9 CE rule, group 2, category 3 GD Code Abbrev. Nominal voltage Absorption Inrush Holding W Coil 30 Ø 8 4W-24VDC 24Vcc 5W 4W W Coil 30 Ø 8 4VA-24VAC 24V 50/60Hz 0VA 4VA W Coil 30 Ø 8 4VA-0VAC 0V 50/60Hz 0VA 4VA W Coil 30 Ø 8 4VA-220VAC 220V 50/60Hz 0VA 4VA Code Type Colour Ø Cable W Standard Black PG9 W LED 24V Transparent PG9 W LED 0V Transparent PG9 W LED 220V Transparent PG9 W LED + VDr 24V Transparent PG9 W LED + VDr 0V Transparent PG9 W LED + VDr 220V Transparent PG9 W Atex II 3 GD Black PG9 CONNECTOR FOR COILS SIDE 30 Code Type Colour Ø Cable W Standard Black PG9 W LED 24V Transparent PG9 W LED 0V Transparent PG9 W LED 220V Transparent PG9 W LED + VDr 24V Transparent PG9 W LED + VDr 0V Transparent PG9 W LED + VDr 220V Transparent PG9 KIT COIL EEXM KIT COILS SIDE 22 IP65 Code Description Kit for coil VDC EEXmT5 cable 3 m Kit for coil VDC EEXmT5 cable 5 m Kit for coil VAC EEXmT5 cable 3 m Kit for coil VAC EEXmT5 cable 5 m Kit for coil 30 0 VAC EEXmT5 cable 3 m Kit for coil 30 0 VAC EEXmT5 cable 5 m Kit for coil VAC EEXmT5 cable 3 m Kit for coil VAC EEXmT5 cable 5 m According to Atex 94/9 CE rule, group II, category 2 GD Code Description Kit for coil 22 - IP65 Improved IP65 protection, even after prolonged exposure to atmospheric agents. Applicable to valves with a technopolymer control. 2-3
VALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
VALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
B1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
SOLENOID VALVES PIV.M 15 mm
SOLENOID VALVES PIV.M mm / NC/NO direct control microvalves Possible assembly on single and multiple bases Monostable manual actuation as standard Assembly in any position Operation with filtered lubricated
MACH 16 VALVES DISTRIBUTORS
MACH 16 VALVES Available in size 1/8 only, versions 5/2 and 5/3 and with pneumatic and solenoid actuation. The mach 16 valve is a typical small size valve, only 16 mm wide, with excellent performance 750
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
VENTTIILIT MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME. TECHNICAL DATA Valve fitting port Fluid Type Versions Operators: 0.
venttiilit MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Valve fitting port Fluid Type Versions Operators: Operating pressure C / Flow rate at 6 Bar P 0.5 Bar Flow rate at 6 Bar P 1 Bar N Installation
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
3/2-5/2 ports / positions
Series SOLENOID SPOOL VALVES G / THREADED PORTS with CNOMO pilots /-/ ports / positions SPECIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PORTS : G/ PRESSURE : to 0 bar TEMPERATURE RANGE
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
MULTIPLE CONNECTORS MACH 16
Mach 16 valves can be mounted on bases with pneumatic or electrical connection. The electric contacts of the individual valves are connected by means of a printed circuit board in a sealed conduit to a
MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
Solenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
Solenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Series MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
High Pressure Valves
High Pressure Valves Available from BetaValve.com 01494 459 511 Sales@betavalve.com Park House Business Centre, Desborough Park Road, High Wycombe Bucks HP12 3DJ Series 119 Solenoid valve 2 way normally
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
SOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
Valve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
High Flow Valve Actuation Range. NAMUR Valves G1/4" & G1/2" Piped Valves G1/4" & G1/2" Banjo Valves G1/8" & G1/4"
31-37 High flow NAMUR valves G1/ and G1/ aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding High Flow Valve Actuation
Solenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
400 SERIES MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS
MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
APPLICATION OF SYSTEM 8
System 8 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approimately
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO (15 mm width) connector size 15
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO ( mm width) connector size / Series 0 FEATURES Low consumption (0,W) Compact, monobloc solenoid pilot valve with spade-plug connector type AMP,8x0,
Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
BRONZE ZEUS PNEUMATIC ANGLE-SEAT VALVE
FEATURES The bronze ZEUS valve is intended for the automatic shutoff of networks of fluids. The full-bore inclined-seat body and the excellent flow-rate coefficients allow for very low pressure drops.
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
NAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
2-position electric actuators with Ball valves VBZ ½...11/4
4 831.2 & VBZ ½...11/4 2-position electric actuators with Ball valves VBZ ½ 11/4 90 angle - Unidirectional rotation VBZ ½ 11/4 Electric rotary actuators for two-port ball valves Operating voltage AC 230
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
Solenoid valves VUVS/valve manifold VTUS, NPT
Solenoid valves VUVS/valve manifold VTUS, NPT -V- New VUVS-LT25, VTUS-25 Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty
Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
System 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
Solenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
Solenoid valves VZWM-L
Key features and type codes Brief description Indirectly controlled poppet valve with diaphragm control Connection, valve G¼ G2 Flow rate 1,400 31,000 l/min Available in brass or stainless steel casting
System 6. ü ( System 6
System 6 ü www.nassmagnet.com ( +9 511 676-0 System 6 The name System 6 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
300 SERIES DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS
DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Diecast aluminium (anodised) Body Diecast aluminium (anodised) Pilot base Brass (chromed) Pilot Diaphragm NBR Bolts and screws
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
zamak nitrile rubber self-extinguishing technopolymes aluminum
0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
NAMUR Technical details
Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
EVI 5 S13 Solenoid System
EVI 5 S13 Solenoid System The EVI5 S13 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 13
MECAIR 400 SERIES MANIFOLD MOUNT VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
400 SERIES MANIFOLD MOUNT VALVES CLEAN AIR SOLUTIONS CONSTRUCTION FEATURES VALVE DESCRIPTION COVER BODY PILOT DIAPHRAGM BOLTS AND SCREWS DIAPHRAGM BACKING DISK DIAPHRAGM SPRING Diecast aluminium (anodised)
Series 581 ISO Pneumatic Directional Control Valves
Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized
200 SERIES THREADED VALVES PENTAIR CLEAN AIR SYSTEMS
THREADED VALVES PENTAIR CLEAN AIR SYSTEMS Lock nut DESCRIPTION The is a range of diaphragm valves suitable for dust collector applications, in particular for reverse pulse-jet filter cleaning of filter
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
N/** поставка оборудования для подготовки воздуха
M/0000 Series Inline /, 5/ and 5/ Spool Valves Solenoid and Pilot Actuated G / Low power solenoids High flow Unique steel reinforced seals Light weight corrosion resistant materials Technical Data Medium:
SUMMARY KIT PNEUMATIC MOTION
SUMMARY G1 P CONFIGURABLE (KIT PMC) G1.2 P READY (KIT PMR) G1.3 P CUSTOM G1.9 SUMMARY G1.1 CONFIGURABLE (KIT PMC) An on-line configurator is provided for the ease-and-quick selection of the cylinder, the
Electro-pneumatic control valves
Electropneumatic control valves Visit our website for further information www.crouzet.com 9 Electropneumatic miniature solenoid Miniature solenoid valves Terminals Wires Connector LED indicators Valve
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Standard valves to ISO Product range overview
Standard valves to ISO 15218 Product range overview Function Electrical connection Voltage Manual override Page/Internet Pilot valve to ISO 15218 Width 15 mm Plug connector type C, to EN 175301-803 Plug
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
600/700 SERIES FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS
FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium (anodised)
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function)
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, NAMUR, / 0 0 /-/ Série FEATURES The monostable spool valves have TÜV certified IEC 608 Functional
02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
System 6. Solenoid Coils Armature Assemblies Valve Systems
Solenoid Coils Armature Assemblies Valve Systems a Kft. i r á g n u H t e n nass mag Precision Controls Kft. since 0 Nass Controls LP Nass Magnet GmbH Introduction.........................................
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 4 2 5 4 2 5 4 2 5 4 2 5 5/2 Series 55 FEATURES The monostable spool valves have TÜV certified
Nugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
A K 3 E D G
005 Series. How to Order - G3 or Multipol Assembly Kit A K 3 E D 0 0 0 0 3 G A36 Electronic / Electrical Systems Type & Location 3 = T = Terminal Strip - 3 J = 5 pin SUB-D connector M = 37 pin SUB-D connector
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 NC 0 0 / Series 55 FEATURES The monostable spool valves have TÜV certified IEC 6508
Individual, Multipole and Fieldbus
Valve Islands > 016 > Series Y valve islands Series Y valve islands, Individual, Multipole and Fieldbus Valve Island with integrated Pneumatics and Electronics. Available versions: Individual, Multipole,
V New VSVA. Solenoid/pneumatic valves, ISO Electrically or pneumatically actuated valves. With internal or external pilot air
V New VSVA B01_01_001_E Solenoid/pneumatic valves, ISO 15 407 1 Electrically or pneumatically actuated valves With internal or external pilot air Pneumatic or mechanical reset Ausgewählte Typen nach ATEX
MECAIR 300 SERIES DRESSER NUT VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
300 SERIES DRESSER NUT VALVES CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES VALVE FLUIDS PRESSURE RANGE Filtered air and oil free Standard Nitrile: 20 C/+80 C Optional Viton: 30 C/+200
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
MECAIR 200 SERIES THREADED VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
200 SERIES CLEAN AIR SOLUTIONS - 200 SERIES CONSTRUCTION FEATURES VALVE Lock nut DESCRIPTION COVER Diecast aluminium (anodised) BODY Diecast aluminium (anodised) PILOT BASE Aluminium (anodised) PILOT Stainless
5/2-5/3 VALVES (1/8" + SUBBASE) Series G
/-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact
Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
System 13. ü ( System 13
System ü www.nassmagnet.com ( +9 676-0 System The name System stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all
EB 80 SUMMARY EB 80 DISTRIBUTORS P EB 80 ELECTRO-PNEUMATIC SYSTEM PAGE 4 P EB 80 BASIC PAGE 13 P EB 80 - SIGNAL MODULES - S PAGE 16
EB 80 SUMMARY EB 80 P EB 80 ELECTRO-PNEUMATIC SYSTEM PAGE 4 P EB 80 BASIC PAGE 13 P EB 80 - SIGNAL MODULES - S PAGE 16 P EB 80 - ELECTRICAL CONNECTION - E PAGE 22 P EB 80 - MULTI-POLE ELECTRICAL CONNECTION
SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4
SPOO & SEEVE VAVES monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FEATURES Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended
DIRECT OPERATED SOLENOID PILOT VALVES Product Index
DIRECT OPERATED SOLENOID PILOT VALVES Product Index ports/positions Function pipe connections * - instant fittings O.D. (mm) w - internal thread (ØG) x - external thread (ØG) n - pad mount : - pad mount,
SUMMARY PROCESS VALVES MULTIPLE FLUIDS
SUMMARY PROCESS VALVES MULTIPLE FLUIDS P MULTIPLE-FLUID PROCESS VALVES.2 P SOLENOID VALVES, SERIES EV-FLUID.4 P SOLENOID VALVES, SERIES EV-FLUID, DIRECT ACTING.5 P SOLENOID VALVES, SERIES EV-FLUID, SERVO-ASSISTED