Series 581 ISO Pneumatic Directional Control Valves

Size: px
Start display at page:

Download "Series 581 ISO Pneumatic Directional Control Valves"

Transcription

1 Series 581 ISO Pneumatic Directional Control Valves

2 Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series A complete series of standardized pneumatic valves Series 581 valves provide for pneumatic valve interfaces based on ISO/EN and CNOMO standards. Available in four ISO sizes, 581 offers the entire performance range of pneumatic valves, either as a single valve or valve terminal system, with electric or pneumatic control. The 581 incorporates a non-lubricated, balanced spool and sleeve consisting of a stainless steel sleeve with a polished inner diameter, a nylon spool, and a series of static o-rings encapsulated by Teflon wear rings to reduce friction. Valves are available in 5/2-way and 5/3-way spool configurations for all sizes 1-4, and 2x3/2-way spool configuration for size 1. Flow rates range from 1.1 to 6.0 C v. Series 581 is used in many sectors, such as the automotive industry, as well as the wood, print, paper, heavy industries and many others. Wide range of voltages Coil style choices: -15mm, 2 watt coil -22mm, 5 watt coil (shown) -30mm, CNOMO operator Manual override -Locking or Locking/Non-Locking Versions: -Single solenoid -Double solenoid, 2 or 3 position -Air pilot 15mm operator version Optional built-in flow controls ISO Subbases: -Single and manifold subbases -NPTF or ISO G(BSPP) porting -Sandwich flow controls and regulators available

3 Series 581 Valves, ISO Sizes 1-4 Index Page Introduction and ordering guide... 4 Valve label information-internal/external pilot conversion... 5 Ordering key for single valves, solenoid version... 6 Single valves, ISO 1-2, 15 mm pilot, version Single valves, ISO 1-2, 15 mm pilot, version Single valves, ISO 1-4, 22 mm pilot Single valves, ISO 1-4, 30 mm pilot, non-locking override Single valves, ISO 1-4, 30 mm pilot, locking/nonlocking override 14 Single valves, ISO 1-4, 30 mm pilot, no override Single valves, ISO 3, M12 connection Electrical connectors for 15 mm pilot valves Electrical connectors for 22 mm pilot valves Electrical connectors for 30 mm pilot valves Ordering key for single valves, air pilot version Single valves, ISO 1-4, air pilot Subbases and manifolds, NPT, ISO size Subbases and manifolds, NPT, ISO size Subbases and manifolds, NPT, ISO size Subbases and manifolds, NPT, ISO size Subbases, metric, ISO sizes Subbases, metric, VDMA, sizes How to order valve manifolds for self assembly Manifold subbases, metric, ISO sizes Maintenance plate, ISO sizes Sandwich regulator, ISO sizes Spare parts

4 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Introduction and ordering guide Introduction ISO size 1, 2, 3, and 4 as per ISO Functions: 2 x 3/2, 5/2 and 5/3. High flow; ISO 1: 1400 Nl / min (1.4 Cv), ISO 2: 2700 Nl / min. (2.7 Cv), ISO 3: 4800 l / min.(4.8 Cv), ISO 4: 6000 l/min. (6.0 Cv) Small built-in measurements and long life-time. Short response times. Subbases in various versions for singel or manifold mounting. Electrical connections for many different requirements. BUS-communication with different protocols. How to order Ordering of series 581 valve can be made for: 1) Single valves 2) Parts for valve manifolds, self assembly 3) Complete valve manifolds Single valves - Choose your valves from section "Single valves" (see Product overview) or use the ordering key for single valves, see next page. - Choose el. connectors. - Choose subbases. - Fittings can be found on-line or in our Accessories catalog Parts for valve manifolds The ordering of parts for valve manifolds is made in four steps: 1) Choose your valves from section "Single valves" (see Product overview) or use the "Ordering key for single valves", see next page. 2) For some electrical versions additional accessories are required, e.g. el. connectors or el. connection modules. 3) Choose your subbases (NPT vs. metric) 4) Fittings can be found on-line or in our Accessories catalog Complete valve manifolds - You can order a complete valve manifold according to your specifications. Please use our on-line configurator, available from 4

5 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Valve label information, Internal/External pilot conversion How to Read the Valve Label: Located on one end of the valve body are labels which identify the valve. Below you will see a picture showing that end of the valve. You can see that there are two labels one located on top of the other. The LOWER label identifies the SERIES BODY SIZE FUNCTION and valve symbol. The UPPER label identifies the type of operator that is controlling the valve as well as the type of actuator(s). Note: The label does NOT include any information regarding Flow Controls, Solenoids, DIN tops, or pilot valves if applicable. Internal/External Pilot Conversion: Pilot pressure for the Solenoid Operated versions can either be supplied INTERNALLY from the #1 Supply pressure port of EXTERNALLY from the #14 pilot port. All series 581 Solenoid valves are SHIPPED as Internally piloted but, can very easily be converted to Externally piloted when necessary. To convert a valve to Externally Piloted, it is necessary to remove the cover plate and flip the gasket as shown in the illustration below. The tab should be under the appropriate symbol. Note: Except 581.*61, differential pilot version. Series Body Size Tab Operator Function Model 5

6 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Ordering key single valves - Solenoid Versions How to order single valves This ordering key can be used to build the ordering number of a specific valve or to identify an existing valve. The valves, with complete ordering numbers, can also be found under section "Single valves", see page product overview. Ordering Key ISO size / Connection ports Valve body/function 1 1/4" and 3/8" NPT, G1/8, G 1/4, Ø 6-8 mm 1 5/2 single solenoid, spring return 2 3/8" and 1/2" NPT, G1/4, G3/8, Ø 8 mm 2 5/2 double solenoid 3 1/2" and 3/4" NPT, G3/8,- G1/2 4 5/3 closed center 4 1" NPT, G1/2, G3/4, G 1 5 5/3 exhaust open center 6 5/2 single solenoid, air return (differential spool) 7 5/3 supplied center 8 2 x 3/2 (only ISO 1, without flow controls, and external pilot) 581 XXX XXX 0 Control version Flow controls/pilot control Coil El. connector/pilot type 0 Without cover (only valve body) 0 Without flow controls 0 Without coil 0 Without el. connector 1 With flow controls 0 Without flow controls, 0 Without coil 0 Without el. connector internal 1 With flow controls, internal 1 24 V DC 1 El. connector standard 1 El. 5 W, 1 pilot valve (22 mm) 2 Without flow controls, 2 24 V AC 2 El. connector with LED external 2 El. 5 W, 2 pilot valves (22 mm) 3 With flow controls, external V AC and transient protection V AC 5 12 V DC 6 48 V DC 3 Pressure actuated 0 Without flow controls 0 Without coil 0 Without el. connector 4 Logic, int. signal processing (ISO 2-4) 1 With flow controls 5 El. 2 W, 1 pilot valve (15 mm) 0 Without flow controls, 1 24 V DC 3 15 mm pilot valve, pin dist. 8 mm internal without connector (IP65/NEMA 4) 6 El. 2 W, 2 pilot valves (15 mm) 1 With flow controls, internal Size 1 and 2 only 2 Without flow controls, 6 15 mm pilot valve, encaps. cable external with connector (IP67/NEMA 6) 3 With flow controls, external 7 El. 1 pilot valve (30 mm) CNOMO 0 Without flow controls, 0 Without coil 0 Without pilot valve internal 8 El. without pilot valve, CNOMO 1 With flow controls, internal V AC 3 Pilot valve without man. override 9 El. 2 pilot valves (30 mm) CNOMO 2 Without flow controls, 5 24 V DC, 6,7 W 4 Pilot valve with single solenoid Size 1 and 2 only external with non-locking manual override 3 With flow controls, external 6 24 V DC, 2 W 5 Pilot valve with single-/ double solenoid, locking/non-locking manual override Note! It is only possible to combine options within the same horizontal section. Completely assembled and tested custom valve manifolds can be specified using our on-line configurator at 6

7 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Ordering key single valves Symbol Description Example of a symbol denoting built-in throttle units Example of a symbol denoting external piloted valves. Other voltages For other voltages than those available in the ordering key, please order: 1) Basic valve: Valve with control versions 1 or 2 only, without coil and without el. connector. 2) Coil: Separate coil from table below. Example: ISO 1 valve, 5/2 double solenoid with 48 V AC and throttles Order: 1 x x Coils for other voltages than above. Only valid for control version 1 or 2 Voltage ±10% Part no. 220 V DC V DC V AC EEx m II T5, 24 V DC EEx m II T5, 230 V AC Electrical connectors Voltage Pilot width [mm] Distance between pins Cable [m] LED Form Part no. 24 V AC/DC C, DIN V AC/DC 15 8 C, DIN V AC/DC 15 8 C, DIN max 250 V AC/DC B V AC/DC B V AC/DC B V AC/DC B V AC/DC B max. 250 V AC/DC B V AC/DC B V AC/DC B max. 250 V AC/DC A, DIN V AC/DC A, DIN V AC/DC A, DIN V AC A, DIN V DC A, DIN V AC/DC A, DIN = included. = not included. 7

8 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 1 2, 15 mm pilot valves Technical Data Standard ISO Working pressure max. 10 bar (145 psi) - Internally fed pilots min. See table - Externally fed pilots min. 1 bar ( 15 psi) Extenal pilot feeding max. 10 bar (145 psi) min. See table Ambient temperature range -10 C to +50 C (+14 F to +122 F) Life expectancy 50 million cycles Materials: Valve body Aluminum, painted gray Subbases Aluminum Seals Buna N Wear rings Ultra high molecular weight polyethylene Technical information Technical information 15 mm pilot valve with encapsulated cable, IP 67(NEMA 6), with 3-pin male 8 mm snap in connector. Voltage, type of current 24 V DC ±10% Inrush, holding power 2,2 W Duty cycle 100% ED Pilot valve with non locking manual override. The valve can be used as replacement valve in a manifold with electrical version 32. Function Flow at 6 bar (87 psi) and ΔP (pressure drop) 1 bar (15 psi), Qn Nl / min (Cv) C-value ISO 1 ISO 2 ISO 1 ISO 2 5/ (1.4) 2700 (2.7) 5,2 10,8 5/ (1.1) 2100 (2.1) 4,3 8,9 2 x 3/2 950 (0.95) 3,2 Function Weight [kg] (lbs) Response time, t F /t E [ms] Min. pilot pressure [bar] (psi) ISO 1 ISO 2 ISO 1 ISO 2 ISO 1 ISO 2 5/2 Single solenoid 0,30 (0.66) 0,47 (1.036) 15/30 14/28 3,0 (44) 3,0 (44) 5/2 Double solenoid 0,35 (0.77) 0,49 (1.080) 14/14 13/13 1,5 (22) 1,5 (22) 5/3 0,35 (0.77) 0,49 (1.080) 15/22 14/28 3,0 (44) 3,0 (44) 2 x 3/2 0,35 (0.77) 15/22 3,5 (51) 5/2 Single solenoid air return 0,30 (0.66) 0,47 (1.036) 15/30 14/20 1,3 (19) 2,7 (39) 8

9 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 1 2, 15 mm pilot valves Technical Data Standard ISO Working pressure max. 10 bar (145 psi) - Internally fed pilots min. See table - Externally fed pilots min. 1 bar ( 15 psi) External pilot feeding max. 10 bar (145 psi) min. See table Ambient temperature range -10 C to +50 C (+14 F to +122 F) Life expectancy 50 million cycles Materials: Valve body Aluminum, painted gray Subbases Aluminum Seals Buna N Wear rings Ultra high molecular weight polyethylene Technical information 15 mm pilot valve with flat pins, 8 mm pin distance. Delivered without connector. Protection class IP 65 (NEMA 4) with connector. Voltage, type of current 24 V DC ±10% Inrush, holding power 2,2 W Duty cycle 100% ED Pilot valve with non locking manual override. The valve can be used as a replacement valve for manifolds with el. version 50. Function Flow at 6 bar (87 psi) and ΔP (pressure drop) 1 bar (15 psi), Qn Nl / min (Cv) C-value ISO 1 ISO 2 ISO 1 ISO 2 5/ (1.4) 2700 (2.7) 5,2 10,8 5/ (1.1) 2100 (2.1) 4,3 8,9 2 x 3/2 950 (0.95) 3,2 Function Weight [kg] (lbs) Response time, t F /t E [ms] Min. pilot pressure [bar] (psi) ISO 1 ISO 2 ISO 1 ISO 2 ISO 1 ISO 2 5/2 Single solenoid 0,30 (0.66) 0,47 (1.036) 15/30 14/28 3,0 (44) 3,0 (44) 5/2 Double solenoid 0,35 (0.77) 0,49 (1.080) 14/14 13/13 1,5 (22) 1,5 (22) 5/3 0,35 (0.77) 0,49 (1.080) 15/22 14/28 3,0 (44) 3,0 (44) 2 x 3/2 0,35 (0.77) 15/22 3,5 (51) 5/2 Single solenoid air return 0,30 (0.66) 0,47 (1.036) 15/30 14/28 1,3 (19) 2,7 (39) 9

10 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 1 2, 15 mm pilot valves 5/2 Single solenoid with spring return 5/2 Double solenoid and 5/3 valves 5/2 Single solenoid wtih air return Size A B C D E F G H ISO ISO

11 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 1 4, 22 mm pilot valves Technical Data Standard ISO Working pressure max. 10 bar (145 psi) - Internally fed pilots min. See table - Externally fed pilots min. 1 bar ( 15 psi) External pilot feeding max. 10 bar (145 psi) min. Ambient temperature range Life expectancy See table -20 C to +50 C (<100 % ED) (-4 F to +122 F)(<100 % ED) -20 C to +70 C (<50 % ED) (+68 F to +158 F)(<50 % ED) 50 million cycles as per PNEUROP 6611 class 2 Materials: Valve body Aluminum, painted gray Subbases Aluminum Seals Buna N Wear rings Ultra high molecular weight polyethylene Technical information 22 mm pilot valve with flat pins, 11 mm pin distance. Voltage, type of current See table Inrush/Holding power 24 V DC 5 W 110, 230, 24 V AC 10/8 VA Duty cycle 100 % ED Voltage tolerance ±10 % Protection class IP 65 with connector Pilot valve with locking manual override. The valves can be used as replacement valves for valve manifolds with electrical version Function Flow at 6 bar (87 psi) and Δp (pressure drop) 1 bar (15 psi), Qn l/min.(cv) C-value ISO 1 ISO 2 ISO 3 ISO 4 ISO 1 ISO 2 ISO 3 ISO 5/ (1.4) 2700 (2.7) 4800 (4.8) 6000 (6.0) 5,2 10,8 18,9 24,5 5/ (1.1) 2100 (2.1) 4100 (4.1) 5000 (5.0) 4,3 8,9 14,1 15,5 2 x 3/2 250 (0.25) 3,2 Function Switching time, t F /t E [ms] Weight [kg] (lbs) 5/2 Single solenoid 5/2 Double ISO 1 ISO 2 ISO 3 ISO 4 ISO 1 ISO 2 ISO 3 ISO 4 12/25 15/36 21/58 26/72 0,330 (0.728) 0,550 (1.213) 0,950 (2.094) 1,350 (2.976) 13/13 13/13 16/16 20/20 0,440 (0.970) 0,650 (1.433) 1,040 (2.293) 1,470 (3.241) solenoid 5/3 15/22 15/25 25/40 30/50 0,440 (0.970) 0,650 (1.433) 1,040 (2.293) 1,470 (3.241) 2 x 3/2 12/22 0,440 (0.970) Function Min pilot pressure [bar] (psi) ISO 1 ISO 2 ISO 3 ISO 4 5/2 Single solenoid 3,0 (44) 3,0 (44) 3,0 (44) 3,0 (44) 5/2 Double solenoid 1,5 (22) 1,5 (22) 1,5 (22) 1,5 (22) 5/3 3,0 (44) 3,0 (44) 3,0* (44) 3,0* (44) 2 x 3/2 1,3 (19) 2,7 (39) 1,5 (22) 1,5 (22) 5/2 Single solenoid air return 1,3 (19) 2,7 (39) 1,5 (22) 1,5 (22) * 5/3 supplied center: Pilot pressure 3 bar (44 psi) only for externally piloted valve. 11

12 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 1 4, 22 mm pilot valves 5/2 Single solenoid with spring return 5/2 Double solenoid and 5/3 valves 5/2 Single solenoid with air return *) Alternative manifold sub-base. **) Assembly height depends on which manifold sub-base is chosen. (Add the thickness of the base to dimension D). Note. The pilot valves can be lossened and turned through 180. Size A B C D E F G H J ISO ISO ISO ISO

13 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 1 4, 30 mm pilot valves as per CNOMO for connector, non-locking manual override Technical Data Standard ISO Working pressure max. 16 bar (232 psi) - Internally fed pilots min. See table - Externally fed pilots min. 1 bar ( 15 psi) External pilot feeding max. 16 bar (232 psi) min. See table Ambient temperature range, solenoid Life expectancy -15 C to +50 C (+5 F to +122 F) 50 million cycles as per PNEUROP 6611 class 2 Materials: Valve body Aluminum, painted gray Subbases Aluminum Seals Buna N Wear rings Ultra high molecular weight polyethylene Technical information 30 mm pilot valve as per CNOMO, pin distance 18 mm, for connector as per Form A DIN Delivered without connector. Voltage, type of current 24 V DC / 42 V AC or 230 V AC Duty cycle 100% Voltage class IP 65 (NEMA 65) with connector Pilot valve with non locking manual override. The valves can be used as replacement valves for complete valve manifolds with el. version 70 or 72. Function Flow at 6 bar (87 psi) and ΔP (pressure drop) 1 bar (15 psi), Qn l/min (Cv) C-value ISO 1 ISO 2 ISO 3 ISO 4 ISO 1 ISO 2 ISO 3 ISO 4 5/ (1.4) 2700 (2.7) 4800 (4.8) 6000 (6.0) 5,2 10,8 18,9 24,5 5/ (1.1) 2100 (2.1) 4100 (4.1) 5000 (5.0) 4,3 8,9 14,1 15,5 2 x 3/2 950 (0.95) 3,2 Function Inrush/ holding power Switching time, t F t E [ms] Weight [kg] (lbs) [W] ISO 1 ISO 2 ISO 3 ISO 4 ISO 1 ISO 2 ISO 3 ISO 4 Single 6,7 15/28 17/40 24/66 33/77 0,330 (0.728) 0,550 (1.213) 0,950 (2.094) 1,350 (2.976) solenoid Double 6,7 13/13 14/14 18/18 21/21 0,440 (0.970) 0,650 (1.433) 1,040 (2.293) 1,470 (3.241) solenoid 5/3 6,7 14/28 17/36 22/61 26/68 0,440 (0.970) 0,650 (1.433) 1,040 (2.293) 1,470 (3.241) 2 x 3/2 6,7 12/29 0,350 (0.772) Function Min. pilot pressure [bar] (psi) ISO 1 ISO 2 ISO 3 ISO 4 5/2 Single solenoid 3,0 (44) 3,0 (44) 3,0 (44) 3,0 (44) 5/2 Double solenoid 1,5 (22) 1,5 (22) 1,5 (22) 1,5 (22) 5/3 3,0 (44) 3,0 (44) 3,0* (44) 3,0 (44) 2 x 3/2 3,5 (51) 5/2 Single solenoid air return 1,3 (19) 2,7 (39) 1,5 (22) 1,5 (22) * 5/3 supplied center: Pilot pressure 3 bar (44 psi) only for externally piloted valve. 13

14 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 1 4, 30 mm pilot valves as per CNOMO for connector, locking/non-locking manual override Technical Data Standard ISO Working pressure max. 10 bar (145 psi) - Internally fed pilots min. See table - Externally fed pilots min. 1 bar ( 15 psi) External pilot feeding max. 10 bar (145 psi) min. See table Ambient temperature range, solenoid Life expectancy -15 C to +50 C (+5 F to +122 F) 50 million cycles as per PNEUROP 6611 class 2 Materials Valve body Aluminum, painted gray Subbases Aluminum Seals Buna N Wear rings Ultra high molecular weight polyethylene Technical information 30 mm pilot valve as per CNOMO, pin distance 18 mm, for connector as per Form A DIN Delivered without connector. Voltage, type of current 230 V AC or 24 V DC Duty cycle 100% Protection class IP 65 (NEMA 65) with connector Pilot valve with locking/non locking manual override. The valves can be used as replacement valves for complete valve manifolds with el. version 82 or 89. Function Flow at 6 bar (87 psi) and ΔP (pressure drop) 1 bar (15 psi), Qn l/min (Cv) C-value ISO 1 ISO 2 ISO 3 ISO 4 ISO 1 ISO 2 ISO 3 ISO 4 5/2 1400(1.4) 2700 (2.7) 4800 (4.8) 6000 (6.0) 5,2 10,8 18,9 24,5 5/ (1.1) 2100 (2.1) 4100 (4.1) 5000 (5.0) 4,3 8,9 14,1 15,5 2 x 3/2 950 (0.95) 3,2 Function Inrush/ holding power Switching time, t F /t E [ms] Weight [kg] (lbs) [W] ISO 1 ISO 2 ISO 3 ISO 4 ISO 1 ISO 2 ISO 3 ISO 4 Single solenoid 6,7, (vers. 82) 15/28 17/40 24/66 33/77 0,330 (0.728) 0,550 (1.213) 0,950 (2.094) 1,350 (2.976) Double solenoid 6,7, (vers. 82) 13/13 14/14 18/18 21/21 0,440 0,650 1,040 1,470 (0.970) 5/3 6,7, (vers. 82) 14/28 17/36 22/61 26/68 0,440 (0.970) 2 x 3/2 6,7, (vers. 82) 12/29 0,350 (0.772) Single solenoid 2, (vers. 89) 17/26 19/37 27/66 35/77 0,330 (0.728) Double solenoid 2, (vers. 89) 16/16 17/17 21/21 24/24 0,440 (0.970) 5/3 2, (vers. 89) 17/25 21/36 25/61 30/68 0,440 (0.970) 2 x 3/2 2, (vers. 89) 15/25 0,350 (0.772) (1.433) 0,650 (1.433) (2.293) 1,040 (2.293) (3.241) 1,470 (3.241) 0,550 (1.213) 0,950 (2.094) 1,350 (2.976) 0,650 1,040 1,470 (1.433) (2.293) (3.241) 0,650 1,040 1,470 (1.433) (2.293) (3.241) Function Min pilot pressure [bar] (psi) ISO 1 ISO 2 ISO 3 ISO 4 5/2 Single solenoid 3,0 (44) 3,0 (44) 3,0 (44) 3,0 (44) 5/2 Double solenoid 1,5 (22) 1,5 (22) 1,5 (22) 1,5 (22) 5/3 3,0 (44) 3,0 (44) 3,0* (44) 3,0 (44) 2 x 3/2 3,5 (51) 5/2 Single solenoid air return 1,3 (19) 2,7 (39) 1,5 (22) 1,5 (22) * 5/3 supplied center: Pilot pressure 3 bar (44 psi) only for externally piloted valve. 14

15 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 1 4, 30 mm pilot valves as per CNOMO for connector, no manual override Technical Data Standard ISO Working pressure max. 16 bar (232 psi) - Internally fed pilots min. See table - Externally fed pilots min. 1 bar ( 15 psi) External pilot feeding max. 16 bar (232 psi) min. See table Ambient temperature range, solenoid Life expectancy -15 C to +50 C (+5 F to +122 F) 50 million cycles as per PNEUROP 6611 class 2 Materials Valve body Aluminum, painted gray Subbases Aluminum Seals Buna N Wear rings Ultra high molecular weight polyethylene Technical information 30 mm pilot valve as per CNOMO, pin distance 18 mm, for connector as per Form A DIN Delivered without connector. Voltage, type of current 24 V DC or 230 V AC Duty cycle 100% Voltage class IP 65 (NEMA 65) Pilot valve without manual override. The coil of the pilot is orange. The valves can be used as replacement valves for complete valve manifolds with el. version 90 or 92. Function Flow at 6 bar (87 psi) and ΔP (pressure drop) 1 bar (15 psi), Qn l/min (Cv) C-value ISO 1 ISO 2 ISO 3 ISO 4 ISO 1 ISO 2 ISO 3 ISO 4 5/ (1.4) 2700 (2.7) 4800 (4.8) 6000 (6.0) 5,2 10,8 18,9 24,5 5/ (1.1) 2100 (2.1) 4100 (4.1) 5000 (5.0) 4,3 8,9 14,1 15,5 2 x 3/2 950 (0.95) 3,2 Function Inrush/ holding power Switching time, t F /t E [ms] Weight [kg] (lbs) [W] ISO 1 ISO 2 ISO 3 ISO 4 ISO 1 ISO 2 ISO 3 ISO 4 Single solenoid 6,7 15/28 17/40 24/66 33/77 0,330 (0.728) 0,550 (1.213) 0,950 (2.094) 1,350 (2.976) Double solenoid 6,7 13/13 14/14 18/18 21/21 0,440 (0.970) 0,650 (1.433) 1,040 (2.293) 1,470 (3.241) 5/3 6,7 14/28 17/36 22/61 26/68 0,440 (0.970) 0,650 (1.433) 1,040 (2.293) 1,470 (3.241) 2 x 3/2 6,7 12/29 0,350 (0.772) ( ) ( ) ( ) Function Min. pilot pressure [bar] (psi) ISO 1 ISO 2 ISO 3 ISO 4 5/2 Single solenoid 3,0 (44) 3,0 (44) 3,0 (44) 3,0 (44) 5/2 Double solenoid 1,5 (22) 1,5 (22) 1,5 (22) 1,5 (22) 5/3 3,0 (44) 3,0 (44) 3,0* (44) 3,0 (44) 2 x 3/2 3,5 (51) 5/2 Single solenoid air return 1,3 (19) 2,7 (39) 1,5 (22) 1,5 (22) * 5/3 supplied center: Pilot pressure 3 bar (44 psi) only for externally piloted valve. 15

16 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 1 4, 30 mm pilot valves as per CNOMO for connector, no manual override 5/2 Single solenoid with spring return 5/2 Double solenoid and 5/3 valves 5/2 Single solenoid with air return Size A B C F G H J T U ISO , ISO ISO ISO

17 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Single valves, ISO 3, DVV3 pilot with central M12 connection Technical Data Standard ISO Working pressure max. 10 bar (145 psi) - Internally fed pilots min. See table - Externally fed pilots min. 1 bar ( 15 psi) External pilot feeding max. 12 bar (174 psi) min. See table Ambient temperature range, solenoid -10 C to +60 C (50 F to 140 F) Materials: Valve body Aluminum, painted gray Seals NBR Wear rings Ultra high molecular weight polyethylene Technical information 15 mm pilot, type DVV3 with central M12 connector. Delivered without connector. Voltage, type of current 24 V DC, power transformer should not be used Duty cycle 100% Voltage class IP 65 with connector Pilot valve with locking/non locking manual override. Function Flow at 6 bar (87 psi) and ΔP (pressure drop) 1 bar (15 psi), Qn l/min (Cv) 5/2 Single solenoid, spring return 5/2 Single solenoid air return 5/2 Double solenoid C-value Power consumption [W] Switching time, t F t E Min. pilot pressure [ms] [bar] (psi) Weight [kg] (lbs) ,9 0,35 22/54 2,8 (40) 0, ,9 24/48 2,3 (33) 0, ,9 0,35 16/16 1,7 (24) 0,896 5/ ,1 0,35 24/24 3,2 (46) 0,900 M12 connector Pin 5 pin M12 connector 1 Not assigned 2 U B solenoid V for solenoid 4 U B solenoid 14 5 Not assigned 17

18 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Electrical connectors for 15 mm pilot valve Electrical connector for 15 mm pilot valve (version 50) Voltage Fig. Distance between pins Cable LED¹) Form Power consumption [W] Weight [kg] (lbs) Part no. 24 V AC/DC ²) m C, DIN ,25 0,110 (0.243) V AC/DC 2 8 C, DIN ,25 0,012 (0.026) V AC/DC 8 C, DIN ,25 0,012 (0.026) = included. = not included. Protection class IP 65. Ambient temperature range: fig. 1: 5 C to +70 C (23 F to +158 F), fig. 2: 40 C to +90 C ( 40 F to 194 F). The connector can be turned 4 x 90. ¹) Green with built-in safety circuit. ²) No. of conductors 3x0,75 mm².(19 AWG) Figure 1 Figure 2 18

19 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Electrical connectors for 22 mm pilot valve Electrical connector for 22 mm pilot valve Voltage Fig. Distance between pins Cable LED ¹) Form Power consump. [W] Weight [kg] (lbs) Part no. max. 250 V AC/DC 1 11 PG 9 B 0,020 (0.044) V AC/DC 2 11 PG 9 B 0,20 0,020 (0.044) V AC/DC 2 11 PG 9 B 0,25 0,020 (0.044) V AC/DC ²) m B 0,40 0,145 (0.320) V AC/DC ³) m B 0,25 0,120 (0.265) max. 250 V AC/DC 4 11 PG 9 B 0,020 (0.044) V AC/DC 5 11 PG 9 B 0,25 0,020 (0.044) V AC/DC 5 11 PG 9 B 0,40 0,020 (0.044) = included. = not included. Protection class IP 65 Ambient temperature range 20 C to +80 C ( 4 F to +176 F) The connector can be turned through 180. ¹) Green with built-in safety circuit. ²) No. of conductors 3x0,75 mm² (19 AWG) (standard color marked). ³) No. of conductors 2x0,75 mm² (19 AWG) (both conductors black, marked 1 and 2). Figures 1 and 2 Figures 3 and 4 Figure 5 19

20 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Electrical connectors for 30 mm pilot valve Electrical connector for 30 mm pilot valve (Version 70-92) Voltage Fig. Distance between pins Cable LED¹) Form Power consump. [W] max. 250 V AC/DC 1 18 PG 9 A, DIN V AC/DC 2 18 PG 11 A, DIN V AC/DC 2 18 PG 11 A, DIN V AC ²) m A, DIN V DC ³) m A, DIN V AC/DC ²) m A, DIN = included. = not included. Protection class IP 65. The connector can be turned through 4 x 90. Ambient temperature range 20 C to +80 C ( 4 F to +176 F) (for : 5 C to +70 C (23 F to158 F)). ¹) Green with built-in safety circuit. ²) No. of conductors 3x0,75 mm²(19 AWG) (standard color marked). ³) No. of conductors 2x0,75 mm² (19 AWG) (both conductors black, marked 1 and 2). Weight [kg] (lbs) Part no. 0,025 (0.055) ,40 0,025 (0.055) ,25 0,025 (0.055) ,40 0,150 (0.331) ,25 0,125 (0.276) ,25 0,125 (0.276) Figures 1 and 2 Figures 3 and 4 Electrical module IP 67, 14-pole multicore cable 0,34 mm² (22 AWG) (version 32) Version Cable length Cable material Part no. 10 outputs, 3-pole female 3 m PVC outputs, 3-pole female 10 m PVC outputs, 3-pole female 25 m PVC outputs, 3-pole female 50 m PVC

21 3/2, 5/2 and 5/3 Valves, Series 581 Ordering key single valves, Air Pilot versions How to order single valves This is a key to how to build the ordering number of a specific valve or to identify an existing valve. The valves, with complete ordering numbers, can also be found under section "Single valves". Ordering Key ISO size / Connection ports Valve body/function 1 1/4" and 3/8" NPT, G1/8, G 1/4, Ø 6-8 mm 1 5/2, Single air pilot, spring return 2 3/8" and 1/2" NPT, G1/4, G3/8, Ø 8 mm 2 5/2, Double air pilot 3 1/2" and 3/4" NPT, G3/8,- G1/2 3 5/2, Double air pilot with manual override (air pilot only) 4 1" NPT, G1/2, G3/4, G 1 4 5/3, Closed center 5 5/3, Exhaust open center 6 5/2, Single air pilot, air return (differential spool) 7 5/2, Supplied center 8 2 x 3/2 (only ISO 1, without flow controls) 581 XXX XXX 0 Control version Flow controls Coil El. connector 3 Air pilot 0 Without 0 Without coil 0 Without el. connector 4 Logic, int. signal processing (ISO 2-4) 1 With Symbol Description Example of a symbol denoting built-in flow control units. Completely assembled and tested custom valve manifolds can be specified using our on-line configurator at 21

22 3/2, 5/2 and 5/3 Valves, Series 581 Single valves, ISO 1-4, Air Pilot, ATEX certification Technical Data Standard ISO Working pressure 1 to 16 bar ( 15 to 232 psi) Control pressure max. 16 bar (232 psi) min. See table Ambient temperature range -20 C to +70 C (-4 F to +158 F) Pressure medium Air, lubricated or non-lubricated Life expectancy 50 million cycles Material: Valve body Aluminum, painted blue Subbase Aluminum Seals Nitril Butadien Rubber Wear rings Ultra high molecular weight polyethylene The valve is designed to be mounted on subbases. According to the requirements from the explosion protection directive 94/9/EG (ATEX 95) and to an internal danger assessment report subject to EN , the valves 581xx30000, 581xx31000 can be used in Ex areas zones 2 and 22 (category 3G/D) as well as in zones 1 and 21 (category 2G/D). Technical Data ISO 1 ISO 2 ISO 3 ISO 4 Flow at 6 bar (87 psi) Qn l/min.(cv) 5/ (1.4) 2700 (2.7) 4800 (4.8) 6000 (6) and Δp (pressure drop) Qn l/min.(cv) 5/ (1.1) 2100 (2.1) 4100 (4.1) 5000 (5) 1 bar (15 psi) Qn l/min.(cv) 2 x 3/2 950 (0.95) ( ) ( ) ( ) C-value 5/2 5,2 10,8 18,9 24,5 5/3 4,3 8,9 14,1 15,5 2 x 3/2 3,2 Weight Valve, kg (lbs) 0,22 (0.49) 0,45 (0.99) 0,85 (1.87) 1,25 (2.76) Function Min. pilot pressure ISO 1 ISO 2 ISO 3 ISO 4 5/2 Single air pilot 3,0 3,0 3,0 3,0 5/2 Double air pilot 1,5 1,5 1,5 1,5 5/3 3,0 3,0 3,0 3,0 2 x 3/2 3,5 5/2 Single air pilot air return 1,3 2,7 1,5 1,5 Version Version 00 Air piloted valves ISO 1 4. Pressure operated valve for internal signal processing with logic valves ISO 2 4. Valve manifolds with assembled logic functions available on request. Please contact your nearest Bosch Rexroth office. 22

23 3/2, 5/2 and 5/3 Valves, Series 581 Single valves, ISO 1-4, Air Pilot, ATEX certification Dimensions valves * Alternative sub-base. ** Assembly height depends on which sub-base is chosen. With manual override. With air return (differential spool). Size A B C D E F G H J K L M ISO ISO ISO ISO

24 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Subbases and manifolds-npt, ISO size 1 Part Number R * - Manifold Station Segment** Part Number R * - End Plates (Includes both ends)** *Manifold gaskets included. **All hardware is included. Part No. R Port Size 1/4" R Port Size 3/8" (shown) Port Size 1/8" BSPP R Silencer, 3/8 NPT 24

25 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Subbases and manifolds-npt, ISO size 2 Part Number R Port Size 1/2" Part Number R Port Size 3/8" (shown) Part Number R * - Manifold Station Segment** Part Number R End Plates (Includes both ends)** R Silencer, 3/8 NPT 25

26 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Subbases and manifolds-npt, ISO size 3 Part No. R port Size 3/4" NPT R port Size 1/2" NPT port Size 1/2" BSPP R port Size 3/4" BSPP Part Number R Manifold Station Segment (1/2" NPT) (Order Part Number R for 3/4" Delivery Ports) Part Number R End Plates (Includes both ends) 26

27 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Subbases and manifolds-npt, ISO size 4 only ISO SIZE IV Bottom & Side Ported Manifolds ISO SIZE IV Bottom & Side Ported Manifolds Dimensions IN mm c of Base L 1/8 Inch Pilot Port B 1-1/4 Inch NPSM A 1 Inch 1, 3, 5 Ports C 3/4 Inch Ports G + (C x n) n = Number of Stations 3/4 Inch 2, 4 Bottom Ports (2) External 1/8 Inch Pilot Ports (2) mtg. holes 9 (.34) D 1 Inch 1, 3, 5 Bottom Ports E F Part No. R Manifold Station Segment (3/4" NPT) Part No. R End Plate Kit Part No. R Manifold Isolation Disc Blanking Plate Kit - Size IV Allows for valve to be added later. Kit includes plate, gasket and screws. Part No Part Number R Port Size 1" 27

28 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Sub-bases for single valves, ISO 1 4, metric Sub-bases, bottom ported, threaded connection ports or push-in fittings *) Alternative valve Size Part no. Port A Port B C D E F G H K L M N P R S Weight [kg] (lbs) ISO G 1/8 G 1/ , ,4 40 0,11 (0.243) ISO Ø 6 Ø , ,4 40 0,13 (0.287) ISO G 1/4 G 1/ ,4 52 0,19 (0.419) ISO Ø 8 Ø ,4 52 0,22 (0.485) ISO G 3/8 G 1/ ,4 65 0,39 (0.860) ISO G 1/2 G 1/ , ,4 76 0,63 (1.389) Material: Aluminum, black painted. The base is available with threaded connection ports or alt. with push-in fittings for plastic tube. Sub-bases, side ported, threaded connection ports or push-in fittings * Alternative valve Size Part no. Port A Port B C D E F G H K L M N R S T U V Weight [kg] (lbs) ISO G 1/8 G 1/ , , ,11 (0.243) ISO G 1/4 G 1/ ,5 11, , ,17 (0.375) ISO Ø 6 Ø , , ,13 (0.287) ISO Ø 8 Ø ,5 11, , ,22 (0.485) ISO G 1/4 G 1/ , ,5 0,19 (0.419) ISO G 3/8 G 1/ , ,32 (0.705) ISO Ø 8 Ø , ,5 0,21 (0.463) ISO G 3/8 G 1/ , ,5 0,39 (0.860) ISO G 1/2 G 1/ , , ,5 0,21 (0.463) Material: Aluminum, black painted. The sub-base is available with threaded connection ports or alt. with push-in fittings for plastic tube. 28

29 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Sub-bases for single valves, to VDMA-standard, ISO 1 4, Form A, side ported Sub-bases VDMA, side ported Size Part no. B1 H1 H2 H3 H4 H5 D1 D2 D3 L1 L2 L3 L4 L5 L6 Weight [kg] (lbs) ISO ,5 21,5 23,5 5,5 G 1/4 G 1/ ,18 (0.397) ISO ,6 G 3/8 G 1/ ,27 (0.595) Material: Aluminum. Sub-bases VDMA, side ported Size Part no. B1 H1 H2 H4 H5 D1 D2 D3 L1 L2 L3 L4 L5 L6 L7 Weight [kg] (lbs) ISO ,6 G 1/2 G 1/ ,35 (0.772) ISO G 3/4 G 1/ ,44 (0.970) ISO G 1 G 1/ , ,00 (2.205) 29

30 3/2, 5/2 and 5/3 Valves, Series 581 How to order valve manifolds for self assembly (metric) How to order valve manifold for self assembly How to order: The ordering of parts for valve manifolds is made in three steps: 1) Choose your valves 2) Choose manifold subbases 3) Choose fittings STEP 1: Choose valves The valves can be chosen in two ways: a) Choose the valves with the help of our "Ordering key for single valves". b) Choose the valves from section "Single valves". There the complete numbers of the valves can be found. STEP 2: Choose manifold sub-bases There are four different manifold systems available: a) Bottom ported, ISO 1 4. b) Bottom ported according to VDMA standard, ISO 1 4. c) Side ported, ISO 1 2. d) Mecproof concept, ISO 1 2. a) Bottom ported sub-bases Sub-base Ported end piece Blank end piece Sub-base for separate inlet port Group* Size Dim. Part no. Part no. Part no. Part no. A ISO 1 G 1/ A ISO 1 Ø 6*** B ISO 1 G 1/ B ISO 1 Ø 8*** B ISO 2 G 1/ B ISO 2 Ø 8*** C ISO 2 G 3/ C ISO 3 G 3/ D ISO 3 G 1/ D ISO 4 G 1/ * Sub-bases in the same group can be assembled together without using transition plates. ** Sub-base can be connected in ports 3 and 5. *** Integrated push-in fittings for tube 6 mm dia. and 8 mm dia. respectively. Note! All products delivered complete with sealings and screws. Symbol Transition plate from to Part no. ISO 1 G 1/8 ISO 2 G 1/ ISO 1 G 1/8 ISO 2 3 G 3/ ISO 1 G 1/8 ISO 3 4 G 1/ ISO 1 2 G 1/4 ISO 2 3 G 3/ ISO 1 2 G 1/4 ISO 3 4 G 1/ Delivered with screws. ISO 2 3 G 3/8 ISO 3 4 G 1/

31 3/2, 5/2 and 5/3 Valves, Series 581 How to order valve manifolds for self assembly (metric) Symbol Blanking kit for / sub-base Part no , , , , , , Delivered as a 3 part set. b) Rear ported manifold according to VDMA standard Size End pieces Sub-base Stopper (blanking plug) 1, 3 2 ISO ISO ISO ISO End pieces delivered in pairs. Sub-bases and end pieces are delivered complete with O-rings, hexagon bolts and nuts. Stopper is delivered complete with O-rings. c) Side ported manifold Size Dim. Manifold base A Ported end pieces* B Transition piece ISO 1 to ISO 2 Blanking plug** ISO 1 G 1/ ISO 2 G 3/ * Delivered in pairs. Must be drilled through for side/bottom connection. ** Only for channel 1. Note! All products delivered complete with sealings and screws. STEP 3: Choose fittings The fittings can be found in the on-line catalog or our Accessories catalog. 31

32 3/2, 5/2 and 5/3 Valves, Series 581 How to order valve manifolds for self assembly (metric) Ordering example For this case a valve manifold ISO 1 is needed with four single air pilot valves, two double air pilot valves and one 5/3 valve closed central position. The subbases should have connection ports 2 and 4 G 1/4 bottom ported. The valves should be pressure actuated. Flow controls units in the valves are required. Silencers are needed in port 3 and 5. For air supply 12 mm dia. tube and for working lines 8 mm dia. tubes. STEP 1: Choose valves From the Product overview the Single valves are selected and the following valves are chosen: 4 pcs pcs pce STEP 2: Choose manifold subbases From a) bottom ported subbases the following parts are selected: 7 pcs pce pce STEP 3: Choose fittings From the on-line catalog or our Accessories catalog the following fittings are chosen: 2 pcs pce pcs

33 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting, ISO 1 4 (metric) Valve manifold, bottom ported Subbases for manifolds, bottom ported. Ported end pieces and blank end pieces. Valve manifold for ISO 1, G 1/4 and ISO 2, G 3/8 can be mounted in a cabinet with a simplified system, "Mecproof". For Mecproof see our on-line catalog. Materials: Aluminum, painted Note. Channel 1 must be sealed with a blanking kit if a manifold is to be supplied with different pressures/vacuum. Sub-base 1 Group* Size Dim. Part no. Weight [kg] (lbs) Ported end piece 2 Part no. Weight [kg] (lbs) Blank end piece 3 Part no. Weight [kg] (lbs) Sub-base** for separate inlet port 1 4 Part no. Weight [kg] (lbs) A ISO 1 G 1/ ,14 (0.31) ,15 (0.33) ,08 (0.18) ,14 (0.31) A ISO 1 Ø ,16 (0.35) ,15 (0.33) ,08 (0.18) B ISO 1 G 1/ ,27 (0.60) ,26 (0.57) ,13 (0.29) ,27 (0.60) B ISO 1 Ø ,30 (0.66) ,26 (0.57) ,13 (0.29) B ISO 2 G 1/ ,27 (0.60) ,26 (0.57) ,13 (0.29) ,27 (0.60) B ISO 2 Ø ,30 (0.66) ,26 (0.57) ,13 (0.29) C ISO 2 G 3/ ,52 (1.15) ,39 (0.86) ,24 (0.53) ,52 (1.15) C ISO 3 G 3/ ,52 (1.15) ,39 (0.86) ,24 (0.53) D ISO 3 G 1/ ,70 (1.54) ,55 (1.21) ,30 (0.66) D ISO 4 G 1/ ,76 (1.68) ,55 (1.21) ,30 (0.66) * Sub-bases in the same group can be assembled together without using transition pieces. ** Sub-base can be connected in ports 3 and 5. Transition pieces for manifolds of different dimensions Transition from Transition to Part no. Thickness [mm] Weight [kg] (lbs) ISO 1 G 1/8 ISO 2 G 1/ ,17 (0.38) ISO 1 G 1/8 ISO 2 3 G 3/ ,30 (0.66) ISO 1 G 1/8 ISO 3 4 G 1/ ,50 (1.10) ISO 1 2 G 1/4 ISO 2 3 G 3/ ,32 (0.71) ISO 1 2 G 1/4 ISO 3 4 G 1/ ,55 (1.21) ISO 2 3 G 3/8 ISO 3 4 G 1/ ,63 (1.39) Material: Aluminum, painted. Delivered with screws. Blanking kit for valve manifolds Blanking kits are used when valves in a manifold are to be supplied with different pressures. The inlet and exhaust channels are divided into two sections by means of a blanking kit. These can then be supplied separately from two ported end pieces. Subbases with independent supply ports are available in ISO 1 and 2. This allows second pressure to be connected to a manifold. Material: Brass Delivered as a 3 part set. 33

34 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting, ISO 1 4 (metric) For manifold sub-base Part no. Weight [kg] (lbs) , ,012 (0.026) , , , ,017 (0.037) , ,020 (0.044) , ,029 (0.064) Dimensions, connections bottom ported (580) * n = No. of sub-bases. ** Alternative connection ports, plugged. *** Only on manifolds with separate inlet. **** Sub-base can also be connected to ports 3 and 5. Dimensions T1, T2, T3, U1, U2 and U3 are only valid for electrically operated valves. Size Outlet A Inlet B Exhaust C Contr. port D E F G H J K L M N ISO 1 G 1/8 G 1/4 G 1/4 G 1/ ,5 9,5 29,5 14, ISO 1 G 1/4 G 3/8 G 3/8 G 1/ ,5 26, ISO 2 G 1/4 G 3/8 G 3/8 G 1/ , ISO 2 G 3/8 G 1/2 G 1/2 G 1/ ISO 3 G 3/8 G 1/2 G 1/2 G 1/ ISO 3 G 1/2 G 3/4 G 3/4 G 1/ , ISO 4 G 1/2 G 3/4 G 3/4 G 1/ , , ISO 1 Ø 6 G 1/4 G 1/4 Ø ,5 9,5 29,5 14, ISO 1 Ø 8 G 3/8 G 3/8 Ø ,5 26, ISO 2 Ø 8 G 3/8 G 3/8 Ø , Size Outlet A Inlet B Exhaust C Contr. port D P Q R S V X Z AA ISO 1 G 1/8 G 1/4 G 1/4 G 1/ , ,4 7 8 ISO 1 G 1/4 G 3/8 G 3/8 G 1/ , ISO 2 G 1/4 G 3/8 G 3/8 G 1/ , ISO 2 G 3/8 G 1/2 G 1/2 G 1/ ,4 10 ISO 3 G 3/8 G 1/2 G 1/2 G 1/ ,4 10 ISO 3 G 1/2 G 3/4 G 3/4 G 1/ ,4 10 ISO 4 G 1/2 G 3/4 G 3/4 G 1/ ,4 10 ISO 1 Ø 6 G 1/4 G 1/4 Ø , ,4 7 ISO 1 Ø 8 G 3/8 G 3/8 Ø ,4 8 ISO 2 Ø 8 G 3/8 G 3/8 Ø ,

35 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting to VDMA-standard, ISO 1 4 (metric) Valve manifold, bottom ported VDMA Subbases for manifold mounting, bottom ported. Ported end pieces and blank end pieces. Material: Aluminum Subbases and end pieces are delivered complete with O-rings, hexagon bolts and nuts. Stopper is delivered complete with O-ring. Référence Size End pieces*) form DA and DB 1, 4 Sub-base form C 2 Stopper 3 ISO ISO ISO ISO *) Delivered in pairs. 1 = End piece DA. 2 = Sub-base C. 3 = Stopper for channels 1, 3 and 5 with double pressure operation. 4 = End piece DB. Size D1 D2 D3 D4 D5 X1 X2 Dimension X depends on no. of sandwich plates ISO 1 G 3/8 G 1/4 7 G 1/ (no. x 43) ISO 2 G 1/2 G 3/8 9 G 1/ (no. x 56) ISO 3 G 1 G 1/2 12 G 1/ (no. x 71) ISO 4 G 1 G 3/4 12 G 1/ (no. x 82) 35

36 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting to VDMA-standard, ISO 1 4 (metric) Sub-base, form C Size Part no. B1 B2 B3 D1 D2 D3 D4 D5 D6 H1 H2 Weight [kg] (lbs) ISO G 1/4 15 5,5 G 1/8 M5 22, ,235 (0.518) ISO G 3/8 18,5 6,6 G 1/8 M6 28, ,340 (0.750) ISO G 1/ G 1/8 M ,670 (1.477) ISO G 3/ G 1/8 M8 44, ,810 (1.786) Size Part no. H3 H4 H5 H6 H7 H8 L1 L2 L3 L4 L5 T1 Weight [kg] (lbs) ISO ,5 7,5 1, ,235 (0.518) ISO ,340 (0.750) ISO ,7 0,670 (1.477) ISO ,7 0,810 (1.786) Material: Aluminum. Delivered in pairs. 36

37 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting to VDMA-standard, ISO 1 4 (metric) Stopper for VDMA sub-bases Size Part no. Weight [kg] (lbs) A D D1 D2 ISO ,008 (0.018) 6,2 12,2 14,8 16,5 ISO ,011 (0.024) 6,2 15,7 18,3 23 ISO ,105 (0.231) 6,9 25,1 27,7 30 Material: Brass. Complete with O-rings. E End pieces DA and DB, for sub-base form C Size Part no. B1 B2 B3 D1 D2 D3 D4 H1 Weight [kg] (lbs) ISO G 3/8 5,5 7 22,1 46 0,20 (0.44) ISO G 1/2 6,6 9 28,7 47 0,31 (0.68) ISO G ,59 (1.30) ISO G ,1 58 0,71 (1.57) Size Part no. H2 H3 H4 L1 L2 L3 L4 L5 T1 Weight [kg] (lbs) ISO ,20 (0.44) ISO ,5 2 0,31 (0.68) ISO ,7 0,59 (1.30) ISO ,7 0,71 (1.57) Material: Aluminum. Delivered in pairs. 37

38 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting to VDMA-standard, ISO 1 4 (metric) Angle plate for converting the sub-base to side ported, form C Size Part no. Weight [kg] (lbs) B H L D1 D2 ISO ,40 (0.88) G 1/4 5,5 ISO ,85 (1.87) G 1/2 9 Material: Aluminum. Complete with O-ring and screws. Transition piece for joining different ISO sizes Size Part no. Weight [kg] (lbs) B H L ISO 1 to ISO ,300 (0.661) ISO 1 to ISO ,825 (1.819) Material: Aluminum. Complete with O-ring and bushings. 38

39 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting to VDMA-standard, ISO 1 4 (metric) Sandwich plate for separate air supply Size Part no. Weight [kg] (lbs) ISO ,380 (0.838) Material: Aluminum. Complete with O-rings and screws. 39

40 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting to VDMA-standard, ISO 1 4 (metric) Dimensions, connections bottom ported VDMA *) n = No. of sub-bases. Dimensions T1, T2, T3, U1, U2 and U3 are only valid for electrically operated valves series 581. Size Outlet A Inlet B Exhaust C Contr. port D E G H1 H2 H3 J K L ISO 1 G 1/4 G 3/8 G 3/8 G 1/ ,5 ¹) ISO 2 G 3/8 G 1/2 G 1/2 G 1/ ¹) ISO 3 G 1/2 G 1 G 3/4 G 1/ ,5 29,5 46 ¹) ISO 4 G 3/4 G 1 G 3/4 G 1/ ¹) ¹) See dimensions table for end plates. Size Outlet A Inlet B Exhaust C Contr. port D M N P Q R S V X Z ISO 1 G 1/4 G 3/8 G 3/8 G 1/ ,5 24, ISO 2 G 3/8 G 1/2 G 1/2 G 1/ ISO 3 G 1/2 G 1 G 3/4 G 1/ ,5 38, ISO 4 G 3/4 G 1 G 3/4 G 1/

41 3/2, 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting, ISO 1 2 (metric) Valve manifolds, connection ports 2 and 4, side ported Size Dim. Manifold base A Part no. Weight [kg] (lbs) Ported end pieces* B Part no. Weight [kg] (lbs) Transition piece ISO 1 to ISO 2 Part no. Weight [kg] (lbs) Blanking plug** Part no. Weight [kg] (lbs) ISO 1 G 1/ ,23 (0.51) ,26 (0.57) ,25 (0.55) ( ) ISO 2 G 3/ ,37 (0.82) ,46 (1.01) ( ) * Delivered in pairs. Must be drilled through for side/bottom connection. When delivered in a complete unit the side ports next to valve position no. 1 will be open. **Only for channel 1. If also channels 3 and 5 should be sealed, use an end piece. Sub-base for direct mounting of soft start valve not available. Material: Aluminum Size A B B1 C D E F G J R K L M N O P S ISO 1 2 x G 1/4 3 x G 3/8 3 x G 1/4 5, n¹) x ISO 2 2 x G 3/8 3 x G 1/2 3 x G 3/8 6,5 14, n¹) x ¹) n = No. of valves. 41

42 3/2, 5/2 and 5/3 Valves, Series 581 Sub-bases for manifold mounting, ISO 1 2 (metric) Dimensions, connections side ported Dimensions T1, T2, T3, U1, U2 and U3 are only valid for electrically operated valves. Size A B/B1 C D E F G H J R K M N O P S ISO 1 2 x G 1/4 3 x G 3/8 5,5 11 5, ISO 2 2 x G 3/8 3 x G 1/2 6,5 14, n* = No. of sub-bases. 42

43 3/2, 5/2 and 5/3 Valves, Series 581 Maintenance plate, ISO 1 3 Maintenance plate Mounted between valve and subbase A maintenance plate is used when replacing individual valves, in a manifold system, or replacing a cylinder while the system is still operating. The plate has two positions: 0. Maintenance position, flow is minimal and valve can be exchanged. 1. Open position, normal operation full flow in the system. The low flow in the maintenance position allows slow pressurising when the valve is mounted. The positions are locked with a split cotter. The maintenance plate cannot be used as a cut-off valve. To maintain the manifold the air supply must be turned off. Material: Aluminum, black anodized. Size Pressure range [bar] (psi) Part no. ISO 1 1 to 10 ( 15 to 145) ISO 2 1 to 10 ( 15 to 145) ISO 3 1 to 10 ( 15 to 145) Size A1 A2 B C ISO ISO ISO

44 3/2, 5/2 and 5/3 Valves, Series 581 Sandwich regulator, ISO 1 3 Sandwich regulator for assembling between valve and sub-base Valve type Self relieving diaphragm Standard ISO 5599/1 sizes 1, 2 and 3 Max. primary pressure 16 bar (232 psi) Secondary pressure range 0,5 12 bar (7 174 psi) Flow at 6 bar (87 psi) and Qn NI/min. see table Δp (pressure drop) 1 bar (15 psi) Ambient temperature range +5 C to +50 C (+41 F to +122 F) Medium Air, lubricated or non-lubricated Materials: Body Zinc Seals Buna N Technical information The regulator has a built-in return function which gives full return flow. Symbol Size Port Weight ISO Regulation lbs. (kg) Gauge Part No. Note (2.6) w/gauge ) (3.7) w/gauge ) (4.9) w/gauge ) (2.6) w/gauge ) (3.7) w/gauge ) (4.9) w/gauge ) (2.6) w/gauge ) (3.7) w/gauge ) (4.9) w/gauge ) (3.5) w/gauge ) (5.3) w/gauge ) (7.1) w/o gauge ) 1) Scope of delivery incl. gauge, seal, and mounting screws 2) Scope of delivery incl. seal and mounting screws, and includes built-in free flow reverse check valves Pressure Gauge Pressure range psi (bar) Part no. 40mm dia., R1/8 thread (0-10) B C Size A in. (mm) B in. (mm) C in. (mm) ISO (45) 7.8 (198) 11.5 (292) ISO (60) 10.1 (256) 14.1 (359) ISO (67) 11.2 (285) 16.4 (416) 44

45 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Spare parts Part no Protective plug For electrical connection module. (10 pcs). Extension cable (version 32) for 8 mm "snap-in" connector Version Cable length Part no. 1 x 3 pin connector (male) 3 m*) x 3 pin connector (female/male) 1 m x 3 pin connector (female/male) 5 m *) Seals for pilot valve connector 15 and 22 mm, are supplied. Double solenoid control Version Double solenoid for pilot valves (vers , 50-57). Label holder and screws are included. Part no Note! The control is only intended to be used for setting the machine (6 controls per kit). Mounting pins with flow control for flow regulation in ports 3 and 5 ISO Part no Depending on the order, series 581 directional control valves are delivered with mounting pins with or without a flow control - see order code. Mounting pins without a flow control are replaced by pins with a flow control to install an integrated throttling. Mounting pins are delivered in sets of two. 45

46 2 x 3/2, 5/2 and 5/3 Valves, Series 581 (DIN ISO ) ISO 1-4 Spare parts Mounting pins ISO Part no Depending on the order, series 581 directional control valves are delivered with mounting pins with or without a flow control - see order code. Mounting pins with a flow control are replaced by pins without a flow control to remove an integrated throttling. Mounting pins are delivered in sets of two. Cover plug for flow controls ISO Part no pieces in each package. Pilot valve 15 mm, with coil 24 V DC Version Protection Effect Notes Part no. 32 IP 67/UL ,2 W with encaps. cable ,20 m 32 IP 67/UL ,2 W with encaps. cable ,35 m 32 IP 67/UL ,2 W with encaps. cable ,50 m 32 IP 67/UL ,2 W with encaps. cable ,70 m 32 IP 67/UL ,2 W with encaps. cable ,00 m 50 IP 65 2,0 W for connector pin distance 8 mm Pilot valve 22 mm, without coil Version Notes Part no , 69 5 W, suitable for all voltages

47 3/2, 5/2 and 5/3 Valves, Series 581 Spare parts Coil for 22 mm pilot valve, IP 65 Version Voltage/Power Notes Part no V DC 5 W V AC, 10/8 VA V AC, 10/8 VA V AC, 10/8 VA V DC V DC V DC V DC V AC V DC EEx m II T V AC EEx m II T Pilot valve 30 mm as per CNOMO, with coil Version Voltage Manual override Dimensions Part no. [mm] V DC / 42 V AC Non-locking 30 x ,7 W V AC, 6,7 W Non-locking 30 x V AC, 6,7 W Locking/non-locking 30 x V DC 2 W Locking/non-locking 30 x V DC 6,7 W None 30 x V AC, 6,7 W None 30 x V DC 6 W Non-locking 30 x V AC, 10 VA Non-locking 30 x V AC, 10 VA Non-locking 30 x Valve covers Electrically operated valves Including seals and screws. Version Pilot width Voltage/Power Notes ISO Size For valve function Part no Without pilot valve 1 Single solenoid Without pilot valve 1 Double solenoid, 5/3, 2 x 3/ Without pilot valve 2 Single solenoid Without pilot valve 2 Double solenoid, 5/3, 2 x 3/ , V DC-230 V AC With pilot valve, without coil 1 Single solenoid , V DC-230 V AC With pilot valve, without coil 1 Double solenoid, 5/3, 2 x 3/ , V DC-230 V AC With pilot valve, without coil 2 Single solenoid , V DC-230 V AC With pilot valve, without coil 2 Double solenoid, 5/3, 2 x 3/ , V DC-230 V AC With pilot valve, without coil 3 Single solenoid , V DC-230 V AC With pilot valve, without coil 3 Double solenoid, 5/ , V DC-230 V AC With pilot valve, without coil 4 Single solenoid , V DC-230 V AC With pilot valve, without coil 4 Double solenoid, 5/ Without pilot valve 1 For all functions Without pilot valve 2 For all functions Without pilot valve 3 For all functions Without pilot valve 4 For all functions

48 3/2, 5/2 and 5/3 Valves, Series 581 Spare parts Valve cover seal (between cover and valve body) Size Operating method Part no. ISO ISO 2 Electrically operated ISO ISO Valve body seal (between valve body and sub-base) Size Part no. ISO ISO ISO ISO

49 3/2, 5/2 and 5/3 Valves, Series 581 Spare parts Valve body (wear parts kit) Solenoid versions The valve housing must be equipped with mounting pins either with or without a flow control as shown below. Delivered completely assembled. ISO size For valve function Part no. Valve body Part no. Mounting pins Part no. Mounting pins with flow control Single solenoid, spring return Double solenoid Double solenoid, with manual override Double solenoid*, with diff. piston 14> /3 Closed center /3 Exhaust open center /3 Supplied center x 3/2 In preparation Single solenoid, spring return Double solenoid Double solenoid, with manual override Double solenoid*, with diff. piston 14> /3 Closed center /3 Exhaust open center /3 Supplied center Single solenoid, spring return Double solenoid Double solenoid, with manual override Double solenoid*, with diff. piston 14> /3 Closed center /3 Exhaust open center /3 Supplied center Single solenoid, spring return Double solenoid Double solenoid, with manual override Double solenoid*, with diff. piston 14> /3 Closed center /3 Exhaust open center /3 Supplied center * The valve can be connected as single solenoid valve with air return. 49

50 3/2, 5/2 and 5/3 Valves, Series 581 Spare parts Valve body (wear parts kit) Air Pilot versions The valve housing must be equipped with mounting pins either with or without a flow control. Mounting pins are delivered in sets of two as shown below. Delivered completely assembled. Part no. Part no. ISO version For valve function Valve body Mounting pins Mounting pins with flow control 5/2, single air pilot /2, double air pilot /2, double air pilot, with manual override* /2, single air pilot, with air return /3, closed center, double solenoid /3, exhaust open center, double solenoid /3, supplied center, double solenoid x 3/ /2, single air pilot /2, double air pilot /2, double air pilot, with manual override* /2, single air pilot, with air return /3, closed center, double solenoid /3, exhaust open center, double solenoid /3, supplied center, double solenoid /2, single air pilot /2, double air pilot /2, double air pilot, with manual override* /2, single air pilot, with air return /3, closed center, double solenoid /3, exhaust open center, double solenoid /3, supplied center, double solenoid /2, single air pilot /2, double air pilot /2, double air pilot, with manual override* /2, single air pilot, with air return /3, closed center, double solenoid /3, exhaust open center, double solenoid /3, supplied center, double solenoid *The valve has manual overrides in the end covers. See the dimension drawing. Valve cover ISO Version Part no. 1 Pneumatic actuation Pneumatic actuation Pneumatic actuation Pneumatic actuation For internal signal processing For internal signal processing For internal signal processing Delivered with seals and screws. 50

5/2 Valve Series 585, G 1/8-G 1/4

5/2 Valve Series 585, G 1/8-G 1/4 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service 5/2 Valve Series 585, G 1/8-G 1/4 Technical data 5/2 Valve Series 585, G 1/8-G 1/4 Single valve, single

More information

Solenoid Valve Island Type 3965

Solenoid Valve Island Type 3965 Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and

More information

Electric Drives. Linear Motion and Assembly Technologies Pneumatics Service. Valves, Series VP15. Technical data

Electric Drives. Linear Motion and Assembly Technologies Pneumatics Service. Valves, Series VP15. Technical data Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Valves, Series VP5 Technical data Completely mounted valve terminal system, BUSdirect (Profibus DP) Technical

More information

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and

More information

Electrically operated spool valve. The manual override is detent and is operated by screw driver.

Electrically operated spool valve. The manual override is detent and is operated by screw driver. Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed

More information

COILS, CONNECTORS, SOLENOID VALVES

COILS, CONNECTORS, SOLENOID VALVES COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...

More information

HERION. MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES. Flexible subbase system with a wide range of accessories

HERION. MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES. Flexible subbase system with a wide range of accessories MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES HERION ISO 15407-1 / VDMA 24563 Brochure N-288 Compact design and high performance The right spool technology for critical pneumatic

More information

nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel

nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»

More information

Series MI-01, MI-02, MI-03

Series MI-01, MI-02, MI-03 Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium

More information

MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15

MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15 MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN

More information

nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel

nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4

More information

For double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring

For double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching

More information

VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm

VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and

More information

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518 3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions

More information

02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,

02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend, Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals

5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals 5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO 5599- #, #2, #3, #4 Steel reinforced main seals 6 bar and 0 bar CNOMO solenoid pilots with locking or non-locking manual override Low

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves

V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves V/V series, x /, / & / > > x/, / and / valves, ISO 07-/ VDMA 6, Size 6 mm > > Solenoid and pilot actuated > > High performance, compact design > > Flexible sub-base system > > Multipressure system capability

More information

Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)

Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =

More information

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical

More information

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv) Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented

More information

NAMUR Technical details

NAMUR Technical details Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free

More information

Transmitters: Relay Valve VR4151/4152

Transmitters: Relay Valve VR4151/4152 Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2

More information

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

More information

SOLENOID VALVES AND PNEUMATIC VALVES

SOLENOID VALVES AND PNEUMATIC VALVES A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly

More information

Valve Manifolds. Series Fielbus Electronics - 51

Valve Manifolds. Series Fielbus Electronics - 51 Valve Manifolds 07GB-07/R0 Series 0 Fielbus Electronics - 0 Series General Information 0 Valve Series belong to the Numatics Valve Generation 000. With up to outputs and 96 inputs., depending on the protocols

More information

NAMUR Technical details

NAMUR Technical details Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,

More information

High performance pneumatic valve system 02 Directional Control Valves

High performance pneumatic valve system 02 Directional Control Valves Pneumatics High performance pneumatic valve system 0 Directional Control Valves Automation Technology Bosch Directional Control Valves work compatibly with these other Bosch components to increase your

More information

Series VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4

Series VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4 Type of actuation 4 Piping 0 Side ported Bottom ported 4 Without sub-plate Large Size 5 Port Solenoid Valve Rubber Seal Series 50/4 70 Series VP 5 port solenoid valve 5 7 position single position double

More information

Section 6. Four Station Nugget 30 High Flow Micro Valve with 25-pin D connector and Pneufit Fittings

Section 6. Four Station Nugget 30 High Flow Micro Valve with 25-pin D connector and Pneufit Fittings Section 6 Nugget 30 Series Valves 5/2 and 5/3-position, high flow, compressed air micro valve with compact, lightweight 10mm body, and interchangeable fittings for 1/8", 5/32", 1/4", 4 or 6 mm tubing.

More information

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve Type 367 Solenoid Valve Application Solenoid valve for controlling pneumatic linear actuators with NAMUR rib according to IEC 60534 or pneumatic rotary actuators with NAMUR interface according to VDI/VDE

More information

VAL-138. Valves. Electrical Details for Solenoid Pilot. Operating Pressure

VAL-138. Valves. Electrical Details for Solenoid Pilot. Operating Pressure Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot ctuated ISO 5407- / VDM 24 563 Size 26 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich

More information

Control & Power, Inc

Control & Power, Inc Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder

More information

Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217

Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217 1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series inline inline hazardous location Manifold mounting 35 sub-base non plug-in sub-base with pressure regulators sub-base hazardous

More information

MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142

MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142 3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,

More information

2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA

2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL

More information

MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142

MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142 Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2

More information

Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C

Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the

More information

V82 series - Redundant valve manifold systems - Compact 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability

V82 series - Redundant valve manifold systems - Compact 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability V8 series - Redundant valve manifold systems - Compact oo Safety, oo Availability and oo Safety and Availability > > Compact design - Herion valves > > Exhaust guards as standard > > SIL certified components

More information

Series PD directly operated solenoid valves

Series PD directly operated solenoid valves > Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current

More information

Pneumatic. PVD Everdure Ceramic Valves

Pneumatic. PVD Everdure Ceramic Valves PVD Ceramic Valves Ceramic slide plate; extremely long life Built in manual override Transfer modules to combine all sizes Selectable air pilot control Clip-on DIN rail Specification Material Polyamide

More information

VALVES ISO 5599/1, SERIES IPV-ISV

VALVES ISO 5599/1, SERIES IPV-ISV VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid

More information

FIELDBUS ELECTRONICS 580 Electronics (Series : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm)

FIELDBUS ELECTRONICS 580 Electronics (Series : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm) FIELDBUS ELECTRONICS 580 Electronics (Series - : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm) 580 Fieldbus - Electronics Made Easy! Innovative Graphic Display is used for easy commissioning,

More information

N/** поставка оборудования для подготовки воздуха

N/** поставка оборудования для подготовки воздуха M/0000 Series Inline /, 5/ and 5/ Spool Valves Solenoid and Pilot Actuated G / Low power solenoids High flow Unique steel reinforced seals Light weight corrosion resistant materials Technical Data Medium:

More information

97105 Inline. Ordering information. Technical data. Accessories See page 5

97105 Inline. Ordering information. Technical data. Accessories See page 5 75 Inline /-, 5/- and 5/ directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves G /, / NPT, G /, / NPT For single and double operated actuators Crossover-free switching,

More information

SOLENOID VALVES AND PNEUMATIC VALVES

SOLENOID VALVES AND PNEUMATIC VALVES 9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated

More information

HERION SERIES Indirect solenoid actuated soft seal

HERION SERIES Indirect solenoid actuated soft seal HERION 9700 SERIES Indirect solenoid actuated soft seal spool valves with NAMUR interface /, 5/ - G/ For single and double acting actuators Crossover-free switching, switchover function guaranteed even

More information

For single and double operated actuators. Exhaust air recirculation (3/2 way function)

For single and double operated actuators. Exhaust air recirculation (3/2 way function) For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust

More information

1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110

1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110 Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902

More information

BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162

BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162 Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented

More information

Sentronic LP IO-Link CLASS A 617 Series. Proportional Technology

Sentronic LP IO-Link CLASS A 617 Series. Proportional Technology Sentronic LP IO-Link CLASS A 617 Series Proportional Technology PROPORTIONAL PRESSURE CONTROL: 617 SERIES SENTRONIC LP IO-LINK VERSION ASCO NUMATICS Sentronic LP The Sentronic LP is a highly efficient

More information

Nugget 40, V08 series

Nugget 40, V08 series Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds

More information

Pneumatic. PVD Ceramic Valves

Pneumatic. PVD Ceramic Valves Pneumatic PVD Ceramic Valves Ceramic slide plate; extremely long life Built in manual override Transfer modules to combine all sizes Selectable air pilot control Clip-on DIN rail Specification Material

More information

SOLENOID VALVES AND PNEUMATIC VALVES

SOLENOID VALVES AND PNEUMATIC VALVES S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For

More information

Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C

Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure

More information

BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162

BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162 Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented

More information

Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)

Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv) Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port

More information

Solenoid valves VUVS/valve manifold VTUS, NPT

Solenoid valves VUVS/valve manifold VTUS, NPT Solenoid valves VUVS/valve manifold VTUS, NPT -V- New VUVS-LT25, VTUS-25 Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty

More information

Solenoid valve VDHT standard BSP (British Standard Pipe)

Solenoid valve VDHT standard BSP (British Standard Pipe) Technical data sheet standard BSP (British Standard Pipe) danfoss.high-pressurepumps.com 521B1166 / DKCFN.PD.043.A1.02 Index 3. Picture Overview 4. Features 5. Technical data 6. Technical data 7. General

More information

ROSS CONTROLS. Base Mounted Valves. and Serial Bus Communication

ROSS CONTROLS. Base Mounted Valves. and Serial Bus Communication ROSS CONTROLS Base Mounted Valves and Serial Bus Communication ISO 15407-1 & 2 ISO 5599/I & /II Serial Communications VLVE TYPE NSI SE Miniature 14 Series Solenoid Pilot Valves Pack VLVE SERIES DESCRIPTION

More information

3/2-way Solenoid Valve for pneumatics

3/2-way Solenoid Valve for pneumatics 656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511

More information

Series PD directly operated solenoid valves

Series PD directly operated solenoid valves > Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.

Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules. / and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with

More information

Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)

Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv) Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3

More information

Valve terminal systems Valve terminal systems Series TC15. Brochure

Valve terminal systems Valve terminal systems Series TC15. Brochure Series TC15 Brochure Bosch Rexroth AG Pneumatics Series TC15 Valve terminal systems Valve terminal system, Series TC15 Qn max. = 1500 l/min; single plug-in wiring; Electr. connection: plug, form C / Plug

More information

CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L

CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L CABINET MOUNTING 501 series FEATURES The 501 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI

More information

CERAM ISO 5599/1 VALVES PNEUMATIC DIRECTIONAL CONTROL

CERAM ISO 5599/1 VALVES PNEUMATIC DIRECTIONAL CONTROL CERAM ISO 5599/1 VALVES PNEUMATIC DIRECTIONAL CONTROL 4 Pneumatic Directional Control Valves AVENTICS Corporation Index TABLE OF CONTENTS PAGE Specifications and features... 5-6 Model number identification...

More information

% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.

% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4 NPT. Features. Construction. Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow

More information

2/2 Pressure operated valves

2/2 Pressure operated valves Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54

More information

Pressure regulators E/P pressure regulators Series EV04. Brochure

Pressure regulators E/P pressure regulators Series EV04. Brochure Pressure regulators E/P pressure regulators Brochure Pressure regulators E/P pressure regulators E/P pressure regulator, Qn= 50 l/min Compressed air connection output: G /8 Electr. connection: Plug, EN

More information

Servo solenoid valves with positive overlap and on-board electronics (OBE)

Servo solenoid valves with positive overlap and on-board electronics (OBE) Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Servo solenoid valves with positive overlap and on-board electronics (OBE) RA 2989/1.5 1/24 Model 4WRLE

More information

Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Metric Series Overview

Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Metric Series Overview Overview Modular multi-functional valve manifold for up to 3 valves: Type 44 VTSA, ISO 15407-/ISO 5599- Type 45 VTSA-F with optimized flow Different valve sizes on one valve manifold: 18 mm (ISO 0) 6 mm

More information

Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Inch Series Overview

Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Inch Series Overview Overview Modular multi-functional valve manifold for up to 3 valves: Type 44 VTSA, ISO 15407-/ISO 5599- Type 45 VTSA-F with optimized flow Different valve sizes on one valve manifold: 0.71 in (ISO 0) 1.0

More information

Series P directly operated solenoid valves

Series P directly operated solenoid valves > Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds

More information

Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.

Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65. NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual

More information

4/3 directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE)

4/3 directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE) 4/ directional control valve, pilot operated, with electric position feedback and integrated electronics (OBE) RE 977/.1 Replaces: 1.9 1/16 Type 4WRVE 1...7, symbols V, V1 Sizes 1, 16, 5, 7 Component series

More information

3/2 Dovetail Valves, ND 2, G 1/8

3/2 Dovetail Valves, ND 2, G 1/8 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Service 3/2 Dovetail Valves, ND 2, G /8 Technical data 3/2 Dovetail Valves, ND 2, G /8 Normally closed or open Technical Data

More information

SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4

SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4 SPOO & SEEVE VAVES monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FEATURES Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended

More information

ISO 5599/ Series Technical and Operating Data

ISO 5599/ Series Technical and Operating Data ISO 5599/ Series...................................................................3-9 Technical and Operating Data......................................................................3- How to Order...................................................................................5-6

More information

Electro-Pneumatic Devices Valves and Positioners. The Drive & Control Company

Electro-Pneumatic Devices Valves and Positioners. The Drive & Control Company Electro-Pneumatic Devices Valves and Positioners The Drive & Control Company Electro-Pneumatic Devices Dynamic precision from Rexroth Why choose Rexroth E/P s? Rexroth electro-pneumatic pressure control

More information

Our policy is one of continued research and development. We therefore reserve the right

Our policy is one of continued research and development. We therefore reserve the right 970 Namur /-, /- and /-Directional control valves Electromagnetic indirectly controlled soft seal spool valves G /4, /4 NPT NAMUR-interface For single and double operated actuators Exhaust air recirculation

More information

Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW

Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3

More information

AUTO STAR with central connector M12x1

AUTO STAR with central connector M12x1 with central connector M2x Non corrosive spool and sleeve for long trouble free life 5/2 and Glandless Valves Actuated Sub-base Mounted ISO 5599- #, #2, #3 6 bar (4,5 W) and 0 bar (2 W) 24V DC solenoids

More information

5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm

5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm > Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series

More information

4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated

4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated Model 4 WRA(E)B Size 6 Series 1X

More information

Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239

Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service

More information

Valve terminal systems Valve terminal systems Series TC08. Brochure

Valve terminal systems Valve terminal systems Series TC08. Brochure Series TC08 Brochure Bosch Rexroth AG Pneumatics Series TC08 Valve terminal systems Valve terminal system, Series TC08 Qn max. = 800 l/min; single plug-in wiring; Electr. connection: Plug M8 / plug, form

More information

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)

Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv) Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented

More information

The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).

The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm). /2- and 4/2-multi-way valves ; servo-assisted; block assembly or NAMUR flange; DN 4; flow rate: 00 l/min Advantages / Benefits II 2G EEx ia IIC T6 PTB0 ATEX 275 approved Available for block assembly and

More information

VALVES. V44/V45 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 26 mm

VALVES. V44/V45 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 26 mm V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich

More information

10 mm solenoid valves on manifold with multiconnection D-SUB

10 mm solenoid valves on manifold with multiconnection D-SUB 0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical

More information

MOUNTING BRACKETS. Dimensional Drawing - Mounting Options

MOUNTING BRACKETS. Dimensional Drawing - Mounting Options / MOUNTING BRACKETS Dimensions: mm Dimensional Drawing - Mounting Options Series Side Mounting Brackets Kit: PAT503860001 Series Side Mounting Brackets Kit: PAT503860002 E G F C D ØH B A Series A B C D

More information

Sentronic LP 617 Series

Sentronic LP 617 Series Sentronic LP 617 Series Proportional Technology www.asco.com PRESSURE CONTROL: 617 SERIES SENTRONIC LP Sentronic LP The Sentronic LP is a highly efficient and cost-effective option for your pressure regulation

More information

Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated

Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated > > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly

More information

Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)

Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv) Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented

More information

Valve Products. Valve Products Section D. Valve Products. Catalog PDN1000-3US Parker Pneumatic

Valve Products. Valve Products Section D. Valve Products. Catalog PDN1000-3US Parker Pneumatic Section irect Acting Valves - irect Acting Pictorial Index - www.parker.com/pneu/valve Inline continued N - Inline Poppet Inline or stacking /8 inch ports Pressures 0 to 5 PSIG Temperatures F to 5 F Flow

More information

Valves and Solenoid valves Series E 2/

Valves and Solenoid valves Series E 2/ CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly

More information