5/2-5/3 VALVES (1/8" + SUBBASE) Series G

Transcription

1 /-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions available: / - / - // TECHNICL CHRCTERISTICS mbient temperature Fluid temperature Fluid Commutation system Ways/Positions Connections Nominal Ø Nominal flow rate (Nl/min) CONSTRUCTIVE CHRCTERISTICS Valve body Seals Subbase and actuators Spool -0 0 C max 0 C filtered air 0 μm, lubricated or not spool /, /, //, bar indirect electro-, mechanical, pneumomechanical G/ mm / = 0 / = 00 // = 0 zamak nitrile rubber self-extinguishing technopolymes aluminum ELECTRIC CHRCTERISTICS Electropilot/coil Voltage Power consumption Protection degree Manual override CODIFICTION KEY /U0 series V DC standard, upon request V DC V C - 0 V C - 0 V C (only for version with integrated connection) for direct current W (, V) IP with button with tool position Spool valves G D (0/0) Series Type G = G/ threaded body (except coils and connectors) = / = / c.c. = / o.c. = / p.c. = // NC-NC = // NC-NO = // NO-NO = = DC = DC/C 0 = pneumomechanical = mechanical = = DC = DC/C o.c. = open centres c.c. = closed centres p.c. = pressurized centres Option D = external servoassisted pilot 0.0.0

2 G 0 mm - G/ Valves and solenoid valves Single electric impulse B D C Manual override B Coil with connector for single connection C External servoassisted pilot D Coil with intergrated connector for multipolar version DD-0**C Flow rate (Nl/min) bar = Supply port - = Use - = Exhaust Times (ms) En. De-en. = = Weight Kg Part no. / pneumomechanical 0, 0 0, G-0 G-0 / mechanical 0, 0, G- G- Double electric impulse D C B Manual override B Coil with connector for single connection C External servoassisted pilot D Coil with intergrated connector for multipolar version DD-0**C Flow rate (Nl/min) bar = Supply port - = Use - = Exhaust Times (ms) En. De-en. = = Weight Kg Part no. / 0 0, 0, G- G- / c.c. 00, 0, G- G- / o.c. 00,0 0, G- G- / p.c. 00, 0, G- G- / NC / NC 0, 0,0 G- G- (0/0) / NC / NO 0, 0,0 G- G- / NO / NO 0, 0,0 G- G- o.c. = open centres c.c. = closed centres p.c. = pressurized centres Solenoid valves are supplied without coil and connector.0.0 0

3 G 0 mm - G/ Valves and solenoid valves Single impulse = Supply port - = Use - = Exhaust = = Flow rate (Nl/min) bar Times (ms) En. De-en. Weight Kg Part no. / pneumomechanical 0, 0 0,0 G-0 / mechanical 0, 0 0,0 G- Double impulse = Supply port - = Use - = Exhaust = = Flow rate (Nl/min) bar Times (ms) En. De-en. Weight Kg Part no. / 0 0, 0 0,0 G- / c.c. 00, 0, G- / o.c. 00,0 0, G- / p.c. 00, 0, G- (0/0) / NC / NC 0, 0, G- / NC / NO 0, 0, G- / NO / NO 0, 0, G- o.c. = open centres c.c. = closed centres p.c. = pressurized centres 0.0.0

4 G 0 mm - G/ Valves and solenoid valves Multipolar connection Manual override = Supply port / - / = Exhaust G/ / - / = Electropilot exhaust G/ N = Number of valve positions End plate Single subbase Modular tie-rods Valve Multipolar fermale connector Coil with integrated connector Bus connection card End plate with modular connection (0/0) Tightening torque for fittings Thread M M G/ G/ max pair (Nm)

5 G 0 mm - G/ Valves and solenoid valves Electrical connection with external connector Manual override = Supply port / - / = Exhaust G/ / - / = Electropilot exhaust G/ N = Number of valve positions (0/0) End plate Single subbase Modular tie-rods Valve Coil Single connector S l l Tightening torque for fittings Thread M M G/ G/ max pair (Nm)

6 G ccessories GP-00 GP-0 GP- GP-0 GP-0// GP-0// threaded end plate weight: 0,0 Kg blank end plate weight: 0,00 Kg threaded end plate with male connector poles coils control - weight: 0,00 Kg threaded end plate with male connector poles coils control coils control (only for control more than coils max ) weight: 0,0 Kg sub-base with open diaphragms GP-0 without connection GP- monostable GP- bistable weight: 0,00 Kg sub-base with closed diaphragms GP-0 without connection GP- monostable GP- bistable weight: 0,0 Kg GP-0// GP-0// GP-0 GP- sub-base with closed supply and open exhausts GP-0 without connection GP- mostable GP- bistable weight: 0,0 Kg GP-00- modular tie-rod valve place weight: 0,00 Kg (package00 pcs.) sud-base with open supply and closed exhausts GP-0 without connection GP- mostable GP- bistable weight: 0,0 Kg GP-00- modular tie-rod valve places weight: 0,00 Kg (package00 pcs.) Z-VN0 screw M0x for tie-rods (package00 pcs.) Z-SN00 hexagonal nut M (package00 pcs.) intermediate supply plate (to be used only with GP-... series) sub-base weight: 0,0 Kg GP-00- modular tie-rod valve places weight: 0,0 Kg (package00 pcs.) closing plate for unused station weight: 0,0 Kg GP--0/..MF BUS connection card control side with pin GP--0MF place GP--0MF places GP--0MF places GP--0MF places GP--0MF places weight: 0,00 Kg (for each place) GP--0/..MF BUS connection card control side with pin GP--0MF place GP--0MF places GP--0MF places GP--0MF places GP--0MF places weight: 0,00 Kg (for each place) GP- BUS connection card control side with pin (only places) for manifolds with control and more than coils up to coils use GP- card places and then GP--... weight: 0,00 Kg (for each place) upon request customized solutions up to places DD-0 DD-0**C V CC W coil for single connection weight: 0,0 Kg V CC W coil with integrated connector for multipolar version weight: 0,0 Kg (0/0).0.0 0

7 G/GL Flying connectors / Connection tables Electrical connections M-0 TSCFS000 TSCFS000 TSCFS000 TSCFD000 TSCFD000 TSCFD000 mm connector flying fermale connector sub D according to CEI 0- O.R. II (upon request) prewired for coils M x fixing screws flying male/fermale connector sub D according to CEI 0- O.R. II (upon request) prewired for coils with cable Ø mm of --0 m length suitable for mobile laying M x fixing screws Colour identification according to standard DIN 00 (0/0) Female connector D-SUB poles for coils PIN No. Colour Coil 0 0 white brown green yellow grey pink blue red black violet grey-pink red-blue white-green brown-green white-yellow yellow-brown white-grey grey-brown white-pink pink-brown white-blue brown-blue white-red brown-red brown-black shield white-black 0 0 side GP- GP Valve No

8 G mm G/ valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Versions available /-/ - luminium multiple sub-base Flow rate characteristics P (bar) 0 P (bar) Qn (Nl/min) P = Working pressure P = Supply pressure Qn = Flow rate / / single/double pulse 0 solenoid Manual Recovery Ø Capacity Energ. De-ener. Mass intervention () () mm Nl/min bar () ms () ms kg pneumech. Part number 0, 0,0 G-0 * 0 0, 0 0 0, G- closed centres - open centres - centres under pressure single/double pulse 0 solenoid Function closed centers control Ø Capacity Energ. De-ener. Manual Mass mm Nl/min bar (-) ms (-) ms intervention kg Part number Coil 0, 0, G- Coil U0 open centers control centers under pressure control 0, * 0, G- 0, 0, G- U0 G- single (0/0) G- double.0.0 0

9 e.g. GP-00-0 EXTRUDED SUBBSES G- / G- Series /" Multiple subbase The multiple subbase in extruded aluminium is characterized by compactness and strength and is suitable for the assembly in series of a predetermined number of valves. This subbase makes the separate conveyance of the pilot exhausts possible. e.g. G-00-0 For modular subbases (only G- Series), see page.0.0 Dimensions Material Places N. Mass kg Part number 0, GP , GP-00-0 aluminium Material 0, GP , GP , GP , GP-00- Places N. Mass kg Part number aluminium 0, G , G-00-0,0 G-00-0, G , G-00-0, G-00- (0/0) Seals and screws are included. Blanking plate for unused valve place Part number GP- for G- series G- for G- series 0.0.0