VALVES. V44/V45 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 26 mm

Transcription

1 V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich regulators and flow controls Dual spool technology V44 Glandless spool and sleeve V4 Softseal spool Collected pilot exhaust with internal pilot air supply Easily converted from internal to external pilot supply Sandwich plate allows for exchange of valves under pressure Shutoff plate allows for exchange of valves under pressure Technical data Medium Compressed air, 40µm filtered, lubricated or non-lubricated Operation V44: Glandless spool valve, solenoid pilot or air pilot actuated V4: Softseal spool valve, solenoid pilot or air pilot actuated Mounting On Subbases Size ISO 407- / VDM 46, 6mm Operating Pressure Maximum pressure psig (0 bar) V4 models and V44 solenoid pilot actuated valves with internal pilot supply psig (6 bar) V44 solenoid pilot actuated valves with external pilot supply and V44 air pilot actuated valves Characteristics Series Function l/min V44 / V44 / V4 /. 00 V4 /.7 0 V4 x/.7 0 mbient Temperature F* to F (- C* to 0 C) V44/V4 sol. and V4 air pilot models F* to 76 F (- C* to 80 C) V44 air pilot models *Consult our pplication Engineering for use below 6 F ( C) Materials Die cast aluminum body and subbase. Hard anodized spool, PTFE coated, matched aluminum spool and sleeve(v44) or aluminum alloy spool with HNR Seals (V4). POM plastic parts and NR static seals. End cover and screws zinc plated, stainless steel springs. Electrical Details for Solenoid Voltage Tolerances -0% / +% Rating 00% Continuos Duty Inlet orifice 0.8 mm Electrical Connection DIN 4 60 table C Push-turn locking and non-locking Protection Class IP 6 NEM 4 Materials PPS (body), FPM and NR (seals) VL-8

2 V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm x/ Solenoid ctuated Valves (Softseal Spool only) 0 0 Function x/ Supply Exhaust ctuation / Function Operating Pres. Pres. lb. Repair Kit V4D-C** NC Internal Collected x Sol/Spring V7046-KO V4D-C** NC External Not Collected Sol/Spring (0.xop.press.) 0. V7046-KO V4D-C** NO Internal Collected x Sol/Spring V7047-KO V4D-C** NO External Not Collected Sol/Spring (0.xop.press.) 0. V7047-KO V4CD-C** NO/NC Internal Collected x Sol/Spring.0/ V7048-KO V4CD-C** NO/NC External Not collected Sol/Spring.0/ (0.xop.press.) 0. V7048-K 8 0 NC = Normally Closed NO = Normally Open / Solenoid ctuated Valves Spool Techn Supply Exhaust Operator Return Operating Pres. Pres. lb. Repair Kit V44D-C** Gl Internal Collected x Solenoid ir Spring V7040-KO V44D-C** Gl External Not collected Solenoid ir Spring Hg V7040-KO V447D-C** Gl Internal Collected x Solenoid Spring V7040-KO V47D-C** Ss Internal Collected x Solenoid Spring V704-KO V447D-C** Gl External Not collected Solenoid Spring Hg V7040-KO V47D-C** Ss External Not collected Solenoid Spring. 6 Hg V704-KO 8 V44D-C** Gl Internal Collected x Solenoid Solenoid V7040-KO V4D-C** Ss Internal Collected x Solenoid Solenoid V704-KO V44D-C** Gl External Not collected Solenoid Solenoid Hg V7040-KO 8 V4D-C** Ss External Not collected Solenoid Solenoid. 6 Hg V704-KO ** Insert voltage code from Table Voltage Codes and Spare Valves. dd connector code from Table, Connector Codes and Part Number. Gl = Glandless Spool Ss = Soft Seal Table **Voltage Codes and Spare Valves Voltage Code Power Inrush / Hold Valve Part.-no. Push only Push and Turn VDC. W VZC7LC-C 4 VDC. W VZC7LC-C VZC7LC-C 4 V 0/60 Hz.. /. V VZC7LC-C 48 V 0/60 Hz 6. /. V VZC7LC-C6 0 VDC 7 W VZC7LC-C7 V 0/60 Hz 8. /. V VZC7LC-C8 VZC7LC-C8 0 V 0/60 Hz 9. /. V VZC7LC-C9 Other voltages available on request. Spare pilot valves are delivered with mounting screws. Table Connector Codes and Part Number Code Part Number = Solenoid without connector = Cable grip V007-D00 C = 0 ft. molded cable, 0-40 VC/VDC V00-D0 H = Cable grip w/indicator light, 4 VC/VDC V00-D J = Cable grip w/indicator light, 0 VC/VDC V00-D8 = 0 ft. molded cable with indicator light, surge suppression, V00-D0 4 VC/VDC 6 = 0 ft. molded cable with indicator light, 0V/0 Hz-0V.60Hz V00-D0 VL-86

3 V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm / Solenoid ctuated Valves Spool Techn. Valve Function Supply Exhaust Operator Return Operating Pres. Pres. lb. Repair Kit V446D-C** Gl P Internal Collected x Solenoid Solenoid V7040-KO 8 V46D-C** Ss P Internal Collected x Solenoid Solenoid V704-KO V446D-C** Gl P External Not collected Solenoid Solenoid Hg V7040-KO V46D-C** Ss P External Not collected Solenoid Solenoid. 6 Hg V704-KO V447D-C** Gl COE Internal Collected x Solenoid Solenoid V7040-KO V47D-C** Ss COE Internal Collected x Solenoid Solenoid V7044-KO V447D-C** Gl COE External Not collected Solenoid Solenoid Hg V7040-KO V47D-C** Ss COE External Not collected Solenoid Solenoid. 6 Hg V7044-KO V448D-C** Gl COP Internal Collected x Solenoid Solenoid V7040-KO V48D-C** Ss COP Internal Collected x Solenoid Solenoid V704-KO V448D-C** Gl COP External Not collected Solenoid Solenoid Hg V7040-KO 8 V48D-C** Ss COP External Not collected Solenoid Solenoid. 6 Hg V704-KO Gl = Glandless Spool Ss = Soft Seal Table **Voltage Codes and Spare Valves Voltage Code Power Inrush / Hold Valve Part.-no. Push only Push and Turn VDC. W VZC7LC-C 4 VDC. W VZC7LC-C VZC7LC-C 4 V 0/60 Hz.. /. V VZC7LC-C 48 V 0/60 Hz 6. /. V VZC7LC-C6 0 VDC 7 W VZC7LC-C7 V 0/60 Hz 8. /. V VZC7LC-C8 VZC7LC-C8 0 V 0/60 Hz 9. /. V VZC7LC-C9 Other voltages available on request. Spare pilot valves are delivered with mounting screws. P = ll Ports locked COE = Center Open to Exhaust COP = Center Open to Pressure Table Connector Codes and Part Number Code Part Number = Solenoid without connector = Cable grip V007-D00 C = 0 ft. molded cable, 0-40 VC/VDC V00-D0 H = Cable grip w/indicator light, 4 VC/VDC V00-D J = Cable grip w/indicator light, 0 VC/VDC V00-D8 = 0 ft. molded cable with indicator light, surge suppression, V00-D0 4 VC/VDC 6 = 0 ft. molded cable with indicator light, 0V/0 Hz-0V.60Hz V00-D0 x/ ir ctuated Valves (Softseal Spool) 0 0 Function x/ ctuation / Function Operating Pres. Pres. (lb.) Spares Kit V4-X000 NC ir/spring (0.xop. pressure) 0.0 V7046-KO V4-X000 NO ir/spring (0.xop. pressure) 0.0 V7047-KO V4C-X000 NO/NC ir/spring.0/ (0.xop. pressure) 0.0 V7048-KO 0 NC = Normally Closed NO = Normally Open / ir ctuated Valves Techn. Spool Operator Return Operating Pres. Pres. (lb.) Repair Kit V447-X0090 Gl ir Spring Hg V7040-KO V47-X0090 Ss ir Spring. 6 Hg V704-KO V44-X000 Gl ir ir Hg V7040-KO V4-X000 Ss ir ir. 6 Hg V704-KO Gl = Glandless Spool Ss = Soft Seal VL-87

4 V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm / ir ctuated Valves Gl = Glandless Spool Ss = Soft Seal Spool Valve Function Operator Return Operating Pres. Pres. (lb.) Spares Kit V446-X000 Gl P ir ir Hg V7040-KO V46-X000 Ss P ir ir. 6 Hg V704-KO V447-X000 Gl COE ir ir Hg V7040-KO V47-X000 Ss COE ir ir. 6 Hg V7044-KO V448-X000 Gl COP ir ir Hg V7040-KO V48-X000 Ss COP ir ir. 6 Hg V704-KO P = ll Ports locked COE = Center Open to Exhaust COP = Center Open to Pressure ases Side Ported without Ports Side * Ported with Ports Side Ported (PIF) without Ports * Side Ported (PIF) with Ports *Use with air pilot valves. V70-PF (/8 NPTF) V706-PF (/8 NPTF) V70-F (/8 PIF) V706-F (/8 PIF) V70-RF (/4 NPTF) V706-RF (/4 NPTF) V70-8F (ø8 mm) V706-8F (ø8 mm) V70-F (G/4) V706-F (G/4) V70-YF (ø0 mm) V706-YF (ø0 mm) End Plate Kit Single Station Sub-base Fixed Length Sub-base End Ported Side ported with Ports ottom ported V704-SC (/8 NPTF) V700-R (/4 NPTF) V70**-R0 V704-CC (G/8) V700- (G/4) **=0, 04, 06, 08, 0, stations ccessories Intermediate Supply/ Exhaust Module Single Valve Shut-Off Plate Single Pressure Regulator Plate Double Pressure Regulator Plate Control Plate V709-RO (/4 NPTF) V700-KO (Port blocked) V707-K (Port reg.) V707-K4 (Ports +4 reg.) V708-KO (Ports +) V709-O (G/4) V707-K (Port reg.) V707-K (Port 4 reg.) DIN EN 0 0 rail (.8 feet) DIN-rail Mounting Kit lanking Plate for unused station Single lanking Disk to Set-Up Kit V0009-C00 (x7.mm) V70-K0 V7000-KO V70-K00 (Ports,,) V70-K00 V09-C0 (xmm) V70-K00 (Ports +) Sandwich Plate with additional Pressure Port Transition Plate #8 Æ#6 mm V70-R0 /4 NPTF V7046-K00 V70-0 G/4 VL-88

5 V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm V44*D-C*** / Single Solenoid Valve ir Spring Return V44*7D-C*** and V4*7D- C*** / Single Solenoid Valve Mechanical Spring Return V44**D-C*** and V4**D-C*** / Double Solenoid Valve 4.7 (08).4 (8).0 (6.7).8 () 0. (6.4) 0.7 (9). (0).4 (9).4 (8).0 (6.7).8 () 0. (6.4) 0.7 (9) 4.0 (0).47 (7.4).4 (8).0 (6.7).8 () 0. (6.4) 0.7 (9). (0) V44***D-C*** and V4***D-C*** x/ + / Double Solenoid Valve 4.7 (08) V447-X00*0 and V47-X00*0 / Single ir Valves 4.0 (0) V44*-X00*0 and V4*-X00*0 x/ + / + / Double ir Valve. (0).4 (8).8 ().4 (9).8 () 0. (6.4).47 (7.4).4 (9).8 () 0. (6.4) 0. (6.4).0 (6.7).0 (6.7) 0.7 (9) 0.7 (9).0 (6.7) 0.7 (9). (0) Conversion from internal to external pilot supply / collected pilot exhaust The lowered and captive gasket between valve body and pilot valve defines and indicates pilot air supply as well as pilot exhaust function of the valve. Solenoid pilot actuated valves blue gasket Drawing shows no pilot valve. blue gasket Internal pilot supply, pilot exhaust air collected and exhausted via port. ll solenoid pilot valves with code at position 6 in the part number (e.g V4to) have the gasket mounted in this position on delivery. External pilot supply from port only, pilot exhaust air not collected but bleed through valve body. ll solenoid pilot valves with code at position 6 in the part number (e.g V4to) have the gasket mounted in this position on delivery. Note: Dismounting pilot valve gives access to gasket. Conversion from internal to external pilot supply (or vice versa) by turning the gasket. Caution: In this case part number and symbol on label shows different function. Therefore check gasket position when mounting valve. ir pilot actuated valves Drawing includes cover plate. blue gasket ir pilot actuated valves External pilot supply. VL-89

6 V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Subbase Single Station Subbase - Side Ported with Ports 0.86 (.8) 0.86 (.8) Side ported subbase 0.69 (7.6) 0.70 (7.9).7 (68.9) D.6 (4).06 (7) 0.0 () 0.9 (0) 0. (.) 0.7 (8) 0.7 (9).94 (49.4). (9.) 0.4 (0.8) C M 0.0 () 0.67 (7) Side ported subbase C Y /8ʼʼ.8 (46.6). (.) 0.9 (.) 0.7 (8.6).7 (4.4).69 (68.).4 (90) 0. ().9 (.).7 (90.6).4 (8).0 (8) 0.47 () 0.4 (6) 0. (.) 0.04 ().7 (80.).6 (9).7 (80.) 0. (.) (0.87) 0. (.) 0.8 () View Y Right Hand Side 0.47 () N = number of stations * N = Number of stations Left Hand Side ccessories DIN EN 00 rail x 7. mm,. (m) 0.68 lb (0. kg) V0009-C00 DIN EN 00 rail x mm,. (m). lb (.0 kg) V09-C0 DIN rail Mounting Kit D 0.0 lb (0.0 kg) V70-KO lanking Disk to Ports,, 0.0 lb (0.0 kg) V70-K00 lanking Disk to Ports lb (0.0 kg) V70-K00 M.94 (49.4) 0.8 (9.) 0.8 (4.) 0.8 (4.).07 (78.) Note: Port used for external pilot air supply or for collected pilot air exhaust. Never plug port when using valves with internal pilot air supply. Port is not used, plugging not necessary. x = Insert port type from table below Code Ports +4 Ports +.07 (7.) *N x.07 (7.).07 (7.) P /8NPTF 0- UNF R /4NPTF 0- UNF /8 PIF 0- UNF G/4 M 8 ø 8 mm PIF M Y ø 0 mm PIF M Individual components Ports +4 on side V70-xF Ports +4 on side Ports + on side V706-xF Ports +4 on bottom V70-E Ports +4 on bottom Ports + on side V706-E End Plate Kit Side Ported V704-CC (G/8) V704-SC (/8NPTF) End ported end caps left hand and right hand 4 0- UNF.7 ().7 (69) Port Size V700-R NPTF/4 0.4 (0.) side ported with pilot ports V700- G/4 side ported with pilot ports 0.4 (0.) C 0.40 lb (0.8 kg) 0.40 lb (0.8 kg) 0.40 lb (0.8 kg) 0.40 lb (0.8 kg) 0.80 lb( 0.6 kg) VL-90

7 V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Intermediate Supply / Exhaust Module.48 (6).0 () 0.4 ().0 (6) 0.4 (6).00 (.4) 0.98 (4.8) Fixed Length Subbase - ottom Ported 0.0 (7.) X.0 (6.).48 (7.) 0. (.) 0.4 (.) /8 NPTF 0.4 (.) 0. (.9) 0.9 (0) 0.67 (7) 0.6 (6) 0. ().7 (44).0 (77) 0.7 (9).0 (6) Port Size V709-RO /4NPTF 0.6 V709-O G/4 (0.) 0.97 (4.6) 0.94 (4).06 (7) /4" NPTF View X.6 () Provides additional porting on Modular or Fixed Length Sub-base. Occupies one valve station. Supplied with gasket for both sub-bases. Can be used to: - Improve supply flow - Increase exhaust capacity - Pneumatically separate valves for fail save emergency - Multipressure system and system solutions lanking Plate No. of Stations inch (mm) V700-R0.7 (8) V7004-R0 4.9 (7) V7006-R (9) V7008-R (4) V700-R (99) V70-R0.90 () inch (mm).68 (68) 4.80 () 6.9 (76) 9.06 (0).8 (). (8) 0.88 (0.40).4 (0.6).00 (0.9). (.). (.4).66 (.66) NOTE: This subbase is suitable for solenoid pilot actuated valves with internal pilot air supply only..0 (6) 0.9 (0) 0.4 (6) 0.7 (9).76 (70) Single Valve Shut-Off Plate 0.8 (.) 0.6 (6.) 0. (8) 0. (.4) Description V7000-KO lanking Plate for blocking of unused stations (supplied with gasket) 0. (0.0).8 (97).0 () 0.7 (9).06 (6.8) Description V700-KO Single Shut-Off Plate supplied with gasket 0.8 (0.) llows individual exchange of valve, while valve manifold is pressurized by port. Note: restricted to max. of 0. VL-9

8 V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Control Plate 0.8 (.) 0.40 (0.) Pressure Regulator Plate 0.7 (9) 0.6 (6.) 0. (8.).7 (40). (89.) ø.0 (ø 6).7 (6.) 4.7 (0.7).69 (9.7) 0.7 (9).06 (6.8) 6.7 (6) ø 0.87 (ø.).89 (7.).49 (8) 0. (8.).04 (6.) Description V708-KO control 0.7 supplied with gasket (0.7) Dual Regulation of Exhaust Ports and Description V707-K Regulation of Port 0.79 (0.6) Maximum inlet pressure psig (6 bar) Regulated pressure 7. psig (0. 0 bar) Exhaust (Ports +) [] Number of turns from closed : Port and 4 remain unchanged measured at 87 psig inlet, Pressure drop psi 0.7 (9).7 (40). (89.) ø.0 (ø 6) ø 0.87 (ø.).89 (7.).49 (8) 6.7 (6) 0. (8.).04 (6.) Description V707-K Regulation of Port 0.6 (0.79) Maximum inlet pressure Regulated pressure psig (6 bar). psig ( 0 bar) VL-9

9 V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Pressure Regulator Plate ø.0 (ø6) 7.0 (79) Hysteresis (bar) psig (.) 6 (.4) (.) Starting Point (.0) (4) ø..89 (7.).49 (8) 0. (8.).04 (6.) Outlet pressure (.8) (.6) (.) psig () () (4) () (6) (7) (8) (9) (0) (bar) Inlet pressure Description V707-K4 Regulation of Ports +4. (0.6) Maximum inlet pressure psig (6 bar) Regulated pressure. psig ( 0 bar).49 (8).89 (7.) ø 0.87 (ø.). (89.).7 (40) ø.0 (ø 6) 0.7 (9) Characteristics for Pressure Regulator Plates Regulated pressure psig (bar) (8) 6 (6.) 9 (6) 87 (.) 77 Inlet pressure = 6 psig (8 bar) p = psig (0 bar) (4) 8 () scfm (80) (60) (40) (70) (900)(qn l/min) Sandwich Plate with additional Pressure Port 0. (.4) /4" NPTF 0.8 (.) 0.6 (6.) 0.7 (9.) 0.7 (9).06 (6.8).04 (6.) 0. (8.) 6.7 (6) Description V707-K Regulation of Port (0.6) Maximum inlet pressure Regulated pressure psig (6 bar). psig ( 0 bar) 0. (.9). (79).0 () e Description V70-RO Sandwich Plate with additional Port, supplied with gasket 0.6 (0.) VL-9