Valve terminal systems Valve terminal systems Series TC15. Brochure

Transcription

1 Series TC15 Brochure

2 Bosch Rexroth AG Pneumatics Series TC15 Valve terminal systems Valve terminal system, Series TC15 Qn max. = 1500 l/min; single plug-in wiring; Electr. connection: plug, form C / Plug M8 3 Valves Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, ISO 15217, form C; Can be assembled into blocks Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, M8, 4-pin; Can be assembled into blocks Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, M8, 3-pin; Can be assembled into blocks; manual override: with detent Valves, Series TC15 Qn = l/min; pipe connection, plate connection; compressed air connection output: Accessories Electrical connectors, Series CN1 ISO 15217:2000; Electrical connector, form C; with cable 15 Electrical connectors, Series CN1 ISO 15217:2000; Electrical connector, form C 17 Connecting cable, Series CN1 Socket, M8, 3-pin 18 Connecting cable, Series CN1 Socket, M8, 4-pin; without wire end ferrule, tin-plated, 4-pin 20 Accessories, Series TC15 21

3 Bosch Rexroth AG Pneumatics 3 Valve terminal system, Series TC15 Qn max. = 1500 l/min; single plug-in wiring; Electr. connection: plug, form C / Plug M Certificates CE declaration of conformity Working pressure min./max bar / 10 bar Control 2.5 bar / 10 bar pressure min./max. Ambient temperature min./max. -10 C / +50 C Medium temperature min./max. -10 C / +50 C Medium Compressed air Particle size max. 5 µm Oil content of compressed air 0 mg/m³ - 5 mg/m³ Protection class according to EN IP :, with plug, form C, Plug M8 Number of valve positions 12 Number of solenoid coils 24 Connector standard ISO 15217:2000 EN Rail mounting DIN EN x 15 DC operating 24 V Voltage tolerance DC -10% / +10% Operational AC at 50 Hz 230 V Voltage tolerance AC 50 Hz -10% / +10% Operational AC at 60 Hz 230 V Voltage tolerance AC 60 Hz -10% / +10% An example configuration is illustrated. The delivered product may thus deviate from the illustration. Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Operational for electrical port M8 (3 or 4-pin) only 24 V DC See the following pages on the series for technical data for individual components. Configurable product This product is configurable. Please use our configurator at or contact the nearest Bosch Rexroth sales office.

4 4 Bosch Rexroth AG Pneumatics Valve terminal system, Series TC15 Qn max. = 1500 l/min; single plug-in wiring; Electr. connection: plug, form C / Plug M8 Dimensions An example configuration is illustrated. The delivered product may thus deviate from the illustration. Mounted via 4 through-holes in the end plates or assembly on hat rail as per EN _a n A B n = number of valve positions

5 Bosch Rexroth AG Pneumatics 5 Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, ISO 15217, form C; Can be assembled into blocks Version Spool valve, zero overlap Pilot external Sealing principle soft sealing Blocking Plate principle principle Rail mounting DIN EN x 15 Working pressure min./max bar / 10 bar Ambient temperature min./max. -10 C / +50 C Medium temperature min./max. -10 C / +50 C Medium Compressed air Particle size max. 5 µm Oil content of compressed air 0 mg/m³ - 5 mg/m³ Connector standard ISO 15217:2000 Protection class IEC I Protection class according to EN IP :2000 with electrical connector/plug Duty cycle 100 % Generic emission standard in accordance EN 50081:1992 with Materials: Housing Seals Front plate Threaded bushing Polyamide Acrylonitrile Butadiene Rubber; Hydrogenated nitrile butadiene rubber Polyamide Die cast zinc Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Voltage tolerance Power consumption DC AC 50 Hz AC 60 Hz DC AC 50 Hz AC 60 Hz DC AC 50 Hz Switch-on power Holding power W VA VA VA VA - -10% / +10% -10% / +10% V % / +10% V 110 V - -10% / +10% -10% / +10% V 230 V - -10% / +10% -10% / +10% AC 60 Hz AC 50 Hz AC 60 Hz

6 6 Bosch Rexroth AG Pneumatics Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, ISO 15217, form C; Can be assembled into blocks MO Compressed air connection Flow conductance Flow rate value Control pressure min./max. Switch-on time Part No. Output DC AC 50 Hz AC 60 Hz b C Qn [l/(s*bar)] [l/min] [bar] [ms] R V / V 110 V V 230 V R V / V 110 V V 230 V R V / V 110 V V 230 V R V / V 110 V V 230 V R V / V 110 V V 230 V R V / V 110 V V 230 V R V / V 110 V V 230 V R V / V 110 V V 230 V R V / V 110 V V 230 V R V / V 110 V V 230 V R V / V 110 V V 230 V

7 Bosch Rexroth AG Pneumatics 7 Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, ISO 15217, form C; Can be assembled into blocks MO Compressed air connection Flow conductance Flow rate value Control pressure min./max. Switch-on time Part No. Output DC AC 50 Hz AC 60 Hz b C Qn [l/(s*bar)] [l/min] [bar] [ms] R V / V 110 V V 230 V Part No. Switch-off time Weight R R R R R R R R R MO = Manual override Electr. connection: Plug; ISO 15217, form C Nominal flow Qn at 6 bar and Δp = 1 bar [ms] [kg]

8 8 Bosch Rexroth AG Pneumatics Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, ISO 15217, form C; Can be assembled into blocks Part No. Switch-off time Weight R R R [ms] [kg] MO = Manual override Electr. connection: Plug; ISO 15217, form C Nominal flow Qn at 6 bar and Δp = 1 bar

9 Bosch Rexroth AG Pneumatics 9 Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, M8, 4-pin; Can be assembled into blocks Version Spool valve, zero overlap Pilot external Sealing principle soft sealing Blocking Plate principle principle Rail mounting DIN EN x 15 Working pressure min./max bar / 10 bar Ambient temperature min./max. -10 C / +50 C Medium temperature min./max. -10 C / +50 C Medium Compressed air Particle size max. 5 µm Oil content of compressed air 0 mg/m³ - 5 mg/m³ Protection class IEC III Protection class according to EN IP :2000 with electrical connector/plug Status display LED Yellow Duty cycle 100 % Materials: Housing Seals Front plate Threaded bushing Polyamide Acrylonitrile Butadiene Rubber; Hydrogenated nitrile butadiene rubber Polyamide Die cast zinc Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Voltage tolerance Power consumption DC DC DC W 24 V -10% / +10% 2.2 MO Compressed air connection Flow conductance Flow rate value Control pressure min./max. Switch-on time Switch-off time Weight Part No. Output DC b C Qn [l/ min] [bar] [ms] [ms] [kg] 24 V / V / MO = Manual override Electr. connection: Plug; M8; 4-pin Nominal flow Qn at 6 bar and Δp = 1 bar

10 10 Bosch Rexroth AG Pneumatics Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, M8, 4-pin; Can be assembled into blocks MO Compressed air connection Flow conductance Flow rate value Control pressure min./max. Switch-on time Switch-off time Weight Part No. Output DC b C Qn [l/ min] [bar] [ms] [ms] [kg] 24 V / V / V / V / V / V / V / V / V / MO = Manual override Electr. connection: Plug; M8; 4-pin Nominal flow Qn at 6 bar and Δp = 1 bar 24 V / PIN assignment and cable colors for electrical connector PIN assignment: 1) PIN not assigned 2) PIN not assigned Cable color 1) Brown 2) White 3) Blue 4) Black

11 Bosch Rexroth AG Pneumatics 11 Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, M8, 3-pin; Can be assembled into blocks; manual override: with detent Version Spool valve, zero overlap Pilot external Sealing principle soft sealing Blocking Plate principle principle Rail mounting DIN EN x 15 Working pressure min./max bar / 10 bar Ambient temperature min./max. -10 C / +50 C Medium temperature min./max. -10 C / +50 C Medium Compressed air Particle size max. 5 µm Oil content of compressed air 0 mg/m³ - 5 mg/m³ Protection class IEC III Protection class according to EN IP :2000 with electrical connector/plug Status display LED Yellow Duty cycle 100 % Materials: Housing Seals Front plate Threaded bushing Polyamide Acrylonitrile Butadiene Rubber; Hydrogenated nitrile butadiene rubber Polyamide Die cast zinc Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Voltage tolerance Power consumption DC DC DC W 24 V -10% / +10% 2.2 MO Compressed air connection Flow conductance Flow rate value Control pressure min./max. Switch-on time Switch-off time Weight Part No. Output DC b C Qn [l/ min] [bar] [ms] [ms] [kg] 24 V / R V / R MO = Manual override Electr. connection: Plug; M8; 3-pin Nominal flow Qn at 6 bar and Δp = 1 bar

12 12 Bosch Rexroth AG Pneumatics Valves, Series TC15 Qn = l/min; plate connection, pipe connection; compressed air connection output: ; Electr. connection: Plug, M8, 3-pin; Can be assembled into blocks; manual override: with detent MO Compressed air connection Flow conductance Flow rate value Control pressure min./max. Switch-on time Switch-off time Weight Part No. Output DC b C Qn [l/ min] [bar] [ms] [ms] [kg] 24 V / R V / R V / R MO = Manual override Electr. connection: Plug; M8; 3-pin Nominal flow Qn at 6 bar and Δp = 1 bar 24 V / R PIN assignment for electrical connector Pin assignment: 1) Pin not assigned 3) 0 V 4) 24 V 5) LED Note: Bi-polar protective circuit to prevent over

13 Bosch Rexroth AG Pneumatics 13 Valves, Series TC15 Qn = l/min; pipe connection, plate connection; compressed air connection output: Version Spool valve, zero overlap Pilot external Sealing principle soft sealing Blocking Plate principle principle Rail mounting DIN EN x 15 Ambient temperature min./max. -10 C / +50 C Medium temperature min./max. -10 C / +50 C Medium Compressed air Particle size max. 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Materials: Housing Seals Threaded bushing Polyamide Acrylonitrile Butadiene Rubber; Hydrogenated acrylonitrile butadiene rubber Die cast zinc Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Compressed air connection Flow conductance Flow rate value Input Output Exhaust Pilot connection b C Qn Working pressure min./max. Control pressure min./max. Wt. Part No. [l/(s*bar)] [l/ min] [bar] [bar] [kg] M / 10 2 / M / / M / 10 3 / M / / M / 10 3 / M / 10 3 / M / 10 3 / Nominal flow Qn at 6 bar and Δp = 1 bar

14 14 Bosch Rexroth AG Pneumatics Valves, Series TC15 Qn = l/min; pipe connection, plate connection; compressed air connection output: Diagram Pe = External control pressure, min. P B = Working pressure

15 Bosch Rexroth AG Pneumatics 15 Series TC15 Accessories Electrical connectors, Series CN1 ISO 15217:2000; Electrical connector, form C; with cable Ambient temperature min./max. -20 C / +80 C Protection class according to EN IP 67 Cable exit angled 90 P894_ Number of plug options Max. current [for port 1] [V DC] [V AC] [A] Protective circuit LED status display Housing color 2 1 position Black 1 position Z-diodes Yellow Black 1 position Varistor Red Black Part No Part No. Number of wires Cable length Weight Note [m] [kg] Fig Fig Fig Fig Fig Fig Fig Fig Fig Fig Fig Fig Fig. 4

16 16 Bosch Rexroth AG Pneumatics Series TC15 Accessories Fig. 1 Fig. 2 1) 0 bushing insert 2) 180 bushing insert Fig. 3 Fig. 4 1) 0 bushing insert 2) 180 bushing insert

17 Bosch Rexroth AG Pneumatics 17 Series TC15 Accessories Electrical connectors, Series CN1 ISO 15217:2000; Electrical connector, form C Ambient temperature min./max. -40 C / +90 C Protection class according to EN 60529: IP 65 Cable fitting M16x1, Contact assignment Cable exit Protective circuit number of plug options 1 Part No. DC AC [V] [V] gn/ge E angled 90-4 positions at 90º E angled 90 Z-diodes 4 positions at 90º Part No. LED status display Housing color Weight Note [kg] Black Fig Yellow Transparent Fig. 2 Fig

18 18 Bosch Rexroth AG Pneumatics Series TC15 Accessories Fig _m Connecting cable, Series CN1 Socket, M8, 3-pin Ambient temperature min./max. -40 C / +85 C Protection class according to EN IP 65 Materials: Cable sheath Polyurethane Technical Remarks The specified protection class is valid only in assembled and tested state.

19 Bosch Rexroth AG Pneumatics 19 Series TC15 Accessories Electrical interface Number of plug options Max. current Cable exit Number of wires Cable length Part No. [Port 2] [for port 1] [A] [m] 3-pin straight without wire end ferrule, tinplated, straight pin without wire end ferrule, tinplated, straight pin without wire end ferrule, tinplated, straight pin 3-pin angled without wire 1 position 4 3 end ferrule, tinplated, angled pin without wire end ferrule, tinplated, angled pin without wire end ferrule, tinplated, angled pin without wire end ferrule, tinplated, 3-pin angled Part No. Weight Note [kg] Fig Fig Fig Fig Fig Fig Fig Fig Fig. 2 Fig. 1 (1) BN=brown (3) BU=blue (4) BK=black L = length _a

20 20 Bosch Rexroth AG Pneumatics Series TC15 Accessories Fig. 2 (1) BN=brown (3) BU=blue (4) BK=black L = length _b Connecting cable, Series CN1 Socket, M8, 4-pin; without wire end ferrule, tin-plated, 4-pin Ambient temperature min./max. -40 C / +85 C Protection class according to EN IP 65 Materials: Cable sheath Polyurethane Technical Remarks The specified protection class is valid only in assembled and tested state BK BU BN GN/YE Number of plug options Cable exit Number of wires Cable length Note Part No. [for port 1] [V DC] [m] straight Fig straight Fig position 24 angled Fig angled 90 5 Fig

21 Bosch Rexroth AG Pneumatics 21 Series TC15 Accessories Fig. 1 (1) BN=brown (2) WH=white (3) BU=blue (4) BK=black L = length _1 Fig. 2 (1) BN=brown (2) WH=white (3) BU=blue (4) BK=black L = length _2 Accessories, Series TC

22 22 Bosch Rexroth AG Pneumatics Series TC15 Accessories Part No. Type Weight [kg] End plate kit: internal pilot End plate kit: external pilot Supply/partition plate connection 1/3/ closed R Supply/partition plate connection open, 3/5 closed R Blanking plate Coupling kit for DIN rail mounting Tie rod, 2x, 1 piece Tie rod, 3x, 1 piece Tie rod, 4x, 1 piece Tie rod, 5x, 1 piece Tie rod, 6x, 1 piece Tie rod, 7x, 1 piece Tie rod, 8x, 1 piece Tie rod, 9x, 1 piece Tie rod, 10x, 1 piece Tie rod, 11x, 1 piece Tie rod, 12x, 1 piece Tie rod extension, 1 piece R Sealing kit, 10 pieces 0.04 Further accessories: For electrical connectors, contact bridges, plugs and cables, see the Chapter Valve terminal systems/electrical connectors and accessories. For connectors, silencers, etc., see the Chapter Assembly material. 3 tie rods are required per VTS.

23 Bosch Rexroth AG Pneumatics Ulmer Straße 4 D Laatzen Phone Fax sales-pneumatics@boschrexroth.de Your contact: Canada Bosch Rexroth Canada Corp Mainway Drive Burlington, Ontario L7M 1A8 Tel Fax Australia Bosch Rexroth Pty. Ltd. 3 Valediction Road Kings Park NSW 2148 Sydney Tel Fax U.S.A. Bosch Rexroth Corp Mercer Road Lexington, KY Kentucky Tel Fax Great Britain Bosch Rexroth Ltd. Broadway Lane South Cerney Cirencester, GL7 5UH Gloucestershire Tel Fax further contacts: The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging. This document, as well as the data, specifications and other informations set forth in it, are the exclusive property of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties. Subject to modifications. Printed in Germany. Order no /JJJJ-MM/EN