Power Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs.
|
|
- Malcolm Craig
- 5 years ago
- Views:
Transcription
1 Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module for additional terminals Power Range: 12W, 24W, 48W Input voltage: 1 to 24V AC (voltage range: 85 to 264V AC/11 to 35V DC) Up to 7ºC (158ºF) operating temperature DC low ED indicator and output contact The terminals are captive spring-up screws. Ring or fork terminals can be used. Finger-safe construction prevents electric shocks. Panel mount bracket and side-mount panel mounting bracket. Can be attached to a DI rail or directly to a panel surface. RoHS compliant U listed for Class 1, Division 2 Hazardous ocations Meets SEMI F47 Sag Immunity ABS Certified for maritime use PS6R Capacity* 12W Part o. Input Voltage Voltage 24W PS6R-G24 85 to 264V AC 21.6 to 26.4V 1A 48W 2A * voltage output current = output capacity Current 5A 37mm 6mm 85mm Applicable Standards Mark File o. or Organization U58 CSA C22.2 o E695-1 E5178 E Part umbers C ISTED US U/c-U isted File o. E TÜV SÜD EU ow Voltage Directive EMCD Accessories Item Part o. ote Voltage Expansion PS9Z-6RM1 : +5V, 2A, 1W Module ote 1 PS9Z-6RM2 : +12V, 1A, 12W PS9Z-6RM3 : +5V, 1A/-5V, 1A, 1W PS9Z-6RM4 : +15V,.4A/-15V,.4A, 12W PS9Z-6RM5 : +5V, 1A/+12V,.5A, 11W PS9Z-6RM6 : +12V,.5A/-12V,.5A, 12W ote 2 PS9Z-6RS1 Additional screw terminals for wiring: 2 + terminals / 2 - terminals Panel Mounting Bracket PS9Z-6R1F Side-mount Panel Mounting Supplied with M3 6 countersunk PS9Z-6R2F Bracket mounting screws DI Rail BD1 1,mm DI Rail End Clip B6 1. When using an output voltage expansion module, reduce 1A from the output current of PS6R. 2. When using a branch terminal module, the total voltage/current of PS6R and the branch terminal module should not exceed the rated current/voltage of PS6R OI Touchscreens PCs Automation Software Sensors Communication Barriers 12W shown with Branch Terminal module attached IDEC (4332) USA & Canada 167
2 Communication Sensors Automation Software PCs OI Touchscreens PS6R Input Supplementary Functions Dielectric Strength Specifications Part o. PS6R-G24 Input Voltage 1 to 24V AC (Voltage range: 85 to 264V AC/11 to 35V DC) (oad 8% at 85 to 1V AC, 11 to 14V DC) ote 1 Frequency 5/6Hz Input Current 1V AC 1.4A typ 2.7A typ 5.5A typ. 23V AC.7A typ 1.2A typ 2.3A typ. Inrush 1V AC 9A max. (Ta=25ºC, 1V AC cold start) Current 23V AC 2A max. (Ta=25ºC, 23V AC cold start) eakage 12V AC.5mA max. Current 23V AC 1mA max. Efficiency 1V AC 9% 9% 91% (Typical) 23V AC 9% 91% 93% Power Factor 1V AC (Typical) 23V AC Rated Voltage/Current 24V/5A 24V/1A 24V/2A Adjustable Voltage Range ±1% Holding Time 2ms min. (at rated input and output) Start Time 8ms max. (at rated input and output) Rise Time 2ms max. (at rated input and output) Regulation Total Fluctuation Input Fluctuation oad Fluctuation Temperature Change Ripple (including noise) ±5% max..4% max..6% max..5%/oc max. ( 1 to +6ºC) 1% p-p max. ( to +6ºC) 1.5% p-p max. ( 1 to ºC) Overcurrent Protection 15 to 12% (auto reset) (output current when voltage drops by 5%) Overvoltage Protection off at 12% ote 2 Operation Indicator Voltage ow Indication ED (green) ED (amber) Between input and output terminals 3V AC, 1 minute Between input and ground terminals 2V AC, 1 minute Between output and ground terminals 5V AC, 1 minute Insulation Resistance 1MΩ min. 5V DC megger (between input and output terminals/between input and ground terminals) (at room temperature and normal humidity) Operating Temperature 1 to +7ºC (no freezing) ote 3 Operating Humidity 2 to 9% RH (no condensation) Storage Temperature 25 to +75ºC (no freezing) Storage Humidity 2 to 9% RH (no condensation) Vibration Resistance 1 to 55 Hz, amplitude.375 mm (.187mm using PS9Z-6R1F) 2 hours each in 3 axes, 6 directions Shock Resistance 3 m/s 2 (15 m/s 2 when using a PS9Z-6R1F panel mounting bracket) EMC EMI E (Class B) EMS E (industrial) Degree of Protection IP2 (IEC 6529) Weight (approx.) 63g 96g 14g Terminal Screw M3.5 (See last page for wire sizes) 1. DC input voltage is not subjected to safety standards. 3. See the output derating curves. 2. One minute after the output has been turned off, turn on the input again. Easily Expandable Barriers Voltage Expansion Module In addition to the standard 24V output, additional 5, 12, and 15V outputs can be added. Two terminals can be added. o wiring is required, reducing installation space
3 Accessories (For use with PS6R) Part o. Voltage Expansion Module PS9Z-6RM1 PS9Z-6RM2 PS9Z-6RM3 PS9Z-6RM4 PS9Z-6RM5 PS9Z-6RM6 PS9Z-6RS1 Input Voltage 24V DC Capacity 1W max. 12W max. 1W max. 12W max. 11W max. 12W max. Rated Voltage/Current 5V/2A 12V/1A ±5V 2A ±15V.4A 5V/1A, 12V/.5A ±12V.5A 24V/1A max. ote 1 Adjustable Voltage Range ot available Voltage Accuracy ±5% max. Start Time 2 ms max. (at rated input and output) Input Fluctuation.5% max. Supplementary Functions Regulation oad Fluctuation Temperature Change Ripple (including noise) Overcurrent Protection 1.% max..5%/max. ( 1 to +6 C) 1mV max. 15mV max. 1mV max., 15mV max. 15% (auto reset) Overvoltage Protection off at 12% Operating Temperature 1 to +7 C (no freezing) ote 2 Operating Humidity 2 to 9%RH (no condensation) Storage Temperature 25 to +75 C (no freezing) Storage Humidity 2 to 9% RH (no condensation) Vibration Resistance 1 to 55 Hz, amplitude.375 mm, 2 hours each in 3 axes, 6 directions (in combination with ) Shock Resistance 3 m/s 2 (15 m/s 2 when using a PS9Z-6R1F panel mounting bracket), 3 shocks each in 6 axes (in combination with ) EMC EMI E (Class B) (in combination with PS6R- 24) EMS E (industrial) (in combination with PS6R- 24) Safety Standards U58 (isting), CSA C22.2 o.17.1, IEC/E695-1, E5178 (in combination with PS6R- 24) Degree of Protection IP2 (IEC 6529) Weight (approx.) 9g 3g Terminal Screw M3.5 (See last page for wire sizes.) 1. Ensure that the current does not exceed the rated current of the PS6R. 2. See the output derating curves. Wide Operating Termperature Range Current (%) Operates without derating at to 6ºC Operates at 1 to 7ºC Operating Temperature ( C) Easy Maintenance - ED Indicator Status ormal Overload or Input Voltage ow* DC O (green ED) DC ow (amber ED) *The EDs turn on when the input voltage drops. short-circuit OFF Energy-saving 93% Efficiency (48W) Efficiency (%) Input Voltage (V AC) Competitor A Competitor B OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 169
4 Dimensions (mm) OI Touchscreens 6 - M3.5 Terminal Screws A A PS6R-G M3.5 Terminal Screws A A M3.5 Terminal Screws A A PCs 37 A = A A A A 6 A = A A A A A A 85 A = PS9Z-6R1F Panel Mounting Bracket 28 4-M4 or ø4-4.5 holes When a PS9Z-6R1F is installed on PS6R A A Sensors 1 Automation Software Panel cut-out PS9Z-6R2F (Side-mount Panel Mounting Bracket) 56 4-M4 or ø4-4.5 holes (Front view) (Side view) When a PS9Z-6R2F is installed on PS6R B C 4-M4 or 4-ø4.5 holes D Panel cut-out (Front view) 11.8 (Side view) Mounting Screws (M3 6 countersunk screw) Communication When using a PS9Z-6RM* Voltage Expansion Module When using a PS9Z-6RS1 Dimension Table A B C D E Barriers PS6R-G Mounting Screws 17.2 Mounting 27.8 Screws E
5 The PS6R should be placed in a proper enclosure. It is designed to be used with general electrical equipment and industrial electric devices. Operation otes 1. interruption may indicate blown fuses. Contact IDEC. 2. The PS6R contains an internal fuse for AC input. When using DC input, install an external fuse or DC input. To avoid blown fuses, select a fuse in consideration of the rated current of the internal fuse. Rated Current of Internal Fuses Part o. Internal Fuse Rated Current 4A PS6R-G24 6.3A 1A -- Avoid overload and short-circuit for a long period of time, otherwise internal elements may be damaged. -- DC input operation is not subjected to safety standards. Installation otes The PS6R can be installed in the direction shown below only. Up Vertical When using PS9Z-6R1F Panel Mounting Bracket When using PS9Z-6R2F Side-mount Panel Mounting Bracket Do not close the top and bottom openings of the PS6R to allow for heat radiation by convection. Maintain a minimum of 2mm clearance around the PS6R, except for the top and bottom openings. When derating of the output does not work, provide forced air-cooling. Make sure to wire the ground terminal correctly. For wiring, use wires with heat resistance of 6ºC or higher. Use copper wire of the following sizes. Wires of the following sizes must be used to comply with U58, CSA C22.2 o Model Terminal Wire Size/o. of Wire Wire Type Input AWG, 1-wire AWG, 1-wire, (18 AWG - 7A, PS6R-G24 16 AWG - 1A, 14 AWG - 15A) DC OK AWG, 1-wire (stripped wire length: 6 to 7mm) Input AWG, 1-wire AWG, 2-wire Use the same size wire for each terminal (18 AWG - 7A, 16 AWG - 1A, 14 AWG - 15A) DC OK PS9Z-6R 12 AWG, 1-wire AWG, 1-wire (stripped wire length: 6 to 7mm) AWG, 1-wire (18 AWG - 7A, 16 AWG -1A, 14 AWG - 15A) Copper Solid/Stranded Copper Solid/Stranded Use with U-listed ring/ fork crimp terminal. Copper Solid/Stranded Operating Instructions Torque, in-ibs ( m) 7. (.8) 7. (.8) Applicable Crimp Terminal ø3.6 min. (reference) 6.6 max. 4 max. 5.5 min. Recommended tightening torque of the input and output terminals is.8 m. The output voltage can be adjusted within ±1% of the rated output voltage by using the V.ADJ control. ote that overvoltage protection may work when increasing the output voltage. When large shocks or heavy vibrations on the PS6R are expected, the use of DI rail or PS9Z-6R2F side-mount panel mounting bracket is recommended. Series Operation The following series operation is allowed. Connect Schottky barrier diodes as shown below. voltage expansion modules cannot be connected in series. (a) oad oad Select a Schottky diode in consideration of the rated current. The diode s reverse voltage must be higher than the PS6R s output voltage. Parallel Operation Parallel operation is possible to increase the output capacity. voltage expansion modules cannot be connected in series. oad When increasing the capacity, observe the following. 1. Maintain the operating temperature below 4ºC. 2. cannot be connected directly in parallel operation. Connect a diode to the output of each PS6R. 3. terminal voltage of both power supplies must be the same. Also, maintain the voltage difference between the power supplies below 3mV. 4. Use load lines of the same diameter and length. 5. Set the output voltage higher for the amount of diode forward voltage drop. 6. Turn on the inputs at the same time. 7. Select a diode in consideration of: Diode s reverse voltage must be higher than the PS6R s output voltage. Diode s current must be three times the PS6R s output current. Provide a heat sink for heat dissipation. (b) oad OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 171
6 OI Touchscreens PS6R-6RM1/M2/M3 Voltage Expansion Module PS9Z-6RM3/M4/M6 Voltage Expansion Module PS6R-6RS1 PCs Automation Software (PS6R-6RM5 shown) PS6R- 24/PS9Z-6RS1 Marking ame Description, Input Terminal Voltage range: 85 to 264V AC/11 to 35V DC Ground Terminal Be sure to connect this terminal to a proper ground., DC Terminals : Positive output terminal : egative output terminal VR.ADJ Voltage Adjustment Allows adjustment within ±1%. Turning clockwise increases the output voltage. DC O Operation Indicator (green) ights on when the output voltage is on. DC OW ow Indicator (Amber) ights on when the output voltage drops approximately 8% of the rated value. DC OK DC OK ights on when the output voltage is more than 8% of the rated value. P transistor output (5V DC max., 5 ma max.) PS9Z-6RM Marking ame Description +5V, +12V, +15V DC Terminal +5V side, +12V side, +15V side -5V, -12V, -15V DC Terminal -5V side, -12V side, -15V side COM DC Terminal V side (wired internally to of PR6R-J24) Sensors Communication Barriers Characteristics Operating Temperature vs. Current (Derating Curves) Current (%) Operating Temperature (ºC) Current vs. Input Voltage (Derating Curves) (Ta=25ºC) (ACV) 85 1 (DCV) Operating Temperature approved by Safety Standards Part o. U58, CSA C22.2 o E695-1, E5178 6ºC 6ºC PS6R-G24 6ºC 6ºC 55ºC 6ºC PS9Z-6R 55ºC 6ºC Current (%) Input Voltage(V) Voltage (%) Overcurrent Protection Characteristics Overcurrent Protection PS6R- 24 Characteristics PS9Z-6RM* Pulse Current (Approx. 3A rms, 4A peak) Input Current (%) 15% 1 12% 95% F24 G24 J
7 PS6R- 24/PS9Z-6RS1 Marking ame Description PS6R-6RM1/M2/M3 Voltage Expansion Module Parts Description, Input Terminal Voltage range: 85 to 264V AC/11 to 35V DC PS9Z-6RM3/M4/M6 Voltage Expansion Module (PS6R-6RM5 shown) Ground Terminal Be sure to connect this terminal to a proper ground., DC Terminals : Positive output terminal : egative output terminal VR.ADJ Voltage Adjustment Allows adjustment within ±1%. Turning clockwise increases the output voltage. DC O Operation Indicator (green) ights on when the output voltage is on. DC OW ow Indicator (Amber) ights on when the output voltage drops approximately 8% of the rated value. DC OK DC OK ights on when the output voltage is more than 8% of the rated value. P transistor output (5V DC max., 5 ma max.) PS9Z-6RM Marking ame Description +5V, +12V, +15V DC Terminal +5V side, +12V side, +15V side -5V, -12V, -15V DC Terminal -5V side, -12V side, -15V side COM DC Terminal V side (wired internally to of PR6R-J24) Operating Temperature vs. Current (Derating Curves) Current (%) Operating Temperature (ºC) Current vs. Input Voltage (Derating Curves) (Ta=25ºC) (ACV) 85 1 (DCV) Current (%) Input Voltage(V) Operating Temperature approved by Safety Standards Part o. U58, CSA C22.2 o E695-1, E5178 6ºC 6ºC PS6R-G24 6ºC 6ºC 55ºC 6ºC PS9Z-6R 55ºC 6ºC Characteristics PS6R-6RS1 Overcurrent Protection Characteristics PS6R- 24 Overcurrent Protection Characteristics PS9Z-6RM* Voltage (%) Pulse Current (Approx. 3A rms, 4A peak) Input Current (%) 15% 1 12% 95% F24 G24 J24 24 OI Touchscreens PCs Automation Software Sensors Communication Barriers IDEC (4332) USA & Canada 173
PS6R 480W Switching Power Supply
ew Series PS6R 4W Switching Power Supply Reduced size and high efficiency cuts operating costs. Energy-saving 93% Efficiency Space-saving 85mm wide Efficiency (%) 96 94 92 88 86 84 82 Competitor A Competitor
More informationPower Supplies. Automation & Sensing.
Automation & Sensing Selection Guide... 166 PS6R Standard Series... 167 Part umbers... 167 Specifications... 168 Dimensions... 17 PS5R-V Series... 174 Part umbers... 174 Specifications... 175 Dimensions...
More informationSwitching Power Supplies
Switching Power Supplies PS5R-V Series PRODUCT DESCRIPTIO DI-rail mount switching power supplies with global approvals for both industrial and hazardous locations KEY FEATURES Compact size preserves panel
More informationSwitching Power Supplies
Switching Power Supplies PS5R-V Series PRODUCT DESCRIPTIO DI-rail mount switching power supplies with global approvals for both industrial and hazardous locations KEY FEATURES Compact size preserves panel
More informationPS5R-S. Switching Power Supplies
TREICHL-ATM Electronic Auf der Bült 1-12 D 41189 Mönchengladbach Tel. 2166 8545 Fax 2166 8547 email: atm@treichl.de internet: www.atm-treichl.de PS5R-S Switching Power Supplies Class Create More Space
More informationPower Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies
Standard Series Standard Series Switching Part Numbers Part Number Item Watts Rated Voltage Rated Current -A V DC 1.A -A 7. V DC.6A -A24 24V DC.3A -B V DC 2.A Key features of the standard series include:
More informationPower Supplies. Automation & Sensing. Selection Guide
Automation & Sensing Selection Guide... 14 PS5R Slim Line Series... 141 Part Numbers... 142 Specifications... 143 Dimensions and Terminal Markings... 145 PS5R Standard Series... 147 Part Numbers... 147
More informationPower Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies Part Numbers
Standard Series Key features: Wide power range: 7.W-4W Universal input : 7.W-W: 8-264V /1-37V DC W: 8-2V /17-264V 24-37V DC (selectable) W, W, 24W: 8-264V /11-3V DC 4W: 3 phase: 32- V 3 phase: 3- V Overcurrent/overvoltage
More informationRelays & Sockets. RQ Series PCB Relays
RQ RQ Series PCB Relays IDEC RQ relays are low-profile, PCB relays in a compact package. Size equals value. RQ relays are small, yet maintain high contact ratings and long operational life. For larger
More informationINDUSTRIAL POWER SUPPLIES SFL-SERIES
INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial
More informationSwitching Power Supply
Switching Power Supply Easy-to-use Industrial Power Supply with Versatile Functions (); Power Supply Suitable for Peak Loads such as Motors and Solenoids (-P) Remote control function incorporated. Remote
More informationOrdering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES
Switching Power Supply S82F Industrial-Grade Power Supply for General or Peak Load Applications Correct input voltage range is automatically selected: 1 VAC or 2 VAC. Model S82F-P is suitable for peak
More informationDPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
More informationDPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationDPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationDPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
More informationRelays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada
Key features: SPDT through PDT, 0 contacts Midget power type relays vailable in pin and blade terminal styles. Options include an indicator, check button for test operations and side flange. Series Power
More informationDPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
More informationNRA Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute
RA Series RA Series Key features of the RA series include: Available in 5 different styles Excellent overload and short circuit protection Small size and high-efficiency Life expectancy of over 0,000 operations
More informationSection. Circuit Breakers Selection Guide...N-2. NRA Series...N-3. NRBM Series...N-13. NRC Series...
Section Selection Guide...-2 RA Series...-3 RBM Series...-3 RC Series...-20 General Instructions...-29 Internal Circuit Overview...-29 for more information on this product family visit www.idec.com/circuitbreaker
More informationMODEL MMC8A-1 MMC8A-2 MMC8A-3 V1 +5V 1.2A +5V 1.1A +5V 1.2A DC OUTPUT V2 +12V 0.1A +15V 0.1A +12V 0.1A V3-12V 0.1A -15V 0.1A -5V 0.
Unit type 8A Ordering information 8A -1 -O 1 2 3 4 R 1Series name 2Output wattage 3Output voltage combination 4Optional G :Low leakage current N :with Cover MODEL 8A-1 8A-2 8A-3 V1 +5V 1.2A +5V 1.1A +5V
More informationSwitching Power Supply
Switching Power Supply Miniature DIN-track Mounting DC-DC Power Supplies 3- and 7.5-W models. Inputs: 10 to 27 VDC (DC input) Outputs: 5, 12, 15, 24, ±12, and ±15 V. 65 mm depth enables mounting onto panels
More informationECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
More informationZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
More informationTDK-Lambda ZWS240BP/A SPECIFICATIONS
SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average
More information<Designed to meet harmonic current regulations> Board type, ultra-small size, and low cost
SERIES Board type, ultra-small size, and low cost Ordering Information Switching power supplies General Description 2. Allowable Input Voltage Range AC85
More informationSignaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility
Unique Striped Design Improves Visibility Key features of the LD6A LED SignaLight Towers include: The striped design with non-illuminated area between the lenses makes the illuminated color very visible.
More informationSafety Control HR1S-AC. Safety Relay HR1S-AC
HRS-AC Safety Relay HRS-AC Key features: NC or 2NC safety input type, such as E-Stops or Interlock Switches EN ISO 3849- PLe, Safety Cat 3 compliant, and EN 6206 SIL 3 Fault diagnosis function with dual
More informationRelays. Industrial Automation Catalog Section - U906. Selection Guides. General Purpose Relays RU Series RR Series
Industrial Automation Catalog Section - U906 Relays Selection Guides General Purpose Relays RU Series RR Series For up-to-date information, or to request a full copy of this catalog, contact us at www.idec.com
More informationPower ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase
New Product Switch Mode Power Supply S8VK-T (120/240/480/960 W Models) Worldwide 3-phase Power Supply Resistant in tough environments Easy and fast installation The most compact class on the market Wide
More informationPRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.
0-10V Dimmable FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 24V Auxiliary Output 0-10V Dimming Control Dimming 1 ~ 100 Flicker Free High Operating Ambient Temp.:
More informationDC9~ typ max 40max 80max. 71 typ max. 120max 120max. 120max. 120max. 60max. 48max. 20max
ZU SERIES DC/DC CONVERTER ZUS1R R Thin profile Isolated between input-output Built-in overcurrent protection circuit UL recognized, TÜV approved, CSA certified Five-year warranty ORDERING INFORMATION ZUS1R120
More information22mm XW E-Stops. IEC , EN , JIS C , UL508, UL991, NFPA79, CSA C22.2 No. 14, GB
ø22mm XW E-Stops Circuit Breakers Terminal Blocks ors Timers elays & Sockets Signaling ights 22mm XW E-Stops Key features: The depth behind the panel can be as little as 46.4 mm for 1 to 4 contacts (with
More informationRWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
More informationS8VK-S (30/60/120/240/480-W Models)
New Product Switch Mode Power Supply S8VK-S (3/6/1/2/48-W Models) A Perfect Fit for Small Control Panels Coated PCBs for Better Resistance to Environment Connections for Easy Wiring Operation possible
More informationAdvanced Battery Charger. 3 - stage charging capability (IUOU) 4.1 A / 100VAC 1.8A / 240VAC
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More informationRated load current (resistive load) SRP. Min. 0.9 (max. 25 of difference between voltage phase and current phase)
SRPH1 Series Single Phase, Analog Input Type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC
More information1 Form A 5A small size power relay for interface
1 Form A 5A small size power relay for interface PQ RELAYS RoHS compliant Protective construction: Sealed type FEATURES 1. Compact and slim 20 mm (L) mm (W) 16 mm (H).787 inch (L).394 inch (W).630 inch
More informationEmergency lighting units EM powerled
EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage
More information720 W / 24 V On-board Battery Charger. for industrial applications. Product Data Sheet
for industrial applications Product Data Sheet 720 W / 24 V On-board Battery Charger for industrial applications Features IP65 protection degree Battery selection via GUI, supporting all leading battery
More informationSwitches & Pilot Devices
Key features: Two button sizes: ø29 and ø4mm ead-free, ohs compliant, (EU directive 22/95/EC) Depth behind the panel: Standard - only 27.9mm for 1 to 4 contacts Unibody - only 23.9mm for 1NC or 2NC IDEC
More informationMODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
More informationSealed type washable 1C H-1C-C 812H-1C-V 812H-1C-S (SPDT) F 812H-1C-C F 812H-1C-V F 812H-1C-S F
8H Type List 8H Terminal style Contact form Features Miniature PCB Power Relays A 2VAC. High CTI 2 material or product comply with IEC 33-1 are available. UL Insulation Class F. VDE, UL/CUL, TUV, CSA/CUS
More informationNRBM Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute
NRBM circuit breakers are the largest in rated current (A to 50A) among the IDEC circuit breakers series. These small sized, high-effi ciency breakers offer a variety of protection characteristics that
More informationTDK-Lambda ZWS300BAF/A
ZWS3BAF/A SPECIFICATIONS A254-1-1/A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V 12 15 24 36 48 2 Maximum Output Current A 25.. 12.5 8.4
More information22mm XW E-Stops. UL File #E68961 CCC No Specifications
XW Series 22mm XW E-Stops Key features: The depth behind the panel is only 48.7 mm for 1 to 4 contacts (with terminal cover) for illuminated and non-illuminated units. IDEC s original Safe break action
More informationEmergency lighting units EM powerled
EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage
More informationModels. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery
AC/DC Battery Controller Power Supply TSPC-240UPS Series Compact universal 24 VDC power supply with integrated battery controller module Battery protection for over voltage, deep discharge, short circuit
More informationInsulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit
SSR with Failure Detection Function Detects failures in SSRs used for heater temperature control and simultaneously outputs alarm signals. This product supports the safe design of heater control systems,
More information(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
More informationRU Series Universal Relays
Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal
More informationPOWER SUPPLIES. Control Transformers p8-1 Modular Power Supplies p8-2 Switching Power Supplies p8-3 Automatic Battery Chargers p PAGE
8 POWER SUPPLIES Control Transformers p8-1 Modular Power Supplies p8-2 Switching Power Supplies p8-3 Automatic Battery Chargers p8-10 Perth (08) 9248 0410 Sydney (02) 9676 1671 Melbourne (03) 9706 4599
More informationRoHS-Compliant Brushless Motor Systems FBL Series. Features
Speed Control Systems RoHS-Compliant Brushless Motor Systems FB Series The FB Series consists of a high performance, compact, brushless motor and driver. This product is available with 75 W (1/1 HP) and
More informationElectronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
More informationPower Supplies. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high effi ciency and compact size with new visual diagnostic LEDs
More informationPOWER-WIN TECHNOLOGY CORP.
FEATURES Medical 60601-1 3.1 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS
More informationPower ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase
New Product Switch Mode Power Supply S8VK-T (120/240/480/960 W Models) Worldwide 3-phase Power Supply Resistant in tough environments Easy and fast installation The most compact class on the market Wide
More informationSoft Starter. Types RSBD. Product Description. Type Selection. Ordering Code RSB D E V 61 HP
Soft Starter Three-Phase Scroll Compressor Soft Starter Types RSBD Soft starting of 3-phase scroll compressors up to 95Amp Patented auto-adaptive algorithm for optimum inrush current reduction (No user
More informationSorensen XG 1700 Series 1700 W A Watt, 1U Programmable DC Power Supplies V. Key Features. Key Modes
Sorensen XG 1700 Series 1700 W 1700 Watt, 1U Programmable DC Power Supplies 6 600 V Industry Leading Power Density Up to 1700 Watts in 1U Standard Digital Interfaces USB&RS232/485 LXI Ethernet and Isolated
More informationDC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationPRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
More informationMD60 Series 60W DINergy Power Supply
MD60 Series 60W DINergy Power Supply Features Compact size, high efficiency and DIN Rail mounting 60 C rated provides full power/no derating required 100-240VAC wide-range auto-selection input Overcurrent,
More informationXA Series Emergency Stop Switches (w/removable Contact Block)
XA ø6 XA Series Emergency Stop Switches (w/removable Contact Block) The World s First ø6 mm, 4-contact Emergency Stop Switch. Compact size - only 7.9 mm deep behind the panel. Reliable Safe break action.
More information(DC/DC) SERIES to 96.5% (typical) Product Lineup. Ordering Information. Features. General Description. Super high efficiency
SERIES (DC/DC) "TESLA Converter" (next-generation power supply) adopted : ultra small size and super high efficiency.chassis module/open-frame type Super high efficiency 94.5 to 96.5% (typical) Ordering
More information881WP. Type List. Ordering Information 881 WP1-1A C - - C Basic series designation 4. C -- Contact material AgNi
Type List Terminal style WP (High power type, terminals)-.0mm pitch Contact form A (SPNO) Features Low Profile mm w/ fasten terminals. High Rating 7A 277VAC. High temperature withstand up to 2. UL/CUL
More informationCircuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions Accessories
Switching & ontrols Selection Guide... 922 1V Series... 923 Dimensions... 929 Accessories... 932 ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks
More informationFLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT
FLAT/VERTICAL TYPE HIGH POWER BIFURCATED CONTACT NC NC RELAYS Flat type Flat type (PC board) (PC board) FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic design achieves 10.9
More informationGT5P Series ON Delay Timers
T5P Series T5P Series ON Delay Key features of the T5P series include:, 5A contacts 8-pin, octal base 9 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing
More informationMiniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
More informationD R C- 4 0 s e r i e s
LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /
More informationTeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
More informationInput voltage Power rating Output voltage Output current With Front mounting Bracket. With DIN-rail mounting Bracket 400/480 VAC
Three-phase Input Switch Mode S8PE DIN-rail mounting, 3-phase input Switch mode Supply with a range of 5A to 40A output current 3 phase 400/480 or 200/230 VAC input 5, 10, 20 and 40A; 24 VDC output Higher
More informationDIN Rail Power Supplies
DIN Rail Power Supplies Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced
More informationEmergency lighting units EM powerled
EM power EM power BASIC 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60
More informationDC (on) LED Signal. Multiple output connector for easy wiring
DIN Rail Mount, 5 x 7.5 mm or 5 x 5 mm Wide Power Range (0W-9W) Wide Adjustment Range Rugged for Industrial Use High Efficiency Lightweight and Compact Design year warranty Short Circuit Protection Overvoltage
More informationø22mm HW Series Control Units Control Units
mm HW Series Control Units Control Units HW Series Control Units (Selection Guide) Function Emergency Stop Switch (Unibody Type) Emergency Stop Switch (Separate Type) Pushlock Turn eset Category ø40mm
More informationSafety Relay Unit. Ordering Information. Ideal for Safety Door and Emergency Stop Switch Circuits for Machines in European Countries
Safety Relay Unit Ideal for Safety Door and Emergency Stop Switch Circuits for Machines in European Countries Two-pole slim models that are only 22.5 mm wide, three-pole models that are only 68 mm wide,
More informationRSS Series Panel Mount Solid State Relays. 4,000 RMS (minute)
RSS Series Panel Mount Solid State Relays Key features of the RSS series include: Photo isolation 1,200 volt blocking voltage 4,000 volt optical isolation Zero voltage turn-on 100% tested at rated current
More informationModel Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
More informationSwitch Mode Power Supply S8VS
Switch Mode Power Supply S8VS Monitor Functions for Replacement Timing and Total Run Time in a Compact Size. 180-W Models added to the series. Compact size (40 (W) 95 (H) mm) (60-W Models) Large 3-digit,
More informationsensors SA1C-F High-speed Fiber Optic: SA1C-F
High-speed Fiber Optic: Key features: Ideal for remote sensing applications Featuring quick-connect cable and easy-insert fiber optic units for simple installation Through-beam and reflected-light sensing
More informationFeatures. Description. Table of Contents
Features Very low profile Very high efficiency (typically 90%) Single and dual output versions Input voltages from 24V to 110VDC nominal voltages from 5V to 48VDC -40 C to +71 C operation without de-rating
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationFeatures. Type List. Ordering Information S - 1A - - C - Contact Rating
Features Heavy duty A VAC, A VAC power type. AC & DC coils are both available. PCB terminals and quick terminal types. Optional for special large contact gap 3.0mm version. SPNO-ST & DPNO-ST contact configuration.
More informationNO NO NO. Standard Interlock Safety Switches HS6B. HS5E-K Key Locking Safety Interlock Switches
Standard Interlock Safety Switches HS6B HS5E-K Key Locking Safety Key features: Head removal detection circuitry. High-security pin tumbler key types are used. Sixteen types of key numbers are available,
More informationAdvanced Battery Charger. 3 - stage charging capability (IUoU) 25A
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More informationCircuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions...
Switching & ontrols Selection Guide... 1028 1V Series... 1029 Dimensions... 1035 www.ide.com/circuitbreaker ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal
More informationSurface mounting, flush mounting, and DIN track mounting
Solid-state Timer H3JA Economical, Compact, Plug-in Timer Time limit, ON-delay, operation with automatic resetting. DIN size (36 x 36 mm), fits standard 8-pin sockets. Wide choice of supply voltages: 24,
More informationElectronic circuit breaker EBU10-T
Description The electronic circuit protector type EBU10-T (Electronic Breaker Unit) provides selective overcurrent protection in AC 230 V UPS systems. It consists of an MCB approved for short circuit interruptions
More informationLS200 Series Instruction Manual
LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit
More informationSolenoid Locking Safety Switches
HSC HSC Full Size Solenoid Locking Switches Key features: Rugged aluminum die-cast housing 00N locking retention force Flexible Installation: The actuator can be accessed from two directions Select from
More informationNEW The new PROmax power supplies offer a wide range of robust solutions for demanding application requirements.
Datasheet Single- and three-phase switched-mode power supply units NEW The new power supplies offer a wide range of robust solutions for demanding application requirements. C SEMI F47 US Designed for high
More informationSA1W: Water Detection Sensors
Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com The SA1W is the fastest, most reliable
More informationSorensen XG Series / XTR Series W A. 850 W, 1U Half Rack Programmable DC Power Supplies V
Sorensen XG Series / XTR Series 670 850 W 850 W, 1U Half Rack Programmable DC Power Supplies 6 600 V Highest Power Density Comprehensive Digital and Analog Interface Options Scalable, Multi-Unit Design
More informationTable of Contents LED Machine Lighting - Pg. 1 Automation & Sensing - Pg. 27 Safety - Pg. 255 Switching & Controls - Pg. 449 Index - Pg.
Automation & Sensing Selection Guide... 222 Relay... 224 EB3C Relay... 224 EB3 Safety Relay... 229 amp... 234 EB3 amp... 234 General Information... 248 www.idec.com/barriers PCs Table of Contents ED Machine
More informationMiniature Relay PT 2 pole 12 A, 3 pole 10 A or 4 pole 6 A DC- or AC-coil
2, 3 or 4 C/O contacts Switching performance up to 3000 VA Relay height 29 mm Cadmium-free contact material Mechanical indicator Manual test tab, optionally lockable. White marking tabs Applications Universal
More informationIsolated and rugged 24 Vdc power for battery powered electronic control systems on rail equipment
TECHNICAL DATASHEET #TDAX083200 Isolated 110Vdc/24Vdc Converter 110V, 96V or 72Vdc Nominal Input Optional Enable Input 24Vdc Output, 240W P/N: AX083200 or AX083201 or AX083202 Isolated and rugged 24 Vdc
More informationOiltight Switches & Pilot Devices
Oiltight Emergency Stop Stations Part Numbers: Emergency Stop Stations Description Contacts Plastic Bezel Metal Bezel Ø 40mm Pushlock Turn Reset 1NO-1NC HW1X-BV411-R* HW4X-BV411-R* 2NC HW1X-BV402-R* HW4X-BV402-R*
More information韩国 Autonics 进口固态继电器型号模拟固态继电器 SRPH1 SRPH1 Series SSR 比例控制继电器选型说明书 pdf Single phase, Analog input type SSR Features Power control/ Cycle control/phase c
Series Single phase, Analog input type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC
More information