High Current, High Density, Power Connectors
|
|
|
- Rosamond Harris
- 5 years ago
- Views:
Transcription
1 High Current, High Density, Power Connectors MCN1 Series Features 1. High Current Applications Board-to-board connectors are UL certified for 27 A per contact. 2. Hirose's Unique Compliant Press-fit connection to the PCB The compliant section is designed to provide reliable and damage free connection with the Plated-Through-hole, reducing stresses to the PCB. 3. Multiple Contacts in a Variety of Configurations offered with 8, 16 and 30 contacts in vertical, right angle, solder and compliant press-fit terminations. 4. UL Recognized, CSA Certified UL File No. E263 CSA File No. LR9109 View of the Compliant Press-Fit section application Compliant section PCB Min.PCB thickness = 3.2 mm
2 MCN1 Series High Current, High Density, Power Connectors Product Specifications Ratings Current rating 27 A max. (Note 1) Voltage rating 600 V AC Operating temperature range - C to +12 C (Note 2) Operating humidity level Relative humidity 9% max. (provided there is no condensation) Storage temperature range -10 C to +60 C (Note 3) Storage humidity range 40% to +70% 11.Insulation resistance 12.Withstanding voltage 13.Contact resistance 14.Vibration Item Specification Conditions 1.Heat resistance 16.Cold resistance 17.Temperature cycle 18.Humidity resistance 19.High temperature exposure 10.Operating life 11.Sulfur dioxide gas 000M ohms min. No flashover or insulation breakdown. 3m ohms max. (initial value) No electrical discontinuity of 1 ms or more No damage, cracks, or parts dislocation. Insulation resistance: 000M ohms min. No damage, cracks, or parts dislocation. Insulation resistance: 000 M ohms min. 00 V DC 2000V AC /one minute 2 A DC Frequency of 10 to 2,000 Hz, overall amplitude of 1. mm Or, acceleration of 196 m/s 2 for 2 hours in each of 3 directions. Expose to a temperature of +12 C for 96 hours. Expose to a temperature of - C for 96 hours. (- C: 30 minutes 1 to 30 C: minutes max. 12 C: 30 minutes 1 to 30 C: minutes max.) 20 cycles 6 days at temperature of 40ç±2ç and humidity of 90% to 9% 100 hours at temperature of 8ç 1000 cycles Leave for 96 hours in an atmosphere of 2 ppm concentration sulfur dioxide gas. Note1: Refer to "Current-Temperature De-rating Curve" (IEC 12-3, Test b) and "Temperature Rise Curve" (IEC 12-3 Test a) on Page 3. Note2: The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Materials Product Pin headers Receptacles Part Material Finish Remarks Insulator Contacts Insulator Contacts Ordering Information Copper alloy Copper alloy Black Gold plating Black Gold plating MCN 1-30 P 3 - DS UL94V UL94V Series name : MCN1 2 Number of contacts : 8, 30 3 Connector type P : Pin header S : Socket Receptacle 4 Rows 2 : 2 rows 3 : 3 rows Contact type PFA : Press-fit (through-hole diameter 2.03 mm) DS : Right-angle through-hole type 2
3 MCN1 Series High Current, High Density, Power Connectors Current - Temperature De-rating Curve (IEC 12-3, Test b) MCN1 Series De-rating Curve (Base Line) Current Flow (A) Temperature Rise Curve (IEC 12-3, Test a) Ambient Temperature ( C) Measurements were made with 12 AWG wire connected in series to all contacts. MCN1 Series Temperature Rise Curve 30 Conductors 8 Conductors Current Flow (A) 30 Conductors 8 Conductors Temperature Rise ( C) Measurements were made with 12 AWG wire connected in series to all contacts. 3
4 MCN1 Series High Current, High Density, Power Connectors Receptacle: Straight, Press-Fit 2-row type PCB mounting pattern ±0.1 1±0.0 ±0.0 Copper plating thickness : 70 ± 10 μm Solder plating thickness : to10 μm Board thickness : 3.2 mm min. 3-row type A Fasten to the board being sure to use (American type) #2 tapping screws. Recommended Through-Hole Diameter Finished hole : 2.03 dia. ± 0.0 mm Drill diameter : 2.18 dia. ± 0.02 mm ±0.0 ±0.0 Ø ±0.1 ± ±0.1 ) 30- Ø2.03 ±0.0 2-( Ø A ± Ø2.4 Part Number CL No. MCN1-8S2-PFA Ø2.03± PCB mounting pattern 7.4 Ø1.93 Copper plating thickness : 70 ± 10 μm Solder plating thickness : to10 μm Board thickness : 3.2 mm min. Fasten to the board being sure to use (American type) #2 tapping screws. Recommended Through-Hole Diameter Finished hole : 2.03 dia. ± 0.0 mm Drill diameter : 2.18 dia. ± 0.02 mm Part Number CL No. MCN1-30S3-PFA
5 MCN1 Series High Current, High Density, Power Connectors Pin Header: Right-Angle Through-hole 2-row type Ø2.4 PCB mounting pattern 1±0.1 ±0.0 8-Ø2.03 ±0.0 2-( Ø3.12 ) Part Number CL No. MCN1-8P2-DS row type A Ø ± ±0.0 ± ± ±0.1 ± ± ±0.1 PCB mounting pattern 30- Ø2.03 ±0.0 2-( Ø ±0.1 ) A 3.71 Part Number CL No. MCN1-30P3-DS
6 MCN1 Series High Current, High Density, Power Connectors NOTES : 6
7 NOTES : MCN1 Series High Current, High Density, Power Connectors 7
8 Powered by TCPDF ( MCN1 Series High Current, High Density, Power Connectors USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 2688 Westhills Court, Simi Valley, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. North California Office Stevens Creek Blvd., Ste 20, Cupertino, CA 9014 Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) Professional Center Drive, Suite #100C Livonia, MI 4814 Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D Ostfildern (Scharnhauser Park) Phone : Fax : CHINA: HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE A1001, Ocean International Center, Building 6# East 4th Ring Middle Road, Chao Yang District, Beijing, Phone : Fax : HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Unit 1102 A&B, Energy Plaza, 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : Fax : KOREA: HIROSE KOREA CO., LTD , Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : ,7124 Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg # CC Amsterdam Z-O Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD , Cross Tower Building, 318 Fuzhou Road, Huang Pu District, Shanghai Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD F, No.87, Zhengzhou Rd., Taipei Phone : Fax : UK: HIROSE ELECTRIC EUROPE B.V. UK BRANCH First Floor, St Andrews House, Caldecotte Lake Business Park, Milton Keynes MK7 8LE Phone : Fax : CHINA: HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre 002, ShenNanDong Road, ShenZhen City, Guangdong Province, Phone : Fax : SINGAPORE: HIROSE ELECTRIC CO., LTD. 10 Anson Road #26-16 International Plaza Phone : Fax : ,OSAKI -CHOME,SHINAGAWA-KU,TOKYO ,JAPAN PHONE: , FAX: The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors
0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors FH19C Series/FH19SC Series FH19C FPC/FFC thickness: 0.2±0.0mm Actuator color: Brown Features 1. Low-profile 0.5mm pitch FPC/FFC Connectors Miniaturization
0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors
0.5 mm Pitch, 2 mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator Contacts are designed to hold and stabilize the actuator
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series BM20 2.3mm Existing products 2.98mm Receptacle A 22.3% reduction in size! 2.98 0.4 =About 3.0mm2 Header BM20 2.3
Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
Ultra Low-profile Interface Connectors with.0 mm Mounting Height LX Series Jul.1.017 Copyright 017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low profile on the PCB When mounted on the
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors
0.4 mm Pitch, 0.6 and 0.8 mm Height, Board-to-Board and Board-to-FPC Connectors BM20 Series Receptacle Existing products BM20 2.3mm 2.98mm 10.4mm 10.48mm Existing products A 22.3% reduction in size! BM20
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors
0.4 mm Pitch, 1.5 mm Mated Height, Board-to-Fine Coaxial Cable Connectors DF36 Series High contact reliability Effective mating length of 0.4 mm 1.5±0. (Mated height) (0.4) (Effective mating length) Enhanced
0.5 mm Pitch, Board to Board Connector with Floating Structure
0.5 mm Pitch, Board to Board Connector with Floating Structure FX20 Series X direction Floating range :0.6 0.8mm Y direction Floating range :0.6mm Features 1. 0.5 mm pitch 2. Connection type: Right angle
3.5mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard)
3.mm Pitch Miniature Double Row Connector for Secondary Power (Compliant with UL/CSA Standard) MDF6 Series Inner type positive lock Features 1. Miniature type with 3.mm pitch A miniature, space-saving
Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156HF Series Halogen Free Features 1. Low insertion loss 0.1 db typical at 6 Hz (not mated with the plug). 2. Space-saving design 2.7 mm x 2.7 mm
High Current Plug-in Connector
High Current Plug-in Connector PS3F Series Front access is best suited to the systems with limited rear access. No working space Overview High current plug-in connector Contributes
Miniature push-pull connectors with ground function
Miniature push-pull connectors with ground function MXR Series Jul.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Product Specifications Ratings Rated current Rated voltage Features
High Voltage Wire-to-Board Connectors
High Voltage Wire-to-Board Connectors MDF51 Series Simple and secure mating with one push Socket Header Lock Fig.1 Features Secure hold during the soldering operation 1. Simple, one step mating Built-in
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment IX Series Contribution to size reduction Compact size 75% reduced size compared to RJ-5 Overview Multi-purpose
0.8mm Pitch, Compact and Robust Wire-to-Board Connectors
0.8mm Pitch, Compact and Robust Wire-to-Board Connectors DF52 Series Small and robust structure Board side Cable side Thick wall parts Thick wall parts Features 1. Small-sized connector 0.8mm Pitch, 1.75mm
Ultra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current
NEW Ultra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current BM29 Series 20% reduction in size compared with alternate Hirose s products 3.16mm BM29 6 contacts
Waterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41 Series Bayonet Lock Mating Mark Features 1. Waterproof connector designed for outdoor use Light weight, waterproof connector designed to withstand outdoor environments.
High Performance, Miniature Circular Connectors
High Performance, Miniature Circular Connectors HR22 Series Product specifications Ratings Rated current 2A Operating temperature range -25ç to +85 Rated voltage 100V AC, 140V DC Storage temperature range
High Current Connector
High Current Connector PS2 Series and signal contacts together in one unit with dedicated power contacts to handle 100, 200 or 300 Amps. 2. Floating Structure The structure allows up to ±2.5 mm of float
High speed transmission, 1mm pitch Small Interface Connector
High speed transmission, mm pitch Small Interface Connector DH Series Overview mm contact mating pitch together with a mm mounting pitch yields a more compact, lower profile, higher density alternate to
0.3mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors
0.3mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors DF56 Series High contact reliability Features 1.Small mated height and board occupied space Small pitch (0.3mm) and mated height (1.25mm)
0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board and Board-to-FPC Connectors
.4mm Pitch, 1.5 to 4.mm Height, Board-to-Board and Board-to-FPC Connectors DF4 Series Space saving Space saving Jun.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. High density
0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34SRJ Series 3.8mm Depth Features 1. Low-profile With the
2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
High Power/Signal Connectors for Industrial Machinery
NEW High Power/Signal Connectors for Industrial Machinery PQ Series Variations Non water-resistant 20 position type Contact (19 A/pin) type Non water-resistant 48 position type Contact (12.5 A/pin) type
0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors
0.4/0.5mm Pitch 1.5mm Height High Speed Transmission (5 + Gbps) FPC Connectors FH55/FH55M Series Dimensions : 40 pos 4mm (depth) 23.4mm(FH55)/19.3mm(FH55M) Features 1. High-Speed Transmission(5 + Gbps)
2mm Pitch Miniature Connector for HDD
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Circular Connectors Supporting TÜV and MIL spec.
Circular Connectors Supporting TÜV and MIL spec. H/MS Series Product Specifications Standard products Ratings Ratings Features 1. Compatible with MIL spec. standard products 2. A ground circuit is provided
High Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Small I/O connectors for AC adapters
Small I/O connectors for C adapters RP34 Series Sep.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Features 1. Superior mating operability snap-and-lock
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
Power Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
Circular & Rectangular Multi-Pole Connectors MPC06
Circular & Rectangular Multi-Pole Connectors MPC06 Contents Contents... Multi-Pole Circular Connectors Specifications Table... Product Lineup... P Quick Locking Type... - 7 0P Quick Locking Type... - 0
3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
3.3mm Pitch Small Size Connectors for Internal Power Source
3.3mm Pitch Small Size Connectors for Internal Power Source DF33C Series Positive Lock Completely enclosed locking system Features 1. 5 mps capacity When used with 20 WG wire, this connector has a maximum
Product Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
Miniature Waterproof Plastic Connectors
Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 32.3 3 and 6 pos. Ø12.6 Features 1. Small-size with low profile 3, 6 contacts: Maximum outer diameter Ø12.6mm Mated length 32.3mm (from
0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
Miniature Waterproof Plastic Connectors
Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 32.3 3 and 6 pos. 42.1 Ø15.5 Ø12.6 10 and 12 pos. Fig.1 Features 1. Small-size with low profile 3, 6 contacts: Maximum outer diameter
Power Supply Connectors For Industrial Equipment
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single
CONNECTING THE FUTURE. Interconnect Lighting Solutions
CONNECTING THE FUTURE Interconnect Lighting Solutions HIROSE WIRE-TO-BOARD CONNECTORS Hirose s interconnect products offer innovation, versatility and low profiles for your LED engineered designs. With
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI20/21 Series (a)space-saving design 7.0 51.75 Features 1. Compact design occupies minimum space Connectors are designed with small
I/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
High Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
SC05 E-04. AC Inlets Power Supply Connectors
ELECT R O N I C COMPONENTS SC0 E-0 AC Inlets Power Supply Connectors Contents Contents... AC Inlets AC Inlets... AC Inlets (for Lead Wire)... Power Supply Connectors Low-Profile Type Poles... 6 Poles...
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
HS6B Subminiature Interlock Switches
World-class compactness with three poles of contacts. World s smallest switch: 30 30 78 mm Dual contacts and monitor contacts achieve the highest safety category (ISO 13849-1, EN 954-1) Two actuator entry
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
PARALLEL PROCESSING UPS E33A
PARALLEL PROCESSING UPS E33A Low energy, high quality, high reliability parallel processing type UPS E33A Supporting network PARALLEL PROCESSING UPS Parallel operation backup time Input AC380, 400, 415,
High Current Connector
High Current Connector Series 1U Nov.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features 1. Power contact supports up to 10 mps (210/1pin Derating curve, ambient temp 2 C) with
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
Compact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth
Miniature Waterproof Plastic Connectors
Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 32.3 3 and pos. Ø12. Features 1. Small-size with low profile 3, contacts : Maximum outer diameter Ø12.mm Mated length 32.3mm (from the
0.4 mm Contact Pitch, Board-to-FPC Connectors
0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure Two-point contact system Features 1. Two stacking height options Two separate heights
High Performance Vector Control Drive Manual Supplement
YASKAWA AC Drive-A1000 High Performance Vector Control Drive Manual Supplement Supplement to: A1000 Quick Start Guide TOEPC71061641C Type: CIMR-AU A Models: 200 V Class: 0.4 to 110 kw (3/4 to 175 HP
Circuit Protectors TBC05 E-03
Circuit Protectors TBC05 E-03 Contents Contents 1 Notice 1 Specifications ist 2 Example of Used 3 TBC5000 Series Manual Reset Type and Auto Reset Type 4 12 TBC6000 Series Manual Reset Type 13 17 Notice
Product Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
ER circuit breaker - Hydraulic magnetic,
ER circuit breaker - Hydraulic magnetic, Datasheet railway, high current and voltage Features Ideal for high current and high voltage applications Precise, temperature independent operation Panel mount
0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
SNP-8 Series Single mode FC CONNECTOR PLUG - for Angled-PC, Conical Shape -
DOCUMENT NUMBER S05-H036-02E Single mode FC CONNECTOR PLUG - for Angled-PC, Conical Shape - TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN.
Modular Enclosure Solutions RACK IQ - ENTERPRISE & HYPERSCALE DATA CENTER CABINETS
Modular Enclosure Solutions RACK IQ - ENTERPRISE & HYPERSCALE DATA CENTER CABINETS DESIGN & ENGINEERING TECHNOLOGY & COMPONENTS NPI & TEST DEVELOPMENT SUPPLY CHAIN & MANUFACTURING FULFILLMENT & REPAIR
Circular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
Load Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Power PCB Relay G6D-ASI Reduced board space ideal for high-density mounting (45% smaller than the surface area of G6B). Slim package: measures 6.5 W x 17.5 L x 12.5 H mm Switches loads up to 5 A, 250 VAC/30
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
G7L. A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops. Application Examples. Model Number Legend
A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops No contact chattering for momentary drops up to % of rated. Wide-range AC-activated coil that handles 1 to 1 or to
2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
Amphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
CF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications
CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization
Miniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
IFC07 E-03. USB Connectors HDMI Connectors DisplayPort Connectors
ELEC T R ONIC COMPONEN T S IFC07 E-03 USB Connectors HDMI Connectors DisplayPort Connectors Contents Contents 1 USB3.0 Connectors Plug Cables 2 USB Connectors Mini-B Receptacles 3 Plugs 4-5 HDMI Connectors
Installation Manual. YASKAWA AC Drive Option Back-up Capacitor Unit for Momentary Power Loss. Type: P0010, P0020
YASKAWA AC Drive Option Back-up Capacir Unit for Momentary Power Loss Installation Manual Type: P0010, P0020 To properly use the product, read this manual thoroughly and retain for easy reference, inspection,
SG-B1 SERIES / SG-A1 SERIES
643 Door with Solenoid Interlock / Door Ultra-slim SG-B1 SERIES / SG-A1 SERIES Related Information General terms and conditions... F-7 General precautions... P.1501 PHOTO PHOTO Conforming to Machine &
1mm Pitch Wire-to-Board Connectors supporting LVDS signal
1mm Pitch Wire-to-Board Connectors supporting LVDS signal FX15 Series Space saving, Equal length transmission lines Termination side:.5 mm pitch, 1-row construction Mating side: 1 mm pitch, staggered 2-row
Rugged and Sealed (IP68) Plugs and Receptacles For Use with APP Powerpole Signal, Power & Ground Contacts & Housings
Rugged and Sealed (IP68) Plugs and Receptacles For Use with APP Powerpole Signal, Power & Ground Contacts & Housings The SPEC Pak Extreme uses rugged and environmentally sealed (IP68) shells to protect