GT16 Series. Subminiature Connectors for coaxial cables
|
|
|
- Howard Sullivan
- 5 years ago
- Views:
Transcription
1 GT5 Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT16 Series Subminiature Connectors for coaxial cables <In-line and board mounted.> Features Space-saving design Compact and light comparing to HRS GT5 series. Excellent high frequency performance Refer to V.S.W.R. data on the following pages. GT18W GT25 Applications GT15 GT9 GT8E In-car communication, car sensors(temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation LAN systems. 48 In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.
2 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT16 Series F Connectors (Common Use) Center terminal Part No. HRS No. Material/Plating Conductor Size Packaging RoHS GT SCF Phosphor bronze/ 24 to 28AWG 10,000 pcs/reel YES GT16-30SCF Tin plating 30 AWG Insulator (Common Use) GT16-SC PBT White M Connectors (Common Use) Center Terminals Part No. HRS No. Material/Plating Conductor Size Packaging RoHS GT PCF to 28AWG Brass/Tin plating 10,000 pcs/reel YES GT16-30PCF AWG GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 49
3 GT16 Series GT5 Insulator (Common Use) GT16 GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT18W GT9 GT15 GT8E GT25 GT13 Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT16-PC PBT White Without retainer type (F Connector) Housing GT16F-1S-HU(A) Brown PBT GT16F-1S-HU(B) Green Outer terminal Part No. HRS No. Material/Plating Insulator Diameter Outer Diameter Packaging RoHS GT16-/ SC Phosphor bronze/ Ø1.5 to 2.0 Ø2.6 to 3.4 GT16-/ SC Tin plating Ø0.6 to 0.9 Ø1.4 to
4 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Without retainer type (M Connector) Housing GT16F-1P-HU(A) Brown PBT GT16F-1P-HU(B) Green Outer terminals 25.1 Ø BRecommended PCB pattern 14.5 Part No. HRS No. Material Plating Insulator Diameter Outer Diameter Packaging RoHS GT16C-/ PC Phosphor Ø1.5 to 2.0 Ø2.6 to 3.4 Tin plating GT16C-/ PC bronze Ø0.6 to 0.9 Ø1.4 to 1.8 Part No. HRS No. Material/Plating Color Packaging RoHS HousingPPS GT16F-1P-H(A) Inner TerminalPhosphor bronze/tin plating Brown Outer TerminalPhosphor bronze/tin plating InsulatorPPS/Natural GT16F-1P-H(B) Shield platephosphor bronze/tin plating Metal reinforcementbrass/tin plating Green (31.4) (23) (6.3) 7 (6.3) 3 GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 51
5 GT16 Series GT5 GT13 Genuine Market Parts F Connectors Housing (Retainer Stopper Specification) GT16 GT18W GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT25 GT9 GT8E Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT16C-1S-HU Light Gray GT16C-1S-HU(A) PBT Brown GT16C-1S-HU(B) Green Note : This product is used in conjunction with retainer GT16C-1P/S-R (CL ) which is a separate item. Outer terminal (Retainer Stopper Specification) Part No. HRS No. Material/Plating Insulator Diameter Outer Diameter Packaging RoHS GT16C-/ SC Phosphor bronze/ Ø1.5 to 2.0 Ø2.6 to 3.4 GT16C-/ SC Tin plating Ø0.6 to 0.9 Ø1.4 to 1.8 Retainer GT15 GT16C-1P/S-R PBT Dark Gray 52
6 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Genuine Market Parts M Connectors Housing (Retainer Stopper Specification) GT16C-1PP-HU Light Gray GT16C-1PP-HU(A) PBT Brown GT16C-1PP-HU(B) Green Note: Use this product with separate retainer part GT16C-1P/S-R(CL ). Printed Circuit Board Type (Reinforced Lock and Screw Fastening Type) Part No. HRS No. Material/Plating Color Packaging RoHS GT16C-1P-DS HousingPBT Light Gray GT16C-1P-DS(A) Inner TerminalPhosphor bronze/tin plating InsulatorPhosphor bronze/tin plating Brown GT16C-1P-DS(B) InsulatorPPS/Natural Shield platephosphor bronze/tin plating Green Note : Use mounting screws of M3 with nominal diameter 3L-6. B Recommended panel cutout dimension B Recommended PCB pattern GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 53
7 GT16 Series GT15 GT9 GT8E GT13 GT16 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT25 GT18W GT10 GT5 Panel Mounting Type Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. BRecommended panel cutout dimension Part No. HRS No. Material/Plating or Color Packaging RoHS GT16CB-1PP-HU HousingPBT/Light Gray /Tin plating Note : Use mounting screws of M3 with nominal diameter 3L-6. 54
8 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. BGT16C Wiring Method 1. Pass the cable through the outside tube. 2. Strip the cable. 3. Crimp the center terminal. 4. Insert the crimped terminal into the Insulator. 5. Insert the insulator into the outside tube. 6. Crimp the outside tube. 7. Insert outer terminal block into the housing. 8. Insert the retainer into the housing. GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 55
9 GT16 Series GT5 B F Connector Components Table B Mating Table GT13 GT16 Inner Terminal GT SCF GT16-30SCF Insulator GT16-SC Outer Terminal Housing GT16-/ SC GT16F-1S-HUA GT16-/ SC GT16F-1S-HUB GT16C-1S-HU GT16C-/ SC GT16C-1S-HUA GT16C-/ SC GT16C-1S-HUB Retainer Not Used GT16C-1P/S-R F Connectors GT16C-1S-HU M Connectors GT16CB-1PP-HU GT16C-1PP-HU GT16C-1P-DS Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G B M Connector Components Table Inner Terminal Insulator Outer Terminal Housing Retainer GT16CB-1PP-HU GT16F-1P-HUA Not Used GT PCF GT16C-/ PC GT16F-1P-HUB GT16-PC GT16-30PCF GT16C-/ PC GT16C-1PP-HU GT16C-1PP-HUA GT16C-1P/S-R GT16C-1PP-HUB Printed Circuit Board Type GT16F-1P-HA GT16F-1P-HB GT16C-1P-DS GT16C-1P-DSA GT16C-1P-DSB B Crimping tools User's manuals are available. Please ask your Hirose Electric account representative. Automatic Crimping Machine GT18W GT10 Picture reference only Part No. CM-105C * See the table below for the product number of the applicator. Hand Press Specifications Item Specification Remarks Press capacity 1.5ton Stroke Length 30mm Number of strokes 200spm50Hz 240spm60Hz Weight 75kg B Key Variation F Connectors M Connectors GT16F-1S-HUA GT16F-1P-HU(A) GT16F-1P-H(A) GT16F-1S-HUB GT16F-1P-HU(B) GT16F-1P-H(B) GT16C-1S-HUA GT16C-1P-HU(A) GT16C-1P-DS(A) GT16C-1S-HUB GT16C-1P-HU(B) GT16C-1P-DS(B) Motor 0.2kW AC100V Crimping speed 2,0004,000/H GT15 GT9 GT8E GT25 Harness Tool Terminal Product No. Terminal HRS No. Tool No. Tool HRS No. GT SCF GT PCF AP105-GT GT16-30SCF GT16-30PCF AP105-GT GT16-/ SC GT16C-/ SC GT /CK-MP GT16C-/ PC GT16-/ SC GT16C-/ SC GT /CK-MP GT16C-/ PC * Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative. * Different cables will require different crimp height settings. 56
10 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT16G Series F and M Common Parts Terminal Ferrule Part No. HRS No. Material Plating Packaging RoHS GT16G-FR Phosphor bronze Tin plating F and M Common Parts Outer Ferrule Part No. HRS No. Material Plating Packaging RoHS GT16G-1.5DHQS Phosphor bronze Tin plating F Common Parts Center Terminal Part No. HRS No. Material Plating Conductor Size Packaging RoHS GT16G-2428SCF Phosphor bronze Tin plating 24 to 28AWG 10,000 pcs/reel YES GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 57
11 GT16 Series GT5 Insulator GT15 GT13 GT16 Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16G-SC PBT Natural Note : Two of these products are used per connection. M Common Parts Center Terminal Part No. HRS No. Material Plating Conductor Size(AWG) Packaging RoHS GT16G-2428PCF Brass Tin plating 24 to 28AWG 10,000 pcs/reel YES Insulator GT18W GT25 GT8E GT9 GT16G-PC PBT Natural Note : Two of these products are used per connection. 58
12 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Outer Terminal Part No. HRS No. Material Plating Applicabie cable Packaging RoHS GT16G-/ PC Phosphor bronze Tin plating 1.5D-2W F Connector (No retainer required type) Housing GT16GM-1S-HU PBT Black Outer Terminal Part No. HRS No. Material Plating Applicabie cable Packaging RoHS GT16GM-/ SC Phosphor bronze Tin plating 1.5D-2W or equivalent GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 59
13 GT16 Series GT5 GT13 M Connector (No retainer required type) Housing GT15 GT9 GT8E GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT18W GT25 Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT16 GT16GM-1P-HU PBT Black Housing (Bracket mounting type) GT16GMN-1PP-HU PBT Black 60
14 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Board Type (Lock Pin Type) Part No. HRS No. Material/Plating or Color Packaging RoHS GT16GM-1P-H HousingPBT/Black Inner TerminalPhosphor bronze/tin plating Outer TerminalPhosphor bronze/tin plating InsulatorPBT/Natural Lock pinphosphor bronze/tin plating Board Type (SMT Type) Part No. HRS No. Material/Plating or Color Packaging RoHS GT16GMP-1P-H HousingPPS/Black Inner TerminalPhosphor bronze/tin plating Outer TerminalPhosphor bronze/tin plating Insulator L,RPPS/Natural Shield platephosphor bronze/tin plating Metal fittingsbrass/tin plating 200 pcs/reel YES B Recommended panel cutout dimension BRecommended PCB pattern * Use micro strip line and set so that dimension A has a characteristic impedance of 50ø. B Recommended panel cutout dimension BRecommended PCB pattern * Use micro strip line and set so that dimension A has a characteristic impedance of 50ø. GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 61
15 GT16 Series GT5 GT13 F Connector (Retainer required type) Housings GT16 Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16G-1S-HU Light Gray PBT GT16G-1S-HU(24) Black GT15 GT9 GT8E GT25 GT18W Note : Use this product with separate retainer part GT16C-1P/S-R (CL ). Outer Terminal Part No. HRS No. Material Plating Applicable cable Packaging RoHS GT16G-/ SC Phosphor bronze Tin plating 1.5D-2W or equivalent 62
16 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Genuine Market Parts M Connectors Board Type (Screw Fastening Type) Part No. HRS No. Material/Plating or Color Packaging RoHS GT16G-1P-H Board Type (SMT Type) HousingPBT/Light Gray Inner TerminalPhosphor bronze/tin plating Outer TerminalPhosphor bronze/tin plating InsulatorPBT/Natural Part No. HRS No. Material/Plating or Color Packaging RoHS GT16GD-1P-H HousingPPS/Black Inner TerminalPhosphor bronze/tin plating Outer TerminalPhosphor bronze/tin plating InsulatorL,RPPS/Natural Shield platephosphor bronze/tin plating Metal reinforcementbrass/tin plating 200 pcs/reel YES B Recommended panel cutout dimension BRecommended PCB pattern Note 1: Suitable mounting screws are JIS B 1122 pan head tapping screws class 2, nominal diameter 3, length 6. Note 2: Use micro strip line and set so that dimension A has a characteristic impedance of 50ø. B Recommended panel cutout dimension B Recommended PCB pattern Note : Use micro strip line and set so that dimension A has a characteristic impedance of 50ø. GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 63
17 GT16 Series GT5 Board Type (Lead Reflow Type) GT16 GT13 Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT25 GT18W GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G B Recommended panel cutout dimension MAX Part No. HRS No. Material/Plating Color Packaging RoHS GT16GL-1P-H(70) GT16GL-1P-H(71) Board Type (Lock Pin Type) HousingPPS Inner Terminal Phosphor bronze/tin plating Outer Terminal Phosphor bronze/tin plating InsulatorPBT/Natural Metal reinforcement Brass/Tin plating Light Gray Black 200 pcs/reel YES MAX Note : Use micro strip line and set so that dimension A has a characteristic impedance of 50ø. BRecommended PCB pattern B Recommended panel cutout dimension BRecommended PCB pattern GT8E GT9 GT15 Part No. HRS No. Material/Plating or Color Packaging RoHS GT16GR-1P-H HousingPBT/Black Inner TerminalPhosphor bronze/tin plating Outer TerminalPhosphor bronze/tin plating InsulatorPBT/Natural Lock pinphosphor bronze/tin plating Note : Use micro strip line and set so that dimension A has a characteristic impedance of 50ø. 64
18 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. F Connector (Waterproof type) Housing GT16GW-1S-HU PBT Black Silicon rubber White Note: Assemble main parts with separated retainer part GT5W-1P/S-R (CL ). M Connector (Waterproof type) Housing 36 GT16GW-1P-HU PBT Black Note: Assemble main parts with separate retainer part GT5W-1P/S-R (CL ) GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 65
19 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT8E GT25 GT18W GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT5 B GT16G Wiring Method Strip the cable. Note 1. See "Crimping Quality Standards Manual" for information about the end processing dimensions. Note 2. Before performing end processing, arrange cable ends to be perpendicular. (There shall be no cable crushing.) Note 3. Care must be taken so as not to damage the various cut portions of the center conductor, dielectric, and outer conductor. Conductor Dielectric Outside conductor Outer ferrule Portion of different level Slit Copper foil, aluminum foil Portion of different level Outside conductor Coaxial cable Crimp the center terminal with the special jig. Note 1. See "Crimping Conditions Table" for information about the crimp height. Note 2. See "Crimping Quality Standards Manual" for information about crimping standards. Crimped terminal Place the outside tube over the cable. Note 1. Pay attention to the placement direction of the outside tube. Outside tube Widen the external conductor with the special tool, place the outer ferrule, and return the external conductor over the outer ferrule. Note 1. Spread only the outer conductor without unravelling. Copper foil or aluminum foil shall not be spread, but shall be on the inside of the outer ferrule. Note 2. The orientation of the outer ferrule shall be as indicated in the diagram. Align the slit of the outer ferrule with the protruding portion of the crimp terminal and insert. Note 3. The outer ferrule shall be placed so that the portion of different level is inserted as far as the sheath end. Note 4. Pay attention to pinching of the external conductor (i.e., biting into the sheath) during the placement. Protruding Copper foil, aluminum foil Outside conductor Using the special jig, insert the terminal ferrule from the coupling side of the crimp terminal until it reaches the end. Note 1. Orient the terminal ferrule as illustrated in the diagram, align the slit portion of the terminal ferrule with the protruding portion of the crimp terminal, and then insert. Terminal ferrule Slit Dielectric Groove hole Protruding portion Slit Protruding Set the aforementioned terminal block onto the insulator and enclose it from the top with one more insulator. GT15 GT9 Note 1. Set the protruding portion of the crimp terminal in the groove hole of the insulator. Note 2. Pull the cable with a force on the order of 4.9 N and check that the terminal block does note come out. Insulator Use the special tool to cover the insulator with the outside tube, which was previously inserted. Note 1. Orient the outside tube as illustrated in the diagram, align the punched-in portion of the outside tube with the groove portion of the insulator (so that at both left and right, the split of the outer ferrule is aligned with the barrel bottom portion of the outside tube), and then insert. Note 2. Insert until the insulator stops at the lance of the outside tube. 66
20 GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Use the special jig to crimp the crimp terminal. Note 1. See "Crimping Conditions Table" for information about the crimping height. Note 2. See "Crimping Quality Standards Manual" for information about crimping standards. Housing Groove Homologous Inspect and complete the wiring. Insert the aforementioned outside tube block into the housing. Note 1. Align the protruding portion of the outside tube with the groove portion of the housing, and then insert. Note 2. Insert until the outside tube stops at the lance of the housing. Insert the retainer into the housing. Note 1. Insert until the retainer stops at the housing. Protruding Retainer Note : The length (L) dimension after wiring and the cut cable length are described below. Cut cable length: L1-8.1 L L1 L2 GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 67
21 GT16 Series GT5 GT13 Conversion Adapter SMA Conversion Adapter (Coupling portion: GT16G side jack - SMA side jack) Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 Note : The adapter does not have a lock portion and thus can only be used for performance measurements. Part No. HRS No. Packaging RoHS GT16GS-HRMJ SMA Conversion Adapter (Coupling portion: GT16G side plug - SMA side jack) GT18W GT25 Note : The adapter does not have a lock portion and thus can only be used for performance measurements. GT8E Part No. HRS No. Packaging RoHS GT16GP-HRMJ GT9 GT15 68
22 Powered by TCPDF ( GT16 Series Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. B F Connector Composition Table Terminal Ferrule Outer Ferrule Inner Terminal Insulator Outer Terminal Housing Retainer GT16GM-/ SC GT16GM-1S-HU GT16G-1S-HU GT16G-FR GT16G-1.5DHQS GT16G-2428SCF GT16G-SC GT16G-1S-HU24 GT16C-1P/S-R GT16G-/ SC GT16GD-1S-HU GT16GW-1S-HU GT5W-1P/S-R B M Connector Composition Table Terminal Ferrule Outer Ferrule Inner Terminal Insulator Outer Terminal Housing Retainer GT16G-FR GT16G-1.5DHQS GT16G-2428PCF Printed Circuit Board Type GT16GM-1P-H GT16GMP-1P-H GT16G-1P-H GT16GL-1P-H70 GT16GL-1P-H71 GT16GR-1P-H GT16GD-1P-H B Mating Table F Connectors M Connectors GT16GM-1P-H GT16GMP-1P-H GT16GM-1S-HU GT16GM-1P-HU GT16GMN-1PP-HU GT16G-1P-H GT16G-1S-HU GT16GL-1P-H70 GT16GB-1PP-HU GT16GL-1P-H71 GT16G-1S-HU24 GT16GR-1P-H GT16GD-1S-HU GT16GD-1P-H Applicable Connectors GT16GM-1S-HU GT16G-1S-HU GT16G-1S-HU24 GT16GD-1S-HU GT16GM-1P-HU GT16GMN-1PP-HU Process 1 Cable strip processing Schleuniger MP257, etc. (Commercial product) Schleuniger MP257, etc. (Commercial product) Process 2 Process 3 Process 4 Process 5 Center terminal crimping Cable forming Outside ferrule insertion Terminal ferrule insertion Crimping machine body type 105 AP105-GT16G-2428P Shield forming tool GT16G-1.5DHQS/CF-MD Outside ferrule insertion tool GT16G-1.5DHQS/PR-MD Terminal ferrule insertion tool GT16G-FR/PR-MD Crimping machine body type 105 AP105-GT16G-2428P Shield forming tool GT16G-1.5DHQS/CF-MD Outside ferrule insertion tool GT16G-1.5DHQS/PR-MD Terminal ferrule insertion tool GT16G-FR/PR-MD Process 6 Insulated washer assembly Manual task Manual task Process 7 Process 8 Outside tube insertion Outside tube tightening Insulated washer press tool GT16G-SC/PR-MD Hand press MOS-7 GT16G S/CK-MP Hand press MOS-7 GT16G P/CK-MP Process 9 Housing, (retainer) installation Manual task Manual task Process 10 High Frequency Characteristics (V.S.W.R.) GT16G-PC B Wiring Tools Inspection Note: Typical data using fully assemblied and connected GT16-1P-H and the GT16-1S-HU. GT16G-/ PC B Test Data (Using 1.5D-2W Type cable) GT16GM-1P-HU GT16GMN-1PP-HU GT16GW-1P-HU High frequency characteristics test (Complete) Continuity / Withstand voltage test Inspection of external appearance GT5W-1P/S-R High Frequency Characteristics (V.S.W.R.) High frequency characteristics test (Complete) Continuity / Withstand voltage test Inspection of external appearance Note: The measurement data shown above were obtained using the GT16G-1P-H and GT16G-1S-HU. GT5 GT13 GT16 PO5G GT19 GT21 GT26 GT36 GT11 GT17 GT32 GT3 GT7 GT10 GT18W GT25 GT8E GT9 GT15 69
For Antenna. In-vehicle shielding connector with twin crimp technology. GT5 Series Connectors for coaxial cables ----
Patented GT In-vehicle shielding connector with twin crimp technology GT6 GT6 GT GT2 GT In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna
GT32 Series Shielded connector for high speed transmission / USB3.0, HDMI For Network, High speed communication
Sep..208 Copyright 208 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. GT32 Series ---- Shielded connector for high speed transmission / USB3.0, HDMI.4 ---- Features Full shielded structure Suitable for
GT11 Series. Connectors for shielded cables. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 22 GT 25 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 PO5G GT 16 GT 10 GT 18W GT 9 GT 8 GT 15 GT 13 GT 5 GT11 Series Connectors for shielded cables Features A housing lance systems has been used to
Connections of the Various Units and Device Interiors. GT8 Series. High-Pressure Connectors <GT8, GT8A, GT8Z and GT8E>
GT 16 GT 13 GT 5 PO5G GT 11 GT8 Series High-Pressure Connectors GT 22 GT 25 GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 Features Crimp
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
High Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
0.6mm Pitch Stacking Height 3mm to 16mm Connectors
.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8, FX8C Series FX8 Series FX8C Series Note: that FX8 series and FX8C series are not mated with each other. Features 1. Stacking Height: 3mm to 16mm Stacking
High Current Connector
High Current Connector Series 1U Nov.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features 1. Power contact supports up to 10 mps (210/1pin Derating curve, ambient temp 2 C) with
Product Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is
Low Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
1mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF9 Series Small configuration and board space Cable 8. 7. DF9G-*P-H(54) (7.7).5.65 Plug DF9-83 / 33 / 36SCF PCB
1.25mm Pitch Super Low profile Crimping Connector
1.25mm Pitch Super Low profile Crimping Connector DF14 Series Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height
... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
2mm pitch, high reliability with lock, board to cable and cable to cable connector
NEW mm pitch, high reliability with lock, board to cable and cable to cable connector GTE Series Mechanical lock mechanism Mechanical lock Overview The GTE series comes with a mm pitch lock, for discreet
Miniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
0.4 mm Contact Pitch, 1.2 mm above the board, Flexible Printed Circuit ZIF Connectors
.4 mm Contact Pitch,. mm above the board, Flexible Printed Circuit ZIF Connectors FH 7 Series FPC thickness:.±. mm. mm Height, actuator fully closed. (54 pos. shown) Overview Continuous miniaturization
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
Features 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
Power Supply Connectors For Industrial Equipment
Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Features 1. Power supply connector for high-current Withstands voltage of 2200V C max. and 10/contact (0/
SMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
High Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions
0.5mm Pitch, 2.5mm Height, shielded FFC Connectors for High Speed Transmissions FH41 Series Supports the next generation chip V-by-One HS* by THine Features 1. Accepts impedance matched shielded FFC The
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, 1mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. 1mm contact mating pitch together
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC
Features 0.5mm Pitch, 5.8mm above the board, vertical connectors for FPC FH40 Series 1. Reduction in connection man-hours (30% reduction compared to our conventional item) Our unique actuator form enables
0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.3 mm Pitch, 1.0 mm Height FPC Connector
0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm.8mm Metal fittings do no protrude outside of the connector body Features 1. Low-profile 0.3 mm pitch FPC connector
DC to 6GHz Ultra-Small Coaxial Switch
DC to 6Hz Ultra-Small Coaxial Switch MS-147 Series Outline The ultra-small MS-147 coaxial switch series was developed for the portable terminal interface and for inspection of microwave boards (substrates)
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
Circular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
2.54mm Pitch Card Edge Connector
2.54mm Pitch Card Edge Connector CR22 Series Product Standards Rating Current rating: 3A Voltage rating: 0VAC Operating Temperature Range: - to +85ç (Note 1) Operating Humidity Range: 40 to % Storage Temperature
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector FH63 Series Single action lock (Dimension diagram : 30pos.) 2.8mm 21.94mm Features 1. Automatic single
High speed transmission, 1mm pitch Small Interface Connector
NEW High speed transmission, mm pitch Small Interface Connector DH Series Overview DH Series is an impedance controlled interface connector for high speed transmission. mm contact mating pitch together
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
I/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Amphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Features 1. Strong actuator retention Actuator will not be dislodged
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
Sealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
Connector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors
-Original Multi-purpose High-pin-count Miniature Waterproof Connectors RM-W Series ssembly type (straight plug/rm5w) 5 Ø.5 Ø.5 Mar..0 Copyright 0 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Ø Overview
Data sheet E-DAT C6 A 24 port patch panel 1RU LSA modular
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU frame made of silver anodized aluminum with 24 individually shielded RJ45 jacks
CF Card Connectors. Complies with Compact Flash Association. MI20/21 Series. Features. Applications
CF Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design Features. Compact design occupies minimum space Connectors are designed with small width and depth for miniaturization
Multi-Pole Rectangular Connectors Specifications Table
Multi-Pole Rectangular Connectors Specifications Table Multi-Pole Rectangular Connectors Specifications Table Number of Poles Rating Insulation Resistance Dielectric Strength Contact Resistance Insertion
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
Coaxial Snap-Lock Connectors
Coaxial Snap-Lock Connectors Application Specification 114-13010 11 APR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
Connector for Internal Serial Transmission FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-4 June 2013 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
Assembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
Automotive Connectors HIGH SPEED INNOVATION AUTOMOTIVE APPLICATIONS HIROSE ELECTRIC U.S.A. HIROSE ELECTRIC U.S.A.
C O N N E C T I N G T HE F U T UR E HIGH SPEED INNOVATION AUTOMOTIVE APPLICATIONS Instrument Cluster Infotainment Antenna Battery/Inverter ADAS LiDAR Lighting Infotainment & Cluster Product B r o c hur
BNC SERIES Miniature Coaxial Connectors
Miniature Coaxial Connectors Description favorite in the adaptation of a wide range of aerial rods, Jy Chyun s NC connectors feature an allencompassing antenna mount, backed by exceptional electrical characteristics,
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
J&JK SERIES SUBMINIATURE. DCONNECTOR EMI prevention shielding cover ( J cover) J COVER. Cover nut. Cover. Dimensions mm(in.) W.
ccessories DCONNECTOR EMI prevention shielding cover ( J cover) SUMINITURE J&JK SERIES J COVER J cover nut Features This shielding cover is made of mild steel, formed by our advanced stamping technology,
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
AMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors
0.3 or mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors FH30 Series Strong actuator construction Enclosed shaft of the actuator prevents it from dislocation Features
Technical attributes
Technical attributes Standards adapted to DIN VDE 0281 Conductor material Cu, bare Conductor type flexible Conductor standard IEC 60228 Conductor category 5 Core insulation Core s black, number-coded,
Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
Waterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
New Connectors For Low Profile Power Supply
NEW New Connectors For Low Profile Power Supply RP34L Series Receptacle installed height RP34L Existing RP34 (3-contact type) (2-contact type) Fig.-➀ Features 1. Low profile: These receptacles are designed
2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
HCMCONNECTOR HCM. Board-to-wire/Wire-to-wire. Features. Specifications
Board-to-wire/Wire-to-wire HCM.64 non-waterproof low profile type connector for automobile corresponding to the miniaturization of the automotive electrical equipment. Comply with the performance specification
Power Supply Connectors For Industrial Equipment
ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Mini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
UB CONNECTOR. 1Certified LR USB (Universal Serial Bus) Conforming Connector. Features. Specifications. Standards
USB (Universal Serial Bus) Conforming Connector Features Conforms to USB (Universal Serial Bus) standards This connector conforms to the USB standards, that stipulate the serial interface between PC's
PRODUCT NAME ORDER # PAGE # ANTENNAS
PRODUCT NAME ORDER # PAGE # ANTENNAS 890-960 Yagi Antenna UBR-Y9000 w/ lead 0580 450 Mhz Yagi Antenna UBR-Y4000 w/ lead 05803 806-960 & 70-990 MHz Dual Band Omni Antenna 09835 3 806-960 & 70-500 Yagi Multiband
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated