Data sheet E-DAT C6 A 24 port patch panel 1RU LSA modular

Transcription

1 Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU frame made of silver anodized aluminum with 24 individually shielded RJ45 jacks component testing for Cat.6 to ISO/IEC Ed.2.2: , DIN EN : , TIA/EIA-568-C.2 ( ) and IEC Ed.1 (12/2008), certified to GHMT compliance with class E up to 500 MHz to ISO/IEC Ed.2.2: , DIN EN : tested: component up to 600 MHz, link up to 800 MHz suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT 4 module housings, made of zinc die-casting, with six RJ45 jacks each wire pairs can be led to the LSA terminal without untwisting the pair connection of 2 to 4-pair data lines to LSA insulation displacement connectors (AWG 26/1-22/1) conductor colors marking to T568A label window for enclosed identification labels optional strain relief using cable ties modules connected by means of grounding rail incl. 30 cm grounding cable

2 Page 2/7 General Data Fields of application Design Mounting style Shielding Transmission technology Wiring Color Dimensions Dimension (L x W x H) Dimension (L x W x H) Inches Height unit Labeling option Office patch panel 1RU shielded Copper T568A metallike x x mm x x in. 19 inches 1RU label window with identification label Transmission characteristics Category (ISO) Class (ISO/IEC) Category (TIA) Remote Powering PoE PoE plus UPoE HDBaseT Transmission rate up to 10 GBit (Gigabit-Ethernet) 6 A E A 6A yes IEEE 802.3af IEEE 802.3at yes yes IEEE 802.3an Connections/interfaces Connector technology interface 1 Connector technology interface 2 Number of ports interface 2 24 Number of equipped ports interface 2 24 LSA terminal block RJ45-jack Number of positions/contacts interface 1 24 x 8 Number of positions/contacts interface 2 24 x 8P/8C

3 Page 3/7 Connections/interfaces Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG 26/1-22/1 Conductor cross section, solid wire Conductor diameter, solid wire (bare copper) Conductor diameter, solid wire (bare copper) Cable access/outlet 180 Grounding wire length Grounding wire length Shield connection mm² mm in m 0.98 ft flexible contact spring Electrical characteristics Current carrying capacity Rated voltage Contact resistance Through resistance Insulation resistance Dielectric strength conductor-conductor (secondary) max. 1 A max. 50 V max. 20 mohm max. 200 mohm min. 500 MOhm max V DC Mechanical characteristics Insertion and withdrawal force max. 20 N Life - Number of mating cycles min. 750 Position/mounting of latch - standard installation position top Materials and material properties Material - Terminal block housing Material - Jack contact Material - Jack contact finish Material - Terminal block contact Material - Terminal block contact finish Material - Front cover Material - Front cover finish PBT (polybutylene terephthalate) CuSn (tin bronze) Ni + Au (nickel-gold) CuZn (brass) Sn (tin) Al (Aluminium) silver anodized

4 Page 4/7 Environmental conditions Temperature (min. - max.) Temperature - Storage C C Temperature - Storage F F Temperature - Operating C C Temperature - Operating F F Electromagnetic measurement E 2 Certifications GHMT Component GHMT component - Validity period Approvals CE RoHS compliant compliant The product meets the following standards Generic cabling systems General requirements ISO/IEC Ed.2.2: DIN EN : TIA/EIA 568-C.2 ( ) Connectors for electronic equipment Free and fixed connectors DIN EN : Connectors for electronic equipment - Tests and measurements Test standard for connectors (plugging and removing DIN-EN : , Pg. UEL1 connectors under electrical load) Endurance tests IEC : Classifications ETIM 5.0 ETIM 6.0 EC EC001128

5 Page 5/7 Packing details Type of packaging Packaging unit - Weight (gram) Packaging unit - Weight (pound) Packaging dimension (W x H x D) Packaging dimension (W x H x D) 1 pc(s) / box g 4.82 lb x x mm x x in.

6 Accessories Page 6/7 Designation Label sheet for E-DAT C6 and E-DAT design patch panels

7 Powered by TCPDF ( Data sheet Illustrations Dimensional drawing Page 7/7