Data sheet C6 A modul 24 port 180 M 1RU stainless steel
|
|
|
- Reginald Collins
- 6 years ago
- Views:
Transcription
1 Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU stainless steel module frame with 24 individual modules C6modul 180 certified to GHMT Cat.6 re-embedded PVP component testing for Cat.6 to ISO/IEC Ed.2.2: , DIN EN : , TIA/EIA-568-C.2 ( ) and IEC Ed.1 (12/2008), certified to GHMT compliance with class E up to 500 MHz to ISO/IEC Ed.2.2: , DIN EN : tested: component up to 600 MHz, link up to 800 MHz suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC) strain relief directly snapped on to stuffer cap of C6modul optional strain relief on patch panel using cable ties grounding bolt M6 x 10 with nut and lock washer incl. 30 cm grounding cable all fully shielded modules are connected by means of the stainless steel module frame
2 Page 2/7 General Data Fields of application Design Mounting style Shielding Transmission technology Wiring Color Dimensions Dimension (L x W x H) Dimension (L x W x H) Inches Height unit Modularity Labeling option Office patch panel 1RU shielded Copper T568A, T568B stainless steel x x mm x x 1.75 in. 19 inches 1RU printed numbers Transmission characteristics Category (ISO) Class (ISO/IEC) Category (TIA) Remote Powering PoE PoE plus UPoE HDBaseT Transmission rate up to 10 GBit 6 A E A 6A IEEE 802.3af IEEE 802.3at IEEE 802.3an Connections/interfaces Connector technology interface 1 Connector technology interface 2 Number of ports interface 2 24 Number of ports interface 2 equipped 24 IDC-connection RJ45-jack Number of positions/contacts interface 1 24 x 8 Number of positions/contacts interface 2 24 x 8P/8C
3 Page 3/7 Connections/interfaces Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG 26/1-22/1 Conductor cross section, solid wire Conductor diameter, solid wire (bare copper) Conductor diameter, solid wire (bare copper) mm² mm in. Termination data, stranded wire (min. - max.) Conductor cross section, stranded wire AWG 26/7-22/7 Conductor cross section, stranded wire Conductor diameter, stranded wire (bare copper) Conductor diameter, stranded wire (bare copper) Cable access/outlet 180 Grounding wire length Grounding wire length Ground connection mm² mm in m 0.98 ft grounding bolt M6x10 with nut and lock washer Electrical characteristics Current carrying capacity Rated voltage Contact resistance Through resistance Insulation resistance Dielectric strength conductor-conductor (secondary) max. 1 A max. 50 V max. 20 mohm max. 200 mohm min. 500 MOhm max V DC Mechanical characteristics Cut-out Position/mounting of latch - standard installation position Strain relief Modul top latching clip Materials and material properties Material - Jack housing Material - Jack contact Material - Jack contact finish Material - Jack shield Material - Stuffer cap GD-Zn (zinc die-cast) Spring steel Au (gold) GD-Zn (zinc die-cast) PA 6.6 UL94 V0
4 Page 4/7 Materials and material properties Material - Strain relief Material - Module support Material - Finish PA 6.6 UL94 V0 stainless steel Ni (nickel) Environmental conditions Temperature (min. - max.) Temperature - Storage C C Temperature - Storage F F Temperature - Operating C C Temperature - Operating F F Electromagnetic measurement E 2 Certifications GHMT PVP Approvals CE RoHS compliant compliant The product meets the following standards Generic cabling systems General requirements ISO/IEC Ed.2.2: DIN EN : TIA/EIA 568-C.2 ( ) Connectors for electronic equipment Free and fixed connectors DIN EN : Connectors for electronic equipment - Tests and measurements Test schedule for connectors DIN-EN : , Pg. UEL1 Endurance tests IEC : Interference proof Immunity for industrial environments DIN EN : Climate tests IEC
5 Page 5/7 Classifications ETIM 5.0 ETIM 6.0 EC EC Packing details Type of packaging Packaging unit - Weight (gram) Packaging unit - Weight (pound) Packaging dimension (W x H x D) Packaging dimension (W x H x D) 1 pc(s) / box g 3.64 lb x x mm x x in.
6 Accessories Page 6/7 Designation Label sheet for Modul patch panels / REG I Dust protection cover for C6 A modul black I Dust protection cover for C6 A modul light gray I Dust protection cover for C6 A modul yellow I Dust protection cover for C6 A modul blue I Dust protection cover for C6 A modul green I Dust protection cover for C6 A modul red I Dust protection cover for C6 A modul pure white
7 Powered by TCPDF ( Data sheet Illustrations Dimensional drawing Page 7/7
Data sheet E-DAT modul 24x8(8) 1RU patch panel Cat.6 A, stainless steel
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU stainless steel module frame with 24 individual "E-DAT modul" modules component
Data sheet E-DAT modul 24x8(8) 1RU patch panel Cat.6A, light gray
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification 19 inch 1RU module frame with 24 individual "E-DAT modul" modules component testing
Data sheet C6 A modul 6 port 180 M GB3 pearl white
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification termination unit for mounting in service outlets for underfloor systems suitable for underfloor
Data sheet E-DAT modul Cat.6 A 8(8) jack, T568A
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular termination unit Cat.6 A, RJ45 component testing for Cat.6 A to ISO/IEC 11801
Data sheet. E-DAT modul Cat.6A 8(8) jack, T568A. Illustrations P/N I EAN Product specification. Page 1/
Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801
Data sheet. E-DAT modul Cat.6A 8(8) jack, T568A. Illustrations P/N I EAN Product specification. Page 1/
Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801
Data sheet C6 A RJ45 field plug pro
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable
Data sheet. E-DAT modul REG 1 port IP20 light gray. Illustrations P/N E EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution
Data sheet E-DAT subway 9 port GB3 pearl white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification termination unit for mounting in service outlets for underfloor systems suitable for
Data sheet E-DAT C6 A 24 port patch panel 1RU LSA modular
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU frame made of silver anodized aluminum with 24 individually shielded RJ45 jacks
Data sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC
Data sheet. E-DAT Industry RJ45 field plug PROFINET. Illustrations P/N PI EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification multi-port Cat.5 plug to be assembled in the field 100 MBit suitable according to IEEE
Data sheet E-DAT Industry terminal rail TS35 + RJ45 coupler insert Cat.6 Class E A
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels
Data sheet E-DAT modul 1 port UPk Cat.6 A, pure white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification termination unit with E-DAT modul for mounting in cable duct component testing for Cat.6
Data sheet E-DAT Industry RJ45 coupler insert Cat.6 Class E
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 class E RJ45 jack for mounting in IP67 flange housings of variants 1, 4, 5 and 14 use
Data sheet Patch cord Cat.6 A AWG m black
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification especially suitable for shielded and unshielded class E A systems fully shielded Cat.6 A patch
Data sheet Patch cord Cat.6 A AWG m gray
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification especially suitable for shielded and unshielded class E A systems fully shielded Cat.6 A patch
Data sheet E-DAT Industry patch cord V6 IP67 - RJ m
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification fully shielded Cat.6 patch cable AWG 26/7 S/FTP with PUR cable sheath 1 x RJ45 and 1 x RJ45-IP67-V6
Data sheet Connection line M12 plug straight - RJ45 plug straight 8-pole, X-coded 5.0 m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12-plug to RJ45-plug connection line Cat.6, 8-pole M12-connector, X-coded, straight
Data sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101)
Data sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101) M12
Data sheet. Connection cable M12 jack straight - free line end 8-pole, X-coded 0.5 m. Illustrations P/N 142M2X20005 EAN
Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection cable Cat.6A, x-coded, 8-pole side 1: M12-jack, straight
Data sheet. Connection line M12 4-pole D-coded 1.0 m. Illustrations P/N 142M1D11010 EAN Product specification. Page 1/
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection line Cat.5e, 4-pole, D-coded to IEC 61076-2-101 straight
Part Number: 10GX F/UTP CMR PATCH CORDS 10GX F/UTP CMR Patch Cords
Part Number: 10GX F/UTP CMR PATCH CORDS 10GX F/UTP CMR Patch Cords Product Description 10GX F/UTP CMR Patch Cords Technical Specifications Product Overview Environmental Space: Suitable Applications: Riser
Part Number: CAT6+ UTP CMR PRE-TERM 6 CAT6+ UTP CMR Pre-Term 6
Part Number: CAT6+ UTP CMR PRE-TERM 6 CAT6+ UTP CMR Pre-Term 6 Product Description CAT6+ UTP CMR Pre-Term 6 Technical Specifications Product Overview Environmental Space: Suitable Applications: Riser IBDN
Outlets terminate all shielded and shielded cable constructions AWG ( mm) size conductors.
MAX 5e Shielded Modules The shielded MAX module is the cornerstone of our category 5e screened cabling systems. This product not only meets all TIA/EIA component specifications, but also exceeds ISO/IEC
PowerCat 6 STP DataGate Plus TM
November 2004 PowerCat 6 STP DataGate Plus TM Contents: Release Announcement Data Sheets Sp. z o. o. Powązkowska 44 C Polska Tel. + 48 22 326 07 20 Fax + 48 22 326 07 30 Division Tel. 603-324-0200 Toll
Shell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
ÖLFLEX CLASSIC 110 CY
Screened PVC control cable with transparent outer sheath - PVC control cable, VDE registered, screened, flexible and numbered for various applications, U 0 /U: 300/500V Info CPR: choice under www.lappkabel.com/cpr
Directory chapter 01
Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................
06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
HARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
6000 Series Ethernet Buccaneer
Thermo-plastic version Patch Cord Flex Connector - Pur Jacket Cable PXP6037 Mates with PXP6033TP type panel mounting Overmoulded patchcords with IP rated connector Supplied with shielded RJ45 plug Single
PRODUCT INFORMATION ÖLFLEX HEAT 125 C MC. Info Improved characteristics in the event of a fire GL - Germanischer Lloyd approved
Electron beam cross-linked cables for more demanding application requirements - halogen free shielded control cable with GL certificate, special fire performance, IEC 60332-3, suitable for +125 C Info
Ethernet Buccaneer BUCCANEER DATA. bulgin
BUCCANEER FOR DATA bulgin Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains
VDE tested single cores according to EN (H05Z-K & H07Z-K) for more demanding requirements
VDE tested single cores according to EN 50525-3-41 (H05Z-K & H07Z-K) for more demanding requirements ÖLFLEX HEAT 125 C MC - halogen free single core with GL certificate, special fire performance, IEC 60332-3,
MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
D-Sub adapter Cable entry protection with metric cable entries Cable entry protection with Pg cable entries
Contents Page D-Sub adapter... 40.02 Han Split Hood... 40.04 Cable entry protection with metric cable entries... 40.06 Cable entry protection with Pg cable entries... 40.08 Coding for Hoods/Housings and
Application Specification Circular Plastic Connector (CPC) Series 45 System 05 AUG 14 Rev D
Application Specification Circular Plastic Connector (CPC) 114-13137 Series 45 System 05 AUG 14 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
FCategory 5e 110 Wiring
110 Cross Connect System FCategory 5e 110 Wiring Blocks and Accessories Category 5e 110 Field Installable Patch Cord Plugs Category 5e 110 Wiring Block Kits Category 5e 110 Patch Cords 110 Rack and Wall
Safety switches for hinges
Safety switches for hinges Selection diagram ACTUATORS L L6 L9 L16 FR FM FX FZ FK CONTACT BLOCKS 6 7 9 14 18 snap action 1NO+1N, make before break, shifted, close 21 4 66 NC 2NO+ 1NO+ CONDUIT ENTRIES Threaded
ÖLFLEX VFD 2XL - screened VFD cable for fixed installation or occasional flexing with UL TC-ER.
Multi-listed, flexible VFD cable - screened VFD cable for fixed installation or occasional flexing with UL TC-ER. Info VFD drive and motor connections Wide application range (NFPA 70/NEC)/ compliance with
Coupling ring, screw thread provides secure cable coupling. Shielded Cat 5e coupler maintains screening. Retaining Nut
Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of connectors Panel gasket maintains IP68
ÖLFLEX CLASSIC 135 CH -halogen-free control cable, HFFR, flexible and screened for various applications, U 0 /U: 300/500V
PRODUCT INFORMATION Screened halogen-free control cable with improved fire characteristics -halogen-free control cable, HFFR, flexible and screened for various applications, U 0 /U: 300/500V Info CPR:
CONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
PRODUCT INFORMATION. UNITRONIC LiYCY. Benefits Overall shield minimises electrical interference Versatile application possibilities
Shielded data cable with colour code according to DIN 47100 - shielded PVC data cable with colour code DIN 47100 for use in machinery and apparatus construction and in measurement, control and regulation
Ethernet Buccaneer IP68 BUCCANEER FOR DATA BUCCANEER DATA
IP68 Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of Panel maintains IP68 seal to panel
ÖLFLEX CLASSIC 115 CY
Screened PVC control cable with small outer diameter - PVC control cable, screened and flexible for various applications, thin and light without inner sheath, U 0 /U: 300/500V Info CPR: choice under www.lappkabel.com/cpr
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
Single foot switches PX and PA series
A Single foot switches PX and PA series Selection diagram CARRYING ROD See page /10 ADDITIONAL METAL PROTECTION OPEN PROTECTIONS CLOSED PROTECTIONS PA PA 2 CONTACT BLOCKS COMBINATIONS 01 02 1NO+1NC snap
SYSTIMAX GS3 and 1100GS6 Evolve Modular Panel Instructions
860584440 Issue 1, February 2015 SYSTIMAX 360 1100GS3 and 1100GS6 Evolve Modular Panel Instructions General The SYSTIMAX 360 1100GS3 (Cat 6) and 1100GS6 (Cat 6A) Evolve modular panels exceed ISO and TIA
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Single foot switches - PX and PA series
Single foot switches - PX and PA series Description The PX and PA foot switches are traditional products of Pizzato Elettrica that have recorded a continuous growth and success in the market. Modified
PSM PLURIMA. Functional characteristics. Brief description. RoHS 2002/95/EC. Dimensional class: medium. Standard colour: green
SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS PLURIMA Functional characteristics Dimensional class: medium Standard colour: green Heights: 35.6 mm, 25.2 mm, 14.8 mm (1.40 in,.99 in,.58 in)
Differential Pressure Sensors
1 910 1910P01 Differential Pressure Sensors for air or nonaggressive gases QBM66... Pressure-linear characteristic with selectable pressure measuring range Operating voltage AC 24 V or DC 13.5...33 V Output
ÖLFLEX CLASSIC 110 H Info Benefits
Halogen-free control cable, oil resistant and very flexible - halogen-free control cable, HFFR, oil-resistant, very flexible and cold-resistant down to -30 C for various applications, CPR Info CPR: Article
PT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2,5-TWIN/1P BU Order No.: 3209646 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,
Amphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
C003-MA-XXX-Y. Technical Data Sheet Draft CABLE ASSEMBLY ROPD FEMALE CONNECTOR. General Information
All dimensions are in mm; tolerances according to ISO 2768 c-h cable length [mm] Range length "a" 100 to 1000 1001 to 2000 2001 to 5000 > 5000 Tolerance for "a" ± 5 ± 10 ± 20 ± 1% General Information RoPD
Pre-assembled plug connectors Product range overview
Pre-assembled plug s Product range overview Function Electrical connection Type Cable Version Page/Internet Round plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7 Straight/ solder lug M12, -pin
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSM. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSM Terminal Blocks Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Height: 15.2
ÖLFLEX CLASSIC 130 H - halogen-free control cable, HFFR and flexible for various applications, U 0 /U: 300/500V
Halogen-free control cable with improved fire characteristics - halogen-free control cable, HFFR and flexible for various applications, U 0 /U: 300/500V Info CPR: choice under www.lappkabel.com/cpr For
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
9 ORDERING INFORMATION MTJ MTJ SERIES
Introduction: dam Tech MTJ series Modular Jacks are a complete line of PCB and wire leaded jacks which are UL and CS approved and meet all required FCC rules and regulations. dam Tech offers a multitude
Safety rope switches with reset for emergency stop
Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available
Safety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
PRODUCT INFORMATION. UNITRONIC SPIRAL LiF2Y11Y. Info New: the unscreened spiral cables with small cross section High restoring forces PUR outer sheath
Spiral cable with outer PUR sheath for exact impulse transmission, unshielded - PUR spiral cable, abrasion-resistant data and control cable for use in data processing, measurement and control engineering
RoHS 2002/95/EC GREEN ELECTRONICS CVF. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS CONNECTORS
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
CIF CONNECTORS. Functional Characteristics. Brief Description. RoHS 2002/95/EC. Dimensional Class: Medium. Standard Colour: Green
SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET STD PRODUCTS CONNECTORS Functional Characteristics Dimensional Class: Medium Standard Colour: Green Dimensions: 18.4 x 15.5 mm (.724 x.610 in) Max Approved Wire
PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2,5-QUATTRO/2P BU Order No.: 3209675 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,
RoHS 2002/95/EC GREEN ELECTRONICS PSQ. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS PLURIMA
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSP Terminal Blocks Functional characteristics Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 0 21.5
Datasheet. W-series terminal with clamping yoke connection WDU 4
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
SKINTOP ST-M, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms
PRODUCT INFORMATION, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms Info Now with IP69 approval! Proven to withstand the
EPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
Universal plug connectors, for self-assembly
Universal plug connectors, for self-assembly Universal plug connectors, for self-assembly Product range overview Function Version Type Connection technology Connection cross section Degree of [mm 2 ] protection
PRODUCT INFORMATION. UNITRONIC LiYCY. Benefits Overall braid minimises electrical interference Multifunctional application possibilities
Screened data transmission cable with colour code acc. to DIN 47100 : Low-frequency PVC data cable DIN 47100 coded Flexible (0.34mm² multi-wire Maxi TERMI-POINT ) Flame retardant Screened, Instrumentation
PLASTIC BOXES - WIRE DUCTS - DIN RAILS - CABLE TIES
PLASTIC BOXES - WIRE DUCTS - DIN RAILS - CABLE TIES TECNOMATIC CORP. www.tecnomatic.com PLASTIC BOXES TECHNICAL SPECIFICATIONS www.tecnomatic.com Material: ABS thermoplastic, heat resistant to 650 C, with
Datasheet. W-series terminal with clamping yoke connection WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Data sheet TERMSERIES TRZ 120VUC 1CO
relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated
Product Bulletin. Be Certain with Belden. Belden DataTwist 1200 Cables
Product Bulletin PB 294 Belden DataTwist 1200 Cables DataTwist 1200 UTP Cables are part of the industry s most powerful Category 5e networking solution: Belden IBDN System 1200. DataTwist 1200 Cables exceed
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
PATCH PANEL Easy Patch INSTRUCTION MANUAL
Page 1 BDA98-1 PATCH PANEL Easy Patch 96 Bantam (TT) Jacks IDC termination NPPA-TT-IDC Page 2 BDA98-1 Index 1. Electrical configuration...3 2. Grounding variations...4 3. Wiring...5 4. Cable retention...6
Safety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS CONTACT BLOCKS FR FX FK FW 5 6 7 11 1 14 NC NC
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
SAC-4P-M12MS/ 5,0-PUR SH
Extract from the online catalog SAC-4P-M12MS/ 5,0-PUR SH Order No.: 1682647 Sensor/Actuator cable, 4-position, PUR, halogen-free, Black-gray RAL 7021, shielded, Plug, straight M12, A-coded, on Free conductor
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
ZK2.5-D1-PE PI-Spring Terminal Blocks Double deck with 1 ground circuit
Technical Datasheet SNK6040D00 Catalogue Page SNK604S00 ZK.-D-PE PI-Spring Terminal Blocks Double deck with ground circuit Improve the safety of your installation in the event of a short-circuit thanks
RoHS 2011/65/EU GREEN ELECTRONICS MSG. Terminal Blocks ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2011/65/EU e3 GREEN ELECTRONICS Terminal Blocks ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS TERMINAL BLOCKS Functional characteristics s 270
Panduit PreConfigured ZDF48-RA Industrial Distribution Frame (IDF) Installation Instructions
Panduit PreConfigured ZDF48-RA Industrial Distribution Frame (IDF) Installation Instructions Figure 1: Industrial Distribution Frame (IDF) Equipment Elevation V00028CA Rev01 Page 1 of 14 Table of Contents
Manual Motor Starters. Meta-MEC
Manual Motor Starters Meta-MEC Manual Motor Starters LS Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 2 45 mm 70 mm 63AF 100AF 3 3 Manual LS Meta-MEC Motor Starters
EPIC. Connector Accessories CONNECTOR ACCESSORIES. Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands
CONNECTOR ACCESSORIES Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands D Series Pressure Screws 413 U Series Washers 413 Sealing Rings 413 Neoprene & Viton Concentric Sealing
Single-phase CT current transformers Cat. Nos :
Index Pages 1. Description - Use... 2 2. Range...2 3. Overall dimensions...2 4. Preparation - Connection... 3 5. General characteristics...5 6. Compliance and approvals...7 1/6 1. DESCRIPTION - USE Closed-type
Climatic proofing Damp heat, constant, to IEC Damp heat, cyclic, to IEC mm
DATASHEET - M22-L-W Delivery program Indicator light, flush, white Part no. M22-L-W Catalog No. 216771 Eaton Catalog No. M22-L-WQ EL-Nummer 4355332 (Norway) Product range RMQ-Titan Basic function Indicator
LK Position Switches TECHNICAL DATASHEET.
LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions