9 ORDERING INFORMATION MTJ MTJ SERIES
|
|
|
- Bruce Banks
- 5 years ago
- Views:
Transcription
1 Introduction: dam Tech MTJ series Modular Jacks are a complete line of PCB and wire leaded jacks which are UL and CS approved and meet all required FCC rules and regulations. dam Tech offers a multitude of sizes (4P2C thru 10P10C) with styles including single, ganged and stacked versions with options of ferrite or magnetic filtering and or metal shielding. Jacks with integral LED s and combination hybrids such as MTJ/USB jacks are also available. These jacks are available in thru-hole or SMT mounting. FETures: UL 1863 recognized versions FCC compliant to No. 47 CFR part 68 Magnetic and Ferrite filtered types 4,6,8 and 10 positions available Single, stacked or ganged Hi-Temp and LED options Unshielded or Metal Shielded Thru-Hole or SMT mounting Cat. 5 & 5e NSI/TI/EI MTING Plugs: dam Tech modular plugs and all industry standard telephone plugs. specifictions: Material: Standard Insulator: PBT, or BS, rated UL94V-0 Optional Hi-Temp Insulator: Nylon 6T rated UL94V-0 Insulator Colors: Black or medium gray Contacts: Phosphor Bronze Shield: Phosphor Bronze, Nickel plated Contact Plating: Flat contacts: Gold over Nickel underplate on contact area, Tin over Copper underplate on solder tails. Round contacts: Gold over Nickel underplate overall Electrical: Operating voltage: 150V C max. Current rating: 1.5 mps max. Contact resistance: 20 mω max. initial Insulation resistance: 500 MΩ min. Dielectric withstanding voltage: 1000V C for 1 minute Mechanical: Insertion force: 4 contacts: 17.6N 6 contacts: 20.6N 8 contacts: 22.5N 10 contacts: 24.5N Durability: 500 Cycles Temperature Rating: Operating temperature: -40 C to +85 C Soldering process temperature: Standard insulator: 235 C Hi-Temp insulator: 260C Packaging: nti-esd plastic trays Safety gency PPROVls: UL Recognized & CS Certified, File no. E ORDERING INFORMTION MTJ SERIES INDICTOR MTJ = Modular telephone jack HOUSING PLUG SIZE 4, 6, 8 or 10 NO. OF CONTCT POSITIONS FILLED 2, 4, 6, 8 or 10 BODY COLOR 1 = Black 2 = Gray PLTING X = Gold Flash over Nickel underplate Consult factory for additional plating options HOUSING TYPE 0, 1, 2, 2B, 2C, 3, 5, 7, 9,, E, F, G, H, K, M, T, V, W, W, WB, Y, Q S: dd designator(s) to end of part number S = Face shielded jack (Body type 0 only) FSX = Full metal shield (Use FS, FSB, FSD, FSE) SMT = Surface mount tails, housings 0, 5, 9, G & W with Hi-Temp insulator N = No panel stops (Types: 1, 0, 2, 3, D) K = Keyed telephone jack HT = Hi-Temp insulator for Hi-Temp soldering processes up to 260C (dd this option for thru-hole products only. ll SMT products are manufactured with Hi-Temp insulators) PG = Panel ground tabs KT = Kapton Tape pickup when applicable 9
![.622" Height, Side ENTRY - Type 1.620 [15.75].810 [20.57].090 [2.30].047 [1.20] Type 1 6P6C 6P4C L KEY.](/docs-images/89/98918332/images/2-0.jpg "622 [15.80].157 [4.00] 1 6.520 [13.21].400 [10.16].413 [10.50] MTJ-661X1 NO PNEL STOPS L 1 6 ø.035 [0.")
![90] ø.126 [3.20].400 [10.16].700 [17.78].810 [20.57].090 [2.30].047 [1.20] Type 1 8P8C L KEY.622 [15.](/docs-images/89/98918332/images/2-1.jpg "80].157 [4.00] 1 8.600 [15.24].413 [10.50] MTJ-881X1 NO PNEL STOPS L 8 1 ø ø.035 [0.90] ø.126 [3.")
2 .622" Height, Side ENTRY - Type [15.75].810 [20.57].090 [2.30].047 [1.20] Type 1 6P6C 6P4C L KEY.622 [15.80].157 [4.00] [13.21].400 [10.16].413 [10.50] MTJ-661X1 NO PNEL STOPS L 1 6 ø.035 [0.90] ø.126 [3.20].400 [10.16].700 [17.78].810 [20.57].090 [2.30].047 [1.20] Type 1 8P8C L KEY.622 [15.80].157 [4.00] [15.24].413 [10.50] MTJ-881X1 NO PNEL STOPS L 8 1 ø ø.035 [0.90] ø.126 [3.20] 10
![.498" Height, Side ENTRY - Type 0.622 [15.80].714 [18.15].090 [2.30].](/docs-images/89/98918332/images/3-1.jpg "047 [1.20] Type 0 6P6C 6P4C.498 [12.65].157 [4.00] MTJ-660X1 1 6.")
![400 [10.16].315 [8.00].525 [13.34] NO PNEL STOPS L 1 6 ø.035 [0.90] ø.](/docs-images/89/98918332/images/3-2.jpg "126 [3.20].400 [10.16] Face Shield Option.700 [17.80].714 [18.15].")
![090 [2.30].047 [1.20] Type 0 8P8C.498 [12.65] 1 8 L KEY.315 [8.00].](/docs-images/89/98918332/images/3-3.jpg "157 [4.00] MTJ-880X1.600 [15.24] NO PNEL STOPS L 8 1 ø.035 [0.90] ø.")
3 .498" Height, Side ENTRY - Type [15.80].714 [18.15].090 [2.30].047 [1.20] Type 0 6P6C 6P4C.498 [12.65].157 [4.00] MTJ-660X [10.16].315 [8.00].525 [13.34] NO PNEL STOPS L 1 6 ø.035 [0.90] ø.126 [3.20].400 [10.16] Face Shield Option.700 [17.80].714 [18.15].090 [2.30].047 [1.20] Type 0 8P8C.498 [12.65] 1 8 L KEY.315 [8.00].157 [4.00] MTJ-880X1.600 [15.24] NO PNEL STOPS L 8 1 ø.035 [0.90] ø.126 [3.20] SMT Option 11
4 internal shield Low Profile SMT- Type Y.519 [13.20].389 [9.88].710 [18.00].114 [2.90].197 [5.00] TYPE Y 6P6C 6P4C.535 [13.60].452 [11.50].527 [13.40].307 [7.80].043 [1.10] MTJ-66YX1.500 [12.70].030 [0.76] ø.055 [ø1.40].452 [11.50].281 [7.15].590 [15.00].467 [11.86].710 [18.00].114 [2.90].197 [5.00] TYPE Y.535 [13.60].452 [11.50].527 [13.40].307 [7.80].043 [1.10] MTJ-88YX1.570 [14.50].030 [0.76] ø.055 [ø1.40].527 [13.40].281 [7.15] 12
![compact & shielded jack - Type 2, 2B & 2C.560 [14.20].480 [12.20].560 [14.20].480 [12.20].090 [2.30].590 [15.00].048 [1.22] TYPE 2 Type 2 4P4C 6P6C 6P4C NO PNEL STOPS L NO PNEL STOPS L.571 [14.50].](/docs-images/89/98918332/images/5-2.jpg "409 [10.40].130 [3.30] MTJ-662X2.472 [12.00].472 [12.00].236 [6.00].091 [2.30] MTJ-442X2 TYPE 2B 4 POS.394 [10.00] TYPE 2C 4 POS.480 [12.20] Type 2B & 2C 4P4C 6P6C 6P4C.394 [10.00].472 [12.00] MTJ-442BX2 MTJ-642BX2.")
![480 [12.20].591 [15.00].591 [15.00].512 [13.00].571 [14.50].472 [12.00].590 [15.00].590 [15.00] TYPE 2B 6 POS TYPE 2C 6 POS TYPE 2B 8 POS.236 [6.00].138 [3.50].091 [2.30] MTJ-882BX1.201 [5.](/docs-images/89/98918332/images/5-4.jpg "10] 6 CIRCUIT.120 [3.06] 4 CIRCUIT.040 [1.02] ø.094 [ø 2.40].091 [2.30] Type 2.472 [12.00] ø.31 [ø.79].120 [3.06] 4 CIRCUIT.201 [5.10] 6 CIRCUIT.281 [7.14] 8 CIRCUIT ø.31.040 [1.02] [ø.79] ø.094 [ø 2.40].091 [2.30] Type 2B & 2C TYPE 2B 4P4C TYPE 2C 4P4C TYPE 2B 6P6C TYPE 2C 6P6C TYPE 2B 8P8C DIM.")
5 compact & shielded jack - Type 2, 2B & 2C.560 [14.20].480 [12.20].560 [14.20].480 [12.20].090 [2.30].590 [15.00].048 [1.22] TYPE 2 Type 2 4P4C 6P6C 6P4C NO PNEL STOPS L NO PNEL STOPS L.571 [14.50].409 [10.40].130 [3.30] MTJ-662X2.472 [12.00].472 [12.00].236 [6.00].091 [2.30] MTJ-442X2 TYPE 2B 4 POS.394 [10.00] TYPE 2C 4 POS.480 [12.20] Type 2B & 2C 4P4C 6P6C 6P4C.394 [10.00].472 [12.00] MTJ-442BX2 MTJ-642BX2.480 [12.20].591 [15.00].591 [15.00].512 [13.00].571 [14.50].472 [12.00].590 [15.00].590 [15.00] TYPE 2B 6 POS TYPE 2C 6 POS TYPE 2B 8 POS.236 [6.00].138 [3.50].091 [2.30] MTJ-882BX1.201 [5.10] 6 CIRCUIT.120 [3.06] 4 CIRCUIT.040 [1.02] ø.094 [ø 2.40].091 [2.30] Type [12.00] ø.31 [ø.79].120 [3.06] 4 CIRCUIT.201 [5.10] 6 CIRCUIT.281 [7.14] 8 CIRCUIT ø [1.02] [ø.79] ø.094 [ø 2.40].091 [2.30] Type 2B & 2C TYPE 2B 4P4C TYPE 2C 4P4C TYPE 2B 6P6C TYPE 2C 6P6C TYPE 2B 8P8C DIM. "".394 [10.00].472 [12.00].472 [12.00].591 [15.00].590 [15.00] 13
![Compact type Q & ShiElded- type 2B MTJ-662BX1-FS.506 [12.85] MTJ-882BX1-FS.614 [15.60] METL SHIELD.540 [13.71] NO SHIELD Type 2B Shielded 6P6C 6P4C.590 [15.00].128 [3.25].472 [12.](/docs-images/89/98918332/images/6-2.jpg "00] 6 POS 2B SHIELDED.590 [15.00] 8 POS 2B SHIELDED [6.30].145 [3.68] MTJ-662BX1-FS.201 [5.10] 6 CIRCUIT.281 [7.14] 8 CIRCUIT ø.31.040 [1.02] [ø.79] ø.094 [ø 2.40].091 [2.30].128 [3.")
6 Compact type Q & ShiElded- type 2B MTJ-662BX1-FS.506 [12.85] MTJ-882BX1-FS.614 [15.60] METL SHIELD.540 [13.71] NO SHIELD Type 2B Shielded 6P6C 6P4C.590 [15.00].128 [3.25].472 [12.00] 6 POS 2B SHIELDED.590 [15.00] 8 POS 2B SHIELDED [6.30].145 [3.68] MTJ-662BX1-FS.201 [5.10] 6 CIRCUIT.281 [7.14] 8 CIRCUIT ø [1.02] [ø.79] ø.094 [ø 2.40].091 [2.30].128 [3.25] TYPE 2B 6P6C TYPE 2B 8P8C DIM. "".472 [12.00].590 [15.00] MTJ-882BX1-FS.515 [13.10].472 [12.00] Type Q Compact Jack 4p4c.452 [11.50].405 [10.30].132 [3.36].118 [3.00].040 [1.02] MTJ-44QX1 ø.035 [0.90].212 [5.40].132 [3.36].405 [10.30] ø.126 [3.02] 14
7 .645" Height, Top Entry, Open body - Type 3 NO PNEL STOPS L.645 [16.38].138 [3.50].150 [3.81] Type 3 4p4c.625 [15.88].550 [13.97].256 [6.50].300 [7.62] MTJ-443X1 NO PNEL STOPS L.530 [13.46].645 [16.38].138 [3.50] Type 3 6p4c.625 [15.88].630 [16.00].256 [6.50].400 [10.16] MTJ-663X1 NO PNEL STOPS L.605 [15.36].645 [16.38].138 [3.50] Type [15.88].700 [17.84].256 [6.50] MTJ-883X1 4p4c 6p4c 6p6c ø.035 [0.91] (4x) ø.035 [0.91] (6x) ø.035 [0.91] (8x).300 [7.62].400 [10.16] ø.126 [3.20] (2x) ø.126 [3.20] (2x) ø.126 [3.20] (2x) 15
![.460" Height, Side ENTRY - Type 5.440 [11.18].708 [18.00].708 [18.00] Type 5 4p4c L KEY.460 [11.70].](/docs-images/89/98918332/images/8-1.jpg "460 [11.70].147 [3.73].147 [3.73].300 [7.62].311.311[7.90] [7.90] ø.126 [3.20] (2x).300 [7.62].150 [3.")
![81] MTJ-445X1 ø.035 [.89] (4x).150 [3.81].520.520[13.21] L KEY.708.708 [18.00] [18.00].460.460 [11.](/docs-images/89/98918332/images/8-2.jpg "70] [11.70] Type 5 6p4c 6p6c.147.147 [3.73] [3.73].400 [10.16].400 [10.16].311.311 [7.90] [7.90] ø.")
![126 [3.20] (2x).400 [10.16] MTJ-665X1 ø.035 [.89] (6x).600 [15.24].708.708 [18.00] [18.](/docs-images/89/98918332/images/8-3.jpg "00] Type 5 SMT Option L KEY.460.460 [11.70] [11.70].147.147 [3.73] [3.73].311.311 [7.90] [7.90] ø.126 [3.")
8 .460" Height, Side ENTRY - Type [11.18].708 [18.00].708 [18.00] Type 5 4p4c L KEY.460 [11.70].460 [11.70].147 [3.73].147 [3.73].300 [7.62] [7.90] [7.90] ø.126 [3.20] (2x).300 [7.62].150 [3.81] MTJ-445X1 ø.035 [.89] (4x).150 [3.81] [13.21] L KEY [18.00] [18.00] [11.70] [11.70] Type 5 6p4c 6p6c [3.73] [3.73].400 [10.16].400 [10.16] [7.90] [7.90] ø.126 [3.20] (2x).400 [10.16] MTJ-665X1 ø.035 [.89] (6x).600 [15.24] [18.00] [18.00] Type 5 SMT Option L KEY [11.70] [11.70] [3.73] [3.73] [7.90] [7.90] ø.126 [3.20] (2x) MTJ-885X1 ø.035 [.89] (6x) 16
9 Thru Hole Side Entry - Type [18.10] [12.20].480 [12.25].480 [12.25] Type 7 4p4c.732 [18.60].732 [18.60].827 [21.00].827 [21.00] [5.72].225 [5.72] [15.88] [15.88].579 [14.70].579 [14.70].128 [3.25].128 [3.25] MTJ-447X1.713 [18.10] [12.20] [12.20] [12.25] [12.25] Type 7 6p4c 6p6c.732 [18.60].732 [18.60] [21.00] [21.00].128 [3.25].128 [3.25] [15.88] [15.88].225 [5.72].225 [5.72] [14.70] [14.70] MTJ-647X1.630 [16.00] [2.03] [2.03].650 [16.51].650 [16.51] L SHORTING L BRS SHORTING BRS Type [19.18] [19.18].720 [18.29].720 [18.29].625 [15.88] [8.00] [8.00] MTJ-887X1 4p4c 6p4c 6p6c ø.035 [0.90].120 [3.06].040 [1.02] ø.035 [0.90].200 [5.08].040 [1.02].040 [1.02].281 [7.14].033 [.840] ø.091 [2.30].024 [.610].625 [15.88] ø.093 [2.36].024 [.610].625 [15.88] ø.093 [2.36] ø.035 [.90].625 [15.88] 17
10 .484" Height, Side ENTRY - Type [15.00].681 [17.30] Type 9 6p4c 6p6c.484 [12.30].138 [3.50].287 [7.30] ø.126 [3.20] (2x) FLT CONTCTS L MTJ-669X1 ø.035 [.89] (6x).590 [15.00].681 [17.30] Type [12.30].138 [3.50].287 [7.30] ø.126 [3.20] (2x) FLT CONTCTS L MTJ-889X1 ø.035 [.89] (8x).622 [15.80].732 [18.60] Type 9 Shielded SMT Option.520 [13.20].327 [8.30] ø.126 [3.20] (2x).610 [15.50] ø.063 [ø1.60] MTJ-889X1-FSE.120 [3.05] MTJ-889X1-FSE-PG Shown with optional panel ground tabs See page 20 for other Shield Pin Location Options ø.035 [.89] (8x) 18
![top entry, enclosed body - Type F.389 [9.88].247 [6.27].12.12[3.0] [3.0] Type F 6p6c.634 [16.1].634 [16.1].10 [8.9].604 [15.34].128 [3.25].128 [3.25].10 ø.126 [ø3.](/docs-images/89/98918332/images/11-1.jpg "20] 2 PLCS..45.638 [16.20].638 [16.20].136 [3.45] MTJ-66FX1.10 ø.031 [ø0.80] 6 PLCS..35.05.25.389 [9.88].247.247[6.27].12 [3.0].12 [3.0] Type F.634.634[16.1].10 [8.9].")
![604 [15.34].128.128[3.25].10 ø.126 [3.20] (2x).638 [16.20].638 [16.20].136.136 [3.45] [3.45] MTJ-88FX1 ø.031 [.80] (8x).660 [16.77].389 [9.88].120.120 [3.05].261 [6.](/docs-images/89/98918332/images/11-2.jpg "63] [8.9] Type F Shielded.652 [16.55].652 [16.55].631 [16.04].631 [16.04].126.126[3.20] MTJ-88FX1-FS ø.126 [3.20] (2x) ø.031 [.80] (8x).618 [15.69] ø.063 [1.60].120 [3.")
11 top entry, enclosed body - Type F.389 [9.88].247 [6.27].12.12[3.0] [3.0] Type F 6p6c.634 [16.1].634 [16.1].10 [8.9].604 [15.34].128 [3.25].128 [3.25].10 ø.126 [ø3.20] 2 PLCS [16.20].638 [16.20].136 [3.45] MTJ-66FX1.10 ø.031 [ø0.80] 6 PLCS [9.88] [6.27].12 [3.0].12 [3.0] Type F [16.1].10 [8.9].604 [15.34] [3.25].10 ø.126 [3.20] (2x).638 [16.20].638 [16.20] [3.45] [3.45] MTJ-88FX1 ø.031 [.80] (8x).660 [16.77].389 [9.88] [3.05].261 [6.63] [8.9] Type F Shielded.652 [16.55].652 [16.55].631 [16.04].631 [16.04] [3.20] MTJ-88FX1-FS ø.126 [3.20] (2x) ø.031 [.80] (8x).618 [15.69] ø.063 [1.60].120 [3.05] 19
![.500" height, Side ENTRY - Type G.520 [13.21].809 [20.54] Type G 6p6c.500 [12.70].400 [10.16].415 [10.55].128 [3.25] MTJ-64GX1 ø.035 [.90] ø.126 [3.20].400 [10.16].600 [15.24].809 [20.54] Type G.500 [12.70].128 [3.25].415 [10.55] MTJ-88GX1 ø.](/docs-images/89/98918332/images/12-1.jpg "035 [.90] Panel Stops ø.126 [3.20] vailable with optional panel stops dd -PS to end of part No..626 [15.9].535 [13.60].835 [21.2].835 [21.2].120 [3.05] [8.9] SHIELD PIN LOCTION FSD : =.120 [3.05] SHIELD PIN LOCTION S FS : =.")
![170 [4.32] FSB : =.144 [3.66] FSE : =.120 [3.05] Type G Shielded (FSD) ø.063 [1.60].610 [15.50] ø.035 [.90].120 [3.05] ø.035 [.90] ø.126 [3.](/docs-images/89/98918332/images/12-3.jpg "20] PCB Layout (FS, FSB, & FSE) MTJ-88GX1-FSB-PG Shown with Full Metal Shield & Panel Ground Tab options MTJ-88GX1-FSD Shown with Full Metal Shield option ø.063 [1.60].610 [15.50] ø.126 [3.20] 20")
12 .500" height, Side ENTRY - Type G.520 [13.21].809 [20.54] Type G 6p6c.500 [12.70].400 [10.16].415 [10.55].128 [3.25] MTJ-64GX1 ø.035 [.90] ø.126 [3.20].400 [10.16].600 [15.24].809 [20.54] Type G.500 [12.70].128 [3.25].415 [10.55] MTJ-88GX1 ø.035 [.90] Panel Stops ø.126 [3.20] vailable with optional panel stops dd -PS to end of part No..626 [15.9].535 [13.60].835 [21.2].835 [21.2].120 [3.05] [8.9] SHIELD PIN LOCTION FSD : =.120 [3.05] SHIELD PIN LOCTION S FS : =.170 [4.32] FSB : =.144 [3.66] FSE : =.120 [3.05] Type G Shielded (FSD) ø.063 [1.60].610 [15.50] ø.035 [.90].120 [3.05] ø.035 [.90] ø.126 [3.20] PCB Layout (FS, FSB, & FSE) MTJ-88GX1-FSB-PG Shown with Full Metal Shield & Panel Ground Tab options MTJ-88GX1-FSD Shown with Full Metal Shield option ø.063 [1.60].610 [15.50] ø.126 [3.20] 20
13 .453" Height, Side ENTRY, SMT - Type W.591 [15.0].665 [16.9] Type W SMT TBS IN.453 [11.50].004 [0.10].227 [5.77].438 [11.12].004 [0.1] MTJ-88WX1.079 [2.0].591 [15.00] [4.45].205 [5.20].665 [16.90].118 [3.0].335 [8.52].020 [0.50] [2.50] [0.64] Recommended Solder Pad Layout.591 [15.0].665 [16.9] Type WB SMT TBS OUT.453 [11.50].004 [0.10].227 [5.77].438 [11.12].004 [0.10] MTJ-88WBX1.071 [1.80].591 [15.00].175 [4.45].205 [5.20].665 [16.89].118 [3.0].335 [8.52].020 [0.50] [2.50] [0.64] Recommended Solder Pad Layout 21
14 .472" Height, Thru HolE & SMT - Type W.626 [15.90].472 [12.00].740 [18.80] SHIELDED.128 [3.25] Type W Shielded, thru Hole 10p10c.320 [8.15].120 [3.05] See page 20 for Shield Pin Location Options MTJ-88WX1-FSE MTJ-88WX1-FSE-PG Shown with optional panel ground tabs ø.126 [3.20] ø.063 [1.60].612 [15.55] ø.035 [0.90].120 [3.05].626 [15.90].472 [12.00].740 [18.80] Type W Shielded Smt with plastic Peg.321 [8.15].120 [3.05] MTJ-88WX1-FSE-SMT.120 [3.05].612 [15.55] ø.126 [3.20] ø.063 [1.60].070 [1.80] See page 20 for Shield Pin Location Options MTJ-88WX1-FSE-SMT-PG Shown with optional panel ground tabs.110 [2.79].017 [0.43] Recommended Solder Pad Layout.820 [20.90].626 [15.90].740 [18.80] Type W Shielded true Smt.472 [12.00].157 [4.00] MTJ-88WX1-FS-TSMT.724 [18.4].315 [8.00].157 [4.0] [2.5].583 [14.8].070 [1.80] See page 20 for Shield Pin Location Options MTJ-88WX1-FS-TSMT-PG Shown with optional panel ground tabs.017 [0.43].110 [2.79].05 Recommended Solder Pad Layout 22
![.504" Height, Top ENTRY, SMT - Type H.437 [11.10].504 [12.80].315 [8.00] Type H 4p4c.118 [3.00].551 [14.00].112 [2.85] MTJ-44HX1.520 [13.21].504 [12.80].315 [8.00] Type H 6p6c.118 [3.00].551 [14.00].112 [2.85 MTJ-66HX1.](/docs-images/89/98918332/images/15-0.jpg "610 [15.50].504 [12.80].315 [8.00] Type H.118 [3.00].551 [14.00].112 [2.85 MTJ-88HX1 MTJ-88HX1-FS 4p4c 6p6c.362 [9.20].362 [9.20].362 [9.20].110 [2.80].110 [2.80].110 [2.80].574 [14.60].122 [3.10].")
15 .504" Height, Top ENTRY, SMT - Type H.437 [11.10].504 [12.80].315 [8.00] Type H 4p4c.118 [3.00].551 [14.00].112 [2.85] MTJ-44HX1.520 [13.21].504 [12.80].315 [8.00] Type H 6p6c.118 [3.00].551 [14.00].112 [2.85 MTJ-66HX1.610 [15.50].504 [12.80].315 [8.00] Type H.118 [3.00].551 [14.00].112 [2.85 MTJ-88HX1 MTJ-88HX1-FS 4p4c 6p6c.362 [9.20].362 [9.20].362 [9.20].110 [2.80].110 [2.80].110 [2.80].574 [14.60].122 [3.10].574 [14.60].122 [3.10].574 [14.60].122 [3.10].133 [3.40].133 [3.40].133 [3.40].030 [0.75].150 [3.81].030 [0.75].030 [0.75] 23
![.626" Height, Top ENTRY, SMT - Type K.300 [7.62].626 [15.90].059 [1.50].138 [3.50].430 [10.92] Type K 4p4c.597 [15.18].611 [7.90].425 [10.80] [2.50] MTJ-44KX1.400 [10.16].626 [15.90].059 [1.50].138 [3.50].518 [13.](/docs-images/89/98918332/images/16-0.jpg "15] Type K 6p4c 6p6c.597 [15.18].611 [7.90].425 [10.80] [2.50] MTJ-66KX1.626 [15.90].059 [1.50].138 [3.50].598 [15.20] Type K.597 [15.18].611 [7.90].425 [10.80] [2.50] MTJ-88KX1 4p4c 6p6c.400 [10.16].")
16 .626" Height, Top ENTRY, SMT - Type K.300 [7.62].626 [15.90].059 [1.50].138 [3.50].430 [10.92] Type K 4p4c.597 [15.18].611 [7.90].425 [10.80] [2.50] MTJ-44KX1.400 [10.16].626 [15.90].059 [1.50].138 [3.50].518 [13.15] Type K 6p4c 6p6c.597 [15.18].611 [7.90].425 [10.80] [2.50] MTJ-66KX1.626 [15.90].059 [1.50].138 [3.50].598 [15.20] Type K.597 [15.18].611 [7.90].425 [10.80] [2.50] MTJ-88KX1 4p4c 6p6c.400 [10.16].386 [9.80].300 [7.62] ø.076 [1.93].386 [9.80] ø.076 [1.93].386 [9.80] ø.076 [1.93].017 [.43].197 [5.00].017 [.43].197 [5.00].017 [.43].197 [5.00] 24
17 .626" Height, Top ENTRY, SMT - Type V.568 [14.45].626 [15.90].059 [1.50].138 [3.50].452 [11.48] Type V 4p4c.590 [15.00].611 [7.90].425 [10.80] [2.50].150 [3.81] MTJ-44VX1.648 [16.46].626 [15.90].059 [1.50].138 [3.50].530 [13.48] Type V 6p6c 6p4c.590 [15.00].611 [7.90].425 [10.80] [2.50] MTJ-66VX1.728 [18.50].626 [15.90].059 [1.50].138 [3.50].618 [15.70] Type V.590 [15.00].611 [7.90].425 [10.80] [2.50] MTJ-88VX1 4p4c.531 6p6c.610 [13.50] [15.50] SQ [7.62].118 SQ [10.16].118 SQ [3.00] [3.00] [3.00].260 [6.62] ø.076 [1.93].150 [3.81].260 [6.62] ø.076 [1.93].150 [3.81].261 [6.62].700 [17.78] ø.076 [1.93].150 [3.81].017 [.43].122 [3.10].017 [.43].122 [3.10].017 [.430].122 [3.10] 25
18 .551" Height, Side ENTRY - Type E.504 [12.80].551 [14.00] Type E 4p4c.551 [14.00].118 [3.00] [2.50].118 [3.00] MTJ-44EX1.424 [10.76].402 [10.20] [2.50].335 [8.50].008 [0.20] ø.094 [2.40].008 [0.20].120 [3.06].424 [10.76].040 [1.02] ø.031 [0.80].583 [14.80].551 [14.00] Type E 6p4c 6p6c.551 [14.00].118 [3.00].504 [12.80].480 [12.20] [2.50].335 [8.50].008 [0.20].118 [3.00] ø.094 [2.40] MTJ-66EX1.201 [5.10] ø.031 [0.80] [2.50].008 [0.20].040 [1.02].504 [12.80] L KEY.732 [18.60].551 [14.00] Type E.551 [14.00].118 [3.00].654 [16.60] [2.50].335 [8.50].008 [0.20].118 [3.00] MTJ-88EX1 ø [2.40] [7.14] ø.031 [0.80].630 [16.00] [2.50].008 [0.20].040 [1.02].654 [16.60] 26
![Ct. 5, Side & Top ENTRY - Type a & T.645 [16.40].634 [16.10].653 [16.60] ø.126 [3.20] (2x) Type CT. 5, TOP Entry 8P8C.624 [15.85] ø.063 [1.60].120 [3.05].130 [3.30] MTJ-88X1-FSE ø.035 [.90] (8x).](/docs-images/89/98918332/images/19-2.jpg "500 [12.70].600 [15.24].809 [20.54] Type T CT. 5, Side Entry 8P8C.128 [3.25].413 [10.50] ø.035 [.90] ø.126 [ 3.20] MTJ-88TX1.630 [16.00].839 [21.30].839 [21.30] Type T CT. 5, Shielded 8P8C.535 [13.")
19 Ct. 5, Side & Top ENTRY - Type a & T.645 [16.40].634 [16.10].653 [16.60] ø.126 [3.20] (2x) Type CT. 5, TOP Entry 8P8C.624 [15.85] ø.063 [1.60].120 [3.05].130 [3.30] MTJ-88X1-FSE ø.035 [.90] (8x).500 [12.70].600 [15.24].809 [20.54] Type T CT. 5, Side Entry 8P8C.128 [3.25].413 [10.50] ø.035 [.90] ø.126 [ 3.20] MTJ-88TX1.630 [16.00].839 [21.30].839 [21.30] Type T CT. 5, Shielded 8P8C.535 [13.60].126 [3.20] [11.44].428 [10.87] FS, FSB & FSE.428 [10.87] B FSD =.120 [3.05] MTJ-88TX1-FSE-PG vailable with or without panel ground tabs PCB Layout (FSD) PCB Layout (FS, FSB & FSE) L PNEL GROUND TBS Dimensions & B SHIELD PIN LOCTION S FS : =.170 [4.32] FSB : =.144 [3.66] FSE : =.120 [3.05] FSD : B =.120 [3.05] ø.063 [ 1.60].610 [15.50] ø.035 [.90].120 [3.05] ø.126 [ 3.20] ø.063 [1.60].610 [15.50] ø.035 [.90] ø.126 [ 3.20] 27
![Ct. 5, 5e, Single & ganged - TYPE T.630 [16.00] 1 2 3 4 5 6 7 8.841 [21.35] Type t cat. 5e, shielded.543 [13.80].118 [3.](/docs-images/89/98918332/images/20-1.jpg "00] 2 13 5 4 6 8 7.142 [3.60].047 [1.20].425 [10.80].180 [4.57] [8.90] MTJ-88TX1-FSG-C5e 1 5 6 7 2 3 4 8 MTJ-88TX1-FSG-PG-C5e Ø.")
![035 [0.90] Ø.126 [3.20].180 [4.57].610 [15.50] Ø.063 [1.60] 1 2 3 4 5 6 7 8 2.327 [59.10].550 [13.98].841 [21.](/docs-images/89/98918332/images/20-2.jpg "35] Type T ganged cat. 5e, shielded.543 [13.80].118 [3.00] 2 13 5 4 6 8 7 2.319 [58.90] 2 [53.34].142 [3.60].047 [1.20].425 [10.")
![80].180 [4.57] [8.90] 1 5 6 7 Ø.063 [1.60] 1 5 6 7 1 5 6 7 1 5 6 7 MTJG-4-88TX1-FSG-C5e.180 [4.57] 2 3 4 8 2 3 4 8 Ø.035 [0.](/docs-images/89/98918332/images/20-3.jpg "90] 2 [53.34] 2 3 4 8 2 3 4 8.550 [13.98].402 [10.20] Ø.126 [3.20] 2.319 [58.90] Ø.063 [1.")
20 Ct. 5, 5e, Single & ganged - TYPE T.630 [16.00] [21.35] Type t cat. 5e, shielded.543 [13.80].118 [3.00] [3.60].047 [1.20].425 [10.80].180 [4.57] [8.90] MTJ-88TX1-FSG-C5e MTJ-88TX1-FSG-PG-C5e Ø.035 [0.90] Ø.126 [3.20].180 [4.57].610 [15.50] Ø.063 [1.60] [59.10].550 [13.98].841 [21.35] Type T ganged cat. 5e, shielded.543 [13.80].118 [3.00] [58.90] 2 [53.34].142 [3.60].047 [1.20].425 [10.80].180 [4.57] [8.90] Ø.063 [1.60] MTJG-4-88TX1-FSG-C5e.180 [4.57] Ø.035 [0.90] 2 [53.34] [13.98].402 [10.20] Ø.126 [3.20] [58.90] Ø.063 [1.60] Recommended RECOMMENDED PCB LYOUT Layout MTJG-4-88TX1-FSG-PG-C5e 28
![modular JCKS With Leds LED Jacks - Type, R & D.649 LED 1 [16.50] LED 2 SHIELD.531 [13.50].620 [15.75].135 [3.43].540 [13.72].360 [9.14].281 [7.14] + - + - Type R LED JCK.](/docs-images/89/98918332/images/21-0.jpg "531\" height top TB & Top LEDs, Thru Hole.040 [1.02].070 [1.78].500 [12.70].212 [5.40].135 [3.43].103 [2.62].500 [12.70].639 [16.25].360 [9.14] MTJ-88RX1-FS-LG lso available with panel ground tabs.")
21 modular JCKS With Leds LED Jacks - Type, R & D.649 LED 1 [16.50] LED 2 SHIELD.531 [13.50].620 [15.75].135 [3.43].540 [13.72].360 [9.14].281 [7.14] Type R LED JCK.531" height top TB & Top LEDs, Thru Hole.040 [1.02].070 [1.78].500 [12.70].212 [5.40].135 [3.43].103 [2.62].500 [12.70].639 [16.25].360 [9.14] MTJ-88RX1-FS-LG lso available with panel ground tabs.445 [11.30].649 [16.50].055 [1.41] SHIELD [11.20] [13.50].594 [15.10].086 [2.20].057 [1.45].552 [14.02].452 [11.48].352 [8.94] [1.78].142 [3.60] Type LED JCK BOTTOM Tab & Bottom LEDs Thru Hole LED [11.48].630 [16.00] ø.063 [1.60] LED [1.60].177 [4.50].171 [4.35].281 [7.14].031 [0.80].630 [16.00].171 [4.35] MTJ-88X1-FS-LG LED 1 LED 2 Type D top entry LED JCK.610" height with LEDs, NON-SHIELDED.720 [18.30].620 [15.75].500 [12.70].195 [4.95].085 [2.16].230 [5.84].505 [12.83].610 [15.50].135 [3.43].020 [0.51].230 [5.84] 0.40 [1.02].281 [7.14].540 [13.72].090 [2.29].500 [12.70] ø.035 [0.90] 12 PLCS ø.128 [ø3.25] MTJ-88DX1-LG dd suffix to end of P/N: LED CONFIGURTION SUFFIX LED 1 LED 2 L YELLOW YELLOW LD GREEN GREEN See pg. 43 for additional LED options Jacks with LEDs ORDERING INFORMTION MTJ R 2 LD SERIES INDICTOR MTJ = Modular telephone jack HOUSING PLUG SIZE 8 or 10 NO. OF CONTCT POSITIONS FILLED 6, 8 or 10 S: SMT = Surface mount tails with Hi-Temp insulator PG = Panel Ground Tabs LX = LEDs, use L, LD, LG, LH, LI, see LED Configuration Chart HOUSING TYPE R,, D, G PLTING X = Gold Flash 0 = 15 µin gold 1 = 30 µin gold 2 = 50 µin gold BODY COLOR 1 = Black 2 = Gray LED Configuration See Chart above Leave blank for no leds 29
![with Leds Single & Ganged LED Jacks - TYPE ar LED 1.651 [16.55] LED 2.618 [15.70] Ordering Information pg. 29 Type R With SMT 8P8C.531 [13.48].500 [12.70].516 [13.10].015 [0.38].208 [5.28].120 X.](/docs-images/89/98918332/images/22-0.jpg "024 [3.05 X 0.61] ø.127 [ø3.23] + - +.040 [1.02] -.120 [3.05].067 [1.70].740 [18.80].035 [0.90] [2.50] MTJ-88RX1-FS-SMT-PG-LG lso available without panel ground tabs.425 [10.80].236 [5.99].393 [9.98].")
![109 [2.77].236 [5.99].500 [12.70].091 [2.31].153 [3.89] [2.49] LED 1 LED 2.620 [15.75] Ordering Information pg. 34.529 [13.46].620 [15.75] Type R Ganged with Metal shield, Panel ground tabs and led option 8P8C.](/docs-images/89/98918332/images/22-1.jpg "103 [2.62].620 [15.75] C B.135 [3.43].214 [5.46].360 [9.14] D MTJG-4-88RX1-FSM-PG-LG Shown with metal shield, panel ground tabs and LED options dd suffix to end of P/N: LED CONFIGURTION 4-ø.063 [1.")
22 with Leds Single & Ganged LED Jacks - TYPE ar LED [16.55] LED [15.70] Ordering Information pg. 29 Type R With SMT 8P8C.531 [13.48].500 [12.70].516 [13.10].015 [0.38].208 [5.28].120 X.024 [3.05 X 0.61] ø.127 [ø3.23] [1.02] [3.05].067 [1.70].740 [18.80].035 [0.90] [2.50] MTJ-88RX1-FS-SMT-PG-LG lso available without panel ground tabs.425 [10.80].236 [5.99].393 [9.98].109 [2.77].236 [5.99].500 [12.70].091 [2.31].153 [3.89] [2.49] LED 1 LED [15.75] Ordering Information pg [13.46].620 [15.75] Type R Ganged with Metal shield, Panel ground tabs and led option 8P8C.103 [2.62].620 [15.75] C B.135 [3.43].214 [5.46].360 [9.14] D MTJG-4-88RX1-FSM-PG-LG Shown with metal shield, panel ground tabs and LED options dd suffix to end of P/N: LED CONFIGURTION 4-ø.063 [1.60].540 [13.72].360 [9.14].620 [15.75].040 [1.02] ø.035 [0.90].400 [10.16].360 [9.14] SUFFIX LED 1 LED 2 L YELLOW YELLOW LD GREEN GREEN See pg. 43 for additional LED options 2, 4 & 8 Ports available See pg. 43 for additional LED options =.620 [15.75] x No. of Ports [0.75] B =.620 [15.75] x No. of Ports [12.70] C =.620 [15.75] x No. of Ports - 1 D =.620 [15.75] x No. of Ports [0.50].110 [2.79].070 [1.78] C B D.135 [3.43] 3-ø.128 [3.25] ø.035 [0.90] 30
![with Leds Single & Ganged LED Jacks - TYPE g & J.622 [15.80].839 [21.30] Ordering Information pg. 29 Type G with leds.530 [13.46].610 [15.50].522 [13.26].160 [4.06].425 [10.80].130 [3.30].120 [3.](/docs-images/89/98918332/images/23-1.jpg "05] MTJ-88GX1-FSD-LH Ø.123 [3.20] Ø.062 [1.57].322 [8.18].120 [3.05] Ø.035 [.89] (8x) MTJ-88GX1-FSD-LH-PG.550 [13.97] 2.326 [59.10].840 [21.35] Type G GangeD with leds LED 2 LED 1.685 [17.40].543 [13.")
23 with Leds Single & Ganged LED Jacks - TYPE g & J.622 [15.80].839 [21.30] Ordering Information pg. 29 Type G with leds.530 [13.46].610 [15.50].522 [13.26].160 [4.06].425 [10.80].130 [3.30].120 [3.05] MTJ-88GX1-FSD-LH Ø.123 [3.20] Ø.062 [1.57].322 [8.18].120 [3.05] Ø.035 [.89] (8x) MTJ-88GX1-FSD-LH-PG.550 [13.97] [59.10].840 [21.35] Type G GangeD with leds LED 2 LED [17.40].543 [13.80].110 [2.80].133 [3.40] 2 [53.34].089 [2.28].159 [4.06].425 [10.80] [8.90] 2, 4 & 6 PORTS VILBLE MTJG-4-88GX1-FSD-PG-LG Ordering Information pg. 34 Type J Stacked with leds LED 2 LED [15.75] [28.15] PRT NUMBER PORTS DIMENSIONS B.984 [25.00] MTJG-2-88JX1-FSM-LXX MTJG-4-88JX1-FSM-LXX 2 X 1 2 X [16.51] [12.70] [32.15] [28.45] MTJG-8-88JX1-FSM-LXX 2 X [63.65] [59.95] B.215 [5.46] MTJG-12-88JX1-FSM-LXX 2 X [95.15] See pg. 43 for additional LED options [91.45] 31
24 Ferrite FILTERED & SHIELDED JCKS- Type M FILTERED MODULR JCKS Inductive filtered modular jacks improve signal integrity and are available in a variety of styles including tin plated copper shielding with a choice of magnetic transformer or ferrite filter. dam Tech offers drop in equivalents to all industry standard filtered jacks Type M EMI FERRITE FILTERED JCK Impedance (ohms) Impedance Characteristics: Frequency (Mhz) 1000 MTJ-88MX1 Non-Shielded MTJ-88MX1-FSE Metal Shielded MTJ-88MX1-FSE-PG Metal Shielded with panel ground tabs EMI FERRITE FILTERED JCK.550 [13.97].710 [18.03] FERRITE FILTER Type M 6p6c 6p4c ø.035 [.90].488 [12.40].128 [3.25] No Shield 6p4c 6p6c ø.128 [3.25].310 [7.87] ø.035 [.90] No Shield ø.128 [3.25] EMI FERRITE FILTERED & SHIELDED JCK.579 [14.70].500 [12.70].120 [3.05] FSE Shield Pin Location.736 [18.70] MTJ-88MX1-FSE FERRITE FILTER.500 [12.70].128 [3.25] FSD Shield Pin Location.736 [18.70].322 [8.17] Type M.120 [3.05] MTJ-88MX1-FSD ø.128 [3.25] ø.063 [1.60] ø.035 [.90] FSE Shield ø.035 [.90].598 [15.20].120 [3.05] ø.063 [1.60] ø.128 [3.25] FSD Shield.120 [3.05].598 [15.20] 32
25 integrated Magnetics jack integrated magnetics & LEDs 10/100 Base T & 1000 base T MtJ Series Introduction: dam Tech MTJ series RJ-45 connectors with integrated magnetics are designed to support Base 10, 100 and 1000-T applications such as hubs, routers, DSL modems, and TM transmission equipment. The integrated magnetics allows the design engineer to save PC board real-estate and lower the total part count per system. This series meets all applicable specifications for CT 5, 5e, 6 and IEEE The USB model meets all applicable USB 2.0 specifications. ll configurations are available with optional LED s. FETures: Single, stacked and ganged configurations available ll products have a full metal shield to guard against electromagnetic interference. Hi-Temp option availablell products are fully lead free and RoHS compliant MTING Plugs: dam Tech modular telephone plugs and all industry standard telephone plugs. specifictions: Material: Insulator: PBT, glass filled, rated UL94V-0 Insulator Color: Black Contacts: Phosphor Bronze or Brass Shield: Copper lloy, Nickel or Tin plated Contact Plating: Gold over Nickel underplate on contact area, Tin over Copper underplate on solder tails. Electrical: Operating Voltage: 150V C Current Rating: 1.5 mps Max. Contact Resistance: 20 mω Max. Insulation Resistance: 500 mω Min. Dielectric Withstanding Voltage: 1500V C for 1 Minute DC resistance: 1.2 Ohms Max. Interwinding capacitance: 1MHz Insertion loss: 100KHz to 80MHz = -1.1dB Min. Return loss: 1MHz to 30MHz = -18dB Min. 30MHZ to 80MHz = -12dB Min. Rise time: 30nS Max. Cross talk: 1MHz to 100MHz = 40dB TYP. Common to Common mode ttenuation: 35dB TYP. Mechanical: Insertion force: 8 Contacts: 22.5N 10 Contacts: 24.5N TEMPERTure RTING: Operation Temperature: -40 C ~ +85 C Packaging: nti-esd plastic trays or tubes Safety gency PPROVls: UL Recognized & CS Certified, File no. E Magnetics Telephone Jack ORDERING INFORMTION MTJ 8 8 C X 1 FSD LD M5 Series Indicator MTJ = Modular Telephone Jack NO. OF CONTCT POSITIONS FILLED 8 or 10 PLTING X = Gold Flash 0 = 15 µin gold 1 = 30 µin gold 2 = 50 µin gold Shield Pin Location Option FSD or FSP (See drawing on page 41) Transformer Type M1 Thru M20 (See page 44-45) Consult Factory if transformer type required is not shown HOUSING PLUG SIZE 8 or 10 HOUSING TYPE C = Tab Up, Extended Body S = Tab Up, Standard Body T = Tab Down, Short Body BODY COLOR 1 = Black LED Lx = Led Color (See Chart on page 43) RLX = Led with Resistor S: dd designator(s) to end of part number HT = Hi-Temp insulator for Hi-Temp soldering processes up to 260 C PG = Panel ground tabs 40
![integrated Magnetics jack integrated magnetics & LEDs 10/100 Base T & 1000 base T LED 1.653 [16.60] 8 1 LED 2.531 [13.50] 1.283 [32.60].137 [3.50] Type C Tab Up & Top Leds, Extended Body.280 [7.12].](/docs-images/89/98918332/images/26-0.jpg "423 [10.75].796 [20.22] MTJ-88Cx1-fsP-pg-lg-m3 ø.035 [0.89].200 [5.08].531 [13.50].423 [10.75] 1.283 [32.60].796 [20.22].137 [3.50] SHIELD PIN LOCTION DIM. FSD DIMENSION: =.120 [3.")
![05] FSP DIMENSION: =.125 [3.17] VILBLE WITH MGNETIC TRNSFORMERS: M1, M3, M4, M5, M6, M7, M8, M9, M10, M11, M12, M13, M16 & M20..696 [17.68].125 [3.18].500 [12.70].635 [16.13].080 [2.](/docs-images/89/98918332/images/26-1.jpg "03] FSP Option Shown ø.128 [3.25] ø.062 [1.57] LED 1.637 [16.20] LED 2.531 [13.50].996 [25.30] Type S Tab Up & top Leds, stndrd Body 8 1.137 [3.50].423 [10.75].996 [25.30] MTJ-88sx1-fsP-pg-lg-m7.")
![523 [13.28].323 [5.20] ø.040 [1.02].290 [7.37].290 [7.37].531 [13.50].423 [10.75].137 [3.50] SHIELD PIN LOCTION DIM. FSD DIMENSION: =.120 [3.05] FSP DIMENSION: =.125 [3.](/docs-images/89/98918332/images/26-2.jpg "17] VILBLE WITH MGNETIC TRNSFORMERS: M1, M3, M4, M5, M6, M7, M9, M10, M11, M12 & M13. See pgs. 44-45 ø.035 [0.90] ø.128 [3.25] ø.063 [1.60].610 [15.50] FSP Option Shown.626 [15.90].840 [21.35] 11 8.")
26 integrated Magnetics jack integrated magnetics & LEDs 10/100 Base T & 1000 base T LED [16.60] 8 1 LED [13.50] [32.60].137 [3.50] Type C Tab Up & Top Leds, Extended Body.280 [7.12].423 [10.75].796 [20.22] MTJ-88Cx1-fsP-pg-lg-m3 ø.035 [0.89].200 [5.08].531 [13.50].423 [10.75] [32.60].796 [20.22].137 [3.50] SHIELD PIN LOCTION DIM. FSD DIMENSION: =.120 [3.05] FSP DIMENSION: =.125 [3.17] VILBLE WITH MGNETIC TRNSFORMERS: M1, M3, M4, M5, M6, M7, M8, M9, M10, M11, M12, M13, M16 & M [17.68].125 [3.18].500 [12.70].635 [16.13].080 [2.03] FSP Option Shown ø.128 [3.25] ø.062 [1.57] LED [16.20] LED [13.50].996 [25.30] Type S Tab Up & top Leds, stndrd Body [3.50].423 [10.75].996 [25.30] MTJ-88sx1-fsP-pg-lg-m7.523 [13.28].323 [5.20] ø.040 [1.02].290 [7.37].290 [7.37].531 [13.50].423 [10.75].137 [3.50] SHIELD PIN LOCTION DIM. FSD DIMENSION: =.120 [3.05] FSP DIMENSION: =.125 [3.17] VILBLE WITH MGNETIC TRNSFORMERS: M1, M3, M4, M5, M6, M7, M9, M10, M11, M12 & M13. See pgs ø.035 [0.90] ø.128 [3.25] ø.063 [1.60].610 [15.50] FSP Option Shown.626 [15.90].840 [21.35] [13.50] Type T Tab Down & Bottom Leds, Short Body LED 1 LED [10.75].531 [13.50].423 [10.75].840 [21.35].137 [3.50].137 [3.50] MTJ-88tx1-fsP-pg-lg-m5 Tab Up Type also available SHIELD PIN LOCTION DIM. FSD DIMENSION: =.120 [3.05] FSP DIMENSION: =.125 [3.17] VILBLE WITH MGNETIC TRNSFORMERS: M1, M3, M4, M5, M6, M7, M9, M10, M11, M12 & M13. See pgs ø.035 [0.90] ø.128 [3.25] ø.063 [1.60].323 [5.20].523 [13.28].610 [15.50].159 [4.06] ø.040 [1.02] FSP Option Shown 41
27 integrated Magnetics jack with integrated magnetics & LEDs 10/100 Base T & 1000 base T.550 [13.97] Ordering Information pg [21.35] TYPE T Tab Down, SHORT Body Magnetics & LEDs 2, 4 & 5 PORTS GNGED LED 1 LED 2 B.144 [3.68].423 [10.75] D.531 [13.50].137 [3.5] "D" DIM. FS =.170 [4.32] FSB =.144 [3.65] FSG =.180 [4.57] FSE =.120 [3.05] B.550 [13.97] ø ø 1.10 [27.94] MTJG-4-88Tx1-fsb-pg Drawing shown with metal shield, panel ground tabs, LEDs and magnetics option ø.040 [1.02].159 [4.06] 2.54].145 [3.68] =.550 [13.97] X (NO OF PORTS -1) [17.27] B =.550 [13.97] X (NO OF PORTS -1) + VILBLE WITH MGNETIC TRNSFORMERS: M1, M3, M4, M5, M6, M7, M9, M10, M11, M12 & M13. See pgs ø.509 [12.93] C LED 1 LED [13.97] [28.14] PORTS DIMENSIONS TYPE J STCKED B LED 1 LED 2 B.996 [25.30].179 [4.57].509 [12.95].610 [15.49].140 [3.56] 2 X 1 2 X 2 2 X 4 2 X 5 2 X 6 2 X [17.20] [31.17] [25.40] [59.22] [53.34] [73.07] [87.04] [67.31] [81.28] [115.00] [109.22].110 [2.79].08 [2.03].400 [10.16].550 [13.97] TYP. TYP. ø.035 [.89] (64x).110 [2.79].160 [4.08] MTJG-8-88JX1-FSE-LD-M1 Drawing shown with metal shield, panel ground tabs & LEDs..610 [15.49] ø.063 [1.6] (6x) ø.126 [3.26] (2x).230 [5.84] VILBLE WITH MGNETIC TRNSFORMERS: M1, M3, M4, M5, M6, M7, M9, M10, M11, M12 & M13. See pgs [4.57].110 [2.79] B 42
MODULAR TELEPHONE JACKS
dam Technologies, Inc. MODULR TELEPHONE JKS INTRODUTION: dam Tech MTJ series Modular Telephone Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules
9 ORDERING INFORMATION MTJ MTJ SERIES
MODULR JKS Introduction: dam Tech MTJ series Modular Jacks are a complete line of P and wire leaded jacks which are UL and S approved and meet all required F rules and regulations. dam Tech offers a multitude
AC INLETS & OUTLETS IEC 320 & MINI IEC CONNECTORS IEC SERIES
C INLETS & OUTLETS IEC 30 & MINI IEC CONNECTORS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
Adam Technologies, Inc.
iec 320 & mini iec CoNNeCTorS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE and other applicable
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
.050" IDC CONNECTORS DUAL ROW SOCKET / PADDLEBOARD PLUG HFCS & HFDP SERIES ADAM TECHNOLOGIES ORDERING INFORMATION HFCS 50 SG. RoHS
DM TECHNOLOGIES.050" IDC CONNECTORS DUL ROW SOCKET / PDDLEORD PLUG HFCS & SERIES INTRODUCTION: dam Tech HFCS Series.050 IDC Sockets are low profile, precision designed flat cable sockets that feature either.050
Adam Technologies, Inc.
INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
PROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
Customer P/N: UDE P/N: GD4-QU Description:
To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Down Through Hole 10G Base-T Contact Area : 30μ" Min.Gold LED: without LED 100% RoHS without exemption Spec No. GD416005-00 Update Date 2016/11/28 Revision
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
Fuse Blocks and Clips
PGE Fuse and lock s OMNI-LOK Fuse lock...................................................................................... 484-486 Midget Fuse....................................................................................................
SPECIFICATION FOR APPROVAL
Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xulong CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY REJECTED ISSUED BY CHECKED BY APPROVED
Sealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
Card Edge Connectors Catalog Issued 7-03
Catalog 1654080 Issued 7-03 Introduction This catalog contains product descriptions of MP Card Edge Connectors. These connectors are presented in three groups: Solder Type Board-to- Board, Press-fit Board-to-
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
T Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
Card Edge GENERAL SPECIFICATIONS
Card Edge GENER SPECIFICTIONS INT MTERIS Plating U/CU File Number: CGE COE: 54453 ECCN: ER99 INTERNTION HRMONIZE COE: MECHNIC : : EECTRIC Operating WV: Current Rating: : ENVIRONMENT Operating Temperature:
C&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
RV8-ZZ MECHANICAL DIMENSION. 1.1 Product Dimension Unit:mm. Spec No. : RV ± 0.38 ± 0.20 X.X : X.XX : General Tolerance : - 1 -
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Vertical 10G Base-T Contact Area : 30μ" min. Gold LED:L-Green/Orange;R-Green/Orange Spec No. RV816009-00 Update Date 2016/4/20 Revision B Approved Checked
F Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
Data sheet E-DAT modul 24x8(8) 1RU patch panel Cat.6 A, stainless steel
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU stainless steel module frame with 24 individual "E-DAT modul" modules component
Card Edge GENERAL SPECIFICATIONS
Card Edge GENERL SPECIFICTIONS INT MTERILS Plating UL/CUL File Number: CGE COE: 54453 ECCN: ER99 INTERNTIONL HRMONIZE COE: MECHNICL : : ELECTRICL Operating WV: Current Rating: : ENVIRONMENTL Operating
C&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
Data sheet E-DAT modul 24x8(8) 1RU patch panel Cat.6A, light gray
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification 19 inch 1RU module frame with 24 individual "E-DAT modul" modules component testing
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. 1x1 Tab-DOWN RJ Description: /0 Base-TX RJ 1x1 Tab-DOWN with LEDs -pin (J0
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
Pushbutton Product Selection Guide
Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws
Data sheet C6 A modul 24 port 180 M 1RU stainless steel
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU stainless steel module frame with 24 individual modules C6modul 180 certified to
E-Mark s business philosophy centers upon providing. each of its customers with maximum value. operates out of its facility in Shelton, Connecticut.
Company Profile E-Mark s business philosophy centers upon providing each of its customers with maximum value. This includes product quality appropriate for the application, accurate delivery & competitive
AZ8521. ZETTLER electronics GmbH DPDT SUBMINIATURE SIGNAL RELAY
Z8521 DPDT SUMINITURE SIGNL RELY FETURES SMT and THT mounting available High dielectric and surge voltage: 2.5 kv surge (per ellcore T-NWT-001089) 1.5 kv surge (per FCC Part 68) 1,000 Vrms, open contacts
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
C&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
KSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
Data sheet E-DAT modul Cat.6 A 8(8) jack, T568A
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular termination unit Cat.6 A, RJ45 component testing for Cat.6 A to ISO/IEC 11801
Data sheet. E-DAT modul Cat.6A 8(8) jack, T568A. Illustrations P/N I EAN Product specification. Page 1/
Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801
EURO BLOCKS EB SERIES
INTODUTION: dam Tech EB Series Euro Blocks are a broad range PB mounted blocks in various sizes and priles with pitches ranging from 15.00mm down to 3.50mm. Included are types that have wire entry from
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN
SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings
Data sheet. E-DAT modul Cat.6A 8(8) jack, T568A. Illustrations P/N I EAN Product specification. Page 1/
Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
Starters. Across the line. Across the line starters Open & enclosed A9 AF750. Description A9 AF750. Starters. Enclosure types
Across the line starters & enclosed A9 AF750 Across the line Description A9 AF750 Maximum UL horsepower ratings UL508A Panel Program, #E105450 NEMA s (00 7) available Compact space-saving design Standard
PHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
CONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
Distinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
Data sheet E-DAT subway 9 port GB3 pearl white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification termination unit for mounting in service outlets for underfloor systems suitable for
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
ORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
Data sheet E-DAT C6 A 24 port patch panel 1RU LSA modular
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification 19 inch 1RU frame made of silver anodized aluminum with 24 individually shielded RJ45 jacks
Dielectric withstanding voltage Contact resistance
Modular Connectors MOD series Modular Connectors Outline MOD series connectors comply with FCC and NTT standards, allowing them to be used for international products. Features Because these connectors
FRNR A 250V TD Class RK5 Dual Elem Fuse-Fusetron
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FRNR225 225A 250V TD Class RK5 Dual Elem Fuse-Fusetron Number Manufacturer Description Weight per unit Product Category
*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04
FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
M40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
MTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
RA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT
EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.
.138 (3.50).024 (0.60) .370 (9.40) .185 (4.70) TYP. EPOXY SEAL.030 (0.80) .083 (2.11).740 (18.7) TYP. Standard Paddle Color - (Black) EPOXY SEAL
The Gemini Series "" Series Paddles Refer to Pages -7 For dditional Options MTRIL SPCIFICTIONS: Contacts/Terminals... Gold/gold flash Silver/tin lead Case Material... Thermoset 9V-0 ctuator Material...
Gecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
EH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
D-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
Outlets terminate all shielded and shielded cable constructions AWG ( mm) size conductors.
MAX 5e Shielded Modules The shielded MAX module is the cornerstone of our category 5e screened cabling systems. This product not only meets all TIA/EIA component specifications, but also exceeds ISO/IEC
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
Part Number: 10GX F/UTP CMR PATCH CORDS 10GX F/UTP CMR Patch Cords
Part Number: 10GX F/UTP CMR PATCH CORDS 10GX F/UTP CMR Patch Cords Product Description 10GX F/UTP CMR Patch Cords Technical Specifications Product Overview Environmental Space: Suitable Applications: Riser
Product Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version
Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and
DATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
RJ45 SINGLE PORT 100/1000/2.5G/5G BASE-T MAGNETICS
SERIES DESCRIPTION The series of RJ45 jacks with internal magnetics supports a wide range of configurations in 10/100Base-T, 1000Base-T, 2.5GBase-T and 5GBase-T applications. This series offers the ability
C&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
PTS645 Series 6 mm Tact Switches
PTS5 Series mm Tact Switches Features/enefits Compact size x mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
MTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Switches Features/Benefits Up to 10 poles per module Various contact terminals