C&K E Series Sealed Miniature Toggle Switches
|
|
|
- Whitney Bell
- 5 years ago
- Views:
Transcription
1 Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications Instrumentation Medical equipment Build--Switch Our easy Build--Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. Switches with standard options are shown on pages -20 thru -22. vailable options are shown and described on pages -22 thru -30. For additional options not shown in catalog, consult our Customer Service Center. ll models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Typical Example: E S D 1 C B E Switch Function E101 E103 E201 E203 E211 E301 E105 E107 E108 E205 E207 E208 E213 E215 E303 E305 E307 E308 ctuator M S L3 Bushing D1 F1 D9 Y Terminations V2 Contact Material C B V3 K Z Q 3 M V3 G W L W1 W3 Seal E W4 W5 R R2 V2 V4 V6 V7 V8 V9 V21 V31 V41 V61 V71 V81 V91 W W1 W3 W4 W5 Z3 Plastic ctuator Color
2 Specifications CTCT RTING: B contact material: 0.4 V 20 V C or DC max. See page -30 for additional ratings. ELECTRICL LIFE: E1XX and E2XX models: 40,000 make-and-break cycles at full load. E3XX models: 30,000 cycles. CTCT RESISTNCE: Below 10 milliohms typ. 2-4 V DC, 100 m, for both silver and gold plated contacts. INSULTI RESISTNCE: 10 9 ohms min. ELECTROSTTIC DISCHRGE (ESD) OPTI: F1 conductive bushing only. Dissipates up to 20,000 V DC from actuator to ground. DIELECTRIC STRENGTH: 1000 V RMS sea level. OPERTING TEMPERTURE: 30 C to 85 C. SOLDERBILITY: Per MIL-STD-202F method 208D, or EI RS-186E method 9 (1 hour steam aging). DEGREE OF PROTECTI: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. Materials CSE & BUSHING: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0). F1 conductive bushing option is impregnated with carbon fibers. CTUTOR: Brass, chrome plated with internal o-ring seal standard. SWITCH SUPPORT: Brass or steel, tin plated. SWITCH SUPPORT RETINER: Stainless steel. CTCTS & TERMINLS: B contact material: Copper alloy, with gold plate over nickel plate. See page -30 for additional contact materials. TERMINL SEL: Epoxy. HRDWRE: Nut & Locking ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. SWITCHES WITH STNDRD OPTIS PRT NUMBER E101SD1CBE E103SD1CBE E105SD1CBE NE E101SD1CBE = Momentary NOTE: For PC mounting information, see page -24. PRT NUMBER E201SD1CBE E203SD1CBE E205SD1CBE NE E201SD1CBE = Momentary NOTE: For PC mounting information, see page -24. PRT NUMBER E301SD1CBE E303SD1CBE E305SD1CBE NE E301SD1CBE = Momentary NOTE: For PC mounting information, see page
3 SWITCHES WITH STNDRD OPTIS C&K E Series PRT NUMBER E101MD1V3BE E103MD1V3BE E105MD1V3BE NE.460 (11,68) = Momentary NOTE: For PC mounting information, see page -29. E101MD1V3BE PRT NUMBER E201MD1V3BE E203MD1V3BE E205MD1V3BE NE.460 (11,68) = Momentary NOTE: For PC mounting information, see page -29. E201MD1V3BE PRT NUMBER E101MD1BE E103MD1BE E105MD1BE = Momentary NE NOTE: For PC mounting information, see page -24. SECTI - E101MD1BE Horizontal ctuation PRT NUMBER E201MD1BE E203MD1BE E205MD1BE = Momentary NE NOTE: For PC mounting information, see page -25. SECTI - E201MD1BE Horizontal ctuation -21
4 SWITCHES WITH STNDRD OPTIS E101MD1V2BE Vertical ctuation SECTI - PRT NUMBER E101MD1V2BE E103MD1V2BE E105MD1V2BE = Momentary NOTE: For PC mounting information, see page -26. NE PRT NUMBER E201MD1V2BE E203MD1V2BE E205MD1V2BE NE E201MD1V2BE Vertical ctuation SECTI - = Momentary NOTE: For PC mounting information, see page -26. SWITCH FUNCTI SWITCH FUNCTI CNECTED TERMINLS MODEL SCHEMTIC E101 (STD.) NE E103 (STD.) SP E OPEN 2-1 E107 E108 NE E201 (STD.) NE E203 (STD.) E ,5-6 OPEN 2-1,5-4 DP E207 E208 NE E211 (STD.) ** E213 ** 2-3, , ,5-4 E215 ** = Momentary ** Wiring for 3-way switch, see page L-29. ll models with all options when ordered with G, L, M or Q contact material
5 SWITCH FUNCTI SWITCH FUNCTI CNECTED TERMINLS MODEL E301 (STD.) NE E303 SCHEMTIC 3P E ,5-6,8-9 OPEN 2-1,5-4,8-7 E307 E308 NE = Momentary ** Wiring for 3-way switch, see page L-29. ll models with all options when ordered with G, L, M or Q contact material. CTUTOR CTUTOR CTUTOR COLOR M (STD.).300 HIGH S (STD.).500 HIGH L3 PLSTIC,.940 HIGH OPTI L3 CTUTOR COLOR * * Gloss plastic * 2 (STD.) BLCK 1 WHITE 3 RED Chrome finish Other colors available, consult Customer Service Center. No color choice required for S & M actuators. Standard when ordered with, 3, V2, V3, W-W5, R, R2, V2-V91 terminations. Finish: Chrome. Standard when ordered with C, Z, Z3, W-W5 terminations. Finish: Chrome * ctuators shown with standard D1 bushing. Subtract.030 (0,76) for D9 bushing. Subtract.100 (2,54) for Y bushing. BUSHING D1 (STD.).250 HIGH, UNTHREDED F1 (STD.) ESD CDUCTIVE BUSHING,.250 HIGH, UNTHREDED D9.280 HIGH, UNTHREDED Y THREDED, INSULTED,.350 HIGH WITH KEYWY 1/4-40 UNS-2 PNEL MOUNTING ESD protection depends on proper grounding of switch support bracket. F1 conductive bushing option is impregnated with carbon fibers; dissipates electrostatic discharge (ESD) up to 20,000 V from actuator to ground. vailable with M & S actuator options and, 3, W-W5, V2, V3, R, R2, V2-V91 termination options. E3XX models not available with D9 bushing. NOTE: Internal o-ring actuator seal standard for all bushing options. vailable only with C, Z, Z3, W-W5 terminations. Hardware: One dress nut part number , one hex nut part number and lockwasher part number supplied standard
6 TERMINTIS Z (STD.) SOLDER LUG C (STD.) PC THRU-HOLE thru Not available with F1 conductive bushing or K, L or M contact material. thru Not available with F1 conductive bushing. Z3 QUICK CNECT W, W1, W3, W4, W5 WIRE WRP OPTI DIM Dim W.750 (19,05) W1.964 (24,49) W3.425 (10,80) W (26,97) W (33,15) thru Not available with F1 conductive bushing or K, L or M contact material. Mating quick connector available, see section L, part number thru Not available with F1 conductive bushing. (STD.) RIGHT NGLE, PC THRU-HOLE E101MD1BE Horizontal ctuation SECTI - Terminal Nos. For Reference Only 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE W, W1, W3, W4 RIGHT NGLE, EXTENDED, PC THRU-HOLE OPTI DIM Dim W.50 (12,7) W1.72 (18,3) W3.20 (5,1) W4.83 (21,1) Terminal bend radii and lead-in manufacturing option
7 TERMINTIS (STD.) RIGHT NGLE, PC THRU-HOLE SECTI - Terminal Nos. For Reference Only E201MD1BE Horizontal ctuation 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE W, W1, W4 RIGHT NGLE, EXTENDED OPTI DIM Dim W.21 (5,3) W1.42 (10,7) W4.52 (13,2).33 (8,4) Terminal bend radii and lead-in manufacturing option. (STD.) RIGHT NGLE, PC THRU-HOLE W4 RIGHT NGLE, EXTENDED, PC THRU-HOLE SECTI - Terminal Nos. For Reference Only E301MD1BE Horizontal ctuation.18 (4,6).33 TYP. (8,4) Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option
8 TERMINTIS V2 (STD.) VERTICL RIGHT NGLE, PC THRU-HOLE,.150 PITCH E101MD1V2BE Vertical ctuation SECTI - V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150 PITCH Terminal bend radii and lead-in manufacturing option. V2 (STD.) VERTICL RIGHT NGLE, PC THRU-HOLE,.150 PITCH E201MD1V2BE Vertical ctuation SECTI - V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150 PITCH Terminal bend radii and lead-in manufacturing option
9 V2 (STD.) VERTICL RIGHT NGLE, PC THRU-HOLE,.150 PITCH TERMINTIS SECTI - E301MD1V2BE Vertical ctuation V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150 PITCH Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. R RIGHT NGLE WITH PCB Terminal Nos. For Reference Only E101MD1RBE Horizontal ctuation Contact makes on same side actuator thrown. vailable with B contact material only. R2 RIGHT NGLE WITH PCB Terminal Nos. For Reference Only E101MD1R2BE Horizontal ctuation Contact makes on opposite side actuator thrown. vailable with B contact material only
10 TERMINTIS V2, V6, V7, V8 VERTICL MOUNT, V-BRCKET V21, V61, V71, V81 VERTICL MOUNT, V-BRCKET, SNP-IN E101MD1 BE SNP-IN OPTI DIM V2, V (14,10) V6, V (11, 68) V7, V (16, 00) V8, V (24, 21) V2, V6, V7, V8 VERTICL MOUNT, V-BRCKET V21, V61, V71, V81 VERTICL MOUNT, V-BRCKET, SNP-IN SNP-IN OPTI DIM E201MD1 BE V2, V (14,10) V6, V (11, 68) V7, V (16, 00) V8, V (24, 21) V2, V7, V8 VERTICL MOUNT, V-BRCKET V21, V71, V81 VERTICL MOUNT, V-BRCKET, SNP-IN SNP-IN OPTI DIM E301MD1 BE V2, V (14,10) V7, V (16, 00) V8, V (24, 21) Not available with D9 & Y bushings
11 TERMINTIS V3 (STD.), V4, V9 VERTICL MOUNT, V-BRCKET V31, V41, V91 VERTICL MOUNT, V-BRCKET, SNP-IN E101MD1 BE SNP-IN OPTI DIM V3, V (11,68) V4, V (16,00) V9, V (29,21) V3 (STD.), V4, V9 VERTICL MOUNT, V-BRCKET V31, V41, V91 VERTICL MOUNT, V-BRCKET, SNP-IN E201MD1 BE SNP-IN OPTI DIM V3, V (11,68) V4, V (16,00) V9, V (29,21) V4, V9 VERTICL MOUNT, V-BRCKET V41, V91 VERTICL MOUNT, V-BRCKET, SNP-IN SNP-IN E301MD1 BE OPTI DIM Not available with D9 & Y bushings. V4, V (16,00) V9, V (29,21) -29
12 CTCT MTERIL OPTI CTCT MTERIL TERMINL PLTING RTINGS B (STD.) K GOLD 1 GOLD 1 LOW LEVEL/DRY CIRCUIT 0.4 V 20 V C OR DC MX. TIN-LED 6 Q SILVER 5 E1XX & E2XX MODELS: V C OR 28 V DC; SILVER M 4,5 POWER V C. TIN-LED 6 E3XX MODELS: V C OR 28 V DC; V C. G GOLD 3 E1XX ND E2XX MODELS: 0.4 V 20 V C OR DC MX. OR 75MPS@125VCOR28VDC; 3MPS@250VC GOLD OVER SILVER L 2,3 LOW LEVEL/DRY CIRCUIT OR POWER 7.5 C 28 V C. TIN-LED 6 E3XX MODELS: 0.4 V 20 V C OR DC MX. OR V C OR 28 V DC; V C. CTCT MTERIL/PPLICTI RECOMMENDTIS SEE CHRT, PGE L CTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. 2 END CTCTS: Coin silver, with gold plate over nickel plate. 3 CENTER CTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CTCTS: Coin silver, silver plated. ll models with all options when ordered with G, L, M or Q contact material. B contact material standard with all terminations. B contact material must be ordered with R & R2 terminations. K, L & M contact materials not available with Z & Z3 terminations. 5 CENTER CTCT & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with tin-lead alloy over nickel plate. SEL E (STD.) EPOXY SEL -30
C&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
C&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
T Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
Pushbutton Product Selection Guide
Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
C&K EP Series Sealed Tiny Pushbutton Switches
Models Available Features/enefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available Typical Applications
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
T80-T Miniature Toggle Switches Compliant
T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
C&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
ET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
C&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
T80-R Miniature Rocker and Paddle Switches Compliant
T80-R Miniature Rocker and Paddle Switches Compliant TCT DIP PUSH BUTT SLIDE ECIFICTIS MTERILS CTCT RTING: @ VC or 8 VDC ( Q terminal) CSE - diallyl phthalate ( ) ELECTRICL LIFE: 0,000 make-and-break cycles
C&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
C&K LM Series Subminiature Precision Snap-acting Switches
Models vailable Features/enefits Sealed actuator and case meets IP65 degree of protection Compact size ideal when space is limited Long life 100,000 cycles typical Reliable snap-acting mechanism Typical
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available poxy terminal seal compatible with bottom-wash cleaning Typical Applications Test & measurement equipment
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
T101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.
T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you
F Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Switches Features/Benefits Up to 10 poles per module Various contact terminals
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
SERIES 34A Miniature Toggle Switches
DIP Switches Toggle Switches Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
C&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
C&K NE-18 Series Mains / Power Switches
C&K NE-18 Series Features/Benefits Chassis or panel mount Various buttons and illumination Various contact configurations Typical pplications Mains/power switching Consumer electronics udio equipment Digital
.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches
Distinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
C&K GT Series Sealed Ultraminiature Toggle Switches
C&K T Series Sealed Ultraminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
General Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
Series 47B: Sealed Miniature Rocker and Paddle Switches
Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP
Snap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
RTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
C&K S Series Slide Switches
Switches Features/Benefits 6 to 15 S nclosed housing PC and Snap-in panel mounting Reversing option Models Available Typical Applications Portable tools Small appliances Floor care products Build-A-Switch
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
General Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
Sealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
TYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
DM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
D Series Miniature Snap-in Power Rocker Switches
Miniature Snap-in Power Switches Features/Benefits Momentary and maintained models PC and quick connect terminals Recessed bracket available prevents accidental actuation RoS compliant Typical Applications
RTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
General Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
2M Series Sub-Miniature Toggle Switches
M Series Sub-Miniature Toggle Switches SPECIFICATIS CTACT RATING: Dependent upon contact material See Page 8. MECHANICAL LIFE: 0,000 make-and-break cycles. CTACT RESISTANCE: 0 m max. initial @ -VDC 00mA
PROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES
000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE FETURES Designed for high reliability environments. Double shell case for high mechanical strength & high electrical
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES
FEATURES Dry circuit through power ratings. ompact size SPST momentary and alternate action models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPEIFIATIONS
600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN
SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings
TYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability