ANT. Materials. Features. Miniature Toggle
|
|
- Ambrose Bond
- 5 years ago
- Views:
Transcription
1 Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 0VAC, 8VDC 50VAC See Contact Options 50,000 cycles typical <0mΩ -4VDC, 00mA Dielectric Strength 500Vrms min Insulation Resistance >00MΩ min Operating Temperature -40ºC to 85ºC Storage Temperature -40ºC to 85ºC Materials Actuator Housing Cover Bushing Bracket Contacts Terminals Brass, Chrome Plated Diallyl Phthalate (DAP) Stainless Steel Brass, Nickel Plated Brass, Tin Plated Copper Alloy, Silver or Gold Plated Copper Alloy, Silver Plated Features Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability Up to four poles with seven fuctions available Anti-rotation feature on fl at toggles High torque bushing preventing separation from frame during installation Wide variety of terminal options page
2 Ordering Information. Series ANT 3 T E B Q E ANT. Number of Poles = SPDT = DPDT 3 = 3PDT 4 = 4PDT 3. Switch Function = ON-NONE-ON = ON-NONE-(ON) 3 = ON-OFF-ON 4 = (ON)-OFF-(ON) 5 = ON-OFF-(ON) 6 = ON-ON-ON **See 3-way wiring section for details 4. Actuator T = mm, standard S = 0.4mm, standard X = 3.97mm, standard V = 6.6mm, standard W =.34mm, standard Y = mm, fl at toggle *only available with AR, AR, AN, AN bushing F =.30mm, fl at toggle *only available with AR, AR, AN, AN bushing G =.00mm, fl at toggle *only available with AR, AR, AN, AN bushing K = 3.50mm, fl at toggle *only available with AR, AR, AN, AN bushing Z =.37mm, large toggle *only available with BZ, BZR bushing Z = 7.45mm, large toggle *only available with BZ, BZR bushing LK = 4.73mm, locking toggle, round top *only available with K, K bushing LK = 4.73mm, locking toggle, fl at top *only available with K, K bushing P(color) =.34mm, plastic *see color choices in Actuator Option section PX = 6.30mm, plastic, fl at toggle *only available with BZ, BZR bushing 5. Bushing E / E = 8.89mm, ¼-40NS / non-threaded, keyway F / F = 7.0mm, ¼-40NS / non-threaded, keyway J = 8.89mm, ¼-40NS, flat W = 8.89mm, M6P-0.75 (metric) keyway H = 8.00mm, high torque, ¼-40NS, keyway G = 7.5mm, high tourque, ¼-40NS, flat AR / AR = 7.55mm, anti-rotation, ¼-40NS / non-threaded, keyway AN / AN = 7.55mm, anti-rotation, ¼-40NS / non-threaded, flat BZ =.38mm, 5/3-3NS, keyway BZR =.38mm, 5/3-3NS, keyway with support insert L = 7.55mm, ¼-40NS, keyway, splash proof K / K = 8.00mm, ¼-40NS, non-threaded, keyway ** See actuator option section for bushing availability with various actuators 6. Terminals B = Solder Lug ** Wire wrap terminals available in various lengths, contact factory C = PC Pin D = Quick Connect H = Horizontal Mount, right angle PC pin, HS = Snap-In V = Vertical Mount, right angle PC pin, VS = Snap-In S0 or S5 = PC pin with support bracket, V0 or V5 = Snap-In support bracket S35 or S40 = PC pin with support bracket, V35 or V40 = Snap-In support bracket 7. Contacts Q = Silver plated R = Gold plated G = Gold over Silver plated 8. Epoxy Seal E = Epoxy Seal 9. Actuator Cover Blank = No cover S = for S, T, X, V & W actuators E = for E, F, J, & G bushings Z = for BZ & BZR bushings Actuator Cover Colors = White = Black 3 = Red ** Color choices only available with S toggle cover page
3 Switch Function Toggle Position Function 8.89 [.35] 6.86 [.7] SPDT ON NONE ON ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) POS. 3 POS. POS. EPOXY SEAL 3 Terminals Toggle Position Function ON NONE ON 0.4 [.4].43 [.45] DPDT 5 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) Terminals ON ON ON POS. 3 POS. POS. EPOXY SEAL Terminals Toggle Position 3PDT Function ON NONE ON ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) Terminals POS. 3 POS. POS..06 EPOXY SEAL [.65] Toggle Position Function 4PDT 5 8 ON NONE ON ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) Terminals ON ON ON POS. 3 POS. POS..06 EPOXY SEAL 0.59 [.85] TYP Terminals page 3
4 Actuator Options Actuator lengths shown with E bushing, subtract.78mm for F/F bushing, subtract 0.5mm for M bushing.9 [.] 0.67 [.4].9 [.] [.64] [.84] [.55] S T V W X Below Actuators only available with AR, AR & AN/AN bushing.54 [.0].43 [.45].54 [.0].33 [.84] 6.48 [.6] [.53] 4.9 [.6].54 [.0] F G K Y Below Actuators only available with BZ & BZR bushing.9.9 Below Actuators only available with K & K Bushing. LK & LK are not available with momentary functions [.] 5.44 [.].07 [.48] 7.5 [.68] 7.88 [.70] UNLOCKED 6.0 [.63] LOCKED 8.59 [.73] UNLOCKED 6.8 [.66] LOCKED 5/3-3 UNS-A.38 [.45] 5/3-3 UNS-A.38 [.45] 6.60 [.6] 6.60 [.6] Z Z LK LK page 4
5 Bushing Options.0.0 ANT.0 Ø [.35] [.8] 5.7 [.3] 8.89 [.35] 5.7 [.3] [.7].0 E - Threaded E - Non-Treaded F - Threaded F - Non-Threaded J - Threaded G - Threaded High Torque H - Threaded High Torque 5.7 [.3] 0.5 Ø.8 [.46] O-RING GROOVE 7.47 [.9] 5.65 [.] 6.5 [.4] [.4] M6 x 0.75 Ø L - Threaded Splash Proof AN - Threaded Anti-Rotation AR - Threaded Anti-Rotation W - Threaded Metric Panel Mounting page 5
6 Terminal Options 3.94 [.6].4 [.0] 0.76 TYP TYP TYP. B C TYP TYP. D W 6.86 [.7] HS (5X) Ø.85 H (HS - Snap-in) = Horizontal mount, right angle PC pins, single pole [.45] HS 4 TYP TYP TYP. (8X) Ø.85 H (HS - Snap-in) = Horizontal mount, right angle PC pins, double pole page 6
7 Terminal Options ANT 6.86 [.7] 3.8 HS TYP. 3.8 TYP. (5X) Ø V (VS - Snap-in) = Vertical mount, right angle PC pins, single pole.43 [.45] 3.8 HS TYP. 3.8 TYP. (8X) Ø V (VS - Snap-in) = Vertical mount, right angle PC pins, double pole 6.5 [.65] 4.35 [.56] [.38] HS 4.35 [.56] 3 TYP TYP. 3.8 TYP. (X) Ø V (VS - Snap-in) = Vertical mount, right angle PC pins, three pole.59 [.85] 4.35 [.56] [.57] HS 4.35 [.56] TYP. TYP. 3.8 TYP. TYP. (4X) Ø V (VS - Snap-in) = Vertical mount, right angle PC pins, four pole page 7
8 Terminal Options SNAP-IN BRACKET (V0 / V5) 8.3 Terminal Option "A" Dimension S0 / V0.68 S5 /V (7X) Ø.85 S0/S5 (V0/V5 - Snap-in) = PC pins with support bracket, single pole BRACKET (V0 / V5) 8.3 Terminal Option "A" Dimension S0 / V0.68 S5 / V (0X) Ø.85 S0/S5 (V0/V5 - Snap-in) = PC pins with support bracket, double pole 8.3 BRACKET (V0 / V5) Terminal Option "A" Dimension S5 / V (3X) Ø [.38] S0/S5 (V0/V5 - Snap-in) = PC pins with support bracket, three pole page 8
9 Terminal Options ANT BRACKET (V0 / V5) 8.3 Terminal Options "A" Dimension S5 / V (6X ) Ø [.57] S0/S5 (V0/V5 - Snap-in) = PC pins with support bracket, four pole Snap - in Bracket (V35 / V40) Terminal Option "A" Dimension S35 / V35.68 S40 / V [.36] (7X) Ø.85 S35 (V35 - Snap-in) = PC pins with support bracket, single pole Snap - in Bracket (V35 / V40) Terminal Option "A" Dimension S35 / V35.68 S40 / V [.36] (0X) Ø.85 S35 (V35 - Snap-in) = PC pins with support bracket, double pole page 9
10 Terminal Options Snap - in Bracket (V35 / V40) Terminal Option "A" Dimension S40 / V [.36] (3X) Ø.85 S40 (V40 - Snap-in) = PC pins with support bracket, three pole Snap - in Bracket (V35 / V40) Terminal Option "A" Dimension S40 / V [.36] (6X) Ø [.57] S40 (V40 - Snap-in) = PC pins with support bracket, four pole Contact Options Designator Contact Material Terminal Material Electrical Ratings Q Silver Plating Silver Plating 0VAC, 8VDC; 50VAC R Gold over Nickel Plating Gold over Nickel Plating 0.4VA 0VAC or VDC max G Gold over Silver Plating Gold over Silver Plateing 0.4VA 0VAC or VDC max or 0VAC, 8VDC; 50VAC page 0
11 Cap Options ANT 9.35 [.76] Ø4.0 [.7] Ø [.63] 8.30 [.7] 7.00 [.67] Ø7.50 Ø8.5.3 [.09] 4.40 [.57] O-ring Groove 0.90 [.43] 3.50 [.4] 4.50 [.96].49 5/3-3 UNS - B Sealing Flange 4.90 [.59].5 [.0] 5.60 [.] 4.75 [.97] 3.6 [.4] 5/3-3 UNS - B Rubber Gasket Seat 7.5 [.68] 3.88 Sealed Boot E Knurled Nut Sealed Boot Z3 Rubber Coated Sealed Boot Z4 Plain Hex Nut Hardware 5/3-3 Hardware 4.00 [.55] 6.3 [.64] Ø.50 Ø5.76 [.49] Ø.05 Ø8.34 [.7] Ø4.8 [.56] Ø0.00 [.39] Ø6.00 [.63] Ø [.56] 5/3-3 UNS-B [.09] 3.56 [.4] Ø3.55 [.53] 4.33 [.7] Ø.95 [.5].85 [.] Hex Nut Lock Washer Locking Ring-Keyway Knurled Nut Dress Nut page
12 Hardware /4-40 Hardware [.36] Ø0.80 [.43] Ø Ø.90 Ø.0 Ø Ø [.3].8 Ø Ø 0.66 Hex Nut Lock Washer Locking Ring-Flat Locking Ring-Keyway Washer-Keyway 8.80 [.35] 3. Ø7.5 [.9] Ø4.90 Ø [.35] 3. Ø7.95 Ø4.90 Ø [.09] 8.80 [.35] Ø7.80 THRU Ø [.44] Ø8.30 [.33] THRU Ø.70 [.46] R5.00 [.59] Ø7.5 [.9] THRU Ø [.09] 7.53 Dress Nut A Dress Nut B Dress Nut C Dress Nut D Dress Nut E Collars Ø8.30 [.7] Ø3.50 [.53] Ø.47 [.49] Ø5.50 [.6] Ø [.4] Ø [.33] Ø0.3 [.40] 6.00 [.4] A B C Knurled Nut Ø8.00 Ø [.8] Toggle Cap S R [.46] Ø5.00 Ø.40 [.09] Ø4.0 [.6] page
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More information.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
More informationS E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
More information.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
More informationSERIES 34A Miniature Toggle Switches
DIP Switches Toggle Switches Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationC&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationSPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationToggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationSPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
More informationSPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
More information7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
More informationSeries 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More information2M Series Sub-Miniature Toggle Switches
M Series Sub-Miniature Toggle Switches SPECIFICATIS CTACT RATING: Dependent upon contact material See Page 8. MECHANICAL LIFE: 0,000 make-and-break cycles. CTACT RESISTANCE: 0 m max. initial @ -VDC 00mA
More informationSnap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
More informationC&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
More informationRockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
More information5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationT80-T Miniature Toggle Switches Compliant
T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial
More informationMiniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
More informationPushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
More information9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More informationET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
More informationET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
More informationTP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More information8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
More information1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
More informationMomentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
More information2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
More information8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationTP Series, Tiny. Features. Pushbutton Switches. Pushbutton Switches
TP Series, Tiny Features Compact design Round or rectangular actuator buttons. Vertical or versions Typical performance characteristics Contact configuration........................ SPST, SPDT, DPDT Contact
More informationProduct Range. Keylock Switches. Keylock Switches. Keylock Switches
Product Range Medium Security : 2SWK, SKF Series High Security : SWK Series Main features: SPST type - 5 disc tumbler versions SPST type - 8 disc tumbler versions DPDT type - 4 disc tumbler versions All
More informationC&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
More informationMiniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
More information5000 SERIES - MINIATURE TOGGLE SWITCHES
000 SERES - MNATURE TOGGLE SWTCHES A SPECFCATONS SUBJECT TO CHANGE WTHOUT NOTCE FEATURES Broadest selection offered in miniature switches. SPDT, DPDT, PDT & PDT models with numerous options. Numerous configurations
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More information8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
More information7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
More informationST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINIATURE TOGGLE SWITCHES K FEATURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
More information600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview
600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6
More informationT101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.
T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you
More informationC&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
More informationSP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
More informationT Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
More informationSecurity Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
More informationDistinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
More informationGT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More informationT80-R Miniature Rocker and Paddle Switches Compliant
T80-R Miniature Rocker and Paddle Switches Compliant TCT DIP PUSH BUTT SLIDE ECIFICTIS MTERILS CTCT RTING: @ VC or 8 VDC ( Q terminal) CSE - diallyl phthalate ( ) ELECTRICL LIFE: 0,000 make-and-break cycles
More informationAV SERIES PUSHBUTTON SWITCHES Distinctive features
PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing
More informationRotary Switches Product Selection Guide
Switches Product Selection Guide Series A RTA M R F H RW RM ENC Switch Type Multi-pole/ Multi-position Multi-pole/ Multi-position Half-inch Rota-slide Rota-slide Power Rota-slide Subminiature SMT Subminiature
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
More informationEP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
More informationSeries 47B: Sealed Miniature Rocker and Paddle Switches
Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP
More informationMiniature Switches. Rocker, Toggle, Pushbutton & Slide
Worldwide Headquarters Carling Technologies, Inc., Connecticut, USA (860) 793-928, fax: (860) 793-923 e-mail: sales@carlingtech.com Eastern U.S. and Eastern Canada: (860)586-843, fax: (860) 586-853 e-mail:
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More informationY Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
More information600H and 600NH series Toggle switches - high amperage
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts
More informationEP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
More informationAV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
More information12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES
000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE FETURES Designed for high reliability environments. Double shell case for high mechanical strength & high electrical
More informationSealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
More informationC&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
More informationGT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More information