C&K 8020 Series Snap-acting Momentary Pushbutton Switches
|
|
- Mary Wade
- 5 years ago
- Views:
Transcription
1 Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications Instrumentation Computer peripherals Telecommunications equipment Models vailable Specifications CONTCT RTING: B contact material (8X25 Models): 0.4 V 20 V C or DC maximum. G contact material (8X21, U8X1 Models): V C or 28 V DC or 0.4 V 20 V C or DC max. Note: Break-before-makecontacts. Multi-pole contacts do not make and break simultaneously. See page -41 for additional ratings. ELECTRICL LIFE: 60,000 make-and-break cycles at full load. CONTCT RESISTNCE: Below 50 mω typ. 2-4 V DC, 100 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 10 9 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms sea level. OPERTING TEMPERTURE: 8X2X MODELS: 30ºC to 75ºC. U8X1 MODELS: 30ºC to 65ºC. CP INSTLLTION FORCE: 10 lbs. max. permissible. SOLDERBILITY: Per MIL-STD-202F method 208D, or EI RS-186E method 9 (1 hour steam aging). NOTE: ny models supplied with B, P, R, or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: /rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CSE: Glass filled nylon 6/6 or diallyl phthalate (DP), flame retardant (UL 94V-0). PLUNGER: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0). CP & FRME: Nylon, black, standard. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. N.O. & N.C. CONTCTS: 8X21, U8X1 MODELS: G contact material: Coin silver, with gold plate over nickel plate. See page -41 for additional contact materials. 8X25 MODELS: B contact material: Copper alloy, with gold plate over nickel plate. See page -41 for additional contact materials. COMMON CONTCT & LL TERMINLS: Copper alloy, with gold plate over nickel plate. TERMINL SEL: Epoxy. Refer to slodering and cleaning Technical Data Chapter. HRDWRE: Nut & Locking Ring: Brass, nickel plated; Lockwasher: Steel, nickel plated. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -28 thru -43. For additional options not shown in catalog, consult Customer Service Center. ll models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods. Switch Function 8121 On-Mom. 1 mp 8125 On-Mom. 0.4V 8221 DPDT On-Mom. 1 mp 8225 DPDT On-Mom. 0.4V PDT On-Mom. 1 mp PDT On-Mom. 0.4V PDT On-Mom. 1 mp PDT On-Mom. 0.4V Note: UL/CS models available, see page -28 and -29. ctuator or Plunger S Plunger NONE Snap-in J80 Snap-in J81 Snap-in w/frame J82 Snap-in w/frame for LED J83 Snap-in w/frame & flush cap J84 Snap-in w/frame for LED, flush cap J85 Snap-in w/frame & LED J95 PC w/v-bracket & LED L Plunger M Snap-fitting plunger Terminations Right angle, PC thru-hole V2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug 2 Right angle, PC thru-hole 3 Right angle, snap-in, PC thru-hole Bushing D9.280" high, keyway H.250" high, flat NONE No bushing choice required D.280" high, keyway D2.288" high, flat D3.180" high D8.288" high, flat H9.250" high, flat, hi torque Y.350" high, keyway Y3 6.35mm high, keyway, hi torque Y4.378" high, flat, hi torque Y9.350" high, keyway 4 Right angle, PC thru-hole, reversed terminals 6 Right angle, PC thru-hole V Vertical right angle, PC thru-hole V1 Vertical right angle, PC thru-hole V3 Vertical right angle, snap-in, PC thru-hole R Right angle with PCB R2 Right angle with PCB, reversed terminals Contact Material B Gold K Gold, tin-lead P Gold, matte-tin G Gold over silver L Gold over silver, tin-lead R Gold over silver, matte-tin Seal E Epoxy I Epoxy potted base Cap Color 2 Black NONE Models without caps 1 White 3 Red V2.555" high, V-bracket V3.460" high, V-bracket V4.630" high, V-bracket V6.460" high, V-bracket V7.630" high, V-bracket V8.953" high, V-bracket V " high, V-bracket 4 Orange 5 Yellow 6 Green 7 Blue 9 Gray Frame Color 2 Black NONE Models without frame 1 White 3 Red 5 Yellow 6 Green 9 Gray LED Color 3 Red NONE Models without LED 5 Yellow 6 Green V31.460" high, snap-in V-bracket V61.460" high, snap-in V-bracket W.750" long, wire wrap W1.964" long, wire wrap W3.425" long, wire wrap W " long, wire wrap Z3 Quick connect 27
2 SWITCH FUNCTION NO. POLES SP MODEL NO UL/CS* MODEL NO. U811 SWITCH FUNCTION POS. 1 POS. 2 C&K marking on opposite side ON ON MOM. MOM. CONNECTED TERMINLS POS. 1 POS C&K marking on opposite side 1-2 SCHEMTIC Part number shown: 8121SHZGE Terminal Nos. For Reference Only DP U821 ON ON MOM. MOM. 1-3, ,4-5 DPDT DPDT Part number shown: 8221SHZGE Terminal Nos. For Reference Only 3P U831 ON ON MOM. MOM. 1-3,4-6, ,4-5,7-8 3PDT 3PDT Part number shown: 8321SHZGE MOM. = Momentary *U811 thru U841 model numbers with all options (except R, R2 terminations) when ordered with G,L or R contact material. Terminal Nos. For Reference Only 8X25 models must be ordered with B, K or P contact material. 8X21 and U8X1 models must be ordered with G, L or R contact material. Third ngle 28
3 SWITCH FUNCTION NO. POLES 4P MODEL NO UL/CS* MODEL NO. U841 SWITCH FUNCTION POS. 1 POS. 2 C&K marking on opposite side ON ON MOM. MOM. CONNECTED TERMINLS POS. 1 POS ,4-6,7-9,10-12 C&K marking on opposite side 1-2,4-5,7-8, PDT SCHEMTIC 4PDT Part number shown: 8421SHZGE MOM. = Momentary * U811 thru U841 model numbers with all options (except R, R2 terminations) when ordered with G, L or R contact material. Terminal Nos. For Reference Only 8X25 models must be ordered with B, K or P contact material. 8X21 and U8X1 models must be ordered with G, L or K contact material. CTUTOR SNP-IN FRONT MOUNT CTUTOR OR PLUNGER CP COLOR FRME COLOR J80 SNP-IN PNEL MOUNTING CP ND FRME COLOR ** 2 BLCK NONE No Frame Color (J80 option) 1 WHITE 3 RED 4 ORNGE 5 YELLOW 6 GREEN NOTE: No frame color choice required. ** Increase this dim. to.620/.625 (15,75/15,88) for.091/.125 (2,31/3,18) thk. panels. J81 SNP-IN WITH FRME 7 BLUE 9 GRY PNEL MOUNTING Other colors available, consult Customer Service Center. Cap and Frame Finish: matte. NOTE: Caps and frames available separately, see pages -42 and -43. ** NOTE: vailable with C, W-W4, Z or Z3 terminations and and DPDT models only. ** Increase this dim. to.620/.625 (15,75/15,88) for.091/.125 (2,31/3,18) thk. panels. Third ngle 29
4 J83 CTUTOR SNP-IN FRONT MOUNT SNP-IN WITH FRME ND FLUSH CP CTUTOR OR PLUNGER ** CP COLOR FRME COLOR PNEL MOUNTING J82 SNP-IN WITH FRME FOR LED LED not included. For LED information, see page -43. J84 SNP-IN WITH FRME FOR LED, FLUSH CP LED not included. For LED information, see page -43. CP ND FRME COLOR 2 BLCK 1 WHITE 3 RED 4 ORNGE 5 YELLOW 6 GREEN 7 BLUE 9 GRY Other colors available, consult Customer Service Center. Cap and Frame Finish: matte. vailable with C, W-W4, Z or Z3 terminations and and DPDT models only. NOTE: Caps and frames available separately, see pages -42 and -43. Third ngle 30
5 J85 CTUTOR SNP-IN FRONT MOUNT SNP-IN WITH FRME ND LED CTUTOR OR PLUNGER PNEL MOUNTING * CP COLOR LED COLOR FRME COLOR * Increase this dim. to.620/.625 (15,75/15,88) for.091/.125 (2,31/3,18) thk. panels. 8121J85ZGE223 SPST vailable with C, W-W4, Z or Z3 terminations and models only. For LED information see page -43. NOTE: Caps & frames available separately, see pages -42 and BLCK 1 WHITE 3 RED 4 ORNGE 5 YELLOW 6 GREEN 7 BLUE 9 GRY CP ND FRME COLOR LED COLOR 3 RED 5 YELLOW 6 GREEN For LED information see page -43. CTUTOR PC MOUNT CTUTOR OR PLUNGER CP COLOR LED COLOR J95 PC WITH V-BRCKET ND LED CP ND FRME COLOR LED COLOR NOTE: Caps available separately, see page -42. vailable with V3 terminations and models only. 2 BLCK 1 WHITE 3 RED 4 ORNGE 5 YELLOW 6 GREEN 7 BLUE 9 GRY 3 RED 5 YELLOW 6 GREEN For LED information see page J95V3GE23 SPST Third ngle 31
6 S PLUNGER PLUNGER VILBLE BUSHINGS CTUTOR OR PLUNGER DIM. FOR C, W-W4, Z & Z3 TERMINTIONS DIM. FOR, 2, 3, 4, 6, V-3, R & R2 TERMINTIONS DIM. FOR V3-V61 TERMINTIONS D, D9.244 (6,20).228 (5,79).224 (5,69) H, H9.218 (5,54).202 (5,13).198 (5,03) Y, Y9.203 (5,16).187 (4,75).183 (4,65) Y3 (5,54) (5,13) (5,03) NONE NO PLUNGER CHOICE REQUIRED (JXX CTUTORS) Y4.185 (4,70).169 (4,29).165 (4,19) D2, D8 N/.232 (5,89).228 (5,79) D3 N/.162 (4,11).158 (4,01) L PLUNGER VILBLE BUSHINGS DIM. B FOR C, W-W4, Z & Z3 TERMINTIONS DIM. B FOR, 2, 3, 4, 6, V-3, R & R2 TERMINTIONS DIM. B FOR V3-V61 TERMINTIONS Y, Y9.178 (4,52).162 (4,11).158 (4,01) Y4.090 (2,29).074 (1,88).070 (1,78) M SNP-FITTING PLUNGER VILBLE BUSHINGS DIM. C FOR C, W-W4, Z & Z3 TERMINTIONS DIM. C FOR, 2, 3, 4, 6, V-3, R & R2 TERMINTIONS DIM. C FOR V3-V61 TERMINTIONS D, D9.297 (7,54).281 (7,14).277 (7,04) H, H9.267 (6,78).251 (6,38).247 (6,27) Y, Y9.259 (6,58).243 (6,17).239 (6,07) Y3 (6,78) (6,37) (6,27) Y4.259 (6,58).243 (6,17).239 (6,07) D2, D8 N/.273 (6,93).269 (6,83) D3 N/.361 (9,17).357 (9,07) N/ = NOT VILBLE NOTE: When selecting plunger option, bushing selection must also be made, see next page. No plunger option is required when any JXX actuator option is selected. dditional plunger lengths are available on and DPDT models, consult Customer Service Center. Not all plunger lengths sufficient for use with caps, see page -42. BUSHING NONE NO BUSHING CHOICE REQUIRED (JXX CTUTORS) D.280" HIGH THREDED, KEYWY D9.280" HIGH UNTHREDED, KEYWY H.250" HIGH THREDED, FLT H9.250" HIGH UNTHREDED, FLT Y.350" HIGH THREDED, KEYWY Y9.350" HIGH UNTHREDED, KEYWY 1/4-40 UNS-2 D9 bushing standard with -6, R, R2 V-V3 terminations. H bushing standard with C, W-W4, Z or Z3 terminations. H, H9 bushings not available on single pole models with 3-6, R, R2 terminations. Will withstand 12 in./lbs. of torque with no distortion. Third ngle 32
7 Y3 6.35mm THREDED, KEYWY BUSHING Y4.378" HIGH THREDED, FLT D2 D8.288" HIGH THREDED, FLT.288" HIGH UNTHREDED, FLT D3.180" HIGH UNTHREDED 1/4-40 UNS-2 Y3 & Y4 bushings not available on single pole models with 3-6, R, R2 terminations. Will withstand 12 in./lbs. of torque with no distortion. D2, D8 bushings not available with C, W-W4, Z, Z3 terminations. NOTE: No bushing option choice required when JXX actuator option is selected. When selecting bushing option, plunger selection must also be made, see previous page. Plunger lengths vary with bushing and termination options selected. D3 bushing available with, 2, 3, V, V2, V3 and V2-V61 terminations only. NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Optional mounting nut and locking ring styles available, see section Technical Data and dditional Hardware. TERMINTIONS Z SOLDER LUG C PC THRU-HOLE thru 4PDT Not available with J95 actuator, K, L, P or R contact material. thru 4PDT Not available with J95 actuator option. Z3 QUICK CONNECT W W1, W3, W4 WIRE WRP DIM W.750 (19,05) DIM `' W1.964 (24,49) W3.425 (10,80) W (26,97) thru 4PDT Not available with J95 actuator, K, L, P or R contact material. Mating quick connector available,order part number , page -42. thru 4PDT Not available with J95 actuator option. Third ngle 33
8 RIGHT NGLE, PC THRU-HOLE TERMINTIONS 8121SD9GE.138 (3,51) 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE RIGHT NGLE, PC THRU-HOLE 8221SD9GE DPDT SECTION - 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE Not available with JXX actuators and I seal option. Third ngle 34
9 RIGHT NGLE, PC THRU-HOLE TERMINTIONS 8321SD9GE 3PDT SECTION - Not available with JXX actuators and I seal option. 2 RIGHT NGLE, PC THRU-HOLE 8121SD92GE Not available with JXX actuators, I seal option. 4 RIGHT NGLE, PC THRU-HOLE, REVERSED TERMINLS 8121SD94GE Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal. The 4 and R2 termination options are functionally identical and fit the same PC mounting pattern. The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the switch support legs. Unlike the R2, the 4 option is available with UL/CS. Third ngle 35
10 6 RIGHT NGLE, PC THRU-HOLE TERMINTIONS 8121SD96GE Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal. The 6 and R termination options are functionally identical and fit the same PC mounting pattern, The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the switch support legs. Unlike the R, the 6 option is available with UL/CS. R RIGHT NGLE WITH PCB 8121SD9RGE Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option. R termination not UL/CS approved. R2 RIGHT NGLE WITH PCB, REVERSED TERMINLS 8121SD9R2GE Reversed terminals Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option. R2 termination not UL/CS approved. V VERTICL RIGHT NGLE, PC THRU-HOLE,.100" PITCH 8121SD9VGE Third ngle 36
11 V2 TERMINTIONS VERTICL RIGHT NGLE, PC THRU-HOLE,.150" PITCH 8121SD9V2GE V3 VERTICL RIGHT NGLE, SNP-IN,, PC THRU-HOLE,.150" PITCH V1 VERTICL RIGHT NGLE, EXTENDED, PC THRU-HOLE,.150" PITCH V2 VERTICL RIGHT NGLE, PC THRU-HOLE,.150" PITCH 8221SD9V2GE DPDT V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150" PITCH V1 VERTICL RIGHT NGLE, EXTENDED, PC THRU-HOLE,.150" PITCH.15 (3,8).33 TYP. (8,4) Third ngle 37
12 V2 TERMINTIONS VERTICL RIGHT NGLE, PC THRU-HOLE, 150" PITCH 8321SD9V2GE 3PDT V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150" PITCH V1 VERTICL RIGHT NGLE, EXTENDED, PC THRU-HOLE,.150" PITCH.15 (3,8) V2 VERTICL RIGHT NGLE, PC THRU-HOLE, 150" PITCH.33 TYP. (8,4) V3 8421SD9V2GE 4PDT VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150" PITCH V1 VERTICL RIGHT NGLE, EXTENDED, PC THRU-HOLE,.150" PITCH V2, V6, V7, V8 VERTICL MOUNT, V-BRCKET V61 VERTICL MOUNT, V-BRCKET, SNP-IN DIM V2.555 (14,10) V6, V (11,68) 8121SD3 GE V7.630 (16,00) V8.953 (24,21) Third ngle 38
13 TERMINTIONS V2, V6, V7, V8 VERTICL MOUNT, V-BRCKET V61 VERTICL MOUNT, V-BRCKET, SNP-IN 8221SD3 GE DPDT DIM V2.555 (14,10) V6, V (11,68) V7.630 (16,00) V8.953 (24,21) V2, V7, V8 VERTICL MOUNT, V-BRCKET 8321SD3 GE 3PDT DIM V2.555 (14,10) V7.630 (16,00) V8.953 (24,21) V2, V7, V8 VERTICL MOUNT, V-BRCKET 8421SD3 GE 4PDT DIM V2.555 (14,10) V7.630 (16,00) V8.953 (24,21) Third ngle 39
14 V3, V4, V9 VERTICL MOUNT, V-BRCKET V31 VERTICL MOUNT, V-BRCKET, SNP-IN TERMINTIONS 8121SD3 GE DIM V3, V (11,68) V4.630 (16,00) Not available with J8X actuators and I seal. V (29,21) V3, V4, V9 VERTICL MOUNT, V-BRCKET V31 VERTICL MOUNT, V-BRCKET, SNP-IN 8221SD3 GE DPDT DIM V3, V (11,68) V4.630 (16,00) V (29,21) Not available with J8X actuators and I seal. V4, V9 VERTICL MOUNT, V-BRCKET.630 (16,00) 8321SD3V4GE 3PDT DIM V4.630 (16,00) V (29,21) Third ngle 40
15 V4, V9 VERTICL MOUNT, V-BRCKET TERMINTIONS.630 (16,00) 8421SD3V4GE 4PDT DIM V4.630 (16,00) V (29,21) CONTCT MTERIL RoHS COMPLINT * RoHS COMPTIBLE * CONTCT MTERIL TERMINL PLTING RTINGS B K P G L R NO NO GOLD 1 GOLD OVER SILVER 2,3 GOLD 1 TIN-LED 4 MTTE-TIN 5 GOLD 3 TIN-LED 4 MTTE-TIN 5 LOW LEVEL/DRY CIRCUIT LOW LEVEL/DRY CIRCUIT OR POWER 8x25 MODELS ONLY: V C OR DC MX. 8X21, U8X1 MODELS ONLY: 0.4 V 20 V C OR DC MX. OR V C OR 28 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 LL CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. 2 N.O. ND N.C. CONTCTS: Coin silver, with gold plate over nickel plate. 3 COMMON CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 TERMINLS: Copper alloy, with tin-lead alloy over nickel plate. 5 TERMINLS: Copper alloy, with matte-tin over nickel plate. NOTE: ny models supplied with B, P, R or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: /rohs. U811-U841 models with all options (except R, R2 terminations) when ordered with mandatory G, R or L contact material. B, P or K contact material must be ordered with 8X25 models. G, R or L contact material must be ordered with 8X21, U8X1 models. P, R, K or L contact material not available with Z, Z3 terminations. SEL E EPOXY SEL I EPOXY POTTED BSE NO. POLES DIM SP.410 (10,41) DP.440 (11,18) 3P.505 (12,83) 4P.505 (12,83) NOTE: vailable with C, W-W4, Z, Z3 terminations only. Third ngle 41
16 VILBLE HRDWRE Cap PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY Cap PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY Cap PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY Finish: Gloss Finish: Gloss Finish: Gloss Cap, Snap-fitting plunger Cap, Snap-fitting plunger Cap, J80, J81, J82, J83 & J84 options only PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY Finish: Gloss Finish: Gloss Finish: Gloss Finish: Matte Frame Frame Cap, J85 & J95 options only PRT NO WHITE BLCK RED YELLOW GREEN GRY Finish: Matte PRT NO WHITE BLCK RED YELLOW GREEN GRY Finish: Matte PRT NO Finish: Gloss PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY Finish: Matte Fits Z3 Termination female connector PRT NO vailable in loose pieces. NOTE: dditional nuts, locking rings and lockwashers available separately, see section Technical Data and dditional Hardware. Other cap & frame colors available, consult Customer Service Center. Third ngle 42
17 VILBLE HRDWRE Frames snap into panel opening and are independent from switch mounting. ccurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. vailable in two basic styles and four panel thicknesses in.. Finish: Matte..047" (1,19) PNEL THK..062" (1,57) PNEL THK..090" (2,29) PNEL THK. TYPICL PPLICTION.125" (3,18) PNEL THK. PRT NO. PRT NO. PRT NO. PRT NO WHITE BLCK RED YELLOW GREEN GRY Panel Inserts bove frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PNEL INSERT WITH HOLE FOR LED PRT NO BLNK PNEL INSERT WITHOUT HOLE FOR LED PRT NO WHITE BLCK RED YELLOW GREEN GRY Special colors, custom markings available, consult Customer Service Center. LED INFORMTION SWITCHES WITH LED SUPPLIED: J85, J95 S: Rectangular LEDs are supplied on 8020 Series pushbutton switches with J85 and J95 options. These LEDs are factory installed and are not replaceable. The following specifications apply: COLOR Green Red* Yellow TYP. INTENSITY 1.0 mcd 0.5 mcd 4.0 mcd TYP. FORWRD VOLTGE 2.1 V TYP. FORWRD CURRENT 20 m 10 m 20 m MX RTINGS T 25ºC MBIENT TEMPERTURE FORWRD CONTINUOUS POWER VOLTGE FORWRD CURRENT DISSIPTION 50 m 30 m 50 m Process Information: Soldering to LED leads must be completed within 5 seconds at 500ºF (260ºC) maximum. Caution: Circuit elements must limit forward current of LED to 50m max. continuous. * Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center. LEDs are not supplied with J82, J84 options. LED snaps into switch frame surrounding actuator and is wired externally. 2.5 V mw 75 mw 125 mw Flat denotes cathode..230 DI. (5,84 ).200 DI. (5,08 ).030 (0,76).025 SQ. TYP. (0,63).340 (8,64) Suggested LED for J82 & J84 options. Dimensions for reference only. Third ngle.750 (19,05)
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More information8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
More informationC&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
More informationTP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
More information8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
More informationPushbutton Product Selection Guide
Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws
More informationEP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
More informationEP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
More informationEP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
More information7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
More informationC&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationT Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
More information7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
More informationC&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
More informationC&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationRockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More informationET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
More informationET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationC&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
More informationC&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
More informationT80-R Miniature Rocker and Paddle Switches Compliant
T80-R Miniature Rocker and Paddle Switches Compliant TCT DIP PUSH BUTT SLIDE ECIFICTIS MTERILS CTCT RTING: @ VC or 8 VDC ( Q terminal) CSE - diallyl phthalate ( ) ELECTRICL LIFE: 0,000 make-and-break cycles
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationToggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
More informationMiniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
More informationF Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationT80-T Miniature Toggle Switches Compliant
T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial
More information9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Switches Features/Benefits Up to 10 poles per module Various contact terminals
More informationSPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationMiniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationSnap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
More informationDM Series Miniature Illuminated Power Rocker Switches
Miniature Illuminated Power Switches Features/Benefits AMPS to AMPS Illuminated LED Positive detent RoHS compliant Typical Applications Instrumentation Industrial Office machines UL 658-1 Specifications
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationT101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.
T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you
More informationC&K NE-18 Series Mains / Power Switches
C&K NE-18 Series Features/Benefits Chassis or panel mount Various buttons and illumination Various contact configurations Typical pplications Mains/power switching Consumer electronics udio equipment Digital
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationSeries 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
More informationGT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More informationDistinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
More informationC&K LM Series Subminiature Precision Snap-acting Switches
Models vailable Features/enefits Sealed actuator and case meets IP65 degree of protection Compact size ideal when space is limited Long life 100,000 cycles typical Reliable snap-acting mechanism Typical
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
More informationC&K GT Series Sealed Ultraminiature Toggle Switches
C&K T Series Sealed Ultraminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available poxy terminal seal compatible with bottom-wash cleaning Typical Applications Test & measurement equipment
More informationC&K EP Series Sealed Tiny Pushbutton Switches
Models Available Features/enefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available Typical Applications
More informationSPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationSealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
More informationDM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
More informationPushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationRTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
More informationSwitch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT
EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationRotary Switches Product Selection Guide
Switches Product Selection Guide Series A RTA M R F H RW RM ENC Switch Type Multi-pole/ Multi-position Multi-pole/ Multi-position Half-inch Rota-slide Rota-slide Power Rota-slide Subminiature SMT Subminiature
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationTYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
More informationY Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
More information151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
More informationGT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More information.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationPROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationTF2 Series Miniature Snap-acting Switches
Miniature Snapacting Switches Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationAC INLETS & OUTLETS IEC 320 & MINI IEC CONNECTORS IEC SERIES
C INLETS & OUTLETS IEC 30 & MINI IEC CONNECTORS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
More informationAdam Technologies, Inc.
iec 320 & mini iec CoNNeCTorS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE and other applicable
More information.138 (3.50).024 (0.60) .370 (9.40) .185 (4.70) TYP. EPOXY SEAL.030 (0.80) .083 (2.11).740 (18.7) TYP. Standard Paddle Color - (Black) EPOXY SEAL
The Gemini Series "" Series Paddles Refer to Pages -7 For dditional Options MTRIL SPCIFICTIONS: Contacts/Terminals... Gold/gold flash Silver/tin lead Case Material... Thermoset 9V-0 ctuator Material...
More informationTYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
More informationGeneral Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More information