|
|
- Rebecca Banks
- 5 years ago
- Views:
Transcription
1 Distributed by: The content and copyrights of the attached material are the property of its owner.
2 Switches Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons Illumination options Typical pplications udio selection Digital equipment interface Medical equipment interface Specifications SWITCHING POWER: F module max. C/DC: Silver: 50 V/15W, Gold: 1 V/300 mw. SWITCHING VOLTGE: F module max. C/DC: Silver: 125/30V, Gold: 50/30 V. SWITCHING CURRENT: F module max. C/DC: Silver: 0.5/0.5, Gold: 0.04/0.01. CRRYING CURRENT: Max at du = 20C: Silver: < 2, Gold: <0.5. DIELECTRIC STRENGTH (50 Hz, 1 min.): Chassis/contact: ^ 1500V Between contacts: ^ 1500V OPERTING LIFE O/EE (24V/200m): >10 5 operations GR : >3.5 x 104 operations. CONTCT RESISTNCE: Initial: Typical % 10 mω, max. 20 mω fter operating life: % 100 mω INSULTION RESISTNCE: ^ 10 9 Ω between open contacts, ^ 10 9 Ω between chassis and contacts. CPCITNCE (at f = 10 khz): % 0.7 pf between 2 contacts. TOTL TRVEL/LTCHING TRVEL: 4.7mm/3.3mm (.185 inch/.130 inch) NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. TYPICL F OPERTING FORCE: 2U: 6.5N (650 grams); 4U: 6.5N (650 grams); 6U: 7.5N (750 grams); 8U: 9.0N (900 grams); 10U: 9.0N (900 grams). EUROPEN TYPICL SF OPERTING FORCE: 2U: 3.5N±0.5N (350 grams±100 grams); 4U: 5N±1N (500 grams±100 grams); 6U: 6.5N±1N (650 grams±100 grams); 8U: 9.0N±1N (900 grams±100 grams). Materials HOUSING: Polycarbonate UL 94V-0 or polyester UL 94V-0. CTUTOR: Polyester UL 94V-0. MOVBLE CONTCTS: Bimetal brass, silver plated, gold plate over nickel. STTIONRY CONTCTS & TERMINLS: Brass, silver plated, gold plated. TERMINL BORD: Polyester UL 94V-0. RETURN SPRING: Music wire. TERMINL SEL: RTV adhesive sealant. CHSSIS: Steel. LOCKOUT PIN: Steel. BLOCKERS: Steel. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -88 thru -96. For additional options not shown in catalog, consult Customer Service Center. If requesting only a switch, select either a North merican or European switch as noted below. Chassis and buttons are sold separately. If multiple stations are selected, we will assume all switches are the same unless noted otherwise. North merican Order Code - Switch Only Designation F (STD.) F Series FLT Light touch F series ZF Central mounted F series Contact rrangement 2U 2PDT Mechanical Function 4U 4PDT O Momentary 6U 6PDT EE lternate (push-push) 8U BPDT GR Interlock 1OU 1OPDT OR Central release OSP Momentary with lockout GRSP Interlock with lockout Terminal Sealing (NONE) (STD.) None TB Top/bottom Terminal Style (NONE) (STD.) Solder lugs & PC pins 01 Cut solder lugs 01B Cut PC pins, for other configurations, consult factory Electrical Function (NONE) (STD.) BBM M MBB (special) Contact Material (NONE) (STD.) Silver, G U Gold Dress nut* *Central mounted F series only (NONE) (STD.) No dress nut B Black C Chrome -85
3 Switches European Order Code - Switch Only *Minimum order quantities apply. Designation SF (STD.) F Series ZF Central mounted F series Contact rrangement 2U 2PDT 4U 4PDT Mechanical Function 6U 6PDT O Momentary 8U BPDT EE lternate (push-push) GR Interlock Terminal Style (NONE) (STD.) Solder lugs & PC pins LB Cut solder lugs PB Cut PC pins, for other configurations, consult factory Electrical Function (NONE) (STD.) BBM Contact Material (NONE) (STD.) Silver, G P Gold Dress nut* *Central mounted F series only (NONE) (STD.) No dress nut B Black C Chrome Order Code - Buttons Solid Buttons Illuminated Buttons with Chassis Style F01 FMR F02 FG* F03 F1.12-H-5 F06 F1.12-H-4 F07 F1.15-H-4 F12 FSC F13 FSD F14 FU12 F15 FSB F16 FE F19 F F21 F001 Button Color 01 (STD.) Black 02 White 03 Red 04 Light gray 09 Chrome, standard for F03 only Black/chrome, standard for F06 & F07 only Style F21 FRV F22 FSR Shell Color 01 (STD.) Black Lens Color 02 White 03 Red 06 Yellow 08 Green 12 Orange 16 Clear / White North merican Lamp 01 6V / 30ma 02 12V / 30ma 03 24V / 30ma European Lamp 04 5V / 60ma 05 6V / 40ma 06 12V / 40ma 07 24V / 20ma Lamp Holder FL1 FL2 Mechanical Indicator Buttons Central Mounted Illuminated Buttons Style F01 F100 F02 F101 F05 F110 F07 F120 F08 F2O1 F11 F200* Shell Color 01 (STD.) Black Out Position Color 01 (STD.) Black In Position Color 02 White 06 Yellow 07 Blue 08 Green 12 Orange *Button options for central mounting configurations, use FG for central mount with chrome dress nut, use F200, FLB or FLC for central mount with black dress nut. Style F24 FLB* (F200) F25 FLC* Shell Color 01 (STD.) Black 02 White 05 Gray Lens Color 03 Red 06 Yellow 07 Blue 08 Green 12 Orange 16 Clear/White Light Type 01 Lamp, 6V 02 Lamp, 12V 03 Lamp, 28V 04 LED, green 05 LED, red 06 LED, yellow 07 Neon, C Lamp Holder LZ1 LZ2 BUTTON REMOVL button of a push-push switch should only be removed in the OFF non-latching position. -86
4 Switches Order Code - Chassis To order a switch with chassis, create the switch part number listed above and add the Chassis part number configurator information at the end of the part number. Note: We do not guarantee or recommend interlocking beyond 10 stations. *Minimum order quantities apply. No. of Stations 01 thru 23 Comes with standard.094 (2,4mm) mounting holes Note: Single station chassis available with special mounting configurations, consult factory. C Spacing between Stations 00 Single station 10 10mm mm 15 15mm mm 20 20mm Special cknowledgements See note SWITCHES WITH STNDRD OPTIONS F2UEE CONTCT RRNGEMENT LENGTH DIM L 2U (21,00) 4U (33,00) 6U (45,00) 8U (57,00) 10U (69,00) ZF2UEEBF LZ1 CONTCT RRNGEMENT LENGTH DIM L 2U (21,00) 4U (33,00) 6U (45,00) 8U (57,00) 10U (69,00) -87
5 C&K F Series Switches Designation, North merica F (STD.) F Series FLT Light touch F series ZF Central mounted F series DESIGNTION CONTCT RRNGEMENT Designation, Europe SF (STD.) F Series ZF Central mounted F series PC MOUNTING 2U NO. OF POLES 2PDT SCHEMTIC 4U 6U 8U 10U 4PDT 6PDT 8PDT 10PDT 2X 3X 4X 5X MECHNICL FUNCTION North merica Europe FUNCTION FUNCTION O Momentary O Momentary EE lternate (push-push) EE lternate (push-push) GR Interlock GR Interlock OR Central release OSP Momentary with lockout GRSP Interlock with lockout TERMINL SELING (NONE) (STD.) NO SEL TB TOP & BOTTOM SELING TOP & BOTTOM F2UEE shown in example above. -88 NOTE: vailable for North merica only Third ngle
6 Switches TERMINL (NONE) (STD.) SOLDER LUGS & PC PINS 01 CUT SOLDER LUGS (North merica) 01B CUT PC PINS (North merica) LB CUT SOLDER LUGS (Europe) PB CUT PC PINS (Europe) ELECTRICL FUNCTION (NONE) (STD.) M FUNCTION BBM Non-shorting MBB Shorting (North merica only) CONTCT MTERIL NORTH MERIC EUROPE MTERIL RTING (NONE) (STD.) (NONE) (STD.) Silver, G 50 V/15 W; 125/30 V; 0.5/0.5 U P GOLD 1 V/300mW; 50/30 V; 0.04 /0.01 DRESS NUT (NONE) (STD.) NO DRESS NUT FOR F & F/LT DESIGNTIONS B BLCK C CHROME PNEL CUTOUT PNEL CUTOUT NOTE: vailable with ZF designation and FG button. NOTE: vailable with ZF designation and F200, FLB or FLC buttons. Third ngle -89
7 Switches SOLID BUTTON F01 FMR F02 FG F12 FSC F13 FSD F14 FU12 F03 F1.12 H 5 F06 F1.12 H 4 F07 F1.15 H 4 01 (STD.) BLCK 02 WHITE 03 RED 04 LT. GRY BLCK/CHROME 09 (F03,F06 & F07 buttons only Third ngle -90
8 Switches SOLID BUTTON F15 FSB F16 FE 01 (STD.) BLCK F19 F F21 F WHITE 03 RED 04 LT. GRY MECHNICL BUTTON SHELL OUT POSITION IN POSITION F01 F100 F02 F101 Third ngle -91
9 Switches MECHNICL BUTTON SHELL OUT POSITION IN POSITION F05 F110 F07 F120 F08 F201 F11 F200 SHELL IN POSITION 01 (STD.) BLCK 02 WHITE 06 YELLOW OUT POSITION 01 (STD.) BLCK 07 BLUE 08 GREEN 12 ORNGE Third ngle -92
10 ILLUMINTED BUTTON WITH CHSSIS F21 FRV F22 FSR C&K F Series Switches SHELL LENS LMP LMP HOLDER SHELL 01 (STD.) BLCK LENS 02 WHITE 03 RED 06 YELLOW 08 GREEN 12 ORNGE 16 CLER / WT. LMP North merica Europe LMP LMP 01 6V / 30m 02 12V / 30m 03 24V / 30m 04 5V / 60m 05 6V / 40m 06 12V / 40m 07 24V / 20m LMP HOLDER FL1 FL2 DESCRIPTION Standard version. No electrical connection to module. Lamps are illuminated by applying voltage to the solder lugs of the lampholder contacts. For use only on modules with solder lugs on top face. One of the lampholder contacts is electrically linked with the module by means of a blade spring connecting the normally closed contact of the left side front changeover. Third ngle -93
11 Switches CENTRL MOUNTED ILLUMINTED BUTTON SHELL LIGHT TYPE LENS LMP HOLDER F24 FLB (F200) F25 FLC SHELL LENS 01 (STD.) BLCK 02 WHITE 05 GRY 03 RED 06 YELLOW 07 BLUE 08 GREEN 12 ORNGE 16 CLER / WT. LIGHT TYPE DESCRIPTION 01 Lamp, 6V 02 Lamp, 12V 03 Lamp, 28V 04 LED, green 05 LED, red 06 LED, yellow 07 Neon, C LMP HOLDER LZ1 DESCRIPTION Illumination dependent on button position. Button depressed, lamp on. LZ2 Illumination independent of button position. Third ngle -94
12 NUMBER OF STTIONS C00 Thru C10 CHSSIS Comes with standard (2,44mm) mounting holes NO. OF STTIONS SPCING NOTE: Single station chassis available with mounting configurations, consult factory. C&K F Series Switches SPCING 00 SINGLE STTION 10 10mm No. of Stations 2 Dim (30,02) Dim. B (36,02) Tolerance (40,01) (46,00).394 (10,0) (50,01) (60,02) (56,01) (66,01) (70,03) (76,02) (80,01) (86,00) (90,02) (96,01) (100,03) (106,02) (110,01) (116,00) mm No. of Stations 2 Dim (30,48) Dim. B (36,47) Tolerance (42,98) (48,97).492 (12,5) (55,47) (67,97) (61,47) (73,96) (80,49) (86,49) (92,99) (98,98) (105,49) (111,48) (117,98) (123,98) (130,48) (136,47) Third ngle -95
13 Switches SPCING CHSSIS NO. OF STTIONS SPCING 15 15mm No. of Stations Dim (34,90) (50,01) (65,02) (80,01) Dim. B (41,02) (56,01) (71,02) (86,00) Tolerance (15,0) (95,02) (101,02) (110,03) (116,03) (125,02) (131,01) (140,03) (146,02) (155,02) (161,01) mm No. of Stations Dim. Dim. B Tolerance (37,52) (43,51) (55,02) (61,01) (75,52) (90,02) (78.51) (96,01).689 (17,5) (107,52) (113,51) (125,02) (131,01) (142,52) (148.51) (160,02) (166,01) (177,52) (183,52) 20 20mm No. of Stations 2 Dim (40,01) Dim. B (46,00) Tolerance (60,02) (66,01) (80,01) (86,00) (100,03) (106,02).787 (20,0) (120,02) (126,01) (140,00) (146,00) (160,02) (166,01) (180,01) (186,00) (200,03) (206,02) Third ngle -96
F Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
More informationC&K NE-18 Series Mains / Power Switches
C&K NE-18 Series Features/Benefits Chassis or panel mount Various buttons and illumination Various contact configurations Typical pplications Mains/power switching Consumer electronics udio equipment Digital
More informationC&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
More information8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
More information8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More information8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
More informationTP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
More informationT Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
More informationC&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
More information7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
More informationPushbutton Product Selection Guide
Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws
More informationEP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
More informationEP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
More informationEP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
More informationC&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
More informationC&K LM Series Subminiature Precision Snap-acting Switches
Models vailable Features/enefits Sealed actuator and case meets IP65 degree of protection Compact size ideal when space is limited Long life 100,000 cycles typical Reliable snap-acting mechanism Typical
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationDistinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationSealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
More informationRockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More informationC&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
More informationT80-R Miniature Rocker and Paddle Switches Compliant
T80-R Miniature Rocker and Paddle Switches Compliant TCT DIP PUSH BUTT SLIDE ECIFICTIS MTERILS CTCT RTING: @ VC or 8 VDC ( Q terminal) CSE - diallyl phthalate ( ) ELECTRICL LIFE: 0,000 make-and-break cycles
More informationPower rocker switches
Distinctive features and specifications Protected rocker Illuminated or nonilluminated VDE (EN 08) approved Sealed to IP ELETRIL SPEIFITIONS urrrent/voltage rating : functions (ONOFF) and (ONON) : VD,
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More informationGeneral Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationC&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
More informationSPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
More informationMiniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationRoHS. Specifications. Part Number Configurator
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 48VDC Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance:
More informationT80-T Miniature Toggle Switches Compliant
T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial
More informationC&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
More informationET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
More informationET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More informationPROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
More information7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More information60 Series - General purpose relays 6-10 A. Features SERIES
60 Series - General purpose relays 6-10 60 SERIES Features 60.12 60.13 Plug-in mount 10 General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
More informationSeries WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous
RATING: AC125V 7A, AC250V 4A. CIRCUIT: DPDT. CONTACT RESISTANCE: 20m-ohms max. @ 5VDC 1A. DIELECTRIC STRENGTH: AC 1,500V for 1 min. LIFE EXPECTANCY: 6-10 cycle / min. ELECTRICAL LIFE: 6,000 cycle. OPERATING
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationY Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationC&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationKiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationSeries AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationRTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
More informationPTS645 Series 6 mm Tact Switches
PTS5 Series mm Tact Switches Features/enefits Compact size x mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation
More information9 ORDERING INFORMATION MTJ MTJ SERIES
Introduction: dam Tech MTJ series Modular Jacks are a complete line of PCB and wire leaded jacks which are UL and CS approved and meet all required FCC rules and regulations. dam Tech offers a multitude
More informationSafety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
More informationSPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
More information2 pole, 10 A power contacts 8 pin plug-in CO (DPDT) 3 CO (3PDT) Rated current/maximum peak current
0 Series - General purpose relays - 0 Features 0. 0. Plug-in mount 0 General purpose relay & pole changeover contacts Cadmium Free contacts (preferred version) C coils & DC coils UL Listing (certain relay/socket
More informationTYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
More informationTYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
More informationToggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
More information3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
More information3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features
HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts
More informationMiniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
More informationS E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
More informationIQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
More informationGeneral purpose relays 6-10 A
60 SЕRIES General purpose relays 6-10 Shipyards Hoists and cranes Road / tunnel lighting Burners, boilers and furnaces Wood-processing machines Panels for electrical distribution Control panels Control
More informationDC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
More informationROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
More informationMiniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
More informationELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More information