Pushbutton Product Selection Guide

Transcription

1

2 Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws SPDT SPST, SPDT, DPST SPST, SPDT, DPST SPDT, DPDT SPDT, DPDT, 3PDT, 4PDT SPDT SPDT, DPDT SPST SPST, SPDT Max. Current 3.5 V mp mp mp mp 4 mps 6 mps 3 mps mp Process Sealed Illuminated PCB Mount Options Thru-hole Vertical Right ngle Surface Mount Panel Mount Page No Series GP PN PHB F NE-8 Switch Type Microminiature Over Travel Ultraminiature lternate & Mom. ction Short Stroke lternate & Mom. ction Mains / Power Poles/Throws SPST SPST SPST, SPDT SPDT, DPDT, 4PDT DPDT, 4PDT DPDT, 4PDT, 6PDT, 8PDT, 0PDT DPST, DPDT Varied Max. Current 500 m mp 0.4 V 00 m 00 m 500 m 6 Process Sealed PCB Mount Options Thru-hole Vertical Right ngle Surface Mount Panel Mount Page No

3 Product Selection Guide Series Switch Type FP Ultra Miniature P Industrial PB Industrial HP Hall Effect NP Sealed Power PB Snapacting Mom. PB Miniature PS Sub-miniature Microminiature PNP Industrial Poles/Throws SPST SPST SPST Linear Output SPDT DPST DPDT 4PDT SPDT DPDT SPST SPDT Max. Current Process Sealed 0.4 V 400m IP67 400m IP67 0 m IP68 5 mp IP68 50m 0.3 / 0. / 0.3 / 0m / 3 / 5 IP68 PCB Mount Options Thru-hole Vertical Right ngle Panel Mount Wire Leads Solder Lug Surface Mount Quick Connect Page No

4 ELUM TM Series Right ngle Illuminated Latching Features/Benefits SPDT (N.O. & N.C.) Low height above PCB Reliable self-cleaning contact Surface-mount or thru-hole PCB Standard or custom actuator Central LED illumination Latching or Momentary Long travel. Smooth feel RoHS compliant and compatible Typical pplications Telecom network equipment utomotive electronics Consumer electronics Computer, server, modem, data storage Professional instrumentation, medical LED FREE COMPTIBLE OPTION Patent Numbers 6,974,94 B US EP5838B Europe Materials Operating Environment FIXED CONTCTS: Stainless steel, silver plated with gold flash TERMINLS: Stainless steel, silver plated MOVBL E CONTCTS: Copper alloy, silver plated with gold flash BSE: Glass filled LCP (UL94V-0) CTUTOR: Glass filled nylon 4/6 (UL94V-0) COVER: Stainless steel Electrical MXIMUM POWER: 3.5 V MIN./MX. VOLTGE: 0 mv 50 VDC MIN./MX. CURRENT: 0.0 m 50 m DIELECTRIC STRENGTH: 50 Vrms CONTCT RESISTNCE: 50 mω INSULTION RESISTNCE: 0 9 Ω BOUNCE TIME: ms LED SPECIFICTIONS: See page -5 Mechanical OPERTING FORCE:.5 N at Full Travel SWITCHING TRVEL:.067 (.7 mm) LTCH TRVEL:.3 (3.6 mm) FULL TRVEL:.00 (5. mm) OPERTING TEMPERTURE: -40 C TO 80 C. STORGE TEMPERTURE: -40 C TO 80 C. RELTIVE HUMIDITY: 90% 80 C. OPERTING LIFE: 30,000 Cycles. VIBRTION: Per EI 86-E Method MECHNICL SHOCK: Per EI 86-E Method. OVERLOD: Withstands 40 N for minute without damage Process Environment SOLDERBILITY: ccording to Mil STD 0F Method 08D or EI RS-86E Method 9. LED FREE PROCESS COMPTIBLE: 60 C peak, 0 seconds Max. above 50º C. WSHING PROCESS: No clean process compatible (SMT) Bottom wash compatible (Thru-hole) SHER TEST (SWITCH/PCB): > 40 N Packaging S Terminal Style SMT: Tape and reel per EI 48- (450/reel) TH Terminal Style PC: Tray (60/tray) NOTE: ny models supplied with Q, contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build--Switch To order, simply select desired option from each category and place in the appropriate box. E L U M Q Designation ELUM ELUM Series Switch Function O Momentary OC*** Momentary short travel EE Latching (push-push) Terminal Style TH Right ngle, PC thru-hole S Right ngle, surface mount Contact Material* Q Silver with gold flash * Other plating options available, please contact Customer Service. ** Custom actuators available, please contact Customer Service. *** Short travel available in momentary only. Illumination (NONE) Models without illumination LED White LED Bi-color Red (Green) 3 LED Red 5 LED mber 6 LED Green 7 LED Blue 8 LED Bi-Color mber (Green) ctuator Style** C0 Black without window C Black with window C Black with window and snap feature for custom actuators Third ngle -4

5 ELUM TM Series Right ngle Illuminated Latching ELUMEESQ7C STNDRD OPTIONS ELUMOTHQ6C SURFCE MOUNT.9 (7,4).97 (5,0).300 (7,6).00 TYP. (,53).070 TYP. (,78).040 TYP. (,0).450 (,43) PC THRU-HOLE.9 (7,4).97 (5,0).300 (7,6).00 TYP. (,53).040 TYP. (,0).450 (,43).095 DI. (,4ø).0 (3,04).80 (0,58).095 DI. (,4ø).5 (,9).80 (0,58).03 (5,6).57 (3,99).005 (0,) PCB SURFCE.84 (0,94).854 (,7).37 (6,0).57 (3,99) PCB SURFCE.068 TYP. (,73).033 TYP. (0,84) CTUTOR SHOWN EXTENDED POSITION CTUTOR SHOWN EXTENDED POSITION ELUMEESQ3C.450 (,43).00 (5,08) SURFCE MOUNT.3 DI. (3.33ø).60 (4,06).80 (0,58).84 (0,94).854 (,7).37 (6,0) CTUTOR SHOWN EXTENDED POSITION DESIGNTION E L U M ELUM ELUM SERIES, Illuminated Latching SWITCH FUNCTION POSITION POSITION SCHEMTIC OPTION CODE NO. OF POLES SWITCH FUNCTION CONNECTED TERMINLS SWITCH FUNCTION CONNECTED TERMINLS 4 NC 3 C NO O / OC SP Momentary ON 3 4 ON (Mom.) 3 SPDT 5 EE SP Latching (Push-Push) ON 3 4 ON 3 + node Cathode For SPST N.O. function, only terminals 3 & are used. For SPST N.C. function, only terminals 3 & 4 are used. Circuit: Make before break LED pins & 5 are independent of switch function. NOTE: For bi-color LED s the polarity must be reversed to alternate the color + node - Cathode 5 Third ngle -5

6 ELUM TM Series Right ngle Illuminated Latching TERMINL STYLE S RIGHT NGLE, SURFCE MOUNT.48 (0,86) 4 5 REF. SURFCE 3.74 TYP. (4,4) TH RIGHT NGLE, PC THRU-HOLE.348 (8,84) 4 REF. SURFCE 3.06 DI. TYP. (,57ø).74 TYP. (4,4).0 (,73).86 (,89).080 SQ. TYP. (,03).070 (,78) (8,74) PCB MOUNTING REF. SURFCE REF. SURFCE.0 (3,04).5 (,9).068 TYP (,73) PCB SURFCE.84 (0,94) PCB SURFCE.006 (0,5).745 (8,9) Terminal 5 = LED node Terminal 5 = LED node CONTCT MTERIL OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS Q SILVER WITH GOLD FLSH SILVER 50 m * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. FIXED CONTCTS ND TERMINLS: Stainless steel, silver plated with gold flash MOVBLE CONTCTS: Copper alloy, silver plated with gold flash NOTE: ny models supplied with Q, contact material are RoHS compliant. ILLUMINTION OPTION CODE ILLUMINTION TYPE TYPICL INTENSITY* MIN MX PEK WVELENGTH Vf Forward Voltage (mcd) (nm) 0 Model without illumination N/ N/ LED Super White 4,000 5,000 N/ 3.5 LED Bi-Color Red (Green) / LED Red 5 LED mber LED Green LED Super Blue 800, LED Bi-Color mber (Green) /565.0 *LED FORWRD CURRENT: 0 m LED FORWRD VOLTGE: see chart above LED REVERSE VOLTGE: 5.0 V MX * For information on specific and custom LED, please contact Customer Service. Third ngle -6

7 ELUM TM Series Right ngle Illuminated Latching C0 BLCK WITHOUT WINDOW.97 (5,00).57 (3,99) C BLCK WITH WINDOW.97 (5,00).095 DI. (,4ø).300 (7,6) CTUTOR STYLE* REF. SURFCE.300 (7,6) C BLCK WITH WINDOW ND SNP FETURE TO CCEPT CUSTOM CP.5 (3,8) SNP ON REF. SURFCE see cap detail.045 (,4).090 (,9) SNP DETIL.90 (4,83).080 (,03).05 (0,63).080 (,03) (0,89) (0,76).60 (4,06).00 (5,08).3 DI. (3,33ø).57 (3,99) REF. SURFCE REF. SURFCE (9,60) * Custom actuators available, please contact Customer Service. FORCE TRVEL DIGRM TPE & REEL FORCE FULL CTUTION FORCE 50g + 75g.57 (4,0).786 (9,96).079 (,0).059 DI. (,50Ø).75 (6,99) NO CTUTION N.C. 0 N.O. SWITCH LTCH FULL CTUTION TRVEL.03 (6,9) (5,37) (56,0) 0.57 (4,0) ELONGTED HOLES FEED DIRECTION B C CTUTOR POSITION O, EE CTUTOR POSITION SWITCH POINT , mm B C LTCH FULL CTUTION , mm , + 0.5mm OC CTUTOR POSITION C SWITCH POINT FULL CTUTION , mm , mm Third ngle -7

8 ELUM TM Series Right ngle Illuminated Latching Cap VILBLE HRDWRE Cap Cap PRT NO. 957C00000 High temperature black cap with universal standby symbol PRT NO. 8D0000 Paint and Laser Etched with black paint and universal standby symbol PRT NO. 8D00000 Paint and laser etched with white paint underlay and black paint with universal standby symbol. 956C0000 High temperature black cap with no symbol Material: 4/6 Nylon SMT compatible Material: Clear polycarbonate.486 (,33) Material: Clear polycarbonate.050 (,7).70 (6,86).0 (3,05).050 (,7) SNP ON REF. SURFCE.50 (3,8).040 (,0).30 (3,3) NOTE: Caps are for use with the C actuator style. Other colors and symbols available, consult Customer Service Center. CP INSTLLTION SUGGESTED END OF PC BORD.03 MX. (0,8).450 (,43).70 (6,86).486 (,33).74 8,39 REF..38 SEE PGE -6 FOR (6,05) TRVEL INFORMTION REF. SURFCE.80 (0,58).50 (3,8) PCB SURFCE VIEW WITH 957C CP INSTLLED.37 (6,0) Third ngle -8

9 EP Series Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available Typical pplications Telecommunications and networking equipment Computers and peripherals Instrumentation and controls Models vailable Specifications CONTCT RTING: B contact material: 0.4 V 0 V C or DC max. See page -3 for additional ratings. ELECTRICL LIFE: EP, EP models: 60,000 make-and-break cycles at full load. EP models: 30,000 cycles. CONTCT RESISTNCE: Below 0 mω9 typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω9 min. DIELECTRIC STRENGTH: 000 Vrms sea level. OPERTING TEMPERTURE: 30º9C to 859ºC. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. PCKGING: Surface mount switches standard in anti-static tape and reel packaging per EI 48-3, see page -4 for drawings and reel information. Tape and cover strip are conductive for use near statically sensitive components, consult Customer Service Center. Materials CSE & BUSHING: High temperature material, glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0) on EP / EP models; glass filled nylon 6/6 on EP. PLUNGER: Thermoplastic polyester or glass filled nylon (UL 94V-0), with internal o-ring seal. S surface mount: High temperature material, glass filled LCP (UL 94V-0). SWITCH SUPPORT: Brass, matte-tin plated. CONTCTS & TERMINLS: B contact material: Copper alloy, with gold plate over nickel plate. See page -3 for additional contact materials. TERMINL SEL: Epoxy. NOTE: ny models supplied with Q, B, P, S, R or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. CUTION: PC mounting layouts and pads as shown are designed to be compatible with the latest equipment and reflow techniques. Care should be taken in the design and location of PC lands to suit individual needs. Orientation relative to reflow direction may significantly impact solder joint integrity. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -0 thru -4. For additional options not shown in catalog, consult Customer Service Center. ll models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function EP SPST Off-Mom. EP SPDT On-Mom. EP DPST Off-Mom. Plunger S.5 high S.0 high S.465 high FP Flush R Snap-fitting,.5 high Bushing D Unthreaded Terminations Right angle, PC thru-hole C PC Thru-hole V Vertical right angle, PC thru-hole V3 Vertical right angle, snap-in, PC thru-hole S Right angle, surface mount S Right angle, surface mount rear facing V3 Vertical mount, v-bracket V3 Vertical mount, v-bracket, snap-in (EP & EP only) W Wire wrap Contact Material B Gold P Gold, matte-tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte tin Seal E Epoxy -9

10 EP Series Sealed Tiny Switches SWITCH FUNCTION NO. POLES SP EP MODEL NO. SWITCH FUNCTION POS. POS. C&K marking on opposite side OFF MOM. CONNECTED TERMINLS POS. POS. C&K marking on opposite side OPEN -3 SPST SCHEMTIC EP ON MOM SPDT SPDT Omit terminal for EP models. Part number shown: EPSDCBE Terminal Nos. For Reference Only DP EP OFF MOM. OPEN -3,4-6 DPST DPST Terminal Nos. For Reference Only Part number shown: EPSDCBE MOM. = Momentary ll models with all options when ordered with G, Q, R or S contact material. PLUNGER S.5 HIGH S.0 HIGH S.465 HIGH FP FLUSH PLUNGER R SNP-FITTING S& S actuators are not available with EP & EP models. FP & R actuators are not available with EP model. NOTE: Caps available for plunger options, see page -4. BUSHING D UNTHREDED NOTE: Internal actuator o-ring standard. Third ngle -0

11 EP Series Sealed Tiny Switches TERMINTIONS C PC THRU-HOLE SP DP W WIRE WRP SP DP PC MOUNTING EP - Omit center hole. SP and DP SP and DP RIGHT NGLE, PC THRU-HOLE PC MOUNTING EP Models: omit terminal. EP Models: omit thru-hole. EPSDBE SPDT RIGHT NGLE, PC THRU-HOLE PC MOUNTING EPSDBE DPST V VERTICL RIGHT NGLE, PC THRU-HOLE PC MOUNTING EPSDVBE SPDT NOTE: Terminal bend radii and lead-in manufacturing option. EP Models: omit terminal. EP Models: omit hole. Third ngle -

12 EP Series Sealed Tiny Switches V VERTICL RIGHT NGLE, THRU-HOLE TERMINTIONS PC MOUNTING EPSDVBE DPST NOTE: Terminal bend radii and lead-in manufacturing option. V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE PC MOUNTING EPSDV3BE SPST EP Models: omit hole. S RIGHT NGLE, SURFCE MOUNT PC MOUNTING.30 (8,3) EPSDSPE SPDT vailable with P contact material only. Not vailable on DPST models..40 MX (0,4) EP Models: omit terminal. EP Models: omit pad. S RIGHT NGLE, SURFCE MOUNT PC MOUNTING EPSDSBE SPDT.76 (7,0).04 (,04) S is only available with B and P contact materials. Not vailable on DPST models..00 TYP (0,5) EPOXY SEL.400 (0,6).059 (,50).8 (4,60).05 (,30). (3,07).7 (5,5).34 (5,94).00 (,54).0 (5,60).60 (4,06).30 (8,3).00 (5,08).7 (6,90).33 (7,95) YY/WW 0.4V MX TERMINL NOS..03 TYP. 3 FOR REF. ONLY (0,80).00 (5,08).059 (,50).07 TYP. (,80).08 TYP. (,0).00 (,54) Third ngle -

13 EP Series Sealed Tiny Switches V3 VERTICL MOUNT, V-BRCKET V3 VERTICL MOUNT, V-BRCKET, SNP-IN TERMINTIONS PC MOUNTING V3 SNP-IN EP Models: o e e ole EPSDV3BE SPDT EP Models: omit terminal. V3 VERTICL MOUNT, V-BRCKET PC MOUNTING EPSDV3BE DPST CONTCT MTERIL OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS B P GOLD GOLD MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT 0.4 V 0 V C OR DC MX. Q S SILVER 4,5 SILVER 5 MTTE-TIN 6 POWER 0 V C OR 8 V DC. G R GOLD OVER SILVER,3 GOLD 3 MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT OR POWER 0.4 V 0 V C OR DC MX. OR 0 V C OR 8 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. END CONTCTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CONTCTS: Coin silver, silver plated. 5 CENTER CONTCT & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with matte tin over nickel plate. NOTE: ny models supplied with Q, B P, S,R or G contact material are RoHS compliant. ll models with all options when ordered with G, S, R or Q contact material. SEL E EPOXY SEL Third ngle -3

14 EP Series Sealed Tiny Switches Cap.00 DI. (5,08Ø) 00 (,5 ).55 (3,94) Cap.30 DI. (7,87Ø).080 (,03) VILBLE HRDWRE (,8 ) Cap Compatible with snap-fitting plungers EP & EP Models. R option only. Cap Compatible with snap-fitting plungers EP & EP Models. R option only. PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss Not for use on S plunger Material: Nylon Finish: Gloss Not for use on S plunger Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss NOTE: Other colors available, consult Customer Service Center. TPE & REEL For part number EPXX-S/S REEL INFORMTION OUTSIDE DIMETER 3.00 (330,0) PILOT HOLE.5 (3,0) QUNTITY PER REEL 600 EPSDISPE EPFPDISPE Third ngle -4

15 TP Series Tiny Switches Features/Benefits Subminiature size capable of switching MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible with bottom wash cleaning RoHS compliant models available Typical pplications Telecommunications and networking equipment Computers and peripherals Instrumentation and controls Models vailable Specifications Materials CONTCT RTING: B contact material: 0.4 V CSE: Glass filled nylon 4/6 or 6/6, flame retardant, heat stabilized 0 V C or DC max. Q contact material: or diallyl phthalate (DP), (UL 94V-0). 0 V C or 8 V DC. See page -9 for additional ratings. PLUNGER: Thermoplastic polyester (UL 94V-0). ELECTRICL LIFE: TP, TP MODELS: 60,000 make-and-break CP & FRME: Nylon, black standard. cycles at full load. TP MODELS: 30,000 cycles. BUSHING: Brass, nickel plated. CONTCT RESISTNCE: Below 0 mω5 typ. -4 V DC, 00 m, for both silver and gold plated contacts. HOUSING: Stainless steel. INSULTION RESISTNCE: 0 9 Ω 5min. SWITCH SUPPORT: Brass, matte-tin plated. DIELECTRIC STRENGTH: 000 Vrms sea level. END CONTCTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. OPERTING TEMPERTURE: 30º5C to 85º5C. See page -9 for additional contact materials. SOLDERBILITY: Per MIL-STD-0F method 08D, or CENTER CONTCT & LL TERMINLS: B contact material: Copper EI RS-86E method 9 ( hour steam aging). alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page -9 for additional NOTE: ny models supplied with Q, B, P, R or G contact material are RoHS compliant. contact materials. NOTE: Specifications and materials listed above are for switches with standard options. TERMINL SEL: Epoxy. Refer to soldering and cleaning in For information on specific and custom switches, consult Customer Service Center. Technical Data Chapter HRDWRE: Nut & Locking Ring: Brass nickel plated. Lockwasher: Steel, nickel plated. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -6 thru -0. For additional options not shown in catalog, consult Customer Service Center. ll models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods. Switch Function TP SPST Off-Mom. TP SPDT On-Mom. TP DPST Off-Mom. ctuator or Bushing SH.55 high plunger, threaded,.0 high bushing, flat SH8.55 high plunger, unthreaded,.0 high bushing, round SH9.55 high plunger, unthreaded,.0 high bushing, flat J8 LT LT9 Snap-in with frame.5 high plunger, threaded,.30 high bushing, flat.5 high plunger, unthreaded,.30 high bushing, flat MS9.30 high plunger,.00 high bushing, round Terminations Right angle, PC thru-hole C PC Thru-hole Z Solder lug V Vertical right angle, PC thru-hole V3 Vertical mount, v-bracket W Wire wrap Contact Material B Gold P Gold, matte-tin Q Silver G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Cap Color Black NONE Models with no cap White Frame Color Black NONE Models with no frame -5

16 TP Series Tiny Switches SWITCH FUNCTION NO. POLES SP MODEL NO. TP SWITCH FUNCTION POS. POS. C&K marking on opposite side OFF MOM. CONNECTED TERMINLS POS. POS. C&K marking on opposite side OPEN -3 SPST SCHEMTIC TP ON MOM SPDT SPDT Omit terminal for TP models. Part number shown: TPSHZQE Terminal Nos. For Reference Only DP TP OFF MOM. OPEN -3,4-6 DPST DPST Terminal Nos. For Reference Only Part number shown: TPSHZQE MOM. = Momentary ll models with all options when ordered with G, Q or R contact material. CTUTOR SNP-IN FRONT MOUNT CTUTOR OR BUSHING CP COLOR FRME COLOR J8 SNP-IN WITH FRME PNEL MOUNTING OPTION CODE BLCK WHITE CP COLOR OPTION CODE FRME COLOR BLCK NONE No Frame Color (J80 option) Cap and Frame Finish: matte. Other colors available, consult Customer Service Center. NOTE: vailable with Z, C, or W terminations. NOTE: Caps & frames available separately, see page -0. Third ngle -6

17 TP Series Tiny Switches BUSHING CTUTOR OR BUSHING SH.55 HIGH PLUNGER,.0 HIGH BUSHING, THREDED, FLT SH8.55 HIGH PLUNGER,.0 HIGH BUSHING, UNTHREDED SH9.55 HIGH PLUNGER,.0 HIGH BUSHING, UNTHREDED, FLT LT.57 HIGH PLUNGER,.30 HIGH BUSHING, THREDED LT9.5 7 HIGH PLUNGER,.30 HIGH BUSHING, UNTHREDED MS9.30 HIGH PLUNGER Standard with Z, C, W terminations. Standard with, V, V3 terminations. Not available with Z terminations. Subtract.06 (0,4) for models with, V or V3 terminations. NOTE: Caps available for plunger options, see page -0. PNEL MOUNTING 0-48 BUSHING /4 IN. BUSHING Without locking ring With standard locking ring Without locking ring With standard locking ring NOTE: One mounting nut, locking ring and lockwasher supplied standard with 0-48 threaded bushings (two nuts with /4-40 bushings). Optional mounting nut and locking ring styles and finishes available separately, see section Technical Data and dditional Hardware. TERMINTIONS C PC THRU-HOLE Z SOLDER LUG W WIRE WRP SP DP SP DP SP DP PC MOUNTING Omit center holes for TP models Not available with MS9 bushing or P or R contact material. Third ngle -7

18 TP Series Tiny Switches RIGHT NGLE, PC THRU-HOLE TERMINTIONS PC MOUNTING TPSH9BE SPDT TP Models: omit terminal. TP Models: omit hole. RIGHT NGLE, PC THRU-HOLE PC MOUNTING TPSH9BE DPST V VERTICL RIGHT NGLE, PC THRU-HOLE PC MOUNTING TPSH9VBE SPDT TP Models: omit hole. NOTE: Terminal bend radii and lead-in manufacturing option. TP Models: omit terminal. V VERTICL RIGHT NGLE, PC THRU-HOLE PC MOUNTING TPSH9VBE DPST NOTE: Terminal bend radii and lead-in manufacturing option. Third ngle -8

19 TP Series Tiny Switches V3 VERTICL MOUNT, V-BRCKET TERMINTIONS PC MOUNTING TP Models: omit terminal. TP Models: omit hole. TPSH9V3BE SPDT V3 VERTICL MOUNT, V-BRCKET PC MOUNTING TPSH9V3BE DPST CONTCT MTERIL OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS B P GOLD GOLD MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT 0.4 V 0 V C OR DC MX. Q SILVER 4,5 SILVER 5 POWER 0 V C OR 8 V DC. G R GOLD OVER SILVER,3 GOLD 3 MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT OR POWER 0.4 V 0 V C OR DC MX. OR 0 V C OR 8 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. END CONTCTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CONTCTS: Coin silver, silver plated. 5 CENTER CONTCT & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with matte-tin over nickel plate. NOTE: ny models supplied with P, R, Q, B or G contact material are RoHS compliant. ll models with all options when ordered with R, G, or Q contact material. B contact material standard with, V, V3 & W terminations. Q contact material standard with C & Z terminations P, R contact materials not available with Z terminations. SEL E EPOXY SEL Third ngle -9

20 TP Series Tiny Switches Cap,.00 DI. Plungers PRT NO WHITE BLCK VILBLE HRDWRE Cap,.00 DI. Plungers (Recommended for S9 plunger) PRT NO WHITE BLCK Cap,.00 DI. Plungers PRT NO WHITE BLCK Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Cap,.0 DI. Plungers PRT NO WHITE BLCK Material: Nylon Finish: Gloss Cap,.0 DI. Plungers.000 MX. DRFT (.30 ).090 CVITY ID.30 6X 45 X.00 CHMFER OR.00 R. LED IN PRT NO. 89D0000 WHITE 89D0000 BLCK Material: Nylon Finish: Gloss R.05 R ± P TUNNEL GTE S CLOSE S POSSIBLE TO THIS SURFCE. NOTE: dditional nuts, locking rings and lockwashers available separately, see section Technical Data and dditional Hardware. Other cap colors available, consult Customer Service Center. Cap, J8 option only PRT NO WHITE BLCK Material: Nylon Finish: Gloss PRT NO WHITE BLCK Material: Nylon Finish: Matte Frames snap into panel opening and are independent from switch mounting. ccurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. vailable in two basic styles and four panel thicknesses in. Material: Nylon. Finish: Matte. TYPICL PPLICTION.090 (,9) PNEL THK. PRT NO (3,8) PNEL THK. PRT NO BLCK For part numbers , PNEL MOUNTING For part numbers , R. (0,3) MX. TYP..495 ±.505 (,57 ±,83).005 R. (0,3) MX. TYP..495 ±.505 (,57 ±,83).595 ±.605 (5, ± 5,37).60 ±.65 (5,75 ± 5,88) Panel Inserts bove frames (part nos. 43XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PNEL INSERT WITH HOLE FOR LED PRT NO BLNK PNEL INSERT WITHOUT HOLE FOR LED PRT NO BLCK Third ngle -0

21 E00 Series Sealed Snap-acting Momentary Switches Features/Benefits Process sealed with disposable splashproof boot Long life contact design Snap-fitting plunger available RoHS compliant models available Typical pplications Instrumentation Telecommunications and networking equipment Computers and peripherals Models vailable Specifications Materials CONTCT RTING: B contact material (EX5 Models): 0.4 V max. CSE & BUSHING: Glass filled nylon 6/6, flame 0 V C or DC max. G contact material (EX Models): MP (UL V C or 8 V DC or 0.4 V 0 V C or DC max. PLUNGER: Glass filled nylon or glass filled polyester (PBT) Note: Break-before-make contacts. Multi-pole contacts (UL 94V-0). do not make and break simultaneously. See page -6 for additional ratings. SWITCH SUPPORT: Brass or steel, matte-tin. ELECTRICL LIFE: 60,000 make-and-break cycles at full load. SWITCH SUPPORT RETINER: Stainless steel. CONTCT RESISTNCE: Below 50 mω typ. N.O. & N.C. CONTCTS: EX5 MODELS: B contact material: Copper 4 V DC, 00 m, for both silver and gold plated contacts. alloy, with gold plate over nickel plate. EX MODELS: G contact INSULTION RESISTNCE: 0 9 material: Coin silver, with gold plate over nickel plate. See page Ω min. -6 for additional contact materials. DIELECTRIC STRENGTH: 000 Vrms sea level. COMMON CONTCTS & LL TERMINLS: Copper alloy, with OPERTING TEMPERTURE: 30ºC to 75ºC. gold plate over nickel plate. See page -6 for additional CP INSTLLTION FORCE: 0 lbs. max. permissible. contact materials. SOLDERBILITY: Per MIL-STD-0F method 08D, or TERMINL SEL: Epoxy. EI RS-86E method 9 ( hour steam aging). DISPOSBLE BOOT: Vinyl splashproof boot supplied standard. Remove and discard only after soldering and cleaning NOTE: ny models supplied with P, R, B or G contact material are RoHS compliant. processes are complete. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages - thru -8. For additional options not shown in catalog, consult our Customer Service Center. ll models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E SPDT On-Mom. mp E DPDT On-Mom. mp E5 SPDT On-Mom. 0.4V E5 DPDT On-Mom. 0.4V Plunger S.8 high M.33 high, snap-fitting S.33 high Bushing D Unthreaded D3.80 high, unthreaded Terminations Right angle, PC thru-hole V Vertical right angle, PC thru-hole C PC Thru-hole 3 Right angle, snap-in, PC thru-hole V3 Vertical right angle, snap-in, PC thru-hole V3.460 high, V-bracket V4.630 high, V-bracket V6.460 high, V-bracket V8.953 high, V-bracket V3.460 high, snap-in V-bracket V4.630 high, snap-in V-bracket V6.460 high, snap-in V-bracket - Contact Material B Gold G Gold over silver P Gold, matte-tin R Gold over silver, matte-tin Seal E Epoxy and disposable splashproof boot

22 E00 Series Sealed Snap-acting Momentary Switches SWITCH FUNCTION NO. POLES SP E E5 MODEL NO. SWITCH FUNCTION POS. POS. C&K marking this side ON MOM. ON MOM. CONNECTED TERMINLS POS. POS. C&K marking this side -3 - SPDT SCHEMTIC SPDT Part number shown: ESDCGE Terminal Nos. For Reference Only DP E E5 ON ON MOM. MOM. -3,4-6 -,4-5 DPDT DPDT Part number shown: ESDCBE MOM. = Momentary E, E models with all options when ordered with G or R contact material. Terminal Nos. For Reference Only EX5 models must be ordered with B or P contact material. EX models must be ordered with G or R contact material. PLUNGER S.8 HIGH S.33 HIGH M.33 HIGH SNP-FITTING Not vailable with D bushing. NOTE: Caps available for all plunger options, see page -7. BUSHING D UNTHREDED D3.80 HIGH UNTHREDED Not available with S actuator. NOTE: Disposable splashproof vinyl over actuator and bushing supplied std., see page -6. Third ngle -

23 E00 Series Sealed Snap-acting Momentary Switches C PC THRU-HOLE TERMINTIONS PC MOUNTING SPDT and DPDT RIGHT NGLE, PC THRU-HOLE SECTION - ESDGE SPDT 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. RIGHT NGLE, PC THRU-HOLE SECTION - ESDGE DPDT 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. Third ngle -3

24 E00 Series Sealed Snap-acting Momentary Switches V VERTICL RIGHT NGLE, PC THRU-HOLE,.50 PITCH TERMINTIONS ESDVGE SPDT SECTION - V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50 PITCH PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. V VERTICL RIGHT NGLE, PC THRU-HOLE,.50 PITCH ESDVGE DPDT SECTION - V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50 PITCH PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. Third ngle -4

25 E00 Series Sealed Snap-acting Momentary Switches V3, V4 VERTICL MOUNT, V-BRCKET V3, V4 VERTICL MOUNT, V-BRCKET, SNP-IN TERMINTIONS PC MOUNTING Dim '' ESD3 GE SPDT SNP-IN OPTION CODE DIM V3, V3.460 (,68) V4, V4.630 (6,00) V3, V4 VERTICL MOUNT, V-BRCKET V3, V4 VERTICL MOUNT, V-BRCKET, SNP-IN PC MOUNTING Dim '' ESD3 GE DPDT SNP-IN OPTION CODE DIM V3, V3.460 (,68) V4, V4.630 (6,00) V6, V8 VERTICL MOUNT, V-BRCKET V6, V8 VERTICL MOUNT, V-BRCKET, SNP-IN.9 (4,88). DI. PC MOUNTING.80 (4,57) C&K MRKING ON OPPOSITE SIDE DIM.060 MX. (,53) ESD3 GE SPDT.00 TYP. (0,5).85 TYP. (4,70) C NO 3 NC.750 (9,05).030 X.050 TYP. (0,76) (,7).050 (,7).360 (9,4).50 (6,35).85 (4,70) OPTION CODE DIM V6, V6.460 (,68) V8, V8.953 (4,) Third ngle -5

26 E00 Series Sealed Snap-acting Momentary Switches V6, V8 VERTICL MOUNT, V-BRCKET V6, V8 VERTICL MOUNT, V-BRCKET, SNP-IN TERMINTIONS PC MOUNTING Dim '' SNP-IN ESD3V6GE DPDT OPTION CODE DIM V6, V6.460 (,68) V8, V8.953 (4,) CONTCT MTERIL OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS B P GOLD GOLD MTTE-TIN 4 LOW LEVEL/DRY CIRCUIT EX5 MODELS ONLY: 0.4 V 0 V C OR DC MX. G R GOLD OVER SILVER,3 GOLD 3 MTTE-TIN 4 LOW LEVEL/DRY CIRCUIT OR POWER EX MODELS ONLY: 0.4 V 0 V C OR DC MX. OR 0 V C OR 8 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. N.O. ND N.C. CONTCTS: Coin silver, with gold plate over nickel plate. 3 COMMON CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 TERMINLS: Copper alloy, with matte-tin alloy over nickel plate. NOTE: ny models supplied with P, R, B or G contact material are RoHS compliant. E, E models with all options when ordered with mandatory G, or R contact material. P or B contact material must be ordered with EX5 models. R or G contact material must be ordered with EX models. SEL E EPOXY SEL ND DISPOSBLE SPLSHPROOF BOOT Disposable splashproof boot supplied standard. Remove and discard boot only after soldering and cleaning processes are complete. Third ngle -6

27 E00 Series Sealed Snap-acting Momentary Switches Cap VILBLE HRDWRE Cap Cap.0 (3,05).55 (3,94).00 DI. (5,08 ) PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Cap, Snap-fitting plunger Cap, Snap-fitting plunger Cap PRT NO. 45D0000 WHITE 45D0000 BLCK 45D03000 RED PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Matte NOTE: Other cap colors available, consult Customer Service Center. Frames snap into panel opening and are independent from switch mounting. ccurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. vailable in two basic styles and four panel thicknesses in. Material: Nylon. Finish: Matte. TYPICL PPLICTION.090 (,9) PNEL THK. PRT NO (3,8) PNEL THK. PRT NO BLCK Third ngle -7

28 E00 Series Sealed Snap-acting Momentary Switches PNEL INSERTS VILBLE HRDWRE bove frames (part nos. 43XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PNEL INSERT WITH HOLE FOR LED BLNK PNEL INSERT WITHOUT HOLE FOR LED PRT NO PRT NO BLCK Special colors, custom markings available, consult Customer Service Center. Third ngle -8

29 800 Series Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computer peripherals Telecommunications equipment Models vailable Specifications CONTCT RTING: B contact material (8X5 Models): 0.4 V 0 V C or DC maximum. G contact material (8X, U8X Models): 0 V C or 8 V DC or 0.4 V 0 V C or DC max. Note: Break-before-makecontacts. Multi-pole contacts do not make and break simultaneously. See page -43 for additional ratings. ELECTRICL LIFE: 60,000 make-and-break cycles at full load. CONTCT RESISTNCE: Below 50 mω typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH:,000 Vrms sea level. OPERTING TEMPERTURE: 8XX MODELS: 30ºC to 75ºC. U8X MODELS: 30ºC to 65ºC. CP INSTLLTION FORCE: 0 lbs. max. permissible. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). NOTE: ny models supplied with B, P, R, or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CSE: Glass filled nylon 6/6 or diallyl phthalate (DP), flame retardant (UL 94V-0). PLUNGER: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0). CP & FRME: Nylon, black, standard. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. N.O. & N.C. CONTCTS: 8X, U8X MODELS: G contact material: Coin silver, with gold plate over nickel plate. See page -43 for additional contact materials. 8X5 MODELS: B contact material: Copper alloy, with gold plate over nickel plate. See page -43 for additional contact materials. COMMON CONTCT & LL TERMINLS: Copper alloy, with gold plate over nickel plate. TERMINL SEL: Epoxy. Refer to soldering and cleaning Technical Data Chapter. HRDWRE: Nut & Locking Ring: Brass, nickel plated; Lockwasher: Steel, nickel plated. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -30 thru -45. For additional options not shown in catalog, consult Customer Service Center. ll models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods. Switch Function 8 SPDT On-Mom. mp 85 SPDT On-Mom. 0.4V 8 DPDT On-Mom. mp 85 DPDT On-Mom. 0.4V 83 3PDT On-Mom. mp 835 3PDT On-Mom. 0.4V 84 4PDT On-Mom. mp 845 4PDT On-Mom. 0.4V Note: UL models available, see page -30 and -3. ctuator or Plunger S Plunger NONE Snap-in J80 Snap-in J8 Snap-in w/frame J8 Snap-in w/frame for LED J83 Snap-in w/frame & flush cap J84 Snap-in w/frame for LED, flush cap J85 Snap-in w/frame & LED J95 PC w/v-bracket & LED L Plunger M Snap-fitting plunger Terminations Right angle, PC thru-hole V Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug Right angle, PC thru-hole 3 Right angle, snap-in, PC thru-hole Bushing D9.80 high, keyway H.50 high, flat NONE No bushing choice required D.80 high, keyway D.88 high, flat D3.80 high D8.88 high, flat H9.50 high, flat, hi torque Y.350 high, keyway Y3 6.35mm high, keyway, hi torque Y4.378 high, flat, hi torque Y9.350 high, keyway 4 Right angle, PC thru-hole, reversed terminals 6 Right angle, PC thru-hole V Vertical right angle, PC thru-hole V3 Vertical right angle, snap-in, PC thru-hole R Right angle with PCB R Right angle with PCB, reversed terminals -9 Contact Material B Gold P Gold, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy I Epoxy potted base Cap Color Black NONE Models without caps White 3 Red V.555 high, V-bracket V3.460 high, V-bracket V4.630 high, V-bracket V6.460 high, V-bracket V7.630 high, V-bracket V8.953 high, V-bracket V9.50 high, V-bracket 4 Orange 5 Yellow 6 Green 7 Blue 9 Gray Frame Color Black NONE Models without frame White 3 Red 5 Yellow 6 Green 9 Gray LED Color 3 Red NONE Models without LED 5 Yellow 6 Green V3.460 high, snap-in V-bracket V6.460 high, snap-in V-bracket W.750 long, wire wrap W.964 long, wire wrap W3.45 long, wire wrap W4.06 long, wire wrap Z3 Quick connect

30 800 Series Snap-acting Momentary Switches SWITCH FUNCTION NO. POLES SP MODEL NO UL/CS* MODEL NO. U8 SWITCH FUNCTION POS. POS. C&K marking on opposite side ON ON MOM. MOM. CONNECTED TERMINLS POS. POS. -3 C&K marking on opposite side - SPDT SCHEMTIC SPDT Part number shown: 8SHZGE Terminal Nos. For Reference Only DP 8 85 U8 ON ON MOM. MOM. -3,4-6 -,4-5 DPDT DPDT Part number shown: 8SHZGE Terminal Nos. For Reference Only 3P U83 ON ON MOM. MOM. -3,4-6,7-9 -,4-5,7-8 3PDT 3PDT Part number shown: 83SHZGE MOM. = Momentary *U8 thru U84 model numbers with all options (except R, R terminations) when ordered with G or R contact material. Terminal Nos. For Reference Only 8X5 models must be ordered with B or P contact material. 8X and U8X models must be ordered with G or R contact material. Third ngle -30

31 800 Series Snap-acting Momentary Switches SWITCH FUNCTION NO. POLES 4P MODEL NO UL/CS* MODEL NO. U84 SWITCH FUNCTION POS. POS. C&K marking on opposite side ON ON MOM. MOM. CONNECTED TERMINLS POS. POS. -3,4-6,7-9,0- C&K marking on opposite side -,4-5,7-8,0-4PDT SCHEMTIC 4PDT Part number shown: 84SHZGE MOM. = Momentary * U8 thru U84 model numbers with all options (except R, R terminations) when ordered with G or R contact material. Terminal Nos. For Reference Only 8X5 models must be ordered with B or P contact material. 8X and U8X models must be ordered with G or R contact material. CTUTOR SNP-IN FRONT MOUNT CTUTOR OR PLUNGER CP COLOR FRME COLOR J80 SNP-IN PNEL MOUNTING OPTION CODE CP ND FRME COLOR ** BLCK NONE No Frame Color (J80 option) WHITE 3 RED 4 ORNGE 5 YELLOW 6 GREEN NOTE: No frame color choice required. ** Increase this dim. to.60/.65 (5,75/5,88) for.09/.5 (,3/3,8) thk. panels. J8 SNP-IN WITH FRME 7 BLUE 9 GRY PNEL MOUNTING Other colors available, consult Customer Service Center. Cap and Frame Finish: matte. NOTE: Caps and frames available separately, see pages -44 and -45. ** NOTE: vailable with C, W-W4, Z or Z3 terminations and SPDT and DPDT models only. ** Increase this dim. to.60/.65 (5,75/5,88) for.09/.5 (,3/3,8) thk. panels. Third ngle -3

32 800 Series Snap-acting Momentary Switches CTUTOR SNP-IN FRONT MOUNT CTUTOR OR PLUNGER CP COLOR FRME COLOR J83 SNP-IN WITH FRME ND FLUSH CP ** PNEL MOUNTING J8 SNP-IN WITH FRME FOR LED LED not included. For LED information, see page -45. J84 SNP-IN WITH FRME FOR LED, FLUSH CP LED not included. For LED information, see page -45. OPTION CODE CP ND FRME COLOR BLCK WHITE 3 RED 4 ORNGE 5 YELLOW 6 GREEN 7 BLUE 9 GRY Other colors available, consult Customer Service Center. Cap and Frame Finish: matte. vailable with C, W-W4, Z or Z3 terminations and SPDT and DPDT models only. NOTE: Caps and frames available separately, see pages -44 and -45. Third ngle -3

33 800 Series Snap-acting Momentary Switches CTUTOR SNP-IN FRONT MOUNT J85 SNP-IN WITH FRME ND LED CTUTOR OR PLUNGER PNEL MOUNTING * CP COLOR LED COLOR FRME COLOR * Increase this dim. to.60/.65 (5,75/5,88) for.09/.5 (,3/3,8) thk. panels. 8J85ZGE3 SPST vailable with C, W-W4, Z or Z3 terminations and SPDT models only. For LED information see page -45. NOTE: Caps & frames available separately, see pages -44 and -45. OPTION CODE BLCK WHITE 3 RED CP ND FRME COLOR 4 ORNGE 5 YELLOW 6 GREEN 7 BLUE 9 GRY OPTION CODE LED COLOR 3 RED 5 YELLOW 6 GREEN For LED information see page -45. CTUTOR PC MOUNT CTUTOR OR PLUNGER CP COLOR LED COLOR J95 PC WITH V-BRCKET ND LED PC MOUNTING OPTION CODE NOTE: Caps available separately, see page -44. vailable with V3 terminations and SPDT models only. BLCK WHITE 3 RED CP ND FRME COLOR 4 ORNGE 5 YELLOW 6 GREEN 7 BLUE 9 GRY OPTION CODE LED COLOR 3 RED 5 YELLOW 6 GREEN For LED information see page J95V3GE3 SPST Third ngle -33

34 800 Series Snap-acting Momentary Switches S PLUNGER NONE NO PLUNGER CHOICE REQUIRED (JXX CTUTORS) PLUNGER VILBLE BUSHINGS CTUTOR OR PLUNGER DIM. FOR C, W-W4, Z & Z3 TERMINTIONS DIM. FOR,, 3, 4, 6, V-3, R & R TERMINTIONS DIM. FOR V3-V6 TERMINTIONS D, D9.44 (6,0).8 (5,79).4 (5,69) H, H9.8 (5,54).0 (5,3).98 (5,03) Y, Y9.03 (5,6).87 (4,75).83 (4,65) Y3 (5,54) (5,3) (5,03) Y4.85 (4,70).69 (4,9).65 (4,9) D, D8 N/.3 (5,89).8 (5,79) D3 N/.6 (4,).58 (4,0) L PLUNGER VILBLE BUSHINGS DIM. B FOR C, W-W4, Z & Z3 TERMINTIONS DIM. B FOR,, 3, 4, 6, V-3, R & R TERMINTIONS DIM. B FOR V3-V6 TERMINTIONS Y, Y9.78 (4,5).6 (4,).58 (4,0) Y4.090 (,9).074 (,88).070 (,78) M SNP-FITTING PLUNGER VILBLE BUSHINGS DIM. C FOR C, W-W4, Z & Z3 TERMINTIONS DIM. C FOR,, 3, 4, 6, V-3, R & R TERMINTIONS DIM. C FOR V3-V6 TERMINTIONS D, D9.97 (7,54).8 (7,4).77 (7,04) H, H9.67 (6,78).5 (6,38).47 (6,7) Y, Y9.59 (6,58).43 (6,7).39 (6,07) Y3 (6,78) (6,37) (6,7) Y4.59 (6,58).43 (6,7).39 (6,07) D, D8 N/.73 (6,93).69 (6,83) D3 N/.36 (9,7).357 (9,07) N/ = NOT VILBLE NOTE: When selecting plunger option, bushing selection must also be made, see next page. No plunger option is required when any JXX actuator option is selected. dditional plunger lengths are available on SPDT and DPDT models, consult Customer Service Center. Not all plunger lengths sufficient for use with caps, see page -44. BUSHING NONE NO BUSHING CHOICE REQUIRED (JXX CTUTORS) D.80 HIGH THREDED, KEYWY D HIGH UNTHREDED, KEYWY H HIGH THREDED, FLT H HIGH UNTHREDED, FLT Y.350 HIGH THREDED, KEYWY Y9.350 HIGH UNTHREDED, KEYWY /4-40 UNS- D9 bushing standard with -6, R, R V-V3 terminations. H bushing standard with C, W-W4, Z or Z3 terminations. H, H9 bushings not available on single pole models with 3-6, R, R terminations. Will withstand in./lbs. of torque with no distortion. Third ngle -34

35 800 Series Snap-acting Momentary Switches BUSHING Y3 6.35mm THREDED, KEYWY Y4.378 HIGH THREDED, FLT D.88 HIGH THREDED, FLT D8.88 HIGH UNTHREDED, FLT D3.80 HIGH UNTHREDED /4-40 UNS- Y3 & Y4 bushings not available on single pole models with 3-6, R, R terminations. Will withstand in./lbs. of torque with no distortion. D, D8 bushings not available with C, W-W4, Z, Z3 terminations. NOTE: No bushing option choice required when JXX actuator option is selected. When selecting bushing option, plunger selection must also be made, see previous page. Plunger lengths vary with bushing and termination options selected. D3 bushing available with,, 3, V, V, V3 and V-V6 terminations only. NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Optional mounting nut and locking ring styles available, see section Technical Data and dditional Hardware. TERMINTIONS Z SOLDER LUG C PC THRU-HOLE PC MOUNTING SPDT thru 4PDT Not available with J95 actuator, P or R contact material. SPDT thru 4PDT Not available with J95 actuator option. Z3 QUICK CONNECT W W, W3, W4 WIRE WRP OPTION CODE DIM W.750 (9,05) DIM `' W.964 (4,49) W3.45 (0,80) W4.06 (6,97) SPDT thru 4PDT Not available with J95 actuator, P or R contact material. Mating quick connector available, order part number , page -44. SPDT thru 4PDT Not available with J95 actuator option. Third ngle -35

36 800 Series Snap-acting Momentary Switches RIGHT NGLE, PC THRU-HOLE 8SD9GE SPDT TERMINTIONS.38 (3,5) 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE PC MOUNTING Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option. RIGHT NGLE, PC THRU-HOLE 8SD9GE DPDT SECTION - 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE PC MOUNTING Not available with JXX actuators and I seal option. Terminal bend radii and lead-in manufacturing option. Third ngle -36

37 800 Series Snap-acting Momentary Switches RIGHT NGLE, PC THRU-HOLE TERMINTIONS PC MOUNTING 83SD9GE 3PDT SECTION - Not available with JXX actuators and I seal option. Terminal bend radii and lead-in manufacturing option. RIGHT NGLE, PC THRU-HOLE PC MOUNTING 8SD9GE SPDT Not available with JXX actuators, I seal option. Terminal bend radii and lead-in manufacturing option. 4 RIGHT NGLE, PC THRU-HOLE, REVERSED TERMINLS 8SD94GE SPDT Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal. Terminal bend radii and lead-in manufacturing option. The 4 and R termination options are functionally identical and fit the same PC mounting pattern. The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the switch support legs. Unlike the R, the 4 option is available with UL/CS. Third ngle -37

38 800 Series Snap-acting Momentary Switches 6 RIGHT NGLE, PC THRU-HOLE TERMINTIONS PC MOUNTING 8SD96GE SPDT Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal. Terminal bend radii and lead-in manufacturing option. The 6 and R termination options are functionally identical and fit the same PC mounting pattern, The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the switch support legs. Unlike the R, the 6 option is available with UL/CS. R RIGHT NGLE WITH PCB PC MOUNTING 8SD9RGE SPDT Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option. R termination not UL/CS approved. R RIGHT NGLE WITH PCB, REVERSED TERMINLS PC MOUNTING 8SD9RGE SPDT Reversed terminals Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option. R termination not UL/CS approved. Third ngle -38

39 800 Series Snap-acting Momentary Switches TERMINTIONS V VERTICL RIGHT NGLE, PC THRU-HOLE,.50 PITCH 8SD9VGE SPDT V3 VERTICL RIGHT NGLE, SNP-IN,, PC THRU-HOLE,.50 PITCH V VERTICL RIGHT NGLE, EXTENDED, PC THRU-HOLE,.50 PITCH PC MOUNTING Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option. V VERTICL RIGHT NGLE, PC THRU-HOLE,.50 PITCH 8SD9VGE DPDT V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50 PITCH V VERTICL RIGHT NGLE, EXTENDED, PC THRU-HOLE,.50 PITCH PC MOUNTING.5 (3,8) Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option..33 TYP. (8,4) Third ngle -39

40 800 Series Snap-acting Momentary Switches TERMINTIONS V VERTICL RIGHT NGLE, PC THRU-HOLE, 50 PITCH 83SD9VGE 3PDT V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50 PITCH V VERTICL RIGHT NGLE, EXTENDED, PC THRU-HOLE,.50 PITCH PC MOUNTING.5 (3,8) Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option..33 TYP. (8,4) V VERTICL RIGHT NGLE, PC THRU-HOLE, 50 PITCH 84SD9VGE 4PDT V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50 PITCH V VERTICL RIGHT NGLE, EXTENDED, PC THRU-HOLE,.50 PITCH PC MOUNTING Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option. V, V6, V7, V8 VERTICL MOUNT, V-BRCKET V6 VERTICL MOUNT, V-BRCKET, SNP-IN PC MOUNTING OPTION CODE DIM V.555 (4,0) V6, V6.460 (,68) 8SD3 GE SPDT Not available with JXX actuators and I seal. V7.630 (6,00) V8.953 (4,) Third ngle -40

41 800 Series Snap-acting Momentary Switches V, V6, V7, V8 VERTICL MOUNT, V-BRCKET V6 VERTICL MOUNT, V-BRCKET, SNP-IN TERMINTIONS PC MOUNTING 8SD3 GE DPDT OPTION CODE DIM V.555 (4,0) V6, V6.460 (,68) V7.630 (6,00) Not available with JXX actuators and I seal. V8.953 (4,) V, V7, V8 VERTICL MOUNT, V-BRCKET PC MOUNTING 83SD3 GE 3PDT OPTION CODE DIM V.555 (4,0) V7.630 (6,00) Not available with JXX actuators and I seal. V8.953 (4,) V, V7, V8 VERTICL MOUNT, V-BRCKET PC MOUNTING OPTION CODE DIM 84SD3 GE 4PDT Not available with JXX actuators and I seal. V.555 (4,0) V7.630 (6,00) V8.953 (4,) Third ngle -4

42 800 Series Snap-acting Momentary Switches V3, V4, V9 VERTICL MOUNT, V-BRCKET V3 VERTICL MOUNT, V-BRCKET, SNP-IN TERMINTIONS PC MOUNTING 8SD3 GE SPDT OPTION CODE DIM V3, V3.460 (,68) V4.630 (6,00) Not available with J8X actuators and I seal. V9.50 (9,) V3, V4, V9 VERTICL MOUNT, V-BRCKET V3 VERTICL MOUNT, V-BRCKET, SNP-IN PC MOUNTING 8SD3 GE DPDT OPTION CODE DIM V3, V3.460 (,68) V4.630 (6,00) V9.50 (9,) Not available with J8X actuators and I seal. V4, V9 VERTICL MOUNT, V-BRCKET PC MOUNTING.630 (6,00) 83SD3V4GE 3PDT Not available with JXX actuators and I seal. OPTION CODE DIM V4.630 (6,00) V9.50 (9,) Third ngle -4

43 800 Series Snap-acting Momentary Switches V4, V9 VERTICL MOUNT, V-BRCKET TERMINTIONS PC MOUNTING.630 (6,00) 84SD3V4GE 4PDT OPTION CODE DIM V4.630 (6,00) Not available with JXX actuators and I seal. V9.50 (9,) CONTCT MTERIL OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS B P GOLD GOLD MTTE-TIN 4 LOW LEVEL/DRY CIRCUIT 8x5 MODELS ONLY: V C OR DC MX. G R GOLD OVER SILVER,3 GOLD 3 MTTE-TIN 4 LOW LEVEL/DRY CIRCUIT OR POWER 8X, U8X MODELS ONLY: 0.4 V 0 V C OR DC MX. OR 0 V C OR 8 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. LL CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. N.O. ND N.C. CONTCTS: Coin silver, with gold plate over nickel plate. 3 COMMON CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 TERMINLS: Copper alloy, with matte-tin over nickel plate. NOTE: ny models supplied with B, P, R or G contact material are RoHS compliant. U8-U84 models with all options (except R, R terminations) when ordered with mandatory G or R contact material. B or P contact material must be ordered with 8X5 models. G or R contact material must be ordered with 8X, U8X models. P or R contact material not available with Z, Z3 terminations. SEL E EPOXY SEL I EPOXY POTTED BSE NO. POLES DIM SP.40 (0,4) DP.440 (,8) 3P.505 (,83) 4P.505 (,83) NOTE: vailable with C, W-W4, Z, Z3 terminations only. Third ngle -43

44 800 Series Snap-acting Momentary Switches Cap Cap VILBLE HRDWRE Cap PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Cap, Snap-fitting plunger Cap, Snap-fitting plunger Cap, J80, J8, J8, J83 & J84 options only PRT NO. 45D0000 WHITE 45D0000 BLCK 45D03000 RED 45D04000 ORNGE 45D05000 YELLOW 45D06000 GREEN 45D07000 BLUE 45D09000 GRY PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Matte Frame Frame Cap, J85 & J95 options only PRT NO BLCK Material: Nylon Finish: Matte PRT NO BLCK Material: Nylon Finish: Matte PRT NO PRT NO WHITE BLCK RED ORNGE YELLOW GREEN BLUE GRY Material: Nylon Finish: Gloss Material: Nylon Finish: Matte Fits Z3 Termination female connector PRT NO vailable in loose pieces. NOTE: dditional nuts, locking rings and lockwashers available separately, see section Technical Data and dditional Hardware. Other cap & frame colors available, consult Customer Service Center. Third ngle -44

45 800 Series Snap-acting Momentary Switches VILBLE HRDWRE Frames snap into panel opening and are independent from switch mounting. ccurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. vailable in two basic styles and four panel thicknesses in. Material: Nylon. Finish: Matte..090 (,9) PNEL THK..5 (3,8) PNEL THK. TYPICL PPLICTION PRT NO PRT NO BLCK Panel Inserts bove frames (part nos. 43XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PNEL INSERT WITH HOLE FOR LED PRT NO BLNK PNEL INSERT WITHOUT HOLE FOR LED PRT NO BLCK Special colors, custom markings available, consult Customer Service Center. LED INFORMTION SWITCHES WITH LED SUPPLIED: J85, J95 OPTIONS: Rectangular LEDs are supplied on 800 Series pushbutton switches with J85 and J95 options. These LEDs are factory installed and are not replaceable. The following specifications apply: OPTION CODE 6 COLOR Green TYP. INTENSITY.0 mcd TYP. FORWRD VOLTGE TYP. FORWRD CURRENT 0 m MX RTINGS T 5ºC MBIENT TEMPERTURE FORWRD CONTINUOUS POWER VOLTGE FORWRD CURRENT DISSIPTION 50 m 5 mw Flat denotes cathode..00 DI. (5,08 ).05 SQ. TYP. (0,63) 3 5 Red* Yellow 0.5 mcd 4.0 mcd. V 0 m 0 m Process Information: Soldering to LED leads must be completed within 5 seconds at 500ºF (60ºC) maximum. Caution: Circuit elements must limit forward current of LED to 50m max. continuous. * Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center. LEDs are not supplied with J8, J84 options. LED snaps into switch frame surrounding actuator and is wired externally..5 V 30 m 50 m mw 5 mw.30 DI. (5,84 ).030 (0,76).340 (8,64) Suggested LED for J8 & J84 options. Dimensions for reference only. Third ngle.750 (9,05)

46 E00 Series Sealed Momentary Switches Features/Benefits Process sealed, withstands soldering and cleaning Long life contact design Snap-fitting plunger available, accepts a variety of caps RoHS compliant models available Typical pplications Instrumentation Telecommunications and networking equipment Computers and peripherals Models vailable Specifications CONTCT RTING: Q contact material: 4 5 V C or 8 V DC. See page -50 for additional ratings. ELECTRICL LIFE: 40,000 make-and-break cycles at full load. CONTCT RESISTNCE: Below 0 mω typ. 4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH: 000 Vrms sea level. OPERTING TEMPERTURE: -30ºC to 75ºC. CP INSTLLTION FORCE: 0 lbs. max. permissible. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). NOTE: ny models supplied with P, Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CSE & BUSHING: Glass filled nylon 6/6, flame retardant (UL 94V-0). PLUNGER: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0), with internal o-ring seal standard. SWITCH SUPPORT: Brass or steel, matte-tin plated. SWITCH SUPPORT RETINER: Stainless steel. END CONTCTS: Q contact material: Coin silver, silver plated. See -50 for additional ratings. CENTER CONTCTS & LL TERMINLS: Q contact material: Copper alloy, silver plated. See page -50 for additional ratings. TERMINL SEL: Epoxy. HRDWRE: Nut & locking ring-brass, nickel plated. Lockwasher-Steel, nickel plated. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -47 thru -5. For additional options not shown in catalog, consult Customer Service Center. ll models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E SPDT On-Mom. Plunger S. high L.338 high M.33 high, snap-fitting Bushing D Unthreaded Y Threaded, keyway Terminations Right angle, PC thru-hole V Vertical right angle, PC thru-hole C PC Thru-hole 3 Right angle, snap-in, PC thru-hole V3 Vertical right angle, snap-in, PC thru-hole R Right angle with PCB V3.460 high, V-bracket V4.630 high, V-bracket V6.460 high, V-bracket V8.953 high, V-bracket V3.460 high, snap-in V-bracket V8.953 high, snap-in V-bracket V9.50 high, snap-in V-bracket W.750 long, wire wrap Z Solder lug Contact Material B Gold P Gold, matte-tin Q Silver G Gold over silver Seal E Epoxy -46

47 E00 Series Sealed Momentary Switches SWITCH FUNCTION NO. POLES SP E MODEL NO. SWITCH FUNCTION POS. POS. C&K marking this side ON MOM. CONNECTED TERMINLS POS. POS. C&K marking this side - -3 SCHEMTIC SPDT SPDT Part number shown: ESDCQE Terminal Nos. For Reference Only MOM. = Momentary ll models with all options when ordered with G or Q contact material. PLUNGER S.8 HIGH L.338 HIGH M.33 HIGH, SNP-FITTING.0 DI. (3,05).4 (5,69).0 DI. (3,05) ** Standard with D bushing (as shown). Subtract.00 (,54) from plunger length when ordered with Y bushing. Standard with Y bushing (as shown). ** dd.00 (,54) from plunger length when ordered with D bushing. NOTE: Caps available for all plunger options, see pages -50 and -5. BUSHING D UNTHREDED Y THREDED, KEYWY PNEL MOUNTING S plunger standard with D bushing. L plunger standard with Y bushing. vailable only with C, Z terminations. Hardware: One dress nut part number 99D00, one hex nut and lockwasher supplied standard. Withstands 4 in./lbs. without distortion. NOTE: Internal o-ring actuator seal standard for all bushing options. -47 Third ngle

48 E00 Series Sealed Momentary Switches TERMINTIONS C PC THRU-HOLE PC MOUNTING Z SOLDER LUG W WIRE WRP SPDT SPDT Not available with P contact materials. SPDT RIGHT NGLE, PC THRU-HOLE.0 DI. (3,05) ESDBE SPDT.4 (5,69) SECTION - 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE W RIGHT NGLE, EXTENDED, PC THRU-HOLE PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. vailable with D bushing only. V VERTICL RIGHT NGLE, PC THRU-HOLE,.50 PITCH.0 DI. (3,05) ESDVBE SPDT.4 (5,69) V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50 PITCH PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. vailable with D bushing only. Third ngle -48

49 E00 Series Sealed Momentary Switches TERMINTIONS R RIGHT NGLE WITH PCB.0 DI. (3,05) PC MOUNTING.4 (5,69) ESDRBE SPDT NOTE: vailable with D bushing and B contact material only. V3, V4 VERTICL MOUNT, V-BRCKET V3, V9 VERTICL MOUNT, V-BRCKET, SNP-IN.0 DI. (3,05) PC MOUNTING ESD BE SPDT SNP-IN OPTION CODE DIM V3, V3.460 (,68) V4.630 (6,00) V9.50 (9,) NOTE: vailable with D bushing only. V6, V8 VERTICL MOUNT, V-BRCKET V8 VERTICL MOUNT, V-BRCKET, SNP-IN.0 DI. (3,05) PC MOUNTING ESD BE SPDT OPTION CODE DIM V6.460 (,68) NOTE: vailable with D bushing only. V8, V8.953 (4,) Third ngle -49

50 E00 Series Sealed Momentary Switches CONTCT MTERIL OPTION CODE B P Q CONTCT MTERIL GOLD TERMINL PLTING GOLD MTTE-TIN 6 GOLD 3 LOW LEVEL/DRY CIRCUIT SILVER 4,5 SILVER 5 POWER G GOLD OVER SILVER,3 LOW LEVEL/DRY CIRCUIT OR POWER RTINGS 0.4 V 0 V C OR DC MX. 4 5 V C 0R 8 V DC. 0.4 V 0 V C OR DC MX. OR 4 5 V C 0R 8 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. END CONTCTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTCTS & LL TERMINLS: Coin silver, with gold plate over nickel plate. 4 END CONTCTS: Coin silver, silver plated. 5 CENTER CONTCTS & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with matte-tin over nickel plate. NOTE: ny models supplied with P, Q, B or G contact material are RoHS compliant. ll models with all options when ordered with G or Q contact material. B contact material standard with all terminations except C, Z. B contact material must be ordered with R terminations. Q contact material standard with C, Z terminations. P contact materials not available with Z terminations. SEL E EPOXY SEL VILBLE HRDWRE Cap Cap Cap.0 (3,05).00 DI. (5,08 ).55 (3,94) PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss NOTE: dditional nuts, locking rings and lockwashers available separately, see section Technical Data and dditional Hardware. Other cap colors available, consult Customer Service Center. Third ngle -50

51 E00 Series Sealed Momentary Switches Cap, Snap-fitting plunger VILBLE HRDWRE Cap, Snap-fitting plunger Cap.95 (4,95).450 SQ. (,43).40 (6,0) PRT NO. 45D0000 WHITE 45D0000 BLCK 45D03000 RED PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Matte NOTE: dditional nuts, locking rings and lockwashers available separately, see section Technical Data and dditional Hardware. Other cap colors available, consult Customer Service Center. Frames snap into panel opening and are independent from switch mounting. ccurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. vailable in two basic styles and four panel thicknesses in. Material: Nylon. Finish: Matte. TYPICL PPLICTION.090 (,9) PNEL THK. PRT NO (3,8) PNEL THK. PRT NO BLCK Panel Inserts bove frames (part nos. 43XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PNEL INSERT WITH HOLE FOR LED PRT NO BLNK PNEL INSERT WITHOUT HOLE FOR LED PRT NO BLCK Special colors, custom markings available, consult Customer Service Center. Third ngle -5

52 8060 Series lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers and peripherals Telecommunications and networking equipment Models vailable Specifications CONTCT RTING: Q contact material: 6 0 V C or 8 V DC; 3 50 V C. See page -59 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break cycles at full load. CONTCT RESISTNCE: Below 0 mω typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH:,000 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 65ºC SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). CP INSTLLTION FORCE: 0 lbs. maximum permissible. NOTE: ny models supplied with P, R, S, Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CSE: Glass filled nylon 6/6 or diallyl phthalate (DP), flame retardant (UL 94V-0). PLUNGER: S, S, S Options: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0). L, L Options: Brass, nickel plated. CP & FRME: Nylon, black standard. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTCTS: Q contact material: Coin silver, silver plated. See page -59 for additional contact materials. CENTER CONTCT & LL TERMINLS: Q contact material: Copper alloy, silver plated. See page -59 for additional contact materials. TERMINL SEL: Epoxy. Refer to soldering and cleaning in Technical Data Chapter. HRDWRE: Nut & Locking Ring: Brass, nickel plated; Lockwasher: Steel, nickel plated. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -53 thru -6. For additional options not shown in catalog, consult Customer Service Center. ll models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods. Switch Function 86 SPDT On-On 868 SPDT On-Mom. 86 DPDT On-On ctuator or Plunger S.70 high plunger with.375 dia. cap J80 Snap-in J8 Snap-in with frame J8 Snap-in with frame for LED J86 Snap-in with frame & LED L.740 high plunger with.395 dia. cap L.740 high plunger with.590 dia. cap S.65 high plunger with.00 dia. cap S.70 high plunger with.30 dia. cap Bushing H.300 high, flat, hi torque H9.300 high, flat, hi torque NONE No bushing choice required Y3 7.6mm, keyway Terminations Right angle, PC thru-hole V Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug 3 Right angle, snap-in, PC thru-hole V3 Vertical right angle, snap-in, PC thru-hole V3.460 high, V-bracket V4.630 high, V-bracket V6.460 high, V-bracket V.555 high, snap-in V-bracket V3.460 high, snap-in V-bracket W.750 long, wire wrap Z3 Quick connect Contact Material B Gold P Gold, matte-tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy I Epoxy potted base Cap Color Black White 3 Red 4 Orange 5 Yellow 9 Gray Frame Color Black LED Color 3 Red NONE Models without LED -5

53 8060 Series lternate ction and Momentary Switches SWITCH FUNCTION NO. POLES SP MODEL NO SWITCH FUNCTION POS. POS. C&K marking this side ON ON ON MOM. CONNECTED TERMINLS POS. POS. C&K marking this side SPDT SCHEMTIC SPDT Part number shown: 86SHZQE Terminal Nos. For Reference Only DP 86 ON ON -3,5-6 -,5-4 DPDT DPDT Part number shown: 86SHZQE MOM. = Momentary ll models Terminal Nos. For Reference Only with all options when ordered with G or Q contact material. CTUTOR SNP-IN FRONT MOUNT CTUTOR OR PLUNGER CP COLOR J80 SNP-IN PNEL MOUNTING OPTION CODE CP COLOR * BLCK WHITE 3 RED 4 ORNGE 5 YELLOW 9 GRY Cap Finish: matte. Other colors available, consult Customer Service Center. vailable with C, W, Z or Z3 terminations. NOTE: Caps & frames available separately, see pages -60 and -6. J8 SNP-IN WITH BLCK FRME *Increase this dimension to.60/.65 (5,75/5,88) for.09/.5 (,4/,8) thick panels. PNEL MOUNTING * *Increase this dimension to.60/.65 (5,75/5,88) for.09/.5 (,4/,8) thick panels. Third ngle -53

54 8060 Series lternate ction and Momentary Switches CTUTOR SNP-IN FRONT MOUNT J8 SNP-IN WITH BLCK FRME FOR LED CTUTOR OR PLUNGER CP COLOR vailable with C, W, Z or Z3 terminations. LED not included. For LED information, see page -6. NOTE: Caps & frames available separately, see pages -60 and -6. Other colors available, consult Customer Service Center. OPTION CODE BLCK WHITE 3 RED CP COLOR 4 ORNGE 5 YELLOW 9 GRY CTUTOR SNP-IN FRONT MOUNT CTUTOR OR PLUNGER CP COLOR LED COLOR J86 SNP-IN WITH BLCK FRME ND LED PNEL MOUNTING * 86J86ZQE3 SPDT * Increase this dimension to.60/.65 (5,75/5,88) for.09/.5 (,3/3,8) thick panels. vailable with C, W, Z or Z3 terminations and SPDT models only. NOTE: Caps & frames available separately, see pages -60 and -6. Other colors available, consult Customer Service Center. OPTION CODE BLCK WHITE 3 RED CP COLOR 4 ORNGE 5 YELLOW 9 GRY OPTION CODE LED COLOR 3 RED For LED information, see page -6. Third ngle -54

55 S PLUNGER WITH CP P/N Series lternate ction and Momentary Switches PLUNGER CTUTOR OR PLUNGER S PLUNGER WITH CP P/N 7089 CP COLOR S PLUNGER WITH CP P/N 808 L PLUNGER WITH CP P/N 894 L PLUNGER WITH CP P/N 8940 OPTION CODE BLCK WHITE 3 RED CP COLOR 4 ORNGE 5 YELLOW 9 GRY Cap Finish: gloss. Cap supplied not installed. Other colors available, consult Customer Service Center. NOTE: When selecting plunger and cap option, bushing selection must also be made, see below. BUSHING H.300 HIGH THREDED, FLT H9.300 HIGH UNTHREDED, FLT NONE NO BUSHING CHOICE REQUIRED (JXX CTUTORS) Y3 7.6mm THREDED, KEYWY /4±40 UNS- H bushing standard with C, W, Z or Z3 terminations. H9 bushing standard with, 3, V, V3, or V3-V3 terminations. Withstands in./lbs. of torque with no distortion. Withstands in./lbs. of torque with no distortion. NOTE: When selecting bushing option, plunger selection must also be made, see above. No bushing option choice required when any JXX actuator option is selected. NOTE. Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Optional mounting nut and locking ring styles and finishes available, see section Technical Data and dditional Hardware. -55 Third ngle

56 8060 Series lternate ction and Momentary Switches C PC THRU-HOLE TERMINTIONS PC MOUNTING Z SOLDER LUG SPDT and DPDT SPDT and DPDT Not available with P, S or R contact material. Z3 QUICK CONNECT W WIRE WRP.750 (9,05) SPDT and DPDT Not available with P, S or R contact material. Mating quick connector available; order part number , page -6. SPDT and DPDT RIGHT NGLE, PC THRU- HOLE.30 (3,3).38 (3,5) 86SH9BE SPDT SECTION - 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE PC MOUNTING Not available with I seal. Terminal bend radii and lead-in manufacturing option. NOTE: PC pattern must clear switch support leg. Third ngle -56

57 8060 Series lternate ction and Momentary Switches RIGHT NGLE, PC THRU-HOLE TERMINTIONS SECTION - 86SH9BE DPDT 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE PC MOUNTING Not available with I seal. Terminal bend radii and lead-in manufacturing option. V VERTICL RIGHT NGLE, PC THRU-HOLE,.50 PITCH 86SH9VBE SPDT V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50 PITCH PC MOUNTING Not available with I seal. Terminal bend radii and lead-in manufacturing option. Third ngle -57

58 8060 Series lternate ction and Momentary Switches TERMINTIONS V VERTICL RIGHT NGLE, PC THRU-HOLE,.50 PITCH 86SH9VBE DPDT SECTION - V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50 PITCH PC MOUNTING Not available with I seal. Terminal bend radii and lead-in manufacturing option. V6 VERTICL MOUNT, V-BRCKET V VERTICL MOUNT, V-BRCKET, SNP-IN PC MOUNTING 86SH9 BE SPDT Not available with I seal. OPTION CODE DIM V.555 (4,0) V6.460 (,68) V6 VERTICL MOUNT, V-BRCKET V VERTICL MOUNT, V-BRCKET, SNP-IN PC MOUNTING OPTION CODE DIM 86SH9 BE DPDT V.555 (4,0) V6.460 (,68) Not available with I seal. Third ngle -58

59 8060 Series lternate ction and Momentary Switches V3, V4 VERTICL MOUNT, V-BRCKET V3 VERTICL MOUNT, V-BRCKET, SNP-IN TERMINTIONS PC MOUNTING 86SH9 BE SPDT OPTION CODE DIM V3, V3.460 (,68) Not available with I seal. V4.630 (6,00) V3, V4 VERTICL MOUNT, V-BRCKET V3 VERTICL MOUNT, V-BRCKET, SNP-IN PC MOUNTING 86SH9 BE DPDT SNP-IN OPTION CODE DIM Not available with I seal. V3, V3.460 (,68) V4.630 (6,00) CONTCT MTERIL OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS B P GOLD GOLD MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT 0.4 V 0 V C OR DC MX. Q S SILVER 4,5 SILVER 5 MTTE-TIN 6 POWER 6 0 V C OR 8 V DC; 3 50 V C. G R GOLD OVER SILVER,3 GOLD 3 MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT OR POWER 0.4 V 0 V C OR DC MX. OR 6 0 V C OR 8 V DC; 3 50 V C. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. END CONTCTS: Coin silver, with gold plate over nickel plate. ll models contact material. with all options when ordered with S, R, G, or Q 3 CENTER CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CONTCTS: Coin silver, silver plated. B contact material standard with all terminations except C, Z & Z3. Q contact material standard with C, Z & Z3 terminations. P, S & R contact materials not available with Z & Z3 terminations. 5 CENTER CONTCT & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with matte-tin over nickel plate. NOTE: ny models supplied with P, S, R,Q, B or G contact material are RoHS compliant. Third ngle -59

60 8060 Series lternate ction and Momentary Switches SEL E EPOXY SEL I EPOXY POTTED BSE NOTE: vailable with C, W, Z, Z3 terminations only. VILBLE HRDWRE Cap.0 (3,05).00 DI. (5,08 ) Cap Cap.55 (3,94) PRT NO WHITE BLCK RED ORNGE YELLOW GRY Material: Nylon Finish: Gloss Cap, Snap-fitting plunger PRT NO WHITE BLCK RED ORNGE YELLOW GRY Material: Nylon Finish: Gloss Cap, Snap-fitting plunger PRT NO WHITE BLCK RED ORNGE YELLOW GRY Material: Nylon Finish: Gloss Cap, J80, J8 & J8 options only PRT NO. 45D0000 WHITE 45D0000 BLCK 45D03000 RED 45D04000 ORNGE 45D05000 YELLOW 45D09000 GRY PRT NO WHITE BLCK RED ORNGE YELLOW GRY PRT NO WHITE BLCK RED ORNGE YELLOW GRY PRT NO WHITE BLCK RED ORNGE YELLOW GRY Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Matte Cap, J86 & J96 options only Frame Frame PRT NO PRT NO WHITE BLCK RED ORNGE YELLOW GRY PRT NO BLCK Material: Nylon Finish: Matte PRT NO BLCK Material: Nylon Finish: Matte Material: Nylon Finish: Gloss Material: Nylon Finish: Matte NOTE: dditional nuts, locking rings and lockwashers available separately, see section Technical Data and dditional Hardware. Other cap & frame colors available, consult Customer Service Center. Third ngle -60

61 8060 Series lternate ction and Momentary Switches Fits Z3 Termination female connector PRT NO vailable in loose pieces. VILBLE HRDWRE Frames snap into panel opening and are independent from switch mounting. ccurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. vailable in two basic styles and four panel thicknesses in. Material: Nylon. Finish: Matte. TYPICL PPLICTION.090 (,9) PNEL THK. PRT NO (3,8) PNEL THK. PRT NO BLCK Panel Inserts bove frames (part nos. 43XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PNEL INSERT WITH HOLE FOR LED PRT NO BLNK PNEL INSERT WITHOUT HOLE FOR LED PRT NO BLCK Special colors, custom markings available, consult Customer Service Center. LED INFORMTION SWITCHES WITH LED SUPPLIED: J86 OPTION: Rectangular LEDs are supplied on 8060 Series pushbutton switches with J86 option. These LEDs are factory installed and are not replaceable. The following specifications apply: OPTION CODE COLOR TYP. INTENSITY TYP. FORWRD VOLTGE TYP. FORWRD CURRENT MX RTINGS T 5ºC MBIENT TEMPERTURE FORWRD CONTINUOUS POWER VOLTGE FORWRD CURRENT DISSIPTION Flat denotes cathode..00 DI. (5,08 ).05 SQ. TYP. (0,63) Green Red* Yellow.0 mcd 0.5 mcd 4.0 mcd. V 0 m 0 m 0 m.30 DI. (5,84 ) Process Information: Soldering to LED leads must be completed within 5 seconds at 500ºF (60ºC) maximum. Caution: Circuit elements must limit forward current of LED to 50m max. continuous. * Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center. LEDs are not supplied with J8 & J84 options. LED snaps into switch frame surrounding actuator and is wired externally..5 V 50 m 30 m 50 m 5 mw 75 mw 5 mw.030 (0,76).340 (8,64) Suggested LED for J8 & J84 options. Dimensions for reference only..750 (9,05) Third ngle -6

62 8500 Series Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment Computers and peripherals Models vailable Specifications CONTCT RTING: Q contact material (853X Models): 0 V C or 8 V DC; (855X Models): 3 0 V C or 8 V DC. See page -65 for additional ratings. ELECTRICL LIFE: 853X MODELS: 50,000 actuations at full load. 855X MODELS: 0,000 actuations at full load. CONTCT RESISTNCE: Below 30 mω typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH:,000 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 65ºC. TORQUE SPECS: T, T 5/3 bushings - 50 in. lbs max. ll other /4-40 bushing types in. lbs max. Materials CSE: Glass filled phenolic or diallyl phthalate (DP) (UL 94V-0). PLUNGER: Phenolic or glass filled polyester, black standard(ul94v-0). CP & FRME: Nylon, black, standard. BUSHING: Brass, nickel plated. CONTCTS: Q contact material: Coin silver, silver plated. See page -65 for additional contact materials. TERMINLS: Q contact material: Copper alloy, silver plated. See page -65 for additional contact materials. TERMINL SEL: Epoxy. HRDWRE: Nut: Brass, nickel plated; Lockwasher: Steel, bright nickel plated. NOTE: ny models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -63 thru -66. For additional options not shown in catalog, consult Customer Service Center. ll models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods. Switch Function 853 SPST Off-Mom. mp 853 SPST Off-Mom. mp 8533 SPST On-Mom. mp 8534 SPST On-Mom. mp 855 SPST Off-Mom. 3 mps 855 SPST Off-Mom. 3 mps ctuator or Plunger M.50 high J8 Snap-in with frame J8 Snap-in with frame for LED S.0 high T T 5/3 bushing 5/3 bushing with frame (853 and 8534 only) Terminations Z Solder lug V* Right angle, PC thru-hole C PC Thru-hole Contact Material Q Silver B Gold G Gold over silver Seal E Epoxy D No epoxy seal * vailable with M or S plunger models, and B contact material only. -6 Cap or Plunger Color Black White 3 Red 9 Gray Frame Color Black NONE Models without frame

63 8500 Series Subminiature Switches SWITCH FUNCTION NO. POLES SP MODEL NO RTING MP 3 MPS SWITCH FUNCTION POS. POS. OFF MOM..095 (,4) TYP. TOTL TRVEL with overtravel.04 (,07) TYP. CTUTION FORCE 7.7 oz (0g) TYP. N.O. with overtravel SCHEMTIC SPST Part number shown: 853MZQE SP MP 3 MPS OFF MOM..050 (,7) TYP. 6 oz (70g) TYP. N.O. SPST Part number shown: 853MZQE SP MP MP ON ON MOM. MOM..080 (,03) TYP..03 (0,8) TYP. with pretravel.057 (,45) TYP. with overtravel.08 (0,7) TYP..5 oz (456 g) TYP. 0.3 oz (8g) TYP. N.C. with pretravel N.C. with overtravel SPST Part number shown: 8533MZQE MOM. = Momentary ll models with all options when ordered with G or Q contact material. Third ngle -63

64 8500 Series Subminiature Switches M.50 HIGH PLUNGER PLUNGER S.0 HIGH PLUNGER CTUTOR OR PLUNGER NOTE: One mounting nut and lockwasher supplied with all actuators (except T actuator: two nuts supplied). PLUNGER COLOR PNEL MOUNTING CP COLOR OPTION CODE PLUNGER COLOR BLCK 3 RED T 5/3 BUSHING CTUTOR CTUTOR OR PLUNGER PNEL MOUNTING NOTE: No frame color choice required. T 5/3 BUSHING WITH FRME OPTION CODE CP COLOR BLCK WHITE 3 RED 9 GRY NOTE: No frame color choice required. vailable with 853 and 8534 models only. CTUTOR SNP-IN FRONT MOUNT CTUTOR OR PLUNGER Cap Finish: gloss. Other colors available, consult Customer Service Center. One mounting nut and lockwasher supplied with all actuators (except T actuator: two nuts supplied). NOTE: Caps available for plunger options, see page -65. CP COLOR FRME COLOR J8 SNP-IN WITH FRME OPTION CODE CP ND FRME COLOR BLCK Cap and Frame Finish: matte. Other colors available, consult Customer Service Center. One mounting nut and lockwasher supplied with all actuators. NOTE: Caps & frames available separately, see pages -65 and -66. J8 SNP-IN WITH FRME FOR LED NOTE: LED snaps securely into frame. Height depends on LED used. LED not included. For LED information, see page -66. Third ngle -64

65 8500 Series Subminiature Switches Z SOLDER LUG V RIGHT NGLE, PC THRU-HOLE TERMINTIONS C PC THRU-HOLE PC MOUNTING vailable with DIM. "X" NOTE: vailable with M or S plunger models, and B contact material only. MODEL NO. DIM X 853, , CONTCT MTERIL OPTION CODE RoHS COMPLINT * RoHS COMPTIBLE * TERMINL PLTING CONTCT MTERIL RTINGS B YES YES GOLD GOLD LOW LEVEL/DRY CIRCUIT 0.4 V 0 V C OR DC MX. Q YES YES SILVER 4 SILVER 5 POWER 853X MODELS: 0 V C OR 8 V DC. 855X MODELS: 3 0 V C OR 8 V DC. G YES YES GOLD OVER SILVER GOLD 3 LOW LEVEL/DRY CIRCUIT OR POWER 0.4 V V C OR DC MX. OR 853X MODELS: 0 V C OR 8 V DC. 855X MODELS: 3 V C OR 8 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. CONTCTS: Coin silver, with gold plate over nickel plate. 3 TERMINLS: Copper alloy, with gold plate over nickel plate. 4 CONTCTS: Coin silver, silver plated. 5 TERMINLS: Copper alloy, silver plated. NOTE: ny models supplied with Q, B or G contact material are RoHS compliant. ll models with all options when ordered with G or Q contact material. Q contact material standard with C, Z terminations. 855 & 855 available with Q contact material only. SEL E EPOXY SEL Cap for 0.57 dia. plungers REPLCEMENT HRDWRE Cap, J80, J8 & J 8 options only Frame PRT NO WHITE BLCK RED GRY 85XT, 8534T models only Material: Nylon Finish: Gloss.50 (3,8) FOR (5,08) FOR (7,6).330 DI. (8,38) PRT NO WHITE BLCK RED GRY 85XT, 853T, 8533T, 8534T models only Material: Nylon Finish: Gloss PRT NO WHITE BLCK RED GRY Material: Nylon Finish: Gloss or matte Other colors available, consult Customer Service Center. PRT NO BLCK Material: Nylon Finish: Matte Third ngle -65

66 8500 Series Subminiature Switches Frame PRT NO BLCK Material: Nylon Finish: Matte VILBLE HRDWRE NOTE: dditional nuts, locking rings and lockwashers available separately, see section Technical Data and dditional Hardware. Other colors available, consult Customer Service Center. Frames snap into panel opening and are independent from switch mounting. ccurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. vailable in two basic styles and four panel thicknesses in. Material: Nylon. Finish: Matte. TYPICL PPLICTION.090 (,9) PNEL THK. PRT NO (3,8) PNEL THK. PRT NO BLCK Panel Inserts bove frames (part nos. 43XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PNEL INSERT WITH HOLE FOR LED PRT NO BLNK PNEL INSERT WITHOUT HOLE FOR LED PRT NO BLCK Special colors, custom markings available, consult Customer Service Center. LED INFORMTION Process Information: Soldering to LED leads must be completed within 5 seconds at 500ºF (60ºC) maximum. LEDs are not supplied with J8 option. LED snaps into switch frame surrounding actuator and is wired externally. Flat denotes cathode..30 DI. (5,84 ).00 DI. (5,08 ).030 (0,76).05 SQ. TYP. (0,63).340 (8,64).750 (9,05) Suggested LED for J8 option. Dimensions for reference only. Third ngle -66

67 KM Series Subminiature Switches Features/Benefits Reliable contact design vailable with pretravel and overtravel RoHS compliant Typical pplications larm systems Computers Detector switch application Models vailable Specifications CONTCT RTING: Q contact material (KM, KM Models): V C or DC (UL); (KM33 Model): 5 V C or 8 V DC. See page -69 for additional ratings. ELECTRICL LIFE: 0,000 actuations min. at full load. CONTCT RESISTNCE: Below 30 mω typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH:,000 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 85ºC. CP INSTLLTION FORCE: 0 lbs. max. permissible. NOTE: ny models supplied with Q or B contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials HOUSING & BUSHING: 6/6 nylon (UL94V-), black. CTUTOR: 6/6 nylon (UL 94V-), natural. Internal o-ring seal, available on KM & KM33 models. MOVBLE CONTCT: B contact material: Bronze or copper, with gold plate over nickel plate. See page -69 for additional contact materials. STTIONRY CONTCTS & TERMINLS: B contact material: Copper, with gold plate over nickel plate. See page -69 for additional contact materials. RETURN SPRING: Music wire, phosphor coated. MOUNTING NUT: Brass, nickel plated. TERMINL SEL: Epoxy. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -68 and -70. For additional options not shown in catalog, consult Customer Service Center. Switch Function KM On-Mom., SPDT KM Off-Mom., SPST, N.O. KM33 On-Mom., SPST, N.C. ctuator high,. dia. KM 0. dia. KM, Stepped,.08 dia. KM33 Bushing/Mounting Style Right angle RR /4-40 thread,.5 high Terminations 05.0 quick connect 08 Right angle, PC thru-hole 0 PC Thru-hole Contact Material B Gold Q Silver Seal NONE No seal E Epoxy -67

68 KM Series Subminiature Switches SWITCH FUNCTION NO. POLES SP MODEL NO. KM SWITCH FUNCTION POS. POS. OFF MOM. CONNECTED TERMINLS POS. POS. OPEN - SPST N.O. SCHEMTIC KM33 ON MOM. - OPEN SPST N.C. SPST Part number shown: KM0RR05BE SP KM ON MOM SPDT SPDT Part number shown: KM008BE CTUTOR HIGH,. DI. 0. DI. KM models only. KM models only. KM33 models only. NOTE: Caps available for plunger options, see page -70. Third ngle -68

69 KM Series Subminiature Switches RIGHT NGLE BUSHING/ MOUNTING STYLE RR /4-40 THRED,.5 HIGH KM models only. KM & KM33 models only. PNEL MOUNTING PC MOUNTING KM & KM33 models. KM models only. KM models only. TERMINTIONS 05.0 QUICK CONNECT 08 RIGHT NGLE, PC THRU-HOLE 0 PC THRU-HOLE KM models only. KM models only. CONTCT MTERIL OPTION CODE RoHS COMPLINT * RoHS COMPTIBLE * CONTCT ND TERMINL MTERIL RTINGS B YES YES GOLD LOW LEVEL/DRY CIRCUIT 0.4 V 0 V C OR DC MX. Q YES YES SILVER POWER V C OR DC (KM, KM) (UL) 5 V C OR 8 V DC (KM33). * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. STTIONRY CONTCTS & TERMINLS: Copper, with gold plate over nickel plate. MOVBLE CONTCT: Phosphor bronze or beryllium copper, with gold plate over nickel plate. STTIONRY CONTCTS & TERMINLS: Copper, silver plated (standard with all termination options). MOVBLE CONTCT: Phosphor bronze or beryllium copper, silver plated. 3 STTIONRY CONTCTS & TERMINLS: Copper, with gold plate over nickel plate over silver plate. MOVBLE CONTCT: Phosphor bronze or beryllium copper, with gold plate over nickel plate over silver plate. NOTE: ny models supplied with Q or B contact material are RoHS compliant. KM, KM models when ordered with Q contact material. SEL NONE NO SEL E EPOXY SEL Third ngle -69

70 KM Series Subminiature Switches Cap, KM33 models VILBLE HRDWRE Cap, KM and KM models Cap, KM and KM models.45 DI. (6, ).87 (4,75).0 (3,05).00 DI. (5,08 ).375 DI. (9,53 ).50 (6,35).08 (,03).55 (3,94).0 (3,05) PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Cap, KM and KM models Cap, KM models.38 (3,5).30 DI. (7,87 ).95 (4,95).450 SQ. (,43).40 (6,0) PRT NO WHITE BLCK RED.50 (6,35) PRT NO WHITE BLCK RED PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss Material: Nylon Finish: Gloss Material: Nylon Finish: Matte NOTE: Other cap colors available, consult Customer Service Center. Third ngle -70

71 8600 Series Microminiature Switches Features/Benefits vailable with overtravel Normally closed models available Microminiature size ideal for applications where space is limited RoHS compliant Typical pplications Detection Telecommunications and networking equipment Computers and peripherals Models vailable Specifications CONTCT RTING: Q contact material (863, 863 Models): V C or 8 V DC; V C; (8633 Model): 50 0 V C or 8 V DC; 5 50 V C. See page -73 for additional ratings. ELECTRICL LIFE: 863 and 8633 MODELS: 50,000 actuations at full load. 863 MODEL: 00,000 actuations at full load. CONTCT RESISTNCE: Below 30 mω typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 09 Ω min. DIELECTRIC STRENGTH: 500 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 65ºC. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9. Materials CSE: Glass filled phenolic or diallyl phthalate (DP), (UL94V-0). PLUNGER: Glass filled nylon (UL94V-0), black standard. BUSHING: Brass, nickel plated. CONTCTS: Q contact material: Coin silver, silver plated. See page -73 for additional contact materials. TERMINLS: 863, 863 MODELS: Copper alloy, silver plated MODEL: Q contact material: Coin silver. See page -73 for additional contact materials. TERMINL SEL: 8633 MODEL: Epoxy. 863, 863 MODELS: Terminals insert molded. HRDWRE: Nut: Brass, nickel plated. NOTE: ny models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -7 and -73. For additional options not shown in catalog, consult Customer Service Center. Switch Function 863 SPST Off-Mom. 863 SPST Off-Mom SPST On-Mom. Termination Z Solder lug C PC Thru-hole Contact Material B Gold Q Silver G Gold over silver Seal D No epoxy E Epoxy Plunger Color Black 3 Red -7

72 8600 Series Microminiature Switches SWITCH FUNCTION NO. POLES SP SPST MODEL NO. 863 SWITCH FUNCTION POS. POS. OFF MOM..040 (,0) TYP. TOTL TRVEL CTUTION FORCE 5 oz (40g) TYP. N.O. SCHEMTIC PNEL MOUNTING Part number shown: 863ZQD Terminals Insert Molded SP 863 OFF MOM..06 (,69) TYP. with overtravel.04 (0,6) TYP. 6.5 oz (77g) TYP. N.O. with overtravel SPST PNEL MOUNTING Part number shown: 863ZQD Terminals Insert Molded SP 8633 ON MOM..048 (,) TYP. 5 oz (40g) TYP. N.C. SPST PNEL MOUNTING Part number shown: 8633ZQE MOM. = Momentary NOTE: Caps available for plunger options, see page -73. TERMINTIONS Z SOLDER LUG C PC THRU-HOLE 863, 863 models only models only. 863, 863 models only. PC MOUNTING Third ngle -7

73 8600 Series Microminiature Switches CONTCT MTERIL OPTION CODE B Q G RoHS COMPLINT * YES YES YES RoHS COMPTIBLE * YES YES YES CONTCT MTERIL GOLD SILVER 4 GOLD OVER SILVER 4 TERMINL PLTING GOLD SILVER 5 GOLD 3 LOW LEVEL/ DRY CIRCUIT POWER LOW LEVEL/DRY CIRCUIT OR POWER RTINGS 0.4 V 0 V C OR DC MX. 863, 863 MODELS: V C OR 8 V DC; V C MODELS: 50 0 V C OR 8 V DC; 5 50 V C. 0.4 V 0 V C OR DC MX. OR 863, 863 MODELS: V C OR 8 V DC; V C MODELS: 50 0 V C OR 8 V DC; 5 50 V C. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. CONTCTS: Coin silver, with gold plate over nickel plate. 3 TERMINLS: Copper alloy, with gold plate over nickel plate model only: Coin silver, with gold plate over nickel plate. 4 CONTCTS: Coin silver, silver plated. 5 TERMINLS: Copper alloy, silver plated model only: coin silver. NOTE: ny models supplied with Q, B or G contact material are RoHS compliant. 863, 863 models with all options when ordered with G or Q contact material. Q contact material standard with C, Z terminations. SEL D NO EPOXY SEL E EPOXY SEL Not available on 8633 model. Standard on 863, 863 models. Not available on 863, 863 models. Standard on 8633 model only. PLUNGER COLOR OPTION CODE COLOR BLCK 3 RED VILBLE HRDWRE Cap.45 DI. (6, ).87 (4,75) PRT NO WHITE BLCK RED Material: Nylon Finish: Gloss.08 (,03) NOTE: Other cap colors available, consult Customer Service Center. Third ngle -73

74 8700 Series Overtravel Switches Features/Benefits Extended pre-travel or over-travel Heavy-duty brass plunger Long electrical life 00K cycles RoHS compliant Typical pplications Telecommunications High end Instrumentation Medical & test equipment Detection Specifications CONTCT RTING: Q contact material: 0 V C or 8 V DC. See page -76 for additional ratings. ELECTRICL LIFE: 00,000 actuations at full load. CONTCT RESISTNCE: Below 30 mω typ. -4 V DC, 00 m. INSULTION RESISTNCE: 0 3 Ω min. DIELECTRIC STRENGTH:,000 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 65ºC. NOTE: ny models supplied with Q, or B contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CSE: Diallyl phthalate (DP) (UL 94V-0). PLUNGER: brass, nickel plated PBT polyester, black. BUSHING: brass, nickel plated. CONTCTS: Q contact material: Coin silver, silver plated. See page -76 for additional contact materials. TERMINLS: Q contact material: Copper alloy, silver plated. See page -76 for additional contact materials. TERMINL SEL: Epoxy. HRDWRE: Nut: Brass, nickel plated; lockwasher: Steel, bright nickel plate. One mounting nut & lockwasher supplied with all switches. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -75 and -76. For additional options not shown in catalog, consult Customer Service Center. ll models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods. Switch Function 873 SPST Off-Mom. 873 SPST Off-Mom. Plunger S.390 high, brass S.390 high, polyester Bushing H.50 high Terminations Z Solder lug Contact Material Q Silver B Gold Seal E Epoxy -74

75 8700 Series Overtravel Switches SWITCH FUNCTION NO. POLES SP SPST MODEL NO. 873 SWITCH FUNCTION POS. POS. OFF MOM..390 (9,9) TYP. TOTL TRVEL with overtravel.3 TYP. CTUTION FORCE 4.7 oz TYP. N.O. with overtravel SPST SCHEMTIC Part number shown: 873SHZQE SP 873 OFF MOM..390 (9,9) TYP. with overtravel.350 TYP.. oz TYP. N.O. with overtravel SPST SPST Part number shown: 873SHZQE MOM. = Momentary PLUNGER S.390 HIGH, BRSS S.390 HIGH, PBT POLYESTER vailable with 873 model only. vailable with 873 model only. BUSHING H.50 HIGH PNEL MOUNTING Third ngle -75

76 8700 Series Overtravel Switches Z SOLDER LUG TERMINTIONS CONTCT MTERIL OPTION CODE RoHS COMPLINT * RoHS COMPTIBLE * CONTCT MTERIL TERMINL PLTING RTINGS Q YES YES SILVER SILVER POWER 5 V C OR 8 V DC. B YES YES GOLD GOLD LOW LEVEL/DRY CIRCUIT 0.4 V 0 V C OR DC MX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. NOTE: ny models supplied with Q, or B contact material are RoHS compliant. SEL E EPOXY SEL Third ngle -76

77 GP Series Sealed Ultraminiature Switches Features/Benefits Ultraminiature design saves space Process compatible, withstands most soldering and washing processes Thru-hole and surface mount models available Sealed construction internal o-ring and epoxy base RoHS compliant Typical pplications Telecommunications and network equipment Computers and peripheral products Instrumentation Medical pplications Specifications CONTCT RTING: 0.4 V 0 V C or DC max. MECHNICL & ELECTRICL LIFE: 40,000 make-and-break cycles at full load. CONTCT RESISTNCE: Below 50 mω typ. -4 V DC, 00 m. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH: 500 Vrms sea level. OPERTING TEMPERTURE: 40ºC to 85ºC. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. PCKGING: Surface mount switches standard in anti-static tape and reel packaging per EI 48-3, see page -80 for drawings and reel information. Thru-Hole parts are shipped in trays. ll models are RoHS compliant and compliant. Materials HOUSING & BSE: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0). CTUTOR: Glass filled nylon 4/6, flame retardant (UL 94V-0) with standard internal o-ring seal. SWITCH SUPPORT: Brass, tin plated. MOVBLE CONTCT: Copper alloy, with gold plate over nickel plate. STTIONRY CONTCTS Copper alloy, with gold plate over nickel plate. TERMINLS: Copper alloy, with gold flash over nickel plate. TERMINL SEL: Epoxy/Urethane. ll terminals insert molded. NOTE: ny models supplied with B contact material are RoHS compliant and compatible. NOTE: Materials listed above are general specifications. Specifications available for specific and custom switches, consult Customer Service Center. CUTION: PC mounting layouts and pads as shown are designed to be compatible with the latest equipment and reflow techniques. Care should be taken in the design and location of PC lands to suit individual needs. Orientation relative to reflow direction may significantly impact solder joint integrity. How To Order Complete part numbers for GP Series Sealed Ultraminiature Switches are shown on pages -78 thru -80. SWITCH FUNCTION POS. POS. PRT NUMBER SCHEMTIC GPMCBE OFF MOM. Conn. Terms. OPEN -3 SPST Terminal nos. for reference only. GPMCBE SPST GPMCBE ON MOM. Conn. Terms - -3 SPDT MOM. = Momentary GP Model -77

78 GP Series Sealed Ultraminiature Switches GPMBE SPST Terminal nos. for reference only. PRT NUMBER GPMBE Conn. Terms. GPMBE SWITCH FUNCTION POS. POS. OFF MOM. OPEN -3 ON MOM. SPST SCHEMTIC Conn. Terms SPDT MOM. = Momentary GP Model SWITCH FUNCTION POS. POS. GPMSBE SPST PRT NUMBER GPMSBE OFF MOM. SCHEMTIC Conn. Terms OPEN -3 SPST GPMSBE ON MOM. Conn. Terms - -3 SPDT MOM. = Momentary SWITCH FUNCTION POS. POS. GPMSBE SPST PRT NUMBER GPMSBE OFF MOM. SCHEMTIC Conn. Terms. OPEN -3 SPST GPMSBE ON MOM. Conn. Terms - -3 SPDT MOM. = Momentary Third ngle -78

79 GP Series Sealed Ultraminiature Switches PRT NUMBER GPMSCBE Conn. Terms MOM. = Momentary SWITCH FUNCTION POS. POS. ON MOM SPDT SCHEMTIC PC MOUNTING Terminal nos. for reference only. GPMSCBE SPDT NOTE: Recommended for infrequent use applications only For increased switch mounting strength, order, SV termination style with support bracket (see below). GPMSVBE SPST SWITCH FUNCTION POS. POS. PC MOUNTING GP MODELS PRT NUMBER SCHEMTIC GPMSVBE OFF MOM. Conn. Terms. OPEN -3 SPST GPMSVBE ON MOM. Conn. Terms. MOM. = Momentary - -3 SPDT Third ngle -79

80 GP Series Sealed Ultraminiature Switches For part numbers GPMSVBE, GPMSVBE.57 (4,00).079 (,00) TPE & REEL FEED DIRECTION ø0.059 (ø,50).069 (,76).99 (7,60) REEL INFORMTION OUTSIDE DIMETER 3.00 (330,0) PILOT HOLE.5 (3,0) QUNTITY PER REEL (,5).945 (4,00) GPMSVBE GPMSVBE For part numbers GPXXSBE, GPXXMSBE REEL INFORMTION OUTSIDE DIMETER 3.00 (330,0) PILOT HOLE.5 (3,0) QUNTITY PER REEL 600 For part numbers GPMSCBE REEL INFORMTION OUTSIDE DIMETER 3.00 (330,0) PILOT HOLE.5 (3,0) QUNTITY PER REEL 600 B Third ngle -80

81 PN Series lternate & Momentary ction Switches Features/Benefits Momentary or locking action Different actuation forces for customized feel Low cost, reliable contact design Single and double pole options RoHS compliant Typical pplications Computers and peripherals Instrumentation and measurement equipment Non-power, on-off switch applications Specifications CONTCT RTING: V DC max. ELECTRICL LIFE: 0,000 make-and-break cycles at full load. MECHNICL LIFE: 0,000 on/off cycles. CONTCT RESISTNCE: 30 mω max. initial INSULTION RESISTNCE: 00 MΩ min. DIELECTRIC STRENGTH: 500 V C min. OPERTING/STORGE TEMPERTURES: 0ºC to 60ºC. PCKGING: Switches are supplied in anti-static trays. Materials FRME: Tin plated steel. CTUTOR: P 66 black. BSE: Phenolic resin. TERMINLS: Silver plated brass. MOVBLE CONTCTS: Silver plated phosphor bronze. RETURN SPRING: SWC DETENT SPRING: Phosphor bronze. DETENT SPRING PLTE: Phosphor bronze. RETURN SPRING RETINER RING: Nickel plated steel. TERMINL SEL: Epoxy. Build--Switch To order, simply select desired option from each category and place in the appropriate box. For additional options not shown in catalog, consult Customer Service Center. P N 0 3 Q E Function SPDT Mom. SPDT Locking DPDT Mom. DPDT Locking ctuator* S.8 mm square tip L 3.3 mm x 3. mm tip ctuation Force** 50 g Typ B 00 g Typ D 80 g Typ E 50 g Typ F 00 g Typ H 50 g Typ J 350 g Typ Shorting/ Non-Shorting N Non-shorting S Shorting Frame Terminal Seal Contact Material * Note - The switch body style dimenions differ for each of these 3 groupings S actuator available for PN & PN options S actuator available for PN & PN options L actuator available for PN & PN options ** ctuation Force only available with PN with S actuator PN & PN available with cuation Force B, D, E, F, H, J PN & PN available with ctuation Force D, E, H, J Full travel -8

82 PN Series lternate & Momentary ction Switches PN SPDT Mom. PN SPDT Locking ± X X TYP PC MOUNTING PN DPDT Mom. with S ctuator PN DPDT Locking with S ctuator C LOCK STROKE TOTL TRVEL C CIRCUIT DIGRM C: COMMON PIN BOTTOM VIEW TERMINL NO X 0.6 6X TYP ± X PC MOUNTING.5.5 X.4 Third ngle -8 Dimensions are shown: mm

83 PN Series lternate & Momentary ction Switches PN DPDT Mom. with L ctuator PN DPDT Locking with L ctuator C TERMINL NO LOCK STROKE TOTL TRVEL 3. TYP ± TYP 6. 3 C CIRCUIT DIGRM C: COMMON PIN BOTTOM VIEW.6 PC MOUNTING 3. TYP 3 BUTTONS MUST BE ORDERED SEPRTELY. SHIPPED IN BULK. PE (.433) 5,9 (.3) PV 9,7 (.38), (.476) ø7,4 (.9) OPTION CODE COLOR 3.7 (.59) 7 (.76) RD GY BK WH Red Gray Black White PE and PV buttons fit L actuators Indexed G00 Black G00G Gray G00I Ivory G00R Red Rectangular G00 Black G00G Gray G00I Ivory G00R Red Round G003 G003G G003I G003R Black Gray Ivory Red Square G004 Black G004G Gray G004I Ivory G004R Red G00, G00, G003 and G004 buttons fit S actuators Third ngle -83

84 PHB Series Short Stroke Switches Features/Benefits Momentary or latching action Low cost, reliable contact design & 4 pole configurations Sealed contacts Optional buttons RoHS compliant Typical pplications Computers and peripherals Instrumentation and measurement equipment Non-power, on-off switch applications Specifications 5 V DC DIELECTRIC STRENGTH (50 Hz/ min.): 500 V DC between terminals or between terminals and frame for minute OPERTING LIFE: 0,000 cycles at rated load CONTCT RESISTNCE: 0 m Ωohms initial INSULTION RESISTNCE: 00 M Ωohms TOTL TRVEL/LTCHING TRVEL:.5mm (± 0.5 mm) /.5mm (± 0.5 mm) to latch EE option (push-push) OPERTING FORCE: U option: 70 grams ± 00 grams (.67 ± 0.98N) 4U option: 30 grams ± 00 grams (.6 ± 0.98N) OPERTING TEMPERTURE: -0 C to 60 C BOUNCE TIME: 0 ms SELING: Sealed contacts. PCKGING: Switches; PHB models: 84 pcs per tray; PHB4 models 7 pcs per tray Optional Caps; Bulk bag - 00 caps per bag Materials FIXED TERMINL: Brass, silver plated MOVBLE CONTCT: Phosphor bronze, silver plated COVER: P 66 Black COVER TO BSE RETINING CLIP: POM CTUTOR: POM RETURN SPRING: Stainless steel SPRING RETINING RING: Steel, nickel plate BSE: Phenolic resin TERMINL SEL: Epoxy. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build--Switch To order, simply select desired option from each category and place in the appropriate box. For additional options not shown in catalog, consult Customer Service Center. Switch P H B Contact rrangement U Changeovers 4U 4 Changeovers Mechanical Function O Momentary Termination EE Push-push TS Straight SN Kinked (plug in) Electrical Rating mp / 5 VDC Contacts / Timing (Blank) Shorting NS mp / 5 VDC Caps (order separately) INDEXED COLOR RECTNGULR COLOR ROUND COLOR SQURE COLOR G00 G00G G00 G00R BLCK GRY IVORY RED G00 G00G G00 G00R BLCK GRY IVORY RED G003 G003G G003 G003R BLCK GRY IVORY RED G004 G004G G004 G004R BLCK GRY IVORY RED 7 May 8-84

85 PHB Series Short Stroke Switches TERMINTION TS STRIGHT LTCH TRVEL EE OPTIONS DIM '' FULL TRVEL TYP SN KINKED (PLUG IN) TYP.5 TYP POLES MODEL NO. DIM '' CTION PHB4UEE,5 PUSH/PUSH 4 PHB4U0,5 MOMENTRY PHBUEE 5,0 PUSH/PUSH PHBU0 5,0 MOMENTRY ,7 FROM PCB 5.8 4X CRIMPED TERMINLS X 0 POLE 4 POLE.5 TYP.5 TYP POLE 4 POLE TYP Third ngle 7 May 8-85 Dimensions are shown: mm

86 PHB Series Short Stroke Switches Indexed G00 Black G00G Gray G00I Ivory G00R Red CPS Rectangular G00 Black G00G Gray G00I Ivory G00R Red Round G003 G003G G003I G003R Black Gray Ivory Red Square G004 Black G004G Gray G004I Ivory G004R Red Third ngle 7 May 8-86

87 F Series Switches Features/Benefits Up to 0 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection Digital equipment interface Medical equipment interface Specifications SWITCHING POWER: F module max. C/DC: Silver: 50 V/5W, Gold: V/300 mw. SWITCHING VOLTGE: F module max. C/DC: Silver: 5/30V, Gold: 50/30 V. SWITCHING CURRENT: F module max. C/DC: Silver: 0.5/0.5, Gold: 0.04/0.0. CRRYING CURRENT: Max at d87u = 0C: Silver: <, Gold: <0.5. DIELECTRIC STRENGTH (50 Hz, min.): Chassis/contact: ^500V Between contacts: ^500V. OPERTING LIFE O/EE (4V/00m): >0 5 operations GR : >3.5 x 04 operations. CONTCT RESISTNCE: Initial: Typical %0 mω, max. 0 mω fter operating life: %00 mω INSULTION RESISTNCE: ^0 9 Ω between open contacts, ^0 9 Ω between chassis and contacts. CPCITNCE (at f = 0 khz): %0.7 pf between contacts. TOTL TRVEL/LTCHING TRVEL: 4.7mm/3.3mm (.85 inch/.30 inch). ll models and options are RoHS compliant and compatible. NOTE: ll models and options are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. TYPICL F OPERTING FORCE: U: 6.5N (650 grams); 4U: 6.5N (650 grams); 6U: 7.5N (750 grams); 8U: 9.0N (900 grams); 0U: 9.0N (900 grams). EUROPEN TYPICL SF OPERTING FORCE: U: 3.5N±0.5N (350 grams±00 grams); 4U: 5N±N (500 grams±00 grams); 6U: 6.5N±N (650 grams±00 grams); 8U: 9.0N±N (900 grams±00 grams). OPERTING TEMPERTURE RNGE: -40 C to 70 C. Materials HOUSING: Polycarbonate UL 94V-0 or polyester UL 94V-0. CTUTOR: Polyester UL 94V-0. MOVBLE CONTCTS: Bimetal brass, silver plated, gold plate over nickel. STTIONRY CONTCTS & TERMINLS: Brass, silver plated, gold plated. TERMINL BORD: Polyester UL 94V-0. RETURN SPRING: Music wire. TERMINL SEL: RTV adhesive sealant. CHSSIS: Steel. LOCKOUT PIN: Steel. BLOCKERS: Steel. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -88 thru -95. For additional options not shown in catalog, consult Customer Service Center. If requesting only a switch, select either a North merican or European switch as noted below. Chassis and buttons are sold separately. If multiple stations are selected, we will assume all switches are the same unless noted otherwise. North merican Order Code - Switch Only Designation F F Series FLT Light touch F series ZF Central mounted F series Contact rrangement U PDT Mechanical Function 4U 4PDT O Momentary 6U 6PDT EE lternate (push-push) 8U 8PDT GR Interlock 0U OPDT OR Central release OSP Momentary with lockout GRSP Interlock with lockout Terminal Sealing (NONE) None TB Top/bottom Terminal Style (NONE) Solder lugs & PC pins 0 Cut solder lugs 0B Cut PC pins, for other configurations, consult factory Electrical Function (NONE) BBM Break-Before-Make M MBB (special) Make-Before-Break Contact Material (NONE) Silver, G U Gold Dress nut* *Central mounted F series only (NONE) No dress nut B Black C Chrome -87

88 F Series Switches European Order Code - Switch Only *Minimum order quantities apply. Designation SF F Series ZF Central mounted F series Contact rrangement U PDT Mechanical Function 4U 4PDT O Momentary 6U 6PDT EE lternate (push-push) 8U 8PDT GR Interlock Terminal Style (NONE) Solder lugs & PC pins LB Cut solder lugs PB Cut PC pins, for other configurations, consult factory Electrical Function (NONE) BBM Contact Material (NONE) Silver, G P Gold Dress nut* *Central mounted F series only (NONE) No dress nut B Black C Chrome Order Code - Buttons Solid Buttons Mechanical Indicator Buttons Style F0 FMR F0 FG* F FSC F3 FSD F4 FU F5 FSB F6 FE F9 F F F00 Button Color 0 Black 0 White 03 Red 04 Light gray *Button options for central mounting configurations, use FG for central mount with chrome dress nut, use F00 for central mount with black dress nut. Style F0 F00 F0 F0 F07 F0 F08 FO F F00* Shell Color 0 Black Out Position Color 0 Black In Position Color 0 White 06 Yellow 07 Blue 08 Green Orange BUTTON REMOVL button of a push-push switch should only be removed in the OFF non-latching position. Order Code - Chassis To order a switch with chassis, create the switch part number listed above and add the Chassis part number configurator information at the end of the part number. Note: We do not guarantee or recommend interlocking beyond 0 stations. C *Minimum order quantities apply. No. of Stations 0 thru 3 Comes with standard.094 (,4mm) mounting holes Note: Single station chassis available with special mounting configurations, consult factory. Spacing between Stations 00 Single station 0 0mm.5.5mm 5 5mm mm 0 0mm Special cknowledgements See note -88

89 F Series Switches FUEE CONTCT RRNGEMENT LENGTH DIM L SWITCHES WITH STNDRD OPTIONS U 0.87 (,00) 4U.300 (33,00) 6U.770 (45,00) 8U.40 (57,00) 0U.70 (69,00) ZFUEEBF0008 CONTCT RRNGEMENT LENGTH DIM L U 0.87 (,00) 4U.300 (33,00) 6U.770 (45,00) 8U.40 (57,00) 0U.70 (69,00) DESIGNTION Designation, North merica F F Series FLT Light touch F series ZF Central mounted F series Designation, Europe SF F Series ZF Central mounted F series Third ngle -89

90 F Series Switches CONTCT RRNGEMENT OPTION CODE NO. OF POLES SCHEMTIC U 4U PDT 4PDT X PC MOUNTING 6U 8U 0U 6PDT 8PDT 0PDT 3X 4X 5X MECHNICL FUNCTION North merica Europe OPTION CODE FUNCTION OPTION CODE FUNCTION O Momentary O Momentary EE lternate (push-push) EE lternate (push-push) GR Interlock GR Interlock OR Central release OSP Momentary with lockout GRSP Interlock with lockout TERMINL SELING (NONE) NO SEL TB TOP & BOTTOM FUEE shown in example above. NOTE: vailable for North merica only Third ngle -90

91 F Series Switches (NONE) SOLDER LUGS & PC PINS TERMINL STYLE 0 CUT SOLDER LUGS (North merica) LB CUT SOLDER LUGS (Europe).067 (.70) 0B CUT PC PINS (North merica) PB CUT PC PINS (Europe).079 (.0) ELECTRICL FUNCTION OPTION CODE (NONE) M FUNCTION BBM Non-shorting MBB Shorting (North merica only) CONTCT MTERIL NORTH MERIC OPTION CODE EUROPE OPTION CODE RoHS COMPLINT * RoHS COMPTIBLE * MTERIL RTING (NONE) (NONE) YES YES SILVER, G 50 V/5 W; 5/30 V; 0.5/0.5 U P YES YES GOLD V/300mW; 50/30 V; 0.04 /0.0 * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. DRESS NUT (NONE) NO DRESS NUT FOR F & F/LT DESIGNTIONS B BLCK C CHROME PNEL CUTOUT PNEL CUTOUT NOTE: vailable with ZF designation and FG button. NOTE: vailable with ZF designation and F00 buttons. Third ngle -9

92 F Series Switches STYLE F0 FMR SOLID BUTTON F0 FG STYLE COLOR F FSC F3 FSD F4 FU F5 FSB F6 FE F9 F F F00 OPTION CODE COLOR 0 BLCK 0 WHITE 03 RED 04 LT. GRY -9

93 STYLE F0 F00 MECHNICL BUTTON STYLE F0 F0 SHELL COLOR F Series Switches OUT POSITION COLOR IN POSITION COLOR F07 F0 F08 F0 F F00 SHELL COLOR 0 BLCK OUT POSITION COLOR 0 BLCK IN POSITION COLOR OPTION CODE COLOR 0 WHITE 06 YELLOW 07 BLUE 08 GREEN ORNGE -93

94 F Series Switches NUMBER OF STTIONS C00 Thru C0 CHSSIS Comes with standard (,44mm) mounting holes NOTE: Single station chassis available with mounting configurations, consult factory. SPCING 00 SINGLE STTION NO. OF STTIONS SPCING 0 0mm No. of Stations Dim..8 (30,0) Dim. B.48 (36,0) Tolerance (40,0).8 (46,00) (0,0) (50,0).363 (60,0).05 (56,0).599 (66,0) (70,03).993 (76,0) (80,0) (86,00) (90,0) (96,0) (00,03) 4.74 (06,0) (0,0) (6,00) mm No. of Stations Dim..00 (30,48) Dim. B.436 (36,47) Tolerance (4,98).98 (48,97) (,5) (55,47).676 (67,97).40 (6,47).9 (73,96) (80,49) (86,49) (9,99) (98,98) (05,49) (,48) (7,98) 4.88 (3,98) (30,48) (36,47) 0.05 Third ngle -94

95 F Series Switches SPCING 5 5mm No. of Stations 3 Dim..374 (34,90).969 (50,0) Dim. B.65 (4,0).05 (56,0) Tolerance CHSSIS NO. OF STTIONS SPCING (65,0).796 (7,0) (5,0) (80,0) (86,00) (95,0) (0,0) (0,03) (6,03) (5,0) 5.58 (3,0) (40,03) (46,0) (55,0) (6,0) mm No. of Stations Dim. Dim. B Tolerance.477 (37,5).73 (43,5) (55,0).40 (6,0) (75,5) 3.09 (78.5) (90,0) (96,0) (07,5) (3,5) (5,0) 5.58 (3,0) (4,5) (48.5) (60,0) (66,0) (77,5) 7.5 (83,5) mm No. of Stations Dim..575 (40,0) Dim. B.8 (46,00) Tolerance (60,0).599 (66,0) (80,0) (86,00) (00,03) 4.74 (06,0) (0,0) 4.96 (6,0) (40,00) (46,00) (60,0) (66,0) (80,0) 7.33 (86,00) (00,03) 8. (06,0) 0.05 Third ngle -95

96 NE-8 Series Mains / Power Switches Features/Benefits Chassis or panel mount Various buttons Various contact configurations RoHS compliant Typical pplications Mains/power switching Consumer electronics udio equipment Digital products UL6058- Specifications ELECTRICL RTING: NE8 Series: 8 GP, 5 VC, 50/60 Hz, E4, T70 6 GP, 50 VC, 50/60 Hz, E4, T70 6(4) RM, 50 VC, 50/60 Hz, E4, T70 6/48 RC, 50 VC, 50/60 Hz, E4, T70 R, 00 VDC, E4, T70 8R, 30VDC, E4, T70 NE8CTII Series: 4 GP, 50 VC, 50/60 Hz, E4, T70 4/48 RC, 50 VC, 50/60 Hz, E4, T70 R, 00 VDC, E4, T70 4R, 30VDC, E4, T70 DIELECTRIC STRENGTH (50 Hz, min.): 000 V OPERTING LIFE T MX. LOD ND T MX. INRUSH CURRENT: ^0 4 operations 5 ) CONTCT RESISTNCE: Initial: 50mΩ; fter 0 4 operations: 70mΩ. INSULTION RESISTNCE: ^0 Ωchassis nearest contact; ^0 Ωmains contact mains contact; ^0 Ωmains contact mains contact after 0 4 operations. LOW VOLTGE CONTCT: SWITCHING POWER MX.: W SWITCHING VOLTGE MX.: 4V SWITCHING CURRENT MX.: 0.5 TOTL TRVEL: 4.7mm (.85 inch) LTCHING TRVEL: 3.3mm (.30 inch) OPERTING FORCE: Without auxiliary low voltage contacts: NE8: 7N (700 grams); NE8CTII: 9.5N (950 grams). With auxiliary low voltage contacts: NE8: 8N (800 grams); NE8CTII: N (00 grams). SELING: Dust proof. Materials HOUSING, CTUTOR & TERMINL BORD: Thermoplastic polyester (UL 94V-0). MOVBLE CONTCT: Silver nickel alloy, silver plated. FIXED CONTCTS: Silver nickel alloy, silver plated. COMMON CONTCTS & TERMINLS: Copper alloy, silver plated. RETURN SPRING: Music wire. NOTE: ll models arer RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -97 thru -04. For additional options not shown in catalog, consult Customer Service Center. If requesting only a switch, select the switch as noted below. Buttons are sold separately. Designation NE8 NEB ZNE8 Cental mounted NEB Contact rrangement NE8 code # - see list Mechanical Function O Momentary EE lternate (push-push) Single Station Chassis 0 With.094 mounting holes (NONE) No chassis 0 With 4-40 tapped mounting holes 03 Special chassis (consult factory) -96 Dress nut* *Central mounted ZNE8 series only (NONE) No dress nut B Black C Chrome

97 NE-8 Series Mains / Power Switches Order Code - Buttons Solid Buttons Style F0 FMR F0 FG* F FSC F3 FSD F4 FU F5 FSB F6 FE F9 F F F00 Button Color 0 Black 0 White 03 Red 04 Light gray Mechanical Indicator Buttons Style F0 F00 F0 F0 F07 F0 F08 FO F F00* Shell Color 0 Black Out Position Color 0 Black In Position Color 0 White 06 Yellow 07 Blue 08 Green Orange *Button options for central mounting configurations, use FG for central mount with chrome dress nut, use F00 for central mount with black dress nut. BUTTON REMOVL button of a push-push switch should only be removed in the OFF non-latching position. NE838EE DESIGNTION & SWITCHES WITH STNDRD OPTIONS (0) 0.49 (,5) 0.7 (7,8).09 (7,8) (8,5) (,4) 0.3 (3,3) NE8 U (,55) (0) () (),5 ±0, (8) 0.36 (6) (4,8) 0.35 (8) 0.97 (5) (,5) (0) P P (R) (R) 0.36 (6) Third ngle -97

98 NE-8 Series Mains / Power Switches DESIGNTION & SWITCHES WITH STNDRD OPTIONS NE839EE PC MOUNTING NE846EE.4 (3,5) 0.8 (3) 0.57 (0,4) (4,8) 0.97 (5) (8) 0.35 (8) ) 0.3 (3,3) 0.36 (6,4) 0.05 (Ø,3) () (0) 0.36 (6) 0.36 (6) () ) ) (8,5) 0.8 (Ø3) 0.7 (7,8) 0.36 (6) 0.36 (6) (,4) Travel 3,4 (0.3) max. 4,7 (0.85) 0.59 (5) 0.7 (7,8).09 (7,8) Third ngle -98

99 NE-8 Series Mains / Power Switches DESIGNTION & SWITCHES WITH STNDRD OPTIONS ZNE838EECF00 PC MOUNTING Third ngle -99

100 NE-8 Series Mains / Power Switches CONTCT RRNGEMENT OPTION CODE Contact capacity and availability STYLE ELECTRICL CIRCUIT 37 NE8 X DPST 38 NE8 UX DPDT 5 U + NE8 X DPST* OPTION CODE Contact capacity and availability STYLE ELECTRICL CIRCUIT 46 NE8 USX DPDT 47 NE8 SP DPST 48 NE8 USP DPDT 5 (4/64) NE8CTII X DPST 39 U + NE8 UX DPDT* 4 NE8 P DPST 4 NE8 UP DPDT 43 NE8 W DPST 44 NE8 UW DPDT 45 NE8 SX DPST 49 NE8 SW DPST 50 NE8 USW DPDT 53 (4/64) U + NE8CTII X DPST 54 U + NE8 W DPST 55 U + NE8 P DPST 56 U + NE8 UW DPDT 57 U + NE8 UP DPDT * U + Denotes auxiliary set of low current contacts DPDT = DPST U = DPDT S = Snap-in mounting X = Solder lug/pc pins W = Solder lugs only P = PC pins only NOTES. Contact plating is silver on all Power Switches.. The electrical function is Break Before Make (BBM) on all Power Switches. 3. The terminals will be epoxy sealed. TYPE POSSIBLE CONTCT RRNGEMENT POWER CONTCTS UXILIRY CONTCTS CONTCT SPCING PROTECTION CLSS (CEE 4) PPROVLS NE8 U > 3mm (.8 inch) II UL6058- NE8 U U > 3mm (.8 inch) I UL6058- NE8CTII U > 3mm (.8 inch) II UL6058- ) = make contact, U = changeover contact ) With mains contacts: Mounting only by PC pins is not sufficient. MECHNICL FUNCTION OPTION CODE O EE FUNCTION Momentary lternate (push-push) Third ngle -00

101 NE-8 Series Mains / Power Switches SINGLE STTION CHSSIS 0 WITH.094 MOUNTING HOLES (NONE) NO CHSSIS 0 WITH 4-40 TPPED MOUNTING HOLES 03 SPECIL CHSSIS (CONSULT FCTORY) DRESS NUT (NONE) NO DRESS NUT B BLCK C CHROME PNEL CUTOUT PNEL CUTOUT NOTE: vailable with ZNE8 designation and F00 buttons. NOTE: vailable with ZNE8 designation and FG button. Third ngle -0

102 NE-8 Series Mains / Power Switches STYLE F0 FMR SOLID BUTTON F0 FG F FSC F3 FSD F4 FU F5 FSB F6 FE F9 F OPTION CODE COLOR 0 BLCK 0 WHITE 03 RED 04 LT. GRY Third ngle -0

103 NE-8 Series Mains / Power Switches STYLE F F00 SOLID BUTTON COLOR STYLE OPTION CODE COLOR 0 BLCK 0 WHITE 03 RED 04 LT. GRY BLCK/CHROME 09 (F03,F06 & F07 buttons only MECHNICL BUTTON STYLE SHELL COLOR OUT POSITION COLOR IN POSITION COLOR STYLE F0 F00 F0 F0 Third ngle -03

104 NE-8 Series Mains / Power Switches STYLE F08 F0 MECHNICL BUTTON SHELL COLOR IN POSITION COLOR STYLE OUT POSITION COLOR F F00 SHELL COLOR 0 BLCK IN POSITION COLOR OPTION CODE COLOR OUT POSITION COLOR 0 BLCK 0 WHITE 06 YELLOW 07 BLUE 08 GREEN ORNGE Third ngle -04

105 FP Series Sealed Ultra Miniature Switches Features/Benefits Vertical and right angle mount Extended operating life 50,000 cycles Optional caps Sealed against soldering and cleaning processes RoHS compliant Typical pplications Networking equipment Modems Reset functions Instrumentation Specifications CONTCT RTING: Max. 0.4 V (8 V DC or V C). ELECTRICL LIFE: 50,000 cycles. CONTCT RESISTNCE: V DC) 80 mω05 max. initial. INSULTION RESISTNCE: 500MΩ 500 V DC - minute. OPERTING TEMPERTURE: 0º05C to 80º05C. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9. PCKGING: Tray pack - 00 switches per tray. Caps (optional) - Bulk bag; 00 caps per bag. Materials MOVBLE CONTCTS: Base metal: Phosphor bronze Plating: Gold over nickel plate FIXED CONTCTS: Base metal: Brass Plating: Gold over nickel plate COVER: P66 - Black CTUTOR: PPS - Black BSE: PPS - Black SUPPORT BRCKET ( Terminal Style only): Steel with tin plate. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -06 thru -07. For additional options not shown in catalog, consult Customer Service Center. Designation FP SPST N.O. F P S P B T P ctuator Length SP Standard plunger 3.3mm Terminal Style C Vertical Right ngle Contact Plating B Gold over nickel plate Packaging TP Tray packaging Cap 00 No cap 0 White cap - bulk bagged 0 Black cap - bulk bagged 03 Red cap - bulk bagged -05

106 FP Series Sealed Ultra Miniature Switches C VERTICL SWITCH FUNCTION RIGHT NGLE MODEL NO. SWITCH FUNCTION POS. POS. 4.5 FP OFF MOM CONNECTED TERMINLS OPEN -3 STROKE KEY WY KEY WY 3 SCHEMTIC SPST EPOXY SEL (3) () TERMINL NO TERMINL NUMBER 7 (3) () (6) (4) (4) ND (6) RE SUPPORT TERMINLS EPOXY SEL CTUTOR LENGTH SP STNDRD PLUNGER 3.3MM 3.3 Third ngle -06 Dimensions are shown: mm

107 FP Series Sealed Ultra Miniature Switches C VERTICL TERMINL STYLE RIGHT NGLE 4 STROKE 4 EPOXY BOTH SIDES.54 4X EPOXY BOTH SIDES X 0.6 () (4) MOUNTING HOLE PTTERN MOUNTING HOLE PTTERN.54 5 CONTCT PLTING B GOLD OVER NICKEL PLTE PCKGING TP TRY PCKGING CPS OPTION CODE DESCRIPTION 00 NO CP 4± WHITE CP, BULK BGGED 0 BLCK CP, BULK BGGED.4±0.3.9± RED CP, BULK BGGED x45 CHMFER To purchase Caps separately without switch, please use these part numbers PRT # 798D D D03000 COLOR WHITE BLCK RED Third ngle Dimensions are shown: mm -07

108 P Series Industrial Switch Features/Benefits IP67 sealed,000,000 life cycle Illumination / non-illumination Multiple colored caps Threaded or snap-in mounting Caps available separately RoHS compliant Typical pplications Harsh environments Off-Road Industrial Medical Transportation Joystick control modules Gaming Military Specifications FUNCTION: SPST Momentary CONTCT RRNGEMENT: N.O. MOUNTING TYPE: Snap-in (no panel seal) Threaded body (hex nut, lock washer, and panel seal gasket provided) Torque spec for threaded body: Do not exceed 8-9 in-lbs ( N.m) Mechanical OPERTING LIFE:,000,000 cycles TOTL TRVEL:. ± 0. mm OPERTING POINT.55 ± 0.5 mm OVER TRVEL: 0.6 min. OPERTING FORCE: 4N ± N standard configuration; other force option N ± 0.5N VIBRTION: Hz 0g Max SHOCK: 60g ms sawtooth wave Electrical CONTCT RTING: 4 V DC resistive (500,000 cycles) 50 V DC resistive (500,000 cycles) 3 V C resistive (500,000 cycles) 5 V C resistive (,000,000 cycles) DIELECTRIC STRENGTH: 000 V C min. INSULTION RESISTNCE: G 500 VDC INITIL CONTCT RESISTNCE 50 mω max (without wire leads) BOUNCE TIME: <5 ms Materials HOUSING: PBT BSE: PBT CP: PBT CTUTOR: Illuminated: Clear polycarbonate Non-illuminated: PBT INTERNL SEL: Silicone rubber TERMINLS: Copper alloy, gold over silver plating MOVBLE CONTCT: Copper alloy, gold over silver plating TERMINL SEL: Epoxy WIRE LEDS: UL569 Black WG Operating Environment OPERTING TEMPERTURE: -40 C to 85 C (+05 C non-illuminated) ESD PROTECTION: 0 KV min. Process Environment SELING: IP67 for threaded body IP65 for snap-in version (no panel seal) Build--Switch To order, simply select desired option from each category and place in the appropriate box. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. P B E Designation P P Series Operating Force Newtons 4 4 Newtons ctuator Style D Dome / Convex C Concave E Extended Dome N None Please contact Customer Service for additional colors and paint / laser etched button options. ctuator Color 0 No Cap Black 3 Red 4 Orange 5 Yellow 6 Green 7 Blue 9 Gray Illumination 00 No LED* 0 Super White 0 Bi-color; Red (Green) 03 Red 05 mber 06 Green 07 Super Blue 08 Bi-color; mber (Green) * No LED available in short body only Bushing Style** S** Snap-in plastic T Threaded plastic Terminal Seal E Epoxy ll models are epoxy sealed Contact Material B Gold Termination Z Solder Lug W Wire Leads WG C*** PC Terminals ** No panel seal option *** PC terminals not available with illumination Contact Customer Service for additional hardware options. -08

109 P Series Industrial Switch ø 7,40 [0.685] ø,35 [0.486] 4,0 [ 0.65 ] 8,00 [.0 ],50 [ ] STNDRD VIEW 0,90 [ 0.49 ] 3,90 [ 0.54 ] 8,80 [ ] ELECTRICL SCHEMTIC ,74 [ ] 4,50 [ 0.77 ] 5,45 [ 0.5 ] SPST-NO SEE SCHEMTIC OPERTING FORCE OPTION CODE OPERTING FORCE N, 00 g 4 4 N, 400 g CTUTOR STYLE D DOME / CONVEX E EXTENDED DOME C CONCVE 3,54 [ 0.40 ] TYP 3,54 [ 0.40 ] TYP 0,65 [ 0.06 ] 7,74 [ ] TYP 7,74 [ ] TYP 8,9 [ 0.33 ] TYP 3,99 [ 0.57 ] TYP,64 [ ] TYP,64 [ ] TYP,09 [ 0.08 ] TYP DOWN POSITION CTUTOR COLOR OPTION CODE CTUTOR COLOR 0 No Cap Black 3 Red 4 Orange 5 Yellow 6 Green 7 Blue 9 Gray For additional colors please contact Customer Service. Third ngle Dimensions are shown: mm (inches -09

110 P Series Industrial Switch ILLUMINTION OPTION CODE ILLUMINTION TYPE 00 Model without illumination 0 LED Super White 0 LED Bi-Color Red (Green) 03 LED Red 05 LED mber TYPICL INTENSITY* MIN MX (mcd) N/ 4,000 5, PEK WVELENGTH (nm) N/ N/ 635/ Vf Forward Voltage LED Green LED Super Blue 800, LED Bi-Color mber (Green) /565.0 *LED FORWRD CURRENT: 0 m LED FORWRD VOLTGE: see chart above LED REVERSE VOLTGE: 5.0 V MX * For information on specific and custom LED, please contact Customer Service. NOTE: For bi-color LED s the polarity must be reversed to alternate the color + node - Cathode 3 4 BUSHING STYLE S SNP-IN 7,74 [ ] 8,00 [.0 ] 0,5 [ ] 7,75 [ ] 4,00 [ ] 6,5 [ ] SNP-IN WITH ILLUMINTION,50 [ ] SNP-IN NO ILLUMINTION,50 [ ] T THREDED PLSTIC M3 X.5-6g M3 X.5-6g THREDED WITH ILLUMINTION 0,85 [ ] THREDED NO ILLUMINTION 0,85 [ ] PNEL CUTOUT ø B PNEL THICKNESS DIM (± 0.05 mm) DIM B (± 0.05 mm) mm [0.039 in] mm [0.079 in] 3 mm [0.8 in] THREDED BODY MIN PNEL THICKNESS mm 3.70 mm [0.539 in] 3.80 mm [0.539 in] 3.90 mm [0.547 in] 3.70 mm [0.539 in] 3.00 mm [0.5 in] 3.00 mm [0.5 in] 3.0 mm [0.56 in] 3.00 mm [0.5 in] Third ngle 0.mm min. chamfer on the leading edge of the mounting hole is recommended for snap-in version. -0 Dimensions are shown: mm (inches)

111 P Series Industrial Switch TERMINTION Z SOLDER LUG 0,50 TYP [0.00],83 TYP [0.] 3,90 [0.54] LED TERMINL NODE (+) 6,44 TYP [0.54],83 TYP [0.],75 [0.08] LED TERMINL CTHODE (-) 0,75 TYP [0.030] 0,50 TYP [0.00] LED TERMINL NODE (+),04 TYP [0.080] * Switching terminals are gold and LED terminals are silver LED TERMINL CTHODE (-) C PC TERMINLS 5,65 TYP [0.] *** Illumination not available with PC Terminals,50 TYP [0.098] 0,50 [0.00] 0,70 [0.08] 5,65 TYP [0.] 5,70 [0.4] X ø,00 [0.039] PCB HOLE PTTERN BORD VIEW W WIRE LEDS WG 34,78 TYP [.369] 7,04 TYP [.065] 8,44 TYP [.0] 0,69 TYP [0.85] WIRE LEDS WITH POTTED BSE, SNP-IN ILLUMINTION ø, [0.437] 304,8 [.000] WIRELEDS WG STD WIRE LEDS WITH POTTED BSE, SNP-IN NO ILLUMINTION ø, [0.437] 304,8 [.000] WIRELEDS WG STD WIRE LEDS WITH POTTED BSE, THREDED ILLUMINTION Wires: Black wires - Terminals Red wires - LED (+) Positive White wire - LED (-) Negative 304,8 [.000] WIRELEDS WG STD WIRE LEDS WITH POTTED BSE, THREDED NO ILLUMINTION 304,8 [.000] WIRELEDS WG STD Third ngle - Dimensions are shown: mm (inches

112 P Series Industrial Switch B GOLD E EPOXY ll models are epoxy sealed CONTCT MTERIL OPTION CODE B CONTCT MTERIL Gold TERMINL SEL HRDWRE LOCK WSHER Part Number 647D00000 ø7.5 HEX NUT Part number 55D REF ø5.90 M3 X.5-6H PNEL SEL Part Number 655D X See Detail 4X R 0.3 REF 0.56 REF Detail Scale 5: ø 7.00 X ø 4.60 X ø 6.30 ø 3.80 Caps available on next page Third ngle - Dimensions are shown: mm (inches)

113 P Series Industrial Switch VILBLE CPS 48D XX XXX Cap Color Style OPTION CP COLOR 0 WHITE 0 BLCK 03 RED 04 ORNGE 05 YELLOW 06 GREEN 07 BLUE 08 BROWN 09 GRY PRT NUMBER HOLE STYLE 48DXX000 NO DOME 48DXX00 YES DOME 48DXX00 NO EXTENDED DOME 48DXX003 YES EXTENDED DOME 48DXX004 NO CONCVE 48DXX005 YES CONCVE DOME ø.35 ø 3.00 THRU HOLE 48DXX000 = NO HOLE 48DXX00 = HOLE EXTENDED DOME ø.35 ø 3.00 THRU HOLE 48DXX00 = NO HOLE 48DXX003 = HOLE CONCVE 48DXX004 = NO HOLE 48DXX005 = HOLE ø.35 ø 3.00 THRU HOLE Third ngle -3 Dimensions are shown: mm (inches)

114 PB Series Backlit Switch Features/Benefits IP67 sealed,000,000 life cycle Illumination Threaded or snap-in mounting RoHS compliant Typical pplications Harsh environments Off-Road Industrial Medical Transportation Joystick control modules Gaming Military Specifications FUNCTION: SPST Momentary CONTCT RRNGEMENT: N.O. MOUNTING TYPE: Snap-in (no panel seal) Threaded body (hex nut, lock washer, and panel seal gasket provided) Torque spec for threaded body: Do not exceed 8-9 in-lbs ( N.m) Mechanical OPERTING LIFE:,000,000 cycles TOTL TRVEL:. ± 0. mm OPERTING POINT.55 ± 0.5 mm OVER TRVEL: 0.6 min. OPERTING FORCE: 4N ± N standard configuration; other force option N ± 0.5N VIBRTION: Hz 0g Max SHOCK: 60g ms sawtooth wave Electrical CONTCT RTING: 4 V DC resistive (500,000 cycles) 50 V DC resistive (500,000 cycles) 3 V C resistive (500,000 cycles) 5 V C resistive (,000,000 cycles) DIELECTRIC STRENGTH: 000 V C min. INSULTION RESISTNCE: G 500 VDC INITIL CONTCT RESISTNCE 50 mω max (without wire leads) BOUNCE TIME: <5 ms Materials HOUSING: PBT BSE: PBT CP: Painted polycarbonate CTUTOR: Illuminated: Clear polycarbonate INTERNL SEL: Silicone rubber TERMINLS: Copper alloy, gold over silver plating MOVBLE CONTCT: Copper alloy, gold over silver plating TERMINL SEL: Epoxy WIRE LEDS: UL569 Black WG Operating Environment OPERTING TEMPERTURE: -40 C to 85 C ESD PROTECTION: 0 KV min. Process Environment SELING: IP67 for threaded body IP65 for snap-in version (no panel seal) Build--Switch To order, simply select desired option from each category and place in the appropriate box. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. P B E B E Designation PB PB Series Operating Force Newtons 4 4 Newtons Cap E Extended Dome (600E) Illumination 0 Super White 07 Super Blue Bushing Style S Snap-in plastic T Threaded plastic Terminal Seal E Epoxy Contact Material B Gold Termination Z Solder Lug W Wire Leads WG Cap Symbol 000 Painted black over white without symbol* 00 Plus 00 Locked 003 Engine stop 004 Park brake release 005 Engine start 006 Fast 007 Slow 008 Unlocked 009 Rock shaft lower 00 Minus * cap painted black over white to allow customer laser etching Oct 6-4

115 PB Series Backlit Switch X 7,5 [.95] X 4 [.57] X,8 [.07] 7,95 REF [.00] 7,4 [.685],35 [.486] 7,6 [.99] 5,7 [.4] DOWN POSITION 0,35 [.80] SNP-IN,5 [.059] 3 THREDED M3 X.5-6g 4 SEE SCHEMTIC 0,85 [.033] ELECTRICL SCHEMTIC PNEL CUTOUT 3 4 B SPST-NO-DB PNEL THICKNESS DIM ( 0.05 MM) DIM B ( 0.05 MM) MM [0.039 IN] MM [0.079 IN] 3 MM [0.8 IN] THREDED BODY MIN PNEL THICKNESS MM 3.70 MM [0.539 IN] 3.80 MM [0.539 IN] 3.90 MM [0.547 IN] 3.70 MM [0.539 IN] 3.00 MM [0.5 IN] 3.00 MM [0.5 IN] 3.0 MM [0.56 IN] 3.00 MM [0.5 IN] 0. MM MIN CHMFER ON THE LEDING EDGE OF MOUNTING HOLE IS RECOMMENDED FOR SNP-IN VERSION. Third ngle Oct 6-5

116 PB Series Backlit Switch TERMINTION W WIRE LEDS Z SOLDER LUG WIRE LEDS WITH POTTED BSE, SNP-IN ILLUMINTION 34,78 TYP [.369] 7,04 TYP [.065], [.437] 304,8 ± 6,35 (.00 ±.5) Wire Leads WG STD 0,5 TYP [.00],83 TYP [.] 4 [.57],83 TYP [.] LED TERMINL CTHODE (-) 0,75 TYP [.030] 6,44 TYP [.54],75 [.08] LED TERMINL NODE (+) WIRE LEDS WITH POTTED BSE, THREDED ILLUMINTION LED TERMINL CTHODE (-) 0,5 TYP [.00] 304,8 ± 6,35 (.00 ±.5) WIRES: BLCK - TERMINLS RED - LED (+) POSITIVE WHITE - LED (-) NEGTIVE Wire Leads WG STD LED TERMINL NODE (+) 5,65 TYP [.],04 TYP [.080] CONTCT MTERIL B GOLD OPTION CODE B CONTCT MTERIL Gold TERMINL SEL E EPOXY ll models are epoxy sealed Third ngle Oct 6-6

117 PB Series Backlit Switch CP SYMBOLS -000 NO SYMBOL -006 FST -00 PLUS -007 SLOW PNEL CUTOUT -00 LOCKED -008 UNLOCKED B -003 ENGINE STOP -009 ROCK SHFT LOWER Panel Orientation Flat indicates bottom -004 PRK BRKE RELESE -00 MINUS See chart on previous page for dimensions -005 ENGINE STRT NOTES:. LL GRPHICS MUST BE POSITIONED S SHOWN, PERPENDICULR TO LIGNMENT FETURE ON UNDERSIDE OF CP.. GRPHIC MRKING MUST BE LIGNED WITH THE FLT FETURE ON THE UNDERSIDE OF THE CP S SHOWN, TOLERNCE 3 HRDWRE LOCK WSHER Part Number 647D00000 ø7.5 HEX NUT Part number 55D REF ø5.90 M3 X.5-6H PNEL SEL Part Number 655D X See Detail 4X R 0.3 REF 0.56 REF Detail Scale 5: ø 7.00 X ø 4.60 X ø 6.30 ø 3.80 Third ngle Oct 6-7

118 HP Series Hall Effect Switch Features/Benefits IP68 sealed 0,000,000 life cycle Multiple colored caps Redundant output available Typical pplications Harsh environments Off-Road Industrial Medical Transportation Joystick control modules Gaming Military Specifications FUNCTION: Linear output (See chart on next page) MOUNTING TYPE: Front mount, Rear mount Mechanical MECHNICL TRVEL: 0.50 (3.8mm) SHOCK: 60g ms sawtooth wave VIBRTION: 0-500Hz 0g max. Electrical SUPPLY VOLTGE: 5 ± 0.5 VDC SUPPLY CURRENT: 0m max. OUTPUT CURRENT: m max. OUTPUT VOLTGE: Programable from V ESD PROTECTION: 6kV per EI-545 Materials CSE / BUSHING: nodized luminum INSIDE HOUSING: PBT CP: PBT CTUTOR: PBT Operating Environment OPERTING TEMPERTURE: -40 C to 85 C OPERTING LIFE: 0,000,000 cycles SELING: IP68S NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build--Switch To order, simply select desired option from each category and place in the appropriate box. H P Designation HP HP Series Bushing / Mounting Style Front mount, 5/8-4 thread Rear mount, 5/8-4 thread 3 Rear mount, 5/3-3 thread Cap Style ø.65 Dome (front mount only) ø.370 Flat Sensor Configuration S Single Output D Please contact Customer Service for additional options. Dual Output, Output mirrors Output (see figure ) Output Voltage Code V=.0V, V= 4.0V V= 4.0V, V=.0V 3 V= 0.5V, V= 4.5V 4 V= 4.5V, V= 0.5V ctuation Force S.7lb (N) Hardware 0 No hardware Plated hardware (STD) Stainless hardware Bushing Finish Clear anodize Black anodize (STD) Cap Color White Black (STD) 3 Red 4 Orange 5 Yellow Termination Style W wire leads, WG XLPE (6 WG for Dual Output) -8

119 HP Series Hall Effect Switch STNDRD VIEW.50 [ 3, ].75 [ 8,4 ].65 [ 5,88 ] 5/8-4 UNEF.580 [ 4,73 ] HP.50 [ 6,35 ].875 [,3 ].370 [ 9,4 ].50 [ 6,35 ].875 [,3 ].370 [ 9,4 ].50 [ 6,35 ].60 [ 5,75 ].370 [ 9,4 ].87 [ 4,75 ] 5/8-4 UNEF.49 [ 0,64 ] 5/8-4 UNEF.35 [ 8,6 ] 5/3-3 UNS.663 [ 6,84 ].43 [ 0,95 ].803 [ 0,4 ] HP HP HP3 FIGURE - SCHEMTIC n F GND OUTPUT VOLTGE (V) V V FIGURE : OUTPUT VOLTGE OUTPUT OUTPUT 0.50 OUT 4. 7 n F 4. 7 OUT VDD GND 4. 7 n F 4. 7 n F PIN -GND, BLCK PIN -VDD, RED PIN 3-OUT, YELLOW PIN 4-GND, GREEN PIN 5-VDD, PURPLE PIN 6-OUT, BLUE CTUTOR TRVEL (IN) VDD DUL OUTPUT ONLY Third ngle -9

120 NP Series Sealed Industrial Switch Features/Benefits IP68 sealed,000,000 life cycle Multiple housing styles Capable of up to 5 resistive load Wirelead options available RoHS compliant Typical pplications Harsh environments Off-Road Industrial Transportation Military Specifications Electrical (cont.) FUNCTION: SPDT Double Break (Form Z) Momentary DIELECTRIC STRENGTH: 000 V C for min. CONTCT RRNGEMENT: N.O. and N.C. MOUNTING TYPE: Threaded front or rear mount and slot mount INSULTION RESISTNCE: G 500 VDC TORQUE SPEC FOR THREDED BODY: Do not exceed 50 in-lbs INITIL CONTCT RESISTNCE 50 mω max (without wire leads) (5.65 N-m) BOUNCE TIME: <5 ms Mechanical OPERTING LIFE:,000,000 cycles TOTL TRVEL:.6 ± 0.5 mm OPERTING POINT 0.9 ± 0.5 mm OVER TRVEL: 0.45 min. OPERTING FORCE: 8N ±.5N VIBRTION: Hz 0g Max SHOCK: 50g ms sawtooth wave Electrical CONTCT RTING: Option G - Gold over Silver 0m/5 VDC (,000,000 cycles) Option Q - Silver /3 VDC resistive (00,000 cycles) 5/3 VDC resistive (5,000 cycles) 3/3 VDC resistive (5,000 cycles) Materials HOUSING: 606-T6 luminum, black or clear anodized BSE: PBT CP: PBT CTUTOR: PBT INTERNL SEL: Silicone rubber TERMINLS: Copper with silver nickel inlay, silver plating MOVBLE CONTCT: Copper alloy, gold over silver plating TERMINL SEL: Epoxy Operating Environment OPERTING TEMPERTURE: -40 C to +85 C ESD PROTECTION: 5KV min. Process Environment SELING: IP68 NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build--Switch To order, simply select desired option from each category and place in the appropriate box. N P 8 E Designation NP NP Series Operating Force 8 8 Newtons * Please contact Customer Service for additional colors. ctuator Style S Standard E Extended (D housing style only) ctuator Color* Black (STD) 3 Red 4 Orange 5 Yellow 9 Gray Housing Style T Standard threaded mount L Long threaded mount H Short threaded mount S Slot mount R Rear mount D Dome bezel P Tapered bezel Terminal Seal E Epoxy ll models are epoxy sealed Contact Material Q Silver (STD) G Gold over silver Termination 03 Solder Lug (STD) 0 PC Pin (G Contact Material) W4 4x WG UL569 wire (overmolded) W3 3x WG UL569 wire (overmolded) Housing nodizing Color Clear anodized Black anodized (STD) -0

121 NP Series Sealed Industrial Switch 0.0REF [0.79] 9.00 [0.354] 6.60 [0.60] 5/3-3 UNS [0.00] MX STNDRD VIEW.90 [0.469].00 [0.039] 5.39 [0.].30 TYP [0.445] ELECTRICL SCHEMTIC N.C. 3 4 N.O. 0.40TYP [0.06].60 TYP [0.0] 0.40 TYP [0.06] 0.80 [0.45] CROSS FLTS OPERTING FORCE OPTION CODE OPERTING FORCE 8 8 N CTUTOR STYLE S STNDRD E EXTENDED (D HOUSING STYLE ONLY).60 [0.0] 7.0 [0.83] 4.55 [0.79] 9.5 [0.360] CTUTOR COLOR OPTION CODE CTUTOR COLOR Black 3 Red 4 Orange 5 Yellow 9 Gray For additional colors please contact Customer Service. Third ngle - Dimensions are shown: mm (inches)

122 NP Series Sealed Industrial Switch HOUSING STYLE T STNDRD THREDED MOUNT.60REF [0.890] 3.60 TYP [0.54] 0.0REF [0.79] 9.00 [0.354] 6.60 [0.60] 5/3-3 UNS [0.00] MX.90 [0.469].00 [0.039] 5.39 [0.].30 TYP [0.445] 0.70 TYP [0.08] PC TERMINLS.70 TYP [0.06] 0.40TYP [0.06] 0.80 [0.45] CROSS FLTS.60 TYP [0.0] 0.40 TYP [0.06] X65.0 N.O. N.C. N.O [0.3] [0.95] EPOXY SELED N.C. ( & ) SCLE 9: N.O. (3 & 4) SCLE 9: 4X 0.90 [0.035] N.C. PC HOLE PTTERN BORD VIEW X.67 REF [0.066] X 3.58 REF [0.4] 3.95 [0.549] 4.50 [0.77] 7.50 [0.95] 4.00 [0.079] TYP.00 [0.433] PNEL CUTOUT.30 [0.484] L LONG THREDED MOUNT 5.75 [0.60] X.0 [0.087] X 3.05 [0.0].90 [0.469].0 [0.040] 9.50 [0.374] 6.60 [0.60].50 [0.059] 7.0REF [.07] 7.70 TYP [0.697] 4.70REF [0.97] 5/3-3 UNS [0.00] MX 9.55 [0.376] 5.40 TYP [0.606] 4.90 [0.9] X.67 REF [0.066] 0.70 TYP [0.08] PC TERMINLS 7.90 [0.3] X65.0 N.C. N.O. N.O. N.C..70TYP [0.06] 4X 0.90 [0.035] PC HOLE PTTERN BORD VIEW X 3.58 REF [0.4].35 [0.447] TNGENT TO FLT 0.40 TYP [0.06] [0.77] 7.50 [0.95] N.C [0.95] N.O..90 [0.469].00 [0.079] TYP.60TYP [0.0].65 [0.459] PNEL CUTOUT 0.40TYP [0.06].3 [0.484] Third ngle - Dimensions are shown: mm (inches)

123 NP Series Sealed Industrial Switch HOUSING STYLE H SHORT THREDED MOUNT 5.75 [0.60] X 3.05 [0.0] X.0 [0.087].90 [0.469].0 [0.040] 9.50 [0.374] 6.60 [0.60].50 [0.059].60REF [0.890] 3.0 [0.56] 0.0REF [0.79] 0.50 [0.00] MX 5/3-3 UNS [0.9] 0.80 [0.43] 4.90 [0.93].70 [0.06] 0.70 TYP [0.08] PC TERMINLS 0.40 TYP [0.06] 7.50 [0.95] N.C..60 [0.0].65 [0.459] 0.40 [0.06] X.67 [0.066] REF 7.90 [0.3] 65.0 N.C. N.O. N.O. N.C [0.035] X.67 [0.066] REF.35 [0.447] TNGENT TO FLT [0.77] 7.50 [0.95] N.O..00 TYP [0.079].90 [0.469].30 [0.484] PNEL CUTOUT PC HOLE PTTERN BORD VIEW S SLOT MOUNT.90 [0.469].60REF [0.890] 4.90TYP [0.93] 0.70 TYP [0.08] PC TERMINLS 3.0 TYP [0.56].70TYP [0.06] 0.0REF [0.79] 0.40 TYP [0.06] 7.50 [0.95] N.C [0.374] 0.80 TYP [0.45] 6.60 [0.60].60TYP [0.0].50 [0.059] 0.40TYP [0.06] 3.40 [0.34].90 [0.469] 4.40 [0.73] X65.0 N.O. N.C [0.3] [0.95] N.O. X.67 REF [0.066] 4X 0.90 [0.035] N.C. N.O. PC HOLE PTTERN BORD VIEW X 3.58 REF [0.4].00TYP [0.079] 4.50 [0.77].90 [0.469] CROSS FLTS 5.85 [0.64] Third ngle -3 Dimensions are shown: mm (inches)

124 NP Series Sealed Industrial Switch R RER MOUNT HOUSING STYLE 0.85 [0.47] CROSS FLTS 4.30 [0.563] 7.75 [0.305].5 [0.085] 0.5 REF [0.808] 9.75 TYP [0.384] 0.70 TYP [0.08] X.67 REF [0.066] X 65.0 PC TERMINLS N.C. N.O. N.O. N.C. PC HOLE PTTERN BORD VIEW.0 [0.047] 4.90TYP [0.93].70TYP [0.06] 4X 0.90 [0.035] 7.90 [0.3] X 3.58 REF [0.4] 8.0 REF [0.709].40TYP [0.094].00 [0.079] 4.50 [0.77] 0.40 TYP [0.06] 7.50 [0.95] N.C. 8.6 [0.339].60TYP [0.0] 7.50 [0.95] N.O. 8.5 [0.3] 5/3-3 UNS-.00 [0.433] PNEL CUTOUT 0.50 [0.00] MX 0.40TYP [0.06].30 [0.484] 0.77 [0.44] 7.45 TYP [0.93] D DOME BEZEL.65 [0.459] 7.50 [0.689].30 [0.484] PNEL CUTOUT.90 [0.469].45 [0.096] 0.50 [0.00] MX 7.05 [0.78] 0.65 REF [0.83] 3.60 TYP [0.535] 0.70 TYP [0.08] 4.90 [0.93].70TYP [0.06] 8.5 REF [0.75] 0.40 TYP [0.06] 5.45 [0.5] 5/3-3 UNS [0.06].30 TYP [0.445] PC TERMINLS 4.40 [0.73] X.67 REF [0.066] X65.0 N.C. N.O. N.O. N.C. PC HOLE PTTERN BORD VIEW 4X 0.90 [0.035] 7.90 [0.3] X 3.58 REF [0.4].35 [0.447] TNGENT TO FLT [0.95] N.C [0.95] N.O..00 TYP [0.079] EXTENDED CP Third ngle -4

125 NP Series Sealed Industrial Switch P TPERED BEZEL 0.5REF [0.808] 5/3-3 UNS TYP [0.608] 8.0 REF [0.709] HOUSING STYLE 0.00 [0.394] 7.75 [0.305] 5.07 [0.00] 7.30 [0.88] 0.50 [0.00] MX.5 [0.085] 3.5 TYP [0.58] 4.90 [0.93] 0.70 TYP [0.08].70 [0.06] PC TERMINLS 0.40 TYP [0.06] 0.80 [0.45].60TYP [0.0] TYP [0.45] [0.06] X65.0 N.O. 4X 0.90 [0.035] N.C. N.C. N.O. PC HOLE PTTERN BORD VIEW 7.90 [0.3] X.67 REF [0.066] X 3.58 REF [0.4] [0.079] TYP 7.50 [0.95] N.C. 4.7 [0.56] 0.80 [0.45] CROSS FLTS 7.50 [0.95] N.O [0.77].00 [0.433] PNEL CUTOUT.30 [0.484] HOUSING NODIZING COLOR OPTION CODE NODIZING COLOR Clear anodized Black anodized (STD) TERMINTION 03 SOLDER LUG (STD) 0 PC PIN (G CONTCT MTERIL).45 TYP [0.096] 0.5 TYP [0.00] 0.70 TYP [0.08].55 TYP [0.00] Third ngle -5

126 NP Series Sealed Industrial Switch TERMINTION 30.80±.70 [.9±0.50] 4.70 [0.579] REF 6.55 [0.65] REF 4.0 [0.559] REF 9.65 [0.380] REF 8.80 [0.740] REF 4.70 [0.579] 4.70 [0.579] REF 3 OR 4 WIRES WG UL569 (SEE SCHEMTICS) W3 3X WG UL569 WIRE (OVERMOLDED) W4 4X WG UL569 WIRE (OVERMOLDED) BLCK COMMON ELECTRICL SCHEMTIC - 3 WIRES 3 4 RED N.C. WHITE N.O. ELECTRICL SCHEMTIC - 4 WIRES RED N.C. WHITE N.O. 3 4 RED N.C. WHITE N.O. CONTCT MTERIL OPTION CODE Q G CONTCT MTERIL Silver (STD) Gold over Silver TERMINL SEL E EPOXY ll models are epoxy sealed HEX NUT Nickel-plated LOCKWSHER HRDWRE PNEL GSKET 85D0000 5/3-3 UNS-B THD 5.06 [0.593].00 [0.47] 4.7 [0.558] CROSS FLTS. [0.477] 4.00 [0.55] 0.0 CHMFER SIDES.98 [0.078] 0.89 [0.035] 0.53 [0.0] 0.56 [0.0] Third ngle -6 Dimensions are shown: mm (inches)

127 PB Series Illuminated Features/Benefits Illuminated display Small size Cold lighting Tactile feed back Typical pplications vionics Mechanical CTUTION FORCE: 5,5 N ± 0,5 N MXIMUM FORCE: 80 N TRVEL TO CONTCT:, ± 0, mm OVERTRVEL: >0,3 mm TOTL TRVEL:,5 ± 0, mm LIFE EXPECTNCY: 0 6 operations 8 V - 0 m WEIGHT: grams VIBRTION: ± 0,45mm from 33 Hz to 75 Hz CCELERTION: 0 g max Electrical CONTCTS: Gold plated VOLTGE: Max 00 V - Min 0 mv DC CRRYING CURRENT: Max 50 m - Min 50 µ SWITCHING CURRENT: Max 50 m - Min 50 µ MX SWITCHING POWER: W CONTCT RESISTNCE: < 50 Ω DIELECTRIC STRENGTH: 500 V rms INSULTION RESISTNCE (00 V): > 5000 M Ω BOUNCE: < 3 ms SWITCHING OF POLES MTCHING: < 0 ms Environmental Data STORGE TEMPERTURE: -55 C TO 85 C OPERTING TEMPERTURE: -30 C TO 85 C TEMPERTURE OF KEY TO CP: < mbiant +5 C HUMIDITY TEST: days (-40 C - 93% HR) LTITUDE PRESSURE: From 0 hpa to 070 hpa Soldering Data WVE SOLDERING: 60 C / 5s MNUL SOLDERING: 350 C / s SELING: ccording to IP64 Plastic Material Housing and Cap: UL-94 V0 NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build--Switch To order, simply select desired option from each category and place in the appropriate box. P B Repeat sequence for nd Marking Designation PB PB Series Size 9,5 x 4,5 x x 4 LED Supply or Type C lternative DC Direct XX for each marking Display Type :6 LEDs in parallel Marking Location for direct current H High LED Non-Illuminated LED Illuminated M Middle Text Marking White LED Color L Low N Background Black Black Type of Marking T Text / Legend Text Marking Not visible LED Color S S Status Indicator Background Black Black LED Color Text Marking White LED Color 0 White l R Background Red Red Green l 560 nm Text Marking Green Green Yellow Green l 568 nm G Background Black Black 3 mber l 590 nm 4 Red l 660 nm 5 Other l 6 sept 6-7 Dimensions are shown: mm (inches)

128 PB Series Illuminated LIGHTING DT The legends of function and the status indicator can be illuminated separately. I M mber Color mber Green Wave Length 586 < l < < l < 560 Current Max 80 m 80 m Chromaticity X Y 0,54 < X < 0,58 0,40 < Y < 0,44 0,30 < X < 0,40 0,6 < Y Contrast Min., 0,85 For other colors and displays, please contact Customer Service. I M L cd/m Green L cd/m LIGHTING / CURRENT DIMENSIONS (applicable for any size),5,5 x 45 (3,) 0,5 B TRVEL,5 FRONT PNEL O RING 0,5 8,9 5,5 C PCB 9,5 X 4,5 X 4 4 X 4 Tolerance: ± 0, mm B 9,5,5 4 C,5 5,5 0,5-8 Dimensions are shown: mm

129 PB Series Illuminated LED MODULE 3 4 LED MODULE LYOUT SOLDERING SIDE STTUS INDICTOR TEXT/LEGEND UPPER LED MODULE LED MODULE 3 4 LED MODULE LED MODULE MIDDLE OR LOWER LED MODULE LED MODULE LED MODULE PCB Layout SOLDERING SIDE 8 Pads Ø 8 Pads Ø 0 Holes Ø 0 Holes Ø,54 7,6 3,8 0,6 TOLERNCE: ± 0,,54,54,54 PPLICBLE FOR SIZE - 9,5 x 4 mm -,5 x 4 mm,54,54,54 PPLICBLE FOR SIZE -4 x 4 mm TCTILE EFFECT N 6-5, N =,60? TRVEL TRVEL TO CONTCT:, ± 0, mm OVERTRVEL: > 0,3 mm TOTL TRVEL:,5 ± 0, mm ,5 3 mm FORCE CTUTOR FORCE: 5,5 N ± 0,5 N TCTILE FEELING:,6 N CONTCT OVERTRVEL or markings are available in any combination of text / legend or status indicator. 4 3, 3, 3, 4 3, TEXT/LEGEND = 9,5 or,5 or 4mm,6 7,5 STTUS INDICTOR Dimensions are shown: mm -9

130 -30 Dimensions are shown: mm

131 PB Series Single Pole and Multi-Key Switches Features/Benefits Momentary or latching options Reliable contact design, 4, and 6 pole configurations Long travel and extended life cycles Typical pplications ppliances udio and visual equipment Consumer electronics Industrial equipment Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 50 ± 00 gf (.45 ± 0.98N) LOCK TRVEL: ± 0.3 mm TOTL TRVEL: 3 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials CSE: PC (UL 94HB) PLSTIC CLIP: POM (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated PB-D0-L PDT LOCK / LTCHING 5 4 P R OVERLL TRVEL TRVELS P DETIL : P T ø SCHEMTIC PIERCING PLN Dimensions are shown: mm -3

132 .5 PB Series Single Pole and Multi-Key Switches PB-4D0-L 4PDT LOCK / LTCHING COMX P 3 OVERLL TRVEL SELF LOCK TRVEL.8 R0.5 x 0..8x.8 4P - T P DETIL : Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 80 ± 00 gf LOCK TRVEL: ± 0.3 mm TOTL TRVEL: 3 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials CSE: PC (UL 94HB) PLSTIC CLIP: POM (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated -Ø0.9 SCHEMTIC PIERCING PLN PB-6D0-L 6PDT LOCK / LTCHING 30 4 P COMX 4 SELF LOCK TRVEL P - T OVERLL TRVEL 3 P DETIL : Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 300 ± 00 gf (.94 ± 0.98N) LOCK TRVEL: ± 0.3 mm TOTL TRVEL: 3 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials CSE: PC (UL 94HB) PLSTIC CLIP: POM (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated Ø0.9 SCHEMTIC PIERCING PLN -3 Dimensions are shown: mm

133 .5 PB Series Single Pole and Multi-Key Switches PB-D0-F PDT NON-LOCK / MOMENTRY P 4 3 OVERLL TRVEL.8 R P DETIL : Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 50 ± 00 gf (.45 ± 0.98N) TOTL TRVEL: 3 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C 5 Materials 3.5 CSE: PC (UL 94HB) PLSTIC CLIP: POM (UL 94HB) SPRING: SUS P T KNOB: POM TERMINL: Silver plated ø SCHEMTIC PIERCING PLN PB-4D0-F 4PDT NON-LOCK / MOMENTRY.5 COMX 4 P R0.5 x.8x.8 0. P DETIL : 3 OVERLL TRVEL P - T Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 80 ± 00 gf (.477 ± 0.98N) TOTL TRVEL: 3 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials CSE: PC (UL 94HB) PLSTIC CLIP: POM (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated -Ø0.9 SCHEMTIC PIERCING PLN Dimensions are shown: mm -33

134 PB Series Single Pole and Multi-Key Switches PB-6D0-F 6PDT NON-LOCK / MOMENTRY COMX OVERLL TRVEL P P DETIL : R0.5 x Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 300 ± 00 gf (.94 ± 0.98N) TOTL TRVEL: 3 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials CSE: PC (UL 94HB) PLSTIC CLIP: POM (UL 94HB) SPRING: SUS KNOB: POM 6P - T TERMINL: Silver plated Ø0.9 SCHEMTIC PIERCING PLN PB-G0-L PDT LOCK / LTCHING Specifications P R P - T 4 4.3X0.7 LL CONTCT 5 VDC.5.5 INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. 9 TRVELS OVERLL TRVEL 0..5 P DETIL : DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 350 ± 50 gf (3.43 ±.47N) LOCK TRVEL: 3.5 ± 0.3mm TOTL TRVEL: 5 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials CSE: PC (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated SCHEMTIC PIERCING PLN Dimensions are shown: mm -34

135 PB Series Single Pole and Multi-Key Switches PB-4G0-L 4PDT LOCK / LTCHING P - T P 0..5 P DETIL : 3.5 LOCK TRVEL 5 OVERLL TRVEL P LOCK TRVEL 5 OVERLL TRVEL R x.5 3.3x P DETIL : P - T X0.7 LL R x x3.3.3X0.7 LL Specifications CONTCT 5 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 400 ± 50 gf (3.9 ±.47N) LOCK TRVEL: 3.5 ± 0.3mm TOTL TRVEL: 5 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials HOUSING: PC (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated SCHEMTIC PIERCING PLN PB-6G0-L DPDT LOCK / LTCHING Specifications CONTCT 5 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 450 ± 50 gf LOCK TRVEL: 3.5 ± 0.3mm TOTL TRVEL: 5 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials HOUSING: PC (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated SCHEMTIC PIERCING PLN -35 Dimensions are shown: mm

136 PB Series Single Pole and Multi-Key Switches PB-G0-F DPDT NON-LOCK / MOMENTRY P 5 OVERLL TRVEL P - T P DETIL : P 0. 5 OVERLL TRVEL 36.8 R x.5 3.3x P DETIL : P - T X0.7 LL 6 6 R X0.7 LL Specifications CONTCT 5 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 350 ± 50 gf (3.43 ±.47N) TOTL TRVEL: 5 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials CSE: PC (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated SCHEMTIC PIERCING PLN PB-4G0-F 4PDT NON-LOCK / MOMENTRY Specifications CONTCT 5 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 400 ± 50 gf (3.9 ±.47N) TOTL TRVEL: 5 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials HOUSING: PC (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated SCHEMTIC PIERCING PLN -36 Dimensions are shown: mm

137 PB Series Single Pole and Multi-Key Switches 9 PB-6G0-F 6PDT NON-LOCK / MOMENTRY P 0. 5 OVERLL TRVEL P DETIL : 0.8 R0.5.5x.5 3.3x Specifications CONTCT 5 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 450 ± 50 gf (4.4 ±.47N) TOTL TRVEL: 5 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C X0.7 LL P - T Materials HOUSING: PC (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated SCHEMTIC PIERCING PLN PB Multi-Key Series P B K Key K K K K 3K 3K 4K 4K 5K 5K Travel G 3.5 mm D mm Key Pitch Mounting Hole M3 x 0.5 B 3. C No mounting hole 7 30 Poles poles 4 4 poles 6 6 poles Operating Type E Release F Non-lock L Self-lock T Interlock XF ll non-lock XT ll self-lock XL ll interlock Terminal Shape P X N Contact Function S Shorting NS Non-shorting Dimensions are shown: mm -37

138 PB Series Single Pole and Multi-Key Switches PB Multi-Key Series TYP.5.3X0.7 LL 6 8 -ø 3. HOLES Ø3. TYP. P OVERLL TRVEL 3.5 INTERLOCK TRVEL TYP.5 0. P DETIL 3 : X.5 3.3X Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles without load OPERTING FORCE: 50 ± 00 gf (.45 ± 0.98N) TOTL TRVEL: 3 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C Materials CSE: PC (UL 94HB) PLSTIC CLIP: POM (UL 94HB) SPRING: SUS KNOB: POM TERMINL: Silver plated 4P - T SCHEMTIC PIERCING PLN -38 Dimensions are shown: mm

139 PS-G Series Switches Features/Benefits Latching pushbutton Non-shorting with lock 5 mm travel SPDT Typical pplications utomotive interior lighting Computer peripherals ppliances PRT NUMBER PCKGING SCHEMTIC PS-G0 00 pieces Dimensions FOOTPRINT: 4 X 6.8 mm HEIGHT: 8 mm Specifications CONTCT 4 VDC INITIL CONTCT RESISTNCE: 00 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles with load OPERTING FORCE: 400 ± 00 gf OPERTING POSITION: 3.6 ± 0. mm TOTL TRVEL: 5 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C 0.55 ~ ~.0 C Materials KNOB: POM (UL 94HB) HOUSING: PBT (UL 94V-0) COVER: PBT (UL 94V-0) ROTOR: PBT (UL 94V-0) SLIDER: POM (UL 94HB) TERMINL: Phospher bronze, silver plated SPRING: Stainless steel CONTCT: Phospher bronze, silver plated Dimensions are shown: mm -39

140 PS-G Series Switches PRT NUMBER PCKGING SCHEMTIC PS-G03 00 pieces Dimensions FOOTPRINT: 4 X 6.8 mm HEIGHT: 8.3 mm Specifications CONTCT 4.5 VDC INITIL CONTCT RESISTNCE: 50 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles with load OPERTING FORCE: 650 ± 300 gf OPERTING POSITION: 4.00 ± 0. mm TOTL TRVEL: 4.5 ± 0.3 mm OPERTING TEMPERTURE: -40 C to 85 C Materials KNOB: POM (UL 94HB) HOUSING: PBT & P (UL 94V-0) COVER: PBT (UL 94V-0) ROTOR: PBT (UL 94V-0) SLIDER: POM (UL 94HB) TERMINL: Brass, silver plated SPRING: Stainless steel CONTCT: Phospher bronze, silver plated TYCO.06 Commercial Pin and Socket Connector PT# Dimensions are shown: mm

141 PS- Series Subminiature Switches Features/Benefits Compact miniature push switch Momentary or latching options Shorting or non-shorting DPDT Typical pplications Industrial utomotive udio and visual equipment PRT NUMBER PCKGING SCHEMTIC Dimensions FOOTPRINT: 7.0 x 7.0 mm HEIGHT:.5 mm PS-03-L NS P PS-03-F NS P,000 pieces,000 pieces Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles with load OPERTING FORCE: 00 ± 00 gf (.96 ± 0.98N) LOCK TRVEL: mm.0.6.0±0.5 FULL TRVEL TOTL TRVEL: mm OPERTING TEMPERTURE: -0 C to 70 C LOCK TRVEL Materials KNOB: POM Black HOUSING: P Black 7.0 COVER: POM Grey (latch) / White (Mom) TERMINL: Brass, silver plated CONTCT CLIP: Phosphor bronze., silver plated SPRING: Stainless steel HOOK LOCK: Stainless steel (latch) 6-Ø0.9 5 PIERCING PLN Dimensions are shown: mm -4

142 5.8 PS- Series Subminiature Switches PRT NUMBER PCKGING SCHEMTIC PS-06-L NS P PS-06-F NS P,000 pieces,000 pieces 4 P - T Dimensions FOOTPRINT: 8.0 x 8.0 mm HEIGHT: 3.5 mm Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 70 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles with load OPERTING FORCE: 00 ± 00 gf (.96 ± 0.98N) LOCK TRVEL:.5 mm TOTL TRVEL:.5 mm OPERTING TEMPERTURE: -0 C to 70 C Materials KNOB: POM Black HOUSING: P Black COVER: POM Grey (latch) / White (Mom) TERMINL: Brass, silver plated CONTCT CLIP: Phosphor bronze., silver plated SPRING: Stainless steel HOOK LOCK: Stainless steel (latch) PRT NUMBER PCKGING SCHEMTIC Dimensions FOOTPRINT: 5.8 x 5.8 mm HEIGHT: 7.5 mm LOCK TRVEL FULL TRVEL.45±0..3±0. PS-4-L NS P PS-4-F NS P 3.,000 pieces,000 pieces Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 80 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles with load OPERTING FORCE: 50 ± 50 gf (.47 ± 0.49N) LOCK TRVEL:.45 mm TOTL TRVEL:.3 mm OPERTING TEMPERTURE: -0 C to 70 C PIERCING PLN 6-Ø Materials KNOB: POM Natural (latch) / P black HOUSING: P Black COVER: P Black TERMINL: Brass, silver plated CONTCT CLIP: Phosphor bronze, silver clad SPRING: Stainless steel HOOK LOCK: Stainless steel (latch) Dimensions are shown: mm -4

143 PS- Series Subminiature Switches PRT NUMBER PCKGING SCHEMTIC PS-605-L NS PS-605-F NS,000 pieces,000 pieces Dimensions FOOTPRINT: 5.8 x 5.8 mm HEIGHT: 0 mm Specifications CONTCT RTING: 30 VDC VDC INITIL CONTCT RESISTNCE: 80 m ohms max. INSULTION RESISTNCE: 00 M ohms min. b b ±0.5 LOCK TRVEL.0±0. FULL TRVEL b DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles with load OPERTING FORCE: 50 ± 50 gf (.47 ± 0.49N) LOCK TRVEL:.3 mm TOTL TRVEL:. mm OPERTING TEMPERTURE: -0 C to 70 C Materials b b KNOB: POM Natural HOUSING: P Black b COVER: PC Grey TERMINL: Bras, silver plated CONTCT CLIP: Phosphor bronze, silver clad SPRING: Stainless steel 4.5 HOOK LOCK: Stainless steel (latch) 6- ø PIERCING PLN Dimensions are shown: mm -43

144 PS Series Miniature Switches PS-I05 DPDT NON-SHORTING ±0. 8±0. 6 COMX Features/Benefits Miniature size Momentary or latching options Broad range of products 4.5±0.3 TRVEL R0.5 Typical pplications Industrial utomotive udio and visual equipment Telecommunications Specifications CONTCT RTING: 30 VDC INITIL CONTCT RESISTNCE: 30 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 500 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 0,000 cycles with load OPERTING FORCE: 400 ± 50 gf (3.9 ±.47N) TOTL TRVEL: 4.5 ± 0.3 mm OPERTING TEMPERTURE: -0 C to 70 C P VIEW 4 P P - T Materials FRME: SECC KNOB: POM (UL 94HB) CONTCT PLTE: Silver clad SPRING: SUS TERMINL: Silver plated SCHEMTIC PS-C0-F NS SPST NON-SHORTING P 0.60± C0. DETIL:P 8: 0.5±0.05 CN ±0.05 CN- MP, JST COMX ±0.5 6.± C0.5.55± ± ?.0?.?.6mm PIERCING PLN R R Specifications CONTCT RTING: 00 3 VDC min. / 5 VDC max INITIL CONTCT RESISTNCE: 00 m ohms max. INSULTION RESISTNCE: 00 M ohms min. DIELECTRIC STRENGTH: 50 V C (50-60 Hz) between open terminals and between the frame and terminal. OPERTING LIFE: 00,000 cycles with load OPERTING FORCE: 50 ± 5 gf (0.49 ± 0.47N) PRE-TRVEL: 6.0 ± 0.35 mm OPERTING TEMPERTURE: -40 C to 85 C Materials KNOB: POM (UL 94HB) COVER: P (UL 94V-0) HOUSING: P (UL 94V-0) SPRING: SUS TERMINL: Silver plated CN- CN- SCHEMTIC Dimensions are shown: mm -44