C&K GT Series Sealed Ultraminiature Toggle Switches
|
|
|
- Mark Warner
- 5 years ago
- Views:
Transcription
1 C&K T Series Sealed Ultraminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature materials (UL 9V-0) RoHS compliant and compatible Typical Applications Hand-held telecommunications Small instrumentation Specifications CONTACT RATIN: 0. VA 20 V AC or DC max. MECHANICAL & ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 50 m Ω typ. 2- V DC, 00 ma. INSULATION RESISTANCE: 0 9 Ω min. DIELECTRIC STRENTH: 500 Vrms sea level. OPERATIN TEMPERATURE: 0ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-8E method 9 ( hour steam aging). PACKAIN: Surface mount switches shipped in anti-static tape and reel packaging per EIA 8-, see page -8 for drawings and reel information. Tape and cover strip are conductive for use near statically sensitive components, consult Customer Service Center. Materials HOUSIN AND BASE: lass filled nylon / or /, flame retardant, heat stabilized (UL 9V-0). ACTUATOR: lass filled nylon /, flame retardant, heat stabilized (UL 9V-0), with standard internal o-ring seal. SWITCH SUPPORT: Brass, tin plated. MOVABLE CONTACTS: Copper alloy, with gold plate over nickel plate. STATIONARY CONTACTS: Copper alloy, with gold plate over nickel plate. TERMINALS: old. TERMINAL : Epoxy. All terminals insert molded. NOTE: For the latest information regarding RoHS compliance, please go to: /rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Complete part numbers for T Series Sealed Ultraminiature Switches are shown on pages thru 8. TMCBE TMCBE TMCBE.0 (,0).70 DIA..50 (,8).0 (,0) C&K MARKIN ON.05 TYP. OPPOSITE SIDE (0,8) (0,5).77 (,50) 2 (7,0) T2MCBE.228 (5,79).0 TYP. (,0) ACTUATOR SHOWN IN POS. TERMINAL NOS. FOR T2-omit hole 2. T2 MODEL TERMINALS,, & ONLY
2 C&K T Series Sealed Ultraminiature Switches.0 (,0).70 DIA..50 (,8).0 (,0).228 (5,79) C&K MARKIN ON OPPOSITE SIDE (0,5).0 TYP. (,0).05 TYP. (0,8).77 (,50) 5 2 (7,0) T2MCBE T2MCBE T2MCBE ACTUATOR SHOWN IN POS. TERMINAL NOS. FOR T22MCBE T22 MODEL TERMINALS,, & ONLY T22-omit holes 2 & 5. TMABE TMABE TMABE T2MABE T2 Models T2-omit hole 2. T2MABE T2MABE T22MABE, - T2MABE T22-omit holes 2 & 5. T22 Models
3 C&K T Series Sealed Ultraminiature Switches TMAVBE TMAVBE TMAVBE Vertical T2MAVBE T2 omit hole 2. T2 Models T2MAVBE T2MAVBE T2MAVBE Vertical T22MAVBE, - T22 omit holes 2 & 5. T22 Models:,, & terminals only. TMVBE TMVBE TMVBE T2MVBE T2 omit hole 2. T2 Models 5
4 C&K T Series Sealed Ultraminiature Switches T2MVBE T2MVBE T2MVBE T22 Models:,, & terminals only. T22MVBE, -.50 (,8).27 (,9).25 (5,) (7,0) 2 TMSABE.200 (5,08) (0,5).09 (2,77).05 (,5).0 (8,) ACTUATOR SHOWN IN POS..05 X (0,8) X (0,5).050 TYP. (,27) TYP. TERM NOS. FOR T2 MODEL TERMS. & ONLY TMSABETR TMSABETR T2MSABETR Standard with tape & reel packaging, see page -7. T2-omit pad 2. TMSCBETR TMSCBETR TMSCBE T2MSCBETR Standard with tape & reel packaging, see page -7. T2-omit pad 2. T2 Models
5 C&K T Series Sealed Ultraminiature Switches T2MSCBE T2MSCBETR T2MSCBETR T22MSCBETR, - T22 Models Standard with tape & reel packaging, see page 7. T22-omit pads 2 & 5. TAPE & REEL For part numbers TMSABE, T2MSABE, TMSABE REEL INFORMATION OUTSIDE DIAMETER.00 (0,0) PILOT HOLE.52 (,0) QUANTITY PER REEL 00 For part numbers TMSCBE, T2MSCBE, TMSCBE, T2MSCBE, T22MSCBE, T2MSCBE, REEL INFORMATION OUTSIDE DIAMETER.00 (0,0) PILOT HOLE.52 (,0) QUANTITY PER REEL 200 7
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
ET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
C&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
C&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
DM Series Miniature Illuminated Power Rocker Switches
Miniature Illuminated Power Switches Features/Benefits AMPS to AMPS Illuminated LED Positive detent RoHS compliant Typical Applications Instrumentation Industrial Office machines UL 658-1 Specifications
C&K EP Series Sealed Tiny Pushbutton Switches
Models Available Features/enefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available Typical Applications
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
DM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
C&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
T101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.
T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you
C&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
T Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
Rotary Switches Product Selection Guide
Switches Product Selection Guide Series A RTA M R F H RW RM ENC Switch Type Multi-pole/ Multi-position Multi-pole/ Multi-position Half-inch Rota-slide Rota-slide Power Rota-slide Subminiature SMT Subminiature
Y Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
BY Series 4 Tumbler Value Added Security Switchlocks
4 Tumbler Value Added Security s Features/Benefits Anti-static switch Removable lock core atch pawl option Snap-together assembly Typical Applications Computers Point-of-sale terminals Postal equipment
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
RTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
RTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
Series KMX KMR 2-4 KMS PTS525 KSR KSS KST. 4,6 x 2,8 6,4 x 5,25 7,15x3,8 7,3x3,8 7 x 3, , , ,000
Product Selection Guide Surface Mount Series KMX KMR 2-4 KMS PTS525 KSR KSS KST Size on PC L x W (mm) 4,1 x 4,1 4,6 x 2,8 4,6 x 2,8 6,4 x 5,25 7,15x3,8 7,3x3,8 7 x 3,5 J G 6,8x6,2 10x6,2 Total Height (mm)
C&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
KSC Series Sealed Tact Switch for SMT
KSC Series Features/Benefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
C&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
H Series 4 & 6 Tumbler Power Switchlocks
4 & 6 Tumbler Power s Features/Benefits Positive detent Multi-pole and multi-position Snap-together assembly Power switching Typical Applications Machine controls Elevators Models Available Specifications
Series 47B: Sealed Miniature Rocker and Paddle Switches
Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP
KSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
TF2 Series Miniature Snap-acting Switches
Miniature Snapacting Switches Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available poxy terminal seal compatible with bottom-wash cleaning Typical Applications Test & measurement equipment
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
KSA & KSL Series Sealed Tact Switch
Features/enefits Designed for automatic or manual insertion Cambered terminals to ensure self retention Top or side actuated Large choice of caps RoHS compliant and compatible Specification CONTACT ARRANGEMENT:
2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
C&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
Snap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
Pushbutton Product Selection Guide
Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws
Part Number Example (example) CDR31 BP 101 B K S M. MIL Style Voltage-temperature Limits
Part Number Example CDR31 thru CDR35 MILITARY DESIGNATION PER MIL-PRF-55681 W D L t Part Number Example (example) CDR31 BP 101 B K S M MIL Style Voltage-temperature Limits T Capacitance Rated Voltage Termination
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
DATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
POLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
Positive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
Model C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
*HDMI-STYLE WEATHERTIGHT CONNECTORS *HDMI-STYLE WEATHERTIGHT CONNECTORS NPB C714
601 E WILDWOOD VILLA PARK, IL 60181 P: 630.834.7504 F: 630.834.8540 WWW.CONXALL.COM FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when panel connector is rear mounted and mated to the cable)
KSA & KSL Series Sealed Tact Switch
Specification CONTACT ARRANGEMENT: SPST, N.O. DOULE OVERMOLDING ON TERMINAL SEALING: IP6 TERMINALS: PC pins, ground pin optional Mechanical Actuation force Operating life Travel to Type N (operations)
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
D Series Miniature Snap-in Power Rocker Switches
Miniature Snap-in Power Switches Features/Benefits Momentary and maintained models PC and quick connect terminals Recessed bracket available prevents accidental actuation RoS compliant Typical Applications
Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
Pushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
Single 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
POLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
SolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
SIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
Features. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
Product Range. Keylock Switches. Keylock Switches. Keylock Switches
Product Range Medium Security : 2SWK, SKF Series High Security : SWK Series Main features: SPST type - 5 disc tumbler versions SPST type - 8 disc tumbler versions DPDT type - 4 disc tumbler versions All