AV SERIES PUSHBUTTON SWITCHES Distinctive features
|
|
- Tyrone Franklin
- 5 years ago
- Views:
Transcription
1 PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing Fire resistant Long life Sealed versions Degrees of protection (switches mounted on vertical panels) : - standard version : IP54 - sealed version : IP65 Table explaining degrees of protection (IP and I codes) The degree of protection is indicated by letters and numbers. Example : I P 6 5 protection against water protection against dust IP degree of protection provided by the enclosures of electric appliances according to IEC 59 and DIN I. degree of protection provided by the enclosures of electric appliances against external mechanical impacts according to EN 500 (NFC 0-05). st number : protection against ingress of solid objects IP tests IP nd number : protection against liquids tests I code : mechanical protection 0 Non-protected 0 Non-protected Protected against solid objects of 50 mm (.968) and greater Protected against vertically falling water drops 3 Protected against solid objects of,5 mm (.49) and greater Protected against solid objects of,5 mm (.098) and greater 3 Protected against vertically falling water drops when enclosure tilted up to 5 Protected against water sprayed vertically at an angle up to 60 The degree of mechanical protection is now defined by the letters I according to EN 500 of June 995 (NFC 0-05) 4 Protected against solid objects of mm (.039) and greater 4 Protected against splashing water It is only applicable to the Anti-vandal switch family. See following pages. 5 Dust-protected (no harmful ingress) 5 Protected against water jets from any direction 6 Dust-tight (no ingress) Packaging unit : 0 or 40 pieces depending on models, except AV (0 pieces), AV06 (60 pieces), AVP, AVL and AV4L with anodised plunger (6 pieces). Mounting accessories : Standard and special hardware are presented in section N. -
2 PUSHBUTTON SWITCHES Distinctive features The AV series is a large range of security pushbutton switches including 4 product families : ANTI-VANDAL PUSHBUTTON SWITCHES (page -4) Increased impact resistance provided by a nut or mechanical stop Stainless steel actuator and bushing SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR (page -7) Ergonomic actuator dia. 0 mm (.787) or 30 mm (.8) Tactile feedback Up to 5A 50VAC OTHER SECURITY PUSHBUTTON SWITCHES (page -0) A large variety of actuator shapes, electrical functions, connections, finish and marking options SNAP-ACTION SECURITY PUSHBUTTON SWITCHES (page -5) Tactile feedback Illuminated or non-illuminated -3
3 ANTI-VANDAL PUSHBUTTON SWITCHES Distinctive features and specifications Increased impact resistance provided by a nut or mechanical stop Stainless steel actuator and bushing SPECIFICATIONS Max. current/voltage rating with resistive load : A 48 VDC Initial contact resistance : 0 mω max. at A V Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame.000 Vrms 50 Hz min. between terminals Electrical life : cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to mm (.433) max. Operating temperature : -0 C to +55 C Mechanical life : cycles MATERIALS : PBT s : brass, silver plated (C) Bushing : stainless steel Actuator : stainless steel CUT-OUTS Panel cut-out : Ø 9, mm (.755) or Ø, mm (.874) Min. pitch for matrix mounting : 30 mm (.8) x 30 mm (.8) ROBUSTNESS Model Ø 9 mm (.748) Model Ø mm (.866) Degree of protection according to EN 500, June 95 (NFC 0-05).7 g 9.5 cm Hammer radius 5 mm I08 Striking energy: 5 joules (5Nm) 5 g 40 cm Hammer radius 50 mm I0 Striking energy: 0 joules (0Nm) Impacts on actuator according to CECC Hammer radius 0 mm 0.3 g 34 cm 0 strokes Striking energy: joule (Nm).5 g 34 cm 0 strokes Striking energy: 5 joules (5Nm) -4
4 ANTI-VANDAL PUSHBUTTON SWITCHES Bushing Ø 9 (.748) Series Function Terminal Sealing AV 00 3 C 40 NO (function 3) D 9 N T Flat actuator - AV09..40N Hex nut (.866) across flats ø9.00x.00 SI (.748DIAx.00 IS) 5.00 (.96) 7.30 (.87).80 (.0) AV09003C940N Solder lug / quick-connect term. AV09003C40N ø.00 ø5.00 ø.50 (.098DIA) ø.00.80x0.5 (.0x.09).0 (.047) (.374) (.55) EPOXY OTHER CONFIGURATIONS Flush model 3.60 (.4) Ø Ø.00 Ø.0 Mini (.874DIA Min.).0 (.047).30 Mini (.05 Min.) Ø9.0 (.755DIA) AV9003C940N Solder lug / quick-connect terminals AV9003C40N AV9D003C940N Solder lug / quick-connect terminals AV9D003C40N SEALING To order a sealed product, replace N with T at the end of above part numbers. T ➀ internal gasket ➁ external gasket Front panel sealing (IP65) Robustness : see Specifications page. -5
5 ANTI-VANDAL PUSHBUTTON SWITCHES Bushing Ø (.866) Series Function Terminal Sealing AV 00 3 C 40 NO (function 3) 03 0 M3 M 9 N T Flat actuator - AV03..40N Hex nut 5 (.984) across flats.00 ø.00x.00 SI (.866DIAx.00 IS) 7.30 (.87).80 (.0) AV03003C940N.0 (.047) Solder lug / quick-connect term. AV03003C40N ø5.00 ø5.00 (.59DIA) ø.50 (.098DIA).80x0.5 (.0x.09).70 (.500) 6.30 (.48) 5.00 (.96) EPOXY OTHER CONFIGURATIONS Flatted bushing 3.60 (.4) Ø Ø5.00 AV0003C940N Solder lug / quick-connect term. AV0003C40N Flat actuator AVM3003C940N AVM003C940N Ø.0 (.874DIA) 0.00 (.393 ) SEALING To order a sealed product, replace N with T at the end of above part numbers. T ➀ internal gasket ➁ external gasket Front panel sealing (IP65) Robustness : see Specifications page. -6
6 SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR Bushing Ø (.866) Combined NC/NO Series Bushing diameter AV Actuator matl L 40 P B C / terminals 4 See next page. SPECIFICATIONS Max. current/voltage rating with resistive load : 5A 50VAC Initial contact resistance : 00 mω max. Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame Electrical life : cycles at A 50VAC cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to 6 mm (.36) max. Operating temperature : -0 C to +55 C Mechanical life : cycles Front panel sealing : IP65 MATERIALS : polyester, glass filled s : silver/nickel alloy Bushing : stainless steel (std) Actuator : stainless steel (std) CUT-OUT Panel cut-out : Ø, (.874) or Ø 4, (.95) Min. pitch for matrix mounting : 30 mm x 30 mm (.8x.8) All model numbers below are for switches with standard bushing/actuator. Flat actuator - solder lug terminals - AVLP O-ring 9.00 (.4) Hex nut 5 (.984) across flats.50 (.49) AVLP40 Ø6.00 (.03DIA) Ø0.00 (.787DIA) 4.00 (.57) 0.50 (.09) Ø.00x.00 SI (.866DIAx.00 IS).40 (.055).40 (.094) OTHER CONFIGURATIONS Recessed actuator AVLB40 AVLC40-7
7 SECURITY PUSHBUTTON SWITCHES WITH LARGE ACTUATOR Bushing Ø 4 (.944) - low profile Flat actuator - solder lug terminals - AV4LP O-ring (.3) Hex nut 7 (.06) across flats 4.0 (.559) AV4LP40 Ø30.00 (.8DIA) Ø0.00 (.787DIA) Ø4.00x.00 SI (.944DIAx.00 IS).40 (.055).40 (.094).30 (.05) 4.00 (.57) 0.50 (.09) OTHER CONFIGURATIONS Recessed actuator AV4LB40 AV4LC40 BUSHING/ACTUATOR MATERIAL For non-standard, replace 40 with one of the following codes. Models with non-anodized actuator CODE BUSHING ACTUATOR 40 (standard) Stainless steel Stainless steel 0 Chrome plated brass Chrome plated brass Models with anodized actuator CODE BUSHING ACTUATOR COLOUR Black chrome plated brass Chrome plated brass 4 Stainless steel Replace with colour code opposite. Colours : black 3 : pale green 5 : gold yellow 6 : red CONTACT / TERMINALS (standard) NC/NO, solder lug terminals ø.40 (.055 DIA) 4 NC/NO, quick-connect terminals 4.80 (.0) -8
8 MUSHROOM HEAD SECURITY PUSHBUTTON SWITCHES Bushing Ø (.866) Series Bushing diameter Actuator colour / terminals AV PNA Combined NC/NO SPECIFICATIONS Max. current/voltage rating with resistive load : 5A 50VAC Initial contact resistance : 00 mω max. Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame Electrical life : cycles at A 50VAC cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to 6 mm (.36) max. Operating temperature : -0 C to +55 C Mechanical life : cycles Front panel sealing : IP65 MATERIALS : polyester, glass filled s : silver/nickel alloy Bushing : brass, nickel plated Actuator : aluminium, anodized CUT-OUT Panel cut-out : Ø, (.874) Min. pitch for matrix mounting : 30 mm x 30 mm (.8x.8) Solder lug terminals - red actuator - AVPNA 5.00 (.984) Hex nut 5 (.984) across flats Joint (O-ring) 8.50 (.334) AVPNA6 ø30.00 (.8DIA) 0.80 (.45) 4.00 (.57) 0.50 (.09) ø.00x.00 SI (.866DIAx.00 IS).40 (.055).40 (.094) ACTUATOR COLOUR : black - 3 : green - 4 : grey - 5 : yellow - 6 : red CONTACT / TERMINALS (standard) NC/NO, solder lug terminals ø.40 (.055 DIA) 4 NC/NO, quick-connect terminals 4.80 (.0) -9
9 SECURITY PUSHBUTTON SWITCHES Bushing Ø 6 (.69) Series Function matl. Term. Sealing AV 3 0 C 9 NO (function 3) See options page. SPECIFICATIONS Max. current/voltage rating with resistive load : 00mA 48 VDC - 00mA 48VDC Initial contact resistance : 50 mω max. Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame Electrical life : cycles at 00mA 48VDC cycles at 00mA 48VDC Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to 6 mm (.36) max. Operating temperature : -0 C to +55 C Mechanical life : cycles MATERIALS : PBT s : brass, silver plated (C) Bushing and actuator : - nickel plated brass (std), code 00 - stainless steel, option 40 CUT-OUT Panel cut-out : Ø 6, (.637) Min. pitch for matrix mounting : 4 mm x 4 mm (.944 x.944) All model numbers below are for switches with standard bushing/actuator, without marking. Flat actuator - screw terminals - AV06 Hex nut 9 (.748) across flats ø.50 (.098DIA) AV0630C900 ø8.00 (.708DIA) ø.00 (.47DIA) ø6.00x.00 SI (.69DIAX.00 IS) w. chamfer.50 (.059).50 (.059) 9.50 (.374).0 (.440) OTHER CONFIGURATIONS.50 (.059).00 AV630C900 AV0830C900-0
10 SECURITY PUSHBUTTON SWITCHES Bushing Ø 9 (.748) Series Function matl. Term. Marking Sealing AV 00 3 C 00 NO (function 3) P 9B 9 See options page. SPECIFICATIONS Max. current/voltage rating with resistive load : A 48 VDC Initial contact resistance : 0 mω max. at A V Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame.000 Vrms 50 Hz min. between terminals Electrical life : cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to mm (.433) max. Operating temperature : -0 C to +55 C Mechanical life : cycles MATERIALS : PBT s : brass, silver plated (C) Bushing : brass, nickel plated (std) Actuator : brass, nickel plated (std) CUT-OUT Panel cut-out : Ø 9, mm (.755) Min. pitch for matrix mounting : 30 mm (.8) x 30 mm (.8) All model numbers below are for switches with standard bushing/actuator, without marking. Flat actuator - AV Hex nut (.866) across flats.00 ø9.00x.00 SI (.748DIAx.00 IS) 7.30 (.87).80 (.0) AV09003C900 Solder lug / quick-connect term. AV09003C00 ø.00 ø (.53) 5.50 (.6) ø.50 (.098DIA) 5.00 (.96).80x0.5 (.0x.09).0 (.047) EPOXY OTHER CONFIGURATIONS 3.60 (.4) Ø With knurled nut for matrix mounting 5 (.984) x 5 (.984) Ø (.77) Ø (.77) 5.00 (.984) (.984) (.984) AV9003C900 Solder lug / quick-connect terminals AV9003C00 Flat actuator, screw term. AV9P003C900 Flat actuator, solder lug term. AV9P003C00, screw term. AV9B003C900 Curved act., solder lug term. AV9B003C00 Wrench available under P/N U99. -
11 SECURITY PUSHBUTTON SWITCHES Bushing Ø (.866) Series Function matl. Term. Marking Sealing AV 00 3 C 00 NO (function 3) 03 0 M3 M 9 See options page. SPECIFICATIONS Max. current/voltage rating with resistive load : A 48 VDC Initial contact resistance : 0 mω max. at A V Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength :.000 Vrms 50 Hz min. between terminals and frame.000 Vrms 50 Hz min. between terminals Electrical life : cycles at full load Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to mm (.433) max. Operating temperature : -0 C to +55 C Mechanical life : cycles MATERIALS : PBT s : brass, silver plated (C) Bushing : brass, nickel plated (std) Actuator : brass, nickel plated (std) CUT-OUTS Panel cut-out : Ø, mm (.874) Min. pitch for matrix mounting : 30 mm (.8) x 30 mm (.8) All model numbers below are for switches with standard bushing/actuator, without marking. Flat actuator - AV Hex nut 5 (.984) across flats.00 ø.00x.00 SI (.866DIAx.00 IS) 7.30 (.87).80 (.0) AV03003C900.0 (.047) Solder lug / quick-connect term. AV03003C00 ø5.00 ø5.00 (.59DIA) ø.50 (.098DIA).80x0.5 (.0x.09).70 (.500) 6.30 (.48) 5.00 (.96) EPOXY OTHER CONFIGURATIONS Flatted bushing 3.60 (.4) Ø Ø5.00 AV0003C900 Solder lug / quick-connect terminals AV0003C00 Flat actuator AVM3003C900 AVM003C900 Ø.0 (.874DIA) 0.00 (.393 ) -
12 SECURITY PUSHBUTTON SWITCHES Bushing Ø 9 (.748) or Ø (.866) - other electrical functions Bushing Ø 9 (748) - combined NC/NO - AV Single pole, solder lug terminals Gold plated silver contacts Current/voltage rating with resistive load : - max. : A 30V - min : 0µA 5V Note : a current above 00mA damages the gold plating. Dielectric strength :.000 Vrms between terminals.000 Vrms between terminals and frame Electrical life : cycles at full load Mechanical life : cycles Further specifications : see previous page. Flat actuator AV099035D00 AV99035D00 Ø (.4) Ø9.00x.00 SI (.748DIAx.00 IS) 5.00 (.590) Hex nut (.866) across flats 7.50 (.95).0 (.047) 0.80 (.03) 5.0 (.04).00x0.40 (.078x.05) 5.08 (.00) Bushing Ø (.866) - Normally closed (NC) - AV..00 Single pole, screw terminals, without marking Silver plated copper contacts (C) Max. current/voltage rating with resistive load : A 50VAC - 3A 5VAC -,5A 4VDC Dielectric strength :.000 Vrms 50 Hz min. betw. terminals and frame.000 Vrms. 50 Hz min. between terminals Electrical life : cycles at 0,3A 4VAC or DC cycles at full load Further specifications : see previous page. Flat actuator AV030C00 AV00C00 (.59DIA) Ø5.00 (.59DIA) 3.60 (.4) Hex nut 5 (.984) across flats Ø.00x.00 SI (.866DIAx.00 IS) (.55) 5.40 (.606) Øx0.50 (.8DIAx.0.50) 7.00 (.75) 3.0 (.59) Bushing Ø (.866) - alternate action - AV Double pole, solder lug/quick-connect term., curved actuator Silver contacts Max. current/voltage rating with resistive load : 3(,5)A 50VAC - 6A 5VAC - 3A 4VAC or DC Dielectric strength : 0 Vrms min. between terminals and frame Electrical life : cycles at full load cycles at A 4VAC or DC Mechanical life : cycles Further specifications : see previous page. Ø5.00 (.59DIA) Ø.00x.00 SI (.866DIAx.00 IS).60 (.063) Hex nut 5 (.984) across flats 0.50x.80 (.09x.0) 5.80 (.8) 8.40 (.330) AV044746A00 ON - ON 3.60 (.4) 4.00 (.55) (.8) (.83) Bushing/actuator s, marking and sealing : see options on next page. -3
13 SECURITY PUSHBUTTON SWITCHES Options After selecting basic model number, fill in last 3 boxes with desired options. Series AV Function matl. Term. Marking Sealing BUSHING/ACTUATOR MATERIAL For non-standard, replace 00 with one of the following codes. Models with flat or curved metal actuator CODE BUSHING ACTUATOR 00 (standard) Nickel plated brass Nickel plated brass 0 Nickel plated brass Stainless steel Nickel plated brass Chrome plated brass 0 Chrome plated brass Chrome plated brass 30 Chrome plated brass Stainless steel 80 Varnished polished brass Varnished polished brass Models with flat thermoplastic actuator CODE BUSHING ACTUATOR COLOUR 0 (standard) Nickel plated brass Chrome plated brass 8 Varnished polished brass Replace with colour code opposite. Colours : blue : black 3 : green 4 : grey 5 : yellow 6 : red 7/: white 9 : orange MARING For flat or curved actuator. Not available on model AV030C00. - by engraving on brass actuator (stainless steel on request) - by hot stamping on thermoplastic actuator (0.34).50 (0.059) (0.590DIA) CODE TYPE OF MARING TYPE 0 to 9 Numbers 0 to 9 X Symbol * Y Symbol # A to N Letters A to N P to W Letters P to W 0 Letter O Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces Select an option from each of the two tables below. CODE COLOUR OF MARING COLOUR Brass actuator 0 (standard) Same as finish Black Note : a finished product supplied in version 0 cannot be modified to version "". Thermoplastic actuator Black 7 White SEALING Blank No sealing Frontal panel sealing (IP65) For s with bushing Ø 6 ➀ elastomer membrane ➁ external gasket ➀ internal gasket ➁ external gasket Front panel sealing (IP65) For s with bushing Ø 9 or Ø -4
14 SNAP-ACTION SECURITY PUSHBUTTON SWITCHES Bushing Ø 9 (.748) - Illuminated or not NO (function 3) Series Illum. or not Funct. matl. Term. LED colour AV C7 3 D L 0 Marking Seal. See options on next page. SPECIFICATIONS Max. current/voltage rating with resistive load : 50mA 4VDC LED voltage and consumption : Two-colour LED V (3V max.) 0mA Other colours : V (3V max.) 0mA (a resistor must be series-connected by the user) Initial contact resistance : 00 mω max. Insulation resistance :.000 MΩ min. at 500VDC Dielectric strength : 500 Vrms 50 Hz min. between terminals.000 Vrms 50 Hz min. between terminals and bushing Electrical life : cycles at full load Operating force : 7 N +/-N Travel : 0,7 mm (.07) +/- 0, mm (.003) Torque : 5 Nm min.- 4 Nm max. applied to nut Panel thickness : (.039) to mm (.433) max. Operating temperature : -30 C to +70 C Soldering : 70 C max. during 3 sec. MATERIALS : PBT UL94-V0 Terminals : brass, gold plated s : gold plated dome Bushing : brass, nickel plated (std) Actuator : brass, nickel plated (std) LED CUT-OUTS Panel cut-out : Ø 9, mm (.755) Min. pitch for matrix mounting : 30 mm (.8) x 30 mm (.8) All model numbers below are for switches with standard bushing/actuator, without marking. Flat actuator - solder lug terminals - non-illuminated Hex nut (.866) across flats 0.80 (.03).00 Ø9.00x.00 SI (.748DIAx.00 IS).90 (.074) AV09C703D00.80 (.070).0 (.043) Ø.00 Also available with curved actuator : AV9C703D (.00) 3.50 (.53) 3.90 (.53) 4.5 (.63) Flat actuator - solder lug terminals - illuminated Hex nut (.866) across flats 0.60x.80 (.03x.070).0 (.480) Ø9.00x.00 SI (.748DIAx.00 IS) (.074) AV09C7L3D00.80x0.80 (.070x.03).0 (.043) Ø.00 Ø0.00 (.393DIA) 5.08 (.00) 3.50 (.53) 3.90 (.53) 4.5 (.63) -5
15 SNAP-ACTION SECURITY PUSHBUTTON SWITCHES Options After selecting basic model no., fill in last 4 boxes with desired options. Series AV Illum. or not Funct. matl. Term. LED colour Marking Seal. BUSHING/ACTUATOR MATERIAL Non-illuminated models CODE BUSHING ACTUATOR For non-standard, replace 00 with one of the following codes. Illuminated models CODE BUSHING ACTUATOR 00 (std) Nickel plated brass Nickel plated brass 0 Nickel plated brass Stainless steel 30 Chrome plated brass Stainless steel 40 Stainless steel Stainless steel 80 Varnished polished brass Varnished polished brass 00 (std) Nickel plated brass Nickel plated brass 0 Chrome plated brass Chrome plated brass 40 Stainless steel Stainless steel 45 Stainless steel Nickel plated brass 80 Varnished polished brass Varnished polished brass LED COLOUR Blank No LED : Blue Green Yellow - 6 : Red - 7 : White - 9 : Orange - : Red/green For flat or curved actuator. - by engraving on non-illuminated brass actuator (stainless steel on request). - by hot stamping on thermoplastic insert ( illuminated actuators) 8.00 (0.34) MARING.50 (0.059) Ø0.00 (0.393DIA).00 (0.039) CODE TYPE OF MARING TYPE 0 to 9 Numbers 0 to 9 X Symbol * Y Symbol # A to N Letters A to N P to W Letters P to W 0 Letter O Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces Select an option from each of the two tables below. CODE COLOUR OF MARING COLOUR Non-illuminated actuators 0 (standard) Same as finish Black Note : a finished product supplied in version 0 cannot be modified to version "". Illuminated actuators Black (on white) SEALING Blank No sealing -6 Front panel sealing (IP65) ➀ internal gasket ➁ external gasket
AV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
More informationSealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More information1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
More informationMomentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
More informationIR series Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationIL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationIP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationIP series Latching action pushbutton switches for harsh environments
Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact
More informationSelection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
More informationIR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IRMOM-1801 DISTINCTIVE FEATURES Screw version up to A Tactile feedback Sealed to IP6 Illuminated or non-illuminated Flat round actuator for optional marking ENVIRONMENTAL SPECIFICATIONS Front panel
More informationIQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More informationSeries AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationIP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPLATCH-802 DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67
More information2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview
Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special
More informationPushbutton and key switches
Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationSealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range
I range Sealed pushbutton switches Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches
More informationCommon features. Installation options. Aesthetic options
New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series
More informationSecurity Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
More informationAPEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large
More information600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview
600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationAPEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features
More informationFP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching
Fully illuminated pushbutton switches bushing Ø 30 mm momentary or latching Distinctive features and specifications Full actuator or symbol illumination UG1410AR3 Snapin and threaded bushing models Large
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More informationAttractive rugged rocker switch
istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols
More information600H and 600NH series Toggle switches - high amperage
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts
More information600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN
SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings
More informationFP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching
Fully illuminated pushbutton switches bushing Ø 24 mm momentary or latching Distinctive features and specifications Threaded bushing UG1410AR2 Full actuator or symbol illumination Large but lightweight
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationSealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
More informationSeries. Robust and attractive.
Series 82 Robust and attractive. www.eao.com Series 82 Robust and attractive. With Series 82, EAO offers the optimal pushbutton for vandal-resistant, stylish HMI controls used in harsh industrial environments,
More information5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
More information3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features
HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts
More informationA1-A01-A02-A03 series
A1-A01-A02-A03 series Industrial controls Distinctive features The A01 and A02 series offer ranges of : - pushbutton switches, illuminated or not - indicators - 2 or 3 position keylock switches - 2 or
More informationPushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS
Distinctive features and specifications A01_AX1607US Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC PANEL CUT OUT ELECTRICAL
More informationAPEM. K range. Power rocker switches and indicators. Unique rocker design
APEM K range Power rocker switches and indicators Wide range Laser etched symbols Illuminated or nonilluminated Optionally sealed to IP8 Unique rocker design K range Power rocker switches and indicators
More informationMiniature Stainless Steel Vandal Resistant
Miniature Vandal Resistant Prominent Button / Flush Profile Prominent and Flush Profile 2A, 36 dc (Front of Panel Only) Specification /3 /1 Operating Temp Range: 0.6Nm 0.6Nm PA Copper, Gold Plated PA Copper,
More informationPushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS
Distinctive features and specifications Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC A01_AX1607USR1 ELECTRICAL SPECIFICATIONS
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationVarious rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS
00 series istinctive features and specifications Three rocker shapes : plain, Vshaped or concave Various rocker colours Frame with protection guard on 00LP models Illuminated or nonilluminated UL, CSA,
More informationPower rocker switches
Distinctive features and specifications Protected rocker Illuminated or nonilluminated VDE (EN 08) approved Sealed to IP ELETRIL SPEIFITIONS urrrent/voltage rating : functions (ONOFF) and (ONON) : VD,
More informationCapacitive Switches
Capacitive Switches www.capacitive-switch.com About Capacitive Switches The new CP series technology senses the touch of a finger and creates an electrical charge to activate the switches An auto-calibration
More informationCapacitive Switches
Capacitive Switches www.capacitive-switch.com langir About Capacitive Switches The new CP series technology senses the touch of a finger and creates an electrical charge to activate the switches An auto-calibration
More informationGeneral_technical_data Series
Emergency-stop Switching system The double-break switching system can be supplied for the following switching functions: 1 Normally closed, 2 Normally closed, 1 Normally closed + 1 Normally open. The Normally
More informationSwitches- and Indicators
Switches- and Indicators Contents Description... 3 Product Assembly... 4 Mounting instruction... 6 Devices raised mounting... 7 Devices flush mounting... 9 Accessories... 11 Technical Data... 25 Drawings...
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More informationSWITCHES. Other switch types include conventional, push-button and toggle switches.
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
More informationELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
More informationPLK & PLR SERIES Professional keylock or rotary switches
ISO OO AFAQ N /77c PLK & PLR SERIES Professional keylock or rotary switches NEW RANGE Miniature & subminiature to positions to poles PLK - PLR SERIES PROFESSIONAL KEYLOCK OR ROTARY SWITCHES Distinctive
More informationIHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high actuator
More informationIHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications UG1410A Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high
More informationA1-A01-A02-A03 series Industrial controls
A-A0-A0-A0 series Industrial controls Distinctive features The A0 and A0 series offer ranges of : - pushbutton switches, illuminated or not - indicators - or position keylock switches - or position rotary
More informationAnti vandal switch.
Anti vandal switch www.langir.com Anti-vandal series comparison Cutout Diameter / Depth Functions available type Actuator options Dot illumination Ano diz e d Stainless s Gold plated brass Nickel plated
More information7000 SERIES ROCKER AND PADDLE SWITCHES Overview
Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More informationFully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching
istinctive features and specifications Full actuator or symbol illumination UG1410R1 Suited for integrated designs Large but lightweight Sealed to IP69K Pad printed or laser etched symbols Pad printing
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
More informationIndustrial controls. Section G
Industrial controls Section A1 A01 A02 A03 Distinctive features and specifications 3 Engraved aluminium flush mounting pushbuttons & indicators - Panel cut-out Ø 22 (.866) 5 Pushbutton, rotary lever, keylock
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationSERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive)
SWITCH SELECTION GUIDE Trim Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive) MT T1 Quiet Operation, Momentary 10mA @ 5VDC IP64, IP68S 11/16 dia. Threaded SPST (x2)
More informationSeries WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous
RATING: AC125V 7A, AC250V 4A. CIRCUIT: DPDT. CONTACT RESISTANCE: 20m-ohms max. @ 5VDC 1A. DIELECTRIC STRENGTH: AC 1,500V for 1 min. LIFE EXPECTANCY: 6-10 cycle / min. ELECTRICAL LIFE: 6,000 cycle. OPERATING
More informationSwitches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationSMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features
Distinctive features ENTIRELY DESIGNED FOR SURFCE MOUNT Surface mount devices (SMD) are subjected to more stringent constraints of temperature, solderability and space savings than through-hole components.
More informationMechanical Key Switch
Mechanical Key Switch B3F A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force. Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting
More informationQ SERIES Ø19mm (.748") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification Q19_VOY1603R1US Features 19mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
More informationQ19 series. Ø19 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q19-17-07 LED INDICATORS DISTINCTIVE FEATURES 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs Prominent and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins
More informationSPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
More informationAPEM COMPONENTS LIMITED
APEM COMPONENTS LIMITED Designed and manufactured in the UK Illuminated pushbuttons and indicators, Keylock, Lever and Emergency Stop Switches APEM designs and manufactures three product lines: miniature
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationWe Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
More informationSnap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
More informationSwitches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationPower rocker switches with protection guard
Distinctive features and specifications Protected against accidental actuation SWKH709 Wide choice of colors Laser etched or pad printed symbols Illuminated or nonilluminated Sealed to IP9K ELECTRICAL
More informationA02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two
More informationTechnical Data, High Power 2-way* Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Environmental Data (acc.
Technical Data, High Power 2-way* Electrical Data Operating Voltage Operating Current Contact Resistance Voltage Proof Insulation Resistance Mechanical Data 48 VDC* see derating curve 2 mω max. 1000 VAC,
More informationSeries 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
More informationC&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
More informationDistinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationINDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches.
INDUSTRIAL CONTROLS E A01 SERIES Panel cut-out.630" (16mm) Description Products & features Specifications Illuminated or non-illuminated pushbutton switches Indicators Rotary lever switches eylock switches
More informationA02 SERIES ILLUMINATED OR NON-ILLUMINATED PUSHBUTTON SWITCHES Panel cut-out Ø22 or 29.5 x 21.5
ILLUMINATED OR NON-ILLUMINATED PUSHBUTTON SWITCHES Panel cut-out Ø22 or 29.5 x 21.5 A pushbutton assembly requires: screen + lamp (if illuminated) + operator + one or two switchblocks To order these elements,
More informationHMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch
Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More information