A1-A01-A02-A03 series Industrial controls

Transcription

1 A-A0-A0-A0 series Industrial controls Distinctive features The A0 and A0 series offer ranges of : - pushbutton switches, illuminated or not - indicators - or position keylock switches - or position rotary lever switches - emergency stop switches with rectangular, square or round operators. New! Custom engraved aluminium pushbutton switches, A series Switch enclosures Pushbutton switches and indicators, A0 series Environmental protection : IP65 Modular construction Electrical life : cycles min. Screen engraving or insertable legends on request Approvals UL 054 BS RIA 0 Shock & Vibration EN EN pending Each sub-assembly has to be ordered separately. A0 - A - A0 series Panel cut-out : Ø 6 mm (.60), except : - flush mount round : Ø mm (.866) - flush mount rectangular : 0.60 x 6.70 mm - flush mount square : 0.60 x 0.60 mm - A series : Ø mm (.866) - A0 series : round or square Ø (.866) flush mount : Ø 0 mm (.78),, and 4 poles Solder lug/quick-connect terminals Contacts : silver, gold plated Current/voltage rating : 6A 50VAC max. - 0mA 5VAC min. Lamp : filament, neon or LED A0 series Panel cut-out : - round or square : Ø mm (.866) - rectangular : 9,5 x,5 mm (.60x.846) - flush mount : Ø 0 mm (.78) and poles Screw terminals (optional : quick-connect term.) Contacts : silver Current/voltage rating : A 80VAC 6A 50VAC max. - 5mA 5VAC min. Lamp : filament, neon, LED or special multi-led array Option : end cap terminal guard. Order separately (see end of A0 series). Packaging unit : A : 5 pieces - A0 : 0 pieces (except pushbuttons: 5 pieces) - A0 : 5 pieces - A0 : 0 pieces. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. APEM -

2 A-A0-A0-A0 series Industrial controls Specifications for pushbutton, keylock and rotary switches ELECTRICAL SPECIFICATIONS A0 - A - A0 Function : Momentary Momentary or maintained action or maintained action Current/voltage rating : 0mA 5VAC min. 5mA 5VAC min. 6A 50VAC max. - 6A VDC max. A 80VAC - 6A 50VAC max. A VDC max. Contact gap > mm (.09) Double break x,5 mm (.059) Initial contact resistance : 0mΩ max. at A 4VDC 0mΩ max. at A 4VDC Insulation resistance : 50 MΩ min. 50 MΩ min. Dielectric strength : 750V between open contacts KV between open contacts 5KV live to accessible 4KV live to accessible Electrical life (resistive load) : cycles cycles Insulation : Class Class Lamp life : LED : h min. to 75% relative LED : h min. to 75 % relative luminosity - Filament : approx h luminosity - Filament : approx h Neon : approx h Neon : approx h A0 Lamp circuit diagrams A B A B ENERAL SPECIFICATIONS A0 - A - A0 A0 Min. mechanical life : Pushb. momentary : million cycles Pushb. momentary: million cycles Pushb. maintained : cycles Pushb. maintained : cycles Keylock and rotary : cycles Keylock and rotary : cycles Panel thickness 8 mm (.5) max. 8 mm (.5) max. Operating temperature : -0 C to +55 C -0 C to +85 C Solder heat resistance : 50 C, 5 sec. 50 C, 5 sec. (IEC 68--0Tb, method ) Degree of environmental IP 65 front of panel IP 65 front of panel protection (IEC 59 ) IP 40 back of panel IP 40 back of panel Lamps : Midget rooved T/4, Midget rooved T/4, filament, LED or neon filament, LED or neon Special multi-led array Switch terminals : Solder/quick-connect,8 mm (.0) M screws - wire x 0,75 mm max. Lamp terminals : Solder/quick-connect,8 mm (.0) M screws Flexible wire x,5 mm max. Rigid wire 4 mm max. Specifications for emergency stop switches : see pages 0 and. For screen engraving or film legends, contact APEM APEM

3 A series Engraved aluminium flush mounting pushbuttons and indicators Panel cut-out Ø (.866) A pushbutton assembly requires : engraved screen + lamp (if illuminated) + operator + switch block + flush mount bezel. To order these elements, select desired model numbers from the table below. Example : pushbutton, round, illuminated, sealed to IP65, latching, single pole with start engraving, 4V blue LED and flush mounting bezel = APCAX0K40. Ø5.00 (9.85 DIA) 4.5 (.57) 4.05 (.655).00 (.47) (.0) 8.5 (.5) 5. (.60).8 (.0) 0.5 (.00) A Switch Type P - pushbutton I - indicator Bezel C - round OTHER SCREEN ENRAVIN OPTIONS : contact APEM. Illumination A - illuminated B - non-illum. 0 - Front Fog Lights 0 - Rear Fog Lights 0 - Start 04 - Interior Light 05 - Boot Release 06 - Hazard Warning 07 - Lights 08 - Heating & Ventilation 09 - Map Lights 0 - Side Lights Sealing 0 - unsealed - sealed IP65 Function 0 - indicator X - latching Y - momentary Engraved Screen Options - Lock - Unlock - Rear Window Heating 4 - Cooling 5 - Wipers 6 - Washers 7 - Fan 8 - Horn 9 - Air recirculation 0 - Blank Switch block 0 - indicator - single pole - double pole 5 - three pole - four pole Accessories 0 - flushmount Bulb A - filament 6.V B - filament 4V C - filament 8V D - filament 6V E - filament 48V F - filament 60V - Neon 0V H - Neon 0V I - Led 6V red I - Led 6V green I - Led 6V amber J - Led V red J - Led V green J - Led V amber J4 - Led V blue J5 - Led V white K - Led 4V red K - Led 4V green K - Led 4V amber K4 - Led 4V blue K5 - Led 4V white L - Led 48V red L - Led 48V green L - Led 48V amber APEM -5

4 A0 series Illuminated or non-illuminated pushbutton switches Panel cut-out Ø 6 (.60) A pushbutton assembly requires : screen + lamp (if illuminated) + operator + switch block. To order these elements, select desired model numbers from tables below. Example : IP65 rectangular pushbutton, single pole, maintained, red screen and V red LED = A06B, A04M, A00X and A05BUL. 6.5 (.640) 9.00 (.54).00 (.47) (.654) (.94 ) 9.00 (.54) (.0) (.0) (.0) 8.40 (.0) C D 8.50 (.5) 8.50 (.) 4.00 C D E F x SQ) ( (.00).80 (.0) 0.70 (.09) Ø8.0 0 (.709 DIA) ❶ ❷ ❸ ❹ Screen Lamp Operator Switch block Bezel Colour Lamp Voltage Pole Bezel Description No of poles black red amber yellow green blue clear white black red amber yellow green blue clear white black red amber yellow green blue clear white A06A A06B A06C A06D A06E A06F A06 A06J A06A A06B A06C A06D A06E A06F A06 A06J A06A A06B A06C A06D A06E A06F A06 A06J Filament 6.V A04A Filament 4V A04B Filament 8V A04C Filament 6V A04D Filament 48V A04E Filament 60V A04F Neon 0V A04 Neon 0V A04H LED 6V red A04L LED 6V green A04L LED 6V amber A04L LED V red A04M LED V green A04M LED V amber A04M LED V blue A04M4 LED V white A04M5 LED 4V red A04N LED 4V green A04N LED 4V amber A04N LED 4V blue A04N4 ED 4V white A04N5 LED 48V red A04P LED 48V green A04P LED 48V amber A04P or Illum, momentary A00Y or Illum, maintained A00X or Non-illum, momentary A00Y or Non-illum, maintained A00X or 4 Illum, momentary A00Y or 4 Illum, maintained A00X or 4 Non-illum, momentary A004Y or 4 Non-illum, maintained A004X or Illum, momentary A005Y or Illum, maintained A005X or Non-illum, momentary A006Y or Non-illum, maintained A006X or 4 Illum, momentary A007Y or 4 Illum, maintained A007X or 4 Non-illum, momentary A008Y or 4 Non-illum, maintained A008X or Illum, momentary A009Y or Illum, maintained A009X or Non-illum, momentary A00Y or Non-illum, maintained A00X or 4 Illum, momentary A0Y or 4 Illum, maintained A0X or 4 Non-illum, momentary A0Y or 4 Non-illum, maintained A0X Single pole Double pole Three pole Four pole A05BUL A05BUL A055BUL A05BUL UNSEALED SWITCHES (IP40) : add 0 to end of operator model number. BI-COLOUR LED s optional. SCREEN ENRAVIN/INSERTABLE LEENDS : contact APEM Bezel: rectangular, square, round, Illum - illuminated, Non-illum - non illuminated -6 APEM

5 A0 series Indicators Panel cut-out Ø 6 (.60) An indicator assembly requires : screen + lamp + operator. To order these elements, select desired model numbers from tables below. Example : IP65 rectangular indicator with red screen and V red LED = A06B, A04M and A Ø (.709 DIA) (.654) (.94) 8.40 (.0) 8.50 (.5) (.00) (.0) ❶ ❷ ❸ Screen Lamp Operator Bezel Colour Lamp Voltage Bezel Description black red amber yellow green blue clear white black red amber yellow green blue clear white black red amber yellow green blue clear white A06A A06B A06C A06D A06E A06F A06 A06J A06A A06B A06C A06D A06E A06F A06 A06J A06A A06B A06C A06D A06E A06F A06 A06J Filament 6.V A04A Filament 4V A04B Filament 8V A04C Filament 6V A04D Filament 48V A04E Filament 60V A04F Neon 0V A04 Neon 0V A04H LED 6V red A04L LED 6V green A04L LED 6V amber A04L LED V red A04M LED V green A04M LED V amber A04M LED V blue A04M4 LED V white A04M5 LED 4V red A04N LED 4V green A04N LED 4V amber A04N LED 4V blue A04N4 LED 4V white A04N5 LED 48V red A04P LED 48V green A04P LED 48V amber A04P Indicator Indicator Indicator A07 A07 A07 UNSEALED INDICATORS (IP40) : add 0 to end of operator model number. SCREEN ENRAVIN / INSERTABLE LEENDS : contact APEM Bezel: rectangular, square, round APEM -7

6 A0 series Rotary lever switches Panel cut-out Ø 6 (.60) A rotary lever switch assembly requires : operator + switch block. To order these elements, select desired model numbers from tables below. Example : IP65 rectangular rotary switch with long lever, clockwise rotation, single pole, positions, maintained = A0909 and A05BUL..00 (.47) 4.00 (.0) (.654) (.94) 8.40 (.0) C D 8.50 (.) 4.00 C D E F x (.709 SQ) Ø (.709 DIA) 0.50 (.00).80 (.0) 0.70 (.09) ❶ ❷ Lever Positions B C Operator Pole Bezel Description Short lever Long lever or pos. maintained A0909 A0909 or pos. momentary A090 A090 or 4 pos. maintained A09 A09 or 4 pos. momentary A09 A09 or pos. maintained A0905 A0905 or pos. momentary A0906 A0906 or pos. mainl, momr A0907 A0907 or pos. moml, mainr A0908 A0908 or pos. maintained A09409 A0909 or pos. momentary A0940 A090 or 4 pos. maintained A094 A09 or 4 pos. momentary A094 A09 or pos. maintained A09405 A0905 or pos. momentary A09406 A0906 or pos. mainl, momr A09407 A0907 or pos. moml, mainr A09408 A0908 or pos. maintained A09609 A09509 or pos. momentary A0960 A0950 or 4 pos. maintained A096 A095 or 4 pos. momentary A096 A095 or pos. maintained A09605 A09505 or pos. momentary A09606 A09506 or pos. mainl, momr A09607 A09507 or pos. moml, mainr A09608 A09508 Switch block No of poles Single pole A05BUL Double pole A05BUL Three pole A055BUL Four pole A05BUL Lever Rotation - position switches The model numbers shown are for switches with clockwise lever rotation. For anticlockwise rotation, replace : 09 with 0 0 with 0 with 0 with 04 at the end of the model number. Optional Engraving on Lever end A See above photo left. To order, add WL to the end of the operator part No. Example : A09609WL.. Bezel: rectangular, square, round, pos - position, mainl - maintained left, momr - momentary right, etc -8 APEM

7 A0 series Keylock switches Panel cut-out Ø 6 (.60) A keylock switch assembly requires : operator + switch block. To order these elements, select desired model numbers from tables below. Example : IP65 rectangular keyswitch, clockwise rotation, single pole, positions, maintained = A085 and A05BUL..00 (.47) 4.00 (.0) (.654) (.496) 0.50 (.00) 8.40 (.0) C D.80 (.0) 8.50 (.) 4.00 C D E F x (.709 SQ) Ø (.709 DIA) 0.70 (.09) ❶ ❷ Key Positions B C Operator Pole Bezel Description Key removable or pos. maintained A08 A or pos. maintained A085 A-B or pos. momentary A084 A or 4 pos. maintained A087 A-B or 4 pos. momentary A088 A or pos. maintained A0805 A-B-C or pos. momentary A0806 A or pos. mainl, momr A0807 A-B or pos. moml, mainr A0808 A-C or pos. maintained A08 A or pos. maintained A085 A-B or pos. momentary A084 A or 4 pos. maintained A087 A-B or 4 pos. momentary A088 A or pos. maintained A0805 A-B-C or pos. momentary A0806 A or pos. mainl, momr A0807 A-B or pos. moml, mainr A0808 A-C or pos. maintained A08 A or pos. maintained A085 A-B or pos. momentary A084 A or 4 pos. maintained A087 A-B or 4 pos. momentary A088 A or pos. maintained A0805 A-B-C or pos. momentary A0806 A or pos. mainl, momr A0807 A-B or pos. moml, mainr A0808 A-C No of poles Single pole Double pole Three pole Four pole Switch block A05BUL A05BUL A055BUL A05BUL Key Rotation - position switches The model numbers shown are for switches with clockwise key rotation. For anticlockwise rotation, replace : 5 with 0 4 with 0 7 with 0 8 with 04 at the end of the model number. standard keys are supplied. 0 key barrel types available from stock. NON-REMOVABLE KEY POSITIONS / ON-ON-ON FUNCTION : contact APEM. A Bezel: rectangular, square, round, pos - position, mainl - maintained left, momr - momentary right, etc APEM -9

8 A0 series Emergency stop switches Panel cut-out Ø 6 (.60) Prominent 4 mm (.944) dia. or optional 40 mm (.575) dia. red mushroom actuator Highly reliable positive break switch Push to shut off switch, twist to reset to ON Approved to UL 054 / EN An emergency stop switch assembly requires : operator + switch block. To order, specify with single pole or double pole positive break switch block. N.C. eneral specifications Min. mechanical life : cycles (6 cycles per minute) Operating force / torque : 6 N / 0, Nm Operating temperature : -0 C to +55 C Solder heat resistance : 50 C, 5 secs (IEC Tb, method ) Degree of environmental protection (IEC 59) : IP65 front of panel, IP40 back of panel Switch terminals : solder/quick-connect,8 mm (.0) (IEC 68--0) Electrical specifications Current/voltage rating :,5A 50VAC AC-5 Contact gap : > mm (.8) Dielectric strength :.900V Electrical life : cycles.00 (.47) Ø4.00 (.945 DIA) (.654) (.047) 8.40 (.0) 5.0 (.60) C D Ø40.00 Option : SP version 0.50 (.00).80 (.0) ❶ ❷ Accessory 60 mm Ø Self Adhesive Label Description Yellow label with text Yellow label A0YL A0YL Description Operator No of poles Switch block 4 mm Ø Emergency stop A0ES 40 mm Ø Emergency stop A0ES SP Single pole Double pole A050BUL A054BUL -0 APEM

9 A0 series Emergency stop switches/mushroom head pushbutton switches Fitted in enclosures Prominent 40 mm (.575) dia. mushroom actuator, twist to release Highly reliable positive break switching on E-Stop Sealed to IP65 6A current rating Robust polycarbonate enclosures Knockouts for popular conduit sizes Double pole changeover switch blocks available for momentary/maintained mushroom head pushbuttons. N.C. Emergency stop Technical specifications Contact rating : Pushbutton switch : 6A 50VAC - E-Stop :,5A 50VAC Dimensions : 65 x 65 x 57 mm Electrical life : Pushbutton switch : cycles - E-Stop : cycles Operating temperature : -0 C to +55 C Momentary & maintained Ø40.0 (.575 DIA) 55.0 (.67) 7.5 (.689) 65.0 SQUARE (.56) Description Emergency stop Black momentary Red momentary Yellow momentary reen momentary Blue momentary Black maintained Red maintained Yellow maintained reen maintained Blue maintained A0ESSP54B + PEA0 A0MMASP5B + PEA0 A0MMBSP5B + PEA0 A0MMDSP5B + PEA0 A0MMESP5B + PEA0 A0MMFSP5B + PEA0 A0MXASP5B + PEA0 A0MXBSP5B + PEA0 A0MXDSP5B + PEA0 A0MXESP5B + PEA0 A0MXFSP5B + PEA0 OPTIONS A 50V versions or custom printing on mushroom head actuators : contact APEM. APEM -

10 A0 series Mushroom head pushbutton switches Panel cut-out Ø 6 (.60) Prominent 4 mm (.944) dia. or optional 40 mm (.575) dia. mushroom actuators Momentary and maintained functions Momentary function versions are unmarked. Maintained function versions are twist release (arrows indicate direction of twist) Various coloured mushroom actuators are available (.654) (.047) 8.40 (.0) C D Ø4.00 (.945DIA) Option OPTION : SP : SP VERSION version 0.50 (.00).80 (.0) Ø40.00 (.575 DIA) ❶ ❷ Operator Switch block Actuator Description No of poles 4mmØ Black momentary A0MMA 4mmØ Red momentary A0MMB 4mmØ Yellow momentary A0MMD 4mmØ reen momentary A0MME 4mmØ Blue momentary A0MMF 4mmØ Black maintained A0MXA 4mmØ Red maintained A0MXB 4mmØ Yellow maintained A0MXD 4mmØ reen maintained A0MXE 4mmØ Blue maintained A0MXF 40mmØ Black momentary A0MMA SP 40mmØ Red momentary A0MMB SP 40mmØ Yellow momentary A0MMD SP 40mmØ reen momentary A0MME SP 40mmØ Blue momentary A0MMF SP 40mmØ Black maintained A0MXA SP 40mmØ Red maintained A0MXB SP 40mmØ Yellow maintained A0MXD SP 40mmØ reen maintained A0MXE SP 40mmØ Blue maintained A0MXF SP Single pole Double pole Three pole Four pole A05BUL A05BUL A055BUL A05BUL - APEM

11 A-A0 series Industrial controls Accessories FLUSH MOUNTIN BEZELS Dark grey plastic material - supplied with sealing washer 8.0 (.7) 0.40 (.80) Ø (.60DIA).80 (.97).00 (.47) 9.80 (.7).00 (.47).80 (.97) ( ) ( ) ( ) Rectangular A0FM Square A0FM Round A0FM FLUSH MOUNTIN BEZELS Metal versions 8.5 (.75) Ø.00 (.866 DIA) Ø (.60DIA) Ø5.00 (.984 DIA) 8.0 (.7) 0.40 (.80) Ø (.60DIA).80 (.97) 8.5 (.75) Ø.00 (.866 DIA) Ø (.60DIA) Ø5.00 (.984 DIA).00 (.4) ( ).00 (.4) ( ) Round, anodised aluminium A0FMM Round, matt black A0FMM PCB SOCKET 5.00 (.96) 0.5 (.40) (.708) (.0) 4.5 (.67) (.708) (.0) 0.80 (.0).0 (.04) 4.5 (.67) Single pole, non illuminated Double pole, non illuminated Single pole, illuminated Double pole, illuminated Indicator Single pole, E-stop Double pole, E-stop A0PC A0PC A0PC A0PC4 A0PC5 A0PC6 A0PC7 FLAPUARDS (.47).50 (.5) (.5) 9.00 (.54) (.708).65 (.57).65 (.57) Rectangular A0F Square/round A0F APEM -

12 A-A0 series Industrial controls Accessories METAL UARDS Slot as alternative to Ø mm hole - Material : mm thick aluminium. Ø8.0 (.7 DIA) Ø.00 (.078DIA) (.708).00 (.47) (.708).00 (.47) 8.0 (.77) 8.0 (.77) 4.00 (.944) 0.5 (.99) Ø (.60DIA) ANTI ROTATION RIN Rectangular A0M Square A0M Round, natural A0M Matt black A0M Recommended to prevent product rotation Ø (.69DIA) (.708) 4.75 (.580) A0LW (.708).00 (.078) ALUMINIUM SCREENS For non-illuminated pushbuttons For illuminated pushbuttons 5.00 (.97) 5.00 (.97) Ø5.00 (.59 DIA) Ø.00 Ø5.00 (.59 DIA) 8.0 (.77) Ø9.60 (.77 DIA) Ø (.60DIA) Ø6.05 (.6DIA) SWITCHBLOCK TERMINAL UARDS A06AL A06AL 7.5 (.89) 7.45 (.9) 0.75 (.86) 0.75 (.86) (.4) (.9) 4.85 (.584) (.4) (.9) 8.50 (.4) 0.75 (.86) BLANKIN PLUS way A0RTC 8 way A0RTC8 Ø8.0 (.709 DIA) (.946) Round A0 Square A0 Rectangular A0 RESISTOR ASSEMBLY Resistor assembly - stage illumination A05B + RISSP (DIM) normally closed (BRIHT) normally open -4 APEM

13 A-A0 series Industrial controls Modular construction / panel mounting Installation - tools PUSHBUTTONS & INDICATORS SCREEN PANEL CUT-OUT Round & square operators only EMERENCY STOP ROTARY LEVER SWITCHES KEYLOCK SWITCHES LEEND REFLECTOR Ø 0.00/+0.0 (.69 DIA.000/+.0) LOCATIN SLOT BULB POLARISIN DOT PANEL SEAL 7.5 (.85).50 (.059) Rectangular operators only FIXIN NUT OPERATOR 4.00 Maxi (.57 MAX) Ø 0.00/+0.0 (.69 DIA.000/+.0) Ø.00 (.078 DIA) LATCH SWITCH BLOCK 0.50 (.4) Max. panel thickness : 8 mm (.5) PANEL MOUNTIN ASSEMBLY Drill/punch hole shaped as above. Assemble front operator through hole, fit fixing nut and tighten to a maximum torque of 0,8Nm using tool No Wire chosen switch block as required and slide onto operator until latch engages. Fit bulb if required using tool No Snap screen onto reflector assembly with legend in between if required and snap onto front operator TAKIN CARE TO LINE UP THE LOCATIN SLOT WITH THE POLARISIN DOT, and not to damage the seal. TO REMOVE BULB Remove reflector/screen assembly. Use the bulb extractor to remove the bulb. SWITCH BLOCK To assemble switch block to front operator, TAKE CARE TO LINE UP SWITCH BLOCK WITH FRONT OPERATOR. Once in position, slide on to front operator. NB. : Ensure latch is fully engaged correctly onto the switch block. To remove switch block, depress the latch and slide the switch block off the operator. FIXIN NUT KEY BULB REMOVER APEM -5

14 A0 series Industrial controls Installation Modular construction / panel mounting PUSHBUTTONS & INDICATORS SCREEN PANEL CUT-OUT LEEND Round & square operators EMERENCY STOP ROTARY LEVERS SWITCHES KEYLOCK SWITCHES REFLECTOR LOCATIN SLOT BULB POLARISIN DOT PANEL SEAL FIXIN NUT Maxi (.6 MAX) Ø /+0.50 (.866 DIA.000/+.09) Rectangular operators.00 (.8).00 (.5) OPERATOR ADAPTOR BLOCK SWITCH BLOCK /+0.50 ( /+.09 ) /+0.50 (.6.000/+.09) END CAP PANEL CLAMP FIXIN SCREW Max. panel thickness : 8 mm (.5) PANEL MOUNTIN ASSEMBLY Drill/punch hole in panel as shaped above. Assemble front operator through hole and : a/ Round & square types : tighten nut to a maximum torque of 0,8Nm using tool No Snap on adaptor block b/ Rectangular types : tighten two panel fixing screws in front to a maximum torque of 6cNm. Wire chosen switch block as required and snap onto front operator. Snap end cap onto switch block. Fit bulb if required using tool No Snap screen onto reflector assembly with legend in between if required ans snap into front operator TAKIN CARE TO LINE UP THE LOCATIN SLOT WITH THE POLARISIN DOT, and not to damage the seal. TO REMOVE BULB Remove reflector/screen assembly. Use the bulb extractor to remove the bulb. TO REMOVE SWITCH BLOCK Lever out latches using small screwdriver taking care not to overbend, and pull off the block from the front operator. A0 Accessories : End cap terminal guard offering unique terminal protection. 6.5 mm push on tab terminals. Specify SP to the end of the switchblock and operator P/N. Example : A050SP APEM

15 A0 series Illuminated or non-illuminated pushbutton switches and indicators Panel cut-out Ø (.866) or 0 (.8) - Plastic or metal flush mounting bezel A pushbutton assembly requires : screen + lamp (if illuminated) + operator + switch block. To order these elements, select desired model numbers from tables below. Example : IP65 flush mounting round pushbutton, maintained function, red screen, V red LED and single pole switch block = A04X, A06B, A04M and A05BUL. Ø9.00 (.4 DIA) Ø5.00 (.79 DIA) (.9) (.04) (.5) (.44).0 to 6.0 Panel Thickness 0.00 (.94).00 (.079) 0.50 (.0) ❶ ❷ ❸ ❹ Screen Lamp Operator Switch block Bezel Colour Lamp Voltage Bezel Description Lamp type No of poles black red amber yellow green blue clear white A06A A06B A06C A06D A06E A06F A06 A06J Filament 6.V A04A Filament 4V A04B Filament 8V A04C Filament 6V A04D Filament 48V A04E Filament 60V A04F Neon 0V A04 Neon 0V A04H LED 6V red A04L LED 6V green A04L LED 6V amber A04L LED V red A04M LED V green A04M LED V amber A04M LED V blue A04M4 LED V white A04M5 LED 4V red A04N LED 4V green A04N LED 4V amber A04N LED 4V blue A04N4 LED 4V white A04N5 LED 48V red A04P LED 48V green A04P LED 48V amber A04P Plastic illum, momentary Lamp/LED bulb A007Y Plastic illum, maintained Lamp/LED bulb A007X Plastic non-illum, momentary A009Y Plastic non-illum, maintained A009X Metal illum, momentary Lamp/LED bulb A00Y Metal illum, maintained Lamp/LED bulb A00X Metal non-illum, momentary A0Y Metal non-illum, maintained A0X F/mount illum, momentary Lamp/LED bulb A04Y F/mount illum, maintained Lamp/LED bulb A04X F/mount non-illum, momentary A05Y F/mount non-illum, maintained A05X Plastic indicator A075 Metal indicator A077 F/mount indicator A079 UNSEALED SWITCHES (IP40) : add 0 to end of operator model number. SCREEN ENRAVIN / INSERTABLE LEENDS : contact APEM. Single pole Double pole Three pole Four pole A05BUL A05BUL A055BUL A05BUL Bezel: round. Illum - illuminated, Non-illum - non illuminated APEM -5