Anti vandal switch.

Size: px
Start display at page:

Download "Anti vandal switch."

Transcription

1 Anti vandal switch

2 Anti-vandal series comparison Cutout Diameter / Depth Functions available type Actuator options Dot illumination Ano diz e d Stainless s Gold plated brass Nickel plated brass Illum. Options Options RoHS compliant Water resistant (IP65 Min.) Bi- illumination Ring illumination aluminum te el V19 Vs19 short body Diameter: 19mm Max. Depth: 10mm 1 Pole: Off-(On) On-(Off) Screw Solder High Flat Domed V16 Diameter: 16mm Max. Depth: 6mm 1 Pole: Off-(On) On-(Off) Screw Solder High Flat Domed 1 Pole: On-On L16 Diameter: 16mm On-(On) Max. Depth: 10mm 2 Pole: Solder On-On On-(On) High Flat Concave Guarded L19 L19A Ls19 L19M Micro trip Diameter: 19mm Max. current 21A Max. Depth: 10mm L19B Big current L19Y Big current for Marine 1 Pole: On-On On-(On) 2 Pole: On-On On-(On) 1P Off-(On) + 1P On-(Off) Screw Solder Flat 1 Pole: High Diameter: 22mm Off-(On) Screw V22 Flat Max. Depth: 10mm On-(Off) Solder Domed V12 Diameter: 12mm Max. Depth: 6mm 1 Pole: Off-(On) Screw Solder Domed High Ls16 Diameter: 16mm Max. Depth: 9mm 1 Pole: Off-(On) Solder Flat L22 L22A Diameter: 22mm L22B Big current Max. current 21A Max. Depth: 10mm L22M Micro-trip 2 Pole: 1P Off-(On) + 1P On-(Off) Screw Solder Flat L25 Diameter: 25mm Max. Depth: 12mm 2 Pole: 1P Off-(On) + 1P On-(Off) 4 Pole: 2P Off-(On) + 2P On-(Off) Solder Flat Anti vandal switch

3 Anti vandal switch Degree of protection to EN60529/DIN 0470 IP X X Table l Table ll IP Ratings Guide The IP classification system designates the degree of protection provided by an enclosure against solid objects or water ingress. Table shows degrees of protection against solid objects. Table ll shows degrees of protection against water. Ex) IK 08 Class Mechanical Impact Resistance Yueqing Langir Electric Co., Ltd. Catalogue 1

4 Anti vandal indicator Φ8mm 12mm Anti-Vandal IK09/ Sealed IP65 Variety Of s Brass/ Stainless steel P8-P-N-D-G Illumination Led- Illumination Style Voltage Series Options Options Options Options Options P8 (8mm) P- Solder lug N- Nickel plated brass D- Dot illum. W- White 6-6V P12 (12mm) (1.8x0.4) S- Stainless steel Y- Yellow 12-12V B- Blue 24-24V G- Green R- Red O- Orange Technical Data P12-P-N-D-R Type P8 P12 Pin(1.8X0.4mm) Dielectric Strength 1100VAC Operation Temp. -20 ~ Nm IK10 Lampshade PC Nickel Plated Brass Base PBT Type Indicator Voltage 6V/ 12V/ 24V Life Approx.40,000 hours Note: additional available upon request. P12 P8 2

5 Anti vandal switch Φ 12mm Anti-Vandal IK09/ Sealed IP65 Function 1,000,000 Cycles Momentary Actuator Actuator Function Variety Of s Series Options Options Options Options Options V12 B- Round P- Solder lug(2.0x0.5) NONE- Screw Technical Data NONE- Momentary S- Stainless steel W- White 1NO N- Nickel plated brass Y- Yellow A- Zin-Al alloy B- Blue black color G- Green R- Red BK- Black Type Illuminated Options Front Shape Max. Switch Rating Contact Resistance Insulation Resistance Dielectric Strength Operation Temp. Contact Operation Pressure Actuator Base Actuator(Zn-Al.alloy) V12-B/S V12-B/N Non-illuminated Round Screw/ Pin (2.0X0.5) 2A 48VDC 50mΩ 1000mΩ 2000VAC -20 ~+55 1,000,000 Cycles 200,000 Cycles 5~14Nm approx. 5N IP65/ IK08 Stainless Steel/ Brass/ PBT Stainless Steel/ Brass/ Zin-Al Alloy PBT V12-B/A Yueqing Langir Electric Co., Ltd. Catalogue 3

6 Anti vandal switch Φ 12mm Applications / Markets Yacht Controls Security Devices Industrial Controls Kiosks Electrical Housewares Medical Equipment RoHS Specifications Electrical Rating: 2A36VDC : 200,000 Cycles : 50,000 Cycles Contact Resistance: 50m Max. Insulation Resistance: 1000 M Min. Dielectric Strength: 2,000VAC Operating/Storage Temperature: -20 C to 55 C Travel: 1.50mm Moisture : IP65 Actuation Force: 4N Panel Thickness: 1-11mm Mounting Nut : 5-14Nm Features & Benefits 12mm diameter panel cutout Variety LED option Dot, ring illumination available Multiple actuator options Pilot indicator option IP65 rated, Momentary Off-(On), Latching Off-On Illumination Led- Illumination Actuator Function Rating Style Voltage Series Options Options Options Options Options Options Options Options L12 F - Flat Solder Lug M - Momentary NONE - Max. S - Stainless NONE - Non- NONE - Non- 0 - Base Voltage* H - High Off-(On) 2A36V DC Steel Illuminated Illuminated 6-6V Z - Latching B - Nickel D - Dot W - White 12-12V Off - On Illumination R - Red 24-24V R - Ring Illumination O - Orange G - Green B - Blue Y - Yellow NOTES: * Base voltage on LEDs: 20mA for Red, Yellow and Orange LED colors 20mA for Blue, Green and White LED colors Specifications subject to change without notice 4

7 Anti vandal switch Φ 12mm [ in] [0.433 in] [0.511in] 9.00 [0.354in] ACTUATOR RING ILLUMINATION (OPTIONAL) Panel Cutout Schematic & Actuator 1 2 (FORWARD) 1.80 [0.071 in] 1 2 (REVERSE) Non Illum. Schematic Schematic FLAT ACTUATOR HIGH ACTUATOR Illumination options [0.118 in] [0.511in] [0.433 in] [0.433 in] 7.40 [0.291 in] Non-illuminated Dot-illuminated Ring-illuminated Yueqing Langir Electric Co., Ltd. Catalogue 5

8 Anti vandal switch Φ 12mm Non-illuminated (14.0) (14.0) (9.0) (9.0) (3.5) (1.5) (16.7) (21.7) (3.5) (1.5) (16.7) (19.7) M12X (0.030) M12X (0.030) (2.0) (0.5) (2.0) (0.5) Latching Momentary Ring-illuminated (14.0) (14.0) (25.0) (7.4) (7.4) (3.5) (1.5) (3.5) (1.5) (29.0) (16.7) (19.7) M12X (0.030) M12X (0.030) Illum terminals (2.5) (2.5) (0.5) (2.0) (0.5) (3.2) Latching Momentary Illum terminals (7.2) Dot-illuminated (14.0) (14.0) (25.0) (29.0) (9.0) (9.0) (3.5) (1.5) (3.5) (1.5) (16.7) (19.7) M12X (0.030) M12X (0.030) (2.5) (0.5) Latching Illum terminals Illum terminals (2.0) (3.2) (2.5) (0.5) Momentary (7.2) 6

9 Anti vandal switch Φ16 mm Anti-Vandal IK09/ Sealed IP65 Normal Open/ Normal Closed Domed/ Flat/ High Flat Stainless Steel/ Brass 1,000,000 Cycles Momentary Function Series Actuator Function Options Options Options Options Marking Options V16 F- Flat P- Solder lug Momentar y H- High (2.8x0.5) 1- NO B- Domed NONE- Screw 2- NC* S- Stainless steel N- Nickel plated brass Custom Markings available A- Anodized aluminum* G- Gold plated brass NOTES: * NC: Screw terminal only * Anodized aluminum: Variety of colors(moq 500pcs/color), standard color for black Technical Data Type V16-F V16-B V16-H Actuator Options Flat Domed High Flat Screw/ Pin (2.8X0.5) Max.Switch Rating 2A 48VDC Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 Contact 1,000,000 Cycles 200,000 Cycles Operation Pressure 5~14Nm approx. 4N IP65/ IK08 Actuator Base Stainless steel/ Gold or Nickel plated brass/ Anodized aluminum Stainless steel/ Gold or Nickel plated brass/ Anodized aluminum PBT Yueqing Langir Electric Co., Ltd. Catalogue 7

10 Anti vandal switch Φ19 mm Anti-Vandal IK09/ Sealed IP65 Normal Open/ Normal Closed Domed/ Flat/ High Flat Stainless Steel/ Brass 1,000,000 Cycles Momentary Function Series Actuator Function Options Options Options Options Marking Options V19 F- Flat P- Solder lug Momentar y H- High (2.8x0.5) 1- NO B- Domed NONE- Screw 2- NC* S- Stainless steel N- Nickel plated brass Custom Markings available A- Anodized aluminum* G- Gold plated brass NOTES: * NC: Screw terminal only * Anodized aluminum: Variety of colors(moq 500pcs/color), standard color for black Technical Data Type V19-F V19-B V19-H Front Shape Flat Domed High Flat Screw/ Pin (2.8X0.5) Max.Switch Rating 2A 48VDC Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 Contact 1,000,000 Cycles 200,000 Cycles Operation Pressure 5~14Nm approx. 5N IP65/ IK09 Actuator Base Stainless steel/ Gold or Nickel plated brass/ Anodized aluminum Stainless steel/ Gold or Nickel plated brass/ Anodized aluminum PBT 8

11 Anti vandal switch Φ19 mm(short body) Anti-Vandal IK09/ Sealed IP65 Normal Open/ Normal Closed Domed/ Flat/ High Flat Stainless Steel/ Brass 1,000,000 Cycles Momentary Function Series Actuator Function Options Options Options Options Marking Options Vs19 F- Flat P- Sol der lug Momentary H- High (2.8x0.5) 1- NO B- Domed NONE- Screw 2- NC* S- Stainless steel N- Nickel plated brass Custom Markings available A- Anodized aluminum* G- Gold plated brass NOTES: * NC: Screw terminal only * Anodized aluminum: Variety of colors(moq 500pcs/color), standard color for black Technical Data Type Vs19-F Vs19-B Vs19-H Actuator Options Flat Domed High Flat Screw/ Pin (2.8X0.5) Max.Switch Rating 2A 48VDC Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 Contact 1,000,000 Cycles 200,000 Cycles Operation Pressure 5~14Nm approx. 5N IP65/ IK09 Actuator Base Stainless steel/ Gold or Nickel plated brass/ Anodized aluminum Stainless steel/ Gold or Nickel plated brass/ Anodized aluminum PBT Yueqing Langir Electric Co., Ltd. Catalogue 9

12 Anti vandal switch Φ22 mm Anti-Vandal IK09/ Sealed IP65 Normal Open/ Normal Closed Domed/ Flat/ High Flat Stainless Steel 1,000,000 Cycles Momentary Function Series Actuator Function Options Options Options Options Marking Options V22 F- Flat P- Solder lug Momentar y S- Stainless steel H- High (2.8x0.5) 1- NO Custom Markings available B- Domed NONE- Screw Technical Data Type V22-F V22-B V22-H Front Shape Flat Domed High Flat Screw/ Pin (2.8X0.5) Max.Switch Rating 2A 48VDC Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 Contact Operation Pressure Actuator 1,000,000 Cycles 200,000 Cycles 5~14Nm approx. 5.5N IP65/ IK09 Stainless Steel Stainless Steel Base PBT 10

13 Anti vandal switch Φ16 mm Anti-Vandal IK09/ Sealed IP65 IIIuminated And Non-Illuminated Flat/Concave Momentary/ Latching Variety Of s Momentary: When you push switch and then move your finger, the actuator will back to the original position. Latching: When you push switch once it will change state and stay in this pushed-down position and will not come back to original position unless you push it again. Illumination Led- Illumination Actuator Function Style Voltage Series Options Options Options Options Options Options Options L16 F- Flat NO NE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V NONE- IP40 H- Raised lug (2.8x0.5) 1-1NO1NC N- Nickel plated brass R- Ring illum. Y- Yellow 12V IP65 2-2NO2NC A- Anodized aluminum* NONE- non-illum. B- Blue 24V Z- Latching G- Green 36V 1-1NO1NC R- Red 110V 2-2NO2NC NOTES: O- Orange 220V * Anodized aluminum: Variety of colors(moq 500pcs/color), standard color for black Operation Description Technical Data Type L16-F/L16s-F L16-F/R L16-F/D llluminated Type Non-llluminated Ring Dot Pin (1.8X0.4) Max.Switch Rating Ith: 3A Ui: 250VAC Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp. -20 ~+55 Contact 200,000 Cycles >50,000 Cycles 5~14Nm Operation Pressure approx. 3~5N IP40,IP65/ IK09 Button Stainless steel/ Nickel plated brass/ Anodized aluminum Bodey Base Stainless steel/ Nickel plated brass/ Anodized aluminum PBT Type LED Voltage Life 6V/ 12V/ 24V/ 36V/ 110V/ 220V Approx: 40,000 hours Illuminated Options (10.3) (20.5) (29.2) (34.8) (18.0) (5.0) (10.3) (3.5) (35.7) (1.5) Actuator Options Illumination (0.4) (1.8) s (2.6) (5.0) (15.9) (10.8) Yueqing Langir Electric Co., Ltd. Catalogue 11

14 Anti vandal switch Φ16 mm Anti-Vandal IK08/ Sealed IP65 Illuminated Momentary Variety Of s Illumination Led- Illumination Actuator Function Style Voltage Marking Series Options Options Options Options Options Options Options Options Operation Switch terminals blank LED terminals marked + and Ls16 F- Flat NONE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V lug (2.8x0.5) 1-1NO N- Nickel plated brass R- Ring illum. Y- Yellow 12V Custom Markings available A- Anodized aluminum* NONE- non-illum. B- Blue 24V G- Green 36V R- Red 110V NOTES: O- Orange 220V * Anodized aluminum: Variety of colors(moq 500pcs/color), standard color for black Technical Data Type Ls16-F Ls16-F/R Ls16-F/D Illuminated Options Non-Illuminated Ring Dot Pin (2.8X0.5) Max. Switch Rating 2A 36VDC Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 1,000,000 Cycles 200,000 Cycles 5~14Nm approx. 3~5N IP65/ IK08 Contact Operation Pressure Actuator Base Type Voltage Life Stainless steel/ Nickel plated brass/ Anodized al uminum Stainless steel/ Nickel plated brass/ Anodized alumi num PBT LED 6V/ 12V/ 24V/ 36V/ 110V/ 220V Approx, 40,000 hours Current-limiting Operating Voltage(U) 6V 12V 24V 36V Formula Resistance 210Ω, 1/4W 510Ω, 1/2W 1.2kΩ, 3/4W 2.2kΩ, 1W U-Ue Configuration Current-limiting R= Table Resistance(R) 160Ω, 1/4W 460Ω, 1/2W 1.2kΩ, 3/4W 2.2kΩ, 1W le IIIuminated Options Actuator Options 12

15 Anti vandal switch Φ19 mm Anti-Vandal IK09/ Sealed IP65 Illuminated And Non-Illuminated Momentary/ Latching Variety Of s Momentary: When you push switch and then move your finger, the actuator will back to the original position, Latching: When you push Switch once it will change state and stay in this pushed-down position and will not come back to oniginal position unless you push it again. Illumination Led- Illumination Actuator Function Style Voltage Marking Series Options Options Options Options Options Options Options Options Operation Description L19 F- Flat NO NE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V lug (2.8x0.5) 1-1NO1NC A- Anodized aluminum* R- Ring illum. Y- Yellow 12V Custom Markings available N- Screw L- Latching NONE- non-illum. B- Blue 24V 1-1NO1NC G- Green 36V NOTES: R- Red 110V * Anodized aluminum: Variety of colors(moq 500pcs/color), standard color for black O- Orange 220V Technical Data Type L19-F L19-F/R L19-F/D Illuminated Options Non-Ill minated Ring Dot Screw and Pin (2.8X0.5) Switch terminals Max. Switch Rating Ith: 5A Ui: 250VAC 1, 2 for NC and 3, 4 for NO Contact Resistance 50mΩ LED terminals marked + and - Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 Contact 1,000,000 Cycles 50,000 Cycles Operation Pressure 5~14Nm approx. 5N IP65 or IP67/ IK09 Actuator Base Type Voltage Life Stainless steel/ Anodized alumi num Stainless steel/ Anodized alumi num PBT LED 6V/ 12V/ 24V/ 36V/ 110V/ 220V Approx, 40,000 hours MOMENTARY LATCHING Yueqing Langir Electric Co., Ltd. Catalogue 13

16 Anti vandal switch Φ19 mm Anti-Vandal IK09/ Sealed IP65 Illuminated And Non-Illuminated Variety Of s Momentary/ Latching Momentary: When you push switch and then move your finger, the actuator will back to the original position, Latching: When you push Switch once it will change state and stay in this pushed-down position and will not come back to oniginal position unless you push it again. Illumination Led- Illumination Actuator Function Style Voltage Marking Series Options Options Options Options Options Options Options Options L19A F- Flat NO NE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V lug (2.8x0.5) 1-1NO1NC A- Anodized aluminum* R- Ring illum. Y- Yellow 12V Custom Markings available 2-2NO2NC NONE- non-illum. B- Blue 24V Z- Latching G- Green 36V 1-1NO1NC R- Red 110V NOTES: 2-2NO2NC O- Orange 220V * Anodized aluminum: Variety of colors(moq 500pcs/color), standard color for black Operation Description Technical Data Type L19A-F L19A-F/R L19A-F/D Illuminated Options Non-Illuminated Ring Dot Pin (2.8X0.5) Max. Switch Rating Ith:5A Ui:250VAC Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 1,000,000 Cycles 50,000 Cycles Contact 5~14Nm approx. 5N IP65/ IK09 Operation Pressure Actuator Base Type Voltage Life Stainless Steel/ *Anodized Alumi num Stainless Steel/ *Anodized Alumi num PBT LED 6V/ 12V/ 24V/ 36V/ 110V/ 220V Approx, 40,000 hours 14

17 Micro-trip anti vandal switch Φ 19mm Anti-Vandal IK09/ Sealed IP65 Illuminated And Non-Illuminated Momentary Variety of s Illumination Led- Illumination Actuator Function Style Voltage Marking Series Options Options Options Options Options Options Options Options Operation Description Technical Data L19M Micro-trip F- Flat NONE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V lug (2.8x0.8) 1-1NO R- Ring illum. Y- Yellow 12V Custom Markings available N- Screw NONE- non-illum. B- Blue 24V G- Green 36V R- Red 110V O- Orange 220V Type L19M-F L19M-F/R L19M-F/D Illuminated Options Non-Illuminated Ring Dot Screw and Pin (2.8X0.8) Max. Switch Rating A 24VDC Contact Resistance LED terminals marked+and - 0mΩ Switch terminals unmarked. Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp - 0 to+ 1,000,000 Cycles 50,000 Cycles Contact Rear Nut Fixing 0.57Nm Operation Pressure approx. 8N IP65/ IK09 Switch Assembly UL94V-0 Rated Polyamide (Nylon) Tags Copper Alloy s Copper Alloy Switch & Button Stainless Steel/ *Anodized Aluminum Lens and Lens Polycarbonate Internal Seal Silicone O Ring Nitrile Type LED Voltage 6V/ 12V/ 24V/ 36V/ 110V/ 220V Life Approx, 40,000 hours (14.0) (22.0) L (32.7) (14.0) (2.0) L (31.0) Dot (9.0) Ring (12.0) (9.40) (M19X1.0) Yueqing Langir Electric Co., Ltd. Catalogue 15

18 Big current anti vandal switch Φ 19mm Big range current: 3A 5A 8A 10A (15A)16A 20A(21A) Snap action, compact design, suit for small space Variety Of s Anti-Vandal IK09/ Sealed IP65 Illuminated and Non-Illuminated Illumination Led- Illumination Actuator Function Current Style Voltage Marking Series Options Options Options Options Options Options Options Options Options L19B F- Flat NONE- quick M- Momentary A S- Stainless steel D- Dot illum. W- White 6V connect terminal 1 1NO (SPST) 03-3A R- Ring illum. Y- Yellow 12V Custom Markings available (6.35X0.8) 2 1NC (SPST) 05-5A NONE- non-illum. B- Blue 24V 3 1NO1NC (SPDT) 08-8A G- Green 36V Z- Latching 10-10A R- Red 110V 1 1NO (SPST) 16-16A O- Orange 220V 2 1NC (SPST) 21-21A D6-0.6A/ 125VDC 3 1NO1NC (SPDT) D3-0.3A/ 250VDC 250VAC/125VAC Operation Technical Data Type L19B-F L19B-F/R L19B-F/D 1 2 NC Illuminated Options Non-Illuminated Ring Dot 3 NO PIN (6.35X0.8) C C Max. Switch Rating 3A 5A 8A 10A 15A(16A) 20A(21A)/ 250VAC, 125VAC 0.6A/ 125VDC 0.3A/ 250VDC Contact Resistance Insulation Resistance Dielectric Strength Shock resistance Vibration Resistance Ambient Temp. Contact Operation Pressure 25m 100m Illuminated Actuator Stainless Steel Stainless Steel Between non-consecutive terminals 1,000Vrms, 50/60Hz for 1min Between non-current carrying metal parts and each terminal 1,500Vrms, 50/60Hz for 1min Between ground and each terminal 1,500Vrms, 50/60Hz for 1min Detruction: O.F.>0.5N: 1000m/s2 (approx. 100g), O.F. 0.5N: 400m/s2 (approx. 40g) Malfunction: O.F.>0.5N: 200m/s2 (approx. 20g), O.F. 0.5N: 100m/s2 (approx. 10g) 10-50Hz, 1.5mm Double Amplitude -25 ~+85 2,000,000cycles 50,000cycles 5~14Nm 10N IP65/ IK09 Type LED Voltage 6V/ 12V/ 24V/ 36V/ 110V/ 220V R G Y O B W Life Approx. 40, 000hours 16

19 Big current anti vandal switch Φ 19mm 端子种类 types 快接端子 #250(t=0.8) Quick-connect terminal #187 端子尺寸 Dimenesions 下公共端 Bottom common terminal Contact type 公共端类型 Common terminal types 转换式 SPDT 常闭式 SPST-NC 常开式 SPST-NO 公共端在底部 Bottom common terminal M19X M19X MOMENTARY LATCHING Yueqing Langir Electric Co., Ltd. Catalogue 17

20 Big current anti vandal switch Φ 19mm Applications / Markets Yacht Controls Security Devices Industrial Controls Kiosks Car Controls Medical Equipment RoHS Specifications Electrical Rating: 21A, 24VDC : 1,000,000 Cycles : 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance: 1000 MΩ Min. Dielectric Strength: 2,000VAC Operating/Storage Temperature: -20 C to 55 C Travel: 1.50mm Moisture : IP67 Actuation Force: 4N Panel Thickness: 1-11mm Mounting Nut : 5-14Nm Features & Benefits 19mm diameter panel cutout Variety LED option Dot, ring or power symbol illumination available Multiple actuator options Pilot indicator option IP65 rated, Momentary Off-(On), Latching Off-On Output type: NPN Illumination LED- Illumination Actuator Function Rating Style Voltage Graphic Series Options Options Options Options Options Options Options Options (Optional) L19Y F - Flat C - Cable* M - Momentary NONE - Max. S - Stainless Steel NONE - Non- NONE - Non- Illuminated NONE - Non-Illuminated M01 - Power H - High Off-(On) 21A24V DC A - Black Anodized Illuminated W - White 1 - Base Voltage** symbol laser Z - Latching D - Dot R - Red etched Off - On Illumination R - Ring Illumination O - Orange G - Green B - Blue Y - Yellow RG - Red/Green RB - Red/Blue NOTES: ( ) denotes function is momentary * Cable length 1200mm ** The base voltage for rating Specifications subject to change without notice 18

21 Big current anti vandal switch Φ 19mm 15.8 [0.62 in] [0.54 in] ACTUATOR [0.866 in] RING ILLUMINATION (OPTIONAL) 1.80 [.07 in] R M19X (FORWARD) (REVERSE) 90±1.0 [3.54±.04 in] Schematic [ in] Non Illum. Schematic Panel Cutout 2.0 [0.079 in] 9.00 [.354 in] 1200±20.0 [47.24±.79 in] 40±1.0 [1.57±.04 in] HIGH ACTUATOR Non-illum. Dot-illum. Ring-illum. Lens Options MAX. 21ADC LOAD FLAT ACTUATOR 12~24VDC 12~24VDC Important: Proper wiring must be followed! Improper wiring may cause damage to switch FUSED BATTERY OR CIRCUIT BREAKER PROTECTED DISTRIBUTION PANEL Yueqing Langir Electric Co., Ltd. Catalogue 19

22 Anti vandal switch Φ 19mm Anti-Vandal IK08/ Sealed IP65 Illuminated Momentary Variety Of s Operation Illumination Led- Illumination Actuator Function Style Voltage Marking Series Options Options Options Options Options Options Options Options Actuator Current Illuminated Marking Series Options Function Voltage Finish Options Voltage Current Ls19 F- Flat NO NE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V lug (2.0x0.5) 1-1NO A- Anodized aluminum* R- Ring illum. Y- Yellow 12V Custom Markings available L19B F- Flat 4.75X0.8(#187) quick connect/ Solder terminal(t=0.8) blank M- Momentary A S- Stainless Steel D- Dot NONE- non-illum. W- B- White Blue 6V 24V T- 4.75X0.5(#187) quick connect/ Solder terminal(t=0.5) 1 1NO (SPST) 03-3A R- Ring Y- G- Yellow Green 12V Custom Markings Available 36V U- 6.35X0.8(#250) quick connect terminal (T=0.8) NOTES: 2 1NC (SPST) 05-5A Non-Illuminated blank B- R- Blue 24V D- Side common terminal for terminal #187 and #250 Red 110V 3 1NO1NC (SPDT) 08-8A G- Green 36V L- Screw terminal * Anodized aluminum: Variety of colors(moq 500pcs/color), standard for black anodized O- Orange 220V Z- Latching 10-10A R- Red 110V 1 1NO (SPST) 16-16A O- Orange 230V Technical 2 1NC (SPST) Data 21-21A D6-0.6A/ 125VDC 3 1NO1NC (SPDT) D3-0.3A/ 250VDC Type Ls19-F Ls19-F/R Ls19-F/D Illuminated Options Non-Illuminated Ring Dot Pin (2.8X0.5) Max. Switch Rating 2A 36VDC Switch terminals blank LED terminals marked + and Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 1,000,000 Cycles 200,000 Cycles 5~14Nm approx. 3~5N IP65/ IK08 Contact Operation Pressure Actuator Base Type Voltage Life 250VAC/125VAC Stainless Steel/ *Anodized Aluminum Stainless Steel/ Nickel Plated Brass/ *Anodized Alumi num PBT LED 6V/ 12V/ 24V/ 36V/ 110V/ 220V Approx, 40,000 hours Current-limiting Operating Voltage(U) 6V 12V 24V 36V Formula Resistance 210Ω, 1/4W 510Ω, 1/2W 1.2kΩ, 3/4W 2.2kΩ, 1W U-Ue Configuration Current-limiting R= Table Resistance(R) 160Ω, 1/4W 460Ω, 1/2W 1.2kΩ, 3/4W 2.2kΩ, 1W le (15.4) (16.6) (22.6) Illuminated Options (2.0) M19x1.00 (.748DIAx1.00) (11.5) (0.5) (2.8) Bottom View Dot Ring (10.5) (9.0) (12.0) 20

23 Buzzer & Flicker buzzer Φ 19mm Sealed IP40 Buzzer/ Flicker Buzzer Variety Of s Illuminated And Non-Illuminated Illumination Led- Illumination Function Style Voltage Series Options Options Options Options Options Options Lf19 NONE- Buzzer flashing and non-illum. NO NE- Screw NONE- Stainless steel NONE- Ring illum. W- White 12V F- Flicker buzzer Y- Yellow 24V A- Alternately flashing color B- Blue C- LED close when buzzer pause H- LED always lighting when buzzer pause S- Bi-color LED strobe, the buzzer call in slow The function can be customized Remark: A standard color for Red and Green C standard color for Red S standard color for Red and Blue G- Green R- Red Technical Data Type Lf19 Lf19-F Function Buzzer Flicker Buzzer Screw Max. Switch Rating -- Contact Resistance -- Insulation Resistance -- Dielectric Strength 2000VAC Operation Temp -20 ~ Contact ~14Nm Operation Pressure Actuator Base Buzzer Spec. Type -- IP50, IK04 -- Stainless Stainless Steel PA Buzzer Flicker Buzzer Voltage DC12V/ DC24V -- Sound Inten 80dB(0.1m) Yueqing Langir Electric Co., Ltd. Catalogue 21

24 Anti vandal switch Φ 22mm Anti-Vandal IK09/ Sealed IP65 Illuminated and Non-Illuminated Flat/ Concave Momentary/ Latching Variety of s Momentary: When you push Switch and then move your finger, the actuator will back to the original position; Latching: When you push Switch once it will change state and stay in this pushed-down position and will not come back to oniginal position unless you push it again. Illumination Led- Illumination Actuator Function Style Voltage Marking Series Options Options Options Options Options Options Options Options Operation Description L22 F- Flat NO NE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V lug (2.8x0.5) 1-1NO1NC A- Anodized aluminum* R- Ring illum. Y- Yellow 12V Custom Markings available Z- Latching NONE- non-illum. B- Blue 24V 1-1NO1NC G- Green 36V NOTES: R- Red 110V * Anodized aluminum: Variety of colors(moq 500pcs/color), standard for black anodized O- Orange 220V Technical Data Type L22-F L22-F/R L22-F/D Illuminated Options Non-llluminated Ring Dot Pin (2.8X0.5) Max. Switch Rating Ith: 5A Ui: 250VAC Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 Contact 1,000,000 Cycles >50,000 Cycles 5~14Nm Operation Pressure approx. 8N IP65/ IK10 Actuator Stainless Steel/ *Anodized Aluminum Stainless Steel/ *Anodized Aluminum PA Base Type Voltage Life LED 6V/ 12V/ 24V/ 36V/ 110V/ 220V Approx, 40,000 hours 22

25 Anti vandal switch Φ 22mm Anti-Vandal IK09/ Sealed IP65 Illuminated and Non-Illuminated Flat/ Concave Momentary/ Latching Variety of s Momentary: When you push Switch and then move your finger, the actuator will back to the original position; Latching: When you push Switch once it will change state and stay in this pushed-down position and will not come back to oniginal position unless you push it again. Illumination Led- Illumination Actuator Function Style Voltage Marking Series Options Options Options Options Options Options Options Options L22A F- Flat NO NE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V lug (2.8x0.5) 1-1NO1NC A- Anodized aluminum* R- Ring illum. Y- Yellow 12V Custom Markings available N- Screw Z- Latching NONE- non-illum. B- Blue 24V 1-1NO1NC G- Green 36V NOTES: R- Red 110V * Anodized aluminum: Variety of colors(moq 500pcs/color), standard for black anodized O- Orange 220V Technical Data Type L22A-F L22A-F/R L22A-F/D Illuminated Options Non-llluminated Ring Dot Pin (2.8X0.5) Max. Switch Rating Ith: 5A Ui: 250VAC Contact Resistance 50mΩ Insulation Resistance Dielectric Strength 1000mΩ 2000VAC Operation Temp -20 ~+55 1,000,000 Cycles Operation Contact >50,000 Cycles 1 2 5~14Nm 3 4 Operation Pressure approx. 8N IP65/ IK10 Description Actuator Stainless Steel/ *Anodized Aluminum Stainless Steel/ *Anodized Aluminum Base PA Type LED Voltage 6V/ 12V/ 24V/ 36V/ 110V/ 220V Screw Pin Switch terminals1, 2 for NC and 3, 4 for NO LED terminals marked + and - Life Approx, 40,000 hours Yueqing Langir Electric Co., Ltd. Catalogue 23

26 Anti vandal switch Φ 22mm (30.6) (24.6) L (38.7) L (32.7) (2.8) (7.6) (0.5) (7.6) (7.7) (9.9) (17.0) (30.6) (24.6) MOMENTARY L (42.0) L (36.0) (2.0) (2.0) (2.8) (7.6) (0.5) (7.6) (7.7) (9.9) (17.0) LATCHING 24

27 Big current anti vandal switch Φ 22mm Big range current: 3A 5A 8A 10A (15A)16A 20A(21A) Snap action, compact design, suit for small space Variety Of s Anti-Vandal IK09/ Sealed IP65 Illuminated and Non-Illuminated Illumination Led- Illumination Actuator Function Current Style Voltage Marking Series Options Options Options Options Options Options Options Options Options L22B F- Flat NONE- quick M- Momentary A S- Stainless steel D- Dot illum. W- White 6V connect terminal 1 1NO (SPST) 03-3A R- Ring illum. Y- Yellow 12V Custom Markings available (6.35X0.8) 2 1NC (SPST) 05-5A NONE- non-illum. B- Blue 24V 3 1NO1NC (SPDT) 08-8A G- Green 36V Z- Latching 10-10A R- Red 110V 1 1NO (SPST) 16-16A O- Orange 220V 2 1NC (SPST) 21-21A D6-0.6A/ 125VDC 3 1NO1NC (SPDT) D3-0.3A/ 250VDC 250VAC/125VAC Operation Technical Data Type L22B-F L22B-F/R L22B-F/D 1 2 NC Illuminated Options Non-Illuminated Ring Dot 3 NO PIN (6.35x0.8) C C Max. Switch Rating 3A 5A 8A 10A 15A(16A) 20A(21A)/ 250VAC, 125VAC 0.6A/ 125VDC 0.3A/ 250VDC Contact Resistance 25m Insulation Resistance 100m Dielectric Strength Between non-consecutive terminals 1,000Vrms, 50/60Hz for 1min Between non-current carrying metal parts and each terminal 1,500Vrms, 50/60Hz for 1min Between ground and each terminal 1,500Vrms, 50/60Hz for 1min Shock resistance Detruction: O.F.>0.5N: 1000m/s2 (approx. 100g), O.F. 0.5N: 400m/s2 (approx. 40g) Malfunction: O.F.>0.5N: 200m/s2 (approx. 20g), O.F. 0.5N: 100m/s2 (approx. 10g) Vibration Resistance 10-50Hz, 1.5mm Double Amplitude Ambient Temp. -25 ~+85 Contact Operation Pressure 2,000,000cycles 50,000cycles 5~14Nm 10N IP65/ IK09 Illuminated Actuator Stainless Steel Stainless Steel Type LED Voltage 6V/ 12V/ 24V/ 36V/ 110V/ 220V R G Y O B W Life Approx. 40, 000hours Yueqing Langir Electric Co., Ltd. Catalogue 25

28 Big current anti vandal switch Φ 22mm 端子种类 types 快接端子 #250(t=0.8) Quick-connect terminal #187 端子尺寸 Dimenesions 下公共端 Bottom common terminal Contact type 公共端类型 Common terminal types 转换式 SPDT 常闭式 SPST-NC 常开式 SPST-NO 公共端在底部 Bottom common terminal M22X M22X MOMENTARY LATCHING 26

29 Micro-trip anti vandal switch Φ 22mm Anti-Vandal IK09/ Sealed IP65 Illuminated And Non-Illuminated Momentary Variety of s Illumination Led- Illumination Actuator Function Style Voltage Marking Series Options Options Options Options Options Options Options Options Operation Description Technical Data L22M Micro-trip F- Flat NO NE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V lug (2.8x0.5) 1-1NO A- Anodized aluminum* R- Ring illum. Y- Yellow 12V Custom Markings available N- Screw NONE- non-illum. B- Blue 24V G- Green 36V NOTES: R- Red 110V * Anodized aluminum: Variety of colors(moq 500pcs/color), standard for black anodized O- Orange 220V LED terminals marked+and - Switch terminals unmarked. Type L22M-F L22M-F/R L22M-F/D Illuminated Options Non-Illuminated Ring Dot Screw and Pin (2.8X0.8) Max. Switch Rating 50mA 24VDC Contact Resistance 100mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 1,000,000 Cycles 50,000 Cycles 0.57Nm approx. 8N IP65/ IK09 Contact Rear Nut Fixing Operation Pressure Switch Assembly Tags s Switch & Button Lens and Lens Internal Seal O Ring Type Voltage Life UL94V-0 Rated Polyamide (Nylon) Copper Alloy Copper Alloy Stainless Steel/ *Anodized Aluminum Polycarbonate Silicone Nitrile LED 6V/ 12V/ 24V/ 36V/ 110V/ 220V Approx, 40,000 hours (25.0) L (32.7) (2.0) L (31.0) Dot (9.0) Ring (14.0) (M22X1.0) Yueqing Langir Electric Co., Ltd. Catalogue 27

30 Anti vandal switch Φ 25mm Anti-Vandal IK09/ Sealed IP65 Illuminated and Non-Illuminated Flat/ Concave Momentary/ Latching Variety of s Momentary: When you push Switch and then move your finger, the actuator will back to the original position; Latching: When you push Switch once it will change state and stay in this pushed-down position and will not come back to oniginal position unless you push it again. Illumination Led- Illumination Actuator Function Style Voltage Marking Series Options Options Options Options Options Options Options Options Operation Description L25 F- Flat NO NE- Solder- M- Momentary S- Stainless steel D- Dot illum. W- White 6V lug (2.8x0.5) 1-1NO1NC A- Anodized aluminum* R- Ring illum. Y- Yellow 12V Custom Markings available 2-2NO2NC NONE- non-illum. B- Blue 24V Z- Latching G- Green 36V 1-1NO1NC R- Red 110V NOTES: 2-2NO2NC O- Orange 220V * Anodized aluminum: Variety of colors(moq 500pcs/color), standard for black anodized Technical Data Type L25-F L25-F/R L25-F/D Illuminated Options Non-Illuminated Ring Dot Pin (2.8X0.5) Max. Switch Rating Ith: 5A Ui: 250VAC Contact Resistance 50mΩ Insulation Resistance 1000mΩ Dielectric Strength 2000VAC Operation Temp -20 ~+55 Contact 1,000,000 Cycles >50,000 Cycles 5~14Nm Operation Pressure approx. 8N IK10 Actuator Stainless Steel/ *Anodized Aluminum Base Type Voltage Stainless Steel/ *Anodized Aluminum PA LED 6V/ 12V/ 24V/ 36V/ 110V/ 220V Life Approx, 40,000 hours 28

31 Copyright Langir Electric All Right Reserved. Disclaimer: The appearance of the products listed on this catalogue, color, parameters are for reference only, issued a kind of Langir Electric Company shall prevail. Langir Electric Company reserves the right to modify or cancel the relevant parameters of this catalogue does not advance notice. If in doubt, please contact your sales representative. YUEQING LANGIR ELECTRIC CO., LTD. ADD: 4F, NO. 188 LIUQING NORTH RD, LIUSHI, YUEQING, ZHEJIANG, CHINA FAX: 86 (577) TEL: 86 (577) MAIL: langir@langir.com

RoHS. Specifications. Part Number Configurator

RoHS. Specifications. Part Number Configurator Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 48VDC Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance:

More information

Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.

Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red. Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:

More information

Capacitive Switches

Capacitive Switches Capacitive Switches www.capacitive-switch.com langir About Capacitive Switches The new CP series technology senses the touch of a finger and creates an electrical charge to activate the switches An auto-calibration

More information

Capacitive Switches

Capacitive Switches Capacitive Switches www.capacitive-switch.com About Capacitive Switches The new CP series technology senses the touch of a finger and creates an electrical charge to activate the switches An auto-calibration

More information

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871 Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER

Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms

More information

CIT SWITCHTM ANT SPECIFICATIONS

CIT SWITCHTM ANT SPECIFICATIONS Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

Selection guide - Section B1 «I» range

Selection guide - Section B1 «I» range Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1

More information

C&K DA Series Miniature Single Pole Rocker Switches

C&K DA Series Miniature Single Pole Rocker Switches Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and

More information

AV SERIES PUSHBUTTON SWITCHES Distinctive features

AV SERIES PUSHBUTTON SWITCHES Distinctive features PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing

More information

Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)

Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC) SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.

More information

AV series Anti-vandal and security pushbutton switches

AV series Anti-vandal and security pushbutton switches Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism

More information

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS

More information

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded

More information

Switches. Introduction

Switches. Introduction Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile

More information

Type Contact form Enclosure ratings Model Standard SPST-NO (Class A) Flux protection G5LA-1A Sealed

Type Contact form Enclosure ratings Model Standard SPST-NO (Class A) Flux protection G5LA-1A Sealed PCB Relay G5LA A Cubic, Single-pole 1A Power Relay Economical cube relay with universal terminal footprint Conforms to VDE435, CQC UL recognized/ CSA certified. High switching power: 1A @ 5VAC Withstands

More information

SWITCHES. Other switch types include conventional, push-button and toggle switches.

SWITCHES. Other switch types include conventional, push-button and toggle switches. Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile

More information

Miniature Stainless Steel Vandal Resistant

Miniature Stainless Steel Vandal Resistant Miniature Vandal Resistant Prominent Button / Flush Profile Prominent and Flush Profile 2A, 36 dc (Front of Panel Only) Specification /3 /1 Operating Temp Range: 0.6Nm 0.6Nm PA Copper, Gold Plated PA Copper,

More information

Switches. Introduction

Switches. Introduction Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile

More information

IP series Latching action pushbutton switches for harsh environments

IP series Latching action pushbutton switches for harsh environments Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact

More information

ø8 A8 Series Miniature Control Units

ø8 A8 Series Miniature Control Units A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals

More information

ANT. Materials. Features. Miniature Toggle

ANT. Materials. Features. Miniature Toggle Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical

More information

MICRO SWITCH ESS SERIES

MICRO SWITCH ESS SERIES MICRO SWITCH ESS SERIES FEATURES Small compact size suitable for electric equipment appliances and P.C.B. layout 2-piece spring mechanism design offering durable acute operation and long life Heavy/Light

More information

Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter

Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless

More information

Sealed pushbutton switches - bushing Ø 16 mm - momentary

Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches

Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available

More information

8500 Series Subminiature Pushbutton Switches

8500 Series Subminiature Pushbutton Switches Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking

More information

Non-illuminated Push Buttons

Non-illuminated Push Buttons Non-illuminated Push Buttons 3 Accessories for push buttons Lockout attachment Contact block kits Lens kits Wobblestick kit Push Button Cap Interchangeable, snap-in design Protective caps 9 colors: red,

More information

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS SW-IPLATCH-802 DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67

More information

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons

More information

ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67

ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67 PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices

More information

Miniature Switches & Pilot Devices

Miniature Switches & Pilot Devices A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and

More information

ELECTRICAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for

More information

We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories

We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated

More information

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS

More information

Momentary pushbutton switches - round plunger

Momentary pushbutton switches - round plunger 1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.

More information

PCB Relay. Ordering Information. Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications G8P - - VDC

PCB Relay. Ordering Information. Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications G8P - - VDC PCB Relay Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications Compact, yet capable of switching up to 30-A loads. Complies with UL873 and UL508 column A spacings (1/8 through

More information

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.

More information

APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator

APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,

More information

1000 Series Miniature Slide Switches

1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special

More information

Ordering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays

Ordering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays Low-profile Relay with Various Models Low profile:.7 mm in height Clearance and creepage distance Between coil and contacts: 8 mm/8 mm Between contacts of the same polarity: 3 mm/4 mm Models with AC coil

More information

Farbe LED Color LED. Anschlusstyp Terminal Type. J: Lötanschluss ohne Buchstaben: Schraubklemmenanschluss

Farbe LED Color LED. Anschlusstyp Terminal Type. J: Lötanschluss ohne Buchstaben: Schraubklemmenanschluss Order-Code: DIOH-GQ - / / / Δ / / / Δ Ø Einbaudurchmesser Mounting Hole 8mm 12mm 16mm 19mm 22mm Tastenform Front Shape F: Flach rund H: Erhöht rund C: Konkav B: Gewölbt F: Flat round H: High round C: Concave

More information

E Series Sealed Miniature Toggle Switches

E Series Sealed Miniature Toggle Switches Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available

More information

T Series Subminiature Toggle Switches

T Series Subminiature Toggle Switches eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation

More information

C&K 1000 Series Miniature Slide Switches

C&K 1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

DM Series Miniature 2 Pole Power Rocker Switches

DM Series Miniature 2 Pole Power Rocker Switches Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications

More information

SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors

SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS

More information

Lighted PushButton Switch

Lighted PushButton Switch Lighted PushButton Switch Cylindrical 8mm dia. Subminiature Series Featuring Short Mounting Depth Round, square and rectangular LED pushbutton units. types also available. Requires only 18mm mounting depth.

More information

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at

More information

Common features. Installation options. Aesthetic options

Common features. Installation options. Aesthetic options New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series

More information

Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range

Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches

More information

Farbe LED Color LED. Anschlusstyp Terminal Type. J: Lötanschluss ohne Buchstaben: Schraubklemmenanschluss

Farbe LED Color LED. Anschlusstyp Terminal Type. J: Lötanschluss ohne Buchstaben: Schraubklemmenanschluss Order-Code: DIOH-GQ - / / / Δ / / / Δ Ø Einbaudurchmesser Mounting Hole 8mm 12mm 16mm 19mm 22mm Tastenform Front Shape F: Flach rund H: Erhöht rund C: Konkav B: Gewölbt F: Flat round H: High round C: Concave

More information

Single-pole 10A35VDC 0.8mm Contact Gap Power Relay : G5LE-G Single-pole 16A250VAC Power Relay : G5LE-E. Contact Form 10A 35VDC

Single-pole 10A35VDC 0.8mm Contact Gap Power Relay : G5LE-G Single-pole 16A250VAC Power Relay : G5LE-E. Contact Form 10A 35VDC PCB Relay R G5LE-E/-G Single-pole 0A35VDC 0.8mm Contact Gap Power Relay : Single-pole 6A250VAC Power Relay : G5LE-E Sub-miniature 'sugar cube ' relay with universal terminal footprint. UL class-f coil

More information

ø10 A1 Series Miniature Control Units

ø10 A1 Series Miniature Control Units A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals

More information

A01 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.630" (16mm)

A01 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.630 (16mm) PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + Switchblock To order, select desired model numbers from tables below. Example:

More information

Ordering Information. Text PCB Power Relay G5LE

Ordering Information. Text PCB Power Relay G5LE A Cubic, Single-pole 10-A Power Relay Single-pole 10A 35VDC, 0.8mm contact gap: G5LE-G Single-pole 16A 250VAC: G5LE-E ROHS compliant. Sub-miniature sugar cube relay with universal terminal footprint. Conforms

More information

DPDT BTA12-2C-S-C BTA12-2C-S-CL BTA12-2C-S-CLM SPST-NO-DM BTA12-1X-S-C BTA12-1X-S-CL BTA12-1X-S-CLM

DPDT BTA12-2C-S-C BTA12-2C-S-CL BTA12-2C-S-CLM SPST-NO-DM BTA12-1X-S-C BTA12-1X-S-CL BTA12-1X-S-CLM FEATURES Plug-in relay Quick connect receptacles or direct soldering. PCB terminals are also acceptable. Large capacity 30A contact rating. Optional blowout magnet: high dc switching. Wide spacing between

More information

Miniature microswitches - Positive break

Miniature microswitches - Positive break 1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very

More information

Bright illumination face and snap-action switching.

Bright illumination face and snap-action switching. ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree

More information

Switches. Introduction

Switches. Introduction Introduction Switches Manufactured from Stainless Steel, ulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially

More information

High-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.

High-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g. Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available

More information

B3F. Miniature, Space-saving Switch

B3F. Miniature, Space-saving Switch B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright

More information

ET Series Sealed Subminiature Rocker Switches

ET Series Sealed Subminiature Rocker Switches ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation

More information

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS. Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and

More information

ET Series Sealed Subminiature Rocker Switches

ET Series Sealed Subminiature Rocker Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers

More information

9000 Series Power Rocker and Lever Handle Switches

9000 Series Power Rocker and Lever Handle Switches Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off

More information

Subminiature Basic Switch

Subminiature Basic Switch Subminiature Basic Switch Subminiature Basic Switch Offers Long Life and High Reliability A design that combines simplicity and stability by the use of two split springs ensures a long durability of 30,000,000

More information

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models. Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold

More information

ET Series Sealed Subminiature Rocker Switches

ET Series Sealed Subminiature Rocker Switches Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications

More information

Safety switches for hinged doors

Safety switches for hinged doors 4C Safety switches for hinged doors Selection diagram CONTACT BLOCKS 18 7 9 20 overlapped 1NO+ FD FL FC 21 22 33 34 2NO+1NC 3NC CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled

More information

22mm Push Buttons and Switches

22mm Push Buttons and Switches PUSH UTTONS/SWITCHES 22mm Push uttons and Switches Emergency Stops Selector Switches Lever Type Small Head 71.4 2 positions Large Head 3 positions unit: mm S2ER E3 R A D Size CONTACT LOCK * S2SR S 3 R

More information

FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching

FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching Fully illuminated pushbutton switches bushing Ø 30 mm momentary or latching Distinctive features and specifications Full actuator or symbol illumination UG1410AR3 Snapin and threaded bushing models Large

More information

PRODUCT MATRIX SELECTION. SERVICE. SPEED.

PRODUCT MATRIX SELECTION. SERVICE. SPEED. SELECTION. SERVICE. SPEED. PRODUCT MATRIX Table of Contents DO YOU NEED A SWITCH? Questions To Ask When Specifying A Switch...3-5 PRODUCT MATRIX Anti-vandal Switch Series Comparison...6-9 Pushbutton Switch

More information

ET Series Sealed Subminiature Toggle Switches

ET Series Sealed Subminiature Toggle Switches Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB

More information

onlinecomponents.com

onlinecomponents.com eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications

More information

D2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend

D2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive

More information

HL (AZH) LIMIT SWITCHES

HL (AZH) LIMIT SWITCHES COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount

More information

PCB Relay. Ordering Information. Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications G8P - - VDC

PCB Relay. Ordering Information. Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications G8P - - VDC PCB Relay Compact, Low-cost 30-A Power Relay for PC Board or Panel-mounted Applications Compact, yet capable of switching up to 30-A loads. Complies with UL873 and UL508 column A spacings (1/8 through

More information

A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)

A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866 (22mm) or 1.161 x.846 (29.5mm x 21.5mm) PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two

More information

18mm bezel diameter 16mm panel hole S.P. Push to make Polished finish 2A, 48V d.c.

18mm bezel diameter 16mm panel hole S.P. Push to make Polished finish 2A, 48V d.c. Stainless Steel Momentary FLUSH PROFILE MP0042/1 DOMED PROFILE MP0042/2 MP0042/3 Specification MP0042/1 MP0042/2 MP0042/3 Terminations: Screw Terminals Screw Terminals Screw Terminals Switching: S.P. Push

More information

Lighted Pushbutton Switch

Lighted Pushbutton Switch Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant

More information

INDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches.

INDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches. INDUSTRIAL CONTROLS E A01 SERIES Panel cut-out.630" (16mm) Description Products & features Specifications Illuminated or non-illuminated pushbutton switches Indicators Rotary lever switches eylock switches

More information

Power rocker switches with protection guard

Power rocker switches with protection guard Distinctive features and specifications Protected against accidental actuation SWKH709 Wide choice of colors Laser etched or pad printed symbols Illuminated or nonilluminated Sealed to IP9K ELECTRICAL

More information

C&K E Series Sealed Miniature Toggle Switches

C&K E Series Sealed Miniature Toggle Switches Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications

More information

E Series Sealed Miniature Rocker and Lever Handle Switches

E Series Sealed Miniature Rocker and Lever Handle Switches Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical

More information

Miniaturized limit switches

Miniaturized limit switches Miniaturized limit switches Selection diagram Actuators 04 0 06 Thermoplastic Bodies M3 Contact blocks NONC 1NO+1NC snap action Cable entry With screw 290 GENERAL CATALOGUE miniaturized limit switches

More information

Emergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm

Emergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm Emergency Stop Switch Mounting Aperture of 16 mm Modular construction, easy installation Positive opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-5-1, Conforms to EN418

More information

Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER

Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500

More information

7000 Series Miniature Toggle Switches

7000 Series Miniature Toggle Switches Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against

More information

General Specifications

General Specifications General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the

More information

Microswitches M series

Microswitches M series Microswitches M series Technical data Housing Made of glass-reinforced polymer, self-extinguishing, shock-proof thermoplastic resin. Protection degree: IP40 (with protection art. VF C0) IP0 (with protection

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,

More information

K12 High Performance Key Switches

K12 High Performance Key Switches Features/Benefits Excellent tactile feel Wide choice of LE colors, travel and actuator forces High reliability / long life Sealed version available esigned for low-level switching ouble stroke version

More information