SEALED POWER TRANFORMERS BV SERIES EI30 0.6VA 2.8VA FEATURES OUTLINE DIMENSIONS
|
|
|
- Gabriel Moody
- 5 years ago
- Views:
Transcription
1 ZETTLER Magnetics, Inc. COLUMBIA ALISO VIEJO, CA FAX WEB SITE: FEATURES UL & VDE CERTIFICATION SMALL PHYSICAL FOOTPRINT ENVIRONMENTALLY PROTECTED COST EFFECTIVE DESIGN OPTION INPUT V OR 230V / SINGLE AND DUAL OUTPUT SPLIT BOBBIN DESIGN ISOLATED PRIMARY AND SECONDARY WINDINGS SELF-EXTINGUISHING PLASTICS UL4V-0 DIELECTRIC STRENGTH 4200Vrms INHERENTLY ENERGY LIMITED RESIN CLASS B IEC 8, VACUUM SEALED CONFORMS TO EN 68 AND EN % PRODUCTION TESTED SEALED POWER TRANFORMERS BV SERIES EI30 0.6VA 2.8VA OUTLINE DIMENSIONS MECHANICAL DATA: WIRING DIAGRAM: SCHEMATIC DIAGRAM: Dual outputs 6 0 Dual outputs Output ±0.0 Ø0,8 TYP. 0,0±0.2,0±0.20,0±0.2 0,0± Single output Single output Output 32.8 Dual outputs 32.8 Single output
2 ELECTRICAL SPECIFICATIONS EI30- SERIES0.6 VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S06006 BV302S ±% MAX BV30S0006 BV302S0006 ±% MAX BV30S2006 BV302S2006 2±% MAX BV30S006 BV302S006 ±% MAX BV30S8006 BV302S8006 8±% MAX BV30S24006 BV302S ±% MAX BV30D06006 BV302D ±% 6±% MAX BV30D0006 BV302D0006 ±% ±% MAX BV30D2006 BV302D2006 2±% 2±% MAX BV30D006 BV302D006 ±% ±% MAX BV30D8006 BV302D8006 8±% 8±% MAX BV30D24006 BV302D ±% 24±% MAX EI30-0. SERIES.0 VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S0600 BV302S0600 6±0% MAX BV30S000 BV302S000 ±0% MAX BV30S200 BV302S200 2±0% MAX BV30S00 BV302S00 ±0% MAX BV30S800 BV302S800 8±0% MAX BV30S2400 BV302S ±0% MAX BV30D0600 BV302D0600 6±0% 6±% MAX BV30D000 BV302D000 ±0% ±% MAX BV30D200 BV302D200 2±0% 2±% MAX BV30D00 BV302D00 ±0% ±% MAX BV30D800 BV302D800 8±0% 8±% MAX BV30D2400 BV302D ±0% 24±% MAX 2
3 EI30-0. SERIES.2 VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S0602 BV302S0602 6±0% MAX BV30S002 BV302S002 ±0% MAX BV30S202 BV302S202 2±0% MAX BV30S02 BV302S02 ±0% MAX BV30S802 BV302S802 8±0% MAX BV30S2402 BV302S ±0% MAX BV30D0602 BV302D0602 6±0% 6±% MAX BV30D002 BV302D002 ±0% ±% MAX BV30D202 BV302D202 2±0% 2±% MAX BV30D02 BV302D02 ±0% ±% MAX BV30D802 BV302D802 8±0% 8±% MAX BV30D2402 BV302D ±0% 24±% MAX EI30-0. SERIES. VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S060 BV302S060 6±0% MAX BV30S00 BV302S00 ±0% MAX BV30S20 BV302S20 2±0% MAX BV30S0 BV302S0 ±0% MAX BV30S80 BV302S80 8±0% MAX BV30S240 BV302S240 24±0% MAX BV30D060 BV302D060 6±0% 6±% MAX BV30D00 BV302D00 ±0% ±% MAX BV30D20 BV302D20 2±0% 2±% MAX BV30D0 BV302D0 ±0% ±% MAX BV30D80 BV302D80 8±0% 8±% MAX BV30D240 BV302D240 24±0% 24±% MAX 3
4 EI30-2. SERIES. VA Power Dimension (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S060 BV302S060 6±0% MAX BV30S00 BV302S00 ±0% MAX BV30S20 BV302S20 2±0% MAX BV30S0 BV302S0 ±0% MAX BV30S80 BV302S80 8±0% MAX BV30S240 BV302S240 24±0% MAX BV30D060 BV302D060 6±0% 6±% MAX BV30D00 BV302D00 ±0% ±% MAX BV30D20 BV302D20 2±0% 2±% MAX BV30D0 BV302D0 ±0% ±% MAX BV30D80 BV302D80 8±0% 8±% MAX BV30D240 BV302D240 24±0% 24±% MAX EI30-2. SERIES.8 VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S0608 BV302S0608 6±0% MAX BV30S008 BV302S008 ±0% MAX BV30S208 BV302S208 2±0% MAX BV30S08 BV302S08 ±0% MAX BV30S808 BV302S808 8±0% MAX BV30S2408 BV302S ±0% MAX BV30D0608 BV302D0608 6±0% 6±% MAX BV30D008 BV302D008 ±0% ±% MAX BV30D208 BV302D208 2±0% 2±% MAX BV30D08 BV302D08 ±0% ±% MAX BV30D808 BV302D808 8±0% 8±% MAX BV30D2408 BV302D ±0% 24±% MAX EI30-. SERIES 2.0 VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S06020 BV302S ±0% MAX BV30S0020 BV302S0020 ±0% MAX BV30S2020 BV302S2020 2±0% MAX BV30S020 BV302S020 ±0% MAX 4
5 BV30S8020 BV302S8020 8±0% MAX BV30S24020 BV302S ±0% MAX BV30D06020 BV302D ±0% 6±% MAX BV30D0020 BV302D0020 ±0% ±% MAX BV30D2020 BV302D2020 2±0% 2±% MAX BV30D020 BV302D020 ±0% ±% MAX BV30D8020 BV302D8020 8±0% 8±% MAX BV30D24020 BV302D ±0% 24±% MAX EI SERIES 2.3 VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S06023 BV302S ±0% MAX BV30S0023 BV302S0023 ±0% MAX BV30S2023 BV302S2023 2±0% MAX BV30S023 BV302S023 ±0% MAX BV30S8023 BV302S8023 8±0% MAX BV30S24023 BV302S ±0% MAX BV30D06023 BV302D ±0% 6±% MAX BV30D0023 BV302D0023 ±0% ±% MAX BV30D2023 BV302D2023 2±0% 2±% MAX BV30D023 BV302D023 ±0% ±% MAX BV30D8023 BV302D8023 8±0% 8±% MAX BV30D24023 BV302D ±0% 24±% MAX EI SERIES 2.4 VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S06024 BV302S ±0% MAX BV30S0024 BV302S0024 ±0% MAX BV30S2024 BV302S2024 2±0% MAX BV30S024 BV302S024 ±0% MAX BV30S8024 BV302S8024 8±0% MAX BV30S24024 BV302S ±0% MAX BV30D06024 BV302D ±0% 6±% MAX BV30D0024 BV302D0024 ±0% ±% MAX BV30D2024 BV302D2024 2±0% 2±% MAX BV30D024 BV302D024 ±0% ±% MAX BV30D8024 BV302D8024 8±0% 8±% MAX
6 BV30D24024 BV302D ±0% 24±% MAX EI SERIES 2. VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S0602 BV302S0602 6±0% MAX BV30S002 BV302S002 ±0% MAX BV30S202 BV302S202 2±0% MAX BV30S02 BV302S02 ±0% MAX BV30S802 BV302S802 8±0% MAX BV30S2402 BV302S ±0% MAX BV30D0602 BV302D0602 6±0% 6±% X MAX BV30D002 BV302D002 ±0% ±% 2 0 2X MAX BV30D202 BV302D202 2±0% 2±% 2 3 2X MAX BV30D02 BV302D02 ±0% ±% 2 0 2X MAX BV30D802 BV302D802 8±0% 8±% 2 2X MAX BV30D2402 BV302D ±0% 24±% 2 6 2X MAX EI SERIES 2.8 VA (:V) (:230V) Voltage current Voltage (VA) H(mm) BV30S2028 BV302S2028 2±0% MAX BV30S028 BV302S028 ±0% MAX BV30S8028 BV302S8028 8±0% MAX BV30S24028 BV302S ±0% MAX BV30D06028 BV302D ±0% 6±% X MAX BV30D0028 BV302D0028 ±0% ±% 2 3 2X MAX BV30D2028 BV302D2028 2±0% 2±% X MAX BV30D028 BV302D028 ±0% ±% 2 8 2X MAX BV30D8028 BV302D8028 8±0% 8±% 2 6 2X MAX BV30D24028 BV302D ±0% 24±% 2 2X MAX ZETTLER Magnetics, Inc. COLUMBIA ALISO VIEJO, CA FAX WEB SITE: SALES@ZETTLERMAGNETICS.COM Rev. 02/2/2008 6
MBS AG. CTB Plug-in current transformer MBS AG. Dimensions: General technical specifications:
CTB 31.35 Plug-in current transformer Dimensions: Primary conductor 1: 30x10 mm Primary conductor 2: 25x12 mm Primary conductor 3: 20x20 mm Round conductor: 26 mm Transformer width: 60 mm Transformer height:
PRECISION MOTION CONTROL
PRECISION MOTION CONTROL P535 - series s The P535 series provides a combination of optimum size and price for use in instrumentation applications that require digital control of position and speed. Features
NXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
NXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
Solenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
Product Overview. Transformers & Reactors. Proficient. Innovative. Customer-orientated. Transformers up to 8MVA AC/DC Reactors up to 3000A
Proficient. Innovative. Customer-orientated Transformers up to 8MVA AC/DC Reactors up to 3000A Power Transformers Cast Resin Transformers High-Current Transformers AC/DC Reactors Variable Transformers
NXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
P and P Receptacle PCB Hole Patterns
Series 79 790-028P and 790-043P 790-028P and 790-043P This section contains printed circuit board footprints for vertical mounted Series 79 receptacles. The contact identification numbers are shown for
Page 1
www.hahn-trafo.com Page Page www.hahn-trafo.com Content HAHN - General information Choke series Flyback/ SMPS-Converter series ErP-Eco Design solution BV 0 Series EI 30 Series EI Series UI Series RAST
MEDIUM VOLTAGE PRODUCT. TJC 4 Indoor voltage transformers
MEDIUM VOLTAGE PRODUCT TJC 4 Indoor voltage transformers 2 TJC 4 INDOOR VOLTAGE TRANSFORMERS Parameters Highest voltage for equipment Power frequency test voltage, 1 min. Lightning impulse test voltage
FOSHAN SHUNDE HEXIN ELECTRON CO.,LTD
FOSHAN SHUNDE HEXIN ELECTRON CO.,LTD Metallized Polypropylene Film Capcitor Model Operating temperature Range Rated voltage Application Confirmity certification CBB65-40 ~+105 4μF~120μF 110~600VAC Home
Solenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
Prewired position switches FF series
2 Prewired position switches FF series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45 46
C B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
4 Remote I/O. Enclosures for Fieldstations Series 8126 (Customer-Specific)
4 Remote I/O Series 86 078E00 Series 86 enclosures of glass-fibre reinforced polyester resin or of high grade steel are used in larger control stations and control station combinations. Special sizes are
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
INSTALLATION RULES for SCS/SENSOR Pt100
INSTALLATION RULES for SCS/SENSOR Pt100 1MN0118 REV. 0 operates with ISO9001 certified quality system TECSYSTEM S.r.l. 20094 Corsico (MI) Tel.: +39-024581861 Fax: +39-0248600783 http://www.tecsystem.it
HOW TO ORDER SPECIFY AS SHOWN BELOW EXAMPLE #1
MERCURY TO METAL CONTACTORS AND RELAYS GLASS SEAL GUIDE RETAINER TEFLON GUIDE MAGNETIC SLEEVE BOBBIN TERMINAL WELD RING CERAMIC INSULATOR ELECTRODE METAL CAP DESCRIPTION MERCURY TO METAL CONTACTOR: The
Magnetic Products. Inductors Pulse Transformers Current Sensing Transformers Databus Isolators Common-Mode Chokes.
Magnetic Products Inductors Pulse Transformers Sensing Transformers Databus Isolators Common-Mode Chokes Magnetic Products Two essential elements of the vast majority of power electronics applications
Prewired position switches FF series
2 Prewired position switches FF series Distributed buy Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable
Isolating transformer DS0107. Three-phase isolating transformers for the supply of three-phase loads in medical locations
Three-phase isolating transformers for the supply of three-phase loads in medical locations DS0107_D00105_00_D_XXEN/05.2015 Three-phase isolating transformers for the supply of three-phase loads in medical
Page 1
www.hahn-trafo.com Page Page www.hahn-trafo.com Content HAHN - General information Choke series Flyback/ SMPS-Converter series ErP-Eco Design solution BV 0 Series EI 30 Series EI Series UI Series RAST
ICT TRANSFORMERS. Industrial Control Transformers provide a low and safe control voltage for the operation of many electromagnetic devices
ICT TRANSFORMERS Industrial Control Transformers provide a low and safe control voltage for the operation of many electromagnetic devices TA SERIES INDUSTRIAL CONTROL TRANSFORMER Industrial control transformers
KEMET Part Number: C276CC35250AA1J
KEMET Part Number: C276CC35250AA1J Film, Film/Foil Polypropylene, Motor Run, C276, 25 uf, 5%, 470 V D Threaded Mounting Stud M8 x 10 Double Fast-On L 2 13.5±0.5 5.5 6.3 x 0.8 13.4±0.5 10±0.5 General Information
NEW ENERGY SOLUTIONS SOLAR RELAYS
NEW ENERGY SOLUTIONS SOLAR RELAYS p a g e 2 TABLE OF CONTENTS Page 1. Introduction 3 2. Solar Relays Overview - The ZETTLER Advantage 3 3. ZETTLER AC circuit Solar Relays for Inverters 7 3.1 < 30 A 7 3.2
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
Disc Type Capacitors with Lead (High Voltage Ceramic Capacitors) Product Guide
Disc Type Capacitors with Lead (High Voltage Ceramic Capacitors) Product Guide Series Categories Characteristic Page CK45 CC45 CK45-RR CD CS CK45-RR CS Commercial Grade Commercial Grade / Low Dissipation
Isolating transformer ES710
Single-phase isolating transformers for the design of medical IT systems Also available as energy-efficient Green Line (GL) edition ES710_D00109_03_D_XXEN/10.2016 Single-phase isolating transformers for
Capanivo Series CN 4000
Capanivo Series CN 4000 Instruction manual 010516 1 UWT GmbH Westendstraße 5 Tel.: +49 (0)831 57123-0 Internet:www.uwt.de D-87488 Betzigau Fax: +49 (0)831 76879 E-Mail: info@uwt.de Scope of this instruction
SafeGear TM Motor Control Center Arc resistant metal-clad construction Motor Control Center Descriptive bulletin
SafeGear TM Motor Control Center Arc resistant metal-clad construction Motor Control Center Descriptive bulletin Contents 1. Introduction 2 2. Product highlights 2 3. Available configuration/competitive
EVI 5 S13 Solenoid System
EVI 5 S13 Solenoid System The EVI5 S13 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 13
SELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
200 SERIES THREADED VALVES PENTAIR CLEAN AIR SYSTEMS
THREADED VALVES PENTAIR CLEAN AIR SYSTEMS Lock nut DESCRIPTION The is a range of diaphragm valves suitable for dust collector applications, in particular for reverse pulse-jet filter cleaning of filter
M-SERIES MAGNITUDE LIGHTING MAGNETIC DIMMABLE CLASS 2 LED DRIVER QUICK SPECS ENCLOSURE DETAILS
MAGNITUDE LIGHTING C DIMMABLE DIM DOWN TO 1% CLASS 2 12V DC P/N: M20L12DC-AR Magnitude's M20L12DC-AR is the most compact LED driver on the market with a magnetic transformer core. It is equipped with two
Microswitches MK Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
Capacitive Sensors. Series 80 - PNP
Ø50 Ø30 Ø43,5 M12x1 Capacitive Sensors Series 80 - PNP Housing: Tri-Clamp Housing material: Stainless steel VA Also suitable for food applications Sensing distance 1...40 mm adjustable With flange connector
MTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
NXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
MEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
CPS2000 Cabinet Power System
Input (Nominal): 90 Vac to 264 Vac (Autoranging) Output (Nominal): -48 Vdc (up to 28.8 A) and Optional 50 VA Ringing Generator The low-maintenance, outside-plant CPS2000 (Cabinet Power System) integrates
Solenoid System. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5).
EVI 7 S9 Solenoid System The EVI7 S9 system by AMISCO includes a wide range of solenoids, coils and operators, designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter
Brushless DC Axial Fans
Brushless DC Axial Fans General Specifications Material: Body PBT UL 9V- Fan PBT UL 9V- Insulation Class E Approvals UL, cul Recognized E89 Box Count: x 8 pieces x pieces 9 x pieces 8 x pieces x pieces
Microswitches MK series
D Microswitches MK series Introduction Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica (cross-reference at page
MEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
Ordering Information. Text PCB Power Relay G5LE
A Cubic, Single-pole 10-A Power Relay Single-pole 10A 35VDC, 0.8mm contact gap: G5LE-G Single-pole 16A 250VAC: G5LE-E ROHS compliant. Sub-miniature sugar cube relay with universal terminal footprint. Conforms
General Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
XMC0 Series. Definite Purpose Contactors
Description American Zettler XMC0 series of are electromechanical switching devices designed ideally for the HVAC industry. The most common applications of our contactors are found in refrigeration, air
MGJ1 Series 5.7kVDC Isolated 1W SM Gate Drive DC/DC Converters
www.murata-ps.com MGJ1 Series FEATURES Patent pending Optimised bipolar output voltages for IGBT/ SiC & MOSFET gate drives Reinforced insulation to UL69 recognised ANSI/AAMI ES661-1 recognition pending
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
MTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
HPS Fusion General Purpose Enclosed Transformer
HPS Fusion General Purpose Enclosed Transformer Our Company Hammond Power Solutions (HPS) was established in 1917 in Guelph, Ontario and has grown from a small family owned business in the short wave radio
R82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
Unit/Comments. %; Equal Output Loads %; Equal Output Loads Full Load
100 series Single, Dual, Triple Output DC/DC Converter DESCRIPTIONS FEATURES Synchronization 13.3W/In 3 Power Density Efficiency to 87% UL 190 Approved VDE / EN 90 Approved >700,000 Hours MTBF 6 sided
Encoder WDGA 58V CAN SAE J1939
Encoder WDGA 58V CAN SAE J1939 www.wachendorff-automation.com/wdga58vsaej1939 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
300 SERIES DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS
DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Diecast aluminium (anodised) Body Diecast aluminium (anodised) Pilot base Brass (chromed) Pilot Diaphragm NBR Bolts and screws
TM12 Series CIRCUIT BREAKERS FOR EQUIPMENT. Thermal magnetic release Positively trip-free Reset or manual actuation
CIRCUIT BREAKERS FOR EQUIPMENT TM Series Thermal magnetic release Positively trip-free Reset or manual actuation The TM circuit breaker for equipment (CBE) is a single pole, thermal-magnetically operated
Operating pressure (bar) kv factor (m 3 /h) *3)
/ poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar For
PSI FLANGE ISOLATION ACCESSORIES
PSI FLANGE ISOLATION ACCESSORIES PREVENTS CONTACT CORROSION AVAILABLE IN DIFFERENT SIZES, PRESSURE RATES AND MATERIALS ELECTRICAL ISOLATION WWW.PSI-PRODUCTS.COM 195 GENERAL INFORMATION Flange connection
Safety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
NXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
50 Hz Mini/Micro Computer Regulator (MCR) Series Installation and Operation Manual
Operating & Service Instructions Sola Minicomputer Regulators UL White Card Listed Power Supply Classification CSA Certified Transformer Classification General Description and Specifications The Sola Micro/Minicomputer
MGJ6 14mm Series 10.2kVDC Isolated 6W Gate Drive SM DC/DC Converters
www.murata-ps.com MGJ6 14mm Series 1.2kVDC Isolated 6W Gate Drive SM DC/DC Converters SELECTION GUIDE Output 1 Output 2 FEATURES Patents protected No opto feedback Optimised bipolar output voltages for
power table control transformers type EI 24 V XXXX DATE EI 66/XXXX EN ta 40 C/B Pri V/ Hz A Sec V/ A X1 B1 type dimensions [ mm ]
![power table control transformers type EI 24 V XXXX DATE EI 66/XXXX EN ta 40 C/B Pri V/ Hz A Sec V/ A X1 B1 type dimensions [ mm ]](/thumbs/91/107592652.jpg "power table control transformers type EI 24 V XXXX DATE EI 66/XXXX EN ta 40 C/B Pri V/ Hz A Sec V/ A X1 B1 type dimensions [ mm ]")
d V L power table control type EI control transformer satisfying VDE 55 / EN 6155-2-2 optional with primary voltage 4 V starting current approx. 1-times at style economy - approx. 15-times at compact optional:
C-L-X Aluminum Sheath Type IEC
COMPACT STRAND CONSTRUCTION C-L-X Aluminum Sheath A B C D E F G H J Conductor - Compact Stranded Copper Strand Screen - Extruded Semiconducting EPR Insulation - Okoguard EPR Insulation Screen - Extruded
OHIO MODEL RD-2A AUTO/MANUAL DROP MAGNET CONTROLLER INSTALLATION, MAINTENANCE, AND PARTS BULLETIN
OHIO MODEL RD-2A AUTO/MANUAL DROP CONTROLLER INSTALLATION, MAINTENANCE, AND PARTS BULLETIN OPERATING RANGE 100-150 A (COLD CURRENT) DESCRIPTION The RD-2A Controller is a heavy duty magnet controller used
IT 28 ELECTRICAL INSPECTOR EXAMINATION ANSWER SCHEDULE. Question 1 Marks Reference Marking notes. (1 mark) ESR 57(3)(e)(ii)
IT 28 ELECTRICAL INSPECTOR EXAMINATION ANSWER SCHEDULE Notes:1. means that the preceding statement/answer earns 1 mark. 2. This schedule sets out the expected answers to the examination questions. The
Mfg. Part No.* VA ACCESSORIES
Find Datasheets Online CONTROL HPS IMPERATOR MACHINE TOOL INDUSTRIAL CONTROL Up to 100VA 00V class 50/0 Hz Superior insulation system Constructed with high quality silicon steel laminations PRIMARY: 240/480,
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
XMC0 Series DEFINITE PURPOSE CONTACTORS
DESCRIPTION American Zettlers XMC0 series of Definite Purpose Contactors are electromechanical switching devices designed ideally for the HVAC industry. The most common applications of our contactors are
Cast resin transformers
Product catalogue Cast resin transformers according to IEC/EN 60076, VDE 0532, DIN 42523 Power range up to 8 MVA Voltage range up to 36 kv Conductor material: copper or aluminum Protection types: IP 00
Relax... you re in safe hands CONSUMER UNITS / PRODUCT GUIDE.
Relax... you re in safe hands CONSUMER UNITS / PRODUCT GUIDE Distributor : LEGRAND ELECTRIC LIMITED Great King Street North, Birmingham, B19 2LF Tel : 0870 608 9000 Fax : 0870 608 9004 CONSUMER UNIT BRO.10.05.??K
Flow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
HCA & HCA-RA SERIES Hermetically Sealed AC LVDT
& -RA SERIES SPECIFICATIONS Hermetically sealed, all welded Stainless steel housing MS type connector, glass sealed Axial or radial electrical connection IEC IP68 rating to 1,000 PSI [70 bars] Stroke ranges
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
ET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
Space Products. A subsidiary of Data Device Corporation
Space Products A subsidiary of Data Device Corporation QUALIFICATIONS AND CERTIFICATIONS Beta has manufactured space-qualified standard and custom products for over 15 years. This experience includes being
ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
NTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
Tel: &
C O N T R O L S BRITISH QUALITY COMPANY Split Core Current Transformers & Transducers Primary Currents from 50 to 5000 Amps Accuracy Class 1 & Class 0.5 1 Amp & 5 Amp Secondaries 0-333mV AC Transducer
SELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Safety Standard Recognized Ceramic s Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s)
Okoguard -Okoseal Type IEC
COMPACT STRAND CONSTRUCTION A B C D E F G H Conductor - Compact Stranded Copper Strand Screen - Extruded Semiconducting EPR Insulation - Okoguard EPR Insulation Screen - Extruded Semiconducting EPR Phase
Industrial Control Transformers
6 Industrial Control Transformers Section 6 Industrial Control Transformers provide a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids
400 SERIES MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS
MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium
High Voltage Bushing Wells for Pad Mounted Distribution Transformers Technical Guide
1ZUA2761-500 rev. 5, 6 April 2010 High Voltage Bushing Wells for Pad Mounted Distribution Transformers Technical Guide 1ZUA2761-500 rev. 5, 6 April 2010 2 / 9 Table of contents 1 Description... 3 2 Ratings...
MTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
Electronic Enclosures Technical Information 445/441 Panel Instrument Cases Acc. to DIN 43700/IEC 61554
Electronic Enclosures Technical Information 3. Switching and Control Panel (Switchboard) Instrument Cut Outs 2,5 t 3,2 Type l Permitted tolerance l2 Permitted tolerance X M 2 Specification for a switchboard
Thermal Overcurrent Circuit Breaker 3120-F...
Thermal Overcurrent Circuit Breaker 20-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (Stype TO CBE to EN 6094 with trip free mechanism) offering the choice of
We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
CURRENT TRANSFORMER MODEL N. SS BAND SECURES BRACKET (view of screw clamp band omitted for clarity) 0.25 x 0.50 SLOT (2 PLACES)
MODEL N 4." I.D. PAGE No 1-30 TERMINAL OPTION LEAD WIRE OPTION 6.75 SS BAND SECURES BRACKET (view of screw clamp band omitted for clarity) 0.75 1.36 1.16 5.75 7.00 0. x 0.50 SLOT (2 PLACES) UL 1015 #16
MIKRO 185 HETTICH DATA SHEET MICROLITRE CENTRIFUGE SMALL FOOTPRINT WITH UNMATCHED CAPACITY FEATURES HIGHLIGHTS
HETTICH DATA SHEET MICROLITRE CENTRIFUGE MIKRO 185 SMALL FOOTPRINT WITH UNMATCHED CAPACITY The MIKRO 185 accommodates 12, 18 or 24 samples and is suitable for a wide range of tasks, thanks to a maximum
MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
SELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com NML Series FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 85% Wide temperature performance at full 2 watt load, 40 C to 85 C Power density 2.01W/cm 3
General Specifications
Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications High Inrush 0 & 6 Amp Rockers Electrical Capacity (Resistive Load) Power Level: 0A @ 5/50V AC for